diff options
author | Dasky <[email protected]> | 2023-10-26 22:44:14 +0100 |
---|---|---|
committer | Dasky <[email protected]> | 2023-10-26 22:44:14 +0100 |
commit | c5716f84ada7f142c99cb89f685b06a0c9d8601b (patch) | |
tree | a99597277c8f79341177dd63c6d873db613537ec | |
parent | 372f1bf8cc3a8ace0cae5eb6d03d7df223815034 (diff) | |
parent | e0c00c35ce195dc0ab3f729235b9490dc69592ec (diff) | |
download | qmk_firmware-c5716f84ada7f142c99cb89f685b06a0c9d8601b.tar.gz qmk_firmware-c5716f84ada7f142c99cb89f685b06a0c9d8601b.zip |
Merge branch 'master' into develop
-rw-r--r-- | docs/serial_driver.md | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/docs/serial_driver.md b/docs/serial_driver.md index c4b42f38dd..b7e803154b 100644 --- a/docs/serial_driver.md +++ b/docs/serial_driver.md @@ -235,7 +235,7 @@ Where 'n' matches the peripheral number of your selected USART on the MCU. The `PIO` subsystem is a Raspberry Pi RP2040 specific implementation, using the integrated PIO peripheral and is therefore only available on this MCU. Because of the flexible nature of the PIO peripherals, **any** GPIO pin can be used as a `TX` or `RX` pin. Half-duplex and Full-duplex operation is fully supported. The Half-duplex operation mode uses the built-in pull-ups and GPIO manipulation on the RP2040 to drive the line high by default. An external pull-up is therefore not necessary. -Configure the hardware via your config.h: +You may optionally switch the PIO peripheral used with the following define in config.h: ```c #define SERIAL_PIO_USE_PIO1 // Force the usage of PIO1 peripheral, by default the Serial implementation uses the PIO0 peripheral ``` |