aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRyan <[email protected]>2025-01-21 09:53:46 +1100
committerGitHub <[email protected]>2025-01-20 22:53:46 +0000
commit68130cc8a5557ac997a4aa6c95c7f4c67d07229b (patch)
tree65e6f76bc815e0a6b8127a4b2799ebad62b3e484
parenta98070f21288fae025c6ffa2e08b775fb661bb4b (diff)
downloadqmk_firmware-68130cc8a5557ac997a4aa6c95c7f4c67d07229b.tar.gz
qmk_firmware-68130cc8a5557ac997a4aa6c95c7f4c67d07229b.zip
`ferris/0_1`: update I2C API usage (#24839)
-rw-r--r--keyboards/ferris/0_1/matrix.c45
-rw-r--r--keyboards/ferris/0_2/matrix.c3
-rw-r--r--platforms/avr/drivers/i2c_master.h3
3 files changed, 21 insertions, 30 deletions
diff --git a/keyboards/ferris/0_1/matrix.c b/keyboards/ferris/0_1/matrix.c
index a3e2bebba6..c05b193c1a 100644
--- a/keyboards/ferris/0_1/matrix.c
+++ b/keyboards/ferris/0_1/matrix.c
@@ -29,7 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "i2c_master.h"
extern i2c_status_t mcp23017_status;
-#define I2C_TIMEOUT 1000
+#define MCP23017_I2C_TIMEOUT 1000
// For a better understanding of the i2c protocol, this is a good read:
// https://www.robot-electronics.co.uk/i2c-tutorial
@@ -41,9 +41,7 @@ extern i2c_status_t mcp23017_status;
// All address pins of the mcp23017 are connected to the ground on the ferris
// | 0 | 1 | 0 | 0 | A2 | A1 | A0 |
// | 0 | 1 | 0 | 0 | 0 | 0 | 0 |
-#define I2C_ADDR 0b0100000
-#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE)
-#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ)
+#define I2C_ADDR (0b0100000 << 1)
// Register addresses
// See https://github.com/adafruit/Adafruit-MCP23017-Arduino-Library/blob/master/Adafruit_MCP23017.h
@@ -51,8 +49,8 @@ extern i2c_status_t mcp23017_status;
#define IODIRB 0x01
#define GPPUA 0x0C // GPIO pull-up resistor register
#define GPPUB 0x0D
-#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT)
-#define GPIOB 0x13
+#define MCP23017_GPIOA 0x12 // general purpose i/o port register (write modifies OLAT)
+#define MCP23017_GPIOB 0x13
#define OLATA 0x14 // output latch register
#define OLATB 0x15
@@ -60,14 +58,14 @@ bool i2c_initialized = 0;
i2c_status_t mcp23017_status = I2C_ADDR;
uint8_t init_mcp23017(void) {
- print("starting init");
+ print("init mcp23017\n");
mcp23017_status = I2C_ADDR;
// I2C subsystem
if (i2c_initialized == 0) {
i2c_init(); // on pins D(1,0)
i2c_initialized = true;
- wait_ms(I2C_TIMEOUT);
+ wait_ms(MCP23017_I2C_TIMEOUT);
}
// set pin direction
@@ -76,8 +74,10 @@ uint8_t init_mcp23017(void) {
// - driving : output : 0
// This means: we will read all the bits on GPIOA
// This means: we will write to the pins 0-4 on GPIOB (in select_rows)
- uint8_t buf[] = {IODIRA, 0b11111111, 0b11110000};
- mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT);
+ uint8_t buf[] = {0b11111111, 0b11110000};
+ print("before transmit\n");
+ mcp23017_status = i2c_write_register(I2C_ADDR, IODIRA, buf, sizeof(buf), MCP23017_I2C_TIMEOUT);
+ uprintf("after transmit %i\n", mcp23017_status);
if (!mcp23017_status) {
// set pull-up
// - unused : on : 1
@@ -85,8 +85,8 @@ uint8_t init_mcp23017(void) {
// - driving : off : 0
// This means: we will read all the bits on GPIOA
// This means: we will write to the pins 0-4 on GPIOB (in select_rows)
- uint8_t pullup_buf[] = {GPPUA, 0b11111111, 0b11110000};
- mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, pullup_buf, sizeof(pullup_buf), I2C_TIMEOUT);
+ mcp23017_status = i2c_write_register(I2C_ADDR, GPPUA, buf, sizeof(buf), MCP23017_I2C_TIMEOUT);
+ uprintf("after transmit2 %i\n", mcp23017_status);
}
return mcp23017_status;
}
@@ -144,12 +144,12 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
// if (++mcp23017_reset_loop >= 1300) {
// since mcp23017_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
// this will be approx bit more frequent than once per second
- dprint("trying to reset mcp23017\n");
+ print("trying to reset mcp23017\n");
mcp23017_status = init_mcp23017();
if (mcp23017_status) {
- dprint("right side not responding\n");
+ print("right side not responding\n");
} else {
- dprint("right side attached\n");
+ print("right side attached\n");
}
}
}
@@ -204,18 +204,13 @@ static matrix_row_t read_cols(uint8_t row) {
if (mcp23017_status) { // if there was an error
return 0;
} else {
- uint8_t buf[] = {GPIOA};
- mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT);
// We read all the pins on GPIOA.
// The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero.
// The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys.
// Since the pins connected to eact columns are sequential, and counting from zero up (col 5 -> GPIOA0, col 6 -> GPIOA1 and so on), the only transformation needed is a bitwise not to swap all zeroes and ones.
uint8_t data[] = {0};
- if (!mcp23017_status) {
- mcp23017_status = i2c_receive(I2C_ADDR_READ, data, sizeof(data), I2C_TIMEOUT);
- data[0] = ~(data[0]);
- }
- return data[0];
+ mcp23017_status = i2c_read_register(I2C_ADDR, MCP23017_GPIOA, data, sizeof(data), MCP23017_I2C_TIMEOUT);
+ return ~data[0];
}
}
}
@@ -236,7 +231,7 @@ static void unselect_rows(void) {
static void select_row(uint8_t row) {
if (row < MATRIX_ROWS_PER_SIDE) {
- // select on atmega32u4
+ // select on MCU
pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_MCU;
pin_t pin = matrix_row_pins_mcu[row];
gpio_set_pin_output(pin);
@@ -248,8 +243,8 @@ static void select_row(uint8_t row) {
} else {
// Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one.
// Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus.
- uint8_t buf[] = {GPIOB, 0xFF & ~(1 << (row - MATRIX_ROWS_PER_SIDE))};
- mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT);
+ uint8_t buf[] = {0xFF & ~(1 << (row - MATRIX_ROWS_PER_SIDE))};
+ mcp23017_status = i2c_write_register(I2C_ADDR, MCP23017_GPIOB, buf, sizeof(buf), MCP23017_I2C_TIMEOUT);
}
}
}
diff --git a/keyboards/ferris/0_2/matrix.c b/keyboards/ferris/0_2/matrix.c
index 74fab717a1..76bbcaf7b5 100644
--- a/keyboards/ferris/0_2/matrix.c
+++ b/keyboards/ferris/0_2/matrix.c
@@ -30,8 +30,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
extern i2c_status_t mcp23017_status;
#define MCP23017_I2C_TIMEOUT 1000
-#define I2C_WRITE 0x00
-#define I2C_READ 0x01
+
// For a better understanding of the i2c protocol, this is a good read:
// https://www.robot-electronics.co.uk/i2c-tutorial
diff --git a/platforms/avr/drivers/i2c_master.h b/platforms/avr/drivers/i2c_master.h
index 258bb2b9bf..ad92caa55a 100644
--- a/platforms/avr/drivers/i2c_master.h
+++ b/platforms/avr/drivers/i2c_master.h
@@ -21,9 +21,6 @@
#include <stdint.h>
-#define I2C_READ 0x01
-#define I2C_WRITE 0x00
-
typedef int16_t i2c_status_t;
#define I2C_STATUS_SUCCESS (0)