diff options
author | Ryan <[email protected]> | 2024-07-15 12:03:30 +1000 |
---|---|---|
committer | GitHub <[email protected]> | 2024-07-15 12:03:30 +1000 |
commit | 85447bd53b15b0be387336169feae1c7ff87f15c (patch) | |
tree | 5e28f54a13cd9e9b3f47489ea7fcb3be46c47241 /docs/drivers/is31fl3736.md | |
parent | 21b9b70c503da69d2567af100c3d5e3544664e4b (diff) | |
download | qmk_firmware-85447bd53b15b0be387336169feae1c7ff87f15c.tar.gz qmk_firmware-85447bd53b15b0be387336169feae1c7ff87f15c.zip |
LED drivers: extract documentation from LED/RGB Matrix pages (#23630)
Diffstat (limited to 'docs/drivers/is31fl3736.md')
-rw-r--r-- | docs/drivers/is31fl3736.md | 322 |
1 files changed, 322 insertions, 0 deletions
diff --git a/docs/drivers/is31fl3736.md b/docs/drivers/is31fl3736.md new file mode 100644 index 0000000000..b679a232cd --- /dev/null +++ b/docs/drivers/is31fl3736.md @@ -0,0 +1,322 @@ +# IS31FL3736 Driver {#is31fl3736-driver} + +I²C 12x8 LED matrix driver by Lumissil. Supports a maximum of four drivers, each controlling up to 96 single-color LEDs, or 32 RGB LEDs. + +[IS31FL3736 Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3736_DS.pdf) + +## Usage {#usage} + +The IS31FL3736 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3736` driver set, and you would use those APIs instead. + +However, if you need to use the driver standalone, add this to your `rules.mk`: + +```make +COMMON_VPATH += $(DRIVER_PATH)/led/issi +SRC += is31fl3736-mono.c # For single-color +SRC += is31fl3736.c # For RGB +I2C_DRIVER_REQUIRED = yes +``` + +## Basic Configuration {#basic-configuration} + +Add the following to your `config.h`: + +|Define |Default |Description | +|----------------------------|---------------------------------|----------------------------------------------------| +|`IS31FL3736_SDB_PIN` |*Not defined* |The GPIO pin connected to the drivers' shutdown pins| +|`IS31FL3736_I2C_TIMEOUT` |`100` |The I²C timeout in milliseconds | +|`IS31FL3736_I2C_PERSISTENCE`|`0` |The number of times to retry I²C transmissions | +|`IS31FL3736_I2C_ADDRESS_1` |*Not defined* |The I²C address of driver 0 | +|`IS31FL3736_I2C_ADDRESS_2` |*Not defined* |The I²C address of driver 1 | +|`IS31FL3736_I2C_ADDRESS_3` |*Not defined* |The I²C address of driver 2 | +|`IS31FL3736_I2C_ADDRESS_4` |*Not defined* |The I²C address of driver 3 | +|`IS31FL3736_PWM_FREQUENCY` |`IS31FL3736_PWM_FREQUENCY_8K4_HZ`|The PWM frequency of the LEDs (IS31FL3736B only) | +|`IS31FL3736_SW_PULLUP` |`IS31FL3736_PUR_0_OHM` |The `SWx` pullup resistor value | +|`IS31FL3736_CS_PULLDOWN` |`IS31FL3736_PDR_0_OHM` |The `CSx` pulldown resistor value | +|`IS31FL3736_GLOBAL_CURRENT` |`0xFF` |The global current control value | + +### I²C Addressing {#i2c-addressing} + +The IS31FL3736 has 16 possible 7-bit I²C addresses, depending on how the `ADDR1` and `ADDR2` pins are connected. + +To configure this, set the `IS31FL3736_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index: + +|Define |Value | +|--------------------------------|------| +|`IS31FL3736_I2C_ADDRESS_GND_GND`|`0x50`| +|`IS31FL3736_I2C_ADDRESS_GND_SCL`|`0x51`| +|`IS31FL3736_I2C_ADDRESS_GND_SDA`|`0x52`| +|`IS31FL3736_I2C_ADDRESS_GND_VCC`|`0x53`| +|`IS31FL3736_I2C_ADDRESS_SCL_GND`|`0x54`| +|`IS31FL3736_I2C_ADDRESS_SCL_SCL`|`0x55`| +|`IS31FL3736_I2C_ADDRESS_SCL_SDA`|`0x56`| +|`IS31FL3736_I2C_ADDRESS_SCL_VCC`|`0x57`| +|`IS31FL3736_I2C_ADDRESS_SDA_GND`|`0x58`| +|`IS31FL3736_I2C_ADDRESS_SDA_SCL`|`0x59`| +|`IS31FL3736_I2C_ADDRESS_SDA_SDA`|`0x5A`| +|`IS31FL3736_I2C_ADDRESS_SDA_VCC`|`0x5B`| +|`IS31FL3736_I2C_ADDRESS_VCC_GND`|`0x5C`| +|`IS31FL3736_I2C_ADDRESS_VCC_SCL`|`0x5D`| +|`IS31FL3736_I2C_ADDRESS_VCC_SDA`|`0x5E`| +|`IS31FL3736_I2C_ADDRESS_VCC_VCC`|`0x5F`| + +### PWM Frequency {#pwm-frequency} + +The PWM frequency can be adjusted (for IS31FL3736B only) by adding the following to your `config.h`: + +```c +#define IS31FL3736_PWM_FREQUENCY IS31FL3736_PWM_FREQUENCY_8K4_HZ +``` + +Valid values are: + +|Define |Frequency | +|----------------------------------|-----------------| +|`IS31FL3736_PWM_FREQUENCY_8K4_HZ` |8.4 kHz (default)| +|`IS31FL3736_PWM_FREQUENCY_4K2_HZ` |4.2 kHz | +|`IS31FL3736_PWM_FREQUENCY_26K7_HZ`|26.7 kHz | +|`IS31FL3736_PWM_FREQUENCY_2K1_HZ` |2.1 kHz | +|`IS31FL3736_PWM_FREQUENCY_1K05_HZ`|1.05 kHz | + +### De-Ghosting {#de-ghosting} + +These settings control the pullup and pulldown resistor values on the `SWy` and `CSx` pins respectively, for the purposes of eliminating ghosting. Refer to the datasheet (p. 25) for more information on how and why this occurs. + +To adjust the resistor values, add the following to your `config.h`: + +```c +#define IS31FL3736_SW_PULLUP IS31FL3736_PUR_0_OHM +#define IS31FL3736_CS_PULLDOWN IS31FL3736_PDR_0_OHM +``` + +Valid values for `IS31FL3736_SW_PULLUP` are: + +|Define |Resistance | +|------------------------|--------------| +|`IS31FL3736_PUR_0_OHM` |None (default)| +|`IS31FL3736_PUR_0K5_OHM`|0.5 kΩ | +|`IS31FL3736_PUR_1K_OHM` |1 kΩ | +|`IS31FL3736_PUR_2K_OHM` |2 kΩ | +|`IS31FL3736_PUR_4K_OHM` |4 kΩ | +|`IS31FL3736_PUR_8K_OHM` |8 kΩ | +|`IS31FL3736_PUR_16K_OHM`|16 kΩ | +|`IS31FL3736_PUR_32K_OHM`|32 kΩ | + +Valid values for `IS31FL3736_CS_PULLDOWN` are: + +|Define |Resistance | +|------------------------|--------------| +|`IS31FL3736_PDR_0_OHM` |None (default)| +|`IS31FL3736_PDR_0K5_OHM`|0.5 kΩ | +|`IS31FL3736_PDR_1K_OHM` |1 kΩ | +|`IS31FL3736_PDR_2K_OHM` |2 kΩ | +|`IS31FL3736_PDR_4K_OHM` |4 kΩ | +|`IS31FL3736_PDR_8K_OHM` |8 kΩ | +|`IS31FL3736_PDR_16K_OHM`|16 kΩ | +|`IS31FL3736_PDR_32K_OHM`|32 kΩ | + +### Global Current Control {#global-current-control} + +This setting controls the current sunk by the `CSx` pins, from 0 to 255. By default, the value is the maximum (255), but if you need to lower it, add the following to your `config.h`: + +```c +#define IS31FL3736_GLOBAL_CURRENT 0xFF +``` + +## ARM/ChibiOS Configuration {#arm-configuration} + +Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level. + +## LED Mapping {#led-mapping} + +In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`: + +```c +const is31fl3736_led_t PROGMEM g_is31fl3736_leds[IS31FL3736_LED_COUNT] = { +/* Driver + * | R G B */ + {0, SW1_CS1, SW1_CS2, SW1_CS3}, + // etc... +}; +``` + +In this example, the red, green and blue channels for the first LED index on driver 0 all have their cathodes connected to the `SW1` pin, and their anodes on the `CS1`, `CS2` and `CS3` pins respectively. + +For the single-color driver, the principle is the same, but there is only one channel: + +```c +const is31fl3736_led_t PROGMEM g_is31fl3736_leds[IS31FL3736_LED_COUNT] = { +/* Driver + * | V */ + {0, SW1_CS1}, + // etc... +}; +``` + +These values correspond to the register indices as shown in the datasheet on page 16, figure 9. + +## API {#api} + +### `struct is31fl3736_led_t` {#api-is31fl3736-led-t} + +Contains the PWM register addresses for a single RGB LED. + +#### Members {#api-is31fl3736-led-t-members} + + - `uint8_t driver` + The driver index of the LED, from 0 to 3. + - `uint8_t r` + The output PWM register address for the LED's red channel (RGB driver only). + - `uint8_t g` + The output PWM register address for the LED's green channel (RGB driver only). + - `uint8_t b` + The output PWM register address for the LED's blue channel (RGB driver only). + - `uint8_t v` + The output PWM register address for the LED (single-color driver only). + +--- + +### `void is31fl3736_init(uint8_t index)` {#api-is31fl3736-init} + +Initialize the LED driver. This function should be called first. + +#### Arguments {#api-is31fl3736-init-arguments} + + - `uint8_t index` + The driver index. + +--- + +### `void is31fl3736_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-is31fl3736-write-register} + +Set the value of the given register. + +#### Arguments {#api-is31fl3736-write-register-arguments} + + - `uint8_t index` + The driver index. + - `uint8_t reg` + The register address. + - `uint8_t data` + The value to set. + +--- + +### `void is31fl3736_select_page(uint8_t index, uint8_t page)` {#api-is31fl3736-select-page} + +Change the current page for configuring the LED driver. + +#### Arguments {#api-is31fl3736-select-page-arguments} + + - `uint8_t index` + The driver index. + - `uint8_t page` + The page number to select. + +--- + +### `void is31fl3736_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3736-set-color} + +Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3736_update_pwm_buffers()` after you are finished. + +#### Arguments {#api-is31fl3736-set-color-arguments} + + - `int index` + The LED index (ie. the index into the `g_is31fl3736_leds` array). + - `uint8_t red` + The red value to set. + - `uint8_t green` + The green value to set. + - `uint8_t blue` + The blue value to set. + +--- + +### `void is31fl3736_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3736-set-color-all} + +Set the color of all LEDs (RGB driver only). + +#### Arguments {#api-is31fl3736-set-color-all-arguments} + + - `uint8_t red` + The red value to set. + - `uint8_t green` + The green value to set. + - `uint8_t blue` + The blue value to set. + +--- + +### `void is31fl3736_set_value(int index, uint8_t value)` {#api-is31fl3736-set-value} + +Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3736_update_pwm_buffers()` after you are finished. + +#### Arguments {#api-is31fl3736-set-value-arguments} + + - `int index` + The LED index (ie. the index into the `g_is31fl3736_leds` array). + - `uint8_t value` + The brightness value to set. + +--- + +### `void is31fl3736_set_value_all(uint8_t value)` {#api-is31fl3736-set-value-all} + +Set the brightness of all LEDs (single-color driver only). + +#### Arguments {#api-is31fl3736-set-value-all-arguments} + + - `uint8_t value` + The brightness value to set. + +--- + +### `void is31fl3736_set_led_control_register(uint8_t index, bool red, bool green, bool blue)` {#api-is31fl3736-set-led-control-register-rgb} + +Configure the LED control registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3736_update_led_control_registers()` after you are finished. + +#### Arguments {#api-is31fl3736-set-led-control-register-rgb-arguments} + + - `uint8_t index` + The LED index (ie. the index into the `g_is31fl3736_leds` array). + - `bool red` + Enable or disable the red channel. + - `bool green` + Enable or disable the green channel. + - `bool blue` + Enable or disable the blue channel. + +--- + +### `void is31fl3736_set_led_control_register(uint8_t index, bool value)` {#api-is31fl3736-set-led-control-register-mono} + +Configure the LED control registers for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3736_update_led_control_registers()` after you are finished. + +#### Arguments {#api-is31fl3736-set-led-control-register-mono-arguments} + + - `uint8_t index` + The LED index (ie. the index into the `g_is31fl3736_leds` array). + - `bool value` + Enable or disable the LED. + +--- + +### `void is31fl3736_update_pwm_buffers(uint8_t index)` {#api-is31fl3736-update-pwm-buffers} + +Flush the PWM values to the LED driver. + +#### Arguments {#api-is31fl3736-update-pwm-buffers-arguments} + + - `uint8_t index` + The driver index. + +--- + +### `void is31fl3736_update_led_control_registers(uint8_t index)` {#api-is31fl3736-update-led-control-registers} + +Flush the LED control register values to the LED driver. + +#### Arguments {#api-is31fl3736-update-led-control-registers-arguments} + + - `uint8_t index` + The driver index. |