diff options
author | dlgoodr <[email protected]> | 2022-01-11 12:07:51 -0600 |
---|---|---|
committer | GitHub <[email protected]> | 2022-01-11 10:07:51 -0800 |
commit | 349ca4b7ff0c98baedbeb9096442231e2267c817 (patch) | |
tree | ae6a4137798f1f48496a983802970850629db9f2 /keyboards/handwired/3dfoxc/readme.md | |
parent | 1df37114320b816fe318316bce705d772859c610 (diff) | |
download | qmk_firmware-349ca4b7ff0c98baedbeb9096442231e2267c817.tar.gz qmk_firmware-349ca4b7ff0c98baedbeb9096442231e2267c817.zip |
[Keyboard] handwire: 3dfoxc (#15739)
Co-authored-by: Drashna Jaelre <[email protected]>
Diffstat (limited to 'keyboards/handwired/3dfoxc/readme.md')
-rw-r--r-- | keyboards/handwired/3dfoxc/readme.md | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/keyboards/handwired/3dfoxc/readme.md b/keyboards/handwired/3dfoxc/readme.md new file mode 100644 index 0000000000..3d6e33a5c1 --- /dev/null +++ b/keyboards/handwired/3dfoxc/readme.md @@ -0,0 +1,42 @@ +# 3dfoxc + +![3dfoxc](https://cdn.thingiverse.com/assets/12/3a/3e/5f/47/64A223C2-57E8-4124-B6AB-3031A0BA7973.jpeg) + +A [3d-printed whitefox](https://www.thingiverse.com/thing:2952008) with an Elite-C microcontroller. + +This is a build of [matt3o's "How to Build a Custom Keyboard" guide](https://matt3o.com/book/), except that I have replaced the Teensy with an [Elite-C v4](https://keeb.io/products/elite-c-low-profile-version-usb-c-pro-micro-replacement-atmega32u4). Presumably you could replace it with anything compatible. The USB-C port had to be enlarged with dremel, and the mount for the Teensy was ground off and replaced with everyone's favorite rapid modeling polymer ... hot glue. + +* Keyboard Maintainer: [david l goodrich](mailto:[email protected]) +* Hardware Supported: + * [3d-printed whitefox](https://www.thingiverse.com/thing:2952008) + * Elite-C microcontroller +* Hardware Availability: [keebio](https://keeb.io/products/elite-c-low-profile-version-usb-c-pro-micro-replacement-atmega32u4), [1up](https://1upkeyboards.com/shop/controllers/elite-c-v4-controller/), [keyhive](https://keyhive.xyz/shop/elite-c), [splitkb](https://splitkb.com/products/elite-c-low-profile-rev4-microcontroller) + +## Wiring + +Badly, because I have never done this before. Build pics available upon request, I guess. + +![wiring diagram](https://user-images.githubusercontent.com/6492494/148123622-36cae91e-97f3-40f7-a6fc-4d59b1a3ef02.png) + + +## Flashing + +Make example for this keyboard (after setting up your build environment): + + make handwired/3dfoxc:default + +Flashing example for this keyboard (use the `dfu` target for the Elite-C!): + + make handwired/3dfoxc:default:dfu + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + + |