diff options
author | Jason Barnachea <[email protected]> | 2018-02-10 14:24:54 -0800 |
---|---|---|
committer | Jack Humbert <[email protected]> | 2018-02-10 17:24:54 -0500 |
commit | a972b262748efe977d9a0f8f47fdc36dc9c787e3 (patch) | |
tree | 84a8e6bd8c49a740b48d2c1e9ca051cf9ae9d1a4 /keyboards/jc65/rules.mk | |
parent | 8c2ae4a4701439e98569dc2f2acee7016b4c0f20 (diff) | |
download | qmk_firmware-a972b262748efe977d9a0f8f47fdc36dc9c787e3.tar.gz qmk_firmware-a972b262748efe977d9a0f8f47fdc36dc9c787e3.zip |
Add JC65 ps2avrGB keyboard (#2351)
* Adds JC65 ps2avrGB keyboard
* Adds default keymap
* Adds personal keymap
* Backlight On/off support
Migrated code from the BFake. Functionality only on BL_ON, BL_OFF,
BL_TOGG.
* Backlighting config adjustment
Only 1 level supported.
* Personal keymap update
BL toggle added and RGB layer updates.
* Renamed jc65 ps2avrgb directory
Renamed directory for more clarity.
* Default keymap and default rules
* Personal keymap and personal rules
* Group JC65 QMK and PS2 versions
Group JC65 QMK and PS2 versions, Split directories, Readme for parent
folder.
* Default keycaps and personal keymaps re-added
Default and personal keymaps re-added. Keymaps, Readme, Rules.mk, and
config.h
* v32a default keymap rules
Default to no.
* RGB and Backlight default settings
Set to yes.
* Rules.mk defaults for personal keymap
Rules.mk defaults for personal keymap
* Revised keyboard readme make paths
Revised.
* Path correction
* jc65 default folder set
set default pcb to qmk version
* default rules for v32a
set to enable backlight and rgb by default.
Diffstat (limited to 'keyboards/jc65/rules.mk')
-rw-r--r-- | keyboards/jc65/rules.mk | 69 |
1 files changed, 1 insertions, 68 deletions
diff --git a/keyboards/jc65/rules.mk b/keyboards/jc65/rules.mk index c2c02b6147..050e22e3ca 100644 --- a/keyboards/jc65/rules.mk +++ b/keyboards/jc65/rules.mk @@ -1,68 +1 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 +DEFAULT_FOLDER = jc65/v32u4
\ No newline at end of file |