diff options
author | George Mao <[email protected]> | 2020-06-13 23:39:57 -0700 |
---|---|---|
committer | James Young <[email protected]> | 2020-06-13 23:45:47 -0700 |
commit | 622e94c6cdf6a307ee87b6add974def647979f15 (patch) | |
tree | 4d305a46f2cb1eb9b90f1b1477f101fdc152f2fe /keyboards/s7_elephant/readme.md | |
parent | ba7f52aaeba878544973952ca3fcce27ab4bb92d (diff) | |
download | qmk_firmware-622e94c6cdf6a307ee87b6add974def647979f15.tar.gz qmk_firmware-622e94c6cdf6a307ee87b6add974def647979f15.zip |
[Keyboard] Add S7 Elephant Rev2 Support (#9398)
* Add S7 Elephant Rev2 Support
* Apply suggestions from code review
I tested the changes on my board as well, thanks for the suggestions!
* Added a default folder in the makefile so that this would no longer be a breaking change
Diffstat (limited to 'keyboards/s7_elephant/readme.md')
-rw-r--r-- | keyboards/s7_elephant/readme.md | 11 |
1 files changed, 7 insertions, 4 deletions
diff --git a/keyboards/s7_elephant/readme.md b/keyboards/s7_elephant/readme.md index 466e3f7316..76838be218 100644 --- a/keyboards/s7_elephant/readme.md +++ b/keyboards/s7_elephant/readme.md @@ -4,13 +4,16 @@ A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. -Keyboard Maintainer: QMK Community -Hardware Supported: S7 Elephant -Hardware Availability: [The GB has ended with little chance to run again.](https://geekhack.org/index.php?topic=96434.0) +**Firmware files are SPECIFIC to each revision. Firmware files from rev1 will not work on rev2 and vice versa.** Please use the `.hex` appropriate for your board. + +* Keyboard Maintainer: QMK Community +* Hardware Supported: S7 Elephant rev1, rev2 +* Hardware Availability: [The GB has had 2 rounds with little chance to run again.](https://geekhack.org/index.php?topic=96434.0) Make example for this keyboard (after setting up your build environment): - make s7_elephant:default:dfu + make s7_elephant/rev1:default # 2018 run + make s7_elephant/rev2:default # 2019 run To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer. |