diff options
author | Nick Brassel <[email protected]> | 2024-08-26 10:01:57 +1000 |
---|---|---|
committer | Nick Brassel <[email protected]> | 2024-08-26 10:01:57 +1000 |
commit | 5d76c5280dc0aff398cdce19fa54d0e0725c418d (patch) | |
tree | 40026340f0d524a6006f18f01ef988e15d271075 /keyboards/splitkb/kyria/rev2/config.h | |
parent | e6a898e3eea3521d3f0497ee26937d5269d78fb7 (diff) | |
parent | 81dcf2b547bacc42bd9cf8ccaccd3d7164e69926 (diff) | |
download | qmk_firmware-5d76c5280dc0aff398cdce19fa54d0e0725c418d.tar.gz qmk_firmware-5d76c5280dc0aff398cdce19fa54d0e0725c418d.zip |
Merge branch 'develop'0.26.0
Diffstat (limited to 'keyboards/splitkb/kyria/rev2/config.h')
-rw-r--r-- | keyboards/splitkb/kyria/rev2/config.h | 31 |
1 files changed, 2 insertions, 29 deletions
diff --git a/keyboards/splitkb/kyria/rev2/config.h b/keyboards/splitkb/kyria/rev2/config.h index 54d8f0985a..fb9e7bb959 100644 --- a/keyboards/splitkb/kyria/rev2/config.h +++ b/keyboards/splitkb/kyria/rev2/config.h @@ -19,34 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // Side detection // col 4 row 3 on right-hand-side -#define SPLIT_HAND_MATRIX_GRID E6, B3 // row first because the board is col2row #define MATRIX_MASKED // actual mask is defined by `matrix_mask` in `rev2.c` -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ - -#if defined(CONVERT_TO_PROTON_C) -# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. -# define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve. -# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1 -# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 -# define SERIAL_USART_TX_PIN D3 -# define SERIAL_USART_RX_PIN D2 - -# define WS2812_DI_PIN PAL_LINE(GPIOA, 3) -# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 -# define WS2812_PWM_CHANNEL 4 // default: 2 -# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 -# define WS2812_PWM_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -# define WS2812_PWM_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -# define WS2812_PWM_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU. -#else -# define WS2812_DI_PIN D3 -# define SOFT_SERIAL_PIN D2 -#endif - -#ifdef OLED_ENABLE -# define OLED_DISPLAY_128X64 -# define SPLIT_OLED_ENABLE -#endif +#define OLED_DISPLAY_128X64 +#define SPLIT_OLED_ENABLE |