diff options
author | QMK Bot <[email protected]> | 2022-02-12 10:29:31 -0800 |
---|---|---|
committer | GitHub <[email protected]> | 2022-02-12 18:29:31 +0000 |
commit | 63646e8906e062d1c1de3925cba70c4e3426a855 (patch) | |
tree | 4e91648b77b838e1125cf86331d7e84bde6d07a9 /platforms/chibios/drivers/ws2812.c | |
parent | afcdd7079c774dec2aa4b7f2d08adf8b7310919b (diff) | |
download | qmk_firmware-63646e8906e062d1c1de3925cba70c4e3426a855.tar.gz qmk_firmware-63646e8906e062d1c1de3925cba70c4e3426a855.zip |
Format code according to conventions (#16322)
Diffstat (limited to 'platforms/chibios/drivers/ws2812.c')
-rw-r--r-- | platforms/chibios/drivers/ws2812.c | 10 |
1 files changed, 6 insertions, 4 deletions
diff --git a/platforms/chibios/drivers/ws2812.c b/platforms/chibios/drivers/ws2812.c index 7e870661de..1b3bb59842 100644 --- a/platforms/chibios/drivers/ws2812.c +++ b/platforms/chibios/drivers/ws2812.c @@ -10,7 +10,7 @@ # define NOP_FUDGE 0.4 # else # error("NOP_FUDGE configuration required") -# define NOP_FUDGE 1 // this just pleases the compile so the above error is easier to spot +# define NOP_FUDGE 1 // this just pleases the compile so the above error is easier to spot # endif #endif @@ -25,12 +25,12 @@ // The reset gap can be 6000 ns, but depending on the LED strip it may have to be increased // to values like 600000 ns. If it is too small, the pixels will show nothing most of the time. #ifndef WS2812_RES -# define WS2812_RES (1000 * WS2812_TRST_US) // Width of the low gap between bits to cause a frame to latch +# define WS2812_RES (1000 * WS2812_TRST_US) // Width of the low gap between bits to cause a frame to latch #endif #define NUMBER_NOPS 6 #define CYCLES_PER_SEC (CPU_CLOCK / NUMBER_NOPS * NOP_FUDGE) -#define NS_PER_SEC (1000000000L) // Note that this has to be SIGNED since we want to be able to check for negative values of derivatives +#define NS_PER_SEC (1000000000L) // Note that this has to be SIGNED since we want to be able to check for negative values of derivatives #define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) #define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) @@ -67,7 +67,9 @@ void sendByte(uint8_t byte) { } } -void ws2812_init(void) { palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE); } +void ws2812_init(void) { + palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE); +} // Setleds for standard RGB void ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) { |