diff options
69 files changed, 2563 insertions, 8236 deletions
| diff --git a/build_keyboard.mk b/build_keyboard.mk index 4108704875..b4e1efd9ee 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -16,7 +16,6 @@ include common.mk  KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))  TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)  KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE) -STM32_PATH := quantum/stm32  # Force expansion  TARGET := $(TARGET) @@ -138,7 +137,7 @@ endif  ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)      TARGET := $(TARGET)_proton_c -    include $(STM32_PATH)/proton_c.mk +    include platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk      OPT_DEFS += -DCONVERT_TO_PROTON_C  endif @@ -148,12 +147,6 @@ endif  include quantum/mcu_selection.mk -ifdef MCU_FAMILY -    OPT_DEFS += -DQMK_STM32 -    KEYBOARD_PATHS += $(STM32_PATH) -endif - -  # Find all the C source files to be compiled in subfolders.  KEYBOARD_SRC := diff --git a/drivers/boards/BLACKPILL_STM32_F401/board.c b/drivers/boards/BLACKPILL_STM32_F401/board.c deleted file mode 100644 index 330e06c8aa..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/board.c +++ /dev/null @@ -1,250 +0,0 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" -#include "stm32_gpio.h" - -/*===========================================================================*/ -/* Driver local definitions.                                                 */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables.                                                */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types.                                         */ -/*===========================================================================*/ - -/** - * @brief   Type of STM32 GPIO port setup. - */ -typedef struct { -    uint32_t moder; -    uint32_t otyper; -    uint32_t ospeedr; -    uint32_t pupdr; -    uint32_t odr; -    uint32_t afrl; -    uint32_t afrh; -} gpio_setup_t; - -/** - * @brief   Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) -    gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) -    gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) -    gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) -    gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) -    gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) -    gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) -    gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) -    gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) -    gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) -    gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) -    gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief   STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA -    {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB -    {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC -    {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD -    {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE -    {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF -    {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG -    {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH -    {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI -    {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ -    {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK -    {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions.                                                   */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { -    gpiop->OTYPER  = config->otyper; -    gpiop->OSPEEDR = config->ospeedr; -    gpiop->PUPDR   = config->pupdr; -    gpiop->ODR     = config->odr; -    gpiop->AFRL    = config->afrl; -    gpiop->AFRH    = config->afrh; -    gpiop->MODER   = config->moder; -} - -static void stm32_gpio_init(void) { -    /* Enabling GPIO-related clocks, the mask comes from the -       registry header file.*/ -    rccResetAHB1(STM32_GPIO_EN_MASK); -    rccEnableAHB1(STM32_GPIO_EN_MASK, true); - -    /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA -    gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB -    gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC -    gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD -    gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE -    gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF -    gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG -    gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH -    gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI -    gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ -    gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK -    gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers.                                                */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions.                                                */ -/*===========================================================================*/ - -__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} - -/** - * @brief   Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - *          else. - */ -void __early_init(void) { -    enter_bootloader_mode_if_requested(); - -    stm32_gpio_init(); -    stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief   SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { -    (void)sdcp; -    /* TODO: Fill the implementation.*/ -    return true; -} - -/** - * @brief   SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { -    (void)sdcp; -    /* TODO: Fill the implementation.*/ -    return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief   MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { -    (void)mmcp; -    /* TODO: Fill the implementation.*/ -    return true; -} - -/** - * @brief   MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { -    (void)mmcp; -    /* TODO: Fill the implementation.*/ -    return false; -} -#endif - -/** - * @brief   Board-specific initialization code. - * @todo    Add your board-specific code, if any. - */ -void boardInit(void) {} diff --git a/drivers/boards/BLACKPILL_STM32_F401/board.h b/drivers/boards/BLACKPILL_STM32_F401/board.h deleted file mode 100644 index 2d1cd9ff72..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/board.h +++ /dev/null @@ -1,568 +0,0 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/*===========================================================================*/ -/* Driver constants.                                                         */ -/*===========================================================================*/ - -/* - * Setup for STM32F401CCU6 black pill board. - */ - -/* - * Board identifier. - */ -#define BOARD_BLACKPILL_STM32_F401 -#define BOARD_NAME "STM32F401CCU6 blackpill" - -/* - * Allow Board to boot USB without extra A9 hardware/software config - */ -#define BOARD_OTG_NOVBUSSENS 1 - -/* - * Board oscillators-related settings. - */ -#if !defined(STM32_LSECLK) -#    define STM32_LSECLK 32768U -#endif - -#if !defined(STM32_HSECLK) -#    define STM32_HSECLK 25000000U -#endif - -/* - * Board voltages. - * Required for performance limits calculation. - */ -#define STM32_VDD 300U - -/* - * MCU type as defined in the ST header. - */ -#define STM32F401xC - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_CS43L22_LRCK 4U -#define GPIOA_L3GD20_SCL 5U -#define GPIOA_L3GD20_SD0 6U -#define GPIOA_L3GD20_SDI 7U -#define GPIOA_PIN8 8U -#define GPIOA_VBUS_FS 9U -#define GPIOA_OTG_FS_ID 10U -#define GPIOA_OTG_FS_DM 11U -#define GPIOA_OTG_FS_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_SWO 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_LSM303DLHC_SCL 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_LSM303DLHC_SDA 9U -#define GPIOB_MP45DT02_CLK_IN 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_PIN13 13U -#define GPIOB_PIN14 14U -#define GPIOB_PIN15 15U - -#define GPIOC_OTG_FS_POWER_ON 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_CS43L22_AIN4x 3U -#define GPIOC_MP45DT02_PDM_OUT 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_PIN6 6U -#define GPIOC_CS43L22_MCLK 7U -#define GPIOC_PIN8 8U -#define GPIOC_PIN9 9U -#define GPIOC_CS43L22_SCLK 10U -#define GPIOC_PIN11 11U -#define GPIOC_CS43L22_SDIN 12U -#define GPIOC_PIN13 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_CS43L22_RESET 4U -#define GPIOD_OverCurrent 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_LED4 12U -#define GPIOD_LED3 13U -#define GPIOD_LED5 14U -#define GPIOD_LED6 15U - -#define GPIOE_L3GD20_INT1 0U -#define GPIOE_L3GD20_INT2 1U -#define GPIOE_LSM303DLHC_DRDY 2U -#define GPIOE_L3GD20_CS 3U -#define GPIOE_LSM303DLHC_INT1 4U -#define GPIOE_LSM303DLHC_INT2 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_PIN0 0U -#define GPIOF_PIN1 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -#define GPIOG_PIN0 0U -#define GPIOG_PIN1 1U -#define GPIOG_PIN2 2U -#define GPIOG_PIN3 3U -#define GPIOG_PIN4 4U -#define GPIOG_PIN5 5U -#define GPIOG_PIN6 6U -#define GPIOG_PIN7 7U -#define GPIOG_PIN8 8U -#define GPIOG_PIN9 9U -#define GPIOG_PIN10 10U -#define GPIOG_PIN11 11U -#define GPIOG_PIN12 12U -#define GPIOG_PIN13 13U -#define GPIOG_PIN14 14U -#define GPIOG_PIN15 15U - -#define GPIOH_OSC_IN 0U -#define GPIOH_OSC_OUT 1U -#define GPIOH_PIN2 2U -#define GPIOH_PIN3 3U -#define GPIOH_PIN4 4U -#define GPIOH_PIN5 5U -#define GPIOH_PIN6 6U -#define GPIOH_PIN7 7U -#define GPIOH_PIN8 8U -#define GPIOH_PIN9 9U -#define GPIOH_PIN10 10U -#define GPIOH_PIN11 11U -#define GPIOH_PIN12 12U -#define GPIOH_PIN13 13U -#define GPIOH_PIN14 14U -#define GPIOH_PIN15 15U - -#define GPIOI_PIN0 0U -#define GPIOI_PIN1 1U -#define GPIOI_PIN2 2U -#define GPIOI_PIN3 3U -#define GPIOI_PIN4 4U -#define GPIOI_PIN5 5U -#define GPIOI_PIN6 6U -#define GPIOI_PIN7 7U -#define GPIOI_PIN8 8U -#define GPIOI_PIN9 9U -#define GPIOI_PIN10 10U -#define GPIOI_PIN11 11U -#define GPIOI_PIN12 12U -#define GPIOI_PIN13 13U -#define GPIOI_PIN14 14U -#define GPIOI_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_BUTTON PAL_LINE(GPIOA, 0U) -#define LINE_CS43L22_LRCK PAL_LINE(GPIOA, 4U) -#define LINE_L3GD20_SCL PAL_LINE(GPIOA, 5U) -#define LINE_L3GD20_SD0 PAL_LINE(GPIOA, 6U) -#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U) -#define LINE_VBUS_FS PAL_LINE(GPIOA, 9U) -#define LINE_OTG_FS_ID PAL_LINE(GPIOA, 10U) -#define LINE_OTG_FS_DM PAL_LINE(GPIOA, 11U) -#define LINE_OTG_FS_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) -#define LINE_SWO PAL_LINE(GPIOB, 3U) -#define LINE_LSM303DLHC_SCL PAL_LINE(GPIOB, 6U) -#define LINE_LSM303DLHC_SDA PAL_LINE(GPIOB, 9U) -#define LINE_MP45DT02_CLK_IN PAL_LINE(GPIOB, 10U) -#define LINE_OTG_FS_POWER_ON PAL_LINE(GPIOC, 0U) -#define LINE_CS43L22_AIN4x PAL_LINE(GPIOC, 3U) -#define LINE_MP45DT02_PDM_OUT PAL_LINE(GPIOC, 3U) -#define LINE_CS43L22_MCLK PAL_LINE(GPIOC, 7U) -#define LINE_CS43L22_SCLK PAL_LINE(GPIOC, 10U) -#define LINE_CS43L22_SDIN PAL_LINE(GPIOC, 12U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) -#define LINE_CS43L22_RESET PAL_LINE(GPIOD, 4U) -#define LINE_OverCurrent PAL_LINE(GPIOD, 5U) -#define LINE_LED4 PAL_LINE(GPIOD, 12U) -#define LINE_LED3 PAL_LINE(GPIOD, 13U) -#define LINE_LED5 PAL_LINE(GPIOD, 14U) -#define LINE_LED6 PAL_LINE(GPIOD, 15U) -#define LINE_L3GD20_INT1 PAL_LINE(GPIOE, 0U) -#define LINE_L3GD20_INT2 PAL_LINE(GPIOE, 1U) -#define LINE_LSM303DLHC_DRDY PAL_LINE(GPIOE, 2U) -#define LINE_L3GD20_CS PAL_LINE(GPIOE, 3U) -#define LINE_LSM303DLHC_INT1 PAL_LINE(GPIOE, 4U) -#define LINE_LSM303DLHC_INT2 PAL_LINE(GPIOE, 5U) -#define LINE_OSC_IN PAL_LINE(GPIOH, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOH, 1U) - -/*===========================================================================*/ -/* Driver pre-compile time settings.                                         */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks.                                       */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types.                                         */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros.                                                            */ -/*===========================================================================*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n)*2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n)*2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n)*2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0  - BUTTON                    (input floating). - * PA1  - PIN1                      (input pullup). - * PA2  - PIN2                      (input pullup). - * PA3  - PIN3                      (input pullup). - * PA4  - CS43L22_LRCK              (alternate 6). - * PA5  - L3GD20_SCL                (alternate 5). - * PA6  - L3GD20_SD0                (alternate 5). - * PA7  - L3GD20_SDI                (alternate 5). - * PA8  - PIN8                      (input pullup). - * PA9  - VBUS_FS                   (input floating). - * PA10 - OTG_FS_ID                 (alternate 10). - * PA11 - OTG_FS_DM                 (alternate 10). - * PA12 - OTG_FS_DP                 (alternate 10). - * PA13 - SWDIO                     (alternate 0). - * PA14 - SWCLK                     (alternate 0). - * PA15 - PIN15                     (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | PIN_MODE_INPUT(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_ALTERNATE(GPIOA_CS43L22_LRCK) | PIN_MODE_ALTERNATE(GPIOA_L3GD20_SCL) | PIN_MODE_ALTERNATE(GPIOA_L3GD20_SD0) | PIN_MODE_ALTERNATE(GPIOA_L3GD20_SDI) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_VBUS_FS) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_ID) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | PIN_OTYPE_PUSHPULL(GPIOA_CS43L22_LRCK) | PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SCL) | PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SD0) | PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SDI) | PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | PIN_OTYPE_PUSHPULL(GPIOA_VBUS_FS) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_ID) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_HIGH(GPIOA_BUTTON) | PIN_OSPEED_HIGH(GPIOA_PIN1) | PIN_OSPEED_HIGH(GPIOA_PIN2) | PIN_OSPEED_HIGH(GPIOA_PIN3) | PIN_OSPEED_HIGH(GPIOA_CS43L22_LRCK) | PIN_OSPEED_HIGH(GPIOA_L3GD20_SCL) | PIN_OSPEED_HIGH(GPIOA_L3GD20_SD0) | PIN_OSPEED_HIGH(GPIOA_L3GD20_SDI) | PIN_OSPEED_HIGH(GPIOA_PIN8) | PIN_OSPEED_HIGH(GPIOA_VBUS_FS) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_ID) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | PIN_PUPDR_PULLUP(GPIOA_PIN1) | PIN_PUPDR_PULLUP(GPIOA_PIN2) | PIN_PUPDR_PULLUP(GPIOA_PIN3) | PIN_PUPDR_FLOATING(GPIOA_CS43L22_LRCK) | PIN_PUPDR_FLOATING(GPIOA_L3GD20_SCL) | PIN_PUPDR_PULLUP(GPIOA_L3GD20_SD0) | PIN_PUPDR_PULLUP(GPIOA_L3GD20_SDI) | PIN_PUPDR_PULLUP(GPIOA_PIN8) | PIN_PUPDR_FLOATING(GPIOA_VBUS_FS) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_ID) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | PIN_PUPDR_FLOATING(GPIOA_SWDIO) | PIN_PUPDR_FLOATING(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | PIN_ODR_HIGH(GPIOA_PIN1) | PIN_ODR_HIGH(GPIOA_PIN2) | PIN_ODR_HIGH(GPIOA_PIN3) | PIN_ODR_HIGH(GPIOA_CS43L22_LRCK) | PIN_ODR_HIGH(GPIOA_L3GD20_SCL) | PIN_ODR_HIGH(GPIOA_L3GD20_SD0) | PIN_ODR_HIGH(GPIOA_L3GD20_SDI) | PIN_ODR_HIGH(GPIOA_PIN8) | PIN_ODR_HIGH(GPIOA_VBUS_FS) | PIN_ODR_HIGH(GPIOA_OTG_FS_ID) | PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | PIN_AFIO_AF(GPIOA_PIN1, 0U) | PIN_AFIO_AF(GPIOA_PIN2, 0U) | PIN_AFIO_AF(GPIOA_PIN3, 0U) | PIN_AFIO_AF(GPIOA_CS43L22_LRCK, 6U) | PIN_AFIO_AF(GPIOA_L3GD20_SCL, 5U) | PIN_AFIO_AF(GPIOA_L3GD20_SD0, 5U) | PIN_AFIO_AF(GPIOA_L3GD20_SDI, 5U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | PIN_AFIO_AF(GPIOA_VBUS_FS, 0U) | PIN_AFIO_AF(GPIOA_OTG_FS_ID, 10U) | PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0  - PIN0                      (input pullup). - * PB1  - PIN1                      (input pullup). - * PB2  - PIN2                      (input pullup). - * PB3  - SWO                       (alternate 0). - * PB4  - PIN4                      (input pullup). - * PB5  - PIN5                      (input pullup). - * PB6  - LSM303DLHC_SCL            (alternate 4). - * PB7  - PIN7                      (input pullup). - * PB8  - PIN8                      (input pullup). - * PB9  - LSM303DLHC_SDA            (alternate 4). - * PB10 - MP45DT02_CLK_IN           (alternate 5). - * PB11 - PIN11                     (input pullup). - * PB12 - PIN12                     (input pullup). - * PB13 - PIN13                     (input pullup). - * PB14 - PIN14                     (input pullup). - * PB15 - PIN15                     (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_ALTERNATE(GPIOB_SWO) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_ALTERNATE(GPIOB_LSM303DLHC_SCL) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_ALTERNATE(GPIOB_LSM303DLHC_SDA) | PIN_MODE_ALTERNATE(GPIOB_MP45DT02_CLK_IN) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_INPUT(GPIOB_PIN13) | PIN_MODE_INPUT(GPIOB_PIN14) | PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_SWO) | PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | PIN_OTYPE_PUSHPULL(GPIOB_LSM303DLHC_SCL) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | PIN_OTYPE_PUSHPULL(GPIOB_LSM303DLHC_SDA) | PIN_OTYPE_PUSHPULL(GPIOB_MP45DT02_CLK_IN) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_HIGH(GPIOB_PIN0) | PIN_OSPEED_HIGH(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_SWO) | PIN_OSPEED_HIGH(GPIOB_PIN4) | PIN_OSPEED_HIGH(GPIOB_PIN5) | PIN_OSPEED_HIGH(GPIOB_LSM303DLHC_SCL) | PIN_OSPEED_HIGH(GPIOB_PIN7) | PIN_OSPEED_HIGH(GPIOB_PIN8) | PIN_OSPEED_HIGH(GPIOB_LSM303DLHC_SDA) | PIN_OSPEED_HIGH(GPIOB_MP45DT02_CLK_IN) | PIN_OSPEED_HIGH(GPIOB_PIN11) | PIN_OSPEED_HIGH(GPIOB_PIN12) | PIN_OSPEED_HIGH(GPIOB_PIN13) | PIN_OSPEED_HIGH(GPIOB_PIN14) | PIN_OSPEED_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_SWO) | PIN_PUPDR_PULLUP(GPIOB_PIN4) | PIN_PUPDR_PULLUP(GPIOB_PIN5) | PIN_PUPDR_FLOATING(GPIOB_LSM303DLHC_SCL) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_PIN8) | PIN_PUPDR_FLOATING(GPIOB_LSM303DLHC_SDA) | PIN_PUPDR_FLOATING(GPIOB_MP45DT02_CLK_IN) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_PULLUP(GPIOB_PIN13) | PIN_PUPDR_PULLUP(GPIOB_PIN14) | PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_SWO) | PIN_ODR_HIGH(GPIOB_PIN4) | PIN_ODR_HIGH(GPIOB_PIN5) | PIN_ODR_HIGH(GPIOB_LSM303DLHC_SCL) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_PIN8) | PIN_ODR_HIGH(GPIOB_LSM303DLHC_SDA) | PIN_ODR_HIGH(GPIOB_MP45DT02_CLK_IN) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_PIN13) | PIN_ODR_HIGH(GPIOB_PIN14) | PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_SWO, 0U) | PIN_AFIO_AF(GPIOB_PIN4, 0U) | PIN_AFIO_AF(GPIOB_PIN5, 0U) | PIN_AFIO_AF(GPIOB_LSM303DLHC_SCL, 4U) | PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | PIN_AFIO_AF(GPIOB_LSM303DLHC_SDA, 4U) | PIN_AFIO_AF(GPIOB_MP45DT02_CLK_IN, 5U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_PIN13, 0U) | PIN_AFIO_AF(GPIOB_PIN14, 0U) | PIN_AFIO_AF(GPIOB_PIN15, 0U)) - -/* - * GPIOC setup: - * - * PC0  - OTG_FS_POWER_ON           (output pushpull maximum). - * PC1  - PIN1                      (input pullup). - * PC2  - PIN2                      (input pullup). - * PC3  - CS43L22_AIN4x MP45DT02_PDM_OUT(alternate 5). - * PC4  - PIN4                      (input pullup). - * PC5  - PIN5                      (input pullup). - * PC6  - PIN6                      (input pullup). - * PC7  - CS43L22_MCLK              (alternate 6). - * PC8  - PIN8                      (input pullup). - * PC9  - PIN9                      (input pullup). - * PC10 - CS43L22_SCLK              (alternate 6). - * PC11 - PIN11                     (input pullup). - * PC12 - CS43L22_SDIN              (alternate 6). - * PC13 - PIN13                     (input pullup). - * PC14 - OSC32_IN                  (input floating). - * PC15 - OSC32_OUT                 (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_OTG_FS_POWER_ON) | PIN_MODE_INPUT(GPIOC_PIN1) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_AIN4x) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_INPUT(GPIOC_PIN6) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_MCLK) | PIN_MODE_INPUT(GPIOC_PIN8) | PIN_MODE_INPUT(GPIOC_PIN9) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_SCLK) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_SDIN) | PIN_MODE_INPUT(GPIOC_PIN13) | PIN_MODE_INPUT(GPIOC_OSC32_IN) | PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_OTG_FS_POWER_ON) | PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_AIN4x) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_MCLK) | PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_SCLK) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_SDIN) | PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_OTG_FS_POWER_ON) | PIN_OSPEED_HIGH(GPIOC_PIN1) | PIN_OSPEED_HIGH(GPIOC_PIN2) | PIN_OSPEED_HIGH(GPIOC_CS43L22_AIN4x) | PIN_OSPEED_HIGH(GPIOC_PIN4) | PIN_OSPEED_HIGH(GPIOC_PIN5) | PIN_OSPEED_HIGH(GPIOC_PIN6) | PIN_OSPEED_HIGH(GPIOC_CS43L22_MCLK) | PIN_OSPEED_HIGH(GPIOC_PIN8) | PIN_OSPEED_HIGH(GPIOC_PIN9) | PIN_OSPEED_HIGH(GPIOC_CS43L22_SCLK) | PIN_OSPEED_HIGH(GPIOC_PIN11) | PIN_OSPEED_HIGH(GPIOC_CS43L22_SDIN) | PIN_OSPEED_HIGH(GPIOC_PIN13) | PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_OTG_FS_POWER_ON) | PIN_PUPDR_PULLUP(GPIOC_PIN1) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_FLOATING(GPIOC_CS43L22_AIN4x) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_PULLUP(GPIOC_PIN6) | PIN_PUPDR_PULLUP(GPIOC_CS43L22_MCLK) | PIN_PUPDR_PULLUP(GPIOC_PIN8) | PIN_PUPDR_PULLUP(GPIOC_PIN9) | PIN_PUPDR_PULLUP(GPIOC_CS43L22_SCLK) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_CS43L22_SDIN) | PIN_PUPDR_PULLUP(GPIOC_PIN13) | PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_OTG_FS_POWER_ON) | PIN_ODR_HIGH(GPIOC_PIN1) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_CS43L22_AIN4x) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_HIGH(GPIOC_PIN6) | PIN_ODR_HIGH(GPIOC_CS43L22_MCLK) | PIN_ODR_HIGH(GPIOC_PIN8) | PIN_ODR_HIGH(GPIOC_PIN9) | PIN_ODR_HIGH(GPIOC_CS43L22_SCLK) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_CS43L22_SDIN) | PIN_ODR_HIGH(GPIOC_PIN13) | PIN_ODR_HIGH(GPIOC_OSC32_IN) | PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_OTG_FS_POWER_ON, 0U) | PIN_AFIO_AF(GPIOC_PIN1, 0U) | PIN_AFIO_AF(GPIOC_PIN2, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_AIN4x, 5U) | PIN_AFIO_AF(GPIOC_PIN4, 0U) | PIN_AFIO_AF(GPIOC_PIN5, 0U) | PIN_AFIO_AF(GPIOC_PIN6, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_MCLK, 6U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | PIN_AFIO_AF(GPIOC_PIN9, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_SCLK, 6U) | PIN_AFIO_AF(GPIOC_PIN11, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_SDIN, 6U) | PIN_AFIO_AF(GPIOC_PIN13, 0U) | PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0  - PIN0                      (input pullup). - * PD1  - PIN1                      (input pullup). - * PD2  - PIN2                      (input pullup). - * PD3  - PIN3                      (input pullup). - * PD4  - CS43L22_RESET             (output pushpull maximum). - * PD5  - OverCurrent               (input floating). - * PD6  - PIN6                      (input pullup). - * PD7  - PIN7                      (input pullup). - * PD8  - PIN8                      (input pullup). - * PD9  - PIN9                      (input pullup). - * PD10 - PIN10                     (input pullup). - * PD11 - PIN11                     (input pullup). - * PD12 - LED4                      (output pushpull maximum). - * PD13 - LED3                      (output pushpull maximum). - * PD14 - LED5                      (output pushpull maximum). - * PD15 - LED6                      (output pushpull maximum). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_OUTPUT(GPIOD_CS43L22_RESET) | PIN_MODE_INPUT(GPIOD_OverCurrent) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_OUTPUT(GPIOD_LED4) | PIN_MODE_OUTPUT(GPIOD_LED3) | PIN_MODE_OUTPUT(GPIOD_LED5) | PIN_MODE_OUTPUT(GPIOD_LED6)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_CS43L22_RESET) | PIN_OTYPE_PUSHPULL(GPIOD_OverCurrent) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_LED4) | PIN_OTYPE_PUSHPULL(GPIOD_LED3) | PIN_OTYPE_PUSHPULL(GPIOD_LED5) | PIN_OTYPE_PUSHPULL(GPIOD_LED6)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | PIN_OSPEED_HIGH(GPIOD_PIN1) | PIN_OSPEED_HIGH(GPIOD_PIN2) | PIN_OSPEED_HIGH(GPIOD_PIN3) | PIN_OSPEED_HIGH(GPIOD_CS43L22_RESET) | PIN_OSPEED_HIGH(GPIOD_OverCurrent) | PIN_OSPEED_HIGH(GPIOD_PIN6) | PIN_OSPEED_HIGH(GPIOD_PIN7) | PIN_OSPEED_HIGH(GPIOD_PIN8) | PIN_OSPEED_HIGH(GPIOD_PIN9) | PIN_OSPEED_HIGH(GPIOD_PIN10) | PIN_OSPEED_HIGH(GPIOD_PIN11) | PIN_OSPEED_HIGH(GPIOD_LED4) | PIN_OSPEED_HIGH(GPIOD_LED3) | PIN_OSPEED_HIGH(GPIOD_LED5) | PIN_OSPEED_HIGH(GPIOD_LED6)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_CS43L22_RESET) | PIN_PUPDR_FLOATING(GPIOD_OverCurrent) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_FLOATING(GPIOD_LED4) | PIN_PUPDR_FLOATING(GPIOD_LED3) | PIN_PUPDR_FLOATING(GPIOD_LED5) | PIN_PUPDR_FLOATING(GPIOD_LED6)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_CS43L22_RESET) | PIN_ODR_HIGH(GPIOD_OverCurrent) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_LOW(GPIOD_LED4) | PIN_ODR_LOW(GPIOD_LED3) | PIN_ODR_LOW(GPIOD_LED5) | PIN_ODR_LOW(GPIOD_LED6)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | PIN_AFIO_AF(GPIOD_PIN1, 0U) | PIN_AFIO_AF(GPIOD_PIN2, 0U) | PIN_AFIO_AF(GPIOD_PIN3, 0U) | PIN_AFIO_AF(GPIOD_CS43L22_RESET, 0U) | PIN_AFIO_AF(GPIOD_OverCurrent, 0U) | PIN_AFIO_AF(GPIOD_PIN6, 0U) | PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | PIN_AFIO_AF(GPIOD_PIN9, 0U) | PIN_AFIO_AF(GPIOD_PIN10, 0U) | PIN_AFIO_AF(GPIOD_PIN11, 0U) | PIN_AFIO_AF(GPIOD_LED4, 0U) | PIN_AFIO_AF(GPIOD_LED3, 0U) | PIN_AFIO_AF(GPIOD_LED5, 0U) | PIN_AFIO_AF(GPIOD_LED6, 0U)) - -/* - * GPIOE setup: - * - * PE0  - L3GD20_INT1               (input pullup). - * PE1  - L3GD20_INT2               (input pullup). - * PE2  - LSM303DLHC_DRDY           (input floating). - * PE3  - L3GD20_CS                 (output pushpull maximum). - * PE4  - LSM303DLHC_INT1           (output pushpull maximum). - * PE5  - LSM303DLHC_INT2           (output pushpull maximum). - * PE6  - PIN6                      (input pullup). - * PE7  - PIN7                      (input pullup). - * PE8  - PIN8                      (input pullup). - * PE9  - PIN9                      (input pullup). - * PE10 - PIN10                     (input pullup). - * PE11 - PIN11                     (input pullup). - * PE12 - PIN12                     (input pullup). - * PE13 - PIN13                     (input pullup). - * PE14 - PIN14                     (input pullup). - * PE15 - PIN15                     (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_L3GD20_INT1) | PIN_MODE_INPUT(GPIOE_L3GD20_INT2) | PIN_MODE_INPUT(GPIOE_LSM303DLHC_DRDY) | PIN_MODE_OUTPUT(GPIOE_L3GD20_CS) | PIN_MODE_OUTPUT(GPIOE_LSM303DLHC_INT1) | PIN_MODE_OUTPUT(GPIOE_LSM303DLHC_INT2) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_INPUT(GPIOE_PIN8) | PIN_MODE_INPUT(GPIOE_PIN9) | PIN_MODE_INPUT(GPIOE_PIN10) | PIN_MODE_INPUT(GPIOE_PIN11) | PIN_MODE_INPUT(GPIOE_PIN12) | PIN_MODE_INPUT(GPIOE_PIN13) | PIN_MODE_INPUT(GPIOE_PIN14) | PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_INT1) | PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_INT2) | PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_DRDY) | PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_CS) | PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_INT1) | PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_INT2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_L3GD20_INT1) | PIN_OSPEED_HIGH(GPIOE_L3GD20_INT2) | PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_DRDY) | PIN_OSPEED_HIGH(GPIOE_L3GD20_CS) | PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_INT1) | PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_INT2) | PIN_OSPEED_HIGH(GPIOE_PIN6) | PIN_OSPEED_HIGH(GPIOE_PIN7) | PIN_OSPEED_HIGH(GPIOE_PIN8) | PIN_OSPEED_HIGH(GPIOE_PIN9) | PIN_OSPEED_HIGH(GPIOE_PIN10) | PIN_OSPEED_HIGH(GPIOE_PIN11) | PIN_OSPEED_HIGH(GPIOE_PIN12) | PIN_OSPEED_HIGH(GPIOE_PIN13) | PIN_OSPEED_HIGH(GPIOE_PIN14) | PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_L3GD20_INT1) | PIN_PUPDR_PULLUP(GPIOE_L3GD20_INT2) | PIN_PUPDR_FLOATING(GPIOE_LSM303DLHC_DRDY) | PIN_PUPDR_PULLUP(GPIOE_L3GD20_CS) | PIN_PUPDR_PULLUP(GPIOE_LSM303DLHC_INT1) | PIN_PUPDR_PULLUP(GPIOE_LSM303DLHC_INT2) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_PULLUP(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_PULLUP(GPIOE_PIN13) | PIN_PUPDR_PULLUP(GPIOE_PIN14) | PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_L3GD20_INT1) | PIN_ODR_HIGH(GPIOE_L3GD20_INT2) | PIN_ODR_HIGH(GPIOE_LSM303DLHC_DRDY) | PIN_ODR_HIGH(GPIOE_L3GD20_CS) | PIN_ODR_HIGH(GPIOE_LSM303DLHC_INT1) | PIN_ODR_HIGH(GPIOE_LSM303DLHC_INT2) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_HIGH(GPIOE_PIN8) | PIN_ODR_HIGH(GPIOE_PIN9) | PIN_ODR_HIGH(GPIOE_PIN10) | PIN_ODR_HIGH(GPIOE_PIN11) | PIN_ODR_HIGH(GPIOE_PIN12) | PIN_ODR_HIGH(GPIOE_PIN13) | PIN_ODR_HIGH(GPIOE_PIN14) | PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_L3GD20_INT1, 0U) | PIN_AFIO_AF(GPIOE_L3GD20_INT2, 0U) | PIN_AFIO_AF(GPIOE_LSM303DLHC_DRDY, 0U) | PIN_AFIO_AF(GPIOE_L3GD20_CS, 0U) | PIN_AFIO_AF(GPIOE_LSM303DLHC_INT1, 0U) | PIN_AFIO_AF(GPIOE_LSM303DLHC_INT2, 0U) | PIN_AFIO_AF(GPIOE_PIN6, 0U) | PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | PIN_AFIO_AF(GPIOE_PIN9, 0U) | PIN_AFIO_AF(GPIOE_PIN10, 0U) | PIN_AFIO_AF(GPIOE_PIN11, 0U) | PIN_AFIO_AF(GPIOE_PIN12, 0U) | PIN_AFIO_AF(GPIOE_PIN13, 0U) | PIN_AFIO_AF(GPIOE_PIN14, 0U) | PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0  - PIN0                      (input pullup). - * PF1  - PIN1                      (input pullup). - * PF2  - PIN2                      (input pullup). - * PF3  - PIN3                      (input pullup). - * PF4  - PIN4                      (input pullup). - * PF5  - PIN5                      (input pullup). - * PF6  - PIN6                      (input pullup). - * PF7  - PIN7                      (input pullup). - * PF8  - PIN8                      (input pullup). - * PF9  - PIN9                      (input pullup). - * PF10 - PIN10                     (input pullup). - * PF11 - PIN11                     (input pullup). - * PF12 - PIN12                     (input pullup). - * PF13 - PIN13                     (input pullup). - * PF14 - PIN14                     (input pullup). - * PF15 - PIN15                     (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | PIN_MODE_INPUT(GPIOF_PIN1) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | PIN_OSPEED_HIGH(GPIOF_PIN1) | PIN_OSPEED_HIGH(GPIOF_PIN2) | PIN_OSPEED_HIGH(GPIOF_PIN3) | PIN_OSPEED_HIGH(GPIOF_PIN4) | PIN_OSPEED_HIGH(GPIOF_PIN5) | PIN_OSPEED_HIGH(GPIOF_PIN6) | PIN_OSPEED_HIGH(GPIOF_PIN7) | PIN_OSPEED_HIGH(GPIOF_PIN8) | PIN_OSPEED_HIGH(GPIOF_PIN9) | PIN_OSPEED_HIGH(GPIOF_PIN10) | PIN_OSPEED_HIGH(GPIOF_PIN11) | PIN_OSPEED_HIGH(GPIOF_PIN12) | PIN_OSPEED_HIGH(GPIOF_PIN13) | PIN_OSPEED_HIGH(GPIOF_PIN14) | PIN_OSPEED_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | PIN_PUPDR_PULLUP(GPIOF_PIN1) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | PIN_ODR_HIGH(GPIOF_PIN1) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | PIN_AFIO_AF(GPIOF_PIN1, 0U) | PIN_AFIO_AF(GPIOF_PIN2, 0U) | PIN_AFIO_AF(GPIOF_PIN3, 0U) | PIN_AFIO_AF(GPIOF_PIN4, 0U) | PIN_AFIO_AF(GPIOF_PIN5, 0U) | PIN_AFIO_AF(GPIOF_PIN6, 0U) | PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | PIN_AFIO_AF(GPIOF_PIN9, 0U) | PIN_AFIO_AF(GPIOF_PIN10, 0U) | PIN_AFIO_AF(GPIOF_PIN11, 0U) | PIN_AFIO_AF(GPIOF_PIN12, 0U) | PIN_AFIO_AF(GPIOF_PIN13, 0U) | PIN_AFIO_AF(GPIOF_PIN14, 0U) | PIN_AFIO_AF(GPIOF_PIN15, 0U)) - -/* - * GPIOG setup: - * - * PG0  - PIN0                      (input pullup). - * PG1  - PIN1                      (input pullup). - * PG2  - PIN2                      (input pullup). - * PG3  - PIN3                      (input pullup). - * PG4  - PIN4                      (input pullup). - * PG5  - PIN5                      (input pullup). - * PG6  - PIN6                      (input pullup). - * PG7  - PIN7                      (input pullup). - * PG8  - PIN8                      (input pullup). - * PG9  - PIN9                      (input pullup). - * PG10 - PIN10                     (input pullup). - * PG11 - PIN11                     (input pullup). - * PG12 - PIN12                     (input pullup). - * PG13 - PIN13                     (input pullup). - * PG14 - PIN14                     (input pullup). - * PG15 - PIN15                     (input pullup). - */ -#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | PIN_MODE_INPUT(GPIOG_PIN1) | PIN_MODE_INPUT(GPIOG_PIN2) | PIN_MODE_INPUT(GPIOG_PIN3) | PIN_MODE_INPUT(GPIOG_PIN4) | PIN_MODE_INPUT(GPIOG_PIN5) | PIN_MODE_INPUT(GPIOG_PIN6) | PIN_MODE_INPUT(GPIOG_PIN7) | PIN_MODE_INPUT(GPIOG_PIN8) | PIN_MODE_INPUT(GPIOG_PIN9) | PIN_MODE_INPUT(GPIOG_PIN10) | PIN_MODE_INPUT(GPIOG_PIN11) | PIN_MODE_INPUT(GPIOG_PIN12) | PIN_MODE_INPUT(GPIOG_PIN13) | PIN_MODE_INPUT(GPIOG_PIN14) | PIN_MODE_INPUT(GPIOG_PIN15)) -#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) -#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | PIN_OSPEED_HIGH(GPIOG_PIN1) | PIN_OSPEED_HIGH(GPIOG_PIN2) | PIN_OSPEED_HIGH(GPIOG_PIN3) | PIN_OSPEED_HIGH(GPIOG_PIN4) | PIN_OSPEED_HIGH(GPIOG_PIN5) | PIN_OSPEED_HIGH(GPIOG_PIN6) | PIN_OSPEED_HIGH(GPIOG_PIN7) | PIN_OSPEED_HIGH(GPIOG_PIN8) | PIN_OSPEED_HIGH(GPIOG_PIN9) | PIN_OSPEED_HIGH(GPIOG_PIN10) | PIN_OSPEED_HIGH(GPIOG_PIN11) | PIN_OSPEED_HIGH(GPIOG_PIN12) | PIN_OSPEED_HIGH(GPIOG_PIN13) | PIN_OSPEED_HIGH(GPIOG_PIN14) | PIN_OSPEED_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | PIN_PUPDR_PULLUP(GPIOG_PIN1) | PIN_PUPDR_PULLUP(GPIOG_PIN2) | PIN_PUPDR_PULLUP(GPIOG_PIN3) | PIN_PUPDR_PULLUP(GPIOG_PIN4) | PIN_PUPDR_PULLUP(GPIOG_PIN5) | PIN_PUPDR_PULLUP(GPIOG_PIN6) | PIN_PUPDR_PULLUP(GPIOG_PIN7) | PIN_PUPDR_PULLUP(GPIOG_PIN8) | PIN_PUPDR_PULLUP(GPIOG_PIN9) | PIN_PUPDR_PULLUP(GPIOG_PIN10) | PIN_PUPDR_PULLUP(GPIOG_PIN11) | PIN_PUPDR_PULLUP(GPIOG_PIN12) | PIN_PUPDR_PULLUP(GPIOG_PIN13) | PIN_PUPDR_PULLUP(GPIOG_PIN14) | PIN_PUPDR_PULLUP(GPIOG_PIN15)) -#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | PIN_ODR_HIGH(GPIOG_PIN1) | PIN_ODR_HIGH(GPIOG_PIN2) | PIN_ODR_HIGH(GPIOG_PIN3) | PIN_ODR_HIGH(GPIOG_PIN4) | PIN_ODR_HIGH(GPIOG_PIN5) | PIN_ODR_HIGH(GPIOG_PIN6) | PIN_ODR_HIGH(GPIOG_PIN7) | PIN_ODR_HIGH(GPIOG_PIN8) | PIN_ODR_HIGH(GPIOG_PIN9) | PIN_ODR_HIGH(GPIOG_PIN10) | PIN_ODR_HIGH(GPIOG_PIN11) | PIN_ODR_HIGH(GPIOG_PIN12) | PIN_ODR_HIGH(GPIOG_PIN13) | PIN_ODR_HIGH(GPIOG_PIN14) | PIN_ODR_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | PIN_AFIO_AF(GPIOG_PIN1, 0U) | PIN_AFIO_AF(GPIOG_PIN2, 0U) | PIN_AFIO_AF(GPIOG_PIN3, 0U) | PIN_AFIO_AF(GPIOG_PIN4, 0U) | PIN_AFIO_AF(GPIOG_PIN5, 0U) | PIN_AFIO_AF(GPIOG_PIN6, 0U) | PIN_AFIO_AF(GPIOG_PIN7, 0U)) -#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | PIN_AFIO_AF(GPIOG_PIN9, 0U) | PIN_AFIO_AF(GPIOG_PIN10, 0U) | PIN_AFIO_AF(GPIOG_PIN11, 0U) | PIN_AFIO_AF(GPIOG_PIN12, 0U) | PIN_AFIO_AF(GPIOG_PIN13, 0U) | PIN_AFIO_AF(GPIOG_PIN14, 0U) | PIN_AFIO_AF(GPIOG_PIN15, 0U)) - -/* - * GPIOH setup: - * - * PH0  - OSC_IN                    (input floating). - * PH1  - OSC_OUT                   (input floating). - * PH2  - PIN2                      (input pullup). - * PH3  - PIN3                      (input pullup). - * PH4  - PIN4                      (input pullup). - * PH5  - PIN5                      (input pullup). - * PH6  - PIN6                      (input pullup). - * PH7  - PIN7                      (input pullup). - * PH8  - PIN8                      (input pullup). - * PH9  - PIN9                      (input pullup). - * PH10 - PIN10                     (input pullup). - * PH11 - PIN11                     (input pullup). - * PH12 - PIN12                     (input pullup). - * PH13 - PIN13                     (input pullup). - * PH14 - PIN14                     (input pullup). - * PH15 - PIN15                     (input pullup). - */ -#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | PIN_MODE_INPUT(GPIOH_OSC_OUT) | PIN_MODE_INPUT(GPIOH_PIN2) | PIN_MODE_INPUT(GPIOH_PIN3) | PIN_MODE_INPUT(GPIOH_PIN4) | PIN_MODE_INPUT(GPIOH_PIN5) | PIN_MODE_INPUT(GPIOH_PIN6) | PIN_MODE_INPUT(GPIOH_PIN7) | PIN_MODE_INPUT(GPIOH_PIN8) | PIN_MODE_INPUT(GPIOH_PIN9) | PIN_MODE_INPUT(GPIOH_PIN10) | PIN_MODE_INPUT(GPIOH_PIN11) | PIN_MODE_INPUT(GPIOH_PIN12) | PIN_MODE_INPUT(GPIOH_PIN13) | PIN_MODE_INPUT(GPIOH_PIN14) | PIN_MODE_INPUT(GPIOH_PIN15)) -#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) -#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | PIN_OSPEED_HIGH(GPIOH_PIN2) | PIN_OSPEED_HIGH(GPIOH_PIN3) | PIN_OSPEED_HIGH(GPIOH_PIN4) | PIN_OSPEED_HIGH(GPIOH_PIN5) | PIN_OSPEED_HIGH(GPIOH_PIN6) | PIN_OSPEED_HIGH(GPIOH_PIN7) | PIN_OSPEED_HIGH(GPIOH_PIN8) | PIN_OSPEED_HIGH(GPIOH_PIN9) | PIN_OSPEED_HIGH(GPIOH_PIN10) | PIN_OSPEED_HIGH(GPIOH_PIN11) | PIN_OSPEED_HIGH(GPIOH_PIN12) | PIN_OSPEED_HIGH(GPIOH_PIN13) | PIN_OSPEED_HIGH(GPIOH_PIN14) | PIN_OSPEED_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | PIN_PUPDR_PULLUP(GPIOH_PIN2) | PIN_PUPDR_PULLUP(GPIOH_PIN3) | PIN_PUPDR_PULLUP(GPIOH_PIN4) | PIN_PUPDR_PULLUP(GPIOH_PIN5) | PIN_PUPDR_PULLUP(GPIOH_PIN6) | PIN_PUPDR_PULLUP(GPIOH_PIN7) | PIN_PUPDR_PULLUP(GPIOH_PIN8) | PIN_PUPDR_PULLUP(GPIOH_PIN9) | PIN_PUPDR_PULLUP(GPIOH_PIN10) | PIN_PUPDR_PULLUP(GPIOH_PIN11) | PIN_PUPDR_PULLUP(GPIOH_PIN12) | PIN_PUPDR_PULLUP(GPIOH_PIN13) | PIN_PUPDR_PULLUP(GPIOH_PIN14) | PIN_PUPDR_PULLUP(GPIOH_PIN15)) -#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | PIN_ODR_HIGH(GPIOH_OSC_OUT) | PIN_ODR_HIGH(GPIOH_PIN2) | PIN_ODR_HIGH(GPIOH_PIN3) | PIN_ODR_HIGH(GPIOH_PIN4) | PIN_ODR_HIGH(GPIOH_PIN5) | PIN_ODR_HIGH(GPIOH_PIN6) | PIN_ODR_HIGH(GPIOH_PIN7) | PIN_ODR_HIGH(GPIOH_PIN8) | PIN_ODR_HIGH(GPIOH_PIN9) | PIN_ODR_HIGH(GPIOH_PIN10) | PIN_ODR_HIGH(GPIOH_PIN11) | PIN_ODR_HIGH(GPIOH_PIN12) | PIN_ODR_HIGH(GPIOH_PIN13) | PIN_ODR_HIGH(GPIOH_PIN14) | PIN_ODR_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | PIN_AFIO_AF(GPIOH_PIN2, 0U) | PIN_AFIO_AF(GPIOH_PIN3, 0U) | PIN_AFIO_AF(GPIOH_PIN4, 0U) | PIN_AFIO_AF(GPIOH_PIN5, 0U) | PIN_AFIO_AF(GPIOH_PIN6, 0U) | PIN_AFIO_AF(GPIOH_PIN7, 0U)) -#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | PIN_AFIO_AF(GPIOH_PIN9, 0U) | PIN_AFIO_AF(GPIOH_PIN10, 0U) | PIN_AFIO_AF(GPIOH_PIN11, 0U) | PIN_AFIO_AF(GPIOH_PIN12, 0U) | PIN_AFIO_AF(GPIOH_PIN13, 0U) | PIN_AFIO_AF(GPIOH_PIN14, 0U) | PIN_AFIO_AF(GPIOH_PIN15, 0U)) - -/* - * GPIOI setup: - * - * PI0  - PIN0                      (input pullup). - * PI1  - PIN1                      (input pullup). - * PI2  - PIN2                      (input pullup). - * PI3  - PIN3                      (input pullup). - * PI4  - PIN4                      (input pullup). - * PI5  - PIN5                      (input pullup). - * PI6  - PIN6                      (input pullup). - * PI7  - PIN7                      (input pullup). - * PI8  - PIN8                      (input pullup). - * PI9  - PIN9                      (input pullup). - * PI10 - PIN10                     (input pullup). - * PI11 - PIN11                     (input pullup). - * PI12 - PIN12                     (input pullup). - * PI13 - PIN13                     (input pullup). - * PI14 - PIN14                     (input pullup). - * PI15 - PIN15                     (input pullup). - */ -#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | PIN_MODE_INPUT(GPIOI_PIN1) | PIN_MODE_INPUT(GPIOI_PIN2) | PIN_MODE_INPUT(GPIOI_PIN3) | PIN_MODE_INPUT(GPIOI_PIN4) | PIN_MODE_INPUT(GPIOI_PIN5) | PIN_MODE_INPUT(GPIOI_PIN6) | PIN_MODE_INPUT(GPIOI_PIN7) | PIN_MODE_INPUT(GPIOI_PIN8) | PIN_MODE_INPUT(GPIOI_PIN9) | PIN_MODE_INPUT(GPIOI_PIN10) | PIN_MODE_INPUT(GPIOI_PIN11) | PIN_MODE_INPUT(GPIOI_PIN12) | PIN_MODE_INPUT(GPIOI_PIN13) | PIN_MODE_INPUT(GPIOI_PIN14) | PIN_MODE_INPUT(GPIOI_PIN15)) -#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | PIN_OTYPE_PUSHPULL(GPIOI_PIN15)) -#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | PIN_OSPEED_HIGH(GPIOI_PIN1) | PIN_OSPEED_HIGH(GPIOI_PIN2) | PIN_OSPEED_HIGH(GPIOI_PIN3) | PIN_OSPEED_HIGH(GPIOI_PIN4) | PIN_OSPEED_HIGH(GPIOI_PIN5) | PIN_OSPEED_HIGH(GPIOI_PIN6) | PIN_OSPEED_HIGH(GPIOI_PIN7) | PIN_OSPEED_HIGH(GPIOI_PIN8) | PIN_OSPEED_HIGH(GPIOI_PIN9) | PIN_OSPEED_HIGH(GPIOI_PIN10) | PIN_OSPEED_HIGH(GPIOI_PIN11) | PIN_OSPEED_HIGH(GPIOI_PIN12) | PIN_OSPEED_HIGH(GPIOI_PIN13) | PIN_OSPEED_HIGH(GPIOI_PIN14) | PIN_OSPEED_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | PIN_PUPDR_PULLUP(GPIOI_PIN1) | PIN_PUPDR_PULLUP(GPIOI_PIN2) | PIN_PUPDR_PULLUP(GPIOI_PIN3) | PIN_PUPDR_PULLUP(GPIOI_PIN4) | PIN_PUPDR_PULLUP(GPIOI_PIN5) | PIN_PUPDR_PULLUP(GPIOI_PIN6) | PIN_PUPDR_PULLUP(GPIOI_PIN7) | PIN_PUPDR_PULLUP(GPIOI_PIN8) | PIN_PUPDR_PULLUP(GPIOI_PIN9) | PIN_PUPDR_PULLUP(GPIOI_PIN10) | PIN_PUPDR_PULLUP(GPIOI_PIN11) | PIN_PUPDR_PULLUP(GPIOI_PIN12) | PIN_PUPDR_PULLUP(GPIOI_PIN13) | PIN_PUPDR_PULLUP(GPIOI_PIN14) | PIN_PUPDR_PULLUP(GPIOI_PIN15)) -#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | PIN_ODR_HIGH(GPIOI_PIN1) | PIN_ODR_HIGH(GPIOI_PIN2) | PIN_ODR_HIGH(GPIOI_PIN3) | PIN_ODR_HIGH(GPIOI_PIN4) | PIN_ODR_HIGH(GPIOI_PIN5) | PIN_ODR_HIGH(GPIOI_PIN6) | PIN_ODR_HIGH(GPIOI_PIN7) | PIN_ODR_HIGH(GPIOI_PIN8) | PIN_ODR_HIGH(GPIOI_PIN9) | PIN_ODR_HIGH(GPIOI_PIN10) | PIN_ODR_HIGH(GPIOI_PIN11) | PIN_ODR_HIGH(GPIOI_PIN12) | PIN_ODR_HIGH(GPIOI_PIN13) | PIN_ODR_HIGH(GPIOI_PIN14) | PIN_ODR_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | PIN_AFIO_AF(GPIOI_PIN1, 0U) | PIN_AFIO_AF(GPIOI_PIN2, 0U) | PIN_AFIO_AF(GPIOI_PIN3, 0U) | PIN_AFIO_AF(GPIOI_PIN4, 0U) | PIN_AFIO_AF(GPIOI_PIN5, 0U) | PIN_AFIO_AF(GPIOI_PIN6, 0U) | PIN_AFIO_AF(GPIOI_PIN7, 0U)) -#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | PIN_AFIO_AF(GPIOI_PIN9, 0U) | PIN_AFIO_AF(GPIOI_PIN10, 0U) | PIN_AFIO_AF(GPIOI_PIN11, 0U) | PIN_AFIO_AF(GPIOI_PIN12, 0U) | PIN_AFIO_AF(GPIOI_PIN13, 0U) | PIN_AFIO_AF(GPIOI_PIN14, 0U) | PIN_AFIO_AF(GPIOI_PIN15, 0U)) - -/*===========================================================================*/ -/* External declarations.                                                    */ -/*===========================================================================*/ - -#if !defined(_FROM_ASM_) -#    ifdef __cplusplus -extern "C" { -#    endif -void boardInit(void); -#    ifdef __cplusplus -} -#    endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg b/drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg deleted file mode 100644 index 7559ceb938..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg +++ /dev/null @@ -1,1193 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32F4xx board Template --> -<board -  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" -  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f4xx_board.xsd"> -  <configuration_settings> -    <templates_path>resources/gencfg/processors/boards/stm32f4xx/templates</templates_path> -    <output_path>..</output_path> -    <hal_version>5.0.x</hal_version> -  </configuration_settings> -  <board_name>STMicroelectronics STM32F401C-Discovery</board_name> -  <board_id>ST_STM32F401C_DISCOVERY</board_id> -  <board_functions></board_functions> -  <subtype>STM32F401xC</subtype> -  <clocks -    HSEFrequency="8000000" -    HSEBypass="false" -    LSEFrequency="0" -    LSEBypass="false" -    VDD="300" /> -  <ports> -    <GPIOA> -      <pin0 -        ID="BUTTON" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="CS43L22_LRCK" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="6" /> -      <pin5 -        ID="L3GD20_SCL" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="5" /> -      <pin6 -        ID="L3GD20_SD0" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Alternate" -        Alternate="5" /> -      <pin7 -        ID="L3GD20_SDI" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Alternate" -        Alternate="5" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="VBUS_FS" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="OTG_FS_ID" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="10" /> -      <pin11 -        ID="OTG_FS_DM" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="10" /> -      <pin12 -        ID="OTG_FS_DP" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="10" /> -      <pin13 -        ID="SWDIO" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="0" /> -      <pin14 -        ID="SWCLK" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOA> -    <GPIOB> -      <pin0 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="SWO" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Alternate" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="LSM303DLHC_SCL" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="4" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="LSM303DLHC_SDA" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="4" /> -      <pin10 -        ID="MP45DT02_CLK_IN" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="5" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOB> -    <GPIOC> -      <pin0 -        ID="OTG_FS_POWER_ON" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Output" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="CS43L22_AIN4x MP45DT02_PDM_OUT" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="5" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="CS43L22_MCLK" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Alternate" -        Alternate="6" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="CS43L22_SCLK" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Alternate" -        Alternate="6" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="CS43L22_SDIN" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Alternate" -        Alternate="6" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="OSC32_IN" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="OSC32_OUT" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -    </GPIOC> -    <GPIOD> -      <pin0 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="CS43L22_RESET" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Output" -        Alternate="0" /> -      <pin5 -        ID="OverCurrent" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="LED4" -        Type="PushPull" -        Level="Low" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Output" -        Alternate="0" /> -      <pin13 -        ID="LED3" -        Type="PushPull" -        Level="Low" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Output" -        Alternate="0" /> -      <pin14 -        ID="LED5" -        Type="PushPull" -        Level="Low" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Output" -        Alternate="0" /> -      <pin15 -        ID="LED6" -        Type="PushPull" -        Level="Low" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Output" -        Alternate="0" /> -    </GPIOD> -    <GPIOE> -      <pin0 -        ID="L3GD20_INT1" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="L3GD20_INT2" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="LSM303DLHC_DRDY" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="L3GD20_CS" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Output" -        Alternate="0" /> -      <pin4 -        ID="LSM303DLHC_INT1" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Output" -        Alternate="0" /> -      <pin5 -        ID="LSM303DLHC_INT2" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Output" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOE> -    <GPIOF> -      <pin0 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOF> -    <GPIOG> -      <pin0 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOG> -    <GPIOH> -      <pin0 -        ID="OSC_IN" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="OSC_OUT" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOH> -    <GPIOI> -      <pin0 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOI> -  </ports> -</board> diff --git a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp b/drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp deleted file mode 100644 index 41754c1414..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp +++ /dev/null @@ -1,15 +0,0 @@ -sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f4xx/templates -outputRoot: .. -dataRoot: . - -freemarkerLinks: { -    lib: ../../../../../tools/ftl/libs -} - -data : { -  doc1:xml ( -    board.chcfg -    { -    } -  ) -} diff --git a/drivers/boards/BLACKPILL_STM32_F411/board.c b/drivers/boards/BLACKPILL_STM32_F411/board.c deleted file mode 100644 index 330e06c8aa..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/board.c +++ /dev/null @@ -1,250 +0,0 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" -#include "stm32_gpio.h" - -/*===========================================================================*/ -/* Driver local definitions.                                                 */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables.                                                */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types.                                         */ -/*===========================================================================*/ - -/** - * @brief   Type of STM32 GPIO port setup. - */ -typedef struct { -    uint32_t moder; -    uint32_t otyper; -    uint32_t ospeedr; -    uint32_t pupdr; -    uint32_t odr; -    uint32_t afrl; -    uint32_t afrh; -} gpio_setup_t; - -/** - * @brief   Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) -    gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) -    gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) -    gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) -    gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) -    gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) -    gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) -    gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) -    gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) -    gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) -    gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) -    gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief   STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA -    {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB -    {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC -    {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD -    {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE -    {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF -    {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG -    {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH -    {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI -    {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ -    {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK -    {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions.                                                   */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { -    gpiop->OTYPER  = config->otyper; -    gpiop->OSPEEDR = config->ospeedr; -    gpiop->PUPDR   = config->pupdr; -    gpiop->ODR     = config->odr; -    gpiop->AFRL    = config->afrl; -    gpiop->AFRH    = config->afrh; -    gpiop->MODER   = config->moder; -} - -static void stm32_gpio_init(void) { -    /* Enabling GPIO-related clocks, the mask comes from the -       registry header file.*/ -    rccResetAHB1(STM32_GPIO_EN_MASK); -    rccEnableAHB1(STM32_GPIO_EN_MASK, true); - -    /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA -    gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB -    gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC -    gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD -    gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE -    gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF -    gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG -    gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH -    gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI -    gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ -    gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK -    gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers.                                                */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions.                                                */ -/*===========================================================================*/ - -__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} - -/** - * @brief   Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - *          else. - */ -void __early_init(void) { -    enter_bootloader_mode_if_requested(); - -    stm32_gpio_init(); -    stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief   SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { -    (void)sdcp; -    /* TODO: Fill the implementation.*/ -    return true; -} - -/** - * @brief   SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { -    (void)sdcp; -    /* TODO: Fill the implementation.*/ -    return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief   MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { -    (void)mmcp; -    /* TODO: Fill the implementation.*/ -    return true; -} - -/** - * @brief   MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { -    (void)mmcp; -    /* TODO: Fill the implementation.*/ -    return false; -} -#endif - -/** - * @brief   Board-specific initialization code. - * @todo    Add your board-specific code, if any. - */ -void boardInit(void) {} diff --git a/drivers/boards/BLACKPILL_STM32_F411/board.h b/drivers/boards/BLACKPILL_STM32_F411/board.h deleted file mode 100644 index c0613b4a71..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/board.h +++ /dev/null @@ -1,583 +0,0 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/*===========================================================================*/ -/* Driver constants.                                                         */ -/*===========================================================================*/ - -/* - * Setup for STM32F411CEU6 black pill board. - */ - -/* - * Board identifier. - */ -#define BOARD_BLACKPILL_STM32_F411 -#define BOARD_NAME "STM32F411CEU6 blackpill" - -/* - * Allow Board to boot USB without extra A9 hardware/software config - */ -#define BOARD_OTG_NOVBUSSENS 1 - -/* - * Board oscillators-related settings. - */ -#if !defined(STM32_LSECLK) -#    define STM32_LSECLK 32768U -#endif - -#if !defined(STM32_HSECLK) -#    define STM32_HSECLK 25000000U -#endif - -//#define STM32_HSE_BYPASS - -/* - * Board voltages. - * Required for performance limits calculation. - */ -#define STM32_VDD 300U - -/* - * MCU type as defined in the ST header. - */ -#define STM32F411xE - -/* - * IO pins assignments. - */ -#define GPIOA_ARD_A0 0U -#define GPIOA_ADC1_IN0 0U -#define GPIOA_ARD_A1 1U -#define GPIOA_ADC1_IN1 1U -#define GPIOA_ARD_D1 2U -#define GPIOA_USART2_TX 2U -#define GPIOA_ARD_D0 3U -#define GPIOA_USART2_RX 3U -#define GPIOA_ARD_A2 4U -#define GPIOA_ADC1_IN4 4U -#define GPIOA_LED_GREEN 5U -#define GPIOA_ARD_D13 5U -#define GPIOA_ARD_D12 6U -#define GPIOA_ARD_D11 7U -#define GPIOA_ARD_D7 8U -#define GPIOA_ARD_D8 9U -#define GPIOA_ARD_D2 10U -#define GPIOA_OTG_FS_DM 11U -#define GPIOA_OTG_FS_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_ARD_A3 0U -#define GPIOB_ADC1_IN8 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_SWO 3U -#define GPIOB_ARD_D3 3U -#define GPIOB_ARD_D5 4U -#define GPIOB_ARD_D4 5U -#define GPIOB_ARD_D10 6U -#define GPIOB_PIN7 7U -#define GPIOB_ARD_D15 8U -#define GPIOB_ARD_D14 9U -#define GPIOB_ARD_D6 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_PIN13 13U -#define GPIOB_PIN14 14U -#define GPIOB_PIN15 15U - -#define GPIOC_ARD_A5 0U -#define GPIOC_ADC1_IN10 0U -#define GPIOC_ARD_A4 1U -#define GPIOC_ADC1_IN11 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_PIN6 6U -#define GPIOC_ARD_D9 7U -#define GPIOC_PIN8 8U -#define GPIOC_PIN9 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_BUTTON 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_PIN0 0U -#define GPIOF_PIN1 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -#define GPIOG_PIN0 0U -#define GPIOG_PIN1 1U -#define GPIOG_PIN2 2U -#define GPIOG_PIN3 3U -#define GPIOG_PIN4 4U -#define GPIOG_PIN5 5U -#define GPIOG_PIN6 6U -#define GPIOG_PIN7 7U -#define GPIOG_PIN8 8U -#define GPIOG_PIN9 9U -#define GPIOG_PIN10 10U -#define GPIOG_PIN11 11U -#define GPIOG_PIN12 12U -#define GPIOG_PIN13 13U -#define GPIOG_PIN14 14U -#define GPIOG_PIN15 15U - -#define GPIOH_OSC_IN 0U -#define GPIOH_OSC_OUT 1U -#define GPIOH_PIN2 2U -#define GPIOH_PIN3 3U -#define GPIOH_PIN4 4U -#define GPIOH_PIN5 5U -#define GPIOH_PIN6 6U -#define GPIOH_PIN7 7U -#define GPIOH_PIN8 8U -#define GPIOH_PIN9 9U -#define GPIOH_PIN10 10U -#define GPIOH_PIN11 11U -#define GPIOH_PIN12 12U -#define GPIOH_PIN13 13U -#define GPIOH_PIN14 14U -#define GPIOH_PIN15 15U - -#define GPIOI_PIN0 0U -#define GPIOI_PIN1 1U -#define GPIOI_PIN2 2U -#define GPIOI_PIN3 3U -#define GPIOI_PIN4 4U -#define GPIOI_PIN5 5U -#define GPIOI_PIN6 6U -#define GPIOI_PIN7 7U -#define GPIOI_PIN8 8U -#define GPIOI_PIN9 9U -#define GPIOI_PIN10 10U -#define GPIOI_PIN11 11U -#define GPIOI_PIN12 12U -#define GPIOI_PIN13 13U -#define GPIOI_PIN14 14U -#define GPIOI_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_ARD_A0 PAL_LINE(GPIOA, 0U) -#define LINE_ADC1_IN0 PAL_LINE(GPIOA, 0U) -#define LINE_ARD_A1 PAL_LINE(GPIOA, 1U) -#define LINE_ADC1_IN1 PAL_LINE(GPIOA, 1U) -#define LINE_ARD_D1 PAL_LINE(GPIOA, 2U) -#define LINE_USART2_TX PAL_LINE(GPIOA, 2U) -#define LINE_ARD_D0 PAL_LINE(GPIOA, 3U) -#define LINE_USART2_RX PAL_LINE(GPIOA, 3U) -#define LINE_ARD_A2 PAL_LINE(GPIOA, 4U) -#define LINE_ADC1_IN4 PAL_LINE(GPIOA, 4U) -#define LINE_LED_GREEN PAL_LINE(GPIOA, 5U) -#define LINE_ARD_D13 PAL_LINE(GPIOA, 5U) -#define LINE_ARD_D12 PAL_LINE(GPIOA, 6U) -#define LINE_ARD_D11 PAL_LINE(GPIOA, 7U) -#define LINE_ARD_D7 PAL_LINE(GPIOA, 8U) -#define LINE_ARD_D8 PAL_LINE(GPIOA, 9U) -#define LINE_ARD_D2 PAL_LINE(GPIOA, 10U) -#define LINE_OTG_FS_DM PAL_LINE(GPIOA, 11U) -#define LINE_OTG_FS_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) -#define LINE_ARD_A3 PAL_LINE(GPIOB, 0U) -#define LINE_ADC1_IN8 PAL_LINE(GPIOB, 0U) -#define LINE_SWO PAL_LINE(GPIOB, 3U) -#define LINE_ARD_D3 PAL_LINE(GPIOB, 3U) -#define LINE_ARD_D5 PAL_LINE(GPIOB, 4U) -#define LINE_ARD_D4 PAL_LINE(GPIOB, 5U) -#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U) -#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U) -#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U) -#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U) -#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U) -#define LINE_ADC1_IN10 PAL_LINE(GPIOC, 0U) -#define LINE_ARD_A4 PAL_LINE(GPIOC, 1U) -#define LINE_ADC1_IN11 PAL_LINE(GPIOC, 1U) -#define LINE_ARD_D9 PAL_LINE(GPIOC, 7U) -#define LINE_BUTTON PAL_LINE(GPIOC, 13U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) -#define LINE_OSC_IN PAL_LINE(GPIOH, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOH, 1U) - -/*===========================================================================*/ -/* Driver pre-compile time settings.                                         */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks.                                       */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types.                                         */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros.                                                            */ -/*===========================================================================*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n)*2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n)*2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n)*2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0  - ARD_A0 ADC1_IN0           (input pullup). - * PA1  - ARD_A1 ADC1_IN1           (input pullup). - * PA2  - ARD_D1 USART2_TX          (alternate 7). - * PA3  - ARD_D0 USART2_RX          (alternate 7). - * PA4  - ARD_A2 ADC1_IN4           (input pullup). - * PA5  - LED_GREEN ARD_D13         (output pushpull high). - * PA6  - ARD_D12                   (input pullup). - * PA7  - ARD_D11                   (input pullup). - * PA8  - ARD_D7                    (input pullup). - * PA9  - ARD_D8                    (input pullup). - * PA10 - ARD_D2                    (input pullup). - * PA11 - OTG_FS_DM                 (alternate 10). - * PA12 - OTG_FS_DP                 (alternate 10). - * PA13 - SWDIO                     (alternate 0). - * PA14 - SWCLK                     (alternate 0). - * PA15 - PIN15                     (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | PIN_MODE_INPUT(GPIOA_ARD_A1) | PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | PIN_MODE_INPUT(GPIOA_ARD_A2) | PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | PIN_MODE_INPUT(GPIOA_ARD_D12) | PIN_MODE_INPUT(GPIOA_ARD_D11) | PIN_MODE_INPUT(GPIOA_ARD_D7) | PIN_MODE_INPUT(GPIOA_ARD_D8) | PIN_MODE_INPUT(GPIOA_ARD_D2) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_ARD_A0) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_A1) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D1) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D0) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_A2) | PIN_OTYPE_PUSHPULL(GPIOA_LED_GREEN) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D12) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D11) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D7) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D8) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D2) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_HIGH(GPIOA_ARD_A0) | PIN_OSPEED_HIGH(GPIOA_ARD_A1) | PIN_OSPEED_MEDIUM(GPIOA_ARD_D1) | PIN_OSPEED_MEDIUM(GPIOA_ARD_D0) | PIN_OSPEED_HIGH(GPIOA_ARD_A2) | PIN_OSPEED_MEDIUM(GPIOA_LED_GREEN) | PIN_OSPEED_HIGH(GPIOA_ARD_D12) | PIN_OSPEED_HIGH(GPIOA_ARD_D11) | PIN_OSPEED_HIGH(GPIOA_ARD_D7) | PIN_OSPEED_HIGH(GPIOA_ARD_D8) | PIN_OSPEED_HIGH(GPIOA_ARD_D2) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | PIN_PUPDR_PULLUP(GPIOA_ARD_D7) | PIN_PUPDR_PULLUP(GPIOA_ARD_D8) | PIN_PUPDR_PULLUP(GPIOA_ARD_D2) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | PIN_PUPDR_PULLUP(GPIOA_SWDIO) | PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_ARD_A0) | PIN_ODR_HIGH(GPIOA_ARD_A1) | PIN_ODR_HIGH(GPIOA_ARD_D1) | PIN_ODR_HIGH(GPIOA_ARD_D0) | PIN_ODR_HIGH(GPIOA_ARD_A2) | PIN_ODR_LOW(GPIOA_LED_GREEN) | PIN_ODR_HIGH(GPIOA_ARD_D12) | PIN_ODR_HIGH(GPIOA_ARD_D11) | PIN_ODR_HIGH(GPIOA_ARD_D7) | PIN_ODR_HIGH(GPIOA_ARD_D8) | PIN_ODR_HIGH(GPIOA_ARD_D2) | PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_ARD_A0, 0U) | PIN_AFIO_AF(GPIOA_ARD_A1, 0U) | PIN_AFIO_AF(GPIOA_ARD_D1, 7U) | PIN_AFIO_AF(GPIOA_ARD_D0, 7U) | PIN_AFIO_AF(GPIOA_ARD_A2, 0U) | PIN_AFIO_AF(GPIOA_LED_GREEN, 0U) | PIN_AFIO_AF(GPIOA_ARD_D12, 0U) | PIN_AFIO_AF(GPIOA_ARD_D11, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_ARD_D7, 0U) | PIN_AFIO_AF(GPIOA_ARD_D8, 0U) | PIN_AFIO_AF(GPIOA_ARD_D2, 0U) | PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0  - ARD_A3 ADC1_IN8           (input pullup). - * PB1  - PIN1                      (input pullup). - * PB2  - PIN2                      (input pullup). - * PB3  - SWO ARD_D3                (alternate 0). - * PB4  - ARD_D5                    (input pullup). - * PB5  - ARD_D4                    (input pullup). - * PB6  - ARD_D10                   (input pullup). - * PB7  - PIN7                      (input pullup). - * PB8  - ARD_D15                   (input pullup). - * PB9  - ARD_D14                   (input pullup). - * PB10 - ARD_D6                    (input pullup). - * PB11 - PIN11                     (input pullup). - * PB12 - PIN12                     (input pullup). - * PB13 - PIN13                     (input pullup). - * PB14 - PIN14                     (input pullup). - * PB15 - PIN15                     (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_ALTERNATE(GPIOB_SWO) | PIN_MODE_INPUT(GPIOB_ARD_D5) | PIN_MODE_INPUT(GPIOB_ARD_D4) | PIN_MODE_INPUT(GPIOB_ARD_D10) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_ARD_D15) | PIN_MODE_INPUT(GPIOB_ARD_D14) | PIN_MODE_INPUT(GPIOB_ARD_D6) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_INPUT(GPIOB_PIN13) | PIN_MODE_INPUT(GPIOB_PIN14) | PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_ARD_A3) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_SWO) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D5) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D4) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D10) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D15) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D14) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D6) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_HIGH(GPIOB_ARD_A3) | PIN_OSPEED_HIGH(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_SWO) | PIN_OSPEED_HIGH(GPIOB_ARD_D5) | PIN_OSPEED_HIGH(GPIOB_ARD_D4) | PIN_OSPEED_HIGH(GPIOB_ARD_D10) | PIN_OSPEED_HIGH(GPIOB_PIN7) | PIN_OSPEED_HIGH(GPIOB_ARD_D15) | PIN_OSPEED_HIGH(GPIOB_ARD_D14) | PIN_OSPEED_HIGH(GPIOB_ARD_D6) | PIN_OSPEED_HIGH(GPIOB_PIN11) | PIN_OSPEED_HIGH(GPIOB_PIN12) | PIN_OSPEED_HIGH(GPIOB_PIN13) | PIN_OSPEED_HIGH(GPIOB_PIN14) | PIN_OSPEED_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_SWO) | PIN_PUPDR_PULLUP(GPIOB_ARD_D5) | PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_PULLUP(GPIOB_PIN13) | PIN_PUPDR_PULLUP(GPIOB_PIN14) | PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_ARD_A3) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_SWO) | PIN_ODR_HIGH(GPIOB_ARD_D5) | PIN_ODR_HIGH(GPIOB_ARD_D4) | PIN_ODR_HIGH(GPIOB_ARD_D10) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_ARD_D15) | PIN_ODR_HIGH(GPIOB_ARD_D14) | PIN_ODR_HIGH(GPIOB_ARD_D6) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_PIN13) | PIN_ODR_HIGH(GPIOB_PIN14) | PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_ARD_A3, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_SWO, 0U) | PIN_AFIO_AF(GPIOB_ARD_D5, 0U) | PIN_AFIO_AF(GPIOB_ARD_D4, 0U) | PIN_AFIO_AF(GPIOB_ARD_D10, 0U) | PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0U) | PIN_AFIO_AF(GPIOB_ARD_D14, 0U) | PIN_AFIO_AF(GPIOB_ARD_D6, 0U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_PIN13, 0U) | PIN_AFIO_AF(GPIOB_PIN14, 0U) | PIN_AFIO_AF(GPIOB_PIN15, 0U)) - -/* - * GPIOC setup: - * - * PC0  - ARD_A5 ADC1_IN10          (input pullup). - * PC1  - ARD_A4 ADC1_IN11          (input pullup). - * PC2  - PIN2                      (input pullup). - * PC3  - PIN3                      (input pullup). - * PC4  - PIN4                      (input pullup). - * PC5  - PIN5                      (input pullup). - * PC6  - PIN6                      (input pullup). - * PC7  - ARD_D9                    (input pullup). - * PC8  - PIN8                      (input pullup). - * PC9  - PIN9                      (input pullup). - * PC10 - PIN10                     (input pullup). - * PC11 - PIN11                     (input pullup). - * PC12 - PIN12                     (input pullup). - * PC13 - BUTTON                    (input floating). - * PC14 - OSC32_IN                  (input floating). - * PC15 - OSC32_OUT                 (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | PIN_MODE_INPUT(GPIOC_ARD_A4) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_INPUT(GPIOC_PIN3) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_INPUT(GPIOC_PIN6) | PIN_MODE_INPUT(GPIOC_ARD_D9) | PIN_MODE_INPUT(GPIOC_PIN8) | PIN_MODE_INPUT(GPIOC_PIN9) | PIN_MODE_INPUT(GPIOC_PIN10) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_INPUT(GPIOC_PIN12) | PIN_MODE_INPUT(GPIOC_BUTTON) | PIN_MODE_INPUT(GPIOC_OSC32_IN) | PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_ARD_A5) | PIN_OTYPE_PUSHPULL(GPIOC_ARD_A4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | PIN_OTYPE_PUSHPULL(GPIOC_ARD_D9) | PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | PIN_OTYPE_PUSHPULL(GPIOC_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_ARD_A5) | PIN_OSPEED_HIGH(GPIOC_ARD_A4) | PIN_OSPEED_HIGH(GPIOC_PIN2) | PIN_OSPEED_HIGH(GPIOC_PIN3) | PIN_OSPEED_HIGH(GPIOC_PIN4) | PIN_OSPEED_HIGH(GPIOC_PIN5) | PIN_OSPEED_HIGH(GPIOC_PIN6) | PIN_OSPEED_HIGH(GPIOC_ARD_D9) | PIN_OSPEED_HIGH(GPIOC_PIN8) | PIN_OSPEED_HIGH(GPIOC_PIN9) | PIN_OSPEED_HIGH(GPIOC_PIN10) | PIN_OSPEED_HIGH(GPIOC_PIN11) | PIN_OSPEED_HIGH(GPIOC_PIN12) | PIN_OSPEED_HIGH(GPIOC_BUTTON) | PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_PULLUP(GPIOC_PIN3) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_PULLUP(GPIOC_PIN6) | PIN_PUPDR_PULLUP(GPIOC_ARD_D9) | PIN_PUPDR_PULLUP(GPIOC_PIN8) | PIN_PUPDR_PULLUP(GPIOC_PIN9) | PIN_PUPDR_PULLUP(GPIOC_PIN10) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_PIN12) | PIN_PUPDR_FLOATING(GPIOC_BUTTON) | PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_ARD_A5) | PIN_ODR_HIGH(GPIOC_ARD_A4) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_PIN3) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_HIGH(GPIOC_PIN6) | PIN_ODR_HIGH(GPIOC_ARD_D9) | PIN_ODR_HIGH(GPIOC_PIN8) | PIN_ODR_HIGH(GPIOC_PIN9) | PIN_ODR_HIGH(GPIOC_PIN10) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_PIN12) | PIN_ODR_HIGH(GPIOC_BUTTON) | PIN_ODR_HIGH(GPIOC_OSC32_IN) | PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_ARD_A5, 0U) | PIN_AFIO_AF(GPIOC_ARD_A4, 0U) | PIN_AFIO_AF(GPIOC_PIN2, 0U) | PIN_AFIO_AF(GPIOC_PIN3, 0U) | PIN_AFIO_AF(GPIOC_PIN4, 0U) | PIN_AFIO_AF(GPIOC_PIN5, 0U) | PIN_AFIO_AF(GPIOC_PIN6, 0U) | PIN_AFIO_AF(GPIOC_ARD_D9, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | PIN_AFIO_AF(GPIOC_PIN9, 0U) | PIN_AFIO_AF(GPIOC_PIN10, 0U) | PIN_AFIO_AF(GPIOC_PIN11, 0U) | PIN_AFIO_AF(GPIOC_PIN12, 0U) | PIN_AFIO_AF(GPIOC_BUTTON, 0U) | PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0  - PIN0                      (input pullup). - * PD1  - PIN1                      (input pullup). - * PD2  - PIN2                      (input pullup). - * PD3  - PIN3                      (input pullup). - * PD4  - PIN4                      (input pullup). - * PD5  - PIN5                      (input pullup). - * PD6  - PIN6                      (input pullup). - * PD7  - PIN7                      (input pullup). - * PD8  - PIN8                      (input pullup). - * PD9  - PIN9                      (input pullup). - * PD10 - PIN10                     (input pullup). - * PD11 - PIN11                     (input pullup). - * PD12 - PIN12                     (input pullup). - * PD13 - PIN13                     (input pullup). - * PD14 - PIN14                     (input pullup). - * PD15 - PIN15                     (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_INPUT(GPIOD_PIN4) | PIN_MODE_INPUT(GPIOD_PIN5) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_INPUT(GPIOD_PIN12) | PIN_MODE_INPUT(GPIOD_PIN13) | PIN_MODE_INPUT(GPIOD_PIN14) | PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | PIN_OSPEED_HIGH(GPIOD_PIN1) | PIN_OSPEED_HIGH(GPIOD_PIN2) | PIN_OSPEED_HIGH(GPIOD_PIN3) | PIN_OSPEED_HIGH(GPIOD_PIN4) | PIN_OSPEED_HIGH(GPIOD_PIN5) | PIN_OSPEED_HIGH(GPIOD_PIN6) | PIN_OSPEED_HIGH(GPIOD_PIN7) | PIN_OSPEED_HIGH(GPIOD_PIN8) | PIN_OSPEED_HIGH(GPIOD_PIN9) | PIN_OSPEED_HIGH(GPIOD_PIN10) | PIN_OSPEED_HIGH(GPIOD_PIN11) | PIN_OSPEED_HIGH(GPIOD_PIN12) | PIN_OSPEED_HIGH(GPIOD_PIN13) | PIN_OSPEED_HIGH(GPIOD_PIN14) | PIN_OSPEED_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_PIN4) | PIN_PUPDR_PULLUP(GPIOD_PIN5) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_PULLUP(GPIOD_PIN12) | PIN_PUPDR_PULLUP(GPIOD_PIN13) | PIN_PUPDR_PULLUP(GPIOD_PIN14) | PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_PIN4) | PIN_ODR_HIGH(GPIOD_PIN5) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_HIGH(GPIOD_PIN12) | PIN_ODR_HIGH(GPIOD_PIN13) | PIN_ODR_HIGH(GPIOD_PIN14) | PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | PIN_AFIO_AF(GPIOD_PIN1, 0U) | PIN_AFIO_AF(GPIOD_PIN2, 0U) | PIN_AFIO_AF(GPIOD_PIN3, 0U) | PIN_AFIO_AF(GPIOD_PIN4, 0U) | PIN_AFIO_AF(GPIOD_PIN5, 0U) | PIN_AFIO_AF(GPIOD_PIN6, 0U) | PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | PIN_AFIO_AF(GPIOD_PIN9, 0U) | PIN_AFIO_AF(GPIOD_PIN10, 0U) | PIN_AFIO_AF(GPIOD_PIN11, 0U) | PIN_AFIO_AF(GPIOD_PIN12, 0U) | PIN_AFIO_AF(GPIOD_PIN13, 0U) | PIN_AFIO_AF(GPIOD_PIN14, 0U) | PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0  - PIN0                      (input pullup). - * PE1  - PIN1                      (input pullup). - * PE2  - PIN2                      (input pullup). - * PE3  - PIN3                      (input pullup). - * PE4  - PIN4                      (input pullup). - * PE5  - PIN5                      (input pullup). - * PE6  - PIN6                      (input pullup). - * PE7  - PIN7                      (input pullup). - * PE8  - PIN8                      (input pullup). - * PE9  - PIN9                      (input pullup). - * PE10 - PIN10                     (input pullup). - * PE11 - PIN11                     (input pullup). - * PE12 - PIN12                     (input pullup). - * PE13 - PIN13                     (input pullup). - * PE14 - PIN14                     (input pullup). - * PE15 - PIN15                     (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | PIN_MODE_INPUT(GPIOE_PIN1) | PIN_MODE_INPUT(GPIOE_PIN2) | PIN_MODE_INPUT(GPIOE_PIN3) | PIN_MODE_INPUT(GPIOE_PIN4) | PIN_MODE_INPUT(GPIOE_PIN5) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_INPUT(GPIOE_PIN8) | PIN_MODE_INPUT(GPIOE_PIN9) | PIN_MODE_INPUT(GPIOE_PIN10) | PIN_MODE_INPUT(GPIOE_PIN11) | PIN_MODE_INPUT(GPIOE_PIN12) | PIN_MODE_INPUT(GPIOE_PIN13) | PIN_MODE_INPUT(GPIOE_PIN14) | PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_PIN0) | PIN_OSPEED_HIGH(GPIOE_PIN1) | PIN_OSPEED_HIGH(GPIOE_PIN2) | PIN_OSPEED_HIGH(GPIOE_PIN3) | PIN_OSPEED_HIGH(GPIOE_PIN4) | PIN_OSPEED_HIGH(GPIOE_PIN5) | PIN_OSPEED_HIGH(GPIOE_PIN6) | PIN_OSPEED_HIGH(GPIOE_PIN7) | PIN_OSPEED_HIGH(GPIOE_PIN8) | PIN_OSPEED_HIGH(GPIOE_PIN9) | PIN_OSPEED_HIGH(GPIOE_PIN10) | PIN_OSPEED_HIGH(GPIOE_PIN11) | PIN_OSPEED_HIGH(GPIOE_PIN12) | PIN_OSPEED_HIGH(GPIOE_PIN13) | PIN_OSPEED_HIGH(GPIOE_PIN14) | PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | PIN_PUPDR_PULLUP(GPIOE_PIN1) | PIN_PUPDR_PULLUP(GPIOE_PIN2) | PIN_PUPDR_PULLUP(GPIOE_PIN3) | PIN_PUPDR_PULLUP(GPIOE_PIN4) | PIN_PUPDR_PULLUP(GPIOE_PIN5) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_PULLUP(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_PULLUP(GPIOE_PIN13) | PIN_PUPDR_PULLUP(GPIOE_PIN14) | PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | PIN_ODR_HIGH(GPIOE_PIN1) | PIN_ODR_HIGH(GPIOE_PIN2) | PIN_ODR_HIGH(GPIOE_PIN3) | PIN_ODR_HIGH(GPIOE_PIN4) | PIN_ODR_HIGH(GPIOE_PIN5) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_HIGH(GPIOE_PIN8) | PIN_ODR_HIGH(GPIOE_PIN9) | PIN_ODR_HIGH(GPIOE_PIN10) | PIN_ODR_HIGH(GPIOE_PIN11) | PIN_ODR_HIGH(GPIOE_PIN12) | PIN_ODR_HIGH(GPIOE_PIN13) | PIN_ODR_HIGH(GPIOE_PIN14) | PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | PIN_AFIO_AF(GPIOE_PIN1, 0U) | PIN_AFIO_AF(GPIOE_PIN2, 0U) | PIN_AFIO_AF(GPIOE_PIN3, 0U) | PIN_AFIO_AF(GPIOE_PIN4, 0U) | PIN_AFIO_AF(GPIOE_PIN5, 0U) | PIN_AFIO_AF(GPIOE_PIN6, 0U) | PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | PIN_AFIO_AF(GPIOE_PIN9, 0U) | PIN_AFIO_AF(GPIOE_PIN10, 0U) | PIN_AFIO_AF(GPIOE_PIN11, 0U) | PIN_AFIO_AF(GPIOE_PIN12, 0U) | PIN_AFIO_AF(GPIOE_PIN13, 0U) | PIN_AFIO_AF(GPIOE_PIN14, 0U) | PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0  - PIN0                      (input pullup). - * PF1  - PIN1                      (input pullup). - * PF2  - PIN2                      (input pullup). - * PF3  - PIN3                      (input pullup). - * PF4  - PIN4                      (input pullup). - * PF5  - PIN5                      (input pullup). - * PF6  - PIN6                      (input pullup). - * PF7  - PIN7                      (input pullup). - * PF8  - PIN8                      (input pullup). - * PF9  - PIN9                      (input pullup). - * PF10 - PIN10                     (input pullup). - * PF11 - PIN11                     (input pullup). - * PF12 - PIN12                     (input pullup). - * PF13 - PIN13                     (input pullup). - * PF14 - PIN14                     (input pullup). - * PF15 - PIN15                     (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | PIN_MODE_INPUT(GPIOF_PIN1) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | PIN_OSPEED_HIGH(GPIOF_PIN1) | PIN_OSPEED_HIGH(GPIOF_PIN2) | PIN_OSPEED_HIGH(GPIOF_PIN3) | PIN_OSPEED_HIGH(GPIOF_PIN4) | PIN_OSPEED_HIGH(GPIOF_PIN5) | PIN_OSPEED_HIGH(GPIOF_PIN6) | PIN_OSPEED_HIGH(GPIOF_PIN7) | PIN_OSPEED_HIGH(GPIOF_PIN8) | PIN_OSPEED_HIGH(GPIOF_PIN9) | PIN_OSPEED_HIGH(GPIOF_PIN10) | PIN_OSPEED_HIGH(GPIOF_PIN11) | PIN_OSPEED_HIGH(GPIOF_PIN12) | PIN_OSPEED_HIGH(GPIOF_PIN13) | PIN_OSPEED_HIGH(GPIOF_PIN14) | PIN_OSPEED_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | PIN_PUPDR_PULLUP(GPIOF_PIN1) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | PIN_ODR_HIGH(GPIOF_PIN1) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | PIN_AFIO_AF(GPIOF_PIN1, 0U) | PIN_AFIO_AF(GPIOF_PIN2, 0U) | PIN_AFIO_AF(GPIOF_PIN3, 0U) | PIN_AFIO_AF(GPIOF_PIN4, 0U) | PIN_AFIO_AF(GPIOF_PIN5, 0U) | PIN_AFIO_AF(GPIOF_PIN6, 0U) | PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | PIN_AFIO_AF(GPIOF_PIN9, 0U) | PIN_AFIO_AF(GPIOF_PIN10, 0U) | PIN_AFIO_AF(GPIOF_PIN11, 0U) | PIN_AFIO_AF(GPIOF_PIN12, 0U) | PIN_AFIO_AF(GPIOF_PIN13, 0U) | PIN_AFIO_AF(GPIOF_PIN14, 0U) | PIN_AFIO_AF(GPIOF_PIN15, 0U)) - -/* - * GPIOG setup: - * - * PG0  - PIN0                      (input pullup). - * PG1  - PIN1                      (input pullup). - * PG2  - PIN2                      (input pullup). - * PG3  - PIN3                      (input pullup). - * PG4  - PIN4                      (input pullup). - * PG5  - PIN5                      (input pullup). - * PG6  - PIN6                      (input pullup). - * PG7  - PIN7                      (input pullup). - * PG8  - PIN8                      (input pullup). - * PG9  - PIN9                      (input pullup). - * PG10 - PIN10                     (input pullup). - * PG11 - PIN11                     (input pullup). - * PG12 - PIN12                     (input pullup). - * PG13 - PIN13                     (input pullup). - * PG14 - PIN14                     (input pullup). - * PG15 - PIN15                     (input pullup). - */ -#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | PIN_MODE_INPUT(GPIOG_PIN1) | PIN_MODE_INPUT(GPIOG_PIN2) | PIN_MODE_INPUT(GPIOG_PIN3) | PIN_MODE_INPUT(GPIOG_PIN4) | PIN_MODE_INPUT(GPIOG_PIN5) | PIN_MODE_INPUT(GPIOG_PIN6) | PIN_MODE_INPUT(GPIOG_PIN7) | PIN_MODE_INPUT(GPIOG_PIN8) | PIN_MODE_INPUT(GPIOG_PIN9) | PIN_MODE_INPUT(GPIOG_PIN10) | PIN_MODE_INPUT(GPIOG_PIN11) | PIN_MODE_INPUT(GPIOG_PIN12) | PIN_MODE_INPUT(GPIOG_PIN13) | PIN_MODE_INPUT(GPIOG_PIN14) | PIN_MODE_INPUT(GPIOG_PIN15)) -#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) -#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | PIN_OSPEED_HIGH(GPIOG_PIN1) | PIN_OSPEED_HIGH(GPIOG_PIN2) | PIN_OSPEED_HIGH(GPIOG_PIN3) | PIN_OSPEED_HIGH(GPIOG_PIN4) | PIN_OSPEED_HIGH(GPIOG_PIN5) | PIN_OSPEED_HIGH(GPIOG_PIN6) | PIN_OSPEED_HIGH(GPIOG_PIN7) | PIN_OSPEED_HIGH(GPIOG_PIN8) | PIN_OSPEED_HIGH(GPIOG_PIN9) | PIN_OSPEED_HIGH(GPIOG_PIN10) | PIN_OSPEED_HIGH(GPIOG_PIN11) | PIN_OSPEED_HIGH(GPIOG_PIN12) | PIN_OSPEED_HIGH(GPIOG_PIN13) | PIN_OSPEED_HIGH(GPIOG_PIN14) | PIN_OSPEED_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | PIN_PUPDR_PULLUP(GPIOG_PIN1) | PIN_PUPDR_PULLUP(GPIOG_PIN2) | PIN_PUPDR_PULLUP(GPIOG_PIN3) | PIN_PUPDR_PULLUP(GPIOG_PIN4) | PIN_PUPDR_PULLUP(GPIOG_PIN5) | PIN_PUPDR_PULLUP(GPIOG_PIN6) | PIN_PUPDR_PULLUP(GPIOG_PIN7) | PIN_PUPDR_PULLUP(GPIOG_PIN8) | PIN_PUPDR_PULLUP(GPIOG_PIN9) | PIN_PUPDR_PULLUP(GPIOG_PIN10) | PIN_PUPDR_PULLUP(GPIOG_PIN11) | PIN_PUPDR_PULLUP(GPIOG_PIN12) | PIN_PUPDR_PULLUP(GPIOG_PIN13) | PIN_PUPDR_PULLUP(GPIOG_PIN14) | PIN_PUPDR_PULLUP(GPIOG_PIN15)) -#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | PIN_ODR_HIGH(GPIOG_PIN1) | PIN_ODR_HIGH(GPIOG_PIN2) | PIN_ODR_HIGH(GPIOG_PIN3) | PIN_ODR_HIGH(GPIOG_PIN4) | PIN_ODR_HIGH(GPIOG_PIN5) | PIN_ODR_HIGH(GPIOG_PIN6) | PIN_ODR_HIGH(GPIOG_PIN7) | PIN_ODR_HIGH(GPIOG_PIN8) | PIN_ODR_HIGH(GPIOG_PIN9) | PIN_ODR_HIGH(GPIOG_PIN10) | PIN_ODR_HIGH(GPIOG_PIN11) | PIN_ODR_HIGH(GPIOG_PIN12) | PIN_ODR_HIGH(GPIOG_PIN13) | PIN_ODR_HIGH(GPIOG_PIN14) | PIN_ODR_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | PIN_AFIO_AF(GPIOG_PIN1, 0U) | PIN_AFIO_AF(GPIOG_PIN2, 0U) | PIN_AFIO_AF(GPIOG_PIN3, 0U) | PIN_AFIO_AF(GPIOG_PIN4, 0U) | PIN_AFIO_AF(GPIOG_PIN5, 0U) | PIN_AFIO_AF(GPIOG_PIN6, 0U) | PIN_AFIO_AF(GPIOG_PIN7, 0U)) -#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | PIN_AFIO_AF(GPIOG_PIN9, 0U) | PIN_AFIO_AF(GPIOG_PIN10, 0U) | PIN_AFIO_AF(GPIOG_PIN11, 0U) | PIN_AFIO_AF(GPIOG_PIN12, 0U) | PIN_AFIO_AF(GPIOG_PIN13, 0U) | PIN_AFIO_AF(GPIOG_PIN14, 0U) | PIN_AFIO_AF(GPIOG_PIN15, 0U)) - -/* - * GPIOH setup: - * - * PH0  - OSC_IN                    (input floating). - * PH1  - OSC_OUT                   (input floating). - * PH2  - PIN2                      (input pullup). - * PH3  - PIN3                      (input pullup). - * PH4  - PIN4                      (input pullup). - * PH5  - PIN5                      (input pullup). - * PH6  - PIN6                      (input pullup). - * PH7  - PIN7                      (input pullup). - * PH8  - PIN8                      (input pullup). - * PH9  - PIN9                      (input pullup). - * PH10 - PIN10                     (input pullup). - * PH11 - PIN11                     (input pullup). - * PH12 - PIN12                     (input pullup). - * PH13 - PIN13                     (input pullup). - * PH14 - PIN14                     (input pullup). - * PH15 - PIN15                     (input pullup). - */ -#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | PIN_MODE_INPUT(GPIOH_OSC_OUT) | PIN_MODE_INPUT(GPIOH_PIN2) | PIN_MODE_INPUT(GPIOH_PIN3) | PIN_MODE_INPUT(GPIOH_PIN4) | PIN_MODE_INPUT(GPIOH_PIN5) | PIN_MODE_INPUT(GPIOH_PIN6) | PIN_MODE_INPUT(GPIOH_PIN7) | PIN_MODE_INPUT(GPIOH_PIN8) | PIN_MODE_INPUT(GPIOH_PIN9) | PIN_MODE_INPUT(GPIOH_PIN10) | PIN_MODE_INPUT(GPIOH_PIN11) | PIN_MODE_INPUT(GPIOH_PIN12) | PIN_MODE_INPUT(GPIOH_PIN13) | PIN_MODE_INPUT(GPIOH_PIN14) | PIN_MODE_INPUT(GPIOH_PIN15)) -#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) -#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | PIN_OSPEED_HIGH(GPIOH_PIN2) | PIN_OSPEED_HIGH(GPIOH_PIN3) | PIN_OSPEED_HIGH(GPIOH_PIN4) | PIN_OSPEED_HIGH(GPIOH_PIN5) | PIN_OSPEED_HIGH(GPIOH_PIN6) | PIN_OSPEED_HIGH(GPIOH_PIN7) | PIN_OSPEED_HIGH(GPIOH_PIN8) | PIN_OSPEED_HIGH(GPIOH_PIN9) | PIN_OSPEED_HIGH(GPIOH_PIN10) | PIN_OSPEED_HIGH(GPIOH_PIN11) | PIN_OSPEED_HIGH(GPIOH_PIN12) | PIN_OSPEED_HIGH(GPIOH_PIN13) | PIN_OSPEED_HIGH(GPIOH_PIN14) | PIN_OSPEED_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | PIN_PUPDR_PULLUP(GPIOH_PIN2) | PIN_PUPDR_PULLUP(GPIOH_PIN3) | PIN_PUPDR_PULLUP(GPIOH_PIN4) | PIN_PUPDR_PULLUP(GPIOH_PIN5) | PIN_PUPDR_PULLUP(GPIOH_PIN6) | PIN_PUPDR_PULLUP(GPIOH_PIN7) | PIN_PUPDR_PULLUP(GPIOH_PIN8) | PIN_PUPDR_PULLUP(GPIOH_PIN9) | PIN_PUPDR_PULLUP(GPIOH_PIN10) | PIN_PUPDR_PULLUP(GPIOH_PIN11) | PIN_PUPDR_PULLUP(GPIOH_PIN12) | PIN_PUPDR_PULLUP(GPIOH_PIN13) | PIN_PUPDR_PULLUP(GPIOH_PIN14) | PIN_PUPDR_PULLUP(GPIOH_PIN15)) -#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | PIN_ODR_HIGH(GPIOH_OSC_OUT) | PIN_ODR_HIGH(GPIOH_PIN2) | PIN_ODR_HIGH(GPIOH_PIN3) | PIN_ODR_HIGH(GPIOH_PIN4) | PIN_ODR_HIGH(GPIOH_PIN5) | PIN_ODR_HIGH(GPIOH_PIN6) | PIN_ODR_HIGH(GPIOH_PIN7) | PIN_ODR_HIGH(GPIOH_PIN8) | PIN_ODR_HIGH(GPIOH_PIN9) | PIN_ODR_HIGH(GPIOH_PIN10) | PIN_ODR_HIGH(GPIOH_PIN11) | PIN_ODR_HIGH(GPIOH_PIN12) | PIN_ODR_HIGH(GPIOH_PIN13) | PIN_ODR_HIGH(GPIOH_PIN14) | PIN_ODR_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | PIN_AFIO_AF(GPIOH_PIN2, 0U) | PIN_AFIO_AF(GPIOH_PIN3, 0U) | PIN_AFIO_AF(GPIOH_PIN4, 0U) | PIN_AFIO_AF(GPIOH_PIN5, 0U) | PIN_AFIO_AF(GPIOH_PIN6, 0U) | PIN_AFIO_AF(GPIOH_PIN7, 0U)) -#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | PIN_AFIO_AF(GPIOH_PIN9, 0U) | PIN_AFIO_AF(GPIOH_PIN10, 0U) | PIN_AFIO_AF(GPIOH_PIN11, 0U) | PIN_AFIO_AF(GPIOH_PIN12, 0U) | PIN_AFIO_AF(GPIOH_PIN13, 0U) | PIN_AFIO_AF(GPIOH_PIN14, 0U) | PIN_AFIO_AF(GPIOH_PIN15, 0U)) - -/* - * GPIOI setup: - * - * PI0  - PIN0                      (input pullup). - * PI1  - PIN1                      (input pullup). - * PI2  - PIN2                      (input pullup). - * PI3  - PIN3                      (input pullup). - * PI4  - PIN4                      (input pullup). - * PI5  - PIN5                      (input pullup). - * PI6  - PIN6                      (input pullup). - * PI7  - PIN7                      (input pullup). - * PI8  - PIN8                      (input pullup). - * PI9  - PIN9                      (input pullup). - * PI10 - PIN10                     (input pullup). - * PI11 - PIN11                     (input pullup). - * PI12 - PIN12                     (input pullup). - * PI13 - PIN13                     (input pullup). - * PI14 - PIN14                     (input pullup). - * PI15 - PIN15                     (input pullup). - */ -#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | PIN_MODE_INPUT(GPIOI_PIN1) | PIN_MODE_INPUT(GPIOI_PIN2) | PIN_MODE_INPUT(GPIOI_PIN3) | PIN_MODE_INPUT(GPIOI_PIN4) | PIN_MODE_INPUT(GPIOI_PIN5) | PIN_MODE_INPUT(GPIOI_PIN6) | PIN_MODE_INPUT(GPIOI_PIN7) | PIN_MODE_INPUT(GPIOI_PIN8) | PIN_MODE_INPUT(GPIOI_PIN9) | PIN_MODE_INPUT(GPIOI_PIN10) | PIN_MODE_INPUT(GPIOI_PIN11) | PIN_MODE_INPUT(GPIOI_PIN12) | PIN_MODE_INPUT(GPIOI_PIN13) | PIN_MODE_INPUT(GPIOI_PIN14) | PIN_MODE_INPUT(GPIOI_PIN15)) -#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | PIN_OTYPE_PUSHPULL(GPIOI_PIN15)) -#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | PIN_OSPEED_HIGH(GPIOI_PIN1) | PIN_OSPEED_HIGH(GPIOI_PIN2) | PIN_OSPEED_HIGH(GPIOI_PIN3) | PIN_OSPEED_HIGH(GPIOI_PIN4) | PIN_OSPEED_HIGH(GPIOI_PIN5) | PIN_OSPEED_HIGH(GPIOI_PIN6) | PIN_OSPEED_HIGH(GPIOI_PIN7) | PIN_OSPEED_HIGH(GPIOI_PIN8) | PIN_OSPEED_HIGH(GPIOI_PIN9) | PIN_OSPEED_HIGH(GPIOI_PIN10) | PIN_OSPEED_HIGH(GPIOI_PIN11) | PIN_OSPEED_HIGH(GPIOI_PIN12) | PIN_OSPEED_HIGH(GPIOI_PIN13) | PIN_OSPEED_HIGH(GPIOI_PIN14) | PIN_OSPEED_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | PIN_PUPDR_PULLUP(GPIOI_PIN1) | PIN_PUPDR_PULLUP(GPIOI_PIN2) | PIN_PUPDR_PULLUP(GPIOI_PIN3) | PIN_PUPDR_PULLUP(GPIOI_PIN4) | PIN_PUPDR_PULLUP(GPIOI_PIN5) | PIN_PUPDR_PULLUP(GPIOI_PIN6) | PIN_PUPDR_PULLUP(GPIOI_PIN7) | PIN_PUPDR_PULLUP(GPIOI_PIN8) | PIN_PUPDR_PULLUP(GPIOI_PIN9) | PIN_PUPDR_PULLUP(GPIOI_PIN10) | PIN_PUPDR_PULLUP(GPIOI_PIN11) | PIN_PUPDR_PULLUP(GPIOI_PIN12) | PIN_PUPDR_PULLUP(GPIOI_PIN13) | PIN_PUPDR_PULLUP(GPIOI_PIN14) | PIN_PUPDR_PULLUP(GPIOI_PIN15)) -#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | PIN_ODR_HIGH(GPIOI_PIN1) | PIN_ODR_HIGH(GPIOI_PIN2) | PIN_ODR_HIGH(GPIOI_PIN3) | PIN_ODR_HIGH(GPIOI_PIN4) | PIN_ODR_HIGH(GPIOI_PIN5) | PIN_ODR_HIGH(GPIOI_PIN6) | PIN_ODR_HIGH(GPIOI_PIN7) | PIN_ODR_HIGH(GPIOI_PIN8) | PIN_ODR_HIGH(GPIOI_PIN9) | PIN_ODR_HIGH(GPIOI_PIN10) | PIN_ODR_HIGH(GPIOI_PIN11) | PIN_ODR_HIGH(GPIOI_PIN12) | PIN_ODR_HIGH(GPIOI_PIN13) | PIN_ODR_HIGH(GPIOI_PIN14) | PIN_ODR_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | PIN_AFIO_AF(GPIOI_PIN1, 0U) | PIN_AFIO_AF(GPIOI_PIN2, 0U) | PIN_AFIO_AF(GPIOI_PIN3, 0U) | PIN_AFIO_AF(GPIOI_PIN4, 0U) | PIN_AFIO_AF(GPIOI_PIN5, 0U) | PIN_AFIO_AF(GPIOI_PIN6, 0U) | PIN_AFIO_AF(GPIOI_PIN7, 0U)) -#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | PIN_AFIO_AF(GPIOI_PIN9, 0U) | PIN_AFIO_AF(GPIOI_PIN10, 0U) | PIN_AFIO_AF(GPIOI_PIN11, 0U) | PIN_AFIO_AF(GPIOI_PIN12, 0U) | PIN_AFIO_AF(GPIOI_PIN13, 0U) | PIN_AFIO_AF(GPIOI_PIN14, 0U) | PIN_AFIO_AF(GPIOI_PIN15, 0U)) - -/*===========================================================================*/ -/* External declarations.                                                    */ -/*===========================================================================*/ - -#if !defined(_FROM_ASM_) -#    ifdef __cplusplus -extern "C" { -#    endif -void boardInit(void); -#    ifdef __cplusplus -} -#    endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/drivers/boards/BLACKPILL_STM32_F411/cfg/board.chcfg b/drivers/boards/BLACKPILL_STM32_F411/cfg/board.chcfg deleted file mode 100644 index 3095409cca..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/cfg/board.chcfg +++ /dev/null @@ -1,1193 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32F4xx board Template --> -<board -  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" -  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f4xx_board.xsd"> -  <configuration_settings> -    <templates_path>resources/gencfg/processors/boards/stm32f4xx/templates</templates_path> -    <output_path>..</output_path> -    <hal_version>5.0.x</hal_version> -  </configuration_settings> -  <board_name>STMicroelectronics STM32 Nucleo64-F411RE</board_name> -  <board_id>ST_NUCLEO64_F411RE</board_id> -  <board_functions></board_functions> -  <subtype>STM32F411xE</subtype> -  <clocks -    HSEFrequency="8000000" -    HSEBypass="true" -    LSEFrequency="0" -    LSEBypass="false" -    VDD="300" /> -  <ports> -    <GPIOA> -      <pin0 -        ID="ARD_A0 ADC1_IN0" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="ARD_A1 ADC1_IN1" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="ARD_D1 USART2_TX" -        Type="PushPull" -        Level="High" -        Speed="High" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="7" /> -      <pin3 -        ID="ARD_D0 USART2_RX" -        Type="PushPull" -        Level="High" -        Speed="High" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="7" /> -      <pin4 -        ID="ARD_A2 ADC1_IN4" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="LED_GREEN ARD_D13" -        Type="PushPull" -        Level="Low" -        Speed="High" -        Resistor="Floating" -        Mode="Output" -        Alternate="0" /> -      <pin6 -        ID="ARD_D12" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="ARD_D11" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="ARD_D7" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="ARD_D8" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="ARD_D2" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="OTG_FS_DM" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="10" /> -      <pin12 -        ID="OTG_FS_DP" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Alternate" -        Alternate="10" /> -      <pin13 -        ID="SWDIO" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Alternate" -        Alternate="0" /> -      <pin14 -        ID="SWCLK" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullDown" -        Mode="Alternate" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOA> -    <GPIOB> -      <pin0 -        ID="ARD_A3 ADC1_IN8" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="SWO ARD_D3" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Alternate" -        Alternate="0" /> -      <pin4 -        ID="ARD_D5" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="ARD_D4" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="ARD_D10" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="ARD_D15" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="ARD_D14" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="ARD_D6" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOB> -    <GPIOC> -      <pin0 -        ID="ARD_A5 ADC1_IN10" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="ARD_A4 ADC1_IN11" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="ARD_D9" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="BUTTON" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="OSC32_IN" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="OSC32_OUT" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -    </GPIOC> -    <GPIOD> -      <pin0 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOD> -    <GPIOE> -      <pin0 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOE> -    <GPIOF> -      <pin0 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOF> -    <GPIOG> -      <pin0 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOG> -    <GPIOH> -      <pin0 -        ID="OSC_IN" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="OSC_OUT" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="Floating" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOH> -    <GPIOI> -      <pin0 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Level="High" -        Speed="Maximum" -        Resistor="PullUp" -        Mode="Input" -        Alternate="0" /> -    </GPIOI> -  </ports> -</board> diff --git a/drivers/boards/BLACKPILL_STM32_F411/cfg/board.fmpp b/drivers/boards/BLACKPILL_STM32_F411/cfg/board.fmpp deleted file mode 100644 index 41754c1414..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/cfg/board.fmpp +++ /dev/null @@ -1,15 +0,0 @@ -sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f4xx/templates -outputRoot: .. -dataRoot: . - -freemarkerLinks: { -    lib: ../../../../../tools/ftl/libs -} - -data : { -  doc1:xml ( -    board.chcfg -    { -    } -  ) -} diff --git a/drivers/boards/GENERIC_STM32_F072XB/cfg/board.chcfg b/drivers/boards/GENERIC_STM32_F072XB/cfg/board.chcfg deleted file mode 100644 index e6ceecb62e..0000000000 --- a/drivers/boards/GENERIC_STM32_F072XB/cfg/board.chcfg +++ /dev/null @@ -1,703 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32F0xx board Template --> -<board -  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" -  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd"> -  <configuration_settings> -    <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path> -    <output_path>..</output_path> -    <hal_version>5.0.x</hal_version> -  </configuration_settings> -  <board_name>ST STM32F072B-Discovery</board_name> -  <board_id>ST_STM32F072B_DISCOVERY</board_id> -  <board_functions></board_functions> -  <subtype>STM32F072xB</subtype> -  <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0" -  	LSEBypass="false" LSEDrive="3 High Drive (default)" /> -  <ports> -    <GPIOA> -      <pin0 -        ID="BUTTON" -        Type="PushPull" -        Speed="Minimum" -        Resistor="Floating" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="USB_DM" -        Type="PushPull" -        Speed="Minimum" -        Resistor="Floating" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="USB_DP" -        Type="PushPull" -        Speed="Minimum" -        Resistor="Floating" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="SWDIO" -        Type="PushPull" -        Speed="Maximum" -        Resistor="PullUp" -        Level="High" -        Mode="Alternate" -        Alternate="0" /> -      <pin14 -        ID="SWCLK" -        Type="PushPull" -        Speed="Maximum" -        Resistor="PullDown" -        Level="High" -        Mode="Alternate" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Speed="Maximum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -    </GPIOA> -    <GPIOB> -      <pin0 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Speed="Maximum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Speed="Maximum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Speed="Maximum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="SPI2_SCK" -        Type="PushPull" -        Speed="Minimum" -        Resistor="Floating" -        Level="High" -        Mode="Alternate" -        Alternate="0" /> -      <pin14 -        ID="SPI2_MISO" -        Type="PushPull" -        Speed="Minimum" -        Resistor="Floating" -        Level="High" -        Mode="Alternate" -        Alternate="0" /> -      <pin15 -        ID="SPI2_MOSI" -        Type="PushPull" -        Speed="Minimum" -        Resistor="Floating" -        Level="High" -        Mode="Alternate" -        Alternate="0" /> -    </GPIOB> -    <GPIOC> -      <pin0 -        ID="MEMS_CS" -        Type="PushPull" -        Speed="Maximum" -        Resistor="Floating" -        Level="High" -        Mode="Output" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="LED_RED" -        Type="PushPull" -        Speed="Maximum" -        Resistor="Floating" -        Level="Low" -        Mode="Output" -        Alternate="0" /> -      <pin7 -        ID="LED_BLUE" -        Type="PushPull" -        Speed="Maximum" -        Resistor="Floating" -        Level="Low" -        Mode="Output" -        Alternate="0" /> -      <pin8 -        ID="LED_ORANGE" -        Type="PushPull" -        Speed="Maximum" -        Resistor="Floating" -        Level="Low" -        Mode="Output" -        Alternate="0" ></pin8> -      <pin9 -        ID="LED_GREEN" -        Type="PushPull" -        Speed="Maximum" -        Resistor="Floating" -        Level="Low" -        Mode="Output" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="OSC32_IN" -        Type="PushPull" -        Speed="Maximum" -        Resistor="Floating" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="OSC32_OUT" -        Type="PushPull" -        Speed="Maximum" -        Resistor="Floating" -        Level="High" -        Mode="Input" -        Alternate="0" /> -    </GPIOC> -    <GPIOD> -      <pin0 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -    </GPIOD> -    <GPIOE> -    	<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    	<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" -    		Level="High" Mode="Input" Alternate="0" /> -    </GPIOE> -    <GPIOF> -      <pin0 -        ID="OSC_IN" -        Type="PushPull" -        Speed="Minimum" -        Resistor="Floating" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin1 -        ID="OSC_OUT" -        Type="PushPull" -        Speed="Minimum" -        Resistor="Floating" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin2 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin3 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin4 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin5 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin6 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin7 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin8 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin9 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin10 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin11 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin12 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin13 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin14 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -      <pin15 -        ID="" -        Type="PushPull" -        Speed="Minimum" -        Resistor="PullUp" -        Level="High" -        Mode="Input" -        Alternate="0" /> -    </GPIOF> -  </ports> -</board> diff --git a/drivers/boards/GENERIC_STM32_F072XB/cfg/board.fmpp b/drivers/boards/GENERIC_STM32_F072XB/cfg/board.fmpp deleted file mode 100644 index 55cd396e41..0000000000 --- a/drivers/boards/GENERIC_STM32_F072XB/cfg/board.fmpp +++ /dev/null @@ -1,15 +0,0 @@ -sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f0xx/templates -outputRoot: .. -dataRoot: . - -freemarkerLinks: { -    lib: ../../../../../tools/ftl/libs -} - -data : { -  doc1:xml ( -    board.chcfg -    { -    } -  ) -} diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.mk b/drivers/boards/GENERIC_STM32_F303XC/board.mk deleted file mode 100644 index 43377629a3..0000000000 --- a/drivers/boards/GENERIC_STM32_F303XC/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC diff --git a/drivers/boards/IC_TEENSY_3_1/board.mk b/drivers/boards/IC_TEENSY_3_1/board.mk deleted file mode 100644 index 62f5b751c7..0000000000 --- a/drivers/boards/IC_TEENSY_3_1/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/IC_TEENSY_3_1/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/IC_TEENSY_3_1 diff --git a/drivers/boards/STM32_F103_STM32DUINO/board.mk b/drivers/boards/STM32_F103_STM32DUINO/board.mk deleted file mode 100644 index 81141bdfd9..0000000000 --- a/drivers/boards/STM32_F103_STM32DUINO/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/STM32_F103_STM32DUINO/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/STM32_F103_STM32DUINO diff --git a/keyboards/handwired/onekey/blackpill_f401/halconf.h b/keyboards/handwired/onekey/blackpill_f401/halconf.h index a8db392aaa..d73c214ec6 100644 --- a/keyboards/handwired/onekey/blackpill_f401/halconf.h +++ b/keyboards/handwired/onekey/blackpill_f401/halconf.h @@ -1,525 +1,20 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -/** - * @file    templates/halconf.h - * @brief   HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - *          various device drivers from your application. You may also use - *          this file in order to override the device drivers default settings. +/* Copyright 2020 Nick Brassel (tzarc)   * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief   Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL                         TRUE -#endif - -/** - * @brief   Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC                         FALSE -#endif - -/** - * @brief   Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN                         FALSE -#endif - -/** - * @brief   Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY                         FALSE -#endif - -/** - * @brief   Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC                         FALSE -#endif - -/** - * @brief   Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT                         FALSE -#endif - -/** - * @brief   Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C                         FALSE -#endif - -/** - * @brief   Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S                         FALSE -#endif - -/** - * @brief   Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU                         FALSE -#endif - -/** - * @brief   Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC                         FALSE -#endif - -/** - * @brief   Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI                     FALSE -#endif - -/** - * @brief   Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM                         FALSE -#endif - -/** - * @brief   Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC                         FALSE -#endif - -/** - * @brief   Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC                         FALSE -#endif - -/** - * @brief   Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL                      FALSE -#endif - -/** - * @brief   Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB                  FALSE -#endif - -/** - * @brief   Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO                         FALSE -#endif - -/** - * @brief   Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI                         FALSE -#endif - -/** - * @brief   Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG                        FALSE -#endif - -/** - * @brief   Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART                        FALSE -#endif - -/** - * @brief   Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB                         TRUE -#endif - -/** - * @brief   Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG                         FALSE -#endif - -/** - * @brief   Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI                        FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS                   FALSE -#endif - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT                        FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT                        TRUE -#endif - -/** - * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION            TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE                  TRUE -#endif - -/** - * @brief   Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS           FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - *          implementation for algorithms not supported by the underlying - *          hardware. - * @note    Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK                FALSE -#endif - -/** - * @brief   Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK            FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT                        TRUE -#endif - -/** - * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION            TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION            TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY                   FALSE -#endif - -/** - * @brief   Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS                      TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings.                                          */ -/*===========================================================================*/ - -/** - * @brief   Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - *          routines releasing some extra CPU time for the threads with - *          lower priority, this may slow down the driver a bit however. - *          This option is recommended also if the SPI driver does not - *          use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING                    TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Number of initialization attempts before rejecting the card. - * @note    Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY                      100 -#endif - -/** - * @brief   Include support for MMC cards. - * @note    MMC support is not yet implemented so this option must be kept - *          at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT                     FALSE -#endif - -/** - * @brief   Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - *          routines releasing some extra CPU time for the threads with - *          lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING                    TRUE -#endif - -/** - * @brief   OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20                    0x50FF8000U -#endif - -/** - * @brief   OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR                        0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings.                                           */ -/*===========================================================================*/ - -/** - * @brief   Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - *          default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE              38400 -#endif - -/** - * @brief   Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - *          buffers depending on the requirements of your application. - * @note    The default is 16 bytes for both the transmission and receive - *          buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE                 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting.                                        */ -/*===========================================================================*/ - -/** - * @brief   Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - *          the USB data endpoint maximum packet size. - * @note    The default is 256 bytes for both the transmission and receive - *          buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE             256 -#endif - -/** - * @brief   Serial over USB number of buffers. - * @note    The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER           2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT                        TRUE -#endif - -/** - * @brief   Enables circular transfers APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR                    FALSE -#endif - - -/** - * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION            TRUE -#endif - -/** - * @brief   Handling method for SPI CS line. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings.                                             */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT                       FALSE -#endif - -/** - * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION           FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT                        TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings.                                             */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT                       TRUE -#endif - -/** - * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. + *  This program is free software: you can redistribute it and/or modify + *  it under the terms of the GNU General Public License as published by + *  the Free Software Foundation, either version 3 of the License, or + *  (at your option) any later version. + * + *  This program is distributed in the hope that it will be useful, + *  but WITHOUT ANY WARRANTY; without even the implied warranty of + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *  GNU General Public License for more details. + * + *  You should have received a copy of the GNU General Public License + *  along with this program.  If not, see <https://www.gnu.org/licenses/>.   */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION           TRUE -#endif +#pragma once -#endif /* HALCONF_H */ +#define HAL_USE_I2C TRUE -/** @} */ +#include_next "halconf.h" diff --git a/keyboards/handwired/onekey/blackpill_f401/mcuconf.h b/keyboards/handwired/onekey/blackpill_f401/mcuconf.h index ba6e934fe7..33e07847b4 100644 --- a/keyboards/handwired/onekey/blackpill_f401/mcuconf.h +++ b/keyboards/handwired/onekey/blackpill_f401/mcuconf.h @@ -1,253 +1,21 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 Nick Brassel (tzarc)   * - * IRQ priorities: - * 15...0       Lowest...Highest. + *  This program is free software: you can redistribute it and/or modify + *  it under the terms of the GNU General Public License as published by + *  the Free Software Foundation, either version 3 of the License, or + *  (at your option) any later version.   * - * DMA priorities: - * 0...3        Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT                       FALSE -#define STM32_HSI_ENABLED                   TRUE -#define STM32_LSI_ENABLED                   TRUE -#define STM32_HSE_ENABLED                   TRUE -#define STM32_LSE_ENABLED                   FALSE -#define STM32_CLOCK48_REQUIRED              TRUE -#define STM32_SW                            STM32_SW_PLL -#define STM32_PLLSRC                        STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE                    25        -#define STM32_PLLN_VALUE                    336      -#define STM32_PLLP_VALUE                    4        -#define STM32_PLLQ_VALUE                    7        -#define STM32_HPRE                          STM32_HPRE_DIV1   -#define STM32_PPRE1                         STM32_PPRE1_DIV4   -#define STM32_PPRE2                         STM32_PPRE2_DIV2  -#define STM32_RTCSEL                        STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE                  8 -#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI -#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC                        STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE                 192 -#define STM32_PLLI2SR_VALUE                 5 -#define STM32_PVD_ENABLE                    FALSE -#define STM32_PLS                           STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE                 FALSE - -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY            6 -#define STM32_IRQ_EXTI1_PRIORITY            6 -#define STM32_IRQ_EXTI2_PRIORITY            6 -#define STM32_IRQ_EXTI3_PRIORITY            6 -#define STM32_IRQ_EXTI4_PRIORITY            6 -#define STM32_IRQ_EXTI5_9_PRIORITY          6 -#define STM32_IRQ_EXTI10_15_PRIORITY        6 -#define STM32_IRQ_EXTI16_PRIORITY           6 -#define STM32_IRQ_EXTI17_PRIORITY           15 -#define STM32_IRQ_EXTI18_PRIORITY           6 -#define STM32_IRQ_EXTI19_PRIORITY           6 -#define STM32_IRQ_EXTI20_PRIORITY           6 -#define STM32_IRQ_EXTI21_PRIORITY           15 -#define STM32_IRQ_EXTI22_PRIORITY           15 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1                  FALSE -#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC1_DMA_PRIORITY         2 -#define STM32_ADC_IRQ_PRIORITY              6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1                  FALSE -#define STM32_GPT_USE_TIM2                  FALSE -#define STM32_GPT_USE_TIM3                  FALSE -#define STM32_GPT_USE_TIM4                  FALSE -#define STM32_GPT_USE_TIM5                  FALSE -#define STM32_GPT_USE_TIM9                  FALSE -#define STM32_GPT_USE_TIM11                 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY         7 -#define STM32_GPT_TIM2_IRQ_PRIORITY         7 -#define STM32_GPT_TIM3_IRQ_PRIORITY         7 -#define STM32_GPT_TIM4_IRQ_PRIORITY         7 -#define STM32_GPT_TIM5_IRQ_PRIORITY         7 -#define STM32_GPT_TIM9_IRQ_PRIORITY         7 -#define STM32_GPT_TIM11_IRQ_PRIORITY        7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1                  FALSE -#define STM32_I2C_USE_I2C2                  FALSE -#define STM32_I2C_USE_I2C3                  FALSE -#define STM32_I2C_BUSY_TIMEOUT              50 -#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY         5 -#define STM32_I2C_I2C2_IRQ_PRIORITY         5 -#define STM32_I2C_I2C3_IRQ_PRIORITY         5 -#define STM32_I2C_I2C1_DMA_PRIORITY         3 -#define STM32_I2C_I2C2_DMA_PRIORITY         3 -#define STM32_I2C_I2C3_DMA_PRIORITY         3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2                  FALSE -#define STM32_I2S_USE_SPI3                  FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY         10 -#define STM32_I2S_SPI3_IRQ_PRIORITY         10 -#define STM32_I2S_SPI2_DMA_PRIORITY         1 -#define STM32_I2S_SPI3_DMA_PRIORITY         1 -#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1                  FALSE -#define STM32_ICU_USE_TIM2                  FALSE -#define STM32_ICU_USE_TIM3                  FALSE -#define STM32_ICU_USE_TIM4                  FALSE -#define STM32_ICU_USE_TIM5                  FALSE -#define STM32_ICU_USE_TIM9                  FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY         7 -#define STM32_ICU_TIM2_IRQ_PRIORITY         7 -#define STM32_ICU_TIM3_IRQ_PRIORITY         7 -#define STM32_ICU_TIM4_IRQ_PRIORITY         7 -#define STM32_ICU_TIM5_IRQ_PRIORITY         7 -#define STM32_ICU_TIM9_IRQ_PRIORITY         7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED              FALSE -#define STM32_PWM_USE_TIM1                  FALSE -#define STM32_PWM_USE_TIM2                  FALSE -#define STM32_PWM_USE_TIM3                  FALSE -#define STM32_PWM_USE_TIM4                  FALSE -#define STM32_PWM_USE_TIM5                  FALSE -#define STM32_PWM_USE_TIM9                  FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY         7 -#define STM32_PWM_TIM2_IRQ_PRIORITY         7 -#define STM32_PWM_TIM3_IRQ_PRIORITY         7 -#define STM32_PWM_TIM4_IRQ_PRIORITY         7 -#define STM32_PWM_TIM5_IRQ_PRIORITY         7 -#define STM32_PWM_TIM9_IRQ_PRIORITY         7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1             FALSE -#define STM32_SERIAL_USE_USART2             FALSE -#define STM32_SERIAL_USE_USART6             FALSE -#define STM32_SERIAL_USART1_PRIORITY        12 -#define STM32_SERIAL_USART2_PRIORITY        12 -#define STM32_SERIAL_USART6_PRIORITY        12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1                  FALSE -#define STM32_SPI_USE_SPI2                  FALSE -#define STM32_SPI_USE_SPI3                  FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY         1 -#define STM32_SPI_SPI2_DMA_PRIORITY         1 -#define STM32_SPI_SPI3_DMA_PRIORITY         1 -#define STM32_SPI_SPI1_IRQ_PRIORITY         10 -#define STM32_SPI_SPI2_IRQ_PRIORITY         10 -#define STM32_SPI_SPI3_IRQ_PRIORITY         10 -#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY               8 -#define STM32_ST_USE_TIMER                  2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1               FALSE -#define STM32_UART_USE_USART2               FALSE -#define STM32_UART_USE_USART6               FALSE -#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY      12 -#define STM32_UART_USART2_IRQ_PRIORITY      12 -#define STM32_UART_USART6_IRQ_PRIORITY      12 -#define STM32_UART_USART1_DMA_PRIORITY      0 -#define STM32_UART_USART2_DMA_PRIORITY      0 -#define STM32_UART_USART6_DMA_PRIORITY      0 -#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure") - -/* - * USB driver system settings. + *  This program is distributed in the hope that it will be useful, + *  but WITHOUT ANY WARRANTY; without even the implied warranty of + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *  GNU General Public License for more details. + * + *  You should have received a copy of the GNU General Public License + *  along with this program.  If not, see <https://www.gnu.org/licenses/>.   */ -#define STM32_USB_USE_OTG1                  TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY         14 -#define STM32_USB_OTG1_RX_FIFO_SIZE         512 -#define STM32_USB_OTG_THREAD_PRIO           NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE     128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI      0 +#pragma once -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG                  FALSE +#include_next "mcuconf.h" -#endif /* MCUCONF_H */ +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE diff --git a/keyboards/handwired/onekey/blackpill_f411/halconf.h b/keyboards/handwired/onekey/blackpill_f411/halconf.h index a8db392aaa..d73c214ec6 100644 --- a/keyboards/handwired/onekey/blackpill_f411/halconf.h +++ b/keyboards/handwired/onekey/blackpill_f411/halconf.h @@ -1,525 +1,20 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -/** - * @file    templates/halconf.h - * @brief   HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - *          various device drivers from your application. You may also use - *          this file in order to override the device drivers default settings. +/* Copyright 2020 Nick Brassel (tzarc)   * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief   Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL                         TRUE -#endif - -/** - * @brief   Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC                         FALSE -#endif - -/** - * @brief   Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN                         FALSE -#endif - -/** - * @brief   Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY                         FALSE -#endif - -/** - * @brief   Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC                         FALSE -#endif - -/** - * @brief   Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT                         FALSE -#endif - -/** - * @brief   Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C                         FALSE -#endif - -/** - * @brief   Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S                         FALSE -#endif - -/** - * @brief   Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU                         FALSE -#endif - -/** - * @brief   Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC                         FALSE -#endif - -/** - * @brief   Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI                     FALSE -#endif - -/** - * @brief   Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM                         FALSE -#endif - -/** - * @brief   Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC                         FALSE -#endif - -/** - * @brief   Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC                         FALSE -#endif - -/** - * @brief   Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL                      FALSE -#endif - -/** - * @brief   Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB                  FALSE -#endif - -/** - * @brief   Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO                         FALSE -#endif - -/** - * @brief   Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI                         FALSE -#endif - -/** - * @brief   Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG                        FALSE -#endif - -/** - * @brief   Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART                        FALSE -#endif - -/** - * @brief   Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB                         TRUE -#endif - -/** - * @brief   Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG                         FALSE -#endif - -/** - * @brief   Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI                        FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS                   FALSE -#endif - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT                        FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT                        TRUE -#endif - -/** - * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION            TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE                  TRUE -#endif - -/** - * @brief   Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS           FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - *          implementation for algorithms not supported by the underlying - *          hardware. - * @note    Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK                FALSE -#endif - -/** - * @brief   Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK            FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT                        TRUE -#endif - -/** - * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION            TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION            TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY                   FALSE -#endif - -/** - * @brief   Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS                      TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings.                                          */ -/*===========================================================================*/ - -/** - * @brief   Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - *          routines releasing some extra CPU time for the threads with - *          lower priority, this may slow down the driver a bit however. - *          This option is recommended also if the SPI driver does not - *          use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING                    TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Number of initialization attempts before rejecting the card. - * @note    Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY                      100 -#endif - -/** - * @brief   Include support for MMC cards. - * @note    MMC support is not yet implemented so this option must be kept - *          at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT                     FALSE -#endif - -/** - * @brief   Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - *          routines releasing some extra CPU time for the threads with - *          lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING                    TRUE -#endif - -/** - * @brief   OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20                    0x50FF8000U -#endif - -/** - * @brief   OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR                        0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings.                                           */ -/*===========================================================================*/ - -/** - * @brief   Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - *          default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE              38400 -#endif - -/** - * @brief   Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - *          buffers depending on the requirements of your application. - * @note    The default is 16 bytes for both the transmission and receive - *          buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE                 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting.                                        */ -/*===========================================================================*/ - -/** - * @brief   Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - *          the USB data endpoint maximum packet size. - * @note    The default is 256 bytes for both the transmission and receive - *          buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE             256 -#endif - -/** - * @brief   Serial over USB number of buffers. - * @note    The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER           2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT                        TRUE -#endif - -/** - * @brief   Enables circular transfers APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR                    FALSE -#endif - - -/** - * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION            TRUE -#endif - -/** - * @brief   Handling method for SPI CS line. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings.                                             */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT                       FALSE -#endif - -/** - * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION           FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT                        TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings.                                             */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT                       TRUE -#endif - -/** - * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. + *  This program is free software: you can redistribute it and/or modify + *  it under the terms of the GNU General Public License as published by + *  the Free Software Foundation, either version 3 of the License, or + *  (at your option) any later version. + * + *  This program is distributed in the hope that it will be useful, + *  but WITHOUT ANY WARRANTY; without even the implied warranty of + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *  GNU General Public License for more details. + * + *  You should have received a copy of the GNU General Public License + *  along with this program.  If not, see <https://www.gnu.org/licenses/>.   */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION           TRUE -#endif +#pragma once -#endif /* HALCONF_H */ +#define HAL_USE_I2C TRUE -/** @} */ +#include_next "halconf.h" diff --git a/keyboards/handwired/onekey/blackpill_f411/mcuconf.h b/keyboards/handwired/onekey/blackpill_f411/mcuconf.h index 0394ff56bb..33e07847b4 100644 --- a/keyboards/handwired/onekey/blackpill_f411/mcuconf.h +++ b/keyboards/handwired/onekey/blackpill_f411/mcuconf.h @@ -1,253 +1,21 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 Nick Brassel (tzarc)   * - * IRQ priorities: - * 15...0       Lowest...Highest. + *  This program is free software: you can redistribute it and/or modify + *  it under the terms of the GNU General Public License as published by + *  the Free Software Foundation, either version 3 of the License, or + *  (at your option) any later version.   * - * DMA priorities: - * 0...3        Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT                       FALSE -#define STM32_HSI_ENABLED                   TRUE -#define STM32_LSI_ENABLED                   TRUE -#define STM32_HSE_ENABLED                   TRUE -#define STM32_LSE_ENABLED                   FALSE -#define STM32_CLOCK48_REQUIRED              TRUE -#define STM32_SW                            STM32_SW_PLL -#define STM32_PLLSRC                        STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE                    25 -#define STM32_PLLN_VALUE                    384 -#define STM32_PLLP_VALUE                    4 -#define STM32_PLLQ_VALUE                    8 -#define STM32_HPRE                          STM32_HPRE_DIV1 -#define STM32_PPRE1                         STM32_PPRE1_DIV4 -#define STM32_PPRE2                         STM32_PPRE2_DIV2 -#define STM32_RTCSEL                        STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE                  8 -#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI -#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC                        STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE                 192 -#define STM32_PLLI2SR_VALUE                 5 -#define STM32_PVD_ENABLE                    FALSE -#define STM32_PLS                           STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE                 FALSE - -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY            6 -#define STM32_IRQ_EXTI1_PRIORITY            6 -#define STM32_IRQ_EXTI2_PRIORITY            6 -#define STM32_IRQ_EXTI3_PRIORITY            6 -#define STM32_IRQ_EXTI4_PRIORITY            6 -#define STM32_IRQ_EXTI5_9_PRIORITY          6 -#define STM32_IRQ_EXTI10_15_PRIORITY        6 -#define STM32_IRQ_EXTI16_PRIORITY           6 -#define STM32_IRQ_EXTI17_PRIORITY           15 -#define STM32_IRQ_EXTI18_PRIORITY           6 -#define STM32_IRQ_EXTI19_PRIORITY           6 -#define STM32_IRQ_EXTI20_PRIORITY           6 -#define STM32_IRQ_EXTI21_PRIORITY           15 -#define STM32_IRQ_EXTI22_PRIORITY           15 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1                  FALSE -#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC1_DMA_PRIORITY         2 -#define STM32_ADC_IRQ_PRIORITY              6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1                  FALSE -#define STM32_GPT_USE_TIM2                  FALSE -#define STM32_GPT_USE_TIM3                  FALSE -#define STM32_GPT_USE_TIM4                  FALSE -#define STM32_GPT_USE_TIM5                  FALSE -#define STM32_GPT_USE_TIM9                  FALSE -#define STM32_GPT_USE_TIM11                 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY         7 -#define STM32_GPT_TIM2_IRQ_PRIORITY         7 -#define STM32_GPT_TIM3_IRQ_PRIORITY         7 -#define STM32_GPT_TIM4_IRQ_PRIORITY         7 -#define STM32_GPT_TIM5_IRQ_PRIORITY         7 -#define STM32_GPT_TIM9_IRQ_PRIORITY         7 -#define STM32_GPT_TIM11_IRQ_PRIORITY        7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1                  FALSE -#define STM32_I2C_USE_I2C2                  FALSE -#define STM32_I2C_USE_I2C3                  FALSE -#define STM32_I2C_BUSY_TIMEOUT              50 -#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY         5 -#define STM32_I2C_I2C2_IRQ_PRIORITY         5 -#define STM32_I2C_I2C3_IRQ_PRIORITY         5 -#define STM32_I2C_I2C1_DMA_PRIORITY         3 -#define STM32_I2C_I2C2_DMA_PRIORITY         3 -#define STM32_I2C_I2C3_DMA_PRIORITY         3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2                  FALSE -#define STM32_I2S_USE_SPI3                  FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY         10 -#define STM32_I2S_SPI3_IRQ_PRIORITY         10 -#define STM32_I2S_SPI2_DMA_PRIORITY         1 -#define STM32_I2S_SPI3_DMA_PRIORITY         1 -#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1                  FALSE -#define STM32_ICU_USE_TIM2                  FALSE -#define STM32_ICU_USE_TIM3                  FALSE -#define STM32_ICU_USE_TIM4                  FALSE -#define STM32_ICU_USE_TIM5                  FALSE -#define STM32_ICU_USE_TIM9                  FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY         7 -#define STM32_ICU_TIM2_IRQ_PRIORITY         7 -#define STM32_ICU_TIM3_IRQ_PRIORITY         7 -#define STM32_ICU_TIM4_IRQ_PRIORITY         7 -#define STM32_ICU_TIM5_IRQ_PRIORITY         7 -#define STM32_ICU_TIM9_IRQ_PRIORITY         7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED              FALSE -#define STM32_PWM_USE_TIM1                  FALSE -#define STM32_PWM_USE_TIM2                  FALSE -#define STM32_PWM_USE_TIM3                  FALSE -#define STM32_PWM_USE_TIM4                  FALSE -#define STM32_PWM_USE_TIM5                  FALSE -#define STM32_PWM_USE_TIM9                  FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY         7 -#define STM32_PWM_TIM2_IRQ_PRIORITY         7 -#define STM32_PWM_TIM3_IRQ_PRIORITY         7 -#define STM32_PWM_TIM4_IRQ_PRIORITY         7 -#define STM32_PWM_TIM5_IRQ_PRIORITY         7 -#define STM32_PWM_TIM9_IRQ_PRIORITY         7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1             FALSE -#define STM32_SERIAL_USE_USART2             FALSE -#define STM32_SERIAL_USE_USART6             FALSE -#define STM32_SERIAL_USART1_PRIORITY        12 -#define STM32_SERIAL_USART2_PRIORITY        12 -#define STM32_SERIAL_USART6_PRIORITY        12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1                  FALSE -#define STM32_SPI_USE_SPI2                  FALSE -#define STM32_SPI_USE_SPI3                  FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY         1 -#define STM32_SPI_SPI2_DMA_PRIORITY         1 -#define STM32_SPI_SPI3_DMA_PRIORITY         1 -#define STM32_SPI_SPI1_IRQ_PRIORITY         10 -#define STM32_SPI_SPI2_IRQ_PRIORITY         10 -#define STM32_SPI_SPI3_IRQ_PRIORITY         10 -#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY               8 -#define STM32_ST_USE_TIMER                  2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1               FALSE -#define STM32_UART_USE_USART2               FALSE -#define STM32_UART_USE_USART6               FALSE -#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY      12 -#define STM32_UART_USART2_IRQ_PRIORITY      12 -#define STM32_UART_USART6_IRQ_PRIORITY      12 -#define STM32_UART_USART1_DMA_PRIORITY      0 -#define STM32_UART_USART2_DMA_PRIORITY      0 -#define STM32_UART_USART6_DMA_PRIORITY      0 -#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure") - -/* - * USB driver system settings. + *  This program is distributed in the hope that it will be useful, + *  but WITHOUT ANY WARRANTY; without even the implied warranty of + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *  GNU General Public License for more details. + * + *  You should have received a copy of the GNU General Public License + *  along with this program.  If not, see <https://www.gnu.org/licenses/>.   */ -#define STM32_USB_USE_OTG1                  TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY         14 -#define STM32_USB_OTG1_RX_FIFO_SIZE         512 -#define STM32_USB_OTG_THREAD_PRIO           NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE     128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI      0 +#pragma once -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG                  FALSE +#include_next "mcuconf.h" -#endif /* MCUCONF_H */ +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE diff --git a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.c b/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.c deleted file mode 100644 index 754dc5c4dd..0000000000 --- a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.c +++ /dev/null @@ -1,268 +0,0 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" -#include "stm32_gpio.h" - -/*===========================================================================*/ -/* Driver local definitions.                                                 */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables.                                                */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types.                                         */ -/*===========================================================================*/ - -/** - * @brief   Type of STM32 GPIO port setup. - */ -typedef struct { -  uint32_t              moder; -  uint32_t              otyper; -  uint32_t              ospeedr; -  uint32_t              pupdr; -  uint32_t              odr; -  uint32_t              afrl; -  uint32_t              afrh; -} gpio_setup_t; - -/** - * @brief   Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) -  gpio_setup_t          PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) -  gpio_setup_t          PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) -  gpio_setup_t          PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) -  gpio_setup_t          PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) -  gpio_setup_t          PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) -  gpio_setup_t          PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) -  gpio_setup_t          PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) -  gpio_setup_t          PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) -  gpio_setup_t          PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) -  gpio_setup_t          PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) -  gpio_setup_t          PKData; -#endif -} gpio_config_t; - -/** - * @brief   STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA -  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, -   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB -  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, -   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC -  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, -   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD -  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, -   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE -  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, -   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF -  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, -   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG -  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, -   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH -  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, -   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI -  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, -   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ -  {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, -   VAL_GPIOJ_ODR,   VAL_GPIOJ_AFRL,   VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK -  {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, -   VAL_GPIOK_ODR,   VAL_GPIOK_AFRL,   VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions.                                                   */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - -  gpiop->OTYPER  = config->otyper; -  gpiop->OSPEEDR = config->ospeedr; -  gpiop->PUPDR   = config->pupdr; -  gpiop->ODR     = config->odr; -  gpiop->AFRL    = config->afrl; -  gpiop->AFRH    = config->afrh; -  gpiop->MODER   = config->moder; -} - -static void stm32_gpio_init(void) { - -  /* Enabling GPIO-related clocks, the mask comes from the -     registry header file.*/ -  rccResetAHB(STM32_GPIO_EN_MASK); -  rccEnableAHB(STM32_GPIO_EN_MASK, true); - -  /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA -  gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB -  gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC -  gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD -  gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE -  gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF -  gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG -  gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH -  gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI -  gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ -  gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK -  gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers.                                                */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions.                                                */ -/*===========================================================================*/ - -/** - * @brief   Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - *          else. - */ -void __early_init(void) { -  extern void enter_bootloader_mode_if_requested(void); -  enter_bootloader_mode_if_requested(); - -  stm32_gpio_init(); -  stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief   SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - -  (void)sdcp; -  /* TODO: Fill the implementation.*/ -  return true; -} - -/** - * @brief   SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - -  (void)sdcp; -  /* TODO: Fill the implementation.*/ -  return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief   MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - -  (void)mmcp; -  /* TODO: Fill the implementation.*/ -  return true; -} - -/** - * @brief   MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - -  (void)mmcp; -  /* TODO: Fill the implementation.*/ -  return false; -} -#endif - -/** - * @brief   Board-specific initialization code. - * @todo    Add your board-specific code, if any. - */ -void boardInit(void) { - -} diff --git a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.mk b/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.mk deleted file mode 100644 index bbeb5bbff7..0000000000 --- a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F042X6/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F042X6 diff --git a/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.h b/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.h deleted file mode 100644 index 241d566afa..0000000000 --- a/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.h +++ /dev/null @@ -1,896 +0,0 @@ -/* -    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ -#ifndef _BOARD_H -#define _BOARD_H - -/* - * Setup for STMicroelectronics STM32 Nucleo32-F042K6 board. - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F042X6 -#define BOARD_NAME                  "Vinta PCB" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK                0U -#endif - -#define STM32_LSEDRV                (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK                0U -#endif - -/* - * MCU type as defined in the ST header. - */ -#define STM32F042x6 - -/* - * IO pins assignments. - */ -#define GPIOA_PIN0                  0U -#define GPIOA_PIN1                  1U -#define GPIOA_PIN2                  2U -#define GPIOA_PIN3                  3U -#define GPIOA_PIN4                  4U -#define GPIOA_PIN5                  5U -#define GPIOA_PIN6                  6U -#define GPIOA_PIN7                  7U -#define GPIOA_PIN8                  8U -#define GPIOA_PIN9                  9U -#define GPIOA_PIN10                 10U -#define GPIOA_PIN11                11U -#define GPIOA_PIN12                12U -#define GPIOA_PIN13                 13U -#define GPIOA_PIN14                 14U -#define GPIOA_PIN15                 15U - -#define GPIOB_PIN0                  0U -#define GPIOB_PIN1                  1U -#define GPIOB_PIN2                  2U -#define GPIOB_PIN3                  3U -#define GPIOB_PIN4                  4U -#define GPIOB_PIN5                  5U -#define GPIOB_PIN6                  6U -#define GPIOB_PIN7                  7U -#define GPIOB_PIN8                  8U -#define GPIOB_PIN9                  9U -#define GPIOB_PIN10                 10U -#define GPIOB_PIN11                 11U -#define GPIOB_PIN12                 12U -#define GPIOB_PIN13                 13U -#define GPIOB_PIN14                 14U -#define GPIOB_PIN15                 15U - -#define GPIOC_PIN0                  0U -#define GPIOC_PIN1                  1U -#define GPIOC_PIN2                  2U -#define GPIOC_PIN3                  3U -#define GPIOC_PIN4                  4U -#define GPIOC_PIN5                  5U -#define GPIOC_PIN6                  6U -#define GPIOC_PIN7                  7U -#define GPIOC_PIN8                  8U -#define GPIOC_PIN9                  9U -#define GPIOC_PIN10                 10U -#define GPIOC_PIN11                 11U -#define GPIOC_PIN12                 12U -#define GPIOC_PIN13                 13U -#define GPIOC_PIN14                 14U -#define GPIOC_PIN15                 15U - -#define GPIOD_PIN0                  0U -#define GPIOD_PIN1                  1U -#define GPIOD_PIN2                  2U -#define GPIOD_PIN3                  3U -#define GPIOD_PIN4                  4U -#define GPIOD_PIN5                  5U -#define GPIOD_PIN6                  6U -#define GPIOD_PIN7                  7U -#define GPIOD_PIN8                  8U -#define GPIOD_PIN9                  9U -#define GPIOD_PIN10                 10U -#define GPIOD_PIN11                 11U -#define GPIOD_PIN12                 12U -#define GPIOD_PIN13                 13U -#define GPIOD_PIN14                 14U -#define GPIOD_PIN15                 15U - -#define GPIOE_PIN0                  0U -#define GPIOE_PIN1                  1U -#define GPIOE_PIN2                  2U -#define GPIOE_PIN3                  3U -#define GPIOE_PIN4                  4U -#define GPIOE_PIN5                  5U -#define GPIOE_PIN6                  6U -#define GPIOE_PIN7                  7U -#define GPIOE_PIN8                  8U -#define GPIOE_PIN9                  9U -#define GPIOE_PIN10                 10U -#define GPIOE_PIN11                 11U -#define GPIOE_PIN12                 12U -#define GPIOE_PIN13                 13U -#define GPIOE_PIN14                 14U -#define GPIOE_PIN15                 15U - -#define GPIOF_PIN0                  0U -#define GPIOF_PIN1                  1U -#define GPIOF_PIN2                  2U -#define GPIOF_PIN3                  3U -#define GPIOF_PIN4                  4U -#define GPIOF_PIN5                  5U -#define GPIOF_PIN6                  6U -#define GPIOF_PIN7                  7U -#define GPIOF_PIN8                  8U -#define GPIOF_PIN9                  9U -#define GPIOF_PIN10                 10U -#define GPIOF_PIN11                 11U -#define GPIOF_PIN12                 12U -#define GPIOF_PIN13                 13U -#define GPIOF_PIN14                 14U -#define GPIOF_PIN15                 15U - -/* - * IO lines assignments. - */ - -#define LINE_BOOT0                  PAL_LINE(GPIOB, 8U) -#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U) -#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U) - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n)              (0U << (n)) -#define PIN_ODR_HIGH(n)             (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n)       (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n)) -#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0  - COL5 - * PA1  - COL4 - * PA2  - COL3 - * PA3  - COL2 - * PA4  - COL1 - * PA5  - COL0 - * PA6  - ROW4 - * PA7  - ROW3 - * PA8  - NC - * PA9  - ROW1 - * PA10 - ROW0 - * PA11 - USB_DM - * PA12 - USB_DP - * PA13 - COL15/SWDIO (for now, COL15) - * PA14 - COL14/SWCLK (for now, COL14) - * PA15 - COL13 - */ -#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_PIN0) |           \ -                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \ -                                     PIN_MODE_INPUT(GPIOA_PIN2) |     \ -                                     PIN_MODE_INPUT(GPIOA_PIN3) |         \ -                                     PIN_MODE_INPUT(GPIOA_PIN4) |         \ -                                     PIN_MODE_INPUT(GPIOA_PIN5) |         \ -                                     PIN_MODE_INPUT(GPIOA_PIN6) |         \ -                                     PIN_MODE_INPUT(GPIOA_PIN7) |         \ -                                     PIN_MODE_INPUT(GPIOA_PIN8) |         \ -                                     PIN_MODE_INPUT(GPIOA_PIN9) |         \ -                                     PIN_MODE_INPUT(GPIOA_PIN10) |         \ -                                     PIN_MODE_INPUT(GPIOA_PIN11) |         \ -                                     PIN_MODE_INPUT(GPIOA_PIN12) |         \ -                                     PIN_MODE_INPUT(GPIOA_PIN13) |      \ -                                     PIN_MODE_INPUT(GPIOA_PIN14) |      \ -                                     PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN11) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN12) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN13) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN14) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_PIN0) |          \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |          \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |         \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |         \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |        \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |         \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |        \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |        \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |        \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |        \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |        \ -                                     PIN_OSPEED_HIGH(GPIOA_PIN11) |        \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN12) |        \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN13) |         \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN14) |         \ -                                     PIN_OSPEED_VERYLOW(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR             (PIN_PUPDR_PULLUP(GPIOA_PIN0) |         \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |     \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |       \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |       \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |       \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |       \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |       \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |       \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |       \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |       \ -                                     PIN_PUPDR_FLOATING(GPIOA_PIN11) |       \ -                                     PIN_PUPDR_FLOATING(GPIOA_PIN12) |       \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN13) |        \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN14) |      \ -                                     PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_PIN0) |             \ -                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \ -                                     PIN_ODR_HIGH(GPIOA_PIN2) |           \ -                                     PIN_ODR_HIGH(GPIOA_PIN3) |           \ -                                     PIN_ODR_HIGH(GPIOA_PIN4) |           \ -                                     PIN_ODR_HIGH(GPIOA_PIN5) |            \ -                                     PIN_ODR_HIGH(GPIOA_PIN6) |           \ -                                     PIN_ODR_HIGH(GPIOA_PIN7) |           \ -                                     PIN_ODR_HIGH(GPIOA_PIN8) |           \ -                                     PIN_ODR_HIGH(GPIOA_PIN9) |           \ -                                     PIN_ODR_HIGH(GPIOA_PIN10) |           \ -                                     PIN_ODR_HIGH(GPIOA_PIN11) |           \ -                                     PIN_ODR_HIGH(GPIOA_PIN12) |           \ -                                     PIN_ODR_HIGH(GPIOA_PIN13) |            \ -                                     PIN_ODR_HIGH(GPIOA_PIN14) |            \ -                                     PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_PIN0, 0U) |          \ -                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \ -                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |        \ -                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |        \ -                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |        \ -                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |        \ -                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |        \ -                                     PIN_AFIO_AF(GPIOA_PIN7, 0U)) -#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |        \ -                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |        \ -                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |        \ -                                     PIN_AFIO_AF(GPIOA_PIN11, 0U) |        \ -                                     PIN_AFIO_AF(GPIOA_PIN12, 0U) |        \ -                                     PIN_AFIO_AF(GPIOA_PIN13, 0U) |         \ -                                     PIN_AFIO_AF(GPIOA_PIN14, 0U) |         \ -                                     PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0  - ROW2 - * PB1  - RGB_D - * PB2  - PIN2                      (input pullup). - * PB3  - COL12 - * PB4  - COL11 - * PB5  - COL10 - * PB6  - COL9 - * PB7  - COL8 - * PB8  - BOOT0 (set as output for STM32F042) - * PB9  - PIN9                      (input pullup). - * PB10 - PIN10                     (input pullup). - * PB11 - PIN11                     (input pullup). - * PB12 - PIN12                     (input pullup). - * PB13 - PIN13                     (input pullup). - * PB14 - PIN14                     (input pullup). - * PB15 - PIN15                     (input pullup). - */ -#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |         \ -                                     PIN_MODE_OUTPUT(GPIOB_PIN1) |         \ -                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \ -                                     PIN_MODE_INPUT(GPIOB_PIN3) |       \ -                                     PIN_MODE_INPUT(GPIOB_PIN4) |        \ -                                     PIN_MODE_INPUT(GPIOB_PIN5) |        \ -                                     PIN_MODE_INPUT(GPIOB_PIN6) |         \ -                                     PIN_MODE_INPUT(GPIOB_PIN7) |         \ -                                     PIN_MODE_OUTPUT(GPIOB_PIN8) |           \ -                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \ -                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \ -                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \ -                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \ -                                     PIN_MODE_INPUT(GPIOB_PIN13) |          \ -                                     PIN_MODE_INPUT(GPIOB_PIN14) |          \ -                                     PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |    \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |    \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |    \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN13) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN14) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |        \ -                                     PIN_OSPEED_HIGH(GPIOB_PIN1) |        \ -                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \ -                                     PIN_OSPEED_VERYLOW(GPIOB_PIN3) |       \ -                                     PIN_OSPEED_VERYLOW(GPIOB_PIN4) |       \ -                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \ -                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |        \ -                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |        \ -                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |          \ -                                     PIN_OSPEED_HIGH(GPIOB_PIN9) |          \ -                                     PIN_OSPEED_HIGH(GPIOB_PIN10) |         \ -                                     PIN_OSPEED_HIGH(GPIOB_PIN11) |         \ -                                     PIN_OSPEED_HIGH(GPIOB_PIN12) |         \ -                                     PIN_OSPEED_HIGH(GPIOB_PIN13) |         \ -                                     PIN_OSPEED_HIGH(GPIOB_PIN14) |         \ -                                     PIN_OSPEED_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |       \ -                                     PIN_PUPDR_FLOATING(GPIOB_PIN1) |       \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |    \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |      \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |      \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |       \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |       \ -                                     PIN_PUPDR_PULLDOWN(GPIOB_PIN8) |         \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN13) |        \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN14) |        \ -                                     PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |           \ -                                     PIN_ODR_HIGH(GPIOB_PIN1) |           \ -                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \ -                                     PIN_ODR_HIGH(GPIOB_PIN3) |           \ -                                     PIN_ODR_HIGH(GPIOB_PIN4) |          \ -                                     PIN_ODR_HIGH(GPIOB_PIN5) |          \ -                                     PIN_ODR_HIGH(GPIOB_PIN6) |           \ -                                     PIN_ODR_HIGH(GPIOB_PIN7) |           \ -                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \ -                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \ -                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \ -                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \ -                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \ -                                     PIN_ODR_HIGH(GPIOB_PIN13) |            \ -                                     PIN_ODR_HIGH(GPIOB_PIN14) |            \ -                                     PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |        \ -                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |        \ -                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \ -                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |       \ -                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |       \ -                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |       \ -                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |        \ -                                     PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \ -                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \ -                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \ -                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \ -                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \ -                                     PIN_AFIO_AF(GPIOB_PIN13, 0U) |         \ -                                     PIN_AFIO_AF(GPIOB_PIN14, 0U) |         \ -                                     PIN_AFIO_AF(GPIOB_PIN15, 0U)) - -/* - * GPIOC setup: - * - * PC0  - PIN0                      (input pullup). - * PC1  - PIN1                      (input pullup). - * PC2  - PIN2                      (input pullup). - * PC3  - PIN3                      (input pullup). - * PC4  - PIN4                      (input pullup). - * PC5  - PIN5                      (input pullup). - * PC6  - PIN6                      (input pullup). - * PC7  - PIN7                      (input pullup). - * PC8  - PIN8                      (input pullup). - * PC9  - PIN9                      (input pullup). - * PC10 - PIN10                     (input pullup). - * PC11 - PIN11                     (input pullup). - * PC12 - PIN12                     (input pullup). - * PC13 - PIN13                     (input pullup). - * PC14 - PIN14                     (input pullup). - * PC15 - PIN15                     (input pullup). - */ -#define VAL_GPIOC_MODER             (PIN_MODE_INPUT(GPIOC_PIN0) |           \ -                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \ -                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \ -                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \ -                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \ -                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \ -                                     PIN_MODE_INPUT(GPIOC_PIN6) |           \ -                                     PIN_MODE_INPUT(GPIOC_PIN7) |           \ -                                     PIN_MODE_INPUT(GPIOC_PIN8) |           \ -                                     PIN_MODE_INPUT(GPIOC_PIN9) |           \ -                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \ -                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \ -                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \ -                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \ -                                     PIN_MODE_INPUT(GPIOC_PIN14) |          \ -                                     PIN_MODE_INPUT(GPIOC_PIN15)) -#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN6) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN7) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN8) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN9) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN14) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) -#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_PIN0) |          \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN1) |          \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN2) |          \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN3) |          \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN4) |          \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN5) |          \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN6) |          \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN7) |          \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN8) |          \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN9) |          \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN10) |         \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN11) |         \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN12) |         \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN13) |         \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN14) |         \ -                                     PIN_OSPEED_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_PUPDR             (PIN_PUPDR_PULLUP(GPIOC_PIN0) |         \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN6) |         \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN7) |         \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN8) |         \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN9) |         \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN14) |        \ -                                     PIN_PUPDR_PULLUP(GPIOC_PIN15)) -#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_PIN0) |             \ -                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \ -                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \ -                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \ -                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \ -                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \ -                                     PIN_ODR_HIGH(GPIOC_PIN6) |             \ -                                     PIN_ODR_HIGH(GPIOC_PIN7) |             \ -                                     PIN_ODR_HIGH(GPIOC_PIN8) |             \ -                                     PIN_ODR_HIGH(GPIOC_PIN9) |             \ -                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \ -                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \ -                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \ -                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \ -                                     PIN_ODR_HIGH(GPIOC_PIN14) |            \ -                                     PIN_ODR_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_PIN0, 0U) |          \ -                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \ -                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \ -                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \ -                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \ -                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \ -                                     PIN_AFIO_AF(GPIOC_PIN6, 0U) |          \ -                                     PIN_AFIO_AF(GPIOC_PIN7, 0U)) -#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_PIN8, 0U) |          \ -                                     PIN_AFIO_AF(GPIOC_PIN9, 0U) |          \ -                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \ -                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \ -                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \ -                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \ -                                     PIN_AFIO_AF(GPIOC_PIN14, 0U) |         \ -                                     PIN_AFIO_AF(GPIOC_PIN15, 0U)) - -/* - * GPIOD setup: - * - * PD0  - PIN0                      (input pullup). - * PD1  - PIN1                      (input pullup). - * PD2  - PIN2                      (input pullup). - * PD3  - PIN3                      (input pullup). - * PD4  - PIN4                      (input pullup). - * PD5  - PIN5                      (input pullup). - * PD6  - PIN6                      (input pullup). - * PD7  - PIN7                      (input pullup). - * PD8  - PIN8                      (input pullup). - * PD9  - PIN9                      (input pullup). - * PD10 - PIN10                     (input pullup). - * PD11 - PIN11                     (input pullup). - * PD12 - PIN12                     (input pullup). - * PD13 - PIN13                     (input pullup). - * PD14 - PIN14                     (input pullup). - * PD15 - PIN15                     (input pullup). - */ -#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \ -                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \ -                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \ -                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \ -                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \ -                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \ -                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \ -                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \ -                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \ -                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \ -                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \ -                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \ -                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \ -                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \ -                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \ -                                     PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_HIGH(GPIOD_PIN0) |          \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN1) |          \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN2) |          \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN3) |          \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN4) |          \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN5) |          \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN6) |          \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN7) |          \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN8) |          \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN9) |          \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN10) |         \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN11) |         \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN12) |         \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN13) |         \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN14) |         \ -                                     PIN_OSPEED_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \ -                                     PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \ -                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \ -                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \ -                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \ -                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \ -                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \ -                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \ -                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \ -                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \ -                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \ -                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \ -                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \ -                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \ -                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \ -                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \ -                                     PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \ -                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \ -                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \ -                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \ -                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \ -                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \ -                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \ -                                     PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \ -                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \ -                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \ -                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \ -                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \ -                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \ -                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \ -                                     PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0  - PIN0                      (input pullup). - * PE1  - PIN1                      (input pullup). - * PE2  - PIN2                      (input pullup). - * PE3  - PIN3                      (input pullup). - * PE4  - PIN4                      (input pullup). - * PE5  - PIN5                      (input pullup). - * PE6  - PIN6                      (input pullup). - * PE7  - PIN7                      (input pullup). - * PE8  - PIN8                      (input pullup). - * PE9  - PIN9                      (input pullup). - * PE10 - PIN10                     (input pullup). - * PE11 - PIN11                     (input pullup). - * PE12 - PIN12                     (input pullup). - * PE13 - PIN13                     (input pullup). - * PE14 - PIN14                     (input pullup). - * PE15 - PIN15                     (input pullup). - */ -#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \ -                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \ -                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \ -                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \ -                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \ -                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \ -                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \ -                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \ -                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \ -                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \ -                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \ -                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \ -                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \ -                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \ -                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \ -                                     PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_HIGH(GPIOE_PIN0) |          \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN1) |          \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN2) |          \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN3) |          \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN4) |          \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN5) |          \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN6) |          \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN7) |          \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN8) |          \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN9) |          \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN10) |         \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN11) |         \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN12) |         \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN13) |         \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN14) |         \ -                                     PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \ -                                     PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \ -                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \ -                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \ -                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \ -                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \ -                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \ -                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \ -                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \ -                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \ -                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \ -                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \ -                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \ -                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \ -                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \ -                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \ -                                     PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \ -                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \ -                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \ -                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \ -                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \ -                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \ -                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \ -                                     PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \ -                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \ -                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \ -                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \ -                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \ -                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \ -                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \ -                                     PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0  - COL7 - * PF1  - COL6 - * PF2  - PIN2                      (input pullup). - * PF3  - PIN3                      (input pullup). - * PF4  - PIN4                      (input pullup). - * PF5  - PIN5                      (input pullup). - * PF6  - PIN6                      (input pullup). - * PF7  - PIN7                      (input pullup). - * PF8  - PIN8                      (input pullup). - * PF9  - PIN9                      (input pullup). - * PF10 - PIN10                     (input pullup). - * PF11 - PIN11                     (input pullup). - * PF12 - PIN12                     (input pullup). - * PF13 - PIN13                     (input pullup). - * PF14 - PIN14                     (input pullup). - * PF15 - PIN15                     (input pullup). - */ -#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_PIN0) |         \ -                                     PIN_MODE_INPUT(GPIOF_PIN1) |         \ -                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \ -                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \ -                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \ -                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \ -                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \ -                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \ -                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \ -                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \ -                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \ -                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \ -                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \ -                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \ -                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \ -                                     PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN1) |     \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \ -                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_PIN0) |        \ -                                     PIN_OSPEED_VERYLOW(GPIOF_PIN1) |        \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN2) |          \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN3) |          \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN4) |          \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN5) |          \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN6) |          \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN7) |          \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN8) |          \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN9) |          \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN10) |         \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN11) |         \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN12) |         \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN13) |         \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN14) |         \ -                                     PIN_OSPEED_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR             (PIN_PUPDR_PULLUP(GPIOF_PIN0) |       \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN1) |       \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \ -                                     PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_PIN0) |           \ -                                     PIN_ODR_HIGH(GPIOF_PIN1) |           \ -                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \ -                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \ -                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \ -                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \ -                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \ -                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \ -                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \ -                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \ -                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \ -                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \ -                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \ -                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \ -                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \ -                                     PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_PIN0, 0U) |        \ -                                     PIN_AFIO_AF(GPIOF_PIN1, 0U) |        \ -                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \ -                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \ -                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \ -                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \ -                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \ -                                     PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \ -                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \ -                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \ -                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \ -                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \ -                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \ -                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \ -                                     PIN_AFIO_AF(GPIOF_PIN15, 0U)) - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif -  void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H */ diff --git a/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.mk b/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.mk deleted file mode 100644 index bbeb5bbff7..0000000000 --- a/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F042X6/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F042X6 diff --git a/keyboards/vinta/bootloader_defs.h b/keyboards/vinta/bootloader_defs.h deleted file mode 100644 index 4994be9c24..0000000000 --- a/keyboards/vinta/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC400
\ No newline at end of file diff --git a/lib/python/qmk/cli/cformat.py b/lib/python/qmk/cli/cformat.py index 600161c5c5..6bcd15a110 100644 --- a/lib/python/qmk/cli/cformat.py +++ b/lib/python/qmk/cli/cformat.py @@ -43,8 +43,8 @@ def cformat(cli):      # Empty array for files      files = []      # Core directories for formatting -    core_dirs = ['drivers', 'quantum', 'tests', 'tmk_core'] -    ignores = ['tmk_core/protocol/usb_hid', 'quantum/template'] +    core_dirs = ['drivers', 'quantum', 'tests', 'tmk_core', 'platforms'] +    ignores = ['tmk_core/protocol/usb_hid', 'quantum/template', 'platforms/chibios']      # Find the list of files to format      if cli.args.files:          files.extend(normpath(file) for file in cli.args.files) diff --git a/platforms/chibios/BLACKPILL_STM32_F401/board/board.mk b/platforms/chibios/BLACKPILL_STM32_F401/board/board.mk new file mode 100644 index 0000000000..fddf7dace4 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F401/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_STM32F401C_DISCOVERY/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_STM32F401C_DISCOVERY + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC  += $(BOARDINC) diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/board.h b/platforms/chibios/BLACKPILL_STM32_F401/configs/board.h new file mode 100644 index 0000000000..30af6b0c86 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F401/configs/board.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + *  This program is free software: you can redistribute it and/or modify + *  it under the terms of the GNU General Public License as published by + *  the Free Software Foundation, either version 3 of the License, or + *  (at your option) any later version. + * + *  This program is distributed in the hope that it will be useful, + *  but WITHOUT ANY WARRANTY; without even the implied warranty of + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *  GNU General Public License for more details. + * + *  You should have received a copy of the GNU General Public License + *  along with this program.  If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "board.h" + +#undef STM32_HSE_BYPASS diff --git a/keyboards/handwired/onekey/blackpill_f401/chconf.h b/platforms/chibios/BLACKPILL_STM32_F401/configs/chconf.h index 7dc4f84a8a..7dc4f84a8a 100644 --- a/keyboards/handwired/onekey/blackpill_f401/chconf.h +++ b/platforms/chibios/BLACKPILL_STM32_F401/configs/chconf.h diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/config.h b/platforms/chibios/BLACKPILL_STM32_F401/configs/config.h new file mode 100644 index 0000000000..eb73e72ef2 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F401/configs/config.h @@ -0,0 +1,23 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + *  This program is free software: you can redistribute it and/or modify + *  it under the terms of the GNU General Public License as published by + *  the Free Software Foundation, either version 3 of the License, or + *  (at your option) any later version. + * + *  This program is distributed in the hope that it will be useful, + *  but WITHOUT ANY WARRANTY; without even the implied warranty of + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *  GNU General Public License for more details. + * + *  You should have received a copy of the GNU General Public License + *  along with this program.  If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#define BOARD_OTG_NOVBUSSENS 1 + +#define STM32_LSECLK 32768U +#define STM32_HSECLK 25000000U + +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/halconf.h b/platforms/chibios/BLACKPILL_STM32_F401/configs/halconf.h new file mode 100644 index 0000000000..a8db392aaa --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F401/configs/halconf.h @@ -0,0 +1,525 @@ +/* +    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + +    Licensed under the Apache License, Version 2.0 (the "License"); +    you may not use this file except in compliance with the License. +    You may obtain a copy of the License at + +        http://www.apache.org/licenses/LICENSE-2.0 + +    Unless required by applicable law or agreed to in writing, software +    distributed under the License is distributed on an "AS IS" BASIS, +    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +    See the License for the specific language governing permissions and +    limitations under the License. +*/ + +/** + * @file    templates/halconf.h + * @brief   HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + *          various device drivers from your application. You may also use + *          this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief   Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL                         TRUE +#endif + +/** + * @brief   Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC                         FALSE +#endif + +/** + * @brief   Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN                         FALSE +#endif + +/** + * @brief   Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY                         FALSE +#endif + +/** + * @brief   Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC                         FALSE +#endif + +/** + * @brief   Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT                         FALSE +#endif + +/** + * @brief   Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C                         FALSE +#endif + +/** + * @brief   Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S                         FALSE +#endif + +/** + * @brief   Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU                         FALSE +#endif + +/** + * @brief   Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC                         FALSE +#endif + +/** + * @brief   Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI                     FALSE +#endif + +/** + * @brief   Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM                         FALSE +#endif + +/** + * @brief   Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC                         FALSE +#endif + +/** + * @brief   Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC                         FALSE +#endif + +/** + * @brief   Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL                      FALSE +#endif + +/** + * @brief   Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB                  FALSE +#endif + +/** + * @brief   Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO                         FALSE +#endif + +/** + * @brief   Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI                         FALSE +#endif + +/** + * @brief   Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG                        FALSE +#endif + +/** + * @brief   Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART                        FALSE +#endif + +/** + * @brief   Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB                         TRUE +#endif + +/** + * @brief   Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG                         FALSE +#endif + +/** + * @brief   Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI                        FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS                   FALSE +#endif + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT                        FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT                        TRUE +#endif + +/** + * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION            TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE                  TRUE +#endif + +/** + * @brief   Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS           FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + *          implementation for algorithms not supported by the underlying + *          hardware. + * @note    Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK                FALSE +#endif + +/** + * @brief   Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK            FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT                        TRUE +#endif + +/** + * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION            TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION            TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY                   FALSE +#endif + +/** + * @brief   Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS                      TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings.                                          */ +/*===========================================================================*/ + +/** + * @brief   Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + *          routines releasing some extra CPU time for the threads with + *          lower priority, this may slow down the driver a bit however. + *          This option is recommended also if the SPI driver does not + *          use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING                    TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Number of initialization attempts before rejecting the card. + * @note    Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY                      100 +#endif + +/** + * @brief   Include support for MMC cards. + * @note    MMC support is not yet implemented so this option must be kept + *          at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT                     FALSE +#endif + +/** + * @brief   Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + *          routines releasing some extra CPU time for the threads with + *          lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING                    TRUE +#endif + +/** + * @brief   OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20                    0x50FF8000U +#endif + +/** + * @brief   OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR                        0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings.                                           */ +/*===========================================================================*/ + +/** + * @brief   Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + *          default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE              38400 +#endif + +/** + * @brief   Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + *          buffers depending on the requirements of your application. + * @note    The default is 16 bytes for both the transmission and receive + *          buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE                 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting.                                        */ +/*===========================================================================*/ + +/** + * @brief   Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + *          the USB data endpoint maximum packet size. + * @note    The default is 256 bytes for both the transmission and receive + *          buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE             256 +#endif + +/** + * @brief   Serial over USB number of buffers. + * @note    The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER           2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT                        TRUE +#endif + +/** + * @brief   Enables circular transfers APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR                    FALSE +#endif + + +/** + * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION            TRUE +#endif + +/** + * @brief   Handling method for SPI CS line. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings.                                             */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT                       FALSE +#endif + +/** + * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION           FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT                        TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings.                                             */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT                       TRUE +#endif + +/** + * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION           TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h b/platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h new file mode 100644 index 0000000000..ba6e934fe7 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h @@ -0,0 +1,253 @@ +/* +    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + +    Licensed under the Apache License, Version 2.0 (the "License"); +    you may not use this file except in compliance with the License. +    You may obtain a copy of the License at + +        http://www.apache.org/licenses/LICENSE-2.0 + +    Unless required by applicable law or agreed to in writing, software +    distributed under the License is distributed on an "AS IS" BASIS, +    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +    See the License for the specific language governing permissions and +    limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0       Lowest...Highest. + * + * DMA priorities: + * 0...3        Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT                       FALSE +#define STM32_HSI_ENABLED                   TRUE +#define STM32_LSI_ENABLED                   TRUE +#define STM32_HSE_ENABLED                   TRUE +#define STM32_LSE_ENABLED                   FALSE +#define STM32_CLOCK48_REQUIRED              TRUE +#define STM32_SW                            STM32_SW_PLL +#define STM32_PLLSRC                        STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE                    25        +#define STM32_PLLN_VALUE                    336      +#define STM32_PLLP_VALUE                    4        +#define STM32_PLLQ_VALUE                    7        +#define STM32_HPRE                          STM32_HPRE_DIV1   +#define STM32_PPRE1                         STM32_PPRE1_DIV4   +#define STM32_PPRE2                         STM32_PPRE2_DIV2  +#define STM32_RTCSEL                        STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE                  8 +#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI +#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC                        STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE                 192 +#define STM32_PLLI2SR_VALUE                 5 +#define STM32_PVD_ENABLE                    FALSE +#define STM32_PLS                           STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE                 FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY            6 +#define STM32_IRQ_EXTI1_PRIORITY            6 +#define STM32_IRQ_EXTI2_PRIORITY            6 +#define STM32_IRQ_EXTI3_PRIORITY            6 +#define STM32_IRQ_EXTI4_PRIORITY            6 +#define STM32_IRQ_EXTI5_9_PRIORITY          6 +#define STM32_IRQ_EXTI10_15_PRIORITY        6 +#define STM32_IRQ_EXTI16_PRIORITY           6 +#define STM32_IRQ_EXTI17_PRIORITY           15 +#define STM32_IRQ_EXTI18_PRIORITY           6 +#define STM32_IRQ_EXTI19_PRIORITY           6 +#define STM32_IRQ_EXTI20_PRIORITY           6 +#define STM32_IRQ_EXTI21_PRIORITY           15 +#define STM32_IRQ_EXTI22_PRIORITY           15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1                  FALSE +#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC1_DMA_PRIORITY         2 +#define STM32_ADC_IRQ_PRIORITY              6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1                  FALSE +#define STM32_GPT_USE_TIM2                  FALSE +#define STM32_GPT_USE_TIM3                  FALSE +#define STM32_GPT_USE_TIM4                  FALSE +#define STM32_GPT_USE_TIM5                  FALSE +#define STM32_GPT_USE_TIM9                  FALSE +#define STM32_GPT_USE_TIM11                 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY         7 +#define STM32_GPT_TIM2_IRQ_PRIORITY         7 +#define STM32_GPT_TIM3_IRQ_PRIORITY         7 +#define STM32_GPT_TIM4_IRQ_PRIORITY         7 +#define STM32_GPT_TIM5_IRQ_PRIORITY         7 +#define STM32_GPT_TIM9_IRQ_PRIORITY         7 +#define STM32_GPT_TIM11_IRQ_PRIORITY        7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1                  FALSE +#define STM32_I2C_USE_I2C2                  FALSE +#define STM32_I2C_USE_I2C3                  FALSE +#define STM32_I2C_BUSY_TIMEOUT              50 +#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY         5 +#define STM32_I2C_I2C2_IRQ_PRIORITY         5 +#define STM32_I2C_I2C3_IRQ_PRIORITY         5 +#define STM32_I2C_I2C1_DMA_PRIORITY         3 +#define STM32_I2C_I2C2_DMA_PRIORITY         3 +#define STM32_I2C_I2C3_DMA_PRIORITY         3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2                  FALSE +#define STM32_I2S_USE_SPI3                  FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY         10 +#define STM32_I2S_SPI3_IRQ_PRIORITY         10 +#define STM32_I2S_SPI2_DMA_PRIORITY         1 +#define STM32_I2S_SPI3_DMA_PRIORITY         1 +#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1                  FALSE +#define STM32_ICU_USE_TIM2                  FALSE +#define STM32_ICU_USE_TIM3                  FALSE +#define STM32_ICU_USE_TIM4                  FALSE +#define STM32_ICU_USE_TIM5                  FALSE +#define STM32_ICU_USE_TIM9                  FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY         7 +#define STM32_ICU_TIM2_IRQ_PRIORITY         7 +#define STM32_ICU_TIM3_IRQ_PRIORITY         7 +#define STM32_ICU_TIM4_IRQ_PRIORITY         7 +#define STM32_ICU_TIM5_IRQ_PRIORITY         7 +#define STM32_ICU_TIM9_IRQ_PRIORITY         7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED              FALSE +#define STM32_PWM_USE_TIM1                  FALSE +#define STM32_PWM_USE_TIM2                  FALSE +#define STM32_PWM_USE_TIM3                  FALSE +#define STM32_PWM_USE_TIM4                  FALSE +#define STM32_PWM_USE_TIM5                  FALSE +#define STM32_PWM_USE_TIM9                  FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY         7 +#define STM32_PWM_TIM2_IRQ_PRIORITY         7 +#define STM32_PWM_TIM3_IRQ_PRIORITY         7 +#define STM32_PWM_TIM4_IRQ_PRIORITY         7 +#define STM32_PWM_TIM5_IRQ_PRIORITY         7 +#define STM32_PWM_TIM9_IRQ_PRIORITY         7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1             FALSE +#define STM32_SERIAL_USE_USART2             FALSE +#define STM32_SERIAL_USE_USART6             FALSE +#define STM32_SERIAL_USART1_PRIORITY        12 +#define STM32_SERIAL_USART2_PRIORITY        12 +#define STM32_SERIAL_USART6_PRIORITY        12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1                  FALSE +#define STM32_SPI_USE_SPI2                  FALSE +#define STM32_SPI_USE_SPI3                  FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY         1 +#define STM32_SPI_SPI2_DMA_PRIORITY         1 +#define STM32_SPI_SPI3_DMA_PRIORITY         1 +#define STM32_SPI_SPI1_IRQ_PRIORITY         10 +#define STM32_SPI_SPI2_IRQ_PRIORITY         10 +#define STM32_SPI_SPI3_IRQ_PRIORITY         10 +#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY               8 +#define STM32_ST_USE_TIMER                  2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1               FALSE +#define STM32_UART_USE_USART2               FALSE +#define STM32_UART_USE_USART6               FALSE +#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY      12 +#define STM32_UART_USART2_IRQ_PRIORITY      12 +#define STM32_UART_USART6_IRQ_PRIORITY      12 +#define STM32_UART_USART1_DMA_PRIORITY      0 +#define STM32_UART_USART2_DMA_PRIORITY      0 +#define STM32_UART_USART6_DMA_PRIORITY      0 +#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1                  TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY         14 +#define STM32_USB_OTG1_RX_FIFO_SIZE         512 +#define STM32_USB_OTG_THREAD_PRIO           NORMALPRIO+1 +#define STM32_USB_OTG_THREAD_STACK_SIZE     128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI      0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG                  FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/BLACKPILL_STM32_F411/board/board.mk b/platforms/chibios/BLACKPILL_STM32_F411/board/board.mk new file mode 100644 index 0000000000..bb00b1a2b0 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC  += $(BOARDINC) diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/board.h b/platforms/chibios/BLACKPILL_STM32_F411/configs/board.h new file mode 100644 index 0000000000..30af6b0c86 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/configs/board.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + *  This program is free software: you can redistribute it and/or modify + *  it under the terms of the GNU General Public License as published by + *  the Free Software Foundation, either version 3 of the License, or + *  (at your option) any later version. + * + *  This program is distributed in the hope that it will be useful, + *  but WITHOUT ANY WARRANTY; without even the implied warranty of + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *  GNU General Public License for more details. + * + *  You should have received a copy of the GNU General Public License + *  along with this program.  If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "board.h" + +#undef STM32_HSE_BYPASS diff --git a/keyboards/handwired/onekey/blackpill_f411/chconf.h b/platforms/chibios/BLACKPILL_STM32_F411/configs/chconf.h index 7dc4f84a8a..7dc4f84a8a 100644 --- a/keyboards/handwired/onekey/blackpill_f411/chconf.h +++ b/platforms/chibios/BLACKPILL_STM32_F411/configs/chconf.h diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/config.h b/platforms/chibios/BLACKPILL_STM32_F411/configs/config.h new file mode 100644 index 0000000000..eb73e72ef2 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/configs/config.h @@ -0,0 +1,23 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + *  This program is free software: you can redistribute it and/or modify + *  it under the terms of the GNU General Public License as published by + *  the Free Software Foundation, either version 3 of the License, or + *  (at your option) any later version. + * + *  This program is distributed in the hope that it will be useful, + *  but WITHOUT ANY WARRANTY; without even the implied warranty of + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *  GNU General Public License for more details. + * + *  You should have received a copy of the GNU General Public License + *  along with this program.  If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#define BOARD_OTG_NOVBUSSENS 1 + +#define STM32_LSECLK 32768U +#define STM32_HSECLK 25000000U + +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h b/platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h new file mode 100644 index 0000000000..a8db392aaa --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h @@ -0,0 +1,525 @@ +/* +    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + +    Licensed under the Apache License, Version 2.0 (the "License"); +    you may not use this file except in compliance with the License. +    You may obtain a copy of the License at + +        http://www.apache.org/licenses/LICENSE-2.0 + +    Unless required by applicable law or agreed to in writing, software +    distributed under the License is distributed on an "AS IS" BASIS, +    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +    See the License for the specific language governing permissions and +    limitations under the License. +*/ + +/** + * @file    templates/halconf.h + * @brief   HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + *          various device drivers from your application. You may also use + *          this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief   Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL                         TRUE +#endif + +/** + * @brief   Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC                         FALSE +#endif + +/** + * @brief   Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN                         FALSE +#endif + +/** + * @brief   Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY                         FALSE +#endif + +/** + * @brief   Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC                         FALSE +#endif + +/** + * @brief   Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT                         FALSE +#endif + +/** + * @brief   Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C                         FALSE +#endif + +/** + * @brief   Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S                         FALSE +#endif + +/** + * @brief   Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU                         FALSE +#endif + +/** + * @brief   Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC                         FALSE +#endif + +/** + * @brief   Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI                     FALSE +#endif + +/** + * @brief   Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM                         FALSE +#endif + +/** + * @brief   Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC                         FALSE +#endif + +/** + * @brief   Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC                         FALSE +#endif + +/** + * @brief   Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL                      FALSE +#endif + +/** + * @brief   Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB                  FALSE +#endif + +/** + * @brief   Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO                         FALSE +#endif + +/** + * @brief   Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI                         FALSE +#endif + +/** + * @brief   Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG                        FALSE +#endif + +/** + * @brief   Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART                        FALSE +#endif + +/** + * @brief   Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB                         TRUE +#endif + +/** + * @brief   Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG                         FALSE +#endif + +/** + * @brief   Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI                        FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS                   FALSE +#endif + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT                        FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT                        TRUE +#endif + +/** + * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION            TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE                  TRUE +#endif + +/** + * @brief   Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS           FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + *          implementation for algorithms not supported by the underlying + *          hardware. + * @note    Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK                FALSE +#endif + +/** + * @brief   Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK            FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT                        TRUE +#endif + +/** + * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION            TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION            TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY                   FALSE +#endif + +/** + * @brief   Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS                      TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings.                                          */ +/*===========================================================================*/ + +/** + * @brief   Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + *          routines releasing some extra CPU time for the threads with + *          lower priority, this may slow down the driver a bit however. + *          This option is recommended also if the SPI driver does not + *          use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING                    TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Number of initialization attempts before rejecting the card. + * @note    Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY                      100 +#endif + +/** + * @brief   Include support for MMC cards. + * @note    MMC support is not yet implemented so this option must be kept + *          at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT                     FALSE +#endif + +/** + * @brief   Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + *          routines releasing some extra CPU time for the threads with + *          lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING                    TRUE +#endif + +/** + * @brief   OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20                    0x50FF8000U +#endif + +/** + * @brief   OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR                        0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings.                                           */ +/*===========================================================================*/ + +/** + * @brief   Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + *          default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE              38400 +#endif + +/** + * @brief   Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + *          buffers depending on the requirements of your application. + * @note    The default is 16 bytes for both the transmission and receive + *          buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE                 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting.                                        */ +/*===========================================================================*/ + +/** + * @brief   Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + *          the USB data endpoint maximum packet size. + * @note    The default is 256 bytes for both the transmission and receive + *          buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE             256 +#endif + +/** + * @brief   Serial over USB number of buffers. + * @note    The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER           2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT                        TRUE +#endif + +/** + * @brief   Enables circular transfers APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR                    FALSE +#endif + + +/** + * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION            TRUE +#endif + +/** + * @brief   Handling method for SPI CS line. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings.                                             */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT                       FALSE +#endif + +/** + * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION           FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings.                                              */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT                        TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings.                                             */ +/*===========================================================================*/ + +/** + * @brief   Enables synchronous APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT                       TRUE +#endif + +/** + * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note    Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION           TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h b/platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h new file mode 100644 index 0000000000..0394ff56bb --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h @@ -0,0 +1,253 @@ +/* +    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + +    Licensed under the Apache License, Version 2.0 (the "License"); +    you may not use this file except in compliance with the License. +    You may obtain a copy of the License at + +        http://www.apache.org/licenses/LICENSE-2.0 + +    Unless required by applicable law or agreed to in writing, software +    distributed under the License is distributed on an "AS IS" BASIS, +    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +    See the License for the specific language governing permissions and +    limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0       Lowest...Highest. + * + * DMA priorities: + * 0...3        Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT                       FALSE +#define STM32_HSI_ENABLED                   TRUE +#define STM32_LSI_ENABLED                   TRUE +#define STM32_HSE_ENABLED                   TRUE +#define STM32_LSE_ENABLED                   FALSE +#define STM32_CLOCK48_REQUIRED              TRUE +#define STM32_SW                            STM32_SW_PLL +#define STM32_PLLSRC                        STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE                    25 +#define STM32_PLLN_VALUE                    384 +#define STM32_PLLP_VALUE                    4 +#define STM32_PLLQ_VALUE                    8 +#define STM32_HPRE                          STM32_HPRE_DIV1 +#define STM32_PPRE1                         STM32_PPRE1_DIV4 +#define STM32_PPRE2                         STM32_PPRE2_DIV2 +#define STM32_RTCSEL                        STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE                  8 +#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI +#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC                        STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE                 192 +#define STM32_PLLI2SR_VALUE                 5 +#define STM32_PVD_ENABLE                    FALSE +#define STM32_PLS                           STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE                 FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY            6 +#define STM32_IRQ_EXTI1_PRIORITY            6 +#define STM32_IRQ_EXTI2_PRIORITY            6 +#define STM32_IRQ_EXTI3_PRIORITY            6 +#define STM32_IRQ_EXTI4_PRIORITY            6 +#define STM32_IRQ_EXTI5_9_PRIORITY          6 +#define STM32_IRQ_EXTI10_15_PRIORITY        6 +#define STM32_IRQ_EXTI16_PRIORITY           6 +#define STM32_IRQ_EXTI17_PRIORITY           15 +#define STM32_IRQ_EXTI18_PRIORITY           6 +#define STM32_IRQ_EXTI19_PRIORITY           6 +#define STM32_IRQ_EXTI20_PRIORITY           6 +#define STM32_IRQ_EXTI21_PRIORITY           15 +#define STM32_IRQ_EXTI22_PRIORITY           15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1                  FALSE +#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC1_DMA_PRIORITY         2 +#define STM32_ADC_IRQ_PRIORITY              6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1                  FALSE +#define STM32_GPT_USE_TIM2                  FALSE +#define STM32_GPT_USE_TIM3                  FALSE +#define STM32_GPT_USE_TIM4                  FALSE +#define STM32_GPT_USE_TIM5                  FALSE +#define STM32_GPT_USE_TIM9                  FALSE +#define STM32_GPT_USE_TIM11                 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY         7 +#define STM32_GPT_TIM2_IRQ_PRIORITY         7 +#define STM32_GPT_TIM3_IRQ_PRIORITY         7 +#define STM32_GPT_TIM4_IRQ_PRIORITY         7 +#define STM32_GPT_TIM5_IRQ_PRIORITY         7 +#define STM32_GPT_TIM9_IRQ_PRIORITY         7 +#define STM32_GPT_TIM11_IRQ_PRIORITY        7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1                  FALSE +#define STM32_I2C_USE_I2C2                  FALSE +#define STM32_I2C_USE_I2C3                  FALSE +#define STM32_I2C_BUSY_TIMEOUT              50 +#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY         5 +#define STM32_I2C_I2C2_IRQ_PRIORITY         5 +#define STM32_I2C_I2C3_IRQ_PRIORITY         5 +#define STM32_I2C_I2C1_DMA_PRIORITY         3 +#define STM32_I2C_I2C2_DMA_PRIORITY         3 +#define STM32_I2C_I2C3_DMA_PRIORITY         3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2                  FALSE +#define STM32_I2S_USE_SPI3                  FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY         10 +#define STM32_I2S_SPI3_IRQ_PRIORITY         10 +#define STM32_I2S_SPI2_DMA_PRIORITY         1 +#define STM32_I2S_SPI3_DMA_PRIORITY         1 +#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1                  FALSE +#define STM32_ICU_USE_TIM2                  FALSE +#define STM32_ICU_USE_TIM3                  FALSE +#define STM32_ICU_USE_TIM4                  FALSE +#define STM32_ICU_USE_TIM5                  FALSE +#define STM32_ICU_USE_TIM9                  FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY         7 +#define STM32_ICU_TIM2_IRQ_PRIORITY         7 +#define STM32_ICU_TIM3_IRQ_PRIORITY         7 +#define STM32_ICU_TIM4_IRQ_PRIORITY         7 +#define STM32_ICU_TIM5_IRQ_PRIORITY         7 +#define STM32_ICU_TIM9_IRQ_PRIORITY         7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED              FALSE +#define STM32_PWM_USE_TIM1                  FALSE +#define STM32_PWM_USE_TIM2                  FALSE +#define STM32_PWM_USE_TIM3                  FALSE +#define STM32_PWM_USE_TIM4                  FALSE +#define STM32_PWM_USE_TIM5                  FALSE +#define STM32_PWM_USE_TIM9                  FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY         7 +#define STM32_PWM_TIM2_IRQ_PRIORITY         7 +#define STM32_PWM_TIM3_IRQ_PRIORITY         7 +#define STM32_PWM_TIM4_IRQ_PRIORITY         7 +#define STM32_PWM_TIM5_IRQ_PRIORITY         7 +#define STM32_PWM_TIM9_IRQ_PRIORITY         7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1             FALSE +#define STM32_SERIAL_USE_USART2             FALSE +#define STM32_SERIAL_USE_USART6             FALSE +#define STM32_SERIAL_USART1_PRIORITY        12 +#define STM32_SERIAL_USART2_PRIORITY        12 +#define STM32_SERIAL_USART6_PRIORITY        12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1                  FALSE +#define STM32_SPI_USE_SPI2                  FALSE +#define STM32_SPI_USE_SPI3                  FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY         1 +#define STM32_SPI_SPI2_DMA_PRIORITY         1 +#define STM32_SPI_SPI3_DMA_PRIORITY         1 +#define STM32_SPI_SPI1_IRQ_PRIORITY         10 +#define STM32_SPI_SPI2_IRQ_PRIORITY         10 +#define STM32_SPI_SPI3_IRQ_PRIORITY         10 +#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY               8 +#define STM32_ST_USE_TIMER                  2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1               FALSE +#define STM32_UART_USE_USART2               FALSE +#define STM32_UART_USE_USART6               FALSE +#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY      12 +#define STM32_UART_USART2_IRQ_PRIORITY      12 +#define STM32_UART_USART6_IRQ_PRIORITY      12 +#define STM32_UART_USART1_DMA_PRIORITY      0 +#define STM32_UART_USART2_DMA_PRIORITY      0 +#define STM32_UART_USART6_DMA_PRIORITY      0 +#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1                  TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY         14 +#define STM32_USB_OTG1_RX_FIFO_SIZE         512 +#define STM32_USB_OTG_THREAD_PRIO           NORMALPRIO+1 +#define STM32_USB_OTG_THREAD_STACK_SIZE     128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI      0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG                  FALSE + +#endif /* MCUCONF_H */ diff --git a/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.c b/platforms/chibios/GENERIC_STM32_F042X6/board/board.c index 754dc5c4dd..7d93b68f9c 100644 --- a/keyboards/vinta/boards/GENERIC_STM32_F042X6/board.c +++ b/platforms/chibios/GENERIC_STM32_F042X6/board/board.c @@ -202,13 +202,14 @@ static void stm32_gpio_init(void) {  /* Driver exported functions.                                                */  /*===========================================================================*/ +__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} +  /**   * @brief   Early initialization code.   * @details GPIO ports and system clocks are initialized before everything   *          else.   */  void __early_init(void) { -  extern void enter_bootloader_mode_if_requested(void);    enter_bootloader_mode_if_requested();    stm32_gpio_init(); diff --git a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.h b/platforms/chibios/GENERIC_STM32_F042X6/board/board.h index ee9d31e04a..ee9d31e04a 100644 --- a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.h +++ b/platforms/chibios/GENERIC_STM32_F042X6/board/board.h diff --git a/drivers/boards/GENERIC_STM32_F072XB/board.mk b/platforms/chibios/GENERIC_STM32_F042X6/board/board.mk index bd6f878269..842e335905 100644 --- a/drivers/boards/GENERIC_STM32_F072XB/board.mk +++ b/platforms/chibios/GENERIC_STM32_F042X6/board/board.mk @@ -1,8 +1,8 @@  # List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F072XB/board.c +BOARDSRC = $(BOARD_PATH)/board/board.c  # Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F072XB +BOARDINC = $(BOARD_PATH)/board  # Shared variables  ALLCSRC += $(BOARDSRC) diff --git a/keyboards/peiorisboards/ixora/bootloader_defs.h b/platforms/chibios/GENERIC_STM32_F042X6/configs/bootloader_defs.h index 4994be9c24..4994be9c24 100644 --- a/keyboards/peiorisboards/ixora/bootloader_defs.h +++ b/platforms/chibios/GENERIC_STM32_F042X6/configs/bootloader_defs.h diff --git a/drivers/boards/GENERIC_STM32_F072XB/board.c b/platforms/chibios/GENERIC_STM32_F072XB/board/board.c index c91136e8f6..c91136e8f6 100644 --- a/drivers/boards/GENERIC_STM32_F072XB/board.c +++ b/platforms/chibios/GENERIC_STM32_F072XB/board/board.c diff --git a/drivers/boards/GENERIC_STM32_F072XB/board.h b/platforms/chibios/GENERIC_STM32_F072XB/board/board.h index 87570e62d2..87570e62d2 100644 --- a/drivers/boards/GENERIC_STM32_F072XB/board.h +++ b/platforms/chibios/GENERIC_STM32_F072XB/board/board.h diff --git a/drivers/boards/BLACKPILL_STM32_F411/board.mk b/platforms/chibios/GENERIC_STM32_F072XB/board/board.mk index 93c1e62f5d..842e335905 100644 --- a/drivers/boards/BLACKPILL_STM32_F411/board.mk +++ b/platforms/chibios/GENERIC_STM32_F072XB/board/board.mk @@ -1,8 +1,8 @@  # List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F411/board.c +BOARDSRC = $(BOARD_PATH)/board/board.c  # Required include directories -BOARDINC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F411 +BOARDINC = $(BOARD_PATH)/board  # Shared variables  ALLCSRC += $(BOARDSRC) diff --git a/drivers/boards/GENERIC_STM32_F072XB/bootloader_defs.h b/platforms/chibios/GENERIC_STM32_F072XB/configs/bootloader_defs.h index 02c48c4e6d..02c48c4e6d 100644 --- a/drivers/boards/GENERIC_STM32_F072XB/bootloader_defs.h +++ b/platforms/chibios/GENERIC_STM32_F072XB/configs/bootloader_defs.h diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.c b/platforms/chibios/GENERIC_STM32_F303XC/board/board.c index 9b0fc1b6b9..4722acd648 100644 --- a/drivers/boards/GENERIC_STM32_F303XC/board.c +++ b/platforms/chibios/GENERIC_STM32_F303XC/board/board.c @@ -181,7 +181,7 @@ static void stm32_gpio_init(void) {  #endif  } -void enter_bootloader_mode_if_requested(void); +__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {}  /**   * @brief   Early initialization code. diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.h b/platforms/chibios/GENERIC_STM32_F303XC/board/board.h index 3579c82770..3579c82770 100644 --- a/drivers/boards/GENERIC_STM32_F303XC/board.h +++ b/platforms/chibios/GENERIC_STM32_F303XC/board/board.h diff --git a/drivers/boards/BLACKPILL_STM32_F401/board.mk b/platforms/chibios/GENERIC_STM32_F303XC/board/board.mk index 33473ed6b1..842e335905 100644 --- a/drivers/boards/BLACKPILL_STM32_F401/board.mk +++ b/platforms/chibios/GENERIC_STM32_F303XC/board/board.mk @@ -1,8 +1,8 @@  # List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F401/board.c +BOARDSRC = $(BOARD_PATH)/board/board.c  # Required include directories -BOARDINC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F401 +BOARDINC = $(BOARD_PATH)/board  # Shared variables  ALLCSRC += $(BOARDSRC) diff --git a/drivers/boards/GENERIC_STM32_F303XC/bootloader_defs.h b/platforms/chibios/GENERIC_STM32_F303XC/configs/bootloader_defs.h index 3b0e9d20a6..3b0e9d20a6 100644 --- a/drivers/boards/GENERIC_STM32_F303XC/bootloader_defs.h +++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/bootloader_defs.h diff --git a/quantum/stm32/chconf.h b/platforms/chibios/GENERIC_STM32_F303XC/configs/chconf.h index b6e66f9e49..aac3303705 100644 --- a/quantum/stm32/chconf.h +++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/chconf.h @@ -26,10 +26,10 @@   */  #ifndef CHCONF_H -#    define CHCONF_H +#define CHCONF_H -#    define _CHIBIOS_RT_CONF_ -#    define _CHIBIOS_RT_CONF_VER_6_0_ +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_  /*===========================================================================*/  /** @@ -42,34 +42,34 @@   * @brief   System time counter resolution.   * @note    Allowed values are 16 or 32 bits.   */ -#    if !defined(CH_CFG_ST_RESOLUTION) -#        define CH_CFG_ST_RESOLUTION 32 -#    endif +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION                32 +#endif  /**   * @brief   System tick frequency.   * @details Frequency of the system timer that drives the system ticks. This   *          setting also defines the system tick time unit.   */ -#    if !defined(CH_CFG_ST_FREQUENCY) -#        define CH_CFG_ST_FREQUENCY 100000 -#    endif +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY                 100000 +#endif  /**   * @brief   Time intervals data size.   * @note    Allowed values are 16, 32 or 64 bits.   */ -#    if !defined(CH_CFG_INTERVALS_SIZE) -#        define CH_CFG_INTERVALS_SIZE 32 -#    endif +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE               32 +#endif  /**   * @brief   Time types data size.   * @note    Allowed values are 16 or 32 bits.   */ -#    if !defined(CH_CFG_TIME_TYPES_SIZE) -#        define CH_CFG_TIME_TYPES_SIZE 32 -#    endif +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE              32 +#endif  /**   * @brief   Time delta constant for the tick-less mode. @@ -79,9 +79,9 @@   *          The value one is not valid, timeouts are rounded up to   *          this value.   */ -#    if !defined(CH_CFG_ST_TIMEDELTA) -#        define CH_CFG_ST_TIMEDELTA 2 -#    endif +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA                 2 +#endif  /** @} */ @@ -104,9 +104,9 @@   * @note    The round robin preemption is not supported in tickless mode and   *          must be set to zero in that case.   */ -#    if !defined(CH_CFG_TIME_QUANTUM) -#        define CH_CFG_TIME_QUANTUM 0 -#    endif +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM                 0 +#endif  /**   * @brief   Managed RAM size. @@ -119,9 +119,9 @@   *          provide the @p __heap_base__ and @p __heap_end__ symbols.   * @note    Requires @p CH_CFG_USE_MEMCORE.   */ -#    if !defined(CH_CFG_MEMCORE_SIZE) -#        define CH_CFG_MEMCORE_SIZE 0 -#    endif +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE                 0 +#endif  /**   * @brief   Idle thread automatic spawn suppression. @@ -130,9 +130,9 @@   *          function becomes the idle thread and must implement an   *          infinite loop.   */ -#    if !defined(CH_CFG_NO_IDLE_THREAD) -#        define CH_CFG_NO_IDLE_THREAD FALSE -#    endif +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD               FALSE +#endif  /** @} */ @@ -151,9 +151,9 @@   * @note    This is not related to the compiler optimization options.   * @note    The default is @p TRUE.   */ -#    if !defined(CH_CFG_OPTIMIZE_SPEED) -#        define CH_CFG_OPTIMIZE_SPEED TRUE -#    endif +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED               TRUE +#endif  /** @} */ @@ -171,9 +171,9 @@   *   * @note    The default is @p TRUE.   */ -#    if !defined(CH_CFG_USE_TM) -#        define CH_CFG_USE_TM TRUE -#    endif +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM                       TRUE +#endif  /**   * @brief   Threads registry APIs. @@ -181,9 +181,9 @@   *   * @note    The default is @p TRUE.   */ -#    if !defined(CH_CFG_USE_REGISTRY) -#        define CH_CFG_USE_REGISTRY TRUE -#    endif +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY                 TRUE +#endif  /**   * @brief   Threads synchronization APIs. @@ -192,9 +192,9 @@   *   * @note    The default is @p TRUE.   */ -#    if !defined(CH_CFG_USE_WAITEXIT) -#        define CH_CFG_USE_WAITEXIT TRUE -#    endif +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT                 TRUE +#endif  /**   * @brief   Semaphores APIs. @@ -202,9 +202,9 @@   *   * @note    The default is @p TRUE.   */ -#    if !defined(CH_CFG_USE_SEMAPHORES) -#        define CH_CFG_USE_SEMAPHORES TRUE -#    endif +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES               TRUE +#endif  /**   * @brief   Semaphores queuing mode. @@ -215,9 +215,9 @@   *          requirements.   * @note    Requires @p CH_CFG_USE_SEMAPHORES.   */ -#    if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#        define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#    endif +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE +#endif  /**   * @brief   Mutexes APIs. @@ -225,9 +225,9 @@   *   * @note    The default is @p TRUE.   */ -#    if !defined(CH_CFG_USE_MUTEXES) -#        define CH_CFG_USE_MUTEXES TRUE -#    endif +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES                  TRUE +#endif  /**   * @brief   Enables recursive behavior on mutexes. @@ -237,9 +237,9 @@   * @note    The default is @p FALSE.   * @note    Requires @p CH_CFG_USE_MUTEXES.   */ -#    if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#        define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#    endif +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE +#endif  /**   * @brief   Conditional Variables APIs. @@ -249,9 +249,9 @@   * @note    The default is @p TRUE.   * @note    Requires @p CH_CFG_USE_MUTEXES.   */ -#    if !defined(CH_CFG_USE_CONDVARS) -#        define CH_CFG_USE_CONDVARS TRUE -#    endif +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS                 TRUE +#endif  /**   * @brief   Conditional Variables APIs with timeout. @@ -261,9 +261,9 @@   * @note    The default is @p TRUE.   * @note    Requires @p CH_CFG_USE_CONDVARS.   */ -#    if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#        define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#    endif +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE +#endif  /**   * @brief   Events Flags APIs. @@ -271,9 +271,9 @@   *   * @note    The default is @p TRUE.   */ -#    if !defined(CH_CFG_USE_EVENTS) -#        define CH_CFG_USE_EVENTS TRUE -#    endif +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS                   TRUE +#endif  /**   * @brief   Events Flags APIs with timeout. @@ -283,9 +283,9 @@   * @note    The default is @p TRUE.   * @note    Requires @p CH_CFG_USE_EVENTS.   */ -#    if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#        define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#    endif +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE +#endif  /**   * @brief   Synchronous Messages APIs. @@ -294,9 +294,9 @@   *   * @note    The default is @p TRUE.   */ -#    if !defined(CH_CFG_USE_MESSAGES) -#        define CH_CFG_USE_MESSAGES TRUE -#    endif +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES                 TRUE +#endif  /**   * @brief   Synchronous Messages queuing mode. @@ -307,9 +307,9 @@   *          requirements.   * @note    Requires @p CH_CFG_USE_MESSAGES.   */ -#    if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#        define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#    endif +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY        TRUE +#endif  /**   * @brief   Mailboxes APIs. @@ -319,9 +319,9 @@   * @note    The default is @p TRUE.   * @note    Requires @p CH_CFG_USE_SEMAPHORES.   */ -#    if !defined(CH_CFG_USE_MAILBOXES) -#        define CH_CFG_USE_MAILBOXES TRUE -#    endif +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES                TRUE +#endif  /**   * @brief   Core Memory Manager APIs. @@ -330,9 +330,9 @@   *   * @note    The default is @p TRUE.   */ -#    if !defined(CH_CFG_USE_MEMCORE) -#        define CH_CFG_USE_MEMCORE TRUE -#    endif +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE                  TRUE +#endif  /**   * @brief   Heap Allocator APIs. @@ -344,9 +344,9 @@   *          @p CH_CFG_USE_SEMAPHORES.   * @note    Mutexes are recommended.   */ -#    if !defined(CH_CFG_USE_HEAP) -#        define CH_CFG_USE_HEAP TRUE -#    endif +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP                     TRUE +#endif  /**   * @brief   Memory Pools Allocator APIs. @@ -355,9 +355,9 @@   *   * @note    The default is @p TRUE.   */ -#    if !defined(CH_CFG_USE_MEMPOOLS) -#        define CH_CFG_USE_MEMPOOLS TRUE -#    endif +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS                 TRUE +#endif  /**   * @brief   Objects FIFOs APIs. @@ -366,9 +366,9 @@   *   * @note    The default is @p TRUE.   */ -#    if !defined(CH_CFG_USE_OBJ_FIFOS) -#        define CH_CFG_USE_OBJ_FIFOS TRUE -#    endif +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS                TRUE +#endif  /**   * @brief   Pipes APIs. @@ -377,9 +377,9 @@   *   * @note    The default is @p TRUE.   */ -#    if !defined(CH_CFG_USE_PIPES) -#        define CH_CFG_USE_PIPES TRUE -#    endif +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES                    TRUE +#endif  /**   * @brief   Dynamic Threads APIs. @@ -390,9 +390,9 @@   * @note    Requires @p CH_CFG_USE_WAITEXIT.   * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.   */ -#    if !defined(CH_CFG_USE_DYNAMIC) -#        define CH_CFG_USE_DYNAMIC TRUE -#    endif +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC                  TRUE +#endif  /** @} */ @@ -410,60 +410,60 @@   *   * @note    The default is @p FALSE.   */ -#    if !defined(CH_CFG_USE_FACTORY) -#        define CH_CFG_USE_FACTORY TRUE -#    endif +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY                  TRUE +#endif  /**   * @brief   Maximum length for object names.   * @details If the specified length is zero then the name is stored by   *          pointer but this could have unintended side effects.   */ -#    if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#        define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#    endif +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8 +#endif  /**   * @brief   Enables the registry of generic objects.   */ -#    if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#        define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#    endif +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY     TRUE +#endif  /**   * @brief   Enables factory for generic buffers.   */ -#    if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#        define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#    endif +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS      TRUE +#endif  /**   * @brief   Enables factory for semaphores.   */ -#    if !defined(CH_CFG_FACTORY_SEMAPHORES) -#        define CH_CFG_FACTORY_SEMAPHORES TRUE -#    endif +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES           TRUE +#endif  /**   * @brief   Enables factory for mailboxes.   */ -#    if !defined(CH_CFG_FACTORY_MAILBOXES) -#        define CH_CFG_FACTORY_MAILBOXES TRUE -#    endif +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES            TRUE +#endif  /**   * @brief   Enables factory for objects FIFOs.   */ -#    if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#        define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#    endif +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS            TRUE +#endif  /**   * @brief   Enables factory for Pipes.   */ -#    if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#        define CH_CFG_FACTORY_PIPES TRUE -#    endif +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES                TRUE +#endif  /** @} */ @@ -479,9 +479,9 @@   *   * @note    The default is @p FALSE.   */ -#    if !defined(CH_DBG_STATISTICS) -#        define CH_DBG_STATISTICS FALSE -#    endif +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS                   FALSE +#endif  /**   * @brief   Debug option, system state check. @@ -490,9 +490,9 @@   *   * @note    The default is @p FALSE.   */ -#    if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#        define CH_DBG_SYSTEM_STATE_CHECK FALSE -#    endif +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK           FALSE +#endif  /**   * @brief   Debug option, parameters checks. @@ -501,9 +501,9 @@   *   * @note    The default is @p FALSE.   */ -#    if !defined(CH_DBG_ENABLE_CHECKS) -#        define CH_DBG_ENABLE_CHECKS FALSE -#    endif +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS                FALSE +#endif  /**   * @brief   Debug option, consistency checks. @@ -513,9 +513,9 @@   *   * @note    The default is @p FALSE.   */ -#    if !defined(CH_DBG_ENABLE_ASSERTS) -#        define CH_DBG_ENABLE_ASSERTS FALSE -#    endif +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS               FALSE +#endif  /**   * @brief   Debug option, trace buffer. @@ -523,18 +523,18 @@   *   * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.   */ -#    if !defined(CH_DBG_TRACE_MASK) -#        define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#    endif +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED +#endif  /**   * @brief   Trace buffer entries.   * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is   *          different from @p CH_DBG_TRACE_MASK_DISABLED.   */ -#    if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#        define CH_DBG_TRACE_BUFFER_SIZE 128 -#    endif +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE            128 +#endif  /**   * @brief   Debug option, stack checks. @@ -546,9 +546,9 @@   * @note    The default failure mode is to halt the system with the global   *          @p panic_msg variable set to @p NULL.   */ -#    if !defined(CH_DBG_ENABLE_STACK_CHECK) -#        define CH_DBG_ENABLE_STACK_CHECK TRUE -#    endif +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK           TRUE +#endif  /**   * @brief   Debug option, stacks initialization. @@ -558,9 +558,9 @@   *   * @note    The default is @p FALSE.   */ -#    if !defined(CH_DBG_FILL_THREADS) -#        define CH_DBG_FILL_THREADS FALSE -#    endif +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS                 FALSE +#endif  /**   * @brief   Debug option, threads profiling. @@ -571,9 +571,9 @@   * @note    This debug option is not currently compatible with the   *          tickless mode.   */ -#    if !defined(CH_DBG_THREADS_PROFILING) -#        define CH_DBG_THREADS_PROFILING FALSE -#    endif +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING            FALSE +#endif  /** @} */ @@ -588,22 +588,24 @@   * @brief   System structure extension.   * @details User fields added to the end of the @p ch_system_t structure.   */ -#    define CH_CFG_SYSTEM_EXTRA_FIELDS /* Add threads custom fields here.*/ +#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \ +  /* Add threads custom fields here.*/  /**   * @brief   System initialization hook.   * @details User initialization code added to the @p chSysInit() function   *          just before interrupts are enabled globally.   */ -#    define CH_CFG_SYSTEM_INIT_HOOK()                \ -        { /* Add threads initialization code here.*/ \ -        } +#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \ +  /* Add threads initialization code here.*/                                \ +}  /**   * @brief   Threads descriptor structure extension.   * @details User fields added to the end of the @p thread_t structure.   */ -#    define CH_CFG_THREAD_EXTRA_FIELDS /* Add threads custom fields here.*/ +#define CH_CFG_THREAD_EXTRA_FIELDS                                          \ +  /* Add threads custom fields here.*/  /**   * @brief   Threads initialization hook. @@ -612,39 +614,39 @@   * @note    It is invoked from within @p _thread_init() and implicitly from all   *          the threads creation APIs.   */ -#    define CH_CFG_THREAD_INIT_HOOK(tp)              \ -        { /* Add threads initialization code here.*/ \ -        } +#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \ +  /* Add threads initialization code here.*/                                \ +}  /**   * @brief   Threads finalization hook.   * @details User finalization code added to the @p chThdExit() API.   */ -#    define CH_CFG_THREAD_EXIT_HOOK(tp)            \ -        { /* Add threads finalization code here.*/ \ -        } +#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \ +  /* Add threads finalization code here.*/                                  \ +}  /**   * @brief   Context switch hook.   * @details This hook is invoked just before switching between threads.   */ -#    define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) \ -        { /* Context switch code here.*/         \ -        } +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \ +  /* Context switch code here.*/                                            \ +}  /**   * @brief   ISR enter hook.   */ -#    define CH_CFG_IRQ_PROLOGUE_HOOK() \ -        { /* IRQ prologue code here.*/ \ -        } +#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \ +  /* IRQ prologue code here.*/                                              \ +}  /**   * @brief   ISR exit hook.   */ -#    define CH_CFG_IRQ_EPILOGUE_HOOK() \ -        { /* IRQ epilogue code here.*/ \ -        } +#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \ +  /* IRQ epilogue code here.*/                                              \ +}  /**   * @brief   Idle thread enter hook. @@ -652,9 +654,9 @@   *          should be invoked from here.   * @note    This macro can be used to activate a power saving mode.   */ -#    define CH_CFG_IDLE_ENTER_HOOK() \ -        { /* Idle-enter code here.*/ \ -        } +#define CH_CFG_IDLE_ENTER_HOOK() {                                          \ +  /* Idle-enter code here.*/                                                \ +}  /**   * @brief   Idle thread leave hook. @@ -662,44 +664,44 @@   *          should be invoked from here.   * @note    This macro can be used to deactivate a power saving mode.   */ -#    define CH_CFG_IDLE_LEAVE_HOOK() \ -        { /* Idle-leave code here.*/ \ -        } +#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \ +  /* Idle-leave code here.*/                                                \ +}  /**   * @brief   Idle Loop hook.   * @details This hook is continuously invoked by the idle thread loop.   */ -#    define CH_CFG_IDLE_LOOP_HOOK() \ -        { /* Idle loop code here.*/ \ -        } +#define CH_CFG_IDLE_LOOP_HOOK() {                                           \ +  /* Idle loop code here.*/                                                 \ +}  /**   * @brief   System tick event hook.   * @details This hook is invoked in the system tick handler immediately   *          after processing the virtual timers queue.   */ -#    define CH_CFG_SYSTEM_TICK_HOOK()       \ -        { /* System tick event code here.*/ \ -        } +#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \ +  /* System tick event code here.*/                                         \ +}  /**   * @brief   System halt hook.   * @details This hook is invoked in case to a system halting error before   *          the system is halted.   */ -#    define CH_CFG_SYSTEM_HALT_HOOK(reason) \ -        { /* System halt code here.*/       \ -        } +#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \ +  /* System halt code here.*/                                               \ +}  /**   * @brief   Trace hook.   * @details This hook is invoked each time a new record is written in the   *          trace buffer.   */ -#    define CH_CFG_TRACE_HOOK(tep) \ -        { /* Trace code here.*/    \ -        } +#define CH_CFG_TRACE_HOOK(tep) {                                            \ +  /* Trace code here.*/                                                     \ +}  /** @} */ @@ -707,6 +709,6 @@  /* Port-specific settings (override port settings defaulted in chcore.h).    */  /*===========================================================================*/ -#endif /* CHCONF_H */ +#endif  /* CHCONF_H */  /** @} */ diff --git a/quantum/stm32/halconf.h b/platforms/chibios/GENERIC_STM32_F303XC/configs/halconf.h index b6c7b392ca..6b48e289f9 100644 --- a/quantum/stm32/halconf.h +++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/halconf.h @@ -26,173 +26,173 @@   */  #ifndef HALCONF_H -#    define HALCONF_H +#define HALCONF_H -#    define _CHIBIOS_HAL_CONF_ -#    define _CHIBIOS_HAL_CONF_VER_7_0_ +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ -#    include "mcuconf.h" +#include "mcuconf.h"  /**   * @brief   Enables the PAL subsystem.   */ -#    if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#        define HAL_USE_PAL TRUE -#    endif +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL                         TRUE +#endif  /**   * @brief   Enables the ADC subsystem.   */ -#    if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#        define HAL_USE_ADC FALSE -#    endif +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC                         FALSE +#endif  /**   * @brief   Enables the CAN subsystem.   */ -#    if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#        define HAL_USE_CAN FALSE -#    endif +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN                         FALSE +#endif  /**   * @brief   Enables the cryptographic subsystem.   */ -#    if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#        define HAL_USE_CRY FALSE -#    endif +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY                         FALSE +#endif  /**   * @brief   Enables the DAC subsystem.   */ -#    if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#        define HAL_USE_DAC TRUE -#    endif +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC                         TRUE +#endif  /**   * @brief   Enables the GPT subsystem.   */ -#    if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#        define HAL_USE_GPT TRUE -#    endif +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT                         TRUE +#endif  /**   * @brief   Enables the I2C subsystem.   */ -#    if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#        define HAL_USE_I2C TRUE -#    endif +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C                         TRUE +#endif  /**   * @brief   Enables the I2S subsystem.   */ -#    if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#        define HAL_USE_I2S FALSE -#    endif +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S                         FALSE +#endif  /**   * @brief   Enables the ICU subsystem.   */ -#    if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#        define HAL_USE_ICU FALSE -#    endif +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU                         FALSE +#endif  /**   * @brief   Enables the MAC subsystem.   */ -#    if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#        define HAL_USE_MAC FALSE -#    endif +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC                         FALSE +#endif  /**   * @brief   Enables the MMC_SPI subsystem.   */ -#    if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#        define HAL_USE_MMC_SPI FALSE -#    endif +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI                     FALSE +#endif  /**   * @brief   Enables the PWM subsystem.   */ -#    if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#        define HAL_USE_PWM TRUE -#    endif +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM                         TRUE +#endif  /**   * @brief   Enables the RTC subsystem.   */ -#    if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#        define HAL_USE_RTC FALSE -#    endif +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC                         FALSE +#endif  /**   * @brief   Enables the SDC subsystem.   */ -#    if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#        define HAL_USE_SDC FALSE -#    endif +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC                         FALSE +#endif  /**   * @brief   Enables the SERIAL subsystem.   */ -#    if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#        define HAL_USE_SERIAL FALSE -#    endif +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL                      FALSE +#endif  /**   * @brief   Enables the SERIAL over USB subsystem.   */ -#    if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#        define HAL_USE_SERIAL_USB TRUE -#    endif +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB                  TRUE +#endif  /**   * @brief   Enables the SIO subsystem.   */ -#    if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#        define HAL_USE_SIO FALSE -#    endif +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO                         FALSE +#endif  /**   * @brief   Enables the SPI subsystem.   */ -#    if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#        define HAL_USE_SPI TRUE -#    endif +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI                         TRUE +#endif  /**   * @brief   Enables the TRNG subsystem.   */ -#    if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#        define HAL_USE_TRNG FALSE -#    endif +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG                        FALSE +#endif  /**   * @brief   Enables the UART subsystem.   */ -#    if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#        define HAL_USE_UART FALSE -#    endif +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART                        FALSE +#endif  /**   * @brief   Enables the USB subsystem.   */ -#    if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#        define HAL_USE_USB TRUE -#    endif +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB                         TRUE +#endif  /**   * @brief   Enables the WDG subsystem.   */ -#    if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#        define HAL_USE_WDG FALSE -#    endif +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG                         FALSE +#endif  /**   * @brief   Enables the WSPI subsystem.   */ -#    if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#        define HAL_USE_WSPI FALSE -#    endif +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI                        FALSE +#endif  /*===========================================================================*/  /* PAL driver related settings.                                              */ @@ -202,17 +202,17 @@   * @brief   Enables synchronous APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#        define PAL_USE_CALLBACKS TRUE -#    endif +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS                   TRUE +#endif  /**   * @brief   Enables synchronous APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#        define PAL_USE_WAIT TRUE -#    endif +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT                        TRUE +#endif  /*===========================================================================*/  /* ADC driver related settings.                                              */ @@ -222,17 +222,17 @@   * @brief   Enables synchronous APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#        define ADC_USE_WAIT TRUE -#    endif +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT                        TRUE +#endif  /**   * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#        define ADC_USE_MUTUAL_EXCLUSION TRUE -#    endif +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION            TRUE +#endif  /*===========================================================================*/  /* CAN driver related settings.                                              */ @@ -241,16 +241,16 @@  /**   * @brief   Sleep mode related APIs inclusion switch.   */ -#    if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#        define CAN_USE_SLEEP_MODE TRUE -#    endif +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE                  TRUE +#endif  /**   * @brief   Enforces the driver to use direct callbacks rather than OSAL events.   */ -#    if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#        define CAN_ENFORCE_USE_CALLBACKS FALSE -#    endif +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS           FALSE +#endif  /*===========================================================================*/  /* CRY driver related settings.                                              */ @@ -263,16 +263,16 @@   *          hardware.   * @note    Fall-back implementations may not be present for all algorithms.   */ -#    if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#        define HAL_CRY_USE_FALLBACK FALSE -#    endif +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK                FALSE +#endif  /**   * @brief   Makes the driver forcibly use the fall-back implementations.   */ -#    if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#        define HAL_CRY_ENFORCE_FALLBACK FALSE -#    endif +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK            FALSE +#endif  /*===========================================================================*/  /* DAC driver related settings.                                              */ @@ -282,17 +282,17 @@   * @brief   Enables synchronous APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#        define DAC_USE_WAIT TRUE -#    endif +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT                        TRUE +#endif  /**   * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#        define DAC_USE_MUTUAL_EXCLUSION TRUE -#    endif +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION            TRUE +#endif  /*===========================================================================*/  /* I2C driver related settings.                                              */ @@ -301,9 +301,9 @@  /**   * @brief   Enables the mutual exclusion APIs on the I2C bus.   */ -#    if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#        define I2C_USE_MUTUAL_EXCLUSION TRUE -#    endif +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION            TRUE +#endif  /*===========================================================================*/  /* MAC driver related settings.                                              */ @@ -312,16 +312,16 @@  /**   * @brief   Enables the zero-copy API.   */ -#    if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#        define MAC_USE_ZERO_COPY FALSE -#    endif +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY                   FALSE +#endif  /**   * @brief   Enables an event sources for incoming packets.   */ -#    if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#        define MAC_USE_EVENTS TRUE -#    endif +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS                      TRUE +#endif  /*===========================================================================*/  /* MMC_SPI driver related settings.                                          */ @@ -335,9 +335,9 @@   *          This option is recommended also if the SPI driver does not   *          use a DMA channel and heavily loads the CPU.   */ -#    if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#        define MMC_NICE_WAITING TRUE -#    endif +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING                    TRUE +#endif  /*===========================================================================*/  /* SDC driver related settings.                                              */ @@ -347,18 +347,18 @@   * @brief   Number of initialization attempts before rejecting the card.   * @note    Attempts are performed at 10mS intervals.   */ -#    if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#        define SDC_INIT_RETRY 100 -#    endif +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY                      100 +#endif  /**   * @brief   Include support for MMC cards.   * @note    MMC support is not yet implemented so this option must be kept   *          at @p FALSE.   */ -#    if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#        define SDC_MMC_SUPPORT FALSE -#    endif +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT                     FALSE +#endif  /**   * @brief   Delays insertions. @@ -366,23 +366,23 @@   *          routines releasing some extra CPU time for the threads with   *          lower priority, this may slow down the driver a bit however.   */ -#    if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#        define SDC_NICE_WAITING TRUE -#    endif +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING                    TRUE +#endif  /**   * @brief   OCR initialization constant for V20 cards.   */ -#    if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#        define SDC_INIT_OCR_V20 0x50FF8000U -#    endif +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20                    0x50FF8000U +#endif  /**   * @brief   OCR initialization constant for non-V20 cards.   */ -#    if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#        define SDC_INIT_OCR 0x80100000U -#    endif +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR                        0x80100000U +#endif  /*===========================================================================*/  /* SERIAL driver related settings.                                           */ @@ -393,9 +393,9 @@   * @details Configuration parameter, this is the baud rate selected for the   *          default configuration.   */ -#    if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#        define SERIAL_DEFAULT_BITRATE 38400 -#    endif +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE              38400 +#endif  /**   * @brief   Serial buffers size. @@ -404,9 +404,9 @@   * @note    The default is 16 bytes for both the transmission and receive   *          buffers.   */ -#    if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#        define SERIAL_BUFFERS_SIZE 16 -#    endif +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE                 16 +#endif  /*===========================================================================*/  /* SERIAL_USB driver related setting.                                        */ @@ -419,17 +419,17 @@   * @note    The default is 256 bytes for both the transmission and receive   *          buffers.   */ -#    if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#        define SERIAL_USB_BUFFERS_SIZE 1 -#    endif +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE             1 +#endif  /**   * @brief   Serial over USB number of buffers.   * @note    The default is 2 buffers.   */ -#    if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#        define SERIAL_USB_BUFFERS_NUMBER 2 -#    endif +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER           2 +#endif  /*===========================================================================*/  /* SPI driver related settings.                                              */ @@ -439,33 +439,34 @@   * @brief   Enables synchronous APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#        define SPI_USE_WAIT TRUE -#    endif +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT                        TRUE +#endif  /**   * @brief   Enables circular transfers APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#        define SPI_USE_CIRCULAR FALSE -#    endif +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR                    FALSE +#endif +  /**   * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#        define SPI_USE_MUTUAL_EXCLUSION TRUE -#    endif +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION            TRUE +#endif  /**   * @brief   Handling method for SPI CS line.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#        define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#    endif +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD +#endif  /*===========================================================================*/  /* UART driver related settings.                                             */ @@ -475,17 +476,17 @@   * @brief   Enables synchronous APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#        define UART_USE_WAIT FALSE -#    endif +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT                       FALSE +#endif  /**   * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#        define UART_USE_MUTUAL_EXCLUSION FALSE -#    endif +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION           FALSE +#endif  /*===========================================================================*/  /* USB driver related settings.                                              */ @@ -495,9 +496,9 @@   * @brief   Enables synchronous APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#        define USB_USE_WAIT TRUE -#    endif +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT                        TRUE +#endif  /*===========================================================================*/  /* WSPI driver related settings.                                             */ @@ -507,17 +508,17 @@   * @brief   Enables synchronous APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#        define WSPI_USE_WAIT TRUE -#    endif +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT                       TRUE +#endif  /**   * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.   * @note    Disabling this option saves both code and data space.   */ -#    if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#        define WSPI_USE_MUTUAL_EXCLUSION TRUE -#    endif +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION           TRUE +#endif  #endif /* HALCONF_H */ diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h new file mode 100644 index 0000000000..3b15883485 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h @@ -0,0 +1,273 @@ +/* +    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + +    Licensed under the Apache License, Version 2.0 (the "License"); +    you may not use this file except in compliance with the License. +    You may obtain a copy of the License at + +        http://www.apache.org/licenses/LICENSE-2.0 + +    Unless required by applicable law or agreed to in writing, software +    distributed under the License is distributed on an "AS IS" BASIS, +    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +    See the License for the specific language governing permissions and +    limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F3xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0       Lowest...Highest. + * + * DMA priorities: + * 0...3        Lowest...Highest. + */ + +#define STM32F3xx_MCUCONF +#define STM32F303_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT                       FALSE +#define STM32_PVD_ENABLE                    FALSE +#define STM32_PLS                           STM32_PLS_LEV0 +#define STM32_HSI_ENABLED                   TRUE +#define STM32_LSI_ENABLED                   TRUE +#define STM32_HSE_ENABLED                   TRUE +#define STM32_LSE_ENABLED                   FALSE +#define STM32_SW                            STM32_SW_PLL +#define STM32_PLLSRC                        STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE                  1 +#define STM32_PLLMUL_VALUE                  9 +#define STM32_HPRE                          STM32_HPRE_DIV1 +#define STM32_PPRE1                         STM32_PPRE1_DIV2 +#define STM32_PPRE2                         STM32_PPRE2_DIV2 +#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1 +#define STM32_USART1SW                      STM32_USART1SW_PCLK +#define STM32_USART2SW                      STM32_USART2SW_PCLK +#define STM32_USART3SW                      STM32_USART3SW_PCLK +#define STM32_UART4SW                       STM32_UART4SW_PCLK +#define STM32_UART5SW                       STM32_UART5SW_PCLK +#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL                        STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED            TRUE +#define STM32_USBPRE                        STM32_USBPRE_DIV1P5 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY            6 +#define STM32_IRQ_EXTI1_PRIORITY            6 +#define STM32_IRQ_EXTI2_PRIORITY            6 +#define STM32_IRQ_EXTI3_PRIORITY            6 +#define STM32_IRQ_EXTI4_PRIORITY            6 +#define STM32_IRQ_EXTI5_9_PRIORITY          6 +#define STM32_IRQ_EXTI10_15_PRIORITY        6 +#define STM32_IRQ_EXTI16_PRIORITY           6 +#define STM32_IRQ_EXTI17_PRIORITY           15 +#define STM32_IRQ_EXTI18_PRIORITY           6 +#define STM32_IRQ_EXTI19_PRIORITY           15 +#define STM32_IRQ_EXTI20_PRIORITY           15 +#define STM32_IRQ_EXTI21_22_29_PRIORITY     6 +#define STM32_IRQ_EXTI30_32_PRIORITY        6 +#define STM32_IRQ_EXTI33_PRIORITY           6 +#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY   7 +#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY    7 +#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY          7 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE                 FALSE +#define STM32_ADC_COMPACT_SAMPLES           FALSE +#define STM32_ADC_USE_ADC1                  FALSE +#define STM32_ADC_USE_ADC2                  FALSE +#define STM32_ADC_USE_ADC3                  FALSE +#define STM32_ADC_USE_ADC4                  FALSE +#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5) +#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC1_DMA_PRIORITY         2 +#define STM32_ADC_ADC2_DMA_PRIORITY         2 +#define STM32_ADC_ADC3_DMA_PRIORITY         2 +#define STM32_ADC_ADC4_DMA_PRIORITY         2 +#define STM32_ADC_ADC12_IRQ_PRIORITY        5 +#define STM32_ADC_ADC3_IRQ_PRIORITY         5 +#define STM32_ADC_ADC4_IRQ_PRIORITY         5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5 +#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5 +#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1                  FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY         11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE                 FALSE +#define STM32_DAC_USE_DAC1_CH1              TRUE +#define STM32_DAC_USE_DAC1_CH2              TRUE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1                  FALSE +#define STM32_GPT_USE_TIM2                  FALSE +#define STM32_GPT_USE_TIM3                  FALSE +#define STM32_GPT_USE_TIM4                  FALSE +#define STM32_GPT_USE_TIM6                  TRUE +#define STM32_GPT_USE_TIM7                  TRUE +#define STM32_GPT_USE_TIM8                  TRUE +#define STM32_GPT_USE_TIM15                 FALSE +#define STM32_GPT_USE_TIM16                 FALSE +#define STM32_GPT_USE_TIM17                 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY         7 +#define STM32_GPT_TIM2_IRQ_PRIORITY         7 +#define STM32_GPT_TIM3_IRQ_PRIORITY         7 +#define STM32_GPT_TIM4_IRQ_PRIORITY         7 +#define STM32_GPT_TIM6_IRQ_PRIORITY         7 +#define STM32_GPT_TIM7_IRQ_PRIORITY         7 +#define STM32_GPT_TIM8_IRQ_PRIORITY         7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1                  TRUE +#define STM32_I2C_USE_I2C2                  FALSE +#define STM32_I2C_BUSY_TIMEOUT              50 +#define STM32_I2C_I2C1_IRQ_PRIORITY         10 +#define STM32_I2C_I2C2_IRQ_PRIORITY         10 +#define STM32_I2C_USE_DMA                   TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY         1 +#define STM32_I2C_I2C2_DMA_PRIORITY         1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1                  FALSE +#define STM32_ICU_USE_TIM2                  FALSE +#define STM32_ICU_USE_TIM3                  FALSE +#define STM32_ICU_USE_TIM4                  FALSE +#define STM32_ICU_USE_TIM8                  FALSE +#define STM32_ICU_USE_TIM15                 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY         7 +#define STM32_ICU_TIM2_IRQ_PRIORITY         7 +#define STM32_ICU_TIM3_IRQ_PRIORITY         7 +#define STM32_ICU_TIM4_IRQ_PRIORITY         7 +#define STM32_ICU_TIM8_IRQ_PRIORITY         7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED              FALSE +#define STM32_PWM_USE_TIM1                  FALSE +#define STM32_PWM_USE_TIM2                  FALSE +#define STM32_PWM_USE_TIM3                  TRUE +#define STM32_PWM_USE_TIM4                  TRUE +#define STM32_PWM_USE_TIM8                  FALSE +#define STM32_PWM_USE_TIM15                 FALSE +#define STM32_PWM_USE_TIM16                 FALSE +#define STM32_PWM_USE_TIM17                 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY         7 +#define STM32_PWM_TIM2_IRQ_PRIORITY         7 +#define STM32_PWM_TIM3_IRQ_PRIORITY         7 +#define STM32_PWM_TIM4_IRQ_PRIORITY         7 +#define STM32_PWM_TIM8_IRQ_PRIORITY         7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE               32 +#define STM32_RTC_PRESS_VALUE               1024 +#define STM32_RTC_CR_INIT                   0 +#define STM32_RTC_TAMPCR_INIT               0 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1             FALSE +#define STM32_SERIAL_USE_USART2             TRUE +#define STM32_SERIAL_USE_USART3             FALSE +#define STM32_SERIAL_USE_UART4              FALSE +#define STM32_SERIAL_USE_UART5              FALSE +#define STM32_SERIAL_USART1_PRIORITY        12 +#define STM32_SERIAL_USART2_PRIORITY        12 +#define STM32_SERIAL_USART3_PRIORITY        12 +#define STM32_SERIAL_UART4_PRIORITY         12 +#define STM32_SERIAL_UART5_PRIORITY         12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1                  FALSE +#define STM32_SPI_USE_SPI2                  TRUE +#define STM32_SPI_USE_SPI3                  FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY         1 +#define STM32_SPI_SPI2_DMA_PRIORITY         1 +#define STM32_SPI_SPI3_DMA_PRIORITY         1 +#define STM32_SPI_SPI1_IRQ_PRIORITY         10 +#define STM32_SPI_SPI2_IRQ_PRIORITY         10 +#define STM32_SPI_SPI3_IRQ_PRIORITY         10 +#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY               8 +#define STM32_ST_USE_TIMER                  2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1               FALSE +#define STM32_UART_USE_USART2               FALSE +#define STM32_UART_USE_USART3               FALSE +#define STM32_UART_USART1_IRQ_PRIORITY      12 +#define STM32_UART_USART2_IRQ_PRIORITY      12 +#define STM32_UART_USART3_IRQ_PRIORITY      12 +#define STM32_UART_USART1_DMA_PRIORITY      0 +#define STM32_UART_USART2_DMA_PRIORITY      0 +#define STM32_UART_USART3_DMA_PRIORITY      0 +#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1                  TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY      13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY      14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG                  FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk b/platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk new file mode 100644 index 0000000000..23907c810a --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk @@ -0,0 +1,9 @@ +# Proton C MCU settings for converting AVR projects +MCU = STM32F303 + +# These are defaults based on what has been implemented for ARM boards +AUDIO_ENABLE = yes +WS2812_DRIVER = bitbang + +# Force task driven PWM until ARM can provide automatic configuration +BACKLIGHT_DRIVER = software diff --git a/drivers/boards/IC_TEENSY_3_1/board.c b/platforms/chibios/IC_TEENSY_3_1/board/board.c index 63e3f64929..63e3f64929 100644 --- a/drivers/boards/IC_TEENSY_3_1/board.c +++ b/platforms/chibios/IC_TEENSY_3_1/board/board.c diff --git a/drivers/boards/IC_TEENSY_3_1/board.h b/platforms/chibios/IC_TEENSY_3_1/board/board.h index c8259ab0c7..c8259ab0c7 100644 --- a/drivers/boards/IC_TEENSY_3_1/board.h +++ b/platforms/chibios/IC_TEENSY_3_1/board/board.h diff --git a/platforms/chibios/IC_TEENSY_3_1/board/board.mk b/platforms/chibios/IC_TEENSY_3_1/board/board.mk new file mode 100644 index 0000000000..842e335905 --- /dev/null +++ b/platforms/chibios/IC_TEENSY_3_1/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/board/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/board + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC  += $(BOARDINC) diff --git a/drivers/boards/STM32_F103_STM32DUINO/board.c b/platforms/chibios/STM32_F103_STM32DUINO/board/board.c index 8c5a87f35f..9135f61364 100644 --- a/drivers/boards/STM32_F103_STM32DUINO/board.c +++ b/platforms/chibios/STM32_F103_STM32DUINO/board/board.c @@ -35,12 +35,15 @@ const PALConfig pal_default_config =  };  #endif +__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} +  /*   * Early initialization code.   * This initialization must be performed just after stack setup and before   * any other initialization.   */  void __early_init(void) { +  enter_bootloader_mode_if_requested();    stm32_clock_init();  } diff --git a/drivers/boards/STM32_F103_STM32DUINO/board.h b/platforms/chibios/STM32_F103_STM32DUINO/board/board.h index 09d182d6ca..09d182d6ca 100644 --- a/drivers/boards/STM32_F103_STM32DUINO/board.h +++ b/platforms/chibios/STM32_F103_STM32DUINO/board/board.h diff --git a/platforms/chibios/STM32_F103_STM32DUINO/board/board.mk b/platforms/chibios/STM32_F103_STM32DUINO/board/board.mk new file mode 100644 index 0000000000..842e335905 --- /dev/null +++ b/platforms/chibios/STM32_F103_STM32DUINO/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/board/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/board + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC  += $(BOARDINC) diff --git a/platforms/chibios/keyboard-config-templates/board.h b/platforms/chibios/keyboard-config-templates/board.h new file mode 100644 index 0000000000..967ec13a1c --- /dev/null +++ b/platforms/chibios/keyboard-config-templates/board.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + *  This program is free software: you can redistribute it and/or modify + *  it under the terms of the GNU General Public License as published by + *  the Free Software Foundation, either version 3 of the License, or + *  (at your option) any later version. + * + *  This program is distributed in the hope that it will be useful, + *  but WITHOUT ANY WARRANTY; without even the implied warranty of + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *  GNU General Public License for more details. + * + *  You should have received a copy of the GNU General Public License + *  along with this program.  If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "board.h" + +// #undef STM32_HSE_BYPASS diff --git a/platforms/chibios/keyboard-config-templates/chconf.h b/platforms/chibios/keyboard-config-templates/chconf.h new file mode 100644 index 0000000000..7c2af93f5e --- /dev/null +++ b/platforms/chibios/keyboard-config-templates/chconf.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + *  This program is free software: you can redistribute it and/or modify + *  it under the terms of the GNU General Public License as published by + *  the Free Software Foundation, either version 3 of the License, or + *  (at your option) any later version. + * + *  This program is distributed in the hope that it will be useful, + *  but WITHOUT ANY WARRANTY; without even the implied warranty of + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *  GNU General Public License for more details. + * + *  You should have received a copy of the GNU General Public License + *  along with this program.  If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +// #define CH_CFG_OPTIMIZE_SPEED TRUE + +#include_next "chconf.h" diff --git a/platforms/chibios/keyboard-config-templates/halconf.h b/platforms/chibios/keyboard-config-templates/halconf.h new file mode 100644 index 0000000000..ab5f738f97 --- /dev/null +++ b/platforms/chibios/keyboard-config-templates/halconf.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + *  This program is free software: you can redistribute it and/or modify + *  it under the terms of the GNU General Public License as published by + *  the Free Software Foundation, either version 3 of the License, or + *  (at your option) any later version. + * + *  This program is distributed in the hope that it will be useful, + *  but WITHOUT ANY WARRANTY; without even the implied warranty of + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *  GNU General Public License for more details. + * + *  You should have received a copy of the GNU General Public License + *  along with this program.  If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +// #define HAL_USE_DAC TRUE + +#include_next "halconf.h" diff --git a/platforms/chibios/keyboard-config-templates/mcuconf.h b/platforms/chibios/keyboard-config-templates/mcuconf.h new file mode 100644 index 0000000000..5b42747b95 --- /dev/null +++ b/platforms/chibios/keyboard-config-templates/mcuconf.h @@ -0,0 +1,21 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + *  This program is free software: you can redistribute it and/or modify + *  it under the terms of the GNU General Public License as published by + *  the Free Software Foundation, either version 3 of the License, or + *  (at your option) any later version. + * + *  This program is distributed in the hope that it will be useful, + *  but WITHOUT ANY WARRANTY; without even the implied warranty of + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *  GNU General Public License for more details. + * + *  You should have received a copy of the GNU General Public License + *  along with this program.  If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "mcuconf.h" + +// #undef STM32_HSE_ENABLED +// #define STM32_HSE_ENABLED FALSE diff --git a/drivers/boards/ld/MKL26Z64.ld b/platforms/chibios/ld/MKL26Z64.ld index c4ca8b874c..c4ca8b874c 100644 --- a/drivers/boards/ld/MKL26Z64.ld +++ b/platforms/chibios/ld/MKL26Z64.ld diff --git a/drivers/boards/ld/STM32F103x8_stm32duino_bootloader.ld b/platforms/chibios/ld/STM32F103x8_stm32duino_bootloader.ld index d0688ef601..d0688ef601 100644 --- a/drivers/boards/ld/STM32F103x8_stm32duino_bootloader.ld +++ b/platforms/chibios/ld/STM32F103x8_stm32duino_bootloader.ld diff --git a/quantum/stm32/mcuconf.h b/quantum/stm32/mcuconf.h deleted file mode 100644 index 71994a98e0..0000000000 --- a/quantum/stm32/mcuconf.h +++ /dev/null @@ -1,273 +0,0 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0       Lowest...Highest. - * - * DMA priorities: - * 0...3        Lowest...Highest. - */ - -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 TRUE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/quantum/stm32/proton_c.mk b/quantum/stm32/proton_c.mk deleted file mode 100644 index b25b555045..0000000000 --- a/quantum/stm32/proton_c.mk +++ /dev/null @@ -1,47 +0,0 @@ -# Proton C MCU settings for converting AVR projects - -# These are defaults based on what has been implemented for ARM boards -AUDIO_ENABLE = yes -WS2812_DRIVER = bitbang - -# Force task driven PWM until ARM can provide automatic configuration -BACKLIGHT_DRIVER = software - -# The rest of these settings shouldn't change - -## chip/board settings -# - the next two should match the directories in -#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F3xx - -# Linker script to use -# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -#   or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F303xC - -# Startup code to use -#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f3xx - -# Board: it should exist either in <chibios>/os/hal/boards/ -#  or <this_dir>/boards -BOARD = GENERIC_STM32_F303XC - -# Cortex version -MCU  = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 -OPT_DEFS = - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p df11 -v 0483 diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index 09aaddeef0..4e8abc9be6 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -50,11 +50,42 @@ PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLAT  endif  include $(PLATFORM_MK) +BOARD_MK := + +ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/board.mk)","") +    BOARD_PATH = $(KEYBOARD_PATH_5) +    BOARD_MK += $(KEYBOARD_PATH_5)/boards/$(BOARD)/board.mk +else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/boards/$(BOARD)/board.mk)","") +    BOARD_PATH = $(KEYBOARD_PATH_4) +    BOARD_MK += $(KEYBOARD_PATH_4)/boards/$(BOARD)/board.mk +else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/boards/$(BOARD)/board.mk)","") +    BOARD_PATH = $(KEYBOARD_PATH_3) +    BOARD_MK += $(KEYBOARD_PATH_3)/boards/$(BOARD)/board.mk +else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/boards/$(BOARD)/board.mk)","") +    BOARD_PATH = $(KEYBOARD_PATH_2) +    BOARD_MK += $(KEYBOARD_PATH_2)/boards/$(BOARD)/board.mk +else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/board.mk)","") +    BOARD_PATH = $(KEYBOARD_PATH_1) +    BOARD_MK += $(KEYBOARD_PATH_1)/boards/$(BOARD)/board.mk +else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/$(BOARD)/board/board.mk)","") +    BOARD_PATH = $(TOP_DIR)/platforms/chibios/$(BOARD) +    BOARD_MK += $(TOP_DIR)/platforms/chibios/$(BOARD)/board/board.mk +    KEYBOARD_PATHS += $(BOARD_PATH)/configs +endif + +ifeq ("$(wildcard $(BOARD_MK))","") +	BOARD_MK = $(CHIBIOS)/os/hal/boards/$(BOARD)/board.mk +	ifeq ("$(wildcard $(BOARD_MK))","") +		BOARD_MK = $(CHIBIOS_CONTRIB)/os/hal/boards/$(BOARD)/board.mk +	endif +endif +  # Bootloader address  ifdef STM32_BOOTLOADER_ADDRESS      OPT_DEFS += -DSTM32_BOOTLOADER_ADDRESS=$(STM32_BOOTLOADER_ADDRESS)  endif +# Work out if we need to set up the include for the bootloader definitions  ifneq ("$(wildcard $(KEYBOARD_PATH_5)/bootloader_defs.h)","")      OPT_DEFS += -include $(KEYBOARD_PATH_5)/bootloader_defs.h  else ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h)","") @@ -75,38 +106,52 @@ else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/bootloader_defs.h)","")      OPT_DEFS += -include $(KEYBOARD_PATH_1)/bootloader_defs.h  else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h)","")      OPT_DEFS += -include $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h -else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h)","") -    OPT_DEFS += -include $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h +else ifneq ("$(wildcard $(BOARD_PATH)/configs/bootloader_defs.h)","") +    OPT_DEFS += -include $(BOARD_PATH)/configs/bootloader_defs.h  endif -BOARD_MK := +# Work out the config file directories +ifneq ("$(wildcard $(KEYBOARD_PATH_5)/chconf.h)","") +    CHCONFDIR = $(KEYBOARD_PATH_5) +else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/chconf.h)","") +    CHCONFDIR = $(KEYBOARD_PATH_4) +else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/chconf.h)","") +    CHCONFDIR = $(KEYBOARD_PATH_3) +else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/chconf.h)","") +    CHCONFDIR = $(KEYBOARD_PATH_2) +else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/chconf.h)","") +    CHCONFDIR = $(KEYBOARD_PATH_1) +else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/$(BOARD)/configs/chconf.h)","") +    CHCONFDIR = $(TOP_DIR)/platforms/chibios/$(BOARD)/configs +endif -ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/board.mk)","") -    BOARD_PATH = $(KEYBOARD_PATH_5) -    BOARD_MK += $(KEYBOARD_PATH_5)/boards/$(BOARD)/board.mk -else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/boards/$(BOARD)/board.mk)","") -    BOARD_PATH = $(KEYBOARD_PATH_4) -    BOARD_MK += $(KEYBOARD_PATH_4)/boards/$(BOARD)/board.mk -else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/boards/$(BOARD)/board.mk)","") -    BOARD_PATH = $(KEYBOARD_PATH_3) -    BOARD_MK += $(KEYBOARD_PATH_3)/boards/$(BOARD)/board.mk -else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/boards/$(BOARD)/board.mk)","") -    BOARD_PATH = $(KEYBOARD_PATH_2) -    BOARD_MK += $(KEYBOARD_PATH_2)/boards/$(BOARD)/board.mk -else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/board.mk)","") -    BOARD_PATH = $(KEYBOARD_PATH_1) -    BOARD_MK += $(KEYBOARD_PATH_1)/boards/$(BOARD)/board.mk -else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/$(BOARD)/board.mk)","") -    BOARD_PATH = $(TOP_DIR)/drivers -    BOARD_MK += $(TOP_DIR)/drivers/boards/$(BOARD)/board.mk +ifneq ("$(wildcard $(KEYBOARD_PATH_5)/halconf.h)","") +    HALCONFDIR = $(KEYBOARD_PATH_5) +else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/halconf.h)","") +    HALCONFDIR = $(KEYBOARD_PATH_4) +else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/halconf.h)","") +    HALCONFDIR = $(KEYBOARD_PATH_3) +else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/halconf.h)","") +    HALCONFDIR = $(KEYBOARD_PATH_2) +else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/halconf.h)","") +    HALCONFDIR = $(KEYBOARD_PATH_1) +else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/$(BOARD)/configs/halconf.h)","") +    HALCONFDIR = $(TOP_DIR)/platforms/chibios/$(BOARD)/configs  endif -ifeq ("$(wildcard $(BOARD_MK))","") -	BOARD_MK = $(CHIBIOS)/os/hal/boards/$(BOARD)/board.mk -	ifeq ("$(wildcard $(BOARD_MK))","") -		BOARD_MK = $(CHIBIOS_CONTRIB)/os/hal/boards/$(BOARD)/board.mk -	endif +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk + +ifeq ("$(PLATFORM_NAME)","") +	PLATFORM_NAME = platform +endif + +PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk +ifeq ("$(wildcard $(PLATFORM_MK))","") +PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk  endif +include $(PLATFORM_MK) +  include $(BOARD_MK)  -include $(CHIBIOS)/os/hal/osal/rt/osal.mk         # ChibiOS <= 19.x @@ -138,8 +183,8 @@ else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/ld/$(MCU_LDSCRIPT).ld)","")      LDSCRIPT = $(KEYBOARD_PATH_2)/ld/$(MCU_LDSCRIPT).ld  else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/ld/$(MCU_LDSCRIPT).ld)","")      LDSCRIPT = $(KEYBOARD_PATH_1)/ld/$(MCU_LDSCRIPT).ld -else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/ld/$(MCU_LDSCRIPT).ld)","") -    LDSCRIPT = $(TOP_DIR)/drivers/boards/ld/$(MCU_LDSCRIPT).ld +else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/ld/$(MCU_LDSCRIPT).ld)","") +    LDSCRIPT = $(TOP_DIR)/platforms/chibios/ld/$(MCU_LDSCRIPT).ld  else ifneq ("$(wildcard $(STARTUPLD_CONTRIB)/$(MCU_LDSCRIPT).ld)","")      LDSCRIPT = $(STARTUPLD_CONTRIB)/$(MCU_LDSCRIPT).ld      USE_CHIBIOS_CONTRIB = yes @@ -163,6 +208,7 @@ QUANTUM_LIB_SRC += $(STARTUPASM) $(PORTASM) $(OSALASM)  CHIBISRC := $(patsubst $(TOP_DIR)/%,%,$(CHIBISRC))  EXTRAINCDIRS += $(CHIBIOS)/os/license $(CHIBIOS)/os/oslib/include \ +         $(TOP_DIR)/platforms/chibios/$(BOARD)/configs \           $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \           $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \           $(STREAMSINC) $(CHIBIOS)/os/various $(COMMON_VPATH) @@ -182,6 +228,8 @@ else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/halconf_community.h)","")      USE_CHIBIOS_CONTRIB = yes  else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/halconf_community.h)","")      USE_CHIBIOS_CONTRIB = yes +else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/$(BOARD)/configs/halconf_community.h)","") +    USE_CHIBIOS_CONTRIB = yes  endif  ifeq ($(strip $(USE_CHIBIOS_CONTRIB)),yes) @@ -194,6 +242,15 @@ endif  # Project, sources and paths  ############################################################################## +############################################################################## +# Injected configs +# +ifneq ("$(wildcard $(BOARD_PATH)/configs/config.h)","") +    CONFIG_H += $(BOARD_PATH)/configs/config.h +endif +ifneq ("$(wildcard $(BOARD_PATH)/configs/post_config.h)","") +    POST_CONFIG_H += $(BOARD_PATH)/configs/post_config.h +endif  ##############################################################################  # Compiler settings diff --git a/util/chibios-upgrader.sh b/util/chibios-upgrader.sh index 2174da3cf1..ebc12abe7d 100755 --- a/util/chibios-upgrader.sh +++ b/util/chibios-upgrader.sh @@ -38,7 +38,11 @@ find_chibi_files() {      local search_path="$1"      shift      local conditions=( "$@" ) -    find -L "$search_path" -not -path '*/lib/chibios*' -and -not -path '*/lib/ugfx*' -and -not -path '*/util/*' -and \( "${conditions[@]}" \) | sort +    for file in $(find -L "$search_path" -not -path '*/lib/chibios*' -and -not -path '*/lib/ugfx*' -and -not -path '*/util/*' -and \( "${conditions[@]}" \) | sort) ; do +        if [ -z "$(grep 'include_next' "$file")" ] ; then +            echo $file +        fi +    done  }  revert_chibi_files() { diff --git a/util/travis_compiled_push.sh b/util/travis_compiled_push.sh index 68f6d5c114..195a87208b 100755 --- a/util/travis_compiled_push.sh +++ b/util/travis_compiled_push.sh @@ -13,7 +13,7 @@ if [[ "$TRAVIS_BRANCH" == "master" && "$TRAVIS_PULL_REQUEST" == "false" ]] ; the  # fix formatting  git checkout master  git diff --diff-filter=AM --name-only -n 1 -z ${TRAVIS_COMMIT_RANGE} | xargs -0 dos2unix -git diff --diff-filter=AM --name-only -n 1 -z ${TRAVIS_COMMIT_RANGE} '*.c' '*.h' '*.cpp' | grep -z -e '^drivers' -e '^quantum' -e '^tests' -e '^tmk_core' | grep -zv -e 'quantum/template' -e 'tmk_core/protocol/usb_hid' | xargs -0 clang-format-7 -i +git diff --diff-filter=AM --name-only -n 1 -z ${TRAVIS_COMMIT_RANGE} '*.c' '*.h' '*.cpp' | grep -z -e '^drivers' -e '^quantum' -e '^tests' -e '^tmk_core' | grep -zv -e 'quantum/template' -e 'tmk_core/protocol/usb_hid' -e 'platforms/chibios' | xargs -0 clang-format-7 -i  git diff --diff-filter=AM --name-only -n 1 -z ${TRAVIS_COMMIT_RANGE} | xargs -0 git add  git commit -m "format code according to conventions [skip ci]" && git push [email protected]:qmk/qmk_firmware.git master | 
