diff options
| -rw-r--r-- | keyboards/mechstudio/ud_40_ortho/config.h | 60 | ||||
| -rw-r--r-- | keyboards/mechstudio/ud_40_ortho/info.json | 12 | ||||
| -rw-r--r-- | keyboards/mechstudio/ud_40_ortho/keymaps/default/keymap.c | 43 | ||||
| -rw-r--r-- | keyboards/mechstudio/ud_40_ortho/keymaps/via/keymap.c | 43 | ||||
| -rw-r--r-- | keyboards/mechstudio/ud_40_ortho/keymaps/via/rules.mk | 1 | ||||
| -rw-r--r-- | keyboards/mechstudio/ud_40_ortho/readme.md | 22 | ||||
| -rw-r--r-- | keyboards/mechstudio/ud_40_ortho/rules.mk | 24 | ||||
| -rw-r--r-- | keyboards/mechstudio/ud_40_ortho/ud_40_ortho.c | 16 | ||||
| -rw-r--r-- | keyboards/mechstudio/ud_40_ortho/ud_40_ortho.h | 39 | 
9 files changed, 260 insertions, 0 deletions
| diff --git a/keyboards/mechstudio/ud_40_ortho/config.h b/keyboards/mechstudio/ud_40_ortho/config.h new file mode 100644 index 0000000000..9520fdd396 --- /dev/null +++ b/keyboards/mechstudio/ud_40_ortho/config.h @@ -0,0 +1,60 @@ +/* Copyright 2020 David Dejaeghere + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program.  If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID       0x4D53 +#define PRODUCT_ID      0x0002 +#define DEVICE_VER      0x0002 +#define MANUFACTURER    Mech Studio +#define PRODUCT         UD_40 Ortholinear + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS {C2,B4,B5,B6} +#define MATRIX_COL_PINS {C5,D0,B3,B2,B1,B0,D6,D5,D4,D3,D2,D1} +#define UNUSED_PINS {C4,C6,C7} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN B7 + #ifdef RGB_DI_PIN +   #define RGBLED_NUM 10 +   #define RGBLIGHT_HUE_STEP 8 +   #define RGBLIGHT_SAT_STEP 8 +   #define RGBLIGHT_VAL_STEP 8 +   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +   #define RGBLIGHT_ANIMATIONS + #endif + +/* set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +#define QMK_ESC_OUTPUT F0 // usually COL +#define QMK_ESC_INPUT B7 // usually ROW diff --git a/keyboards/mechstudio/ud_40_ortho/info.json b/keyboards/mechstudio/ud_40_ortho/info.json new file mode 100644 index 0000000000..785b466fc7 --- /dev/null +++ b/keyboards/mechstudio/ud_40_ortho/info.json @@ -0,0 +1,12 @@ +{ +  "keyboard_name": "UD_40 ortho",  +  "url": "https://mech.studio/projects/ud_40/",  +  "maintainer": "dejaeghered",  +  "width": 12,  +  "height": 4,  +  "layouts": { +    "LAYOUT_ortho_4x12": { +      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] +    } +  } +} diff --git a/keyboards/mechstudio/ud_40_ortho/keymaps/default/keymap.c b/keyboards/mechstudio/ud_40_ortho/keymaps/default/keymap.c new file mode 100644 index 0000000000..70fb425b3b --- /dev/null +++ b/keyboards/mechstudio/ud_40_ortho/keymaps/default/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2020 David Dejaeghere + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program.  If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { +    _MA, +    _LO, +    _HI +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = LAYOUT_ortho_4x12( +  KC_ESC,   KC_Q,        KC_W,        KC_E,        KC_R,        KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_BSPC, +  KC_TAB,   KC_A,        KC_S,        KC_D,        KC_F,        KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT, +  KC_LSFT,  KC_Z,        KC_X,        KC_C,        KC_V,        KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_ENT, +  _______,  KC_LCTRL,    KC_LALT,     KC_LGUI,     MO(_LO),     KC_SPC,   KC_SPC,   MO(_HI),  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT), + +[_LO] = LAYOUT_ortho_4x12( +  KC_GRV,   KC_1,        KC_2,        KC_3,        KC_4,        KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_DEL, +  KC_TILD,  KC_F1,       KC_F2,       KC_F3,       KC_F4,       KC_F5,    KC_F6,    KC_MINS,  KC_EQL,   KC_LBRC,  KC_RBRC,  KC_BSLS, +  _______,  KC_F7,       KC_F8,       KC_F9,       KC_F10,      KC_F11,   KC_F12,   _______,  _______,  KC_PGUP,  KC_PGDN,  _______, +  KC_INS,   KC_HOME,     KC_END,      KC_DEL,      _______,     _______,  _______,  _______,  _______,  KC_VOLD,  KC_VOLU,  _______), + +[_HI] = LAYOUT_ortho_4x12( +  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______, +  _______,  RGB_TOG,  RGB_MOD,  RGB_HUI,  RGB_SAI,  RGB_VAI,  _______,  _______,  _______,  _______,  _______,  _______, +  _______,  _______,  RGB_RMOD, RGB_HUD,  RGB_SAD,  RGB_VAD,  _______,  _______,  _______,  _______,  _______,  _______, +  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______), +}; diff --git a/keyboards/mechstudio/ud_40_ortho/keymaps/via/keymap.c b/keyboards/mechstudio/ud_40_ortho/keymaps/via/keymap.c new file mode 100644 index 0000000000..c61bec5a05 --- /dev/null +++ b/keyboards/mechstudio/ud_40_ortho/keymaps/via/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2020 David Dejaeghere + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program.  If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ortho_4x12( +  KC_ESC,   KC_Q,        KC_W,        KC_E,        KC_R,        KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_BSPC, +  KC_TAB,   KC_A,        KC_S,        KC_D,        KC_F,        KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT, +  KC_LSFT,  KC_Z,        KC_X,        KC_C,        KC_V,        KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_ENT, +  _______,  KC_LCTRL,    KC_LALT,     KC_LGUI,     KC_FN13,     KC_SPC,   KC_SPC,   KC_FN23,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT), + +[1] = LAYOUT_ortho_4x12( +  KC_GRV,   KC_1,        KC_2,        KC_3,        KC_4,        KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_DEL, +  KC_TILD,  KC_F1,       KC_F2,       KC_F3,       KC_F4,       KC_F5,    KC_F6,    KC_MINS,  KC_EQL,   KC_LBRC,  KC_RBRC,  KC_BSLS, +  _______,  KC_F7,       KC_F8,       KC_F9,       KC_F10,      KC_F11,   KC_F12,   _______,  _______,  KC_PGUP,  KC_PGDN,  _______, +  KC_INS,   KC_HOME,     KC_END,      KC_DEL,      _______,     _______,  _______,  _______,  _______,  KC_VOLD,  KC_VOLU,  _______), + +[2] = LAYOUT_ortho_4x12( +  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______, +  _______,  RGB_TOG,  RGB_MOD,  RGB_HUI,  RGB_SAI,  RGB_VAI,  _______,  _______,  _______,  _______,  _______,  _______, +  _______,  _______,  RGB_RMOD, RGB_HUD,  RGB_SAD,  RGB_VAD,  _______,  _______,  _______,  _______,  _______,  _______, +  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______), +   +[3] = LAYOUT_ortho_4x12( +  _______,  _______,     _______,     _______,     _______,     _______,  _______,  _______,  _______,  _______,  _______,  _______, +  _______,  _______,     _______,     _______,     _______,     _______,  _______,  _______,  _______,  _______,  _______,  _______, +  _______,  _______,     _______,     _______,     _______,     _______,  _______,  _______,  _______,  _______,  _______,  _______, +  _______,  _______,     _______,     _______,     _______,     _______,  _______,  _______,  _______,  _______,  _______,  _______) + +}; diff --git a/keyboards/mechstudio/ud_40_ortho/keymaps/via/rules.mk b/keyboards/mechstudio/ud_40_ortho/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/mechstudio/ud_40_ortho/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/mechstudio/ud_40_ortho/readme.md b/keyboards/mechstudio/ud_40_ortho/readme.md new file mode 100644 index 0000000000..211f174520 --- /dev/null +++ b/keyboards/mechstudio/ud_40_ortho/readme.md @@ -0,0 +1,22 @@ +# ud_40_ortho + + + +## Support +* Keyboard Maintainer: [NecromanX](https://github.com/dejaeghered) +* Hardware Supported: UD_40 Ortho +* Hardware Availability: [mech.studio](https://mech.studio/projects/ud_40/) + +## Features +- QMK Firmware +- USB-C Connector +- RGB underglow +- Ortholinear layout +- no in switch LEDs + +## Build +Make example for this keyboard (after setting up your build environment): + +    make mechstudio/ud_40_ortho:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/mechstudio/ud_40_ortho/rules.mk b/keyboards/mechstudio/ud_40_ortho/rules.mk new file mode 100644 index 0000000000..8ae52f196f --- /dev/null +++ b/keyboards/mechstudio/ud_40_ortho/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u2 + +# Bootloader selection +BOOTLOADER = qmk-dfu + +# Build Options +#   change yes to no to disable +# +BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes       # Mouse keys +EXTRAKEY_ENABLE = yes       # Audio control and System control +CONSOLE_ENABLE = no         # Console for debug +COMMAND_ENABLE = no         # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no            # USB Nkey Rollover +BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no       # Enable Bluetooth +AUDIO_ENABLE = no           # Audio output + +LAYOUTS = ortho_4x12 diff --git a/keyboards/mechstudio/ud_40_ortho/ud_40_ortho.c b/keyboards/mechstudio/ud_40_ortho/ud_40_ortho.c new file mode 100644 index 0000000000..054684e7bd --- /dev/null +++ b/keyboards/mechstudio/ud_40_ortho/ud_40_ortho.c @@ -0,0 +1,16 @@ +/* Copyright 2020 David Dejaeghere + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program.  If not, see <http://www.gnu.org/licenses/>. + */ +#include "ud_40_ortho.h" diff --git a/keyboards/mechstudio/ud_40_ortho/ud_40_ortho.h b/keyboards/mechstudio/ud_40_ortho/ud_40_ortho.h new file mode 100644 index 0000000000..6e0b608e7b --- /dev/null +++ b/keyboards/mechstudio/ud_40_ortho/ud_40_ortho.h @@ -0,0 +1,39 @@ +/* Copyright 2020 David Dejaeghere + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program.  If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_ortho_4x12( \ +	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ +	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ +	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ +	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) { \ +	{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ +	{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ +	{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ +	{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ +} | 
