diff options
| -rw-r--r-- | keyboards/handwired/sono1/chconf.h | 721 | ||||
| -rw-r--r-- | keyboards/handwired/sono1/halconf.h | 536 | ||||
| -rw-r--r-- | keyboards/handwired/sono1/mcuconf.h | 218 | ||||
| -rw-r--r-- | keyboards/mechlovin/tmkl/rules.mk | 1 | 
4 files changed, 64 insertions, 1412 deletions
| diff --git a/keyboards/handwired/sono1/chconf.h b/keyboards/handwired/sono1/chconf.h index f5e471640c..4d09f7b7dd 100644 --- a/keyboards/handwired/sono1/chconf.h +++ b/keyboards/handwired/sono1/chconf.h @@ -1,714 +1,41 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -/** - * @file    rt/templates/chconf.h - * @brief   Configuration file template. - * @details A copy of this file must be placed in each project directory, it - *          contains the application specific kernel settings. +/* Copyright 2020 QMK   * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief   System time counter resolution. - * @note    Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION                32 -#endif - -/** - * @brief   System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - *          setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY                 100000 -#endif - -/** - * @brief   Time intervals data size. - * @note    Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE               32 -#endif - -/** - * @brief   Time types data size. - * @note    Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE              32 -#endif - -/** - * @brief   Time delta constant for the tick-less mode. - * @note    If this value is zero then the system uses the classic - *          periodic tick. This value represents the minimum number - *          of ticks that is safe to specify in a timeout directive. - *          The value one is not valid, timeouts are rounded up to - *          this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA                 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief   Round robin interval. - * @details This constant is the number of system ticks allowed for the - *          threads before preemption occurs. Setting this value to zero - *          disables the preemption for threads with equal priority and the - *          round robin becomes cooperative. Note that higher priority - *          threads can still preempt, the kernel is always preemptive. - * @note    Disabling the round robin preemption makes the kernel more compact - *          and generally faster. - * @note    The round robin preemption is not supported in tickless mode and - *          must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM                 0 -#endif - -/** - * @brief   Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - *          then the whole available RAM is used. The core memory is made - *          available to the heap allocator and/or can be used directly through - *          the simplified core memory allocator. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version.   * - * @note    In order to let the OS manage the whole RAM the linker script must - *          provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note    Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE                 0 -#endif - -/** - * @brief   Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - *          does not spawn the idle thread. The application @p main() - *          function becomes the idle thread and must implement an - *          infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD               FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief   OS optimization. - * @details If enabled then time efficient rather than space efficient code - *          is used when two possible implementations exist. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details.   * - * @note    This is not related to the compiler optimization options. - * @note    The default is @p TRUE. + * You should have received a copy of the GNU General Public License + * along with this program.  If not, see <http://www.gnu.org/licenses/>.   */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED               TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief   Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - *          the kernel. - * - * @note    The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM                       FALSE -#endif - -/** - * @brief   Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note    The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY                 TRUE -#endif - -/** - * @brief   Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - *          the kernel. - * - * @note    The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT                 TRUE -#endif - -/** - * @brief   Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note    The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES               TRUE -#endif - -/** - * @brief   Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - *          priority rather than in FIFO order. - * - * @note    The default is @p FALSE. Enable this if you have special - *          requirements. - * @note    Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE -#endif - -/** - * @brief   Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note    The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES                  TRUE -#endif - -/** - * @brief   Enables recursive behavior on mutexes. - * @note    Recursive mutexes are heavier and have an increased - *          memory footprint. - * - * @note    The default is @p FALSE. - * @note    Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE -#endif - -/** - * @brief   Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - *          in the kernel. - * - * @note    The default is @p TRUE. - * @note    Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS                 TRUE -#endif - -/** - * @brief   Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - *          specification are included in the kernel. - * - * @note    The default is @p TRUE. - * @note    Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE -#endif - -/** - * @brief   Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note    The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS                   TRUE -#endif - -/** - * @brief   Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - *          are included in the kernel. - * - * @note    The default is @p TRUE. - * @note    Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE -#endif - -/** - * @brief   Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - *          in the kernel. - * - * @note    The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES                 TRUE -#endif - -/** - * @brief   Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - *          FIFO order. - * - * @note    The default is @p FALSE. Enable this if you have special - *          requirements. - * @note    Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE -#endif - -/** - * @brief   Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - *          included in the kernel. - * - * @note    The default is @p TRUE. - * @note    Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES                TRUE -#endif - -/** - * @brief   Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - *          in the kernel. - * - * @note    The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE                  TRUE -#endif - -/** - * @brief   Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - *          in the kernel. - * - * @note    The default is @p TRUE. - * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - *          @p CH_CFG_USE_SEMAPHORES. - * @note    Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP                     TRUE -#endif - -/** - * @brief   Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - *          in the kernel. - * - * @note    The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS                 FALSE -#endif - -/** - * @brief   Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - *          in the kernel. - * - * @note    The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS                FALSE -#endif - -/** - * @brief   Pipes APIs. - * @details If enabled then the pipes APIs are included - *          in the kernel. - * - * @note    The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES                    FALSE -#endif - -/** - * @brief   Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - *          in the kernel. - * - * @note    The default is @p TRUE. - * @note    Requires @p CH_CFG_USE_WAITEXIT. - * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC                  FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief   Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - *          kernel. - * - * @note    The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY                  FALSE -#endif - -/** - * @brief   Maximum length for object names. - * @details If the specified length is zero then the name is stored by - *          pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8 -#endif - -/** - * @brief   Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY     FALSE -#endif - -/** - * @brief   Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS      FALSE -#endif - -/** - * @brief   Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES           FALSE -#endif - -/** - * @brief   Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES            FALSE -#endif - -/** - * @brief   Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS            FALSE -#endif - -/** - * @brief   Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES                FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief   Debug option, kernel statistics. - * - * @note    The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS                   FALSE -#endif - -/** - * @brief   Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - *          at runtime. - * - * @note    The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK           FALSE -#endif - -/** - * @brief   Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - *          parameters are activated. - * - * @note    The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS                FALSE -#endif - -/** - * @brief   Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - *          activated. This includes consistency checks inside the kernel, - *          runtime anomalies and port-defined checks. - * - * @note    The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS               FALSE -#endif - -/** - * @brief   Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief   Trace buffer entries. - * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - *          different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE            128 -#endif - -/** - * @brief   Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note    The default is @p FALSE. - * @note    The stack check is performed in a architecture/port dependent way. - *          It may not be implemented or some ports. - * @note    The default failure mode is to halt the system with the global - *          @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK           FALSE -#endif - -/** - * @brief   Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - *          value when a thread is created. This can be useful for the - *          runtime measurement of the used stack. - * - * @note    The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS                 FALSE -#endif - -/** - * @brief   Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - *          counts the system ticks occurred while executing the thread. - * - * @note    The default is @p FALSE. - * @note    This debug option is not currently compatible with the - *          tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING            FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief   System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \ -  /* Add threads custom fields here.*/ - -/** - * @brief   System initialization hook. - * @details User initialization code added to the @p chSysInit() function - *          just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \ -  /* Add threads initialization code here.*/                                \ -} - -/** - * @brief   Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS                                          \ -  /* Add threads custom fields here.*/ - -/** - * @brief   Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note    It is invoked from within @p _thread_init() and implicitly from all - *          the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \ -  /* Add threads initialization code here.*/                                \ -} - -/** - * @brief   Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \ -  /* Add threads finalization code here.*/                                  \ -} - -/** - * @brief   Context switch hook. - * @details This hook is invoked just before switching between threads. +/* + * This file was auto-generated by: + *    `qmk chibios-confupdate -i keyboards/handwired/sono1/chconf.h -r platforms/chibios/common/configs/chconf.h`   */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \ -  /* Context switch code here.*/                                            \ -} -/** - * @brief   ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \ -  /* IRQ prologue code here.*/                                              \ -} +#pragma once -/** - * @brief   ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \ -  /* IRQ epilogue code here.*/                                              \ -} - -/** - * @brief   Idle thread enter hook. - * @note    This hook is invoked within a critical zone, no OS functions - *          should be invoked from here. - * @note    This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() {                                          \ -  /* Idle-enter code here.*/                                                \ -} +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief   Idle thread leave hook. - * @note    This hook is invoked within a critical zone, no OS functions - *          should be invoked from here. - * @note    This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \ -  /* Idle-leave code here.*/                                                \ -} +#define CH_CFG_USE_TM FALSE -/** - * @brief   Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() {                                           \ -  /* Idle loop code here.*/                                                 \ -} +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief   System tick event hook. - * @details This hook is invoked in the system tick handler immediately - *          after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \ -  /* System tick event code here.*/                                         \ -} +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief   System halt hook. - * @details This hook is invoked in case to a system halting error before - *          the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \ -  /* System halt code here.*/                                               \ -} +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief   Trace hook. - * @details This hook is invoked each time a new record is written in the - *          trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) {                                            \ -  /* Trace code here.*/                                                     \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h).    */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif  /* CHCONF_H */ +#include_next <chconf.h> -/** @} */ diff --git a/keyboards/handwired/sono1/halconf.h b/keyboards/handwired/sono1/halconf.h index ff5ae7e8a5..0ed8198dc4 100644 --- a/keyboards/handwired/sono1/halconf.h +++ b/keyboards/handwired/sono1/halconf.h @@ -1,525 +1,27 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -/** - * @file    templates/halconf.h - * @brief   HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - *          various device drivers from your application. You may also use - *          this file in order to override the device drivers default settings. +/* Copyright 2020 QMK   * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief   Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL                         TRUE -#endif - -/** - * @brief   Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC                         FALSE -#endif - -/** - * @brief   Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN                         FALSE -#endif - -/** - * @brief   Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY                         FALSE -#endif - -/** - * @brief   Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC                         FALSE -#endif - -/** - * @brief   Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT                         FALSE -#endif - -/** - * @brief   Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C                         FALSE -#endif - -/** - * @brief   Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S                         FALSE -#endif - -/** - * @brief   Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU                         FALSE -#endif - -/** - * @brief   Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC                         FALSE -#endif - -/** - * @brief   Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI                     FALSE -#endif - -/** - * @brief   Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM                         TRUE -#endif - -/** - * @brief   Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC                         FALSE -#endif - -/** - * @brief   Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC                         FALSE -#endif - -/** - * @brief   Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL                      FALSE -#endif - -/** - * @brief   Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB                  FALSE -#endif - -/** - * @brief   Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO                         FALSE -#endif - -/** - * @brief   Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI                         FALSE -#endif - -/** - * @brief   Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG                        FALSE -#endif - -/** - * @brief   Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART                        FALSE -#endif - -/** - * @brief   Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB                         TRUE -#endif - -/** - * @brief   Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG                         FALSE -#endif - -/** - * @brief   Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI                        FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS                   FALSE -#endif - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT                        FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT                        TRUE -#endif - -/** - * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION            TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE                  TRUE -#endif - -/** - * @brief   Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS           FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - *          implementation for algorithms not supported by the underlying - *          hardware. - * @note    Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK                FALSE -#endif - -/** - * @brief   Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK            FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT                        TRUE -#endif - -/** - * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION            TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION            TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY                   FALSE -#endif - -/** - * @brief   Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS                      TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings.                                          */ -/*===========================================================================*/ - -/** - * @brief   Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - *          routines releasing some extra CPU time for the threads with - *          lower priority, this may slow down the driver a bit however. - *          This option is recommended also if the SPI driver does not - *          use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING                    TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Number of initialization attempts before rejecting the card. - * @note    Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY                      100 -#endif - -/** - * @brief   Include support for MMC cards. - * @note    MMC support is not yet implemented so this option must be kept - *          at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT                     FALSE -#endif - -/** - * @brief   Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - *          routines releasing some extra CPU time for the threads with - *          lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING                    TRUE -#endif - -/** - * @brief   OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20                    0x50FF8000U -#endif - -/** - * @brief   OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR                        0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings.                                           */ -/*===========================================================================*/ - -/** - * @brief   Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - *          default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE              38400 -#endif - -/** - * @brief   Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - *          buffers depending on the requirements of your application. - * @note    The default is 16 bytes for both the transmission and receive - *          buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE                 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting.                                        */ -/*===========================================================================*/ - -/** - * @brief   Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - *          the USB data endpoint maximum packet size. - * @note    The default is 256 bytes for both the transmission and receive - *          buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE             1 -#endif - -/** - * @brief   Serial over USB number of buffers. - * @note    The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER           2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings.                                              */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT                        TRUE -#endif - -/** - * @brief   Enables circular transfers APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR                    FALSE -#endif - - -/** - * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION            TRUE -#endif - -/** - * @brief   Handling method for SPI CS line. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings.                                             */ -/*===========================================================================*/ - -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT                       FALSE -#endif - -/** - * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program.  If not, see <http://www.gnu.org/licenses/>.   */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION           FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings.                                              */ -/*===========================================================================*/ -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. +/* + * This file was auto-generated by: + *    `qmk chibios-confupdate -i keyboards/handwired/sono1/halconf.h -r platforms/chibios/common/configs/halconf.h`   */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT                        TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings.                                             */ -/*===========================================================================*/ -/** - * @brief   Enables synchronous APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT                       TRUE -#endif +#pragma once -/** - * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note    Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION           TRUE -#endif +#define HAL_USE_PWM TRUE -#endif /* HALCONF_H */ +#include_next <halconf.h> -/** @} */ diff --git a/keyboards/handwired/sono1/mcuconf.h b/keyboards/handwired/sono1/mcuconf.h index a645d3c5d5..6a41e22fed 100644 --- a/keyboards/handwired/sono1/mcuconf.h +++ b/keyboards/handwired/sono1/mcuconf.h @@ -1,209 +1,31 @@ -/* -    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at - -        http://www.apache.org/licenses/LICENSE-2.0 - -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK   * - * IRQ priorities: - * 15...0       Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version.   * - * DMA priorities: - * 0...3        Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT                       FALSE -#define STM32_HSI_ENABLED                   TRUE -#define STM32_LSI_ENABLED                   FALSE -#define STM32_HSE_ENABLED                   TRUE -#define STM32_LSE_ENABLED                   FALSE -#define STM32_SW                            STM32_SW_PLL -#define STM32_PLLSRC                        STM32_PLLSRC_HSE -#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE                  9 -#define STM32_HPRE                          STM32_HPRE_DIV1 -#define STM32_PPRE1                         STM32_PPRE1_DIV2 -#define STM32_PPRE2                         STM32_PPRE2_DIV2 -#define STM32_ADCPRE                        STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED            TRUE -#define STM32_USBPRE                        STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE                    FALSE -#define STM32_PLS                           STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1                  FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY         2 -#define STM32_ADC_ADC1_IRQ_PRIORITY         6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1                  FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY         11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY        6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY        6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY        6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY        6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY        6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY       6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY       6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY       6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY       6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1                  FALSE -#define STM32_GPT_USE_TIM2                  FALSE -#define STM32_GPT_USE_TIM3                  FALSE -#define STM32_GPT_USE_TIM4                  FALSE -#define STM32_GPT_USE_TIM5                  FALSE -#define STM32_GPT_USE_TIM8                  FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY         7 -#define STM32_GPT_TIM2_IRQ_PRIORITY         7 -#define STM32_GPT_TIM3_IRQ_PRIORITY         7 -#define STM32_GPT_TIM4_IRQ_PRIORITY         7 -#define STM32_GPT_TIM5_IRQ_PRIORITY         7 -#define STM32_GPT_TIM8_IRQ_PRIORITY         7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1                  FALSE -#define STM32_I2C_USE_I2C2                  FALSE -#define STM32_I2C_BUSY_TIMEOUT              50 -#define STM32_I2C_I2C1_IRQ_PRIORITY         5 -#define STM32_I2C_I2C2_IRQ_PRIORITY         5 -#define STM32_I2C_I2C1_DMA_PRIORITY         3 -#define STM32_I2C_I2C2_DMA_PRIORITY         3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1                  FALSE -#define STM32_ICU_USE_TIM2                  FALSE -#define STM32_ICU_USE_TIM3                  FALSE -#define STM32_ICU_USE_TIM4                  FALSE -#define STM32_ICU_USE_TIM5                  FALSE -#define STM32_ICU_USE_TIM8                  FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY         7 -#define STM32_ICU_TIM2_IRQ_PRIORITY         7 -#define STM32_ICU_TIM3_IRQ_PRIORITY         7 -#define STM32_ICU_TIM4_IRQ_PRIORITY         7 -#define STM32_ICU_TIM5_IRQ_PRIORITY         7 -#define STM32_ICU_TIM8_IRQ_PRIORITY         7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED              FALSE -#define STM32_PWM_USE_TIM1                  FALSE -#define STM32_PWM_USE_TIM2                  TRUE -#define STM32_PWM_USE_TIM3                  FALSE -#define STM32_PWM_USE_TIM4                  FALSE -#define STM32_PWM_USE_TIM5                  FALSE -#define STM32_PWM_USE_TIM8                  FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY         7 -#define STM32_PWM_TIM2_IRQ_PRIORITY         7 -#define STM32_PWM_TIM3_IRQ_PRIORITY         7 -#define STM32_PWM_TIM4_IRQ_PRIORITY         7 -#define STM32_PWM_TIM5_IRQ_PRIORITY         7 -#define STM32_PWM_TIM8_IRQ_PRIORITY         7 - -/* - * RTC driver system settings. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program.  If not, see <http://www.gnu.org/licenses/>.   */ -#define STM32_RTC_IRQ_PRIORITY              15  /* - * SERIAL driver system settings. + * This file was auto-generated by: + *    `qmk chibios-confupdate -i keyboards/handwired/sono1/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h`   */ -#define STM32_SERIAL_USE_USART1             FALSE -#define STM32_SERIAL_USE_USART2             FALSE -#define STM32_SERIAL_USE_USART3             FALSE -#define STM32_SERIAL_USE_UART4              FALSE -#define STM32_SERIAL_USE_UART5              FALSE -#define STM32_SERIAL_USART1_PRIORITY        12 -#define STM32_SERIAL_USART2_PRIORITY        12 -#define STM32_SERIAL_USART3_PRIORITY        12 -#define STM32_SERIAL_UART4_PRIORITY         12 -#define STM32_SERIAL_UART5_PRIORITY         12 -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1                  FALSE -#define STM32_SPI_USE_SPI2                  FALSE -#define STM32_SPI_USE_SPI3                  FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY         1 -#define STM32_SPI_SPI2_DMA_PRIORITY         1 -#define STM32_SPI_SPI3_DMA_PRIORITY         1 -#define STM32_SPI_SPI1_IRQ_PRIORITY         10 -#define STM32_SPI_SPI2_IRQ_PRIORITY         10 -#define STM32_SPI_SPI3_IRQ_PRIORITY         10 -#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure") +#pragma once -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY               8 -#define STM32_ST_USE_TIMER                  2 +#include_next <mcuconf.h> -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1               FALSE -#define STM32_UART_USE_USART2               FALSE -#define STM32_UART_USE_USART3               FALSE -#define STM32_UART_USART1_IRQ_PRIORITY      12 -#define STM32_UART_USART2_IRQ_PRIORITY      12 -#define STM32_UART_USART3_IRQ_PRIORITY      12 -#define STM32_UART_USART1_DMA_PRIORITY      0 -#define STM32_UART_USART2_DMA_PRIORITY      0 -#define STM32_UART_USART3_DMA_PRIORITY      0 -#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1                  TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY      13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY      14 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/mechlovin/tmkl/rules.mk b/keyboards/mechlovin/tmkl/rules.mk index 2673ab3c99..bbe320ff51 100644 --- a/keyboards/mechlovin/tmkl/rules.mk +++ b/keyboards/mechlovin/tmkl/rules.mk @@ -1,5 +1,6 @@  # MCU name  MCU = STM32F303 +BOARD = QMK_PROTON_C  # Build Options  #   change yes to no to disable | 
