diff options
| -rw-r--r-- | keyboards/felix/config.h | 218 | ||||
| -rw-r--r-- | keyboards/felix/felix.h | 5 | ||||
| -rw-r--r-- | keyboards/felix/info.json | 23 | ||||
| -rw-r--r-- | keyboards/felix/keymaps/default/keymap.c | 25 | ||||
| -rw-r--r-- | keyboards/felix/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/felix/rules.mk | 38 | 
6 files changed, 257 insertions, 54 deletions
| diff --git a/keyboards/felix/config.h b/keyboards/felix/config.h index 0dd8eea07c..19a5247d27 100644 --- a/keyboards/felix/config.h +++ b/keyboards/felix/config.h @@ -1,5 +1,4 @@ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once  #include "config_common.h" @@ -9,40 +8,225 @@  #define DEVICE_VER      0x0001  #define MANUFACTURER    Unikeyboard  #define PRODUCT         Felix -#define DESCRIPTION     4x5 number/macropad. +#define DESCRIPTION     4x5 number/macropad  /* key matrix size */  #define MATRIX_ROWS 5  #define MATRIX_COLS 4 -/* key matrix pins */ +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/  #define MATRIX_ROW_PINS { B2, B3, B1, F7, F6 }  #define MATRIX_COL_PINS { B5, B4, E6, D7 }  #define UNUSED_PINS -/* COL2ROW or ROW2COL */ +/* COL2ROW, ROW2COL */  #define DIODE_DIRECTION ROW2COL -/* number of backlight levels */ -/* Not sure what pin controls the backlighting, need help for this. */ -#define BACKLIGHT_PIN +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define BACKLIGHT_PIN C6  #define BACKLIGHT_LEVELS 5 +//#define BACKLIGHT_BREATHING + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +//   #define RGBLED_NUM 16 +//   #define RGBLIGHT_HUE_STEP 8 +//   #define RGBLIGHT_SAT_STEP 8 +//   #define RGBLIGHT_VAL_STEP 8 +//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +//   #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +//   #define RGBLIGHT_EFFECT_BREATHING +//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD +//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//   #define RGBLIGHT_EFFECT_SNAKE +//   #define RGBLIGHT_EFFECT_KNIGHT +//   #define RGBLIGHT_EFFECT_CHRISTMAS +//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT +//   #define RGBLIGHT_EFFECT_RGB_TEST +//   #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64 +//   /*==== use exp() and sin() ====*/ +//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7 +//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255 +// #endif -/* Set 0 if debouncing isn't needed */ +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */  #define DEBOUNCE 5 +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST +  /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */  #define LOCKING_SUPPORT_ENABLE -  /* Locking resynchronize hack */  #define LOCKING_RESYNC_ENABLE -/* there is no rgb underglow by default. */ -#define RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP           H +//#define MAGIC_KEY_HELP_ALT       SLASH +//#define MAGIC_KEY_DEBUG          D +//#define MAGIC_KEY_DEBUG_MATRIX   X +//#define MAGIC_KEY_DEBUG_KBD      K +//#define MAGIC_KEY_DEBUG_MOUSE    M +//#define MAGIC_KEY_VERSION        V +//#define MAGIC_KEY_STATUS         S +//#define MAGIC_KEY_CONSOLE        C +//#define MAGIC_KEY_LAYER0         0 +//#define MAGIC_KEY_LAYER0_ALT     GRAVE +//#define MAGIC_KEY_LAYER1         1 +//#define MAGIC_KEY_LAYER2         2 +//#define MAGIC_KEY_LAYER3         3 +//#define MAGIC_KEY_LAYER4         4 +//#define MAGIC_KEY_LAYER5         5 +//#define MAGIC_KEY_LAYER6         6 +//#define MAGIC_KEY_LAYER7         7 +//#define MAGIC_KEY_LAYER8         8 +//#define MAGIC_KEY_LAYER9         9 +//#define MAGIC_KEY_BOOTLOADER     B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK           CAPS +//#define MAGIC_KEY_EEPROM         E +//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE +//#define MAGIC_KEY_NKRO           N +//#define MAGIC_KEY_SLEEP_LED      Z + +/* + * Feature disable options + *  These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: +   - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: +   - MIDI notes can be added to the keymap +   - Octave shift and transpose +   - Virtual sustain, portamento, and modulation wheel +   - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES           2     //< number of visible lines of the display +#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display + +#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT         PORTB        //< port for the LCD lines +#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0 +#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1 +#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2 +#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3 +#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3 +#define LCD_RS_PORT      LCD_PORT     //< port for RS line +#define LCD_RS_PIN       3            //< pin  for RS line +#define LCD_RW_PORT      LCD_PORT     //< port for RW line +#define LCD_RW_PIN       2            //< pin  for RW line +#define LCD_E_PORT       LCD_PORT     //< port for Enable line +#define LCD_E_PIN        1            //< pin  for Enable line  #endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/felix/felix.h b/keyboards/felix/felix.h index 86a9b4e72e..f43a586c8e 100644 --- a/keyboards/felix/felix.h +++ b/keyboards/felix/felix.h @@ -1,5 +1,4 @@ -#ifndef FELIX_H -#define FELIX_H +#pragma once  #include "quantum.h" @@ -18,5 +17,3 @@  }  #define LAYOUT LAYOUT_ortho_5x4 - -#endif
\ No newline at end of file diff --git a/keyboards/felix/info.json b/keyboards/felix/info.json index a9b3c3dd0e..3b1cfda2f3 100644 --- a/keyboards/felix/info.json +++ b/keyboards/felix/info.json @@ -6,7 +6,28 @@    "height": 5,    "layouts": {      "LAYOUT_ortho_5x4": { -      "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K100", "x":0, "y":1}, {"label":"K101", "x":1, "y":1}, {"label":"K102", "x":2, "y":1}, {"label":"K103", "x":3, "y":1}, {"label":"K200", "x":0, "y":2}, {"label":"K201", "x":1, "y":2}, {"label":"K202", "x":2, "y":2}, {"label":"K203", "x":3, "y":2}, {"label":"K300", "x":0, "y":3}, {"label":"K301", "x":1, "y":3}, {"label":"K302", "x":2, "y":3}, {"label":"K303", "x":3, "y":3}, {"label":"K400", "x":0, "y":4}, {"label":"K401", "x":1, "y":4}, {"label":"K402", "x":2, "y":4}, {"label":"K403", "x":3, "y":4}] +      "layout": [ +        {"label":"K000", "x":0, "y":0}, +        {"label":"K001", "x":1, "y":0}, +        {"label":"K002", "x":2, "y":0}, +        {"label":"K003", "x":3, "y":0}, +        {"label":"K100", "x":0, "y":1}, +        {"label":"K101", "x":1, "y":1}, +        {"label":"K102", "x":2, "y":1}, +        {"label":"K103", "x":3, "y":1}, +        {"label":"K200", "x":0, "y":2}, +        {"label":"K201", "x":1, "y":2}, +        {"label":"K202", "x":2, "y":2}, +        {"label":"K203", "x":3, "y":2}, +        {"label":"K300", "x":0, "y":3}, +        {"label":"K301", "x":1, "y":3}, +        {"label":"K302", "x":2, "y":3}, +        {"label":"K303", "x":3, "y":3}, +        {"label":"K400", "x":0, "y":4}, +        {"label":"K401", "x":1, "y":4}, +        {"label":"K402", "x":2, "y":4}, +        {"label":"K403", "x":3, "y":4} +      ]      }    }  } diff --git a/keyboards/felix/keymaps/default/keymap.c b/keyboards/felix/keymaps/default/keymap.c index a0093bf8e4..630a46c086 100644 --- a/keyboards/felix/keymaps/default/keymap.c +++ b/keyboards/felix/keymaps/default/keymap.c @@ -1,22 +1,11 @@  #include QMK_KEYBOARD_H  const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -  LAYOUT( -    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, -    KC_P7,   KC_P8,   KC_P9,   KC_PPLS, -    KC_P4,   KC_P5,   KC_P6,   KC_HOME, -    KC_P1,   KC_P2,   KC_P3,   KC_END, -    KC_P0,   KC_PEQL, KC_PDOT, KC_PENT -  ), - +    LAYOUT_ortho_5x4( +        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, +        KC_P7,   KC_P8,   KC_P9,   KC_PPLS, +        KC_P4,   KC_P5,   KC_P6,   KC_HOME, +        KC_P1,   KC_P2,   KC_P3,   KC_END, +        KC_P0,   KC_PEQL, KC_PDOT, KC_PENT +    )  }; - -void persistant_default_layer_set(uint16_t default_layer) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { -  switch (keycode) { -  } -  return true; -} diff --git a/keyboards/felix/readme.md b/keyboards/felix/readme.md index d671b0c01c..0a3fe10a6e 100644 --- a/keyboards/felix/readme.md +++ b/keyboards/felix/readme.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment):      make felix:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/felix/rules.mk b/keyboards/felix/rules.mk index e8f8343416..b33785b64a 100644 --- a/keyboards/felix/rules.mk +++ b/keyboards/felix/rules.mk @@ -37,22 +37,34 @@ F_USB = $(F_CPU)  OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Bootloader selection +#   Teensy       halfkay +#   Pro Micro    caterina +#   Atmel DFU    atmel-dfu +#   LUFA DFU     lufa-dfu +#   QMK DFU      qmk-dfu +#   atmega32a    bootloadHID +BOOTLOADER = caterina  # Build Options -#   comment out to disable the options. +#   change yes to no to disable  # -BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes	# Mouse keys(+4700) -EXTRAKEY_ENABLE = yes	# Audio control and System control(+450) -CONSOLE_ENABLE = no	# Console for debug(+400) -COMMAND_ENABLE = no    # Commands for debug and configuration -SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes       # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes       # Audio control and System control(+450) +CONSOLE_ENABLE = no         # Console for debug(+400) +COMMAND_ENABLE = no         # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes           # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow +MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no         # Unicode +BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no           # Audio output on port C6 +FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches +HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)  LAYOUTS = ortho_5x4 | 
