diff options
| -rw-r--r-- | keyboards/mntre/config.h | 101 | ||||
| -rw-r--r-- | keyboards/mntre/info.json | 98 | ||||
| -rw-r--r-- | keyboards/mntre/keymaps/default/keymap.c | 31 | ||||
| -rw-r--r-- | keyboards/mntre/keymaps/default/readme.md | 19 | ||||
| -rw-r--r-- | keyboards/mntre/mntre.c | 19 | ||||
| -rw-r--r-- | keyboards/mntre/mntre.h | 30 | ||||
| -rw-r--r-- | keyboards/mntre/readme.md | 27 | ||||
| -rw-r--r-- | keyboards/mntre/rules.mk | 21 | 
8 files changed, 346 insertions, 0 deletions
| diff --git a/keyboards/mntre/config.h b/keyboards/mntre/config.h new file mode 100644 index 0000000000..9ee3d3f272 --- /dev/null +++ b/keyboards/mntre/config.h @@ -0,0 +1,101 @@ +// Copyright 2021 Cedric Vincent (@cdc-mkb) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID    0xFEED +#define PRODUCT_ID   0x1302 +#define DEVICE_VER   0x0002 +#define MANUFACTURER MNT Research GmbH +#define PRODUCT      MNT Reform USB Keyboard (Standalone) + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B6, B5, B4, D7, D6, D4 } +#define MATRIX_COL_PINS { D5, F7, E6, C7, B3, B2, B1, B0, F0, F1, F4, F5, F6, C6 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_CUSTOM_RESOLUTION 0x400 +#define BACKLIGHT_LIMIT_VAL 84 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + *  These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/mntre/info.json b/keyboards/mntre/info.json new file mode 100644 index 0000000000..05e4bd4fd0 --- /dev/null +++ b/keyboards/mntre/info.json @@ -0,0 +1,98 @@ +{ +    "keyboard_name": "MNT Reform USB Keyboard (Standalone)", +    "url": "https://shop.mntmn.com/products/mnt-reform-usb-keyboard-standalone", +    "maintainer": "cdc-mkb", +    "layouts": { +        "LAYOUT": { +            "layout": [ +                {"label": "ESC", "x": 0,  "y": 0}, +                {"label": "F1",  "x": 1,  "y": 0}, +                {"label": "F2",  "x": 2,  "y": 0}, +                {"label": "F3",  "x": 3,  "y": 0}, +                {"label": "F4",  "x": 4,  "y": 0}, +                {"label": "F5",  "x": 5,  "y": 0}, +                {"label": "F6",  "x": 6,  "y": 0}, +                {"label": "F7",  "x": 7,  "y": 0}, +                {"label": "F8",  "x": 8,  "y": 0}, +                {"label": "F9",  "x": 9,  "y": 0}, +                {"label": "F10", "x": 10, "y": 0}, +                {"label": "F11", "x": 11, "y": 0}, +                {"label": "F12", "x": 12, "y": 0}, +                {"label": "NO",  "x": 13, "y": 0, "w": 1.5}, + +                {"label": "GRAVE",  "x": 0,  "y": 1}, +                {"label": "1",      "x": 1,  "y": 1}, +                {"label": "2",      "x": 2,  "y": 1}, +                {"label": "3",      "x": 3,  "y": 1}, +                {"label": "4",      "x": 4,  "y": 1}, +                {"label": "5",      "x": 5,  "y": 1}, +                {"label": "6",      "x": 6,  "y": 1}, +                {"label": "7",      "x": 7,  "y": 1}, +                {"label": "8",      "x": 8,  "y": 1}, +                {"label": "9",      "x": 9,  "y": 1}, +                {"label": "0",      "x": 10, "y": 1}, +                {"label": "MINUS",  "x": 11, "y": 1}, +                {"label": "EQUAL",  "x": 12, "y": 1}, +                {"label": "BSPACE", "x": 13, "y": 1, "w": 1.5}, + +                {"label": "TAB",      "x": 0,    "y": 2, "w": 1.5}, +                {"label": "Q",        "x": 1.5,  "y": 2}, +                {"label": "W",        "x": 2.5,  "y": 2}, +                {"label": "E",        "x": 3.5,  "y": 2}, +                {"label": "R",        "x": 4.5,  "y": 2}, +                {"label": "T",        "x": 5.5,  "y": 2}, +                {"label": "Y",        "x": 6.5,  "y": 2}, +                {"label": "U",        "x": 7.5,  "y": 2}, +                {"label": "I",        "x": 8.5,  "y": 2}, +                {"label": "O",        "x": 9.5,  "y": 2}, +                {"label": "P",        "x": 10.5, "y": 2}, +                {"label": "LBRACKET", "x": 11.5, "y": 2}, +                {"label": "RBRACKET", "x": 12.5, "y": 2}, +                {"label": "BSLASH",   "x": 13.5, "y": 2}, + +                {"label": "LCTRL",  "x": 0,  "y": 3}, +                {"label": "APP",    "x": 1,  "y": 3}, +                {"label": "A",      "x": 2,  "y": 3}, +                {"label": "S",      "x": 3,  "y": 3}, +                {"label": "D",      "x": 4,  "y": 3}, +                {"label": "F",      "x": 5,  "y": 3}, +                {"label": "G",      "x": 6,  "y": 3}, +                {"label": "H",      "x": 7,  "y": 3}, +                {"label": "J",      "x": 8,  "y": 3}, +                {"label": "K",      "x": 9,  "y": 3}, +                {"label": "L",      "x": 10, "y": 3}, +                {"label": "SCOLON", "x": 11, "y": 3}, +                {"label": "QUOTE",  "x": 12, "y": 3}, +                {"label": "ENTER",  "x": 13, "y": 3, "w": 1.5}, + +                {"label": "LSHIFT", "x": 0,    "y": 4, "w": 1.5}, +                {"label": "DEL",    "x": 1.5,  "y": 4}, +                {"label": "Z",      "x": 2.5,  "y": 4}, +                {"label": "X",      "x": 3.5,  "y": 4}, +                {"label": "C",      "x": 4.5,  "y": 4}, +                {"label": "V",      "x": 5.5,  "y": 4}, +                {"label": "B",      "x": 6.5,  "y": 4}, +                {"label": "N",      "x": 7.5,  "y": 4}, +                {"label": "M",      "x": 8.5,  "y": 4}, +                {"label": "COMMA",  "x": 9.5,  "y": 4}, +                {"label": "DOT",    "x": 10.5, "y": 4}, +                {"label": "SLASH",  "x": 11.5, "y": 4}, +                {"label": "UP",     "x": 12.5, "y": 4}, +                {"label": "RSHIFT", "x": 13.5, "y": 4}, + +                {"label": "RGUI",    "x": 0,   "y": 5, "w": 1.5}, +                {"label": "LGUI",    "x": 1.5, "y": 5, "w": 1.5}, +                {"label": "RCTRL",   "x": 3,   "y": 5, "w": 1.5}, +                {"label": "SPACE",   "x": 4.5, "y": 5, "w": 1.5}, +                {"label": "LALT",    "x": 6,   "y": 5}, +                {"label": "RALT",    "x": 7,   "y": 5}, +                {"label": "SPACE",   "x": 8,   "y": 5, "w": 1.5}, +                {"label": "PGUP",    "x": 9.5,  "y": 5}, +                {"label": "PGDOWN",  "x": 10.5, "y": 5}, +                {"label": "LEFT",    "x": 11.5, "y": 5}, +                {"label": "DOWN",    "x": 12.5, "y": 5}, +                {"label": "RIGHT",   "x": 13.5, "y": 5}, +            ] +        } +    } +} diff --git a/keyboards/mntre/keymaps/default/keymap.c b/keyboards/mntre/keymaps/default/keymap.c new file mode 100644 index 0000000000..4dcdebe31b --- /dev/null +++ b/keyboards/mntre/keymaps/default/keymap.c @@ -0,0 +1,31 @@ +// Copyright 2021 Cedric Vincent (@cdc-mkb) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { +    _BASE, +    _FN, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +    /* Base */ +    [_BASE] = LAYOUT( +        KC_ESC,    KC_F1,   KC_F2,    KC_F3,    KC_F4,   KC_F5,   KC_F6,    KC_F7,   KC_F8,     KC_F9,    KC_F10,  KC_F11,      KC_F12,      MO(_FN), +        KC_GRAVE,  KC_1,    KC_2,     KC_3,     KC_4,    KC_5,    KC_6,     KC_7,    KC_8,      KC_9,     KC_0,    KC_MINUS,    KC_EQUAL,    KC_BSPACE, +        KC_TAB,    KC_Q,    KC_W,     KC_E,     KC_R,    KC_T,    KC_Y,     KC_U,    KC_I,      KC_O,     KC_P,    KC_LBRACKET, KC_RBRACKET, KC_BSLASH, +        KC_LCTRL,  KC_APP,  KC_A,     KC_S,     KC_D,    KC_F,    KC_G,     KC_H,    KC_J,      KC_K,     KC_L,    KC_SCOLON,   KC_QUOTE,    KC_ENTER, +        KC_LSHIFT, KC_DEL,  KC_Z,     KC_X,     KC_C,    KC_V,    KC_B,     KC_N,    KC_M,      KC_COMMA, KC_DOT,  KC_SLASH,    KC_UP,       KC_RSHIFT, +        KC_RGUI,   KC_LGUI, KC_RCTRL, KC_SPACE, KC_LALT, KC_RALT, KC_SPACE, KC_PGUP, KC_PGDOWN, KC_LEFT,  KC_DOWN, KC_RIGHT +    ), + +    [_FN] = LAYOUT( +        _______, BL_DEC,   BL_INC,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +        _______, _______,  _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, +        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +    ), +}; diff --git a/keyboards/mntre/keymaps/default/readme.md b/keyboards/mntre/keymaps/default/readme.md new file mode 100644 index 0000000000..fecdb68ea4 --- /dev/null +++ b/keyboards/mntre/keymaps/default/readme.md @@ -0,0 +1,19 @@ +# Default layout of MNT Reform USB Keyboard (Standalone) + +This is exactly the same layout as in the original firmware. +Backlight level can be decreased and increased using Fn+F1 and Fn+F2 +respectively. + +  ┏━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━━━━━┓ +  ┃  Esc │  F1  │  F2  │  F3  │  F4  │  F5  │  F6  │  F7  │  F8  │  F9  │  F10 │  F11 │  F12 │    Fn    ┃ +  ┠──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────────┨ +  ┃  `~  │  1!  │  2@  │  3#  │  4$  │  5%  │  6^  │  7&  │  8*  │  9(  │  0)  │  -_  │  =+  │ Backspace┃ +  ┠──────┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──────┨ +  ┃    Tab   │   Q  │   W  │   E  │   R  │   T  │   Y  │   U  │   I  │   O  │   P  │  [{  │  ]}  │  \|  ┃ +  ┠──────┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──────┨ +  ┃ LCtrl│  App │   A  │   S  │   D  │   F  │   G  │   H  │   J  │   K  │   L  │  ;:  │  '"  │   Enter  ┃ +  ┠──────┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──────┨ +  ┃  LShift  │  Del │   Z  │   X  │   C  │   V  │   B  │   N  │   M  │  ,<  │  .>  │  /?  │  Up  │RShift┃ +  ┠──────────┼──────┴──┬───┴──────┼──────┴──┬───┴──┬───┴──┬───┴──────┼──────┼──────┼──────┼──────┼──────┨ +  ┃   RGUI   │   LGUI  │   RCtrl  │  Space  │ LAlt │ RAlt │  Space   │ PgUp │ PgDn │ Left │ Down │ Right┃ +  ┗━━━━━━━━━━┷━━━━━━━━━┷━━━━━━━━━━┷━━━━━━━━━┷━━━━━━┷━━━━━━┷━━━━━━━━━━┷━━━━━━┷━━━━━━┷━━━━━━┷━━━━━━┷━━━━━━┛ diff --git a/keyboards/mntre/mntre.c b/keyboards/mntre/mntre.c new file mode 100644 index 0000000000..c21070b23b --- /dev/null +++ b/keyboards/mntre/mntre.c @@ -0,0 +1,19 @@ +// Copyright 2021 Cedric Vincent (@cdc-mkb) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "mntre.h" + +#ifdef OLED_ENABLE +bool oled_task_kb(void) { +    if (!oled_task_user()) { return false; } + +    static const char PROGMEM qmk_logo[] = { +        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, +        0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, +        0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 +    }; + +    oled_write_P(qmk_logo, false); +    return true; +} +#endif diff --git a/keyboards/mntre/mntre.h b/keyboards/mntre/mntre.h new file mode 100644 index 0000000000..8a48114423 --- /dev/null +++ b/keyboards/mntre/mntre.h @@ -0,0 +1,30 @@ +// Copyright 2021 Cedric Vincent (@cdc-mkb) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ +  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ +  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ +  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ +  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ +  k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, \ +  k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b \ +) { \ +  { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d }, \ +  { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d }, \ +  { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d }, \ +  { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d }, \ +  { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d }, \ +  { k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, KC_NO, KC_NO } \ +} diff --git a/keyboards/mntre/readme.md b/keyboards/mntre/readme.md new file mode 100644 index 0000000000..4c827aeb25 --- /dev/null +++ b/keyboards/mntre/readme.md @@ -0,0 +1,27 @@ +# MNT Reform USB Keyboard (Standalone) + + + +A compact and slim mechanical keyboard designed for comfort and portability. + +* Keyboard QMK port Maintainer: [cdc-mkb](https://github.com/cdc-mkb) +* Hardware Supported: MNT Reform USB Keyboard (Standalone) +* Hardware Availability: https://shop.mntmn.com/products/mnt-reform-usb-keyboard-standalone + +Make example for this keyboard (after setting up your build environment): + +    make mntre:default + +Flashing example for this keyboard: + +    make mntre:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the "Esc" key and plug in the keyboard +* **Keycode in layout**: Press the key mapped to `RESET` if it is available (default: "Circle" + "R") +* **Physical reset button**: Remove the keyboard’s frame and toggle the programming DIP switch SW84 on the keyboard to “ON”.  Then press the reset button SW83. diff --git a/keyboards/mntre/rules.mk b/keyboards/mntre/rules.mk new file mode 100644 index 0000000000..0159e4da7e --- /dev/null +++ b/keyboards/mntre/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +#   change yes to no to disable +# +BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no        # Mouse keys +EXTRAKEY_ENABLE = no        # Audio control and System control +CONSOLE_ENABLE = no         # Console for debug +COMMAND_ENABLE = no         # Commands for debug and configuration +NKRO_ENABLE = no            # Enable N-Key Rollover +BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow +AUDIO_ENABLE = no           # Audio output +OLED_ENABLE = yes +BACKLIGHT_DRIVER = pwm + | 
