diff options
42 files changed, 85 insertions, 100 deletions
| diff --git a/keyboards/adm42/info.json b/keyboards/adm42/info.json index 0ffebff135..14a74f9930 100644 --- a/keyboards/adm42/info.json +++ b/keyboards/adm42/info.json @@ -13,7 +13,8 @@          "pin": "B7"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 24      },      "matrix_pins": {          "cols": ["C6", "B6", "B5", "B4", "D7", "D6", "F0", "F1", "F4", "F5", "F6", "F7"], diff --git a/keyboards/adm42/rev4/config.h b/keyboards/adm42/rev4/config.h index fbf2e300ef..5553b18751 100644 --- a/keyboards/adm42/rev4/config.h +++ b/keyboards/adm42/rev4/config.h @@ -27,10 +27,6 @@  #define RGB_MATRIX_TYPING_HEATMAP_DECREASE_DELAY_MS 20  #define RGB_MATRIX_KEYPRESSES  #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define RGB_MATRIX_SAT_STEP 24 -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_VAL_STEP 16 -#define RGB_MATRIX_SPD_STEP 16  #define ENABLE_RGB_MATRIX_BREATHING  #define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT diff --git a/keyboards/aleblazer/zodiark/config.h b/keyboards/aleblazer/zodiark/config.h index 3c015aa926..7c672db4c8 100644 --- a/keyboards/aleblazer/zodiark/config.h +++ b/keyboards/aleblazer/zodiark/config.h @@ -40,8 +40,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.  #define RGB_MATRIX_KEYPRESSES  #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_SAT_STEP 8 -#define RGB_MATRIX_VAL_STEP 8 -#define RGB_MATRIX_SPD_STEP 10  #endif diff --git a/keyboards/aleblazer/zodiark/info.json b/keyboards/aleblazer/zodiark/info.json index c014385a97..af1f6cdcef 100644 --- a/keyboards/aleblazer/zodiark/info.json +++ b/keyboards/aleblazer/zodiark/info.json @@ -17,7 +17,10 @@          "split_count": [34, 34]      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "matrix_pins": {          "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"], diff --git a/keyboards/basekeys/trifecta/config.h b/keyboards/basekeys/trifecta/config.h index 9ad471915f..26e0e59795 100644 --- a/keyboards/basekeys/trifecta/config.h +++ b/keyboards/basekeys/trifecta/config.h @@ -52,10 +52,6 @@  #   define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)  #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)  #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -#    define RGB_MATRIX_HUE_STEP 8 -#    define RGB_MATRIX_SAT_STEP 8 -#    define RGB_MATRIX_VAL_STEP 8 -#    define RGB_MATRIX_SPD_STEP 10  /* Disable the animations you don't want/need.  You will need to disable a good number of these    *   * because they take up a lot of space.  Disable until you can successfully compile your firmware. */ diff --git a/keyboards/basekeys/trifecta/info.json b/keyboards/basekeys/trifecta/info.json index cb3126f521..f16ef52201 100644 --- a/keyboards/basekeys/trifecta/info.json +++ b/keyboards/basekeys/trifecta/info.json @@ -30,6 +30,11 @@          "led_count": 80,          "max_brightness": 128      }, +    "rgb_matrix": { +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10 +    },      "processor": "atmega32u4",      "bootloader": "atmel-dfu",     "layouts": { diff --git a/keyboards/blockboy/ac980mini/config.h b/keyboards/blockboy/ac980mini/config.h index e9b841acbe..b98cb7964f 100644 --- a/keyboards/blockboy/ac980mini/config.h +++ b/keyboards/blockboy/ac980mini/config.h @@ -15,10 +15,6 @@  // #   define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)  // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)  #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.  -#    define RGB_MATRIX_HUE_STEP 8 -#    define RGB_MATRIX_SAT_STEP 8 -#    define RGB_MATRIX_VAL_STEP 8 -#    define RGB_MATRIX_SPD_STEP 10  /* Enable the animations you want/need.  You may need to enable only a small number of these because       *   * they take up a lot of space.  Enable and confirm that you can still successfully compile your firmware. */ diff --git a/keyboards/blockboy/ac980mini/info.json b/keyboards/blockboy/ac980mini/info.json index c754176824..1134d36aeb 100644 --- a/keyboards/blockboy/ac980mini/info.json +++ b/keyboards/blockboy/ac980mini/info.json @@ -19,7 +19,10 @@          "pin": "B7"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "layouts": {          "LAYOUT": { diff --git a/keyboards/checkerboards/quark_lp/config.h b/keyboards/checkerboards/quark_lp/config.h index 383ae5c133..ca124775d7 100644 --- a/keyboards/checkerboards/quark_lp/config.h +++ b/keyboards/checkerboards/quark_lp/config.h @@ -27,10 +27,6 @@  #define RGB_MATRIX_KEYPRESSES // reacts to keypresses  #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 125 // limits maximum brightness of LEDs to 125 out of 255. Higher may cause the controller to crash. -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_SAT_STEP 8 -#define RGB_MATRIX_VAL_STEP 8 -#define RGB_MATRIX_SPD_STEP 10  // RGB Matrix Animation modes. Explicitly enabled  // For full list of effects, see: diff --git a/keyboards/checkerboards/quark_lp/info.json b/keyboards/checkerboards/quark_lp/info.json index 1dee17b95f..201de629da 100644 --- a/keyboards/checkerboards/quark_lp/info.json +++ b/keyboards/checkerboards/quark_lp/info.json @@ -12,7 +12,10 @@          "pin": "C2"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "matrix_pins": {          "cols": ["B6", "B5", "B4", "B3", "B0", "D6", "D5", "D4", "D3", "D2", "D1", "D0"], diff --git a/keyboards/elephant42/config.h b/keyboards/elephant42/config.h index 60f5551a3b..0b24b63466 100644 --- a/keyboards/elephant42/config.h +++ b/keyboards/elephant42/config.h @@ -36,10 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.  #    define RGB_MATRIX_LED_COUNT 54  #    define RGB_MATRIX_SPLIT { 27, 27 }  #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170 -#    define RGB_MATRIX_HUE_STEP RGBLIGHT_HUE_STEP -#    define RGB_MATRIX_SAT_STEP RGBLIGHT_SAT_STEP -#    define RGB_MATRIX_VAL_STEP RGBLIGHT_VAL_STEP -#    define RGB_MATRIX_SPD_STEP 8  #endif  #ifndef OLED_FONT_H diff --git a/keyboards/elephant42/info.json b/keyboards/elephant42/info.json index 341d197332..4c565f5327 100644 --- a/keyboards/elephant42/info.json +++ b/keyboards/elephant42/info.json @@ -9,7 +9,10 @@          "device_version": "0.0.1"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 8      },      "rgblight": {          "led_count": 54, diff --git a/keyboards/helix/rev3_4rows/config.h b/keyboards/helix/rev3_4rows/config.h index 673e9f1ed8..3598563ab0 100644 --- a/keyboards/helix/rev3_4rows/config.h +++ b/keyboards/helix/rev3_4rows/config.h @@ -55,10 +55,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.  // #   define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)  // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)  #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -#    define RGB_MATRIX_HUE_STEP 8 -#    define RGB_MATRIX_SAT_STEP 8 -#    define RGB_MATRIX_VAL_STEP 8 -#    define RGB_MATRIX_SPD_STEP 10  #endif  #ifdef RGBLIGHT_ENABLE diff --git a/keyboards/helix/rev3_4rows/info.json b/keyboards/helix/rev3_4rows/info.json index 25a0a5a041..7c8042bb5e 100644 --- a/keyboards/helix/rev3_4rows/info.json +++ b/keyboards/helix/rev3_4rows/info.json @@ -9,7 +9,10 @@      "device_version": "0.0.1"    },    "rgb_matrix": { -    "driver": "WS2812" +    "driver": "WS2812", +    "sat_steps": 8, +    "val_steps": 8, +    "speed_steps": 10    },    "encoder": {      "rotary": [ diff --git a/keyboards/helix/rev3_5rows/config.h b/keyboards/helix/rev3_5rows/config.h index c1def15db6..f40999c1f7 100644 --- a/keyboards/helix/rev3_5rows/config.h +++ b/keyboards/helix/rev3_5rows/config.h @@ -55,10 +55,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.  // #   define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)  // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)  #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -#    define RGB_MATRIX_HUE_STEP 8 -#    define RGB_MATRIX_SAT_STEP 8 -#    define RGB_MATRIX_VAL_STEP 8 -#    define RGB_MATRIX_SPD_STEP 10  #endif  #ifdef RGBLIGHT_ENABLE diff --git a/keyboards/helix/rev3_5rows/info.json b/keyboards/helix/rev3_5rows/info.json index d659a879a6..12a4b618e2 100644 --- a/keyboards/helix/rev3_5rows/info.json +++ b/keyboards/helix/rev3_5rows/info.json @@ -9,7 +9,10 @@      "device_version": "0.0.1"    },    "rgb_matrix": { -    "driver": "WS2812" +    "driver": "WS2812", +    "sat_steps": 8, +    "val_steps": 8, +    "speed_steps": 10    },    "encoder": {      "rotary": [ diff --git a/keyboards/kapl/rev1/config.h b/keyboards/kapl/rev1/config.h index e63f8b8602..d8a87f0784 100644 --- a/keyboards/kapl/rev1/config.h +++ b/keyboards/kapl/rev1/config.h @@ -23,10 +23,6 @@  #endif  #ifdef RGB_MATRIX_ENABLE -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_SAT_STEP 16 -#define RGB_MATRIX_VAL_STEP 16 -#define RGB_MATRIX_SPD_STEP 10  // EFFECTS  #define ENABLE_RGB_MATRIX_ALPHAS_MODS  #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN diff --git a/keyboards/kapl/rev1/info.json b/keyboards/kapl/rev1/info.json index d94c146765..eb12b78274 100644 --- a/keyboards/kapl/rev1/info.json +++ b/keyboards/kapl/rev1/info.json @@ -12,7 +12,8 @@      "pin": "D4"    },    "rgb_matrix": { -    "driver": "WS2812" +    "driver": "WS2812", +    "speed_steps": 10    },    "rgblight": {      "led_count": 88, diff --git a/keyboards/kbdfans/baguette66/rgb/config.h b/keyboards/kbdfans/baguette66/rgb/config.h index c495f44266..78802b19f9 100644 --- a/keyboards/kbdfans/baguette66/rgb/config.h +++ b/keyboards/kbdfans/baguette66/rgb/config.h @@ -61,7 +61,3 @@  #define RGB_MATRIX_FRAMEBUFFER_EFFECTS  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.  #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_SAT_STEP 8 -#define RGB_MATRIX_VAL_STEP 8 -#define RGB_MATRIX_SPD_STEP 10 diff --git a/keyboards/kbdfans/baguette66/rgb/info.json b/keyboards/kbdfans/baguette66/rgb/info.json index 32a661a70b..9ac27f950a 100644 --- a/keyboards/kbdfans/baguette66/rgb/info.json +++ b/keyboards/kbdfans/baguette66/rgb/info.json @@ -14,7 +14,10 @@          "pin": "E6"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "matrix_pins": {          "cols": ["C6", "C7", "F7", "F6", "B0", "B1", "B2", "B3", "D0", "D1", "D2", "D3", "D5", "D4", "D6"], diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v4/config.h b/keyboards/kbdfans/kbd67/mkiirgb/v4/config.h index 317453e45a..2b06b9c43c 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v4/config.h +++ b/keyboards/kbdfans/kbd67/mkiirgb/v4/config.h @@ -36,10 +36,6 @@  #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS  #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.  #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL -#    define RGB_MATRIX_HUE_STEP 8 -#    define RGB_MATRIX_SAT_STEP 8 -#    define RGB_MATRIX_VAL_STEP 8 -#    define RGB_MATRIX_SPD_STEP 10  // RGB Matrix Animation modes. Explicitly enabled  // For full list of effects, see:  // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v4/info.json b/keyboards/kbdfans/kbd67/mkiirgb/v4/info.json index a2e2618c81..f66a39d799 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v4/info.json +++ b/keyboards/kbdfans/kbd67/mkiirgb/v4/info.json @@ -11,7 +11,10 @@          "pin": "C7"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "matrix_pins": {          "cols": ["F7", "F6", "F5", "F4", "B0", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4"], diff --git a/keyboards/kbdfans/kbd67/mkiirgb_iso/config.h b/keyboards/kbdfans/kbd67/mkiirgb_iso/config.h index ede122f3f2..10f0bc0ec2 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb_iso/config.h +++ b/keyboards/kbdfans/kbd67/mkiirgb_iso/config.h @@ -26,10 +26,6 @@  #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS  #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.  #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL -#    define RGB_MATRIX_HUE_STEP 8 -#    define RGB_MATRIX_SAT_STEP 8 -#    define RGB_MATRIX_VAL_STEP 8 -#    define RGB_MATRIX_SPD_STEP 10  // RGB Matrix Animation modes. Explicitly enabled  // For full list of effects, see:  // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects diff --git a/keyboards/kbdfans/kbd67/mkiirgb_iso/info.json b/keyboards/kbdfans/kbd67/mkiirgb_iso/info.json index 4c7d09aa8e..222742ed8f 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb_iso/info.json +++ b/keyboards/kbdfans/kbd67/mkiirgb_iso/info.json @@ -12,7 +12,10 @@          "pin": "C7"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "matrix_pins": {          "cols": ["F7", "F6", "F5", "F4", "B0", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4"], diff --git a/keyboards/kbdfans/kbd75rgb/config.h b/keyboards/kbdfans/kbd75rgb/config.h index 08555f63d1..6a93d118d6 100644 --- a/keyboards/kbdfans/kbd75rgb/config.h +++ b/keyboards/kbdfans/kbd75rgb/config.h @@ -61,7 +61,3 @@  #define RGB_MATRIX_FRAMEBUFFER_EFFECTS  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.  #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_SAT_STEP 8 -#define RGB_MATRIX_VAL_STEP 8 -#define RGB_MATRIX_SPD_STEP 10 diff --git a/keyboards/kbdfans/kbd75rgb/info.json b/keyboards/kbdfans/kbd75rgb/info.json index e5b6f980d3..bf2f596f3a 100644 --- a/keyboards/kbdfans/kbd75rgb/info.json +++ b/keyboards/kbdfans/kbd75rgb/info.json @@ -15,7 +15,10 @@          "pin": "C7"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "matrix_pins": {          "cols": ["F7", "F6", "F5", "F4", "E6", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7"], diff --git a/keyboards/marksard/rhymestone/rev1/config.h b/keyboards/marksard/rhymestone/rev1/config.h index aca844bff7..9e438197fc 100644 --- a/keyboards/marksard/rhymestone/rev1/config.h +++ b/keyboards/marksard/rhymestone/rev1/config.h @@ -40,10 +40,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.    // #define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)    // #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)    #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 -  #define RGB_MATRIX_HUE_STEP 8 -  #define RGB_MATRIX_SAT_STEP 8 -  #define RGB_MATRIX_VAL_STEP 8 -  #define RGB_MATRIX_SPD_STEP 10  //   #undef ENABLE_RGB_MATRIX_ALPHAS_MODS  //   #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN diff --git a/keyboards/marksard/rhymestone/rev1/info.json b/keyboards/marksard/rhymestone/rev1/info.json index 45e5489c99..35691b9a0b 100644 --- a/keyboards/marksard/rhymestone/rev1/info.json +++ b/keyboards/marksard/rhymestone/rev1/info.json @@ -9,7 +9,10 @@          "device_version": "0.2.0"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "matrix_pins": {          "cols": ["D4", "C6", "D7", "E6", "B4"], diff --git a/keyboards/nack/config.h b/keyboards/nack/config.h index 219494fc63..adb2cf5d87 100644 --- a/keyboards/nack/config.h +++ b/keyboards/nack/config.h @@ -23,9 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.      #define RGB_MATRIX_LED_COUNT 52      #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 128 // Max brightness of LEDs      #define RGB_MATRIX_DEFAULT_VAL 64 -    #define RGB_MATRIX_HUE_STEP 10 -    #define RGB_MATRIX_SAT_STEP 10 -    #define RGB_MATRIX_VAL_STEP 10  // RGB Matrix Animation modes. Explicitly enabled  // For full list of effects, see:  // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects diff --git a/keyboards/nack/info.json b/keyboards/nack/info.json index 99d5844431..0c65f81961 100644 --- a/keyboards/nack/info.json +++ b/keyboards/nack/info.json @@ -13,7 +13,10 @@          "driver": "spi"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "hue_steps": 10, +        "sat_steps": 10, +        "val_steps": 10      },      "matrix_pins": {          "cols": ["A6", "A7", "A8", "A9", "A10", "B0", "B1", "B2", "B6", "B7", "C13", "C14", "C15"], diff --git a/keyboards/quarkeys/z40/config.h b/keyboards/quarkeys/z40/config.h index d50067ed98..a81cf5f708 100644 --- a/keyboards/quarkeys/z40/config.h +++ b/keyboards/quarkeys/z40/config.h @@ -20,9 +20,6 @@  #define RGB_MATRIX_FRAMEBUFFER_EFFECTS  #define RGB_DISABLE_WHEN_USB_SUSPENDED              // Turn off effects when suspended  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 130           // Limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -#define RGB_MATRIX_SAT_STEP 8 -#define RGB_MATRIX_VAL_STEP 8 -#define RGB_MATRIX_SPD_STEP 10  // RGB_MATRIX effects  #define ENABLE_RGB_MATRIX_ALPHAS_MODS 	            //Enables RGB_MATRIX_ALPHAS_MODS diff --git a/keyboards/quarkeys/z40/info.json b/keyboards/quarkeys/z40/info.json index bfa8da31dc..46f7be36d8 100644 --- a/keyboards/quarkeys/z40/info.json +++ b/keyboards/quarkeys/z40/info.json @@ -9,7 +9,10 @@          "device_version": "0.0.1"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "rgblight": {          "led_count": 47, diff --git a/keyboards/silverbullet44/config.h b/keyboards/silverbullet44/config.h index 437b5d9b37..290d5f510b 100644 --- a/keyboards/silverbullet44/config.h +++ b/keyboards/silverbullet44/config.h @@ -23,11 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.      #define RGB_MATRIX_LED_COUNT 52      #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 -    #define RGB_MATRIX_HUE_STEP 8 -    #define RGB_MATRIX_SAT_STEP 8 -    #define RGB_MATRIX_VAL_STEP 8 -    #define RGB_MATRIX_SPD_STEP 8 -      #define RGB_MATRIX_FRAMEBUFFER_EFFECTS      #define RGB_MATRIX_KEYPRESSES  // reacts to keypresses diff --git a/keyboards/silverbullet44/info.json b/keyboards/silverbullet44/info.json index 778d722874..241c8a688a 100644 --- a/keyboards/silverbullet44/info.json +++ b/keyboards/silverbullet44/info.json @@ -12,7 +12,10 @@          "pin": "D3"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 8      },      "rgblight": {          "led_count": 52, diff --git a/keyboards/tominabox1/le_chiffre/config.h b/keyboards/tominabox1/le_chiffre/config.h index bc1950aefe..c4ae5fc38b 100644 --- a/keyboards/tominabox1/le_chiffre/config.h +++ b/keyboards/tominabox1/le_chiffre/config.h @@ -42,8 +42,4 @@  #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended  #define RGB_MATRIX_FRAMEBUFFER_EFFECTS  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -#define RGB_MATRIX_HUE_STEP 8 -#define RGB_MATRIX_SAT_STEP 8 -#define RGB_MATRIX_VAL_STEP 8 -#define RGB_MATRIX_SPD_STEP 10  #endif diff --git a/keyboards/tominabox1/le_chiffre/he/info.json b/keyboards/tominabox1/le_chiffre/he/info.json index 8c8e7f5b09..b4c02bf0e1 100644 --- a/keyboards/tominabox1/le_chiffre/he/info.json +++ b/keyboards/tominabox1/le_chiffre/he/info.json @@ -19,7 +19,10 @@          ]      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "processor": "atmega32u4",      "bootloader": "atmel-dfu", diff --git a/keyboards/tominabox1/le_chiffre/rev1/info.json b/keyboards/tominabox1/le_chiffre/rev1/info.json index 32e08029d5..73b6f435a7 100644 --- a/keyboards/tominabox1/le_chiffre/rev1/info.json +++ b/keyboards/tominabox1/le_chiffre/rev1/info.json @@ -19,7 +19,10 @@          ]      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "processor": "atmega32u4",      "bootloader": "atmel-dfu", diff --git a/keyboards/tominabox1/le_chiffre/rev2/info.json b/keyboards/tominabox1/le_chiffre/rev2/info.json index 0dd86e5848..44dcfdf728 100644 --- a/keyboards/tominabox1/le_chiffre/rev2/info.json +++ b/keyboards/tominabox1/le_chiffre/rev2/info.json @@ -19,7 +19,10 @@          ]      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "processor": "atmega32u4",      "bootloader": "atmel-dfu", diff --git a/keyboards/ungodly/launch_pad/config.h b/keyboards/ungodly/launch_pad/config.h index 5505279b1b..f3431bd412 100644 --- a/keyboards/ungodly/launch_pad/config.h +++ b/keyboards/ungodly/launch_pad/config.h @@ -29,10 +29,6 @@  // #    define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)  // #    define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)  #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50  // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -#    define RGB_MATRIX_HUE_STEP 8 -#    define RGB_MATRIX_SAT_STEP 8 -#    define RGB_MATRIX_VAL_STEP 8 -#    define RGB_MATRIX_SPD_STEP 10  #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_PINWHEEL  // default mode  // RGB Matrix Animation modes. Explicitly enabled diff --git a/keyboards/ungodly/launch_pad/info.json b/keyboards/ungodly/launch_pad/info.json index 97f3d10407..c94b2eb1c9 100644 --- a/keyboards/ungodly/launch_pad/info.json +++ b/keyboards/ungodly/launch_pad/info.json @@ -9,7 +9,10 @@      "device_version": "99.9.9"    },    "rgb_matrix": { -    "driver": "WS2812" +    "driver": "WS2812", +    "sat_steps": 8, +    "val_steps": 8, +    "speed_steps": 10    },    "matrix_pins": {      "cols": ["B0", "B1", "B2", "B3"], diff --git a/keyboards/yushakobo/quick17/config.h b/keyboards/yushakobo/quick17/config.h index a81fbb0dbe..cde3298fad 100644 --- a/keyboards/yushakobo/quick17/config.h +++ b/keyboards/yushakobo/quick17/config.h @@ -30,10 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.  //        #define RGB_MATRIX_DEFAULT_HUE 128  //        #define RGB_MATRIX_DEFAULT_SAT 255          #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS -#    define RGB_MATRIX_HUE_STEP 8 -#    define RGB_MATRIX_SAT_STEP 8 -#    define RGB_MATRIX_VAL_STEP 8 -#    define RGB_MATRIX_SPD_STEP 10  #endif diff --git a/keyboards/yushakobo/quick17/info.json b/keyboards/yushakobo/quick17/info.json index 3a0391dafd..564ef75a56 100644 --- a/keyboards/yushakobo/quick17/info.json +++ b/keyboards/yushakobo/quick17/info.json @@ -9,7 +9,10 @@          "device_version": "0.0.1"      },      "rgb_matrix": { -        "driver": "WS2812" +        "driver": "WS2812", +        "sat_steps": 8, +        "val_steps": 8, +        "speed_steps": 10      },      "rgblight": {          "led_count": 18, | 
