diff options
| -rw-r--r-- | keyboards/atreus62/Makefile | 3 | ||||
| -rw-r--r-- | keyboards/atreus62/atreus62.c | 1 | ||||
| -rw-r--r-- | keyboards/atreus62/atreus62.h | 26 | ||||
| -rw-r--r-- | keyboards/atreus62/config.h | 83 | ||||
| -rw-r--r-- | keyboards/atreus62/keymaps/default/keymap.c | 71 | ||||
| -rw-r--r-- | keyboards/atreus62/pro_micro.h | 362 | ||||
| -rw-r--r-- | keyboards/atreus62/readme.md | 10 | ||||
| -rw-r--r-- | keyboards/atreus62/rules.mk | 66 | ||||
| -rw-r--r-- | keyboards/ergodox/infinity/infinity.c | 6 | ||||
| -rw-r--r-- | keyboards/ergodox/infinity/led.c | 25 | ||||
| -rw-r--r-- | keyboards/ergodox/keymaps/galson/Makefile | 2 | ||||
| -rw-r--r-- | keyboards/ergodox/keymaps/galson/keymap.c | 183 | ||||
| -rw-r--r-- | keyboards/ergodox/keymaps/galson/readme.md | 11 | ||||
| -rw-r--r-- | keyboards/maxipad/config.h | 12 | ||||
| -rw-r--r-- | keyboards/maxipad/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/maxipad/rules.mk | 2 | ||||
| -rw-r--r-- | quantum/quantum.c | 11 | 
17 files changed, 844 insertions, 32 deletions
| diff --git a/keyboards/atreus62/Makefile b/keyboards/atreus62/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/atreus62/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED +	include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/atreus62/atreus62.c b/keyboards/atreus62/atreus62.c new file mode 100644 index 0000000000..ba5bce9899 --- /dev/null +++ b/keyboards/atreus62/atreus62.c @@ -0,0 +1 @@ +#include "atreus62.h"
\ No newline at end of file diff --git a/keyboards/atreus62/atreus62.h b/keyboards/atreus62/atreus62.h new file mode 100644 index 0000000000..eacf5b4513 --- /dev/null +++ b/keyboards/atreus62/atreus62.h @@ -0,0 +1,26 @@ +#ifndef ATREUS62_H +#define ATREUS62_H + +#include "quantum.h" + +void promicro_bootloader_jmp(bool program); + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ +  k00, k01, k02, k03, k04, k05,           k06, k07, k08, k09, k0a, k0b, \ +  k10, k11, k12, k13, k14, k15,           k16, k17, k18, k19, k1a, k1b, \ +  k20, k21, k22, k23, k24, k25,           k26, k27, k28, k29, k2a, k2b, \ +  k30, k31, k32, k33, k34, k35,           k36, k37, k38, k39, k3a, k3b, \ +  k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \ +) \ +{ \ +	{ k00, k01, k02, k03, k04, k05, KC_NO, k06, k07, k08, k09, k0a, k0b }, \ +	{ k10, k11, k12, k13, k14, k15, KC_NO, k16, k17, k18, k19, k1a, k1b }, \ +	{ k20, k21, k22, k23, k24, k25, KC_NO, k26, k27, k28, k29, k2a, k2b }, \ +	{ k30, k31, k32, k33, k34, k35, k46,   k36, k37, k38, k39, k3a, k3b }, \ +	{ k40, k41, k42, k43, k44, k45, k47,   k48, k49, k4a, k4b, k4c, k4d } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/atreus62/config.h b/keyboards/atreus62/config.h new file mode 100644 index 0000000000..90a4aa05a6 --- /dev/null +++ b/keyboards/atreus62/config.h @@ -0,0 +1,83 @@ +/* +Copyright 2012 Jun Wako <[email protected]> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program.  If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID       0xFEED +#define PRODUCT_ID      0x6062 +#define DEVICE_VER      0x0001 +#define MANUFACTURER    Profet +#define PRODUCT         Atreus62 +#define DESCRIPTION     q.m.k. keyboard firmware for Atreus62 + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 5 +#define MATRIX_COLS 13 + +// wiring of each half +#define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, C6 } + +#define CATERINA_BOOTLOADER + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ +    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + *  These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/atreus62/keymaps/default/keymap.c b/keyboards/atreus62/keymaps/default/keymap.c new file mode 100644 index 0000000000..52802c77b7 --- /dev/null +++ b/keyboards/atreus62/keymaps/default/keymap.c @@ -0,0 +1,71 @@ +// this is the style you want to emulate. +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, + +#include "atreus62.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DEFAULT 0 +#define _NAV 1 +#define _RESET 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_DEFAULT] = { /* qwerty */ +		{ KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_TRNS,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS }, +		{ KC_BSLS,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_TRNS,  KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_RBRC }, +		{ KC_TAB,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_TRNS,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT }, +		{ KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_DELT,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LBRC }, +		{ KC_LCTL,  KC_LGUI, KC_LALT, KC_GRV,  MO(_NAV),KC_BSPC, KC_ENT,   KC_SPC,  KC_EQL,  KC_MINS, KC_QUOT, KC_ENT,  KC_RGUI } +}, + +[_NAV] = {  +		{ TO(_DEFAULT),  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_TRNS,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11  }, +		{ KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_F12,  KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS }, +		{ KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS }, +		{ TO(_RESET),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, +		{ KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS } +}, + +[_RESET] = { +		{ TO(_DEFAULT),  KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  ,  KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO   }, +		{ KC_NO  ,       KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  ,  KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO   }, +		{ KC_NO  ,       KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  ,  KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO   }, +		{ KC_NO  ,       KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  ,  KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO   }, +		{ KC_NO  ,       KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  ,  KC_NO  , KC_NO  , KC_NO  , KC_NO  , KC_NO  , RESET } +} + + +/* +[_TRNS] = { +		{ KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, +		{ KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, +		{ KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, +		{ KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, +		{ KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS } +}, +*/ +}; + + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ +	// MACRODOWN only works in this function +	switch (id) { +	case 0: +		if (record->event.pressed) { +			register_code(KC_RSFT); +		} +		else { +			unregister_code(KC_RSFT); +		} +		break; +	} +	return MACRO_NONE; +}; diff --git a/keyboards/atreus62/pro_micro.h b/keyboards/atreus62/pro_micro.h new file mode 100644 index 0000000000..f9e7ed75d9 --- /dev/null +++ b/keyboards/atreus62/pro_micro.h @@ -0,0 +1,362 @@ +/* +  pins_arduino.h - Pin definition functions for Arduino +  Part of Arduino - http://www.arduino.cc/ + +  Copyright (c) 2007 David A. Mellis + +  This library is free software; you can redistribute it and/or +  modify it under the terms of the GNU Lesser General Public +  License as published by the Free Software Foundation; either +  version 2.1 of the License, or (at your option) any later version. + +  This library is distributed in the hope that it will be useful, +  but WITHOUT ANY WARRANTY; without even the implied warranty of +  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU +  Lesser General Public License for more details. + +  You should have received a copy of the GNU Lesser General +  Public License along with this library; if not, write to the +  Free Software Foundation, Inc., 59 Temple Place, Suite 330, +  Boston, MA  02111-1307  USA + +  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include <avr/pgmspace.h> + +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS  30 +#define NUM_ANALOG_INPUTS 12 + +#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0) +#define TXLED0          PORTD |= (1<<5) +#define TXLED1          PORTD &= ~(1<<5) +#define RXLED0          PORTB |= (1<<0) +#define RXLED1          PORTB &= ~(1<<0) + +static const uint8_t SDA = 2; +static const uint8_t SCL = 3; +#define LED_BUILTIN 13 + +// Map SPI port to 'new' pins D14..D17 +static const uint8_t SS   = 17; +static const uint8_t MOSI = 16; +static const uint8_t MISO = 14; +static const uint8_t SCK  = 15; + +// Mapping of analog pins as digital I/O +// A6-A11 share with digital pins +static const uint8_t ADC0 = 18; +static const uint8_t ADC1 = 19; +static const uint8_t ADC2 = 20; +static const uint8_t ADC3 = 21; +static const uint8_t ADC4 = 22; +static const uint8_t ADC5 = 23; +static const uint8_t ADC6 = 24;   // D4 +static const uint8_t ADC7 = 25;   // D6 +static const uint8_t ADC8 = 26;   // D8 +static const uint8_t ADC9 = 27;   // D9 +static const uint8_t ADC10 = 28;  // D10 +static const uint8_t ADC11 = 29;  // D12 + +#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) 0 +#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) + +//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels +extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; +#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + +#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM).  Analog input +// pins are a separate set. + +// ATMEL ATMEGA32U4 / ARDUINO LEONARDO +// +// D0               PD2                 RXD1/INT2 +// D1               PD3                 TXD1/INT3 +// D2               PD1     SDA         SDA/INT1 +// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0 +// D4       A6      PD4                 ADC8 +// D5#              PC6     ???         OC3A/#OC4A +// D6#      A7      PD7     FastPWM     #OC4D/ADC10 +// D7               PE6                 INT6/AIN0 +// +// D8       A8      PB4                 ADC11/PCINT4 +// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5 +// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6 +// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7 +// D12      A11     PD6                 T1/#OC4D/ADC9 +// D13#             PC7     PWM10       CLK0/OC4A +// +// A0       D18     PF7                 ADC7 +// A1       D19     PF6                 ADC6 +// A2       D20     PF5                 ADC5 +// A3       D21     PF4                 ADC4 +// A4       D22     PF1                 ADC1 +// A5       D23     PF0                 ADC0 +// +// New pins D14..D17 to map SPI port to digital pins +// +// MISO     D14     PB3                 MISO,PCINT3 +// SCK      D15     PB1                 SCK,PCINT1 +// MOSI     D16     PB2                 MOSI,PCINT2 +// SS       D17     PB0                 RXLED,SS/PCINT0 +// +// Connected LEDs on board for TX and RX +// TXLED    D24     PD5                 XCK1 +// RXLED    D17     PB0 +// HWB              PE2                 HWB + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { +    NOT_A_PORT, +    NOT_A_PORT, +    (uint16_t) &DDRB, +    (uint16_t) &DDRC, +    (uint16_t) &DDRD, +    (uint16_t) &DDRE, +    (uint16_t) &DDRF, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { +    NOT_A_PORT, +    NOT_A_PORT, +    (uint16_t) &PORTB, +    (uint16_t) &PORTC, +    (uint16_t) &PORTD, +    (uint16_t) &PORTE, +    (uint16_t) &PORTF, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { +    NOT_A_PORT, +    NOT_A_PORT, +    (uint16_t) &PINB, +    (uint16_t) &PINC, +    (uint16_t) &PIND, +    (uint16_t) &PINE, +    (uint16_t) &PINF, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { +    PD, // D0 - PD2 +    PD, // D1 - PD3 +    PD, // D2 - PD1 +    PD, // D3 - PD0 +    PD, // D4 - PD4 +    PC, // D5 - PC6 +    PD, // D6 - PD7 +    PE, // D7 - PE6 + +    PB, // D8 - PB4 +    PB, // D9 - PB5 +    PB, // D10 - PB6 +    PB, // D11 - PB7 +    PD, // D12 - PD6 +    PC, // D13 - PC7 + +    PB, // D14 - MISO - PB3 +    PB, // D15 - SCK - PB1 +    PB, // D16 - MOSI - PB2 +    PB, // D17 - SS - PB0 + +    PF, // D18 - A0 - PF7 +    PF, // D19 - A1 - PF6 +    PF, // D20 - A2 - PF5 +    PF, // D21 - A3 - PF4 +    PF, // D22 - A4 - PF1 +    PF, // D23 - A5 - PF0 + +    PD, // D24 - PD5 +    PD, // D25 / D6 - A7 - PD7 +    PB, // D26 / D8 - A8 - PB4 +    PB, // D27 / D9 - A9 - PB5 +    PB, // D28 / D10 - A10 - PB6 +    PD, // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { +    _BV(2), // D0 - PD2 +    _BV(3), // D1 - PD3 +    _BV(1), // D2 - PD1 +    _BV(0), // D3 - PD0 +    _BV(4), // D4 - PD4 +    _BV(6), // D5 - PC6 +    _BV(7), // D6 - PD7 +    _BV(6), // D7 - PE6 + +    _BV(4), // D8 - PB4 +    _BV(5), // D9 - PB5 +    _BV(6), // D10 - PB6 +    _BV(7), // D11 - PB7 +    _BV(6), // D12 - PD6 +    _BV(7), // D13 - PC7 + +    _BV(3), // D14 - MISO - PB3 +    _BV(1), // D15 - SCK - PB1 +    _BV(2), // D16 - MOSI - PB2 +    _BV(0), // D17 - SS - PB0 + +    _BV(7), // D18 - A0 - PF7 +    _BV(6), // D19 - A1 - PF6 +    _BV(5), // D20 - A2 - PF5 +    _BV(4), // D21 - A3 - PF4 +    _BV(1), // D22 - A4 - PF1 +    _BV(0), // D23 - A5 - PF0 + +    _BV(5), // D24 - PD5 +    _BV(7), // D25 / D6 - A7 - PD7 +    _BV(4), // D26 / D8 - A8 - PB4 +    _BV(5), // D27 / D9 - A9 - PB5 +    _BV(6), // D28 / D10 - A10 - PB6 +    _BV(6), // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    TIMER0B,        /* 3 */ +    NOT_ON_TIMER, +    TIMER3A,        /* 5 */ +    TIMER4D,        /* 6 */ +    NOT_ON_TIMER, + +    NOT_ON_TIMER, +    TIMER1A,        /* 9 */ +    TIMER1B,        /* 10 */ +    TIMER0A,        /* 11 */ + +    NOT_ON_TIMER, +    TIMER4A,        /* 13 */ + +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, + +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, +    NOT_ON_TIMER, +}; + +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { +    7,  // A0               PF7                 ADC7 +    6,  // A1               PF6                 ADC6 +    5,  // A2               PF5                 ADC5 +    4,  // A3               PF4                 ADC4 +    1,  // A4               PF1                 ADC1 +    0,  // A5               PF0                 ADC0 +    8,  // A6       D4      PD4                 ADC8 +    10, // A7       D6      PD7                 ADC10 +    11, // A8       D8      PB4                 ADC11 +    12, // A9       D9      PB5                 ADC12 +    13, // A10      D10     PB6                 ADC13 +    9   // A11      D12     PD6                 ADC9 +}; + +#endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX +//                            pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR        Serial +#define SERIAL_PORT_USBVIRTUAL     Serial +#define SERIAL_PORT_HARDWARE       Serial1 +#define SERIAL_PORT_HARDWARE_OPEN  Serial1 + +#endif /* Pins_Arduino_h */ diff --git a/keyboards/atreus62/readme.md b/keyboards/atreus62/readme.md new file mode 100644 index 0000000000..0245b4f9f0 --- /dev/null +++ b/keyboards/atreus62/readme.md @@ -0,0 +1,10 @@ +atreus62 keyboard firmware +====================== + +This firmware is for the atreus62 keyboard. + +This version utilizes a Pro Micro for its controller and has a 62 key layout. + +https://github.com/profet23/atreus62 + +TODO: More information
\ No newline at end of file diff --git a/keyboards/atreus62/rules.mk b/keyboards/atreus62/rules.mk new file mode 100644 index 0000000000..f5d0be23ac --- /dev/null +++ b/keyboards/atreus62/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +#     This will define a symbol, F_CPU, in all source code files equal to the +#     processor frequency in Hz. You can then use this symbol in your source code to +#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done +#     automatically to create a 32-bit value in your source code. +# +#     This will be an integer division of F_USB below, as it is sourced by +#     F_USB after it has run through any CPU prescalers. Note that this value +#     does not *change* the processor frequency - it should merely be updated to +#     reflect the processor speed set externally so that the code can use accurate +#     software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +#     This will define a symbol, F_USB, in all source code files equal to the +#     input clock frequency (before any prescaling is performed) in Hz. This value may +#     differ from F_CPU if prescaling is used on the latter, and is required as the +#     raw input clock is fed directly to the PLL sections of the AVR for high speed +#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +#     at the end, this will be done automatically to create a 32-bit value in your +#     source code. +# +#     If no clock division is performed on the input clock inside the AVR (via the +#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +#   Teensy halfKay   512 +#   Teensy++ halfKay 1024 +#   Atmel DFU loader 4096 +#   LUFA bootloader  4096 +#   USBaspLoader     2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +#   change to "no" to disable the options, or define them in the Makefile in +#   the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes         # Console for debug(+400) +COMMAND_ENABLE ?= yes        # Commands for debug and configuration +NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +#BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality +#MIDI_ENABLE ?= no            # MIDI controls +UNICODE_ENABLE ?= yes         # Unicode +#BLUETOOTH_ENABLE ?= yes       # Enable Bluetooth with the Adafruit EZ-Key HID + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c index c5793385fe..02db67eaf2 100644 --- a/keyboards/ergodox/infinity/infinity.c +++ b/keyboards/ergodox/infinity/infinity.c @@ -38,7 +38,6 @@ void init_serial_link_hal(void) {  // Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced  // Which will reduce the brightness range  #define PRESCALAR_DEFINE 0 -#ifdef VISUALIZER_ENABLE  void lcd_backlight_hal_init(void) {  	// Setup Backlight      SIM->SCGC6 |= SIM_SCGC6_FTM0; @@ -76,7 +75,6 @@ void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) {  	CHANNEL_GREEN.CnV = g;  	CHANNEL_BLUE.CnV = b;  } -#endif  __attribute__ ((weak))  void matrix_init_user(void) { @@ -92,6 +90,10 @@ void matrix_init_kb(void) {  	// runs once when the firmware starts up  	matrix_init_user(); +	// The backlight always has to be initialized, otherwise it will stay lit +#ifndef VISUALIZER_ENABLE +	lcd_backlight_hal_init(); +#endif  }  void matrix_scan_kb(void) { diff --git a/keyboards/ergodox/infinity/led.c b/keyboards/ergodox/infinity/led.c index 77195bb358..8175c1c5c5 100644 --- a/keyboards/ergodox/infinity/led.c +++ b/keyboards/ergodox/infinity/led.c @@ -21,29 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.  void led_set(uint8_t usb_led) { -// The LCD backlight functionality conflicts with this simple -// red backlight -#if !defined(LCD_BACKLIGHT_ENABLE) && defined(STATUS_LED_ENABLE) -    // PTC1: LCD Backlight Red(0:on/1:off) -    GPIOC->PDDR |= (1<<1); -    PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); -    if (usb_led & (1<<USB_LED_CAPS_LOCK)) { -        GPIOC->PCOR |= (1<<1); -    } else { -        GPIOC->PSOR |= (1<<1); -    } -#elif !defined(LCD_BACKLIGHT_ENABLE) +    //TODO: Add led emulation if there's no customized visualization      (void)usb_led; -    GPIOC->PDDR |= (1<<1); -    PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); -    GPIOC->PSOR |= (1<<1); -    GPIOC->PDDR |= (1<<2); -    PORTC->PCR[2] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); -    GPIOC->PSOR |= (1<<2); -    GPIOC->PDDR |= (1<<3); -    PORTC->PCR[3] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); -    GPIOC->PSOR |= (1<<3); -#else -    (void)usb_led; -#endif  } diff --git a/keyboards/ergodox/keymaps/galson/Makefile b/keyboards/ergodox/keymaps/galson/Makefile new file mode 100644 index 0000000000..f008f50793 --- /dev/null +++ b/keyboards/ergodox/keymaps/galson/Makefile @@ -0,0 +1,2 @@ +COMMAND_ENABLE   = no  # Commands for debug and configuration + diff --git a/keyboards/ergodox/keymaps/galson/keymap.c b/keyboards/ergodox/keymaps/galson/keymap.c new file mode 100644 index 0000000000..0d3e7560dd --- /dev/null +++ b/keyboards/ergodox/keymaps/galson/keymap.c @@ -0,0 +1,183 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------.           ,--------------------------------------------------. + * |   +    |   1  |   2  |   3  |   4  |   5  | rclk |           | lclk |   6  |   7  |   8  |   9  |   0  |   -    | + * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------| + * |   =    |   Q  |   W  |   E  |   R  |cmd/T |shift |           |shift |cmd/Y |   U  |   I  |   O  |   P  |   \    | + * |--------+------+------+------+------+------|  (   |           |  )   |------+------+------+------+------+--------| + * |   "    |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|    '   | + * |--------+------+------+------+------+------| ctrl |           | ctrl |------+------+------+------+------+--------| + * |   {    |   Z  |   X  |   C  |   V  |   B  |  [   |           |   ]  |   N  |   M  |   ,  |   .  |   /  |    }   | + * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------' + *   |  _   |   `  |  $   | Left | Right|                                       |  Up  | Down |   :  |   *  |  !     | + *   `----------------------------------'                                       `----------------------------------' + *                                        ,-------------.       ,-------------. + *                                        |   <  |  |   |       |   &  |   >   | + *                                 ,------|------|------|       |------+--------+------. + *                                 |      |      |  #   |       |   @  |        |      | + *                                 | Space|Backsp|------|       |------|  Tab   |Enter | + *                                 |      |ace   |  %   |       |  ESC |        |      | + *                                 `--------------------'       `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP(  // layer 0 : default +        // left hand +        KC_PLUS,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_BTN2, +        KC_EQL,          KC_Q,         KC_W,   KC_E,   KC_R,   GUI_T(KC_T),   KC_LSPO, +        KC_DQUO,  KC_A,         KC_S,   KC_D,   KC_F,   KC_G, +        KC_LCBR,  CTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   CTL_T(KC_LBRC), +        KC_UNDS,         KC_GRV,       KC_DLR, KC_LEFT,KC_RGHT, +                                                               KC_LABK,  KC_PIPE, +                                                                       KC_HASH, +                                                       KC_SPC, KC_BSPC,KC_PERC, +        // right hand +        KC_BTN1,         KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS, +        KC_RSPC,  GUI_T(KC_Y),   KC_U,   KC_I,   KC_O,   KC_P,             KC_BSLS, +                         KC_H,   KC_J,   KC_K,   KC_L,   LT(MDIA, KC_SCLN), KC_QUOT, +        CTL_T(KC_RBRC),  KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,   KC_RCBR, +                                 KC_UP,  KC_DOWN,KC_COLN,KC_ASTR,          KC_EXLM, +        KC_AMPR,          KC_RABK, +        KC_AT, +        KC_ESC,         KC_TAB, KC_ENT +    ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------.  + * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  | + * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------| + * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  | + * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------| + * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        | + * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------| + * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        | + * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------' + *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      | + *   `----------------------------------'                                       `----------------------------------' + *                                        ,-------------.       ,-------------. + *                                        |      |      |       |      |      | + *                                 ,------|------|------|       |------+------+------. + *                                 |      |      |      |       |      |      |      | + *                                 |      |      |------|       |------|      |      | + *                                 |      |      |      |       |      |      |      | + *                                 `--------------------'       `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( +       // left hand +       M(0),   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS, +       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, +       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, +       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, +       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, +                                       KC_TRNS,KC_TRNS, +                                               KC_TRNS, +                               KC_TRNS,KC_TRNS,KC_TRNS, +       // right hand +       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11, +       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12, +                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS, +       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS, +                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS, +       KC_TRNS, KC_TRNS, +       KC_TRNS, +       KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------.           ,--------------------------------------------------. + * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        | + * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------| + * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        | + * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------| + * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  | + * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------| + * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        | + * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------' + *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      | + *   `----------------------------------'                                       `----------------------------------' + *                                        ,-------------.       ,-------------. + *                                        |      |      |       |      |      | + *                                 ,------|------|------|       |------+------+------. + *                                 |      |      |      |       |      |      |Brwser| + *                                 |      |      |------|       |------|      |Back  | + *                                 |      |      |      |       |      |      |      | + *                                 `--------------------'       `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( +       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, +       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, +       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, +                                           KC_TRNS, KC_TRNS, +                                                    KC_TRNS, +                                  KC_TRNS, KC_TRNS, KC_TRNS, +    // right hand +       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, +       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, +                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, +       KC_TRNS, KC_TRNS, +       KC_TRNS, +       KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { +    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ +  // MACRODOWN only works in this function +      switch(id) { +        case 0: +        if (record->event.pressed) { +          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); +        } +        break; +      } +    return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + +    uint8_t layer = biton32(layer_state); + +    ergodox_board_led_off(); +    ergodox_right_led_1_off(); +    ergodox_right_led_2_off(); +    ergodox_right_led_3_off(); +    switch (layer) { +      // TODO: Make this relevant to the ErgoDox EZ. +        case 1: +            ergodox_right_led_1_on(); +            break; +        case 2: +            ergodox_right_led_2_on(); +            break; +        default: +            // none +            break; +    } + +}; diff --git a/keyboards/ergodox/keymaps/galson/readme.md b/keyboards/ergodox/keymaps/galson/readme.md new file mode 100644 index 0000000000..ebc916725b --- /dev/null +++ b/keyboards/ergodox/keymaps/galson/readme.md @@ -0,0 +1,11 @@ +# Galson keymap + + +Sep 26, 2016. + +This is an ergonomic layout for programming for those with typing-related injuries. Key features: + +- As many symbol keys as possible are accessible without shifting. These should be accessed by moving the entire hand and pressing with a strong finger. +- Arrow keys and left and right mouse clicks for mouse-free navigation when combined with head mouse or eyetracker. +- Modifier keys are dual role and relocated to positions convenient for the index finger. +- Positions are more convenient when the keyboard is vertically mounted (as it should be!)
\ No newline at end of file diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index fbe64a5b0b..fc5ab77617 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -43,9 +43,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.   *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)   *  */ -#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } -#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } -#define UNUSED_PINS +//Pro micro pinout +	#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } +	#define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 } +	#define UNUSED_PINS +//Teensy 2 pinout + 	//#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } +	//#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } +	//#define UNUSED_PINS +  /* COL2ROW or ROW2COL */  #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/maxipad/readme.md b/keyboards/maxipad/readme.md index ab7b122fe8..de2265d111 100644 --- a/keyboards/maxipad/readme.md +++ b/keyboards/maxipad/readme.md @@ -5,6 +5,8 @@ For the full Quantum feature list, see [the parent readme](/).  ## Building +Change the config.h pinout to match your mcu!! +  Download or clone the whole firmware and navigate to the keyboards/maxipad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.   Depending on which keymap you would like to use, you will have to compile slightly differently. diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 55898147dd..56b2042efa 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -64,4 +64,4 @@ BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by  MIDI_ENABLE ?= no            # MIDI controls  UNICODE_ENABLE ?= no         # Unicode  BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no           # Audio output on port C6 +AUDIO_ENABLE ?= no           # Audio output on port C6
\ No newline at end of file diff --git a/quantum/quantum.c b/quantum/quantum.c index 098312e6ef..b5e2d60b9d 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -1,5 +1,9 @@  #include "quantum.h" +#ifndef TAPPING_TERM +#define TAPPING_TERM 200 +#endif +  static void do_code16 (uint16_t code, void (*f) (uint8_t)) {    switch (code) {    case QK_MODS ... QK_MODS_MAX: @@ -75,6 +79,7 @@ void reset_keyboard(void) {  #endif  static bool shift_interrupted[2] = {0, 0}; +static uint16_t scs_timer = 0;  bool process_record_quantum(keyrecord_t *record) { @@ -283,6 +288,7 @@ bool process_record_quantum(keyrecord_t *record) {      case KC_LSPO: {        if (record->event.pressed) {          shift_interrupted[0] = false; +        scs_timer = timer_read ();          register_mods(MOD_BIT(KC_LSFT));        }        else { @@ -292,7 +298,7 @@ bool process_record_quantum(keyrecord_t *record) {              shift_interrupted[1] = true;            }          #endif -        if (!shift_interrupted[0]) { +        if (!shift_interrupted[0] && timer_elapsed(scs_timer) < TAPPING_TERM) {            register_code(LSPO_KEY);            unregister_code(LSPO_KEY);          } @@ -305,6 +311,7 @@ bool process_record_quantum(keyrecord_t *record) {      case KC_RSPC: {        if (record->event.pressed) {          shift_interrupted[1] = false; +        scs_timer = timer_read ();          register_mods(MOD_BIT(KC_RSFT));        }        else { @@ -314,7 +321,7 @@ bool process_record_quantum(keyrecord_t *record) {              shift_interrupted[1] = true;            }          #endif -        if (!shift_interrupted[1]) { +        if (!shift_interrupted[1] && timer_elapsed(scs_timer) < TAPPING_TERM) {            register_code(RSPC_KEY);            unregister_code(RSPC_KEY);          } | 
