diff options
Diffstat (limited to 'Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt')
-rw-r--r-- | Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt | 184 |
1 files changed, 92 insertions, 92 deletions
diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt index 590d35705d..568874157b 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt @@ -1,92 +1,92 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \mainpage Combined Mass Storage and Keyboard Device Demo
- *
- * \section SSec_Compat Demo Compatibility:
- *
- * The following list indicates what microcontrollers are compatible with this demo.
- *
- * - Series 7 USB AVRs
- * - Series 6 USB AVRs
- * - Series 4 USB AVRs
- * - Series 2 USB AVRs
- *
- * \section SSec_Info USB Information:
- *
- * The following table gives a rundown of the USB utilization of this demo.
- *
- * <table>
- * <tr>
- * <td><b>USB Mode:</b></td>
- * <td>Device</td>
- * </tr>
- * <tr>
- * <td><b>USB Classes:</b></td>
- * <td>Mass Storage Device \n
- * Human Interface Device</td>
- * </tr>
- * <tr>
- * <td><b>USB Subclasses:</b></td>
- * <td>Bulk-Only Transport \n
- * Keyboard Subclass</td>
- * </tr>
- * <tr>
- * <td><b>Relevant Standards:</b></td>
- * <td>USBIF Mass Storage Standard \n
- * USB Bulk-Only Transport Standard \n
- * SCSI Primary Commands Specification \n
- * SCSI Block Commands Specification \n
- * USBIF HID Specification \n
- * USBIF HID Usage Tables</td>
- * </tr>
- * <tr>
- * <td><b>Usable Speeds:</b></td>
- * <td>Full Speed Mode</td>
- * </tr>
- * </table>
- *
- * \section SSec_Description Project Description:
- *
- * Combined Mass Storage and Keyboard demonstration application. This gives a
- * simple reference application for implementing a dual class USB Mass Storage
- * and USB HID Keyboard device using the basic USB UFI and HID drivers in all
- * modern OSes (i.e. no special drivers required).
- *
- * On start-up the system will automatically enumerate and function as an
- * external mass storage device (which may be formatted and used in the same
- * manner as commercial USB Mass Storage devices) and a USB keyboard.
- *
- * You will need to format the mass storage drive upon first run of this
- * demonstration - as the device acts only as a data block transport between
- * the host and the storage media, it does not matter what file system is used,
- * as the data interpretation is performed by the host and not the USB device.
- *
- * Keys on the USB keyboard can be pressed by moving the board's Joystick.
- *
- * The USB control endpoint is managed entirely by the library using endpoint
- * interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for
- * the host to reset the Mass Storage device state during long transfers without
- * the need for complicated polling logic.
- *
- * \section SSec_Options Project Options
- *
- * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- * <table>
- * <tr>
- * <td><b>Define Name:</b></td>
- * <td><b>Location:</b></td>
- * <td><b>Description:</b></td>
- * </tr>
- * <tr>
- * <td>TOTAL_LUNS</td>
- * <td>MassStorage.h</td>
- * <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive
- * - this can be set to any positive non-zero amount.</td>
- * </tr>
- * </table>
- */
+/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Combined Mass Storage and Keyboard Device Demo + * + * \section SSec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * - Series 7 USB AVRs + * - Series 6 USB AVRs + * - Series 4 USB AVRs + * - Series 2 USB AVRs + * + * \section SSec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Device</td> + * </tr> + * <tr> + * <td><b>USB Classes:</b></td> + * <td>Mass Storage Device \n + * Human Interface Device</td> + * </tr> + * <tr> + * <td><b>USB Subclasses:</b></td> + * <td>Bulk-Only Transport \n + * Keyboard Subclass</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>USBIF Mass Storage Standard \n + * USB Bulk-Only Transport Standard \n + * SCSI Primary Commands Specification \n + * SCSI Block Commands Specification \n + * USBIF HID Specification \n + * USBIF HID Usage Tables</td> + * </tr> + * <tr> + * <td><b>Usable Speeds:</b></td> + * <td>Full Speed Mode</td> + * </tr> + * </table> + * + * \section SSec_Description Project Description: + * + * Combined Mass Storage and Keyboard demonstration application. This gives a + * simple reference application for implementing a dual class USB Mass Storage + * and USB HID Keyboard device using the basic USB UFI and HID drivers in all + * modern OSes (i.e. no special drivers required). + * + * On start-up the system will automatically enumerate and function as an + * external mass storage device (which may be formatted and used in the same + * manner as commercial USB Mass Storage devices) and a USB keyboard. + * + * You will need to format the mass storage drive upon first run of this + * demonstration - as the device acts only as a data block transport between + * the host and the storage media, it does not matter what file system is used, + * as the data interpretation is performed by the host and not the USB device. + * + * Keys on the USB keyboard can be pressed by moving the board's Joystick. + * + * The USB control endpoint is managed entirely by the library using endpoint + * interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for + * the host to reset the Mass Storage device state during long transfers without + * the need for complicated polling logic. + * + * \section SSec_Options Project Options + * + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <td><b>Define Name:</b></td> + * <td><b>Location:</b></td> + * <td><b>Description:</b></td> + * </tr> + * <tr> + * <td>TOTAL_LUNS</td> + * <td>MassStorage.h</td> + * <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive + * - this can be set to any positive non-zero amount.</td> + * </tr> + * </table> + */ |