diff options
Diffstat (limited to 'Demos/Device/LowLevel/GenericHID/GenericHID.c')
-rw-r--r-- | Demos/Device/LowLevel/GenericHID/GenericHID.c | 280 |
1 files changed, 280 insertions, 0 deletions
diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.c b/Demos/Device/LowLevel/GenericHID/GenericHID.c new file mode 100644 index 0000000000..058d269fef --- /dev/null +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.c @@ -0,0 +1,280 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2009.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, and distribute this software
+ and its documentation for any purpose and without fee is hereby
+ granted, provided that the above copyright notice appear in all
+ copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Main source file for the GenericHID demo. This file contains the main tasks of the demo and
+ * is responsible for the initial application hardware configuration.
+ */
+
+#include "GenericHID.h"
+
+/* Scheduler Task List */
+TASK_LIST
+{
+ { .Task = USB_USBTask , .TaskStatus = TASK_STOP },
+ { .Task = USB_HID_Report , .TaskStatus = TASK_STOP },
+};
+
+/** Static buffer to hold the last received report from the host, so that it can be echoed back in the next sent report */
+static uint8_t LastReceived[GENERIC_REPORT_SIZE];
+
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ * starts the scheduler to run the USB management task.
+ */
+int main(void)
+{
+ /* Disable watchdog if enabled by bootloader/fuses */
+ MCUSR &= ~(1 << WDRF);
+ wdt_disable();
+
+ /* Disable clock division */
+ clock_prescale_set(clock_div_1);
+
+ /* Hardware Initialization */
+ LEDs_Init();
+
+ /* Indicate USB not ready */
+ UpdateStatus(Status_USBNotReady);
+
+ /* Initialize Scheduler so that it can be used */
+ Scheduler_Init();
+
+ /* Initialize USB Subsystem */
+ USB_Init();
+
+ /* Scheduling - routine never returns, so put this last in the main function */
+ Scheduler_Start();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
+ * starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Connect(void)
+{
+ /* Start USB management task */
+ Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
+
+ /* Indicate USB enumerating */
+ UpdateStatus(Status_USBEnumerating);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ * the status LEDs and stops the USB management task.
+ */
+void EVENT_USB_Disconnect(void)
+{
+ /* Stop running HID reporting and USB management tasks */
+ Scheduler_SetTaskMode(USB_HID_Report, TASK_STOP);
+ Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
+
+ /* Indicate USB not ready */
+ UpdateStatus(Status_USBNotReady);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
+ * of the USB device after enumeration, and configures the generic HID device endpoints.
+ */
+void EVENT_USB_ConfigurationChanged(void)
+{
+ /* Setup Generic IN Report Endpoint */
+ Endpoint_ConfigureEndpoint(GENERIC_IN_EPNUM, EP_TYPE_INTERRUPT,
+ ENDPOINT_DIR_IN, GENERIC_EPSIZE,
+ ENDPOINT_BANK_SINGLE);
+
+ /* Setup Generic OUT Report Endpoint */
+ Endpoint_ConfigureEndpoint(GENERIC_OUT_EPNUM, EP_TYPE_INTERRUPT,
+ ENDPOINT_DIR_OUT, GENERIC_EPSIZE,
+ ENDPOINT_BANK_SINGLE);
+
+ /* Indicate USB connected and ready */
+ UpdateStatus(Status_USBReady);
+}
+
+/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
+ * control requests that are not handled internally by the USB library (including the HID commands, which are
+ * all issued via the control endpoint), so that they can be handled appropriately for the application.
+ */
+void EVENT_USB_UnhandledControlPacket(void)
+{
+ /* Handle HID Class specific requests */
+ switch (USB_ControlRequest.bRequest)
+ {
+ case REQ_GetReport:
+ if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+ {
+ uint8_t GenericData[GENERIC_REPORT_SIZE];
+
+ Endpoint_ClearSETUP();
+
+ CreateGenericHIDReport(GenericData);
+
+ /* Write the report data to the control endpoint */
+ Endpoint_Write_Control_Stream_LE(&GenericData, sizeof(GenericData));
+
+ /* Finalize the stream transfer to send the last packet or clear the host abort */
+ Endpoint_ClearOUT();
+ }
+
+ break;
+ case REQ_SetReport:
+ if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+ {
+ uint8_t GenericData[GENERIC_REPORT_SIZE];
+
+ Endpoint_ClearSETUP();
+
+ /* Wait until the generic report has been sent by the host */
+ while (!(Endpoint_IsOUTReceived()));
+
+ Endpoint_Read_Control_Stream_LE(&GenericData, sizeof(GenericData));
+
+ ProcessGenericHIDReport(GenericData);
+
+ /* Clear the endpoint data */
+ Endpoint_ClearOUT();
+
+ /* Wait until the host is ready to receive the request confirmation */
+ while (!(Endpoint_IsINReady()));
+
+ /* Handshake the request by sending an empty IN packet */
+ Endpoint_ClearIN();
+ }
+
+ break;
+ }
+}
+
+/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
+ * log to a serial port, or anything else that is suitable for status updates.
+ *
+ * \param CurrentStatus Current status of the system, from the GenericHID_StatusCodes_t enum
+ */
+void UpdateStatus(uint8_t CurrentStatus)
+{
+ uint8_t LEDMask = LEDS_NO_LEDS;
+
+ /* Set the LED mask to the appropriate LED mask based on the given status code */
+ switch (CurrentStatus)
+ {
+ case Status_USBNotReady:
+ LEDMask = (LEDS_LED1);
+ break;
+ case Status_USBEnumerating:
+ LEDMask = (LEDS_LED1 | LEDS_LED2);
+ break;
+ case Status_USBReady:
+ LEDMask = (LEDS_LED2 | LEDS_LED4);
+ break;
+ }
+
+ /* Set the board LEDs to the new LED mask */
+ LEDs_SetAllLEDs(LEDMask);
+}
+
+/** Function to process the lest received report from the host.
+ *
+ * \param DataArray Pointer to a buffer where the last report data is stored
+ */
+void ProcessGenericHIDReport(uint8_t* DataArray)
+{
+ /*
+ This is where you need to process the reports being sent from the host to the device.
+ DataArray is an array holding the last report from the host. This function is called
+ each time the host has sent a report to the device.
+ */
+
+ for (uint8_t i = 0; i < GENERIC_REPORT_SIZE; i++)
+ LastReceived[i] = DataArray[i];
+}
+
+/** Function to create the next report to send back to the host at the next reporting interval.
+ *
+ * \param DataArray Pointer to a buffer where the next report data should be stored
+ */
+void CreateGenericHIDReport(uint8_t* DataArray)
+{
+ /*
+ This is where you need to create reports to be sent to the host from the device. This
+ function is called each time the host is ready to accept a new report. DataArray is
+ an array to hold the report to the host.
+ */
+
+ for (uint8_t i = 0; i < GENERIC_REPORT_SIZE; i++)
+ DataArray[i] = LastReceived[i];
+}
+
+TASK(USB_HID_Report)
+{
+ /* Check if the USB system is connected to a host */
+ if (USB_IsConnected)
+ {
+ Endpoint_SelectEndpoint(GENERIC_OUT_EPNUM);
+
+ /* Check to see if a packet has been sent from the host */
+ if (Endpoint_IsOUTReceived())
+ {
+ /* Check to see if the packet contains data */
+ if (Endpoint_IsReadWriteAllowed())
+ {
+ /* Create a temporary buffer to hold the read in report from the host */
+ uint8_t GenericData[GENERIC_REPORT_SIZE];
+
+ /* Read Generic Report Data */
+ Endpoint_Read_Stream_LE(&GenericData, sizeof(GenericData));
+
+ /* Process Generic Report Data */
+ ProcessGenericHIDReport(GenericData);
+ }
+
+ /* Finalize the stream transfer to send the last packet */
+ Endpoint_ClearOUT();
+ }
+
+ Endpoint_SelectEndpoint(GENERIC_IN_EPNUM);
+
+ /* Check to see if the host is ready to accept another packet */
+ if (Endpoint_IsINReady())
+ {
+ /* Create a temporary buffer to hold the report to send to the host */
+ uint8_t GenericData[GENERIC_REPORT_SIZE];
+
+ /* Create Generic Report Data */
+ CreateGenericHIDReport(GenericData);
+
+ /* Write Generic Report Data */
+ Endpoint_Write_Stream_LE(&GenericData, sizeof(GenericData));
+
+ /* Finalize the stream transfer to send the last packet */
+ Endpoint_ClearIN();
+ }
+ }
+}
|