diff options
Diffstat (limited to 'Demos/Device')
86 files changed, 579 insertions, 747 deletions
diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt index 654536c80b..dfa9362c25 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF Audio 1.0 Data Formats Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf index dd5fe211c7..d217aa443f 100644 --- a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Audio Input Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile index a63765eb08..5724da5e66 100644 --- a/Demos/Device/ClassDriver/AudioInput/makefile +++ b/Demos/Device/ClassDriver/AudioInput/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt index 77e9866174..76445e0e2d 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF Audio 1.0 Data Formats Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf index c50327d398..4cd9e9c5b2 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Audio Output Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile index 1ce907ca2d..88074f605f 100644 --- a/Demos/Device/ClassDriver/AudioOutput/makefile +++ b/Demos/Device/ClassDriver/AudioOutput/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf index cd37f7df45..0f78680c3f 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Dual Virtual Serial Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt index 822fabca98..70e95ad51d 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -41,7 +41,7 @@ * USBIF CDC Class Standard</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile index 5290c4fb15..064bf1289a 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile +++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf index e12fde7726..7b71c2054b 100644 --- a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf +++ b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Generic HID Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt index 998471a2ca..3d72345f32 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile index e4d8021506..5ef95e060a 100644 --- a/Demos/Device/ClassDriver/GenericHID/makefile +++ b/Demos/Device/ClassDriver/GenericHID/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/Joystick/Doxygen.conf b/Demos/Device/ClassDriver/Joystick/Doxygen.conf index 1ebeaf260e..407d08a864 100644 --- a/Demos/Device/ClassDriver/Joystick/Doxygen.conf +++ b/Demos/Device/ClassDriver/Joystick/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Joystick Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.txt b/Demos/Device/ClassDriver/Joystick/Joystick.txt index 6fee43b3e2..55be2c3005 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.txt +++ b/Demos/Device/ClassDriver/Joystick/Joystick.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile index 955b5bd4fe..c970747a03 100644 --- a/Demos/Device/ClassDriver/Joystick/makefile +++ b/Demos/Device/ClassDriver/Joystick/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf index 3557860c3b..0b47b1a321 100644 --- a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Keyboard Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt index b124efb0fb..3e7ff88ed6 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile index 03913b7be4..8b07bb520e 100644 --- a/Demos/Device/ClassDriver/Keyboard/makefile +++ b/Demos/Device/ClassDriver/Keyboard/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf index 284d454a54..a7357cb186 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Keyboard/Mouse Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt index a926ab15b9..b994422a8f 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile index ee4e438309..7d4fc9537f 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf index 24028aea7e..c3696bbd95 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Keyboard/Mouse (Multiple HID R # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt index bf0528eccf..e99a7dc74b 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile index 93ce28617c..2909880e45 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/MIDI/Doxygen.conf b/Demos/Device/ClassDriver/MIDI/Doxygen.conf index 96f71c7d10..f95325f80d 100644 --- a/Demos/Device/ClassDriver/MIDI/Doxygen.conf +++ b/Demos/Device/ClassDriver/MIDI/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - MIDI Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.txt b/Demos/Device/ClassDriver/MIDI/MIDI.txt index 026f91bbf9..362250c41e 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.txt +++ b/Demos/Device/ClassDriver/MIDI/MIDI.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -39,7 +39,7 @@ * General MIDI Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile index 9190344f7c..e5b0e624a2 100644 --- a/Demos/Device/ClassDriver/MIDI/makefile +++ b/Demos/Device/ClassDriver/MIDI/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf index e74be64acd..4ef0675039 100644 --- a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Mass Storage Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt index c2761a38d1..5bf7c55703 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -40,7 +40,7 @@ * SCSI Block Commands Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile index be74104a07..0ee4619677 100644 --- a/Demos/Device/ClassDriver/MassStorage/makefile +++ b/Demos/Device/ClassDriver/MassStorage/makefile @@ -698,7 +698,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf index f8b707dfff..4f8b9e59da 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Mass Storage and Keyboard Devi # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt index 01bf5772cf..7cdb47279d 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -44,7 +44,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile index 5e8dbf49db..a504d0c639 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile @@ -693,7 +693,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/Mouse/Doxygen.conf b/Demos/Device/ClassDriver/Mouse/Doxygen.conf index 7fccc0948b..1dd2ccd021 100644 --- a/Demos/Device/ClassDriver/Mouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/Mouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Mouse Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.txt b/Demos/Device/ClassDriver/Mouse/Mouse.txt index 65a184f2a6..d1277a2d69 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.txt +++ b/Demos/Device/ClassDriver/Mouse/Mouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile index f54c896c2b..7c7493d1af 100644 --- a/Demos/Device/ClassDriver/Mouse/makefile +++ b/Demos/Device/ClassDriver/Mouse/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf index d43e5b0ace..da74f6b483 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - RNDIS Ethernet Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt index a458370dae..ac72d4ae7f 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt @@ -10,8 +10,8 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) * * \section Sec_Info USB Information: * @@ -35,7 +35,7 @@ * <td>Microsoft RNDIS Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile index 4cc22a5973..c537056099 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/makefile +++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile @@ -701,7 +701,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf index 2e09c1a8a6..ebe72a5d97 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Virtual Serial Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt index f26c4b8724..e0a3291b4f 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -37,7 +37,7 @@ * <td>USBIF CDC Class Standard</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile index 5539d8ab23..e002351130 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/makefile +++ b/Demos/Device/ClassDriver/VirtualSerial/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf index 20d4914b4c..c38f51df66 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Virtual Serial/Mass Storage Device Demo # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt index 088f20ac4d..042244119d 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -42,7 +42,7 @@ * SCSI Block Commands Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile b/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile index a3bca46736..57b78a87ec 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile @@ -693,7 +693,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf index acf6f4733f..fea97b2d94 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Virtual Serial and Mouse Devic # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt index 53152043f9..fe6328b73a 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -41,7 +41,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile index 5cd99d5ff4..592c915132 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile index 5afc17208e..052f3edea1 100644 --- a/Demos/Device/Incomplete/Sideshow/makefile +++ b/Demos/Device/Incomplete/Sideshow/makefile @@ -695,7 +695,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/Incomplete/TestAndMeasurement/makefile b/Demos/Device/Incomplete/TestAndMeasurement/makefile index a2ba7c1073..da395ce2d3 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/makefile +++ b/Demos/Device/Incomplete/TestAndMeasurement/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.txt b/Demos/Device/LowLevel/AudioInput/AudioInput.txt index 17b476e24a..b30d7d63ee 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.txt +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF Audio 1.0 Data Formats Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/AudioInput/Doxygen.conf b/Demos/Device/LowLevel/AudioInput/Doxygen.conf index dd5fe211c7..d217aa443f 100644 --- a/Demos/Device/LowLevel/AudioInput/Doxygen.conf +++ b/Demos/Device/LowLevel/AudioInput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Audio Input Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile index c2288f7fc3..e9fee09610 100644 --- a/Demos/Device/LowLevel/AudioInput/makefile +++ b/Demos/Device/LowLevel/AudioInput/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt b/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt index 77e9866174..76445e0e2d 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF Audio 1.0 Data Formats Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/AudioOutput/Doxygen.conf b/Demos/Device/LowLevel/AudioOutput/Doxygen.conf index c50327d398..4cd9e9c5b2 100644 --- a/Demos/Device/LowLevel/AudioOutput/Doxygen.conf +++ b/Demos/Device/LowLevel/AudioOutput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Audio Output Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile index 4c32b3e2a4..486e8c3649 100644 --- a/Demos/Device/LowLevel/AudioOutput/makefile +++ b/Demos/Device/LowLevel/AudioOutput/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf b/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf index cd37f7df45..0f78680c3f 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Dual Virtual Serial Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt index bd0867f62b..0897bf90bd 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt +++ b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -41,7 +41,7 @@ * USBIF CDC Class Standard</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile index 4e683e9e53..622b998626 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/makefile +++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/GenericHID/Doxygen.conf b/Demos/Device/LowLevel/GenericHID/Doxygen.conf index e12fde7726..7b71c2054b 100644 --- a/Demos/Device/LowLevel/GenericHID/Doxygen.conf +++ b/Demos/Device/LowLevel/GenericHID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Generic HID Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.txt b/Demos/Device/LowLevel/GenericHID/GenericHID.txt index 998471a2ca..3d72345f32 100644 --- a/Demos/Device/LowLevel/GenericHID/GenericHID.txt +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile index 95ed8b01b5..81b147cc65 100644 --- a/Demos/Device/LowLevel/GenericHID/makefile +++ b/Demos/Device/LowLevel/GenericHID/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/Joystick/Doxygen.conf b/Demos/Device/LowLevel/Joystick/Doxygen.conf index 1ebeaf260e..407d08a864 100644 --- a/Demos/Device/LowLevel/Joystick/Doxygen.conf +++ b/Demos/Device/LowLevel/Joystick/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Joystick Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/Joystick/Joystick.txt b/Demos/Device/LowLevel/Joystick/Joystick.txt index 6fee43b3e2..55be2c3005 100644 --- a/Demos/Device/LowLevel/Joystick/Joystick.txt +++ b/Demos/Device/LowLevel/Joystick/Joystick.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile index 6393040952..59459bb70d 100644 --- a/Demos/Device/LowLevel/Joystick/makefile +++ b/Demos/Device/LowLevel/Joystick/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/Keyboard/Doxygen.conf b/Demos/Device/LowLevel/Keyboard/Doxygen.conf index 3557860c3b..0b47b1a321 100644 --- a/Demos/Device/LowLevel/Keyboard/Doxygen.conf +++ b/Demos/Device/LowLevel/Keyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Keyboard Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.txt b/Demos/Device/LowLevel/Keyboard/Keyboard.txt index 36e60290c8..f7e2829614 100644 --- a/Demos/Device/LowLevel/Keyboard/Keyboard.txt +++ b/Demos/Device/LowLevel/Keyboard/Keyboard.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile index 9c36e4eaaa..ee4bd35bd9 100644 --- a/Demos/Device/LowLevel/Keyboard/makefile +++ b/Demos/Device/LowLevel/Keyboard/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf b/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf index 284d454a54..a7357cb186 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Keyboard/Mouse Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt index a926ab15b9..b994422a8f 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile index c56d990ffb..d99e6dd3f8 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/makefile +++ b/Demos/Device/LowLevel/KeyboardMouse/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/MIDI/Doxygen.conf b/Demos/Device/LowLevel/MIDI/Doxygen.conf index 96f71c7d10..f95325f80d 100644 --- a/Demos/Device/LowLevel/MIDI/Doxygen.conf +++ b/Demos/Device/LowLevel/MIDI/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - MIDI Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/MIDI/MIDI.txt b/Demos/Device/LowLevel/MIDI/MIDI.txt index 026f91bbf9..362250c41e 100644 --- a/Demos/Device/LowLevel/MIDI/MIDI.txt +++ b/Demos/Device/LowLevel/MIDI/MIDI.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -39,7 +39,7 @@ * General MIDI Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile index 38247459f8..4c3aca9746 100644 --- a/Demos/Device/LowLevel/MIDI/makefile +++ b/Demos/Device/LowLevel/MIDI/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/MassStorage/Doxygen.conf b/Demos/Device/LowLevel/MassStorage/Doxygen.conf index e74be64acd..4ef0675039 100644 --- a/Demos/Device/LowLevel/MassStorage/Doxygen.conf +++ b/Demos/Device/LowLevel/MassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Mass Storage Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/Demos/Device/LowLevel/MassStorage/MassStorage.txt index 35b47a46af..b5f9f9cef7 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.txt +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -40,7 +40,7 @@ * SCSI Block Commands Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile index e07f1e882f..e78e2640b1 100644 --- a/Demos/Device/LowLevel/MassStorage/makefile +++ b/Demos/Device/LowLevel/MassStorage/makefile @@ -692,7 +692,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/Mouse/Doxygen.conf b/Demos/Device/LowLevel/Mouse/Doxygen.conf index 7fccc0948b..1dd2ccd021 100644 --- a/Demos/Device/LowLevel/Mouse/Doxygen.conf +++ b/Demos/Device/LowLevel/Mouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Mouse Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/Mouse/Mouse.txt b/Demos/Device/LowLevel/Mouse/Mouse.txt index a9cdf2fe5d..0664cba635 100644 --- a/Demos/Device/LowLevel/Mouse/Mouse.txt +++ b/Demos/Device/LowLevel/Mouse/Mouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile index dc4438f91d..a793b41bcb 100644 --- a/Demos/Device/LowLevel/Mouse/makefile +++ b/Demos/Device/LowLevel/Mouse/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf b/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf index d43e5b0ace..da74f6b483 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - RNDIS Ethernet Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt index a458370dae..ac72d4ae7f 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt @@ -10,8 +10,8 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) * * \section Sec_Info USB Information: * @@ -35,7 +35,7 @@ * <td>Microsoft RNDIS Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile index 53afd78e68..889e42d755 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/makefile +++ b/Demos/Device/LowLevel/RNDISEthernet/makefile @@ -701,7 +701,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf b/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf index 2e09c1a8a6..ebe72a5d97 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf +++ b/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Virtual Serial Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt index f26c4b8724..e0a3291b4f 100644 --- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt +++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -37,7 +37,7 @@ * <td>USBIF CDC Class Standard</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile index 1256bbdabd..4cfea66dd7 100644 --- a/Demos/Device/LowLevel/VirtualSerial/makefile +++ b/Demos/Device/LowLevel/VirtualSerial/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. |
