diff options
Diffstat (limited to 'Projects/AVRISP-MKII/AVRISP-MKII.txt')
-rw-r--r-- | Projects/AVRISP-MKII/AVRISP-MKII.txt | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.txt b/Projects/AVRISP-MKII/AVRISP-MKII.txt index c4ba43cccc..519a49c7ac 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.txt +++ b/Projects/AVRISP-MKII/AVRISP-MKII.txt @@ -214,62 +214,62 @@ * </tr> * <tr> * <td>AUX_LINE_PORT</td> - * <td>Makefile CDEFS</td> + * <td>Makefile LUFA_OPTS</td> * <td>PORT register for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td> * </tr> * <tr> * <td>AUX_LINE_PIN</td> - * <td>Makefile CDEFS</td> + * <td>Makefile LUFA_OPTS</td> * <td>PIN register for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td> * </tr> * <tr> * <td>AUX_LINE_DDR</td> - * <td>Makefile CDEFS</td> + * <td>Makefile LUFA_OPTS</td> * <td>DDR register for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td> * </tr> * <tr> * <td>AUX_LINE_MASK</td> - * <td>Makefile CDEFS</td> + * <td>Makefile LUFA_OPTS</td> * <td>Mask for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. <b>Must not be the AVR's /SS pin</b>. <i>Ignored when * compiled for the XPLAIN board.</i></td> * </tr> * <tr> * <td>VTARGET_ADC_CHANNEL</td> - * <td>Makefile CDEFS</td> + * <td>Makefile LUFA_OPTS</td> * <td>ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined. * <i>Ignored when compiled for targets lacking an ADC.</i></td> * </tr> * <tr> * <td>ENABLE_ISP_PROTOCOL</td> - * <td>Makefile CDEFS</td> + * <td>Makefile LUFA_OPTS</td> * <td>Define to enable SPI programming protocol support. <i>Ignored when compiled for the XPLAIN board.</i></td> * </tr> * <tr> * <td>ENABLE_XPROG_PROTOCOL</td> - * <td>Makefile CDEFS</td> + * <td>Makefile LUFA_OPTS</td> * <td>Define to enable PDI and TPI programming protocol support. <i>Ignored when compiled for the XPLAIN board.</i></td> * </tr> * <tr> * <td>NO_VTARGET_DETECT</td> - * <td>Makefile CDEFS</td> + * <td>Makefile LUFA_OPTS</td> * <td>Define to disable VTARGET sampling and reporting on AVR models with an ADC converter. This will cause the programmer * to report a fixed 5V target voltage to the host regardless of the real target voltage. <i>Ignored when compiled for * targets lacking an ADC.</i></td> * </tr> * <tr> * <td>VTARGET_REF_VOLTS</td> - * <td>Makefile CDEFS</td> + * <td>Makefile LUFA_OPTS</td> * <td>Indicates the programmer AVR's AVCC reference voltage when measuring the target's supply voltage. Note that the supply * voltage should never exceed the reference voltage on the programmer AVR without some form of protection to prevent damage * to the ADC. <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td> * </tr> * <tr> * <td>VTARGET_SCALE_FACTOR</td> - * <td>Makefile CDEFS</td> + * <td>Makefile LUFA_OPTS</td> * <td>Indicates the target's supply voltage scale factor when applied to the ADC. A simple resistive divider can be used on the * ADC pin for measuring the target's supply voltage, so that voltages above the programmer AVR's AVCC reference voltage can be * measured. This should be the reciprocal of the division performed - e.g. if the VTARGET voltage is halved, this should be set @@ -277,7 +277,7 @@ * </tr> * <tr> * <td>LIBUSB_DRIVER_COMPAT</td> - * <td>Makefile CDEFS</td> + * <td>Makefile LUFA_OPTS</td> * <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making * the code compatible with software such as avrdude (all platforms) that use the libUSB driver. * </tr> |