diff options
Diffstat (limited to 'docs/feature_led_matrix.md')
-rw-r--r-- | docs/feature_led_matrix.md | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/docs/feature_led_matrix.md b/docs/feature_led_matrix.md index 87f4f36f1d..7dd2e71d61 100644 --- a/docs/feature_led_matrix.md +++ b/docs/feature_led_matrix.md @@ -23,10 +23,10 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N> | `IS31FL3731_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | | `IS31FL3731_DRIVER_COUNT` | (Required) How many LED driver IC's are present | | | `LED_MATRIX_LED_COUNT` | (Required) How many LED lights are present across all drivers | | -| `LED_DRIVER_ADDR_1` | (Required) Address for the first LED driver | | -| `LED_DRIVER_ADDR_2` | (Optional) Address for the second LED driver | | -| `LED_DRIVER_ADDR_3` | (Optional) Address for the third LED driver | | -| `LED_DRIVER_ADDR_4` | (Optional) Address for the fourth LED driver | | +| `IS31FL3731_I2C_ADDRESS_1` | (Required) Address for the first LED driver | | +| `IS31FL3731_I2C_ADDRESS_2` | (Optional) Address for the second LED driver | | +| `IS31FL3731_I2C_ADDRESS_3` | (Optional) Address for the third LED driver | | +| `IS31FL3731_I2C_ADDRESS_4` | (Optional) Address for the fourth LED driver | | Here is an example using 2 drivers. @@ -40,8 +40,8 @@ Here is an example using 2 drivers. // 11 AD <-> VCC // ADDR represents A1:A0 of the 7-bit address. // The result is: 0b11101(ADDR) -#define LED_DRIVER_ADDR_1 IS31FL3731_I2C_ADDRESS_GND -#define LED_DRIVER_ADDR_2 IS31FL3731_I2C_ADDRESS_SDA +#define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND +#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 #define LED_DRIVER_1_LED_TOTAL 25 @@ -51,7 +51,7 @@ Here is an example using 2 drivers. !> Note the parentheses, this is so when `LED_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL)` will give very different results than `rand() % LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL`. -For split keyboards using `LED_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `DRIVER_ADDR_1` for one and `DRIVER_ADDR_2` for the other one. Then, in `g_is31fl3731_leds`, fill out the correct driver index (0 or 1). If using one address, use `DRIVER_ADDR_1` for both, and use index 0 for `g_is31fl3731_leds`. +For split keyboards using `LED_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `IS31FL3731_I2C_ADDRESS_1` for one and `IS31FL3731_I2C_ADDRESS_2` for the other one. Then, in `g_is31fl3731_leds`, fill out the correct driver index (0 or 1). If using one address, use `IS31FL3731_I2C_ADDRESS_1` for both, and use index 0 for `g_is31fl3731_leds`. Define these arrays listing all the LEDs in your `<keyboard>.c`: |