diff options
Diffstat (limited to 'docs/features/tri_layer.md')
-rw-r--r-- | docs/features/tri_layer.md | 50 |
1 files changed, 50 insertions, 0 deletions
diff --git a/docs/features/tri_layer.md b/docs/features/tri_layer.md new file mode 100644 index 0000000000..c32e65caed --- /dev/null +++ b/docs/features/tri_layer.md @@ -0,0 +1,50 @@ +# Tri Layers {#tri-layers} + +This enables support for the OLKB style "Tri Layer" keycodes. These function similar to the `MO` (momentary) function key, but if both the "Lower" and "Upper" keys are pressed, it activates a third "Adjust" layer. To enable this functionality, add this line to your `rules.mk`: + +```make +TRI_LAYER_ENABLE = yes +``` + +Note that the "upper", "lower" and "adjust" names don't have a particular significance, they are just used to identify and clarify the behavior. Layers are processed from highest numeric value to lowest, however the values are not required to be consecutive. + +For a detailed explanation of how the layer stack works, check out [Keymap Overview](../keymap#keymap-and-layers). + +## Keycodes {#keycodes} + +| Keycode | Alias | Description | +|----------------------|-----------|---------------------------------------------------------------------------------------------------------| +| `QK_TRI_LAYER_LOWER` | `TL_LOWR` | Momentarily enables the "lower" layer. Enables the "adjust" layer if the "upper" layer is also enabled" | +| `QK_TRI_LAYER_UPPER` | `TL_UPPR` | Momentarily enables the "upper" layer. Enables the "adjust" layer if the "lower" layer is also enabled" | + +## Configuration + +To change the default values for the layers, you can change these defines, in your `config.h` + +| Config name | Default | Description | +|--------------------------|---------|------------------------------------------| +| `TRI_LAYER_LOWER_LAYER` | `1` | Sets the default for the "lower" layer. | +| `TRI_LAYER_UPPER_LAYER` | `2` | Sets the default for the "upper" layer. | +| `TRI_LAYER_ADJUST_LAYER` | `3` | Sets the default for the "adjust" layer. | + +Eg, if you wanted to set the "Adjust" layer to be layer 5, you'd add this to your `config.h`: + +```c +#define TRI_LAYER_ADJUST_LAYER 5 +``` + +## Functions + +| Function name | Description | +|----------------------------------------------|-------------------------------------------------| +| `set_tri_layer_lower_layer(layer)` | Changes the "lower" layer*. | +| `set_tri_layer_upper_layer(layer)` | Changes the "upper" layer*. | +| `set_tri_layer_adjust_layer(layer)` | Changes the "adjust" layer*. | +| `set_tri_layer_layers(lower, upper, adjust)` | Sets the "lower", "upper" and "adjust" layers*. | +| `get_tri_layer_lower_layer()` | Gets the current "lower" layer. | +| `get_tri_layer_upper_layer()` | Gets the current "upper" layer. | +| `get_tri_layer_adjust_layer()` | Gets the current "adjust" layer. | + +::: warning +Note: these settings are not persistent, and will be reset to the default on power loss or power cycling of the controller. +::: |