diff options
Diffstat (limited to 'docs/features')
-rw-r--r-- | docs/features/community_modules.md | 46 | ||||
-rw-r--r-- | docs/features/pointing_device.md | 26 | ||||
-rw-r--r-- | docs/features/rgb_matrix.md | 2 | ||||
-rw-r--r-- | docs/features/stenography.md | 2 |
4 files changed, 63 insertions, 13 deletions
diff --git a/docs/features/community_modules.md b/docs/features/community_modules.md index a28c5afaeb..eff07c939a 100644 --- a/docs/features/community_modules.md +++ b/docs/features/community_modules.md @@ -72,6 +72,7 @@ A Community Module is denoted by a `qmk_module.json` file such as the following: { "module_name": "Hello World", "maintainer": "QMK Maintainers", + "license": "GPL-2.0-or-later", "features": { "deferred_exec": true }, @@ -86,6 +87,10 @@ A Community Module is denoted by a `qmk_module.json` file such as the following: At minimum, the module must provide the `module_name` and `maintainer` fields. +The `license` field is encouraged to indicate the terms for using and sharing the module. It is recommended to use a [SPDX license identifier](https://spdx.org/licenses/) like "`Apache-2.0`" or "`GPL-2.0-or-later`" if possible. + +The `url` field may specify a URL to more information about the module. + The use of `features` matches the definition normally provided within `keyboard.json` and `info.json`, allowing a module to signal to the build system that it has its own dependencies. In the example above, it enables the _deferred executor_ feature whenever the above module is used in a build. The `keycodes` array allows a module to provide new keycodes (as well as corresponding aliases) to a keymap. @@ -118,22 +123,39 @@ The source file may provide functions which allow access to information specifie Introspection is a relatively advanced topic within QMK, and existing patterns should be followed. If you need help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) or [chat with us on Discord](https://discord.gg/qmk). ::: +### `led_matrix_module.inc` + +This file defines LED matrix effects in the same form as used with `led_matrix_kb.inc` and `led_matrix_user.inc` (see [Custom LED Matrix Effects](led_matrix#custom-led-matrix-effects)). Effect mode names are prepended with `LED_MATRIX_COMMUNITY_MODULE_`. + +### `rgb_matrix_module.inc` + +This file defines RGB matrix effects in the same form as used with `rgb_matrix_kb.inc` and `rgb_matrix_user.inc` (see [Custom RGB Matrix Effects](rgb_matrix#custom-rgb-matrix-effects)). Effect mode names are prepended with `RGB_MATRIX_COMMUNITY_MODULE_`. + ### Compatible APIs Community Modules may provide specializations for the following APIs: -| Base API | API Format | Example (`hello_world` module) | API Version | -|----------------------------|-------------------------------------|----------------------------------------|-------------| -| `keyboard_pre_init` | `keyboard_pre_init_<module>` | `keyboard_pre_init_hello_world` | `0.1.0` | -| `keyboard_post_init` | `keyboard_post_init_<module>` | `keyboard_post_init_hello_world` | `0.1.0` | -| `pre_process_record` | `pre_process_record_<module>` | `pre_process_record_hello_world` | `0.1.0` | -| `process_record` | `process_record_<module>` | `process_record_hello_world` | `0.1.0` | -| `post_process_record` | `post_process_record_<module>` | `post_process_record_hello_world` | `0.1.0` | -| `housekeeping_task` | `housekeeping_task_<module>` | `housekeeping_task_hello_world` | `1.0.0` | -| `suspend_power_down` | `suspend_power_down_<module>` | `suspend_power_down_hello_world` | `1.0.0` | -| `suspend_wakeup_init` | `suspend_wakeup_init_<module>` | `suspend_wakeup_init_hello_world` | `1.0.0` | -| `shutdown` | `shutdown_<module>` | `shutdown_hello_world` | `1.0.0` | -| `process_detected_host_os` | `process_detected_host_os_<module>` | `process_detected_host_os_hello_world` | `1.0.0` | +| Base API | API Format | Example (`hello_world` module) | API Version | +|----------------------------------|-------------------------------------------|---------------------------------------------|-------------| +| `keyboard_pre_init` | `keyboard_pre_init_<module>` | `keyboard_pre_init_hello_world` | `0.1.0` | +| `keyboard_post_init` | `keyboard_post_init_<module>` | `keyboard_post_init_hello_world` | `0.1.0` | +| `pre_process_record` | `pre_process_record_<module>` | `pre_process_record_hello_world` | `0.1.0` | +| `process_record` | `process_record_<module>` | `process_record_hello_world` | `0.1.0` | +| `post_process_record` | `post_process_record_<module>` | `post_process_record_hello_world` | `0.1.0` | +| `housekeeping_task` | `housekeeping_task_<module>` | `housekeeping_task_hello_world` | `1.0.0` | +| `suspend_power_down` | `suspend_power_down_<module>` | `suspend_power_down_hello_world` | `1.0.0` | +| `suspend_wakeup_init` | `suspend_wakeup_init_<module>` | `suspend_wakeup_init_hello_world` | `1.0.0` | +| `shutdown` | `shutdown_<module>` | `shutdown_hello_world` | `1.0.0` | +| `process_detected_host_os` | `process_detected_host_os_<module>` | `process_detected_host_os_hello_world` | `1.0.0` | +| `default_layer_state_set` | `default_layer_state_set_<module>` | `default_layer_state_set_hello_world` | `1.1.0` | +| `layer_state_set` | `layer_state_set_<module>` | `layer_state_set_hello_world` | `1.1.0` | +| `led_matrix_indicators` | `led_matrix_indicators_<module>` | `led_matrix_indicators_hello_world` | `1.1.0` | +| `led_matrix_indicators_advanced` | `led_matrix_indicators_advanced_<module>` | `led_matrix_indicators_advanced_hello_world` | `1.1.0` | +| `rgb_matrix_indicators` | `rgb_matrix_indicators_<module>` | `rgb_matrix_indicators_hello_world` | `1.1.0` | +| `rgb_matrix_indicators_advanced` | `rgb_matrix_indicators_advanced_<module>` | `rgb_matrix_indicators_advanced_hello_world` | `1.1.0` | +| `pointing_device_init` | `pointing_device_init_<module>` | `pointing_device_init_hello_world` | `1.1.0` | +| `pointing_device_task` | `pointing_device_task_<module>` | `pointing_device_task_hello_world` | `1.1.0` | + ::: info An unspecified API is disregarded if a Community Module does not provide a specialization for it. diff --git a/docs/features/pointing_device.md b/docs/features/pointing_device.md index 0ecf82c8df..a139df9dc4 100644 --- a/docs/features/pointing_device.md +++ b/docs/features/pointing_device.md @@ -419,6 +419,32 @@ The `POINTING_DEVICE_CS_PIN`, `POINTING_DEVICE_SDIO_PIN`, and `POINTING_DEVICE_S Any pointing device with a lift/contact status can integrate inertial cursor feature into its driver, controlled by `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE`. e.g. PMW3360 can use Lift_Stat from Motion register. Note that `POINTING_DEVICE_MOTION_PIN` cannot be used with this feature; continuous polling of `get_report()` is needed to generate glide reports. ::: +## High Resolution Scrolling + +| Setting | Description | Default | +| ---------------------------------------- | ------------------------------------------------------------------------------------------------------------------------- | ------------- | +| `POINTING_DEVICE_HIRES_SCROLL_ENABLE` | (Optional) Enables high resolution scrolling. | _not defined_ | +| `POINTING_DEVICE_HIRES_SCROLL_MULTIPLIER`| (Optional) Resolution mutiplier value used by high resolution scrolling. Must be between 1 and 127, inclusive. | `120` | +| `POINTING_DEVICE_HIRES_SCROLL_EXPONENT` | (Optional) Resolution exponent value used by high resolution scrolling. Must be between 0 and 127, inclusive. | `0` | + +The `POINTING_DEVICE_HIRES_SCROLL_ENABLE` setting enables smooth and continuous scrolling when using trackballs or high-end encoders as mouse wheels (as opposed to the typical stepped behavior of most mouse wheels). +This works by adding a resolution multiplier to the HID descriptor for mouse wheel reports, causing the host computer to interpret each wheel tick sent by the keyboard as a fraction of a normal wheel tick. +The resolution multiplier is set to `1 / (POINTING_DEVICE_HIRES_SCROLL_MULTIPLIER * (10 ^ POINTING_DEVICE_HIRES_SCROLL_EXPONENT))`, which is `1 / 120` by default. +If even smoother scrolling than provided by this default value is desired, first try using `#define POINTING_DEVICE_HIRES_SCROLL_EXPONENT 1` which will result in a multiplier of `1 / 1200`. + +The function `pointing_device_get_hires_scroll_resolution()` can be called to get the pre-computed resolution multiplier value as a `uint16_t`. + +::: warning +High resolution scrolling usually results in larger and/or more frequent mouse reports. This can result in overflow errors and overloading of the host computer's input buffer. +To deal with these issues, define `WHEEL_EXTENDED_REPORT` and throttle the rate at which mouse reports are sent. +::: + +::: warning +Many programs, especially those that implement their own smoothing for scrolling, don't work well when they receive simultaneous vertical and horizontal wheel inputs (e.g. from high resolution drag-scroll using a trackball). +These programs typically implement their smoothing in a way that assumes the user will only scroll in one axis at a time, resulting in slow or jittery motion when trying to scroll at an angle. +This can be addressed by snapping scrolling to one axis at a time. +::: + ## Split Keyboard Configuration The following configuration options are only available when using `SPLIT_POINTING_ENABLE` see [data sync options](split_keyboard#data-sync-options). The rotation and invert `*_RIGHT` options are only used with `POINTING_DEVICE_COMBINED`. If using `POINTING_DEVICE_LEFT` or `POINTING_DEVICE_RIGHT` use the common configuration above to configure your pointing device. diff --git a/docs/features/rgb_matrix.md b/docs/features/rgb_matrix.md index a22f931f1b..ca50fc5257 100644 --- a/docs/features/rgb_matrix.md +++ b/docs/features/rgb_matrix.md @@ -150,6 +150,7 @@ enum rgb_matrix_effects { RGB_MATRIX_SOLID_SPLASH, // Hue & value pulse away from a single key hit then fades value out RGB_MATRIX_SOLID_MULTISPLASH, // Hue & value pulse away from multiple key hits then fades value out RGB_MATRIX_STARLIGHT, // LEDs turn on and off at random at varying brightness, maintaining user set color + RGB_MATRIX_STARLIGHT_SMOOTH, // LEDs slowly increase and decrease in brightness randomly RGB_MATRIX_STARLIGHT_DUAL_HUE, // LEDs turn on and off at random at varying brightness, modifies user set hue by +- 30 RGB_MATRIX_STARLIGHT_DUAL_SAT, // LEDs turn on and off at random at varying brightness, modifies user set saturation by +- 30 RGB_MATRIX_RIVERFLOW, // Modification to breathing animation, offset's animation depending on key location to simulate a river flowing @@ -193,6 +194,7 @@ You can enable a single effect by defining `ENABLE_[EFFECT_NAME]` in your `confi |`#define ENABLE_RGB_MATRIX_PIXEL_FLOW` |Enables `RGB_MATRIX_PIXEL_FLOW` | |`#define ENABLE_RGB_MATRIX_PIXEL_RAIN` |Enables `RGB_MATRIX_PIXEL_RAIN` | |`#define ENABLE_RGB_MATRIX_STARLIGHT` |Enables `RGB_MATRIX_STARLIGHT` | +|`#define ENABLE_RGB_MATRIX_STARLIGHT_SMOOTH` |Enables `RGB_MATRIX_STARLIGHT_SMOOTH` | |`#define ENABLE_RGB_MATRIX_STARLIGHT_DUAL_HUE` |Enables `RGB_MATRIX_STARLIGHT_DUAL_HUE` | |`#define ENABLE_RGB_MATRIX_STARLIGHT_DUAL_SAT` |Enables `RGB_MATRIX_STARLIGHT_DUAL_SAT` | |`#define ENABLE_RGB_MATRIX_RIVERFLOW` |Enables `RGB_MATRIX_RIVERFLOW` | diff --git a/docs/features/stenography.md b/docs/features/stenography.md index c6c2155a9a..7fd245d59a 100644 --- a/docs/features/stenography.md +++ b/docs/features/stenography.md @@ -8,7 +8,7 @@ The [Open Steno Project](https://www.openstenoproject.org/) has built an open-so Plover can work with any standard QWERTY keyboard, although it is more efficient if the keyboard supports NKRO (n-key rollover) to allow Plover to see all the pressed keys at once. An example keymap for Plover can be found in `planck/keymaps/default`. Switching to the `PLOVER` layer adjusts the position of the keyboard to support the number bar. -To enable NKRO, add `NKRO_ENABLE = yes` in your `rules.mk` and make sure to press `NK_ON` to turn it on because `NKRO_ENABLE = yes` merely adds the possibility of switching to NKRO mode but it doesn't automatically switch to it. If you want to automatically switch, add `#define FORCE_NKRO` in your `config.h`. +To enable NKRO, add `NKRO_ENABLE = yes` in your `rules.mk` and make sure to press `NK_ON` to turn it on because `NKRO_ENABLE = yes` merely adds the possibility of switching to NKRO mode but it doesn't automatically switch to it. If you want to automatically switch, add `#define NKRO_DEFAULT_ON true` in your `config.h`. You may also need to adjust your layout, either in QMK or in Plover, if you have anything other than a standard layout. You may also want to purchase some steno-friendly keycaps to make it easier to hit multiple keys. |