diff options
Diffstat (limited to 'docs/uart_driver.md')
-rw-r--r-- | docs/uart_driver.md | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/docs/uart_driver.md b/docs/uart_driver.md index a44f2c28d9..a88278d543 100644 --- a/docs/uart_driver.md +++ b/docs/uart_driver.md @@ -4,6 +4,18 @@ The UART drivers used in QMK have a set of common functions to allow portability Currently, this driver does not support enabling hardware flow control (the `RTS` and `CTS` pins) if available, but may do so in future. +## Usage :id=usage + +In most cases, the UART driver code is automatically included if you are using a feature or driver which requires it. + +However, if you need to use the driver standalone, add the following to your `rules.mk`: + +```make +UART_DRIVER_REQUIRED = yes +``` + +You can then call the UART API by including `uart.h` in your code. + ## AVR Configuration :id=avr-configuration No special setup is required - just connect the `RX` and `TX` pins of your UART device to the opposite pins on the MCU: |