diff options
Diffstat (limited to 'drivers/led/issi/is31fl3729.c')
-rw-r--r-- | drivers/led/issi/is31fl3729.c | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/drivers/led/issi/is31fl3729.c b/drivers/led/issi/is31fl3729.c new file mode 100644 index 0000000000..80acb22fa2 --- /dev/null +++ b/drivers/led/issi/is31fl3729.c @@ -0,0 +1,219 @@ +/* Copyright 2024 HorrorTroll <https://github.com/HorrorTroll> + * Copyright 2024 Harrison Chan (Xelus) + * Copyright 2024 Dimitris Mantzouranis <[email protected]> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "is31fl3729.h" +#include "i2c_master.h" +#include "gpio.h" +#include "wait.h" + +#define IS31FL3729_PWM_REGISTER_COUNT 143 +#define IS31FL3729_SCALING_REGISTER_COUNT 16 + +#ifndef IS31FL3729_I2C_TIMEOUT +# define IS31FL3729_I2C_TIMEOUT 100 +#endif + +#ifndef IS31FL3729_I2C_PERSISTENCE +# define IS31FL3729_I2C_PERSISTENCE 0 +#endif + +#ifndef IS31FL3729_CONFIGURATION +# define IS31FL3729_CONFIGURATION IS31FL3729_CONFIG_SWS_15_9 +#endif + +#ifndef IS31FL3729_GLOBAL_CURRENT +# define IS31FL3729_GLOBAL_CURRENT 0x40 +#endif + +#ifndef IS31FL3729_SW_PULLDOWN +# define IS31FL3729_SW_PULLDOWN IS31FL3729_SW_PULLDOWN_2K_OHM_SW_OFF +#endif + +#ifndef IS31FL3729_CS_PULLUP +# define IS31FL3729_CS_PULLUP IS31FL3729_CS_PULLUP_2K_OHM_CS_OFF +#endif + +#ifndef IS31FL3729_SPREAD_SPECTRUM +# define IS31FL3729_SPREAD_SPECTRUM IS31FL3729_SPREAD_SPECTRUM_DISABLE +#endif + +#ifndef IS31FL3729_SPREAD_SPECTRUM_RANGE +# define IS31FL3729_SPREAD_SPECTRUM_RANGE IS31FL3729_SPREAD_SPECTRUM_RANGE_5_PERCENT +#endif + +#ifndef IS31FL3729_SPREAD_SPECTRUM_CYCLE_TIME +# define IS31FL3729_SPREAD_SPECTRUM_CYCLE_TIME IS31FL3729_SPREAD_SPECTRUM_CYCLE_TIME_1980_US +#endif + +#ifndef IS31FL3729_PWM_FREQUENCY +# define IS31FL3729_PWM_FREQUENCY IS31FL3729_PWM_FREQUENCY_32K_HZ +#endif + +const uint8_t i2c_addresses[IS31FL3729_DRIVER_COUNT] = { + IS31FL3729_I2C_ADDRESS_1, +#ifdef IS31FL3729_I2C_ADDRESS_2 + IS31FL3729_I2C_ADDRESS_2, +# ifdef IS31FL3729_I2C_ADDRESS_3 + IS31FL3729_I2C_ADDRESS_3, +# ifdef IS31FL3729_I2C_ADDRESS_4 + IS31FL3729_I2C_ADDRESS_4, +# endif +# endif +#endif +}; + +// These buffers match the PWM & scaling registers. +// Storing them like this is optimal for I2C transfers to the registers. +typedef struct is31fl3729_driver_t { + uint8_t pwm_buffer[IS31FL3729_PWM_REGISTER_COUNT]; + bool pwm_buffer_dirty; + uint8_t scaling_buffer[IS31FL3729_SCALING_REGISTER_COUNT]; + bool scaling_buffer_dirty; +} PACKED is31fl3729_driver_t; + +is31fl3729_driver_t driver_buffers[IS31FL3729_DRIVER_COUNT] = {{ + .pwm_buffer = {0}, + .pwm_buffer_dirty = false, + .scaling_buffer = {0}, + .scaling_buffer_dirty = false, +}}; + +void is31fl3729_write_register(uint8_t index, uint8_t reg, uint8_t data) { +#if IS31FL3729_I2C_PERSISTENCE > 0 + for (uint8_t i = 0; i < IS31FL3729_I2C_PERSISTENCE; i++) { + if (i2c_write_register(i2c_addresses[index] << 1, reg, &data, 1, IS31FL3729_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break; + } +#else + i2c_write_register(i2c_addresses[index] << 1, reg, &data, 1, IS31FL3729_I2C_TIMEOUT); +#endif +} + +void is31fl3729_write_pwm_buffer(uint8_t index) { + // Transmit PWM registers in 11 transfers of 13 bytes. + + // Iterate over the pwm_buffer contents at 13 byte intervals. + for (uint8_t i = 0; i <= IS31FL3729_PWM_REGISTER_COUNT; i += 13) { +#if IS31FL3729_I2C_PERSISTENCE > 0 + for (uint8_t j = 0; j < IS31FL3729_I2C_PERSISTENCE; j++) { + if (i2c_write_register(i2c_addresses[index] << 1, IS31FL3729_REG_PWM + i, driver_buffers[index].pwm_buffer + i, 13, IS31FL3729_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break; + } +#else + i2c_write_register(i2c_addresses[index] << 1, IS31FL3729_REG_PWM + i, driver_buffers[index].pwm_buffer + i, 13, IS31FL3729_I2C_TIMEOUT); +#endif + } +} + +void is31fl3729_init_drivers(void) { + i2c_init(); + +#if defined(IS31FL3729_SDB_PIN) + gpio_set_pin_output(IS31FL3729_SDB_PIN); + gpio_write_pin_high(IS31FL3729_SDB_PIN); +#endif + + for (uint8_t i = 0; i < IS31FL3729_DRIVER_COUNT; i++) { + is31fl3729_init(i); + } + + for (int i = 0; i < IS31FL3729_LED_COUNT; i++) { + is31fl3729_set_scaling_register(i, 0xFF, 0xFF, 0xFF); + } + + for (uint8_t i = 0; i < IS31FL3729_DRIVER_COUNT; i++) { + is31fl3729_update_scaling_registers(i); + } +} + +void is31fl3729_init(uint8_t index) { + // In order to avoid the LEDs being driven with garbage data + // in the LED driver's PWM registers, shutdown is enabled last. + // Set up the mode and other settings, clear the PWM registers, + // then disable software shutdown. + + is31fl3729_write_register(index, IS31FL3729_REG_PULLDOWNUP, ((IS31FL3729_SW_PULLDOWN & 0b111) << 4) | (IS31FL3729_CS_PULLUP & 0b111)); + is31fl3729_write_register(index, IS31FL3729_REG_SPREAD_SPECTRUM, ((IS31FL3729_SPREAD_SPECTRUM & 0b1) << 4) | ((IS31FL3729_SPREAD_SPECTRUM_RANGE & 0b11) << 2) | (IS31FL3729_SPREAD_SPECTRUM_CYCLE_TIME & 0b11)); + is31fl3729_write_register(index, IS31FL3729_REG_PWM_FREQUENCY, IS31FL3729_PWM_FREQUENCY); + is31fl3729_write_register(index, IS31FL3729_REG_GLOBAL_CURRENT, IS31FL3729_GLOBAL_CURRENT); + is31fl3729_write_register(index, IS31FL3729_REG_CONFIGURATION, IS31FL3729_CONFIGURATION); + + // Wait 10ms to ensure the device has woken up. + wait_ms(10); +} + +void is31fl3729_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + is31fl3729_led_t led; + if (index >= 0 && index < IS31FL3729_LED_COUNT) { + memcpy_P(&led, (&g_is31fl3729_leds[index]), sizeof(led)); + + if (driver_buffers[led.driver].pwm_buffer[led.r] == red && driver_buffers[led.driver].pwm_buffer[led.g] == green && driver_buffers[led.driver].pwm_buffer[led.b] == blue) { + return; + } + + driver_buffers[led.driver].pwm_buffer[led.r] = red; + driver_buffers[led.driver].pwm_buffer[led.g] = green; + driver_buffers[led.driver].pwm_buffer[led.b] = blue; + driver_buffers[led.driver].pwm_buffer_dirty = true; + } +} + +void is31fl3729_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { + for (int i = 0; i < IS31FL3729_LED_COUNT; i++) { + is31fl3729_set_color(i, red, green, blue); + } +} + +void is31fl3729_set_scaling_register(uint8_t index, uint8_t red, uint8_t green, uint8_t blue) { + is31fl3729_led_t led; + memcpy_P(&led, (&g_is31fl3729_leds[index]), sizeof(led)); + + // need to do a bit of checking here since 3729 scaling is per CS pin. + // not the usual per RGB key as per other ISSI drivers + // only enable them, since they should be default disabled + int cs_red = (led.r & 0x0F) - 1; + int cs_green = (led.g & 0x0F) - 1; + int cs_blue = (led.b & 0x0F) - 1; + + driver_buffers[led.driver].scaling_buffer[cs_red] = red; + driver_buffers[led.driver].scaling_buffer[cs_green] = green; + driver_buffers[led.driver].scaling_buffer[cs_blue] = blue; + driver_buffers[led.driver].scaling_buffer_dirty = true; +} + +void is31fl3729_update_pwm_buffers(uint8_t index) { + if (driver_buffers[index].pwm_buffer_dirty) { + is31fl3729_write_pwm_buffer(index); + + driver_buffers[index].pwm_buffer_dirty = false; + } +} + +void is31fl3729_update_scaling_registers(uint8_t index) { + if (driver_buffers[index].scaling_buffer_dirty) { + for (uint8_t i = 0; i < IS31FL3729_SCALING_REGISTER_COUNT; i++) { + is31fl3729_write_register(index, IS31FL3729_REG_SCALING + i, driver_buffers[index].scaling_buffer[i]); + } + + driver_buffers[index].scaling_buffer_dirty = false; + } +} + +void is31fl3729_flush(void) { + for (uint8_t i = 0; i < IS31FL3729_DRIVER_COUNT; i++) { + is31fl3729_update_pwm_buffers(i); + } +} |