diff options
Diffstat (limited to 'keyboards/3w6')
-rw-r--r-- | keyboards/3w6/rev1/matrix.c | 6 | ||||
-rw-r--r-- | keyboards/3w6/rev2/keymaps/default_pimoroni/pimoroni_trackball.c | 4 | ||||
-rw-r--r-- | keyboards/3w6/rev2/keymaps/default_pimoroni/pimoroni_trackball.h | 4 | ||||
-rw-r--r-- | keyboards/3w6/rev2/matrix.c | 6 |
4 files changed, 9 insertions, 11 deletions
diff --git a/keyboards/3w6/rev1/matrix.c b/keyboards/3w6/rev1/matrix.c index 8bb6c77aaa..aa3e43fbe0 100644 --- a/keyboards/3w6/rev1/matrix.c +++ b/keyboards/3w6/rev1/matrix.c @@ -70,7 +70,7 @@ uint8_t init_tca9555(void) { // This means: we will write on pins 0 to 2 on port 1. read rest 0b11111000, }; - tca9555_status = i2c_writeReg(I2C_ADDR, IODIRA, conf, 2, I2C_TIMEOUT); + tca9555_status = i2c_write_register(I2C_ADDR, IODIRA, conf, 2, I2C_TIMEOUT); return tca9555_status; } @@ -189,7 +189,7 @@ static matrix_row_t read_cols(uint8_t row) { } else { uint8_t data = 0; uint8_t ports[2] = {0}; - tca9555_status = i2c_readReg(I2C_ADDR, IREGP0, ports, 2, I2C_TIMEOUT); + tca9555_status = i2c_read_register(I2C_ADDR, IREGP0, ports, 2, I2C_TIMEOUT); if (tca9555_status) { // if there was an error // do nothing return 0; @@ -252,7 +252,7 @@ static void select_row(uint8_t row) { } uint8_t ports[2] = {port0, port1}; - tca9555_status = i2c_writeReg(I2C_ADDR, OREGP0, ports, 2, I2C_TIMEOUT); + tca9555_status = i2c_write_register(I2C_ADDR, OREGP0, ports, 2, I2C_TIMEOUT); // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one. // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus. } diff --git a/keyboards/3w6/rev2/keymaps/default_pimoroni/pimoroni_trackball.c b/keyboards/3w6/rev2/keymaps/default_pimoroni/pimoroni_trackball.c index a6661cdc07..0db58bfabd 100644 --- a/keyboards/3w6/rev2/keymaps/default_pimoroni/pimoroni_trackball.c +++ b/keyboards/3w6/rev2/keymaps/default_pimoroni/pimoroni_trackball.c @@ -38,7 +38,7 @@ static uint16_t i2c_timeout_timer; void trackball_set_rgbw(uint8_t red, uint8_t green, uint8_t blue, uint8_t white) { uint8_t data[] = {0x00, red, green, blue, white}; - i2c_transmit(TRACKBALL_WRITE, data, sizeof(data), I2C_TIMEOUT); + i2c_transmit(TRACKBALL_ADDRESS, data, sizeof(data), I2C_TIMEOUT); } int16_t mouse_offset(uint8_t positive, uint8_t negative, int16_t scale) { @@ -120,7 +120,7 @@ bool pointing_device_task(void) { static uint16_t debounce_timer; uint8_t state[5] = {}; if (timer_elapsed(i2c_timeout_timer) > I2C_WAITCHECK) { - if (i2c_readReg(TRACKBALL_WRITE, 0x04, state, 5, I2C_TIMEOUT) == I2C_STATUS_SUCCESS) { + if (i2c_read_register(TRACKBALL_ADDRESS, 0x04, state, 5, I2C_TIMEOUT) == I2C_STATUS_SUCCESS) { if (!state[4] && !debounce) { if (scrolling) { #ifdef PIMORONI_TRACKBALL_INVERT_X diff --git a/keyboards/3w6/rev2/keymaps/default_pimoroni/pimoroni_trackball.h b/keyboards/3w6/rev2/keymaps/default_pimoroni/pimoroni_trackball.h index cfcd5a47a1..ca2559bec7 100644 --- a/keyboards/3w6/rev2/keymaps/default_pimoroni/pimoroni_trackball.h +++ b/keyboards/3w6/rev2/keymaps/default_pimoroni/pimoroni_trackball.h @@ -20,10 +20,8 @@ #include "pointing_device.h" #ifndef TRACKBALL_ADDRESS -# define TRACKBALL_ADDRESS 0x0A +# define TRACKBALL_ADDRESS (0x0A << 1) #endif -#define TRACKBALL_WRITE ((TRACKBALL_ADDRESS << 1) | I2C_WRITE) -#define TRACKBALL_READ ((TRACKBALL_ADDRESS << 1) | I2C_READ) void trackball_set_rgbw(uint8_t red, uint8_t green, uint8_t blue, uint8_t white); void trackball_check_click(bool pressed, report_mouse_t *mouse); diff --git a/keyboards/3w6/rev2/matrix.c b/keyboards/3w6/rev2/matrix.c index 49cb09a9f8..da7a5344e5 100644 --- a/keyboards/3w6/rev2/matrix.c +++ b/keyboards/3w6/rev2/matrix.c @@ -70,7 +70,7 @@ uint8_t init_tca9555(void) { // This means: we will write on pins 0 to 3 on port 1. read rest 0b11110000, }; - tca9555_status = i2c_writeReg(I2C_ADDR, IODIRA, conf, 2, I2C_TIMEOUT); + tca9555_status = i2c_write_register(I2C_ADDR, IODIRA, conf, 2, I2C_TIMEOUT); return tca9555_status; } @@ -189,7 +189,7 @@ static matrix_row_t read_cols(uint8_t row) { } else { uint8_t data = 0; uint8_t port0 = 0; - tca9555_status = i2c_readReg(I2C_ADDR, IREGP0, &port0, 1, I2C_TIMEOUT); + tca9555_status = i2c_read_register(I2C_ADDR, IREGP0, &port0, 1, I2C_TIMEOUT); if (tca9555_status) { // if there was an error // do nothing return 0; @@ -250,7 +250,7 @@ static void select_row(uint8_t row) { default: break; } - tca9555_status = i2c_writeReg(I2C_ADDR, OREGP1, &port1, 1, I2C_TIMEOUT); + tca9555_status = i2c_write_register(I2C_ADDR, OREGP1, &port1, 1, I2C_TIMEOUT); // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one. // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus. } |