aboutsummaryrefslogtreecommitdiff
path: root/keyboards/cipulot/common/ec_switch_matrix.c
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/cipulot/common/ec_switch_matrix.c')
-rw-r--r--keyboards/cipulot/common/ec_switch_matrix.c38
1 files changed, 19 insertions, 19 deletions
diff --git a/keyboards/cipulot/common/ec_switch_matrix.c b/keyboards/cipulot/common/ec_switch_matrix.c
index 845ef99d22..33123bd236 100644
--- a/keyboards/cipulot/common/ec_switch_matrix.c
+++ b/keyboards/cipulot/common/ec_switch_matrix.c
@@ -54,19 +54,19 @@ static adc_mux adcMux;
void init_row(void) {
// Set all row pins as output and low
for (uint8_t idx = 0; idx < MATRIX_ROWS; idx++) {
- setPinOutput(row_pins[idx]);
- writePinLow(row_pins[idx]);
+ gpio_set_pin_output(row_pins[idx]);
+ gpio_write_pin_low(row_pins[idx]);
}
}
// Initialize the multiplexers
void init_amux(void) {
for (uint8_t idx = 0; idx < AMUX_COUNT; idx++) {
- setPinOutput(amux_en_pins[idx]);
- writePinLow(amux_en_pins[idx]);
+ gpio_set_pin_output(amux_en_pins[idx]);
+ gpio_write_pin_low(amux_en_pins[idx]);
}
for (uint8_t idx = 0; idx < AMUX_SEL_PINS_COUNT; idx++) {
- setPinOutput(amux_sel_pins[idx]);
+ gpio_set_pin_output(amux_sel_pins[idx]);
}
}
@@ -75,13 +75,13 @@ void select_amux_channel(uint8_t channel, uint8_t col) {
// Get the channel for the specified multiplexer
uint8_t ch = amux_n_col_channels[channel][col];
// momentarily disable specified multiplexer
- writePinHigh(amux_en_pins[channel]);
+ gpio_write_pin_high(amux_en_pins[channel]);
// Select the multiplexer channel
for (uint8_t i = 0; i < AMUX_SEL_PINS_COUNT; i++) {
- writePin(amux_sel_pins[i], ch & (1 << i));
+ gpio_write_pin(amux_sel_pins[i], ch & (1 << i));
}
// re enable specified multiplexer
- writePinLow(amux_en_pins[channel]);
+ gpio_write_pin_low(amux_en_pins[channel]);
}
// Disable all the unused multiplexers
@@ -89,28 +89,28 @@ void disable_unused_amux(uint8_t channel) {
// disable all the other multiplexers apart from the current selected one
for (uint8_t idx = 0; idx < AMUX_COUNT; idx++) {
if (idx != channel) {
- writePinHigh(amux_en_pins[idx]);
+ gpio_write_pin_high(amux_en_pins[idx]);
}
}
}
// Discharge the peak hold capacitor
void discharge_capacitor(void) {
#ifdef OPEN_DRAIN_SUPPORT
- writePinLow(DISCHARGE_PIN);
+ gpio_write_pin_low(DISCHARGE_PIN);
#else
- writePinLow(DISCHARGE_PIN);
- setPinOutput(DISCHARGE_PIN);
+ gpio_write_pin_low(DISCHARGE_PIN);
+ gpio_set_pin_output(DISCHARGE_PIN);
#endif
}
// Charge the peak hold capacitor
void charge_capacitor(uint8_t row) {
#ifdef OPEN_DRAIN_SUPPORT
- writePinHigh(DISCHARGE_PIN);
+ gpio_write_pin_high(DISCHARGE_PIN);
#else
- setPinInput(DISCHARGE_PIN);
+ gpio_set_pin_input(DISCHARGE_PIN);
#endif
- writePinHigh(row_pins[row]);
+ gpio_write_pin_high(row_pins[row]);
}
// Initialize the peripherals pins
@@ -123,11 +123,11 @@ int ec_init(void) {
adc_read(adcMux);
// Initialize discharge pin as discharge mode
- writePinLow(DISCHARGE_PIN);
+ gpio_write_pin_low(DISCHARGE_PIN);
#ifdef OPEN_DRAIN_SUPPORT
- setPinOutputOpenDrain(DISCHARGE_PIN);
+ gpio_set_pin_output_open_drain(DISCHARGE_PIN);
#else
- setPinOutput(DISCHARGE_PIN);
+ gpio_set_pin_output(DISCHARGE_PIN);
#endif
// Initialize drive lines
@@ -212,7 +212,7 @@ uint16_t ec_readkey_raw(uint8_t channel, uint8_t row, uint8_t col) {
select_amux_channel(channel, col);
// Set the row pin to low state to avoid ghosting
- writePinLow(row_pins[row]);
+ gpio_write_pin_low(row_pins[row]);
ATOMIC_BLOCK_FORCEON {
// Set the row pin to high state and have capacitor charge