aboutsummaryrefslogtreecommitdiff
path: root/keyboards/ibm/model_m
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/ibm/model_m')
-rw-r--r--keyboards/ibm/model_m/ashpil_usbc/ashpil_usbc.c18
-rw-r--r--keyboards/ibm/model_m/ashpil_usbc/keyboard.json (renamed from keyboards/ibm/model_m/ashpil_usbc/info.json)8
-rw-r--r--keyboards/ibm/model_m/ashpil_usbc/rules.mk12
-rw-r--r--keyboards/ibm/model_m/modelh/keyboard.json (renamed from keyboards/ibm/model_m/modelh/info.json)0
-rw-r--r--keyboards/ibm/model_m/modelh/modelh.c4
-rw-r--r--keyboards/ibm/model_m/modelh/rules.mk0
-rw-r--r--keyboards/ibm/model_m/mschwingen/info.json12
-rw-r--r--keyboards/ibm/model_m/mschwingen/led_ffc/keyboard.json2
-rw-r--r--keyboards/ibm/model_m/mschwingen/led_ffc/rules.mk1
-rw-r--r--keyboards/ibm/model_m/mschwingen/led_wired/keyboard.json2
-rw-r--r--keyboards/ibm/model_m/mschwingen/led_wired/rules.mk1
-rw-r--r--keyboards/ibm/model_m/mschwingen/led_ws2812/keyboard.json2
-rw-r--r--keyboards/ibm/model_m/mschwingen/matrix.c15
-rw-r--r--keyboards/ibm/model_m/mschwingen/mschwingen.c37
-rw-r--r--keyboards/ibm/model_m/mschwingen/post_rules.mk2
-rw-r--r--keyboards/ibm/model_m/mschwingen/rules.mk22
-rw-r--r--keyboards/ibm/model_m/teensy2/keyboard.json (renamed from keyboards/ibm/model_m/teensy2/info.json)8
-rw-r--r--keyboards/ibm/model_m/teensy2/rules.mk12
-rw-r--r--keyboards/ibm/model_m/teensypp/keyboard.json (renamed from keyboards/ibm/model_m/teensypp/info.json)5
-rw-r--r--keyboards/ibm/model_m/teensypp/rules.mk12
-rw-r--r--keyboards/ibm/model_m/teensypp/teensypp.c18
-rw-r--r--keyboards/ibm/model_m/yugo_m/keyboard.json (renamed from keyboards/ibm/model_m/yugo_m/info.json)8
-rw-r--r--keyboards/ibm/model_m/yugo_m/rules.mk12
-rw-r--r--keyboards/ibm/model_m/yugo_m/yugo_m.c12
24 files changed, 101 insertions, 124 deletions
diff --git a/keyboards/ibm/model_m/ashpil_usbc/ashpil_usbc.c b/keyboards/ibm/model_m/ashpil_usbc/ashpil_usbc.c
index 92b577635c..8bdcfe070a 100644
--- a/keyboards/ibm/model_m/ashpil_usbc/ashpil_usbc.c
+++ b/keyboards/ibm/model_m/ashpil_usbc/ashpil_usbc.c
@@ -18,19 +18,19 @@
void keyboard_pre_init_kb(void) {
/* Setting status LEDs pins to output and +5V (off) */
- setPinOutput(D5);
- setPinOutput(D6);
- setPinOutput(D7);
- writePinHigh(D5);
- writePinHigh(D6);
- writePinHigh(D7);
+ gpio_set_pin_output(D5);
+ gpio_set_pin_output(D6);
+ gpio_set_pin_output(D7);
+ gpio_write_pin_high(D5);
+ gpio_write_pin_high(D6);
+ gpio_write_pin_high(D7);
}
bool led_update_kb(led_t led_state) {
if(led_update_user(led_state)) {
- writePin(D5, !led_state.num_lock);
- writePin(D6, !led_state.caps_lock);
- writePin(D7, !led_state.scroll_lock);
+ gpio_write_pin(D5, !led_state.num_lock);
+ gpio_write_pin(D6, !led_state.caps_lock);
+ gpio_write_pin(D7, !led_state.scroll_lock);
}
return true;
}
diff --git a/keyboards/ibm/model_m/ashpil_usbc/info.json b/keyboards/ibm/model_m/ashpil_usbc/keyboard.json
index ffdb608edc..451589017e 100644
--- a/keyboards/ibm/model_m/ashpil_usbc/info.json
+++ b/keyboards/ibm/model_m/ashpil_usbc/keyboard.json
@@ -8,6 +8,14 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "features": {
+ "bootmagic": true,
+ "command": false,
+ "console": false,
+ "extrakey": true,
+ "mousekey": false,
+ "nkro": false
+ },
"matrix_pins": {
"cols": ["E6", "E7", "F0", "F1", "F2", "F3", "F4", "F5", "F6", "F7", "A0", "A1", "A2", "A3", "A4", "A5"],
"rows": ["C7", "C6", "C5", "C4", "C3", "C2", "C1", "C0"]
diff --git a/keyboards/ibm/model_m/ashpil_usbc/rules.mk b/keyboards/ibm/model_m/ashpil_usbc/rules.mk
deleted file mode 100644
index 6fe874e748..0000000000
--- a/keyboards/ibm/model_m/ashpil_usbc/rules.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
-AUDIO_ENABLE = no # Audio output
diff --git a/keyboards/ibm/model_m/modelh/info.json b/keyboards/ibm/model_m/modelh/keyboard.json
index 6d55d5c6bd..6d55d5c6bd 100644
--- a/keyboards/ibm/model_m/modelh/info.json
+++ b/keyboards/ibm/model_m/modelh/keyboard.json
diff --git a/keyboards/ibm/model_m/modelh/modelh.c b/keyboards/ibm/model_m/modelh/modelh.c
index 5384b37338..4bf3d12e6a 100644
--- a/keyboards/ibm/model_m/modelh/modelh.c
+++ b/keyboards/ibm/model_m/modelh/modelh.c
@@ -18,8 +18,8 @@
void keyboard_pre_init_kb(void) {
- setPinOutput(MODELH_STATUS_LED);
- writePin(MODELH_STATUS_LED, 0);
+ gpio_set_pin_output(MODELH_STATUS_LED);
+ gpio_write_pin(MODELH_STATUS_LED, 0);
keyboard_pre_init_user();
}
diff --git a/keyboards/ibm/model_m/modelh/rules.mk b/keyboards/ibm/model_m/modelh/rules.mk
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/ibm/model_m/modelh/rules.mk
+++ /dev/null
diff --git a/keyboards/ibm/model_m/mschwingen/info.json b/keyboards/ibm/model_m/mschwingen/info.json
index ce740e4a54..0deb57ed03 100644
--- a/keyboards/ibm/model_m/mschwingen/info.json
+++ b/keyboards/ibm/model_m/mschwingen/info.json
@@ -16,6 +16,18 @@
},
"processor": "atmega32u4",
"bootloader": "lufa-dfu",
+ "features": {
+ "bootmagic": false,
+ "mousekey": true,
+ "extrakey": true,
+ "console": true,
+ "command": true,
+ "key_lock": true,
+ "dynamic_macro": true
+ },
+ "build": {
+ "lto": true
+ },
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/ibm/model_m/mschwingen/led_ffc/keyboard.json b/keyboards/ibm/model_m/mschwingen/led_ffc/keyboard.json
new file mode 100644
index 0000000000..2c63c08510
--- /dev/null
+++ b/keyboards/ibm/model_m/mschwingen/led_ffc/keyboard.json
@@ -0,0 +1,2 @@
+{
+}
diff --git a/keyboards/ibm/model_m/mschwingen/led_ffc/rules.mk b/keyboards/ibm/model_m/mschwingen/led_ffc/rules.mk
deleted file mode 100644
index 8b13789179..0000000000
--- a/keyboards/ibm/model_m/mschwingen/led_ffc/rules.mk
+++ /dev/null
@@ -1 +0,0 @@
-
diff --git a/keyboards/ibm/model_m/mschwingen/led_wired/keyboard.json b/keyboards/ibm/model_m/mschwingen/led_wired/keyboard.json
new file mode 100644
index 0000000000..2c63c08510
--- /dev/null
+++ b/keyboards/ibm/model_m/mschwingen/led_wired/keyboard.json
@@ -0,0 +1,2 @@
+{
+}
diff --git a/keyboards/ibm/model_m/mschwingen/led_wired/rules.mk b/keyboards/ibm/model_m/mschwingen/led_wired/rules.mk
deleted file mode 100644
index 8b13789179..0000000000
--- a/keyboards/ibm/model_m/mschwingen/led_wired/rules.mk
+++ /dev/null
@@ -1 +0,0 @@
-
diff --git a/keyboards/ibm/model_m/mschwingen/led_ws2812/keyboard.json b/keyboards/ibm/model_m/mschwingen/led_ws2812/keyboard.json
new file mode 100644
index 0000000000..2c63c08510
--- /dev/null
+++ b/keyboards/ibm/model_m/mschwingen/led_ws2812/keyboard.json
@@ -0,0 +1,2 @@
+{
+}
diff --git a/keyboards/ibm/model_m/mschwingen/matrix.c b/keyboards/ibm/model_m/mschwingen/matrix.c
index 361803edec..ae032a00a0 100644
--- a/keyboards/ibm/model_m/mschwingen/matrix.c
+++ b/keyboards/ibm/model_m/mschwingen/matrix.c
@@ -14,12 +14,9 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdint.h>
-#include <stdbool.h>
#include "util.h"
#include "matrix.h"
#include "debounce.h"
-#include "quantum.h"
#include "spi_master.h"
#include "print.h"
#include "mschwingen.h"
@@ -34,15 +31,15 @@ static uint16_t row_bits[MATRIX_ROWS] = {
static const pin_t col_pins[MATRIX_COLS] = {D1, D4, D7, B4, F7, F6, F5, F4};
static void select_col(uint8_t col) {
- setPinOutput(col_pins[col]);
- writePinLow(col_pins[col]);
+ gpio_set_pin_output(col_pins[col]);
+ gpio_write_pin_low(col_pins[col]);
}
-static void unselect_col(uint8_t col) { setPinInputHigh(col_pins[col]); }
+static void unselect_col(uint8_t col) { gpio_set_pin_input_high(col_pins[col]); }
static void unselect_cols(void) {
for (uint8_t x = 0; x < MATRIX_COLS; x++) {
- setPinInputHigh(col_pins[x]);
+ gpio_set_pin_input_high(col_pins[x]);
}
}
@@ -54,8 +51,8 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
select_col(current_col);
matrix_io_delay();
- writePinLow(SR_LOAD_PIN);
- writePinHigh(SR_LOAD_PIN);
+ gpio_write_pin_low(SR_LOAD_PIN);
+ gpio_write_pin_high(SR_LOAD_PIN);
row_data = spi_read() << 8;
row_data |= spi_read();
diff --git a/keyboards/ibm/model_m/mschwingen/mschwingen.c b/keyboards/ibm/model_m/mschwingen/mschwingen.c
index 03dfcdc2f2..7112ab63a5 100644
--- a/keyboards/ibm/model_m/mschwingen/mschwingen.c
+++ b/keyboards/ibm/model_m/mschwingen/mschwingen.c
@@ -74,12 +74,12 @@ void sleep_led_toggle(void) {}
void sleep_led_disable(void) {
suspend_active = false;
- writePinHigh(MODELM_STATUS_LED);
+ gpio_write_pin_high(MODELM_STATUS_LED);
}
void sleep_led_enable(void) {
suspend_active = true;
- writePinLow(MODELM_STATUS_LED);
+ gpio_write_pin_low(MODELM_STATUS_LED);
#ifdef KEYBOARD_ibm_model_m_mschwingen_led_ws2812
led[0] = black;
led[1] = black;
@@ -90,18 +90,19 @@ void sleep_led_enable(void) {
void keyboard_pre_init_kb(void) {
#ifdef KEYBOARD_ibm_model_m_mschwingen_led_ws2812
+ ws2812_init();
ws2812_setleds(led, RGBLIGHT_LED_COUNT);
#else
/* Set status LEDs pins to output and Low (on) */
- setPinOutput(MODELM_LED_CAPSLOCK);
- setPinOutput(MODELM_LED_SCROLLOCK);
- setPinOutput(MODELM_LED_NUMLOCK);
- writePinLow(MODELM_LED_CAPSLOCK);
- writePinLow(MODELM_LED_SCROLLOCK);
- writePinLow(MODELM_LED_NUMLOCK);
+ gpio_set_pin_output(MODELM_LED_CAPSLOCK);
+ gpio_set_pin_output(MODELM_LED_SCROLLOCK);
+ gpio_set_pin_output(MODELM_LED_NUMLOCK);
+ gpio_write_pin_low(MODELM_LED_CAPSLOCK);
+ gpio_write_pin_low(MODELM_LED_SCROLLOCK);
+ gpio_write_pin_low(MODELM_LED_NUMLOCK);
#endif
- setPinOutput(MODELM_STATUS_LED);
- writePinHigh(MODELM_STATUS_LED);
+ gpio_set_pin_output(MODELM_STATUS_LED);
+ gpio_write_pin_high(MODELM_STATUS_LED);
_delay_ms(50);
#ifdef UART_DEBUG
uart_init(115200);
@@ -109,10 +110,10 @@ void keyboard_pre_init_kb(void) {
uprintf("\r\nHello world!\r\n");
#endif
- setPinOutput(SR_LOAD_PIN);
- setPinOutput(SR_CLK_PIN);
- setPinOutput(SR_DOUT_PIN); // MOSI - unused
- writePinLow(SR_CLK_PIN);
+ gpio_set_pin_output(SR_LOAD_PIN);
+ gpio_set_pin_output(SR_CLK_PIN);
+ gpio_set_pin_output(SR_DOUT_PIN); // MOSI - unused
+ gpio_write_pin_low(SR_CLK_PIN);
}
#ifdef KEYBOARD_ibm_model_m_mschwingen_led_ws2812
@@ -186,9 +187,9 @@ bool led_update_kb(led_t led_state) {
dprintf("LED Update: %d %d %d", led_state.num_lock, led_state.caps_lock, led_state.scroll_lock);
if (led_update_user(led_state)) {
- if (!isRecording) writePin(MODELM_LED_NUMLOCK, !led_state.num_lock);
- writePin(MODELM_LED_CAPSLOCK, !led_state.caps_lock);
- writePin(MODELM_LED_SCROLLOCK, !led_state.scroll_lock);
+ if (!isRecording) gpio_write_pin(MODELM_LED_NUMLOCK, !led_state.num_lock);
+ gpio_write_pin(MODELM_LED_CAPSLOCK, !led_state.caps_lock);
+ gpio_write_pin(MODELM_LED_SCROLLOCK, !led_state.scroll_lock);
}
return true;
}
@@ -197,7 +198,7 @@ void update_layer_leds(void) {
if (isRecording && timer_elapsed(blink_cycle_timer) > 150) {
blink_state = !blink_state;
blink_cycle_timer = timer_read();
- writePin(MODELM_LED_NUMLOCK, blink_state);
+ gpio_write_pin(MODELM_LED_NUMLOCK, blink_state);
}
}
diff --git a/keyboards/ibm/model_m/mschwingen/post_rules.mk b/keyboards/ibm/model_m/mschwingen/post_rules.mk
index a1c2040f4c..025068e057 100644
--- a/keyboards/ibm/model_m/mschwingen/post_rules.mk
+++ b/keyboards/ibm/model_m/mschwingen/post_rules.mk
@@ -1,3 +1,5 @@
+UART_DEBUG ?= no
+
ifeq ($(strip $(UART_DEBUG)), yes)
OPT_DEFS += -DUART_DEBUG
endif
diff --git a/keyboards/ibm/model_m/mschwingen/rules.mk b/keyboards/ibm/model_m/mschwingen/rules.mk
index 7d81ffe326..65761bcf9a 100644
--- a/keyboards/ibm/model_m/mschwingen/rules.mk
+++ b/keyboards/ibm/model_m/mschwingen/rules.mk
@@ -1,29 +1,9 @@
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = no # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
-AUDIO_ENABLE = no # Audio output
-
CUSTOM_MATRIX = lite
-KEY_LOCK_ENABLE = yes
-
-DYNAMIC_MACRO_ENABLE = yes
-
-UART_DEBUG = no
SRC += matrix.c
UART_DRIVER_REQUIRED = yes
SPI_DRIVER_REQUIRED = yes
-OPT_DEFS += -DSLEEP_LED_ENABLE # we need our own sleep callbacks to turn of WS2812 LEDs
-
-LTO_ENABLE = yes
+OPT_DEFS += -DSLEEP_LED_ENABLE
DEFAULT_FOLDER = ibm/model_m/mschwingen/led_wired
diff --git a/keyboards/ibm/model_m/teensy2/info.json b/keyboards/ibm/model_m/teensy2/keyboard.json
index 19603adb7a..173f9e772f 100644
--- a/keyboards/ibm/model_m/teensy2/info.json
+++ b/keyboards/ibm/model_m/teensy2/keyboard.json
@@ -8,6 +8,14 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "features": {
+ "bootmagic": true,
+ "command": false,
+ "console": false,
+ "extrakey": true,
+ "mousekey": false,
+ "nkro": false
+ },
"matrix_pins": {
"cols": ["F0", "F1", "F4", "F5", "F6", "F7", "B6", "B5", "B4", "D7", "D6", "B0", "B1", "B2", "B3", "B7"],
"rows": ["D0", "D1", "D2", "D3", "C6", "C7", "D5", "D4"]
diff --git a/keyboards/ibm/model_m/teensy2/rules.mk b/keyboards/ibm/model_m/teensy2/rules.mk
deleted file mode 100644
index 6fe874e748..0000000000
--- a/keyboards/ibm/model_m/teensy2/rules.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
-AUDIO_ENABLE = no # Audio output
diff --git a/keyboards/ibm/model_m/teensypp/info.json b/keyboards/ibm/model_m/teensypp/keyboard.json
index dcbed72aeb..4464a299f6 100644
--- a/keyboards/ibm/model_m/teensypp/info.json
+++ b/keyboards/ibm/model_m/teensypp/keyboard.json
@@ -15,6 +15,11 @@
"diode_direction": "ROW2COL",
"processor": "at90usb1286",
"bootloader": "halfkay",
+ "features": {
+ "bootmagic": false,
+ "mousekey": false,
+ "extrakey": false
+ },
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/ibm/model_m/teensypp/rules.mk b/keyboards/ibm/model_m/teensypp/rules.mk
deleted file mode 100644
index 1eeda920b4..0000000000
--- a/keyboards/ibm/model_m/teensypp/rules.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no # Mouse keys
-EXTRAKEY_ENABLE = no # Audio control and System control
-CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
-AUDIO_ENABLE = no # Audio output
diff --git a/keyboards/ibm/model_m/teensypp/teensypp.c b/keyboards/ibm/model_m/teensypp/teensypp.c
index fa8669dc81..aac85424bf 100644
--- a/keyboards/ibm/model_m/teensypp/teensypp.c
+++ b/keyboards/ibm/model_m/teensypp/teensypp.c
@@ -17,20 +17,20 @@
void led_init_ports(void) {
/* Setting status LEDs pins to output and +5V (off) */
- setPinOutput(B4);
- setPinOutput(B5);
- setPinOutput(B6);
- writePinHigh(B4);
- writePinHigh(B5);
- writePinHigh(B6);
+ gpio_set_pin_output(B4);
+ gpio_set_pin_output(B5);
+ gpio_set_pin_output(B6);
+ gpio_write_pin_high(B4);
+ gpio_write_pin_high(B5);
+ gpio_write_pin_high(B6);
}
bool led_update_kb(led_t led_state) {
bool res = led_update_user(led_state);
if(res) {
- writePin(B4, !led_state.num_lock);
- writePin(B6, !led_state.caps_lock);
- writePin(B5, !led_state.scroll_lock);
+ gpio_write_pin(B4, !led_state.num_lock);
+ gpio_write_pin(B6, !led_state.caps_lock);
+ gpio_write_pin(B5, !led_state.scroll_lock);
}
return res;
}
diff --git a/keyboards/ibm/model_m/yugo_m/info.json b/keyboards/ibm/model_m/yugo_m/keyboard.json
index f4d9cc1d94..968c637b78 100644
--- a/keyboards/ibm/model_m/yugo_m/info.json
+++ b/keyboards/ibm/model_m/yugo_m/keyboard.json
@@ -8,6 +8,14 @@
"pid": "0x8E81",
"device_version": "0.0.1"
},
+ "features": {
+ "bootmagic": true,
+ "command": false,
+ "console": false,
+ "extrakey": true,
+ "mousekey": true,
+ "nkro": false
+ },
"matrix_pins": {
"cols": ["A9", "A8", "B15", "B14", "B13", "B12", "B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3"],
"rows": ["B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"]
diff --git a/keyboards/ibm/model_m/yugo_m/rules.mk b/keyboards/ibm/model_m/yugo_m/rules.mk
deleted file mode 100644
index ab2c49da70..0000000000
--- a/keyboards/ibm/model_m/yugo_m/rules.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
-AUDIO_ENABLE = no # Audio output
diff --git a/keyboards/ibm/model_m/yugo_m/yugo_m.c b/keyboards/ibm/model_m/yugo_m/yugo_m.c
index 542043d5dc..a725a3657b 100644
--- a/keyboards/ibm/model_m/yugo_m/yugo_m.c
+++ b/keyboards/ibm/model_m/yugo_m/yugo_m.c
@@ -17,9 +17,9 @@
void keyboard_pre_init_kb(void) {
// Set our LED pins as output
- setPinOutput(A2);
- setPinOutput(A1);
- setPinOutput(A0);
+ gpio_set_pin_output(A2);
+ gpio_set_pin_output(A1);
+ gpio_set_pin_output(A0);
keyboard_pre_init_user();
}
@@ -27,9 +27,9 @@ void keyboard_pre_init_kb(void) {
bool led_update_kb(led_t led_state) {
bool res = led_update_user(led_state);
if(res) {
- writePin(A2, !led_state.num_lock);
- writePin(A1, !led_state.caps_lock);
- writePin(A0, !led_state.scroll_lock);
+ gpio_write_pin(A2, !led_state.num_lock);
+ gpio_write_pin(A1, !led_state.caps_lock);
+ gpio_write_pin(A0, !led_state.scroll_lock);
}
return res;
}