diff options
Diffstat (limited to 'keyboards/keychron/q11/ansi_encoder/ansi_encoder.c')
-rwxr-xr-x | keyboards/keychron/q11/ansi_encoder/ansi_encoder.c | 116 |
1 files changed, 0 insertions, 116 deletions
diff --git a/keyboards/keychron/q11/ansi_encoder/ansi_encoder.c b/keyboards/keychron/q11/ansi_encoder/ansi_encoder.c index 0d4fd2cd98..0585ae9c96 100755 --- a/keyboards/keychron/q11/ansi_encoder/ansi_encoder.c +++ b/keyboards/keychron/q11/ansi_encoder/ansi_encoder.c @@ -17,9 +17,6 @@ #include "quantum.h" #ifdef RGB_MATRIX_ENABLE - -// clang-format off - const ckled2001_led PROGMEM g_ckled2001_leds[RGB_MATRIX_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver @@ -128,117 +125,4 @@ const ckled2001_led PROGMEM g_ckled2001_leds[RGB_MATRIX_LED_COUNT] = { {0, G_1, I_1, H_1}, // Down {0, G_7, I_7, H_7}, // Right }; - -#define __ NO_LED - -led_config_t g_led_config = { - { - // Key Matrix to LED Index - { __, 0, 1, 2, 3, 4, 5, 6, __ }, - { 7, 8, 9, 10, 11, 12, 13, 14, __ }, - { 15, 16, 17, 18, 19, __, 20, 21, __ }, - { 22, 23, 24, 25, 26, 27, 28, __, __ }, - { 29, __, 30, 31, 32, 33, 34, 35, __ }, - { 36, 37, 38, 39, 40, __, 41, __, __ }, - { 42, 43, 44, 45, 46, 47, 48, 49, __ }, - { 50, 51, 52, 53, 54, 55, 56, __, 57 }, - { 58, 59, 60, 61, 62, 63, 64, 65, 66 }, - { 67, 68, 69, 70, 71, 72, __, 73, 74 }, - { 75, 76, 77, 78, 79, 80, __, 81, __ }, - { __, 82, 83, 84, 85, __, 86, 87, 88 }, - }, - { - // LED Index to Physical Position - {17,0}, {31,0}, {45,0}, {59,0}, {72,0}, {86,0}, {100,0}, - {0,15}, {17,15}, {31,15}, {45,15}, {59,15}, {72,15}, {86,15}, {100,15}, - {0,27}, {21,27}, {38,27}, {52,27}, {66,27}, {79,27}, {93,27}, - {0,40}, {22,40}, {41,40}, {55,40}, {69,40}, {83,40}, {97,40}, - {0,52}, {26,52}, {48,52}, {61,52}, {76,52}, {90,52}, {102,52}, - {0,64}, {19,64}, {36,64}, {53,64}, {70,64}, {94,64}, - {110,0}, {124,0}, {138,0}, {152,0}, {165,0}, {179,0}, {193,0}, {207,0}, - {110,15}, {124,15}, {138,15}, {152,15}, {165,15}, {179,15}, {200,15}, {224,15}, - {104,27}, {117,27}, {131,27}, {145,27}, {158,27}, {172,27}, {186,27}, {203,27}, {224,27}, - {107,40}, {121,40}, {134,40}, {148,40}, {162,40}, {176,40}, {198,40}, {224,40}, - {114,52}, {127,52}, {141,52}, {155,52}, {169,52}, {188,52}, {210,52}, - {126,64}, {152,64}, {166,64}, {180,64}, {196,64}, {210,64}, {224,64}, - }, - { - // RGB LED Index to Flag - 1, 1, 1, 1, 1, 1, 1, - 1, 1, 4, 4, 4, 4, 4, 4, - 1, 1, 4, 4, 4, 4, 4, - 1, 8, 4, 4, 4, 4, 4, - 1, 1, 4, 4, 4, 4, 4, - 1, 1, 1, 1, 1, 4, - 1, 1, 1, 1, 1, 1, 1, 1, - 4, 4, 4, 4, 4, 4, 1, 1, - 4, 4, 4, 4, 4, 4, 4, 4, 1, - 4, 4, 4, 4, 4, 4, 1, 1, - 4, 4, 4, 4, 4, 1, 1, - 4, 1, 1, 1, 1, 1, 1, - } -}; - -// clang-format on - #endif - -#define ADC_BUFFER_DEPTH 1 -#define ADC_NUM_CHANNELS 1 -#define ADC_SAMPLING_RATE ADC_SMPR_SMP_12P5 -#define ADC_RESOLUTION ADC_CFGR_RES_10BITS - -static int16_t analogReadPin_my(pin_t pin) { - ADCConfig adcCfg = {}; - adcsample_t sampleBuffer[ADC_NUM_CHANNELS*ADC_BUFFER_DEPTH]; - ADCDriver* targetDriver = &ADCD1; - ADCConversionGroup adcConversionGroup = { - .circular = FALSE, - .num_channels = (uint16_t)(ADC_NUM_CHANNELS), - .cfgr = ADC_RESOLUTION, - }; - - palSetLineMode(pin, PAL_MODE_INPUT_ANALOG); - switch (pin) { - case B0: - adcConversionGroup.smpr[2] = ADC_SMPR2_SMP_AN15(ADC_SAMPLING_RATE); - adcConversionGroup.sqr[0] = ADC_SQR1_SQ1_N(ADC_CHANNEL_IN15); - sampleBuffer[0] = 0; - break; - case B1: - adcConversionGroup.smpr[2] = ADC_SMPR2_SMP_AN16(ADC_SAMPLING_RATE); - adcConversionGroup.sqr[0] = ADC_SQR1_SQ1_N(ADC_CHANNEL_IN16); - sampleBuffer[0] = 0; - break; - default: - return 0; - } - adcStart(targetDriver, &adcCfg); - if (adcConvert(targetDriver, &adcConversionGroup, &sampleBuffer[0], ADC_BUFFER_DEPTH) != MSG_OK) { - return 0; - } - - return *sampleBuffer; -} - -void keyboard_post_init_kb(void) { - // 1. The pin A5/B5 of the USB C interface in the left hand is connected to the pin A0 of MCU, - // A0 will be set to output and write high when keyboard initial. - // 2. The same pin in the right hand is connected to the pin B0 and B1 of MCU respectively, - // and the ADC function of B0 and B1 will be enabled when keyboard initial. - // 3. because the serial usart RXD and TXD is multiplexed on USB's D+ and D- in the right hand. - // So detect the voltage on the pin A5/B5 of the USB C interface by ADC, - // and disable USB connectivity when the ADC value exceeds 1000, - // to avoid affecting the serial usart communication between the left hand and the right hand. - if (is_keyboard_left()) { - setPinOutput(A0); - writePinHigh(A0); - } else { - if ((analogReadPin_my(B0) > 1000) || (analogReadPin_my(B1) > 1000)) { - setPinInput(A11); - setPinInput(A12); - } - } - - keyboard_post_init_user(); -} |