diff options
Diffstat (limited to 'keyboards/polilla/mcuconf.h')
| -rw-r--r-- | keyboards/polilla/mcuconf.h | 195 | 
1 files changed, 18 insertions, 177 deletions
| diff --git a/keyboards/polilla/mcuconf.h b/keyboards/polilla/mcuconf.h index 924ccb9e07..15a04a01e5 100644 --- a/keyboards/polilla/mcuconf.h +++ b/keyboards/polilla/mcuconf.h @@ -1,187 +1,28 @@ -/* -    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio -    Licensed under the Apache License, Version 2.0 (the "License"); -    you may not use this file except in compliance with the License. -    You may obtain a copy of the License at -        http://www.apache.org/licenses/LICENSE-2.0 -    Unless required by applicable law or agreed to in writing, software -    distributed under the License is distributed on an "AS IS" BASIS, -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -    See the License for the specific language governing permissions and -    limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK   * - * IRQ priorities: - * 3...0       Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version.   * - * DMA priorities: - * 0...3        Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT                       FALSE -#define STM32_PVD_ENABLE                    FALSE -#define STM32_PLS                           STM32_PLS_LEV0 -#define STM32_HSI_ENABLED                   TRUE -#define STM32_HSI14_ENABLED                 TRUE -#define STM32_HSI48_ENABLED                 FALSE -#define STM32_LSI_ENABLED                   TRUE -#define STM32_HSE_ENABLED                   FALSE -#define STM32_LSE_ENABLED                   FALSE -#define STM32_SW                            STM32_SW_PLL -#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE                  1 -#define STM32_PLLMUL_VALUE                  12 -#define STM32_HPRE                          STM32_HPRE_DIV1 -#define STM32_PPRE                          STM32_PPRE_DIV1 -#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE                        STM32_MCOPRE_DIV1 -#define STM32_PLLNODIV                      STM32_PLLNODIV_DIV2 -#define STM32_USBSW                         STM32_USBSW_HSI48 -#define STM32_CECSW                         STM32_CECSW_HSI -#define STM32_I2C1SW                        STM32_I2C1SW_HSI -#define STM32_USART1SW                      STM32_USART1SW_PCLK -#define STM32_RTCSEL                        STM32_RTCSEL_LSI - -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_1_IRQ_PRIORITY      3 -#define STM32_IRQ_EXTI2_3_IRQ_PRIORITY      3 -#define STM32_IRQ_EXTI4_15_IRQ_PRIORITY     3 -#define STM32_IRQ_EXTI16_IRQ_PRIORITY       3 -#define STM32_IRQ_EXTI17_20_IRQ_PRIORITY    3 -#define STM32_IRQ_EXTI21_22_IRQ_PRIORITY    3 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1                  FALSE -#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK -#define STM32_ADC_ADC1_DMA_PRIORITY         2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2 -#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1) - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1                  FALSE -#define STM32_GPT_USE_TIM2                  FALSE -#define STM32_GPT_USE_TIM3                  FALSE -#define STM32_GPT_USE_TIM14                 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY         2 -#define STM32_GPT_TIM2_IRQ_PRIORITY         2 -#define STM32_GPT_TIM3_IRQ_PRIORITY         2 -#define STM32_GPT_TIM14_IRQ_PRIORITY        2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1                  FALSE -#define STM32_I2C_BUSY_TIMEOUT              50 -#define STM32_I2C_I2C1_IRQ_PRIORITY         3 -#define STM32_I2C_USE_DMA                   TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY         1 -#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI1                  FALSE -#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \ -                                             STM32_I2S_MODE_RX) -#define STM32_I2S_SPI1_IRQ_PRIORITY         2 -#define STM32_I2S_SPI1_DMA_PRIORITY         1 -#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1                  FALSE -#define STM32_ICU_USE_TIM2                  FALSE -#define STM32_ICU_USE_TIM3                  FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY         3 -#define STM32_ICU_TIM2_IRQ_PRIORITY         3 -#define STM32_ICU_TIM3_IRQ_PRIORITY         3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED              FALSE -#define STM32_PWM_USE_TIM1                  FALSE -#define STM32_PWM_USE_TIM2                  FALSE -#define STM32_PWM_USE_TIM3                  FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY         3 -#define STM32_PWM_TIM2_IRQ_PRIORITY         3 -#define STM32_PWM_TIM3_IRQ_PRIORITY         3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1             FALSE -#define STM32_SERIAL_USE_USART2             TRUE -#define STM32_SERIAL_USART1_PRIORITY        3 -#define STM32_SERIAL_USART2_PRIORITY        3 - -/* - * SPI driver system settings. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program.  If not, see <http://www.gnu.org/licenses/>.   */ -#define STM32_SPI_USE_SPI1                  FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY         1 -#define STM32_SPI_SPI1_IRQ_PRIORITY         2 -#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2) -#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")  /* - * ST driver system settings. + * This file was auto-generated by: + *    `qmk chibios-confupdate -i keyboards/polilla/mcuconf.h -r platforms/chibios/GENERIC_STM32_F042X6/configs/mcuconf.h`   */ -#define STM32_ST_IRQ_PRIORITY               2 -#define STM32_ST_USE_TIMER                  2 -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1               FALSE -#define STM32_UART_USE_USART2               FALSE -#define STM32_UART_USART1_IRQ_PRIORITY      3 -#define STM32_UART_USART2_IRQ_PRIORITY      3 -#define STM32_UART_USART1_DMA_PRIORITY      0 -#define STM32_UART_USART2_DMA_PRIORITY      0 -#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure") +#pragma once -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG                  FALSE +#include_next <mcuconf.h> -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1                  TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY      3 +#undef STM32_SERIAL_USE_USART2 +#define STM32_SERIAL_USE_USART2 TRUE -#endif /* MCUCONF_H */ | 
