diff options
Diffstat (limited to 'keyboards/ymdk/id75/readme.md')
-rw-r--r-- | keyboards/ymdk/id75/readme.md | 16 |
1 files changed, 11 insertions, 5 deletions
diff --git a/keyboards/ymdk/id75/readme.md b/keyboards/ymdk/id75/readme.md index 9315745f71..f94d4c14cf 100644 --- a/keyboards/ymdk/id75/readme.md +++ b/keyboards/ymdk/id75/readme.md @@ -5,17 +5,21 @@ A 75-key, 5-row ortholinear keyboard with per-key and underglow RGB LEDs. * Keyboard Maintainer: [The QMK Community](https://github.com/qmk) -* Hardware Supported: [Idobao x YMDK ID75 PCB (APM32F103CBT6)](https://www.aliexpress.com/item/3256804537842097.html) - * This PCB uses an ARM Cortex-M3 MCU with 128kb flash. **It is not the same as `idobao/id75` or `ymdk/ymd75`.** +* Hardware Supported: [Idobao x YMDK ID75](https://www.aliexpress.com/item/3256804537842097.html). **This is not the same PCB as `idobao/id75` or `ymdk/ymd75`.** + This keyboard has had multiple PCB revisions, some of which may not work with the firmware in this repository. **Check your PCB before flashing.** + * `f103`: (Geehy APM32F103CBT6, uf2boot) + * `rp2040`: (RP2040, rp2040) * Hardware Availability: [YMDK](https://ymdkey.com/products/id75-75-keys-ortholinear-layout-qmk-anodized-aluminum-case-plate-hot-swappable-hot-swap-type-c-pcb-mechanical-keyboard-kit), [AliExpress (YMDK Store)](https://www.aliexpress.com/item/2255800125183974.html), [Amazon](https://www.amazon.com/Ortholinear-Anodized-Aluminum-hot-swappable-Mechanical/dp/B07ZQ8CD88) Make example for this keyboard (after setting up your build environment): - make ymdk/id75:default + make ymdk/id75/f103:default + make ymdk/id75/rp2040:default Flashing example for this keyboard: - make ymdk/id75:default:flash + make ymdk/id75/f103:default:flash + make ymdk/id75/rp2040:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). @@ -27,4 +31,6 @@ Enter the bootloader in 3 ways: * **Physical reset button**: Press the button on the back of the PCB twice in quick succession. * **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the pre-supplied keymaps it is on the second layer, in the bottom-right corner. -After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `MT.KEY`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded. +After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded. +- `f103`: The volume name is `MT.KEY`. +- `rp2040`: The volume name is `RPI-RP2`. |