diff options
Diffstat (limited to 'lib/usbhost/USB_Host_Shield_2.0/PSBuzz.cpp')
| -rw-r--r-- | lib/usbhost/USB_Host_Shield_2.0/PSBuzz.cpp | 82 | 
1 files changed, 82 insertions, 0 deletions
| diff --git a/lib/usbhost/USB_Host_Shield_2.0/PSBuzz.cpp b/lib/usbhost/USB_Host_Shield_2.0/PSBuzz.cpp new file mode 100644 index 0000000000..498164d5a6 --- /dev/null +++ b/lib/usbhost/USB_Host_Shield_2.0/PSBuzz.cpp @@ -0,0 +1,82 @@ +/* Copyright (C) 2014 Kristian Lauszus, TKJ Electronics. All rights reserved. + + This software may be distributed and modified under the terms of the GNU + General Public License version 2 (GPL2) as published by the Free Software + Foundation and appearing in the file GPL2.TXT included in the packaging of + this file. Please note that GPL2 Section 2[b] requires that all works based + on this software must also be made publicly available under the terms of + the GPL2 ("Copyleft"). + + Contact information + ------------------- + + Kristian Lauszus, TKJ Electronics + Web      :  http://www.tkjelectronics.com + e-mail   :  [email protected] + */ + +#include "PSBuzz.h" + +// To enable serial debugging see "settings.h" +//#define PRINTREPORT // Uncomment to print the report send by the PS Buzz Controllers + +void PSBuzz::ParseHIDData(HID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf) { +        if (HIDUniversal::VID == PSBUZZ_VID && HIDUniversal::PID == PSBUZZ_PID && len > 2 && buf) { +#ifdef PRINTREPORT +                Notify(PSTR("\r\n"), 0x80); +                for (uint8_t i = 0; i < len; i++) { +                        D_PrintHex<uint8_t > (buf[i], 0x80); +                        Notify(PSTR(" "), 0x80); +                } +#endif +                memcpy(&psbuzzButtons, buf + 2, min((uint8_t)(len - 2), sizeof(psbuzzButtons))); + +                if (psbuzzButtons.val != oldButtonState.val) { // Check if anything has changed +                        buttonClickState.val = psbuzzButtons.val & ~oldButtonState.val; // Update click state variable +                        oldButtonState.val = psbuzzButtons.val; +                } +        } +}; + +uint8_t PSBuzz::OnInitSuccessful() { +        if (HIDUniversal::VID == PSBUZZ_VID && HIDUniversal::PID == PSBUZZ_PID) { +                Reset(); +                if (pFuncOnInit) +                        pFuncOnInit(); // Call the user function +                else +                        setLedOnAll(); // Turn the LED on, on all four controllers +        }; +        return 0; +}; + +bool PSBuzz::getButtonPress(ButtonEnum b, uint8_t controller) { +        return psbuzzButtons.val & (1UL << (b + 5 * controller)); // Each controller uses 5 bits, so the value is shifted 5 for each controller +}; + +bool PSBuzz::getButtonClick(ButtonEnum b, uint8_t controller) { +        uint32_t mask = (1UL << (b + 5 * controller)); // Each controller uses 5 bits, so the value is shifted 5 for each controller +        bool click = buttonClickState.val & mask; +        buttonClickState.val &= ~mask; // Clear "click" event +        return click; +}; + +// Source: http://www.developerfusion.com/article/84338/making-usb-c-friendly/ and https://github.com/torvalds/linux/blob/master/drivers/hid/hid-sony.c +void PSBuzz::setLedRaw(bool value, uint8_t controller) { +        ledState[controller] = value; // Save value for next time it is called + +        uint8_t buf[7]; +        buf[0] = 0x00; +        buf[1] = ledState[0] ? 0xFF : 0x00; +        buf[2] = ledState[1] ? 0xFF : 0x00; +        buf[3] = ledState[2] ? 0xFF : 0x00; +        buf[4] = ledState[3] ? 0xFF : 0x00; +        buf[5] = 0x00; +        buf[6] = 0x00; + +        PSBuzz_Command(buf, sizeof(buf)); +}; + +void PSBuzz::PSBuzz_Command(uint8_t *data, uint16_t nbytes) { +        // bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0x00), Report Type (Output 0x02), interface (0x00), datalength, datalength, data) +        pUsb->ctrlReq(bAddress, epInfo[0].epAddr, bmREQ_HID_OUT, HID_REQUEST_SET_REPORT, 0x00, 0x02, 0x00, nbytes, nbytes, data, NULL); +}; | 
