From 3d7428a33303b6e3ba55c043c31c38af926e7c5a Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Sat, 7 Jul 2018 11:47:24 -0700 Subject: COD67 "Support" (#3332) * preliminary Gray COD67 checkin * Get part of the switch matrix prepped * finish switch matrix * mock the pins and keymap for now * add keymap fixes * update readme with flashing instructions * keymap fix * Add more flashing and notes info to readme * remove un needed file * fix comments * add QMK Configurator Support --- keyboards/cod67/readme.md | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 keyboards/cod67/readme.md (limited to 'keyboards/cod67/readme.md') diff --git a/keyboards/cod67/readme.md b/keyboards/cod67/readme.md new file mode 100644 index 0000000000..9471a2034e --- /dev/null +++ b/keyboards/cod67/readme.md @@ -0,0 +1,32 @@ +# Gray COD67 + +![cod67](imgur.com image replace me!) + +The Gray COD67 is a 60% keyboard with a modern and bold design. It features 20 RGB Underglow LED lights and a unique diffuser placement. The COD67 has the most stunning RGB light strip for a custom mechanical keyboard. It also features a center mounted USB C port. + +There were only 75 units made worldwide. + +Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +Hardware Supported: Gray COD67 +Hardware Availability: [Zfrontier](https://en.zfrontier.com/products/cod67) + +At this time, flashing ONLY works on Windows systems. + +To put in bootloader mode, hold the `Esc` key while plugging in the USB cable. + +The COD67 will show up as a drive. + +Make example for this keyboard (after setting up your build environment): + + make cod67:default:bin + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +Rename the resulting `.bin` file to `cod67.bin`. + +Drag and drop `cod67.bin` to the drive, overwriting the previous `cod67.bin` stored on it. + +Press the `Esc` key again to reset the board. You are now ready to type! + +## Notes +The backlight pin is attached to a non PWM pin `D4` so backlight is only on/off. -- cgit v1.2.3