From 0694decfa1254703690cd11ee5996e8a1a09b8a1 Mon Sep 17 00:00:00 2001 From: William Chang Date: Sat, 13 Jul 2019 13:12:37 -0700 Subject: [Keymap] switch backspace and backslash, updated readme (#6323) --- keyboards/dz60/keymaps/billiams/keymap.c | 8 ++++---- keyboards/dz60/keymaps/billiams/readme.md | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/keymaps/billiams/keymap.c b/keyboards/dz60/keymaps/billiams/keymap.c index b1c75d9036..b59040d772 100644 --- a/keyboards/dz60/keymaps/billiams/keymap.c +++ b/keyboards/dz60/keymaps/billiams/keymap.c @@ -4,9 +4,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Qwerty * ,-----------------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | * |-----------------------------------------------------------------------------------------+ - * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bkspc | * |-----------------------------------------------------------------------------------------+ * | Fn | A | S | D | F | G | H | J | K | L | ; | ' | Enter | * |-----------------------------------------------------------------------------------------+ @@ -17,8 +17,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ LAYOUT_directional( - KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, KC_BSLS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, _______, RSFT_T(KC_SLSH) , KC_UP, KC_ESCAPE, KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT diff --git a/keyboards/dz60/keymaps/billiams/readme.md b/keyboards/dz60/keymaps/billiams/readme.md index 5c0431e238..0f917bf415 100644 --- a/keyboards/dz60/keymaps/billiams/readme.md +++ b/keyboards/dz60/keymaps/billiams/readme.md @@ -12,6 +12,7 @@ Settings: * RESET is available as `Fn`+ ` ESC` * Underglow toggle is available as `Fn` + `Q`. Yes your keyboard has lights even if you didn't get the LEDs. Bonus! * vim-style arrow key bindings H J K L in layer 1 +* The `Bkspc` and `\` keys have been swapped, the reach was too great to have backspace on the top row ### Initial Installation @@ -35,16 +36,16 @@ A hex file `dz60_billiams.hex` will be created in the base qmk_firmware director 5. Holding those keys down, plug the keyboard into your computer, which will put the keyboard in bootlegger mode 6. If you are using [QMK toolbox](https://github.com/qmk/qmk_toolbox/releases), upload the .hex file you made above, select it and hit the flash button. For the love of all that is good and holy on Earth, don't hit the load button, that will load the default keymap and that's not what you want! Unless it is, in which case click away. -Note: If you didn't follow my instructions in 4 and accidentally loaded the default keymap, then to `RESET` the keyboard and kick it into bootleg mode again, hold the `down arrow` key and `\`. The default layout is Build 1 and sets the `MENU` key on that build to `Fn`. `MENU` corresponds to `down arrow` in build 4. Note that you don't have to unplug the keyboard. +Note: If you didn't follow my instructions in 4 and accidentally loaded the default keymap, then to `RESET` the keyboard and kick it into bootleg mode again, hold the `down arrow` key and `\`. The default layout is Build 1 and sets the `MENU` key on that build to `Fn`. `MENU` corresponds to `down arrow` in build 4. Note that you don't have to unplug the keyboard. Hope this helps! ### 0 Qwerty ``` ,-----------------------------------------------------------------------------------------. -| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | +| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | |-----------------------------------------------------------------------------------------+ -| Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | +| Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bkspc | |-----------------------------------------------------------------------------------------+ | Fn | A | S | D | F | G | H | J | K | L | ; | ' | Enter | |-----------------------------------------------------------------------------------------+ @@ -69,4 +70,3 @@ FN Layer | | | | | | | HOME | PG_DN | END | `-----------------------------------------------------------------------------------------' ``` - -- cgit v1.2.3 From 554e4bf25c4bcbf263b2e73c6148b7ea1d520762 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Wed, 10 Jul 2019 08:47:35 +1000 Subject: Migrate ACTION_LAYER_MOMENTARYs to MO() (#5176) * Migrate ACTION_LAYER_MOMENTARYs to MO() * Add changelog entry * Update docs/ChangeLog/20190830/PR5176.md Co-Authored-By: skullydazed --- docs/ChangeLog/20190830/PR5176.md | 4 ++++ keyboards/atomic/keymaps/abienz.c | 9 ++------- keyboards/atomic/keymaps/twolayer.c | 5 ----- keyboards/atreus/keymaps/erlandsona/keymap.c | 3 +-- keyboards/atreus62/keymaps/atreus52/keymap.c | 9 +++++---- .../bpiphany/frosty_flake/keymaps/QFR_JM/keymap.c | 4 +--- .../bpiphany/pegasushoof/keymaps/blowrak/keymap.c | 5 ++--- keyboards/dz60/keymaps/LEdiodes/keymap.c | 5 ----- keyboards/gh60/revc/keymaps/maxr1998/keymap.c | 8 ++------ keyboards/gh60/revc/keymaps/robotmaxtron/keymap.c | 3 +-- keyboards/gh60/revc/keymaps/sethbc/keymap.c | 3 +-- keyboards/hhkb/keymaps/shela/keymap.c | 11 +++++------ keyboards/jd45/keymaps/justin/keymap.c | 9 +++++---- keyboards/keebio/nyquist/keymaps/DivergeJM/keymap.c | 6 ++---- keyboards/org60/keymaps/boardy/keymap.c | 13 +++---------- keyboards/planck/keymaps/angerthosenear/keymap.c | 11 ++++------- keyboards/planck/keymaps/austin/keymap.c | 13 +++++-------- keyboards/planck/keymaps/charlie/keymap.c | 5 ++--- keyboards/planck/keymaps/daniel/keymap.c | 15 ++++----------- keyboards/planck/keymaps/david/keymap.c | 11 ++++------- keyboards/planck/keymaps/dzobert/keymap.c | 11 ++++------- keyboards/planck/keymaps/joe/keymap.c | 17 +++++++---------- keyboards/planck/keymaps/kyle/keymap.c | 11 ++++------- keyboards/planck/keymaps/leo/keymap.c | 9 +-------- keyboards/planck/keymaps/lucas/keymap.c | 6 ++---- keyboards/planck/keymaps/max/keymap.c | 13 +++++-------- .../old_keymap_files/common_keymaps/keymap_brett.c | 12 ++++++------ .../old_keymap_files/common_keymaps/keymap_dotcom.c | 8 ++++---- .../old_keymap_files/common_keymaps/keymap_jack.c | 14 +++++++------- .../old_keymap_files/common_keymaps/keymap_joe.c | 16 ++++++++-------- .../old_keymap_files/common_keymaps/keymap_matthew.c | 8 ++++---- .../old_keymap_files/common_keymaps/keymap_nathan.c | 7 ++++--- .../old_keymap_files/common_keymaps/keymap_paul.c | 18 +++++++++--------- .../old_keymap_files/common_keymaps/keymap_reed.c | 14 +++++++------- .../old_keymap_files/common_keymaps/keymap_sean.c | 13 +++++++------ .../old_keymap_files/common_keymaps/keymap_shane.c | 9 +++++---- .../old_keymap_files/common_keymaps/keymap_simon.c | 8 ++++---- .../old_keymap_files/common_keymaps/keymap_tim.c | 12 ++++++------ .../old_keymap_files/common_keymaps/keymap_wilba.c | 14 +++++++------- keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c | 4 +--- keyboards/sentraq/s60_x/keymaps/hasu/keymap.c | 17 +++++++++-------- keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c | 11 +++-------- keyboards/sentraq/s60_x/keymaps/jpec/keymap.c | 5 +++-- keyboards/sentraq/s60_x/keymaps/poker/keymap.c | 15 ++++++++------- keyboards/sentraq/s65_x/keymaps/kelorean/keymap.c | 1 - keyboards/sentraq/s65_x/keymaps/nall/keymap.c | 1 - keyboards/whitefox/keymaps/kim-kim/keymap.c | 4 +--- keyboards/whitefox/keymaps/matt3o/keymap.c | 6 ++---- keyboards/winkeyless/bface/keymaps/kpeatt/keymap.c | 4 ---- keyboards/xd60/keymaps/Jos/keymap.c | 4 +--- keyboards/xd60/keymaps/birkir/keymap.c | 11 +++-------- keyboards/xd60/keymaps/edulpn/keymap.c | 9 ++------- keyboards/xd60/keymaps/edulpn64/keymap.c | 9 ++------- keyboards/xd60/keymaps/kmontag42/keymap.c | 9 ++------- keyboards/xd60/keymaps/krusli/keymap.c | 5 ----- keyboards/xd60/keymaps/split_bksp_arrows/keymap.c | 17 +++++++++++++---- keyboards/xd60/keymaps/stanleylai/keymap.c | 14 ++++---------- keyboards/xd60/keymaps/supercoffee/keymap.c | 9 ++------- layouts/community/60_iso/unxmaal/keymap.c | 1 - layouts/community/ergodox/guni/keymap.c | 1 - layouts/community/ergodox/ishigoya-jp/keymap.c | 8 ++------ .../osx_whiskey_tango_foxtrot_capslock/keymap.c | 14 ++++++-------- 62 files changed, 218 insertions(+), 333 deletions(-) create mode 100644 docs/ChangeLog/20190830/PR5176.md (limited to 'keyboards/dz60') diff --git a/docs/ChangeLog/20190830/PR5176.md b/docs/ChangeLog/20190830/PR5176.md new file mode 100644 index 0000000000..c01b2cb1e3 --- /dev/null +++ b/docs/ChangeLog/20190830/PR5176.md @@ -0,0 +1,4 @@ +* Migrating `ACTION_LAYER_MOMENTARY()` entries in `fn_actions` to `MO()` keycodes + * `fn_actions` is deprecated, and its functionality has been superseded by direct keycodes and `process_record_user()` + * The end result of removing this obsolete feature should result in a decent reduction in firmware size and code complexity + * All keymaps affected are recommended to switch away from `fn_actions` in favour of the [custom keycode](https://docs.qmk.fm/#/custom_quantum_functions) and [macro](https://docs.qmk.fm/#/feature_macros) features diff --git a/keyboards/atomic/keymaps/abienz.c b/keyboards/atomic/keymaps/abienz.c index 2e69165f24..5bc00aa824 100644 --- a/keyboards/atomic/keymaps/abienz.c +++ b/keyboards/atomic/keymaps/abienz.c @@ -6,22 +6,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, CM_Q, CM_W, CM_F, CM_P, CM_G, CM_J, CM_L, CM_U, CM_Y, CM_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , KC_BSPC, CM_A, CM_R, CM_S, CM_T, CM_D, CM_H, CM_N, CM_E, CM_I, CM_O, KC_QUOT, KC_ENT, KC_NO, KC_PGUP, KC_LSFT, CM_Z, CM_X, CM_C, CM_V, CM_B, CM_K, CM_M, CM_COMM, CM_DOT, CM_SLSH, KC_RSFT, KC_NO, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_NO, KC_LALT, FUNC(1), KC_SPC, KC_NO, KC_RALT, FUNC(2), KC_RGUI, KC_NO, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, + KC_LCTL, KC_LGUI, KC_NO, KC_LALT, MO(1), KC_SPC, KC_NO, KC_RALT, MO(1), KC_RGUI, KC_NO, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, ), [1] = LAYOUT_grid( /* function */ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_NO , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MPLY, - KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, FUNC(1), KC_TRNS, KC_NO, KC_TRNS, FUNC(2), KC_TRNS, KC_NO, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT, + KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, MO(1), KC_TRNS, KC_NO, KC_TRNS, MO(1), KC_TRNS, KC_NO, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT, ), }; -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), - [2] = ACTION_LAYER_MOMENTARY(1), -}; - const macro_t * action_get_macro(keyrecord_t * record, uint8_t id, uint8_t opt) { // MACRODOWN only works in this function switch (id) { diff --git a/keyboards/atomic/keymaps/twolayer.c b/keyboards/atomic/keymaps/twolayer.c index f0ff56467d..9ecbbc6df3 100644 --- a/keyboards/atomic/keymaps/twolayer.c +++ b/keyboards/atomic/keymaps/twolayer.c @@ -45,11 +45,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), - [2] = ACTION_LAYER_MOMENTARY(1), -}; - const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { // MACRODOWN only works in this function switch(id) { diff --git a/keyboards/atreus/keymaps/erlandsona/keymap.c b/keyboards/atreus/keymaps/erlandsona/keymap.c index e890e7f528..e25f4f089d 100644 --- a/keyboards/atreus/keymaps/erlandsona/keymap.c +++ b/keyboards/atreus/keymaps/erlandsona/keymap.c @@ -16,7 +16,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , SFT_T(KC_Z), KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , SFT_T(KC_QUOT), - KC_LCTL , KC_LALT, KC_LALT, KC_LGUI, KC_BSPC, KC_ESC, KC_ENT, KC_SPC, F(NUMS), KC_RALT, KC_SLSH, KC_BSLS + KC_LCTL , KC_LALT, KC_LALT, KC_LGUI, KC_BSPC, KC_ESC, KC_ENT, KC_SPC, MO(NUMS),KC_RALT, KC_SLSH, KC_BSLS ), [NUMS] = LAYOUT( /* Numbers / Arrows / Symbols */ @@ -39,7 +39,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // so that I can get out of mouse mode just by tapping/holding my base layer FN key. const uint16_t PROGMEM fn_actions[] = { [BASE] = ACTION_LAYER_OFF(2, 1), // switch back to layer 0 - [NUMS] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay [MOUS] = ACTION_LAYER_ON(2, 1) // switch to layer 2 }; diff --git a/keyboards/atreus62/keymaps/atreus52/keymap.c b/keyboards/atreus62/keymaps/atreus52/keymap.c index 72bb886534..c7dcb67653 100644 --- a/keyboards/atreus62/keymaps/atreus52/keymap.c +++ b/keyboards/atreus62/keymaps/atreus52/keymap.c @@ -8,13 +8,16 @@ #define BDO 4 #define RESETL 5 +#define KC_RAIS MO(RAISE) +#define KC_LOWR MO(LOWER) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [DVORAK] = LAYOUT_kc( NO, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, NO, \ NO, QUOT, COMM, DOT, P, Y, F, G, C, R, L, NO, \ NO, A, O, E, U, I, D, H, T, N, S, NO, \ NO, SCLN, Q, J, K, X, B, M, W, V, Z, NO, \ - NO, FN2, LALT, LCTL, FN1, LSFT, BSPC, ENT, SPC, FN0, LGUI, LEFT, RGHT, NO + NO, FN2, LALT, LCTL, LOWR, LSFT, BSPC, ENT, SPC, RAIS, LGUI, LEFT, RGHT, NO ), [QWERTY] = LAYOUT_kc( @@ -22,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { NO, Q, W, E, R, T, Y, U, I, O, P, NO, \ NO, A, S, D, F, G, H, J, K, L, SCLN, NO, \ NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, \ - NO, FN2, LALT, LCTL, FN1, LSFT, BSPC, ENT, SPC, FN0, LGUI, LEFT, RGHT, NO + NO, FN2, LALT, LCTL, LOWR, LSFT, BSPC, ENT, SPC, RAIS, LGUI, LEFT, RGHT, NO ), [RAISE] = LAYOUT_kc( @@ -59,8 +62,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(RAISE), // Raise layer - [1] = ACTION_LAYER_MOMENTARY(LOWER), // Lower layer [2] = ACTION_LAYER_TOGGLE(BDO), // BDO layer [3] = ACTION_LAYER_TOGGLE(RESETL) // RESET layer }; diff --git a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/keymap.c b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/keymap.c index f76b7e02c8..d9a81b195a 100644 --- a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/keymap.c +++ b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/keymap.c @@ -23,12 +23,10 @@ enum custom_macros { const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), //Hold for momentary Lower layer, Tap for Space, - [1] = ACTION_LAYER_MOMENTARY(_MOUSE) //Hold for momentary MOUSE - }; #define SPC_LW FUNC(0) -#define MSE FUNC(1) +#define MSE MO(_MOUSE) #define PIPE M(R_PIPE) #define POINT M(R_POINT) diff --git a/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c b/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c index 7db7e5d39e..aad2d643cd 100644 --- a/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c +++ b/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c @@ -48,7 +48,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, SE_AO, SE_AE, SE_OE, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_COMM,SE_CIRC,SE_QUOT, KC_DEL, KC_END, KC_PGDN, \ KC_LCTRL,KC_A, KC_O, KC_E, KC_U, KC_I, KC_H, KC_D, KC_T, KC_N, KC_S, SE_MINS, KC_ENT, \ KC_LSFT, SE_LTGT,KC_DOT, KC_Q, KC_J, KC_K, KC_B, KC_X, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \ - KC_FN0, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN1, KC_LEFT,KC_DOWN,KC_RGHT), + MO(KM_MEDIA),KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN1, KC_LEFT,KC_DOWN,KC_RGHT), /* Layer 1: Standard ISO layer */ [KM_QWERTY] = LAYOUT( \ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ @@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, SE_AO, SE_CIRC,SE_QUOT, KC_DEL, KC_END, KC_PGDN, \ KC_LCTRL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, SE_OE, SE_AE, KC_ENT, \ KC_LSFT, SE_LTGT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, SE_MINS, KC_RSFT, KC_UP, \ - KC_FN0, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN1, KC_LEFT,KC_DOWN,KC_RGHT), + MO(KM_MEDIA),KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN1, KC_LEFT,KC_DOWN,KC_RGHT), /* Layer 2: Media layer */ [KM_MEDIA] = LAYOUT( \ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_WAKE,KC_PWR, KC_SLEP, \ @@ -76,7 +76,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(KM_MEDIA), [1] = ACTION_LAYER_TOGGLE(KM_QWERTY) }; diff --git a/keyboards/dz60/keymaps/LEdiodes/keymap.c b/keyboards/dz60/keymaps/LEdiodes/keymap.c index c6a9214a01..3ac0047a31 100644 --- a/keyboards/dz60/keymaps/LEdiodes/keymap.c +++ b/keyboards/dz60/keymaps/LEdiodes/keymap.c @@ -100,11 +100,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -// Custom Actions -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay -}; - // Macros const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { diff --git a/keyboards/gh60/revc/keymaps/maxr1998/keymap.c b/keyboards/gh60/revc/keymaps/maxr1998/keymap.c index eff94ff657..4a1ad54b41 100644 --- a/keyboards/gh60/revc/keymaps/maxr1998/keymap.c +++ b/keyboards/gh60/revc/keymaps/maxr1998/keymap.c @@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Z, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_NO, \ KC_LOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_HOME, KC_ENT, \ KC_LSFT, KC_BSLS, KC_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT,\ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, F(0), KC_LEFT, KC_DOWN, KC_RGHT), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), /* 1: fn */ LAYOUT( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ @@ -48,10 +48,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1) // to Fn overlay -}; - void matrix_scan_user(void) { } @@ -80,4 +76,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } } return true; -} \ No newline at end of file +} diff --git a/keyboards/gh60/revc/keymaps/robotmaxtron/keymap.c b/keyboards/gh60/revc/keymaps/robotmaxtron/keymap.c index 649cbec389..2f3f10f5c7 100644 --- a/keyboards/gh60/revc/keymaps/robotmaxtron/keymap.c +++ b/keyboards/gh60/revc/keymaps/robotmaxtron/keymap.c @@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, \ F(2),KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT, \ KC_LSFT,KC_NO,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_NO,KC_RSFT, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_NO,KC_RALT,F(0),KC_APP,KC_RCTL), + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_NO,KC_RALT,MO(2),KC_APP,KC_RCTL), /* * Locking arrow keys to WASD for when you need dedicated arrow keys @@ -106,7 +106,6 @@ enum function_id { }; const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay [1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay [2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer [3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay diff --git a/keyboards/gh60/revc/keymaps/sethbc/keymap.c b/keyboards/gh60/revc/keymaps/sethbc/keymap.c index 6c2c00ec27..f2802827a1 100644 --- a/keyboards/gh60/revc/keymaps/sethbc/keymap.c +++ b/keyboards/gh60/revc/keymaps/sethbc/keymap.c @@ -9,7 +9,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { F(0),KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV,\ KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSPC,\ KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_ENT,\ - KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,F(1),\ + KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,MO(1),\ KC_LCTL,KC_LALT,KC_LGUI, KC_SPC, KC_RGUI,KC_RALT,KC_APP,KC_RCTL), /* 1: fn */ LAYOUT_60_ansi_split_bs_rshift( @@ -26,7 +26,6 @@ enum function_id { const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_FUNCTION(SHIFT_ESC), - [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay }; const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) diff --git a/keyboards/hhkb/keymaps/shela/keymap.c b/keyboards/hhkb/keymaps/shela/keymap.c index 5f3881539a..dae85ad9ca 100644 --- a/keyboards/hhkb/keymaps/shela/keymap.c +++ b/keyboards/hhkb/keymaps/shela/keymap.c @@ -35,7 +35,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_FN0, + OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(HHKB), KC_LALT, KC_LGUI, KC_FN2, KC_RGUI, KC_RALT), /* Layer 1: Pseudo US Layout Layer @@ -55,7 +55,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT(KC_ESC, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_BSPC, KC_TAB, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_LCTL, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_ENT, - KC_LSFT, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_RSFT, KC_FN0, + KC_LSFT, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_RSFT, MO(HHKB), KC_LGUI, KC_FN3, KC_FN2, KC_FN4, KC_RGUI), /* Layer 2: Dvorak Layer @@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSPC, KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_FN0, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, MO(HHKB), KC_LALT, KC_LGUI, KC_FN2, KC_RGUI, KC_RALT), /* Layer 3: Mouse layer @@ -95,7 +95,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT(KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_NO, KC_NO, KC_TRNS, - KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN1, KC_BTN2, KC_BTN3, KC_NO, KC_NO, KC_TRNS, KC_FN0, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN1, KC_BTN2, KC_BTN3, KC_NO, KC_NO, KC_TRNS, MO(HHKB), KC_TRNS, KC_TRNS, KC_BTN1, KC_TRNS, KC_TRNS), /* Layer 4: Tenkey layer @@ -115,7 +115,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT(KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSLS, KC_PAST, KC_PMNS, KC_NO, KC_BSPC, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_7, KC_KP_8, KC_KP_9, KC_PPLS, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_4, KC_KP_5, KC_KP_6, KC_PENT, - KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_1, KC_KP_2, KC_KP_3, KC_PPLS, KC_FN0, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_1, KC_KP_2, KC_KP_3, KC_PPLS, MO(HHKB), KC_TRNS, KC_TRNS, KC_FN2, KC_KP_0, KC_PDOT), /* Layer 5: HHKB mode (HHKB Fn) @@ -182,7 +182,6 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) * Fn action definition */ const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(HHKB), [1] = ACTION_FUNCTION(PSEUDO_US_FUNCTION), [2] = ACTION_LAYER_TAP_KEY(SPACE_FN, KC_SPACE), [3] = ACTION_MODS_TAP_KEY(MOD_LALT, KC_MHEN), diff --git a/keyboards/jd45/keymaps/justin/keymap.c b/keyboards/jd45/keymaps/justin/keymap.c index 4590374e9b..91cc760c6a 100644 --- a/keyboards/jd45/keymaps/justin/keymap.c +++ b/keyboards/jd45/keymaps/justin/keymap.c @@ -1,11 +1,15 @@ #include QMK_KEYBOARD_H +#define KC_MO1 MO(1) +#define KC_MO2 MO(2) +#define KC_MO3 MO(3) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_kc( ESC, Q, W, F, P, G, J, L, U, Y, SCLN, QUOT, BSPC, FN8, A, R, S, T, D, H, N, E, I, O, ENT, LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, FN6, - FN4, LGUI, FN7, FN2, FN1, SPC, FN5, RALT, FN3, FN0), + FN4, LGUI, FN7, MO2, MO1, SPC, FN5, RALT, MO3, FN0), [1] = LAYOUT_kc( TRNS, FN10, FN11, FN12, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, UP, DEL, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGUP, LEFT, RGHT, @@ -37,9 +41,6 @@ enum macro_id const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_MINS), - [1] = ACTION_LAYER_MOMENTARY(1), // FN1 - [2] = ACTION_LAYER_MOMENTARY(2), // FN2 - [3] = ACTION_LAYER_MOMENTARY(3), // FN3 [4] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_GRV), [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_RGUI), [6] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_CAPS), diff --git a/keyboards/keebio/nyquist/keymaps/DivergeJM/keymap.c b/keyboards/keebio/nyquist/keymaps/DivergeJM/keymap.c index c0c1760cd1..ba12e1bf53 100644 --- a/keyboards/keebio/nyquist/keymaps/DivergeJM/keymap.c +++ b/keyboards/keebio/nyquist/keymaps/DivergeJM/keymap.c @@ -47,13 +47,11 @@ enum { const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), //Hold for momentary Lower layer, Tap for Space, [1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_ENT), //Hold for momentary Mouse layer, Tap for Enter, - [2] = ACTION_LAYER_MOMENTARY(_FUNCTION), //Hold for momentary Function - [3] = ACTION_LAYER_MOMENTARY(_MOUSE) //Hold for momentary MOUSE }; #define SPC_LW FUNC(0) #define ENT_RS FUNC(1) -#define FNC FUNC(2) -#define MSE FUNC(3) +#define FNC MO(_FUNCTION) +#define MSE MO(_MOUSE) #define PIPE M(R_PIPE) #define POINT M(R_POINT) diff --git a/keyboards/org60/keymaps/boardy/keymap.c b/keyboards/org60/keymaps/boardy/keymap.c index 43994f189f..b85e475824 100644 --- a/keyboards/org60/keymaps/boardy/keymap.c +++ b/keyboards/org60/keymaps/boardy/keymap.c @@ -54,7 +54,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //--------------------------------------------------------------------------------------------------------------------------------------| // | | | | |░░░░░░| | | | // | | | | |░░░░░░| | | | - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, F(0), KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FUNCTION),KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT), //--------------------------------------------------------------------------------------------------------------------------------------' @@ -103,19 +103,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //--------------------------------------------------------------------------------------------------------------------------------------| // | | | | |░░░░░░| | | | // | | | | |░░░░░░| | | | - KC_LCTL, KC_LGUI, KC_LALT, KC_0, F(0), KC_NO, KC_MUTE, KC_VOLD, KC_MPLY), + KC_LCTL, KC_LGUI, KC_LALT, KC_0, MO(_FUNCTION),KC_NO, KC_MUTE, KC_VOLD, KC_MPLY), //--------------------------------------------------------------------------------------------------------------------------------------' }; - -// Custom Actions -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(_FUNCTION), // to Function overlay -}; - - // Loop void matrix_scan_user(void) { // Empty -}; \ No newline at end of file +}; diff --git a/keyboards/planck/keymaps/angerthosenear/keymap.c b/keyboards/planck/keymaps/angerthosenear/keymap.c index aa75a67715..f22bb1f622 100644 --- a/keyboards/planck/keymaps/angerthosenear/keymap.c +++ b/keyboards/planck/keymaps/angerthosenear/keymap.c @@ -5,34 +5,31 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT}, - {KC_LCTL, KC_LGUI, KC_LALT, BL_STEP, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_LCTL, KC_LGUI, KC_LALT, BL_STEP, MO(3), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} // Space is repeated to accommodate for both spacebar wiring positions }, [1] = { /* WASD + NumPad */ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PSLS, KC_PMNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PAST, KC_PPLS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PDOT, KC_PENT, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_SPC, KC_P0, FUNC(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(3), KC_SPC, KC_P0, MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} }, [2] = { /* RAISE */ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS}, {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, {KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, MO(2), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [3] = { /* LOWER */ {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_DEL}, {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)}, {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END} } }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE - [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER - [3] = ACTION_DEFAULT_LAYER_SET(0), [4] = ACTION_DEFAULT_LAYER_SET(1), diff --git a/keyboards/planck/keymaps/austin/keymap.c b/keyboards/planck/keymaps/austin/keymap.c index 40f808654e..23dc2d4150 100644 --- a/keyboards/planck/keymaps/austin/keymap.c +++ b/keyboards/planck/keymaps/austin/keymap.c @@ -5,35 +5,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, - {BL_STEP, KC_LGUI, KC_LALT, KC_LCTL, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {BL_STEP, KC_LGUI, KC_LALT, KC_LCTL, MO(3), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} // Space is repeated to accommadate for both spacebar wiring positions }, [1] = { /* Colemak */ {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, - {KC_FN3, KC_LGUI, KC_LALT, KC_LCTL, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_FN3, KC_LGUI, KC_LALT, KC_LCTL, MO(3), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, [2] = { /* RAISE */ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, {KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [3] = { /* LOWER */ {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)}, {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} } }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE - [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER - [3] = ACTION_DEFAULT_LAYER_SET(0), [4] = ACTION_DEFAULT_LAYER_SET(1), -}; \ No newline at end of file +}; diff --git a/keyboards/planck/keymaps/charlie/keymap.c b/keyboards/planck/keymaps/charlie/keymap.c index 966c60d20d..d5e17d7f9c 100644 --- a/keyboards/planck/keymaps/charlie/keymap.c +++ b/keyboards/planck/keymaps/charlie/keymap.c @@ -11,20 +11,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_DELETE, KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, FUNC(1)}, {KC_O, KC_G, KC_S, KC_U, KC_T, FUNC(27), KC_F21, KC_F10, KC_F11, KC_F7, KC_F8, KC_F9}, {KC_TAB, FUNC(4), FUNC(5), FUNC(6), KC_F1, FUNC(7), KC_F18, KC_F19, KC_F23, KC_F20, KC_F22, FUNC(9)}, - {KC_COMM, KC_DOT, KC_R, FUNC(11), FUNC(3), KC_SPC, FUNC(12), KC_F2, FUNC(8), KC_F3, KC_F14} + {KC_COMM, KC_DOT, KC_R, FUNC(11), MO(2), KC_SPC, FUNC(12), KC_F2, FUNC(8), KC_F3, KC_F14} }, [2] = { /* 2: FUNC(3 PHOTOSHOP */ {KC_ESC, FUNC(25), FUNC(26), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, FUNC(19), FUNC(20), FUNC(21)}, {KC_C, KC_NO, FUNC(22), FUNC(5), KC_NO, FUNC(23), KC_NO, KC_NO, KC_NO, KC_NO, FUNC(13), KC_NO}, - {FUNC(14), FUNC(15), FUNC(16), FUNC(17), FUNC(3), KC_SPC, FUNC(18), KC_NO, KC_NO, KC_F24, KC_NO} + {FUNC(14), FUNC(15), FUNC(16), FUNC(17), MO(2), KC_SPC, FUNC(18), KC_NO, KC_NO, KC_F24, KC_NO} } }; const uint16_t PROGMEM fn_actions[] = { [1] = ACTION_DEFAULT_LAYER_SET(0), // set Qwerty layout [2] = ACTION_DEFAULT_LAYER_SET(1), // set Photoshop presets - [3] = ACTION_LAYER_MOMENTARY(2), // Photoshop function layer [4] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F9), // photo folder AHK [5] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_I), // select inverse diff --git a/keyboards/planck/keymaps/daniel/keymap.c b/keyboards/planck/keymaps/daniel/keymap.c index 3054d7974b..ae47b9ba3d 100644 --- a/keyboards/planck/keymaps/daniel/keymap.c +++ b/keyboards/planck/keymaps/daniel/keymap.c @@ -5,33 +5,26 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, - {FUNC(3), KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {MO(3), KC_LCTL, KC_LALT, KC_LGUI, MO(2), KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} // Space is repeated to accommadate for both spacebar wiring positions }, [1] = { /* RAISE */ {KC_GRV, S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_EQL}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, S(KC_MINS), KC_BSLS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [2] = { /* LOWER */ {S(KC_GRV), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, S(KC_EQL)}, {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_ENT}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [3] = { /* Qwerty */ {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL}, {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, - {KC_TRNS, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_TRNS, KC_LCTL, KC_LALT, KC_LGUI, MO(2), KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} // Space is repeated to accommadate for both spacebar wiring positions } }; - - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // to RAISE - [2] = ACTION_LAYER_MOMENTARY(2), // to LOWER - [3] = ACTION_LAYER_MOMENTARY(3) // to LOWER -}; diff --git a/keyboards/planck/keymaps/david/keymap.c b/keyboards/planck/keymaps/david/keymap.c index d8a46aa833..bb0abaab7c 100644 --- a/keyboards/planck/keymaps/david/keymap.c +++ b/keyboards/planck/keymaps/david/keymap.c @@ -5,33 +5,30 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_A, KC_S, KC_D, KC_F, KC_G, KC_ENT, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, - {M(10), KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {M(10), KC_LCTL, KC_LALT, KC_LGUI, MO(3), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} // Space is repeated to accommadate for both spacebar wiring positions }, [1] = { /* Colemak */ {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, - {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, MO(3), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, [2] = { /* RAISE */ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {KC_TRNS, FUNC(3), FUNC(4), RESET, M(0), M(1), M(2), KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, {KC_TRNS, KC_F11, KC_F12, M(0), M(1), M(2), M(3), M(4), M(5), M(6), M(7), KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [3] = { /* LOWER */ {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, {KC_TRNS, FUNC(3), FUNC(4), RESET, M(0), M(1), M(2), S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)}, {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} } }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE - [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER - [3] = ACTION_DEFAULT_LAYER_SET(0), [4] = ACTION_DEFAULT_LAYER_SET(1), diff --git a/keyboards/planck/keymaps/dzobert/keymap.c b/keyboards/planck/keymaps/dzobert/keymap.c index 365649ed87..3cd8731b06 100644 --- a/keyboards/planck/keymaps/dzobert/keymap.c +++ b/keyboards/planck/keymaps/dzobert/keymap.c @@ -5,33 +5,30 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_TAB}, {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_BSPC}, {KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, - {KC_FN4, KC_RSFT, KC_LGUI, KC_LSFT, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_FN4, KC_RSFT, KC_LGUI, KC_LSFT, MO(3), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} // Space is repeated to accommadate for both spacebar wiring positions }, [1] = { /* Colemak */ {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_TAB}, {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_BSPC}, {KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, - {KC_FN3, KC_RSFT, KC_LGUI, KC_LSFT, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_FN3, KC_RSFT, KC_LGUI, KC_LSFT, MO(3), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, [2] = { /* RAISE */ {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, {KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_DEL}, {KC_TRNS, KC_GRV, KC_MINS, KC_EQL, KC_QUOT, S(KC_QUOT), S(KC_LBRC), S(KC_RBRC), KC_LBRC, KC_RBRC, KC_BSLS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_HOME, KC_PGUP, KC_PGDN, KC_END} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_HOME, KC_PGUP, KC_PGDN, KC_END} }, [3] = { /* LOWER */ {KC_POWER,KC_PSCR, KC_SLCK, KC_PAUSE, KC_NLCK, KC_EXECUTE, KC_MENU, KC_APP, KC_7, KC_8, KC_9, KC_KP_SLASH}, {KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_CAPS, KC_CANCEL, KC_UNDO, KC_AGAIN, KC_4, KC_5, KC_6, KC_KP_ASTERISK}, {KC_TRNS, KC_INSERT,KC_CUT, KC_COPY, KC_PASTE, KC_BSLS, KC_9, KC_0, KC_1, KC_2, KC_3, KC_KP_MINUS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_KP_DOT, KC_KP_ENTER, KC_KP_PLUS} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_KP_DOT, KC_KP_ENTER, KC_KP_PLUS} } }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE - [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER - [3] = ACTION_DEFAULT_LAYER_SET(0), [4] = ACTION_DEFAULT_LAYER_SET(1), diff --git a/keyboards/planck/keymaps/joe/keymap.c b/keyboards/planck/keymaps/joe/keymap.c index 023e1a1201..ff17fa2366 100644 --- a/keyboards/planck/keymaps/joe/keymap.c +++ b/keyboards/planck/keymaps/joe/keymap.c @@ -6,50 +6,47 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {F(3), KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_MINS}, {KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT }, {F(15), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_UP, KC_QUOT}, - {KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, F(1), KC_SPC, KC_SPC, F(2), KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT} + {KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, MO(4),KC_SPC, KC_SPC, MO(5),KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT} }, [1] = { /* Joe soft Colemak */ {F(3), CM_Q, CM_W, CM_F, CM_P, CM_G, CM_J, CM_L, CM_U, CM_Y, CM_SCLN, KC_MINS}, {KC_BSPC, CM_A, CM_R, CM_S, CM_T, CM_D, CM_H, CM_N, CM_E, CM_I, CM_O, KC_ENT }, {F(15), CM_Z, CM_X, CM_C, CM_V, CM_B, CM_K, CM_M, KC_COMM, KC_DOT, KC_UP, KC_QUOT}, - {KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, F(1), KC_SPC, KC_SPC, F(2), KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT} + {KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, MO(4),KC_SPC, KC_SPC, MO(5),KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT} }, [2] = { /* Joe NUMPAD */ {F(3), KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, LSFT(KC_9), LSFT(KC_0), KC_PSLS, KC_P7, KC_P8, KC_P9 }, {KC_BSPC, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, LSFT(KC_5), KC_PEQL, KC_PAST, KC_P4, KC_P5, KC_P6 }, {F(15), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PCMM, KC_PMNS, KC_P1, KC_P2, KC_P3 }, - {KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, F(1), KC_TRNS, KC_TRNS, F(2), KC_PPLS, KC_P0, KC_PDOT, KC_PENT} + {KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, MO(4), KC_TRNS, KC_TRNS, MO(5), KC_PPLS, KC_P0, KC_PDOT, KC_PENT} }, [3] = { /* Joe 1337 haxOr5*/ {F(3), KC_Q, KC_W, KC_F, KC_P, KC_6, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_MINS}, {KC_BSPC, KC_4, KC_R, KC_5, KC_7, KC_D, KC_H, KC_N, KC_3, KC_1, KC_0, KC_ENT }, {F(15), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_UP, KC_QUOT}, - {KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, F(1), KC_SPC, KC_SPC, F(2), KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT} + {KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, MO(4),KC_SPC, KC_SPC, MO(5),KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT} }, [4] = { /* Joe LOWER fn1 */ {KC_GRV, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, M(3), M(2), M(1), M(0) }, {KC_BSPC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS}, {KC_BSLS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LBRC, KC_RBRC, KC_PGUP, KC_EQL }, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(1), KC_TRNS, KC_TRNS, F(2), KC_NO, KC_HOME, KC_PGDN, KC_END } + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(4), KC_TRNS, KC_TRNS, MO(5), KC_NO, KC_HOME, KC_PGDN, KC_END } }, [5] = { /* Joe UPPER fn2 */ {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 }, {KC_DEL, KC_BTN1, KC_MS_U, KC_BTN2, KC_BTN3, KC_WH_U, KC_BTN4, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_NO }, {KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_L, KC_WH_D, KC_WH_R, KC_NO, KC_NO, LCTL(KC_PGUP), LCTL(LALT(KC_UP)), LCTL(KC_PGDN) }, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(1), KC_NO, KC_NO, F(2), KC_NO, LCTL(LALT(KC_LEFT)), LCTL(LALT(KC_DOWN)), LCTL(LALT(KC_RGHT))} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(4), KC_NO, KC_NO, MO(5), KC_NO, LCTL(LALT(KC_LEFT)), LCTL(LALT(KC_DOWN)), LCTL(LALT(KC_RGHT))} }, [6] = { /* Joe SPECIAL fn3 */ {KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, {KC_NO, KC_MPLY, KC_MPRV, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET }, {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, - {F(6), F(7), F(8), F(9), F(1), KC_TRNS, KC_TRNS, F(2), KC_POWER, KC_WAKE, KC_SLEP, LCTL(LALT(KC_L))} + {F(6), F(7), F(8), F(9), MO(4), KC_TRNS, KC_TRNS, MO(5), KC_POWER, KC_WAKE, KC_SLEP, LCTL(LALT(KC_L))} } }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(4), // fn1 - [2] = ACTION_LAYER_MOMENTARY(5), // fn2 - /* ESC on tap, fn3 on hold */ [3] = ACTION_LAYER_TAP_KEY(6, KC_ESC), diff --git a/keyboards/planck/keymaps/kyle/keymap.c b/keyboards/planck/keymaps/kyle/keymap.c index f113d0e036..eee5090139 100644 --- a/keyboards/planck/keymaps/kyle/keymap.c +++ b/keyboards/planck/keymaps/kyle/keymap.c @@ -5,33 +5,30 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, - {KC_RCTL, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_RCTL, KC_LCTL, KC_LALT, KC_LGUI, MO(3), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} // Space is repeated to accommadate for both spacebar wiring positions }, [1] = { /* Colemak */ {KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, {KC_TAB, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, - {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, MO(3), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, [2] = { /* RAISE */ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, {KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [3] = { /* LOWER */ {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), LSFT(RSFT(KC_D)), KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)}, {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS}, - {BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} } }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE - [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER - [3] = ACTION_DEFAULT_LAYER_SET(0), [4] = ACTION_DEFAULT_LAYER_SET(1), diff --git a/keyboards/planck/keymaps/leo/keymap.c b/keyboards/planck/keymaps/leo/keymap.c index 25a5e1579d..d45f87a5d2 100644 --- a/keyboards/planck/keymaps/leo/keymap.c +++ b/keyboards/planck/keymaps/leo/keymap.c @@ -5,7 +5,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_ESC, KC_LBRC, KC_QUOT, KC_SCLN, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, {KC_TAB, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT}, {KC_LSFT, KC_DOT, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_COMM}, - {KC_LCTL, KC_LALT, KC_LGUI, FUNC(3), FUNC(2), KC_SPC, KC_SPC, FUNC(1), FUNC(3), KC_RGUI, KC_RALT, KC_RCTL} + {KC_LCTL, KC_LALT, KC_LGUI, MO(4), MO(3), KC_SPC, KC_SPC, MO(2), MO(4), KC_RGUI, KC_RALT, KC_RCTL} }, [2] = { /* RAISE */ {RALT(KC_RBRC), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, S(KC_RBRC)}, @@ -26,10 +26,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} } }; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE - [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER - [3] = ACTION_LAYER_MOMENTARY(4), // to META - -}; \ No newline at end of file diff --git a/keyboards/planck/keymaps/lucas/keymap.c b/keyboards/planck/keymaps/lucas/keymap.c index 491cd1d07d..96393bc35d 100644 --- a/keyboards/planck/keymaps/lucas/keymap.c +++ b/keyboards/planck/keymaps/lucas/keymap.c @@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Z, DE_SCLN, DE_MINS}, {KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, DE_QUOT}, {M(0), KC_Y, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, DE_COMM, DE_DOT, DE_SLSH, KC_ENT}, - {KC_LCTL, KC_LGUI, KC_TAB, KC_LALT, F(2), F(3), F(3), F(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_LCTL, KC_LGUI, KC_TAB, KC_LALT, MO(3),F(3), F(3), MO(2),KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, [1] = { /* Symbols * ,-----------------------------------------------------------------------. @@ -93,7 +93,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24}, {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PMNS, KC_PPLS, KC_NO, KC_NO, KC_NO, RESET, KC_NO}, - {KC_NO, BL_TOGG, BL_DEC, BL_INC, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_NO, BL_TOGG, BL_DEC, BL_INC, MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY} }, [5] = { /* Gaming * ,-----------------------------------------------------------------------. @@ -131,8 +131,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE - [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER [3] = ACTION_LAYER_TAP_KEY(4,KC_SPC), // to Function [4] = ACTION_LAYER_TOGGLE(5), // toggle Gaming [5] = ACTION_MODS_TAP_KEY(KC_LSFT, KC_CAPS), //Shift on press, Caps on tap diff --git a/keyboards/planck/keymaps/max/keymap.c b/keyboards/planck/keymaps/max/keymap.c index a93b1f47d1..a80d677c64 100644 --- a/keyboards/planck/keymaps/max/keymap.c +++ b/keyboards/planck/keymaps/max/keymap.c @@ -5,34 +5,31 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT }, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT}, - {KC_LCTL, BL_STEP, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_LCTL, BL_STEP, KC_LALT, KC_LGUI, MO(3), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} // Space is repeated to accommadate for both spacebar wiring positions }, [1] = { /* Colemak */ {KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, {KC_TAB, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT }, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT}, - {KC_LCTL, BL_STEP, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_LCTL, BL_STEP, KC_LALT, KC_LGUI, MO(3), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, [2] = { /* RAISE */ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_TRNS}, {KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_BSLS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [3] = { /* LOWER */ {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), KC_TRNS}, {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, S(KC_BSLS)}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} } }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE - [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER - [3] = ACTION_DEFAULT_LAYER_SET(0), [4] = ACTION_DEFAULT_LAYER_SET(1), -}; \ No newline at end of file +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_brett.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_brett.c index 3ebd82af4f..cdebcd1433 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_brett.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_brett.c @@ -1,26 +1,26 @@ #include "keymap.h" +#define KC_MO1 MO(1) +#define KC_MO2 MO(2) + const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, LCTL, A, S, D, F, G, H, J, K, L, SCLN, ENT, LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, - TAB, LGUI, RSFT, LALT, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), + TAB, LGUI, RSFT, LALT, MO2, SPC, MO1, LEFT, DOWN, UP, RGHT), [1] = KEYMAP( /* RAISE */ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DEL, TRNS, F1, F2, F3, F4, F5, F6, 4, 5, 6, QUOT, TRNS, TRNS, F7, F8, F9, F10, F11, F12, 1, 2, 3, TRNS, PGUP, - MPRV, MNXT, TRNS, MUTE, TRNS, TRNS, FN1, 0, 0, TRNS, PGDN), + MPRV, MNXT, TRNS, MUTE, TRNS, TRNS, MO1, 0, 0, TRNS, PGDN), [2] = KEYMAP( /* LOWER */ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, TRNS, TRNS, TRNS, PAUSE, TRNS, TRNS, TRNS, TRNS, LBRC, RBRC, BSLS, EQL, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - MPLY, MSTP, VOLU, VOLD, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), + MPLY, MSTP, VOLU, VOLD, MO2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay - [2] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_dotcom.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_dotcom.c index d4ec987abd..5a85a6086c 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_dotcom.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_dotcom.c @@ -1,20 +1,20 @@ #include "keymap.h" +#define KC_MO1 MO(1) + const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, - FN1, A, S, D, F, G, H, J, K, L, SCLN, ENT, + MO1, A, S, D, F, G, H, J, K, L, SCLN, ENT, LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, LBRC, LCTL, BSLS, QUOT, LALT, FN22, SPC, LEFT, UP, DOWN, RGHT, RBRC), [1] = KEYMAP( GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DEL, TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, TRNS, TRNS, TRNS, TRNS, FN18, FN19, FN22, EQL, MINS, FN20, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, TRNS, VOLD, VOLU, TRNS), + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MO1, TRNS, VOLD, VOLU, TRNS), }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_jack.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_jack.c index 4237949d54..14db7feaa0 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_jack.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_jack.c @@ -1,31 +1,31 @@ #include "keymap.h" +#define KC_MO2 MO(2) +#define KC_MO3 MO(3) + const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( /* Jack */ TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, ESC, A, S, D, F, G, H, J, K, L, SCLN, QUOT, LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, - RSFT, LCTL, LALT, LGUI, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), + RSFT, LCTL, LALT, LGUI, MO3, SPC, MO2, LEFT, DOWN, UP, RGHT), [1] = KEYMAP( /* Jack colemak */ TAB, Q, W, F, P, G, J, L, U, Y, SCLN, BSPC, ESC, A, R, S, T, D, H, N, E, I, O, QUOT, LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, ENT, - FN3, LCTL, LALT, LGUI, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), + FN3, LCTL, LALT, LGUI, MO3, SPC, MO2, LEFT, DOWN, UP, RGHT), [2] = KEYMAP( /* Jack RAISE */ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, TRNS, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, MNXT, VOLD, VOLU, MPLY), + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MO2, MNXT, VOLD, VOLU, MPLY), [3] = KEYMAP( /* Jack LOWER */ FN22, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC, TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, - TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY), + TRNS, TRNS, TRNS, TRNS, MO3, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY), }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay - [3] = ACTION_DEFAULT_LAYER_SET(0), [4] = ACTION_DEFAULT_LAYER_SET(1), diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_joe.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_joe.c index b8251c8573..efd188a8ee 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_joe.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_joe.c @@ -1,26 +1,30 @@ #include "keymap.h" +#define KC_MO2 MO(2) +#define KC_MO3 MO(3) +#define KC_MO4 MO(4) + const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( /* Joe qwerty */ ESC, Q, W, E, R, T, Y, U, I, O, P, MINS, BSPC, A, S, D, F, G, H, J, K, L, SCLN, ENTER, FN7, Z, X, C, V, B, N, M, COMM, DOT, SLSH, QUOT, - LCTL, LGUI, LALT, LSFT, FN1, SPC, FN0, LEFT, UP, DOWN, RGHT), + LCTL, LGUI, LALT, LSFT, MO3, SPC, MO2, LEFT, UP, DOWN, RGHT), [1] = KEYMAP( /* Joe colemak */ ESC, Q, W, F, P, G, J, L, U, Y, SCLN, MINS, BSPC, A, R, S, T, D, H, N, E, I, O, ENTER, FN7, Z, X, C, V, B, K, M, COMM, DOT, SLSH, QUOT, - LCTL, LGUI, LALT, LSFT, FN1, SPC, FN0, LEFT, UP, DOWN, RGHT), + LCTL, LGUI, LALT, LSFT, MO3, SPC, MO2, LEFT, UP, DOWN, RGHT), [2] = KEYMAP( /* Joe UPPER */ F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MENU, CAPS, INS, PSCR, TRNS, FN5, FN6, - TRNS, TRNS, TRNS, TRNS, FN2, TRNS, FN0, FN26, FN27, FN28, FN29), + TRNS, TRNS, TRNS, TRNS, MO4, TRNS, MO2, FN26, FN27, FN28, FN29), [3] = KEYMAP( /* Joe LOWER */ GRV, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN8, FN9, FN30, BSPC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, TRNS, BSLS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LBRC, RBRC, TRNS, EQL, - TRNS, TRNS, TRNS, TRNS, FN1, TRNS, FN2, HOME, PGUP, PGDN, END), + TRNS, TRNS, TRNS, TRNS, MO3, TRNS, MO4, HOME, PGUP, PGDN, END), [4] = KEYMAP( /* Joe LOWER + UPPER */ FN3, FN4, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, SLEP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, @@ -35,10 +39,6 @@ enum macro_id { }; const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - [1] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay - [2] = ACTION_LAYER_MOMENTARY(4), // to Fn overlay - [3] = ACTION_DEFAULT_LAYER_SET(0), [4] = ACTION_DEFAULT_LAYER_SET(1), diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_matthew.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_matthew.c index 196b2d7773..fe0dfa619c 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_matthew.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_matthew.c @@ -22,12 +22,15 @@ #include "keymap.h" +#define KC_MO1 MO(1) +#define KC_MO2 MO(2) + const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* 0: dvorak */ [0] = KEYMAP_GRID( ESC, SCLN, COMM, DOT, P, Y, F, G, C, R, L, BSPC, \ GRV, A, O, E, U, I, D, H, T, N, S, MINS, \ TAB, QUOT, Q, J, K, X, B, M, W, V, Z, ENT, \ - LCTL, LGUI, LALT, RALT, FN1, LSFT, SPC, FN2, LEFT, DOWN, UP, RGHT), + LCTL, LGUI, LALT, RALT, MO1, LSFT, SPC, MO2, LEFT, DOWN, UP, RGHT), /* 1: lower (FN1) */ [1] = KEYMAP_GRID( F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, \ @@ -44,9 +47,6 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // lower Fn layer - [2] = ACTION_LAYER_MOMENTARY(2), // raise Fn layer - // lower row1 [17] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // % [18] = ACTION_MODS_KEY(MOD_LSFT, KC_SLASH), // ? diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_nathan.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_nathan.c index f0be4b0306..7cc5e7f0ac 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_nathan.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_nathan.c @@ -3,6 +3,9 @@ #include "keymap.h" +#define KC_MO1 MO(1) +#define KC_MO2 MO(2) + const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* 0: main layer * ,-----------------------------------------------------------------------. @@ -19,7 +22,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, LCTL, A, S, D, F, G, H, J, K, L, SCLN, ENT, RSFT, Z, X, C, V, B, N, M, LBRC, FN10, FN11, FN12, - LGUI, BSLS, SLSH, LALT, FN0, SPC, SPC, FN1, LEFT, DOWN, UP, RGHT), + LGUI, BSLS, SLSH, LALT, MO1, SPC, SPC, MO2, LEFT, DOWN, UP, RGHT), /* 1: fn left/lower layer * The top row are Visual Studio combos: @@ -73,8 +76,6 @@ enum macro_id { }; const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // left/lower layer - [1] = ACTION_LAYER_MOMENTARY(2), // right/raise layer // Program macros [2] = ACTION_MACRO(M_P0), [3] = ACTION_MACRO(M_P1), diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_paul.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_paul.c index 51d45be75b..829c047be6 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_paul.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_paul.c @@ -1,32 +1,32 @@ #include "keymap.h" +#define KC_MO1 MO(1) +#define KC_MO2 MO(2) +#define KC_MO3 MO(3) + const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( /* Paul */ TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, - FN1, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + MO1, A, S, D, F, G, H, J, K, L, SCLN, QUOT, LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, - ESC, LCTL, LALT, LGUI, FN2, SPC, FN3, LEFT, DOWN, UP, RGHT), + ESC, LCTL, LALT, LGUI, MO2, SPC, MO3, LEFT, DOWN, UP, RGHT), [1] = KEYMAP( /* Paul FN */ TRNS, TRNS, TRNS, FN8, FN9, TRNS, TRNS, TRNS, TRNS, MUTE, VOLD, VOLU, - FN1, TRNS, TRNS, HOME, END, TRNS, TRNS, TRNS, TRNS, MPRV, MPLY, MNXT, + MO1, TRNS, TRNS, HOME, END, TRNS, TRNS, TRNS, TRNS, MPRV, MPLY, MNXT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LEFT, DOWN, RGHT), [2] = KEYMAP( /* Paul LOWER */ FN22, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, - TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), + TRNS, TRNS, TRNS, TRNS, MO2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), [3] = KEYMAP( /* Paul RAISE */ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, TRNS, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN3, TRNS, TRNS, TRNS, TRNS), + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MO3, TRNS, TRNS, TRNS, TRNS), }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // to Fn1 overlay (FN) - [2] = ACTION_LAYER_MOMENTARY(2), // to Fn2 overlay (LOWER) - [3] = ACTION_LAYER_MOMENTARY(3), // to Fn3 overlay (RAISE) - [8] = ACTION_MODS_KEY(MOD_LSFT, KC_HOME), [9] = ACTION_MODS_KEY(MOD_LSFT, KC_END), [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_reed.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_reed.c index f721716fde..9e6e953e31 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_reed.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_reed.c @@ -1,5 +1,8 @@ #include "keymap.h" +#define KC_MO2 MO(2) +#define KC_MO3 MO(3) + /* * BUILD: * Simply run the command below in the keyboards/planck directory @@ -23,30 +26,27 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN5, - LCTL, CAPS, LALT, LGUI, FN2, FN7, SPC, FN1, LEFT, DOWN, UP, RGHT), + LCTL, CAPS, LALT, LGUI, MO3, FN7, SPC, MO2, LEFT, DOWN, UP, RGHT), [1] = KEYMAP_GRID( /* Reed EXTREME GAMING */ ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN5, - LCTL, 1, 2, 3, 4, SPC, FN2, FN1, LEFT, DOWN, UP, RGHT), + LCTL, 1, 2, 3, 4, SPC, MO3, MO2, LEFT, DOWN, UP, RGHT), [2] = KEYMAP_GRID( /* Reed RAISE */ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, MNXT, VOLD, VOLU, MPLY), + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MO2, MNXT, VOLD, VOLU, MPLY), [3] = KEYMAP_GRID( /* Reed LOWER */ TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, DEL, TRNS, TRNS, INS, HOME, PGUP, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, TRNS, TRNS, DEL, END, PGDN, F11, F12, F13, TRNS, VOLD, VOLU, TRNS, - TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, MPRV, MUTE, MPLY, MNXT), + TRNS, TRNS, TRNS, TRNS, MO3, TRNS, TRNS, TRNS, MPRV, MUTE, MPLY, MNXT), }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - RAISE - [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay - LOWER - [3] = ACTION_DEFAULT_LAYER_SET(0), [4] = ACTION_DEFAULT_LAYER_SET(1), // Actions for the tap/hold modifiers listed above diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_sean.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_sean.c index 27a669e640..10a112986e 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_sean.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_sean.c @@ -8,6 +8,10 @@ enum planck_layers { _ADJUST }; +#define KC_LOWR MO(_LOWER) +#define KC_RAIS MO(_RAISE) +#define KC_ADJS MO(_ADJUST) + const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Dvorak @@ -25,7 +29,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { QUOT, COMM, DOT, P, Y, SLSH, EQL, F, G, C, R, L, A, O, E, U, I, ESC, BSPC, D, H, T, N, S, SCLN, Q, J, K, X, TAB, ENT, B, M, W, V, Z, - LSFT, LCTL, LALT, LGUI, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), + LSFT, LCTL, LALT, LGUI, LOWR, SPC, RAIS,LEFT, DOWN, UP, RGHT), /* Lower * ,-----------------------------------------------------------------------------------. @@ -42,7 +46,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { F1, F2, F3, F4, F5, FN26, FN27, F6, F7, F8, F9, F10, 1, 2, 3, 4, 5, LBRC, RBRC, 6, 7, 8, 9, 0, FN23, FN25, GRV,MINS, FN24, INS, DEL, FN19, FN20, FN22, EQL, BSLS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN4, HOME, PGDN, PGUP, END), + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, ADJS,HOME, PGDN, PGUP, END), /* Raise * ,-----------------------------------------------------------------------------------. @@ -59,7 +63,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { F11, F12, F13, F14, F15,MINS, FN24, F16, F17, F18, F19, F20, FN11, FN12, FN13, FN14, FN15, NO, NO, FN16, FN17, FN18, FN19, FN20, PWR, EJCT, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, - CAPS, TRNS, TRNS, TRNS, FN4, TRNS, FN2, NO, NO, NO, NO), + CAPS, TRNS, TRNS, TRNS, ADJS,TRNS, RAIS, NO, NO, NO, NO), /* Adjust (Lower + Raise or SLower + SRaise) * ,-----------------------------------------------------------------------------------. * | | Reset| | | | | | | | | | | @@ -79,10 +83,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(_LOWER), // to Fn overlay LOWER - [2] = ACTION_LAYER_MOMENTARY(_RAISE), // to Fn overlay RAISE [3] = ACTION_DEFAULT_LAYER_SET(_DVRK), - [4] = ACTION_LAYER_MOMENTARY(_ADJUST), // RAISE + LOWER [11] = ACTION_MODS_KEY(MOD_LSFT, KC_1), //! [12] = ACTION_MODS_KEY(MOD_LSFT, KC_2), //@ [13] = ACTION_MODS_KEY(MOD_LSFT, KC_3), //# diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_shane.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_shane.c index 2191758c8c..69ce9b8e09 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_shane.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_shane.c @@ -3,6 +3,9 @@ #include "action.h" #include "action_util.h" +#define KC_MO6 MO(6) +#define KC_MO8 MO(8) + /* Shane's Planck Layout http://www.keyboard-layout-editor.com/#/layouts/015d9011102619d7695c86ffe57cf441 @@ -12,7 +15,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, E, R, T, Y, U, I, O, P, MINS, LCTL, A, S, D, F, G, H, J, K, L, SCLN, BSPC, LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN5, - /*ALPHA*/FN3, /*HYPER*/ /*SUPER*/LGUI, /*META*/LALT, LCTL, FN2, FN6, FN1, LEFT, DOWN, UP, RGHT), + /*ALPHA*/FN3, /*HYPER*/ /*SUPER*/LGUI, /*META*/LALT, LCTL, MO8, FN6, MO6, LEFT, DOWN, UP, RGHT), [2] = KEYMAP_AND_SWAP( /* More modifiers */ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, @@ -72,8 +75,6 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(6), // to fist Fn overlay - [2] = ACTION_LAYER_MOMENTARY(8), // to second Fn overlay [3] = ACTION_LAYER_TOGGLE(2), // toggle more modifiers [4] = ACTION_LAYER_TOGGLE(4), // toggle wasd [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), @@ -95,4 +96,4 @@ const uint16_t PROGMEM fn_actions[] = { [24] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), [25] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), [26] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), -}; \ No newline at end of file +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_simon.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_simon.c index 8058c2e109..fa948077ce 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_simon.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_simon.c @@ -1,11 +1,14 @@ #include "keymap.h" +#define KC_MO1 MO(1) +#define KC_MO2 MO(2) + const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( /* Jack */ ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, TAB, A, S, D, F, G, H, J, K, L, DOT, ENT, LSFT, Z, X, C, V, B, N, M, COMM, DOT, SCLN, DEL, - LCTL, ENT, LALT, CAPS, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), + LCTL, ENT, LALT, CAPS, MO2, SPC, MO1, LEFT, DOWN, UP, RGHT), [1] = KEYMAP( /* Jack RAISE */ TRNS, F1, F2, F3, F4, NO, FN11, FN9, FN12, NO, FN14, TRNS, TRNS, F5, F6, F7, F8, FN16, SLSH, MINS, EQL, LBRC, FN8, TRNS, @@ -18,9 +21,6 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay - [2] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - [8] = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH), [9] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT), [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_tim.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_tim.c index 64d0b74039..5be56e7256 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_tim.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_tim.c @@ -1,26 +1,26 @@ #include "keymap.h" +#define KC_MO2 MO(2) +#define KC_MO3 MO(3) + const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, TAB, A, S, D, F, G, H, J, K, L, SCLN, ENT, LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, - LCTL, LALT, DEL, LGUI, FN2, SPC, FN1, F2, F5, F9, F12), + LCTL, LALT, DEL, LGUI, MO3, SPC, MO2, F2, F5, F9, F12), [2] = KEYMAP( /* RAISE */ TRNS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, GRV, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, FN29, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, TRNS, TRNS, TRNS, TRNS), + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MO2, TRNS, TRNS, TRNS, TRNS), [3] = KEYMAP( /* LOWER */ TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC, FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, FN29, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), + TRNS, TRNS, TRNS, TRNS, MO3, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay - [3] = ACTION_DEFAULT_LAYER_SET(0), [4] = ACTION_DEFAULT_LAYER_SET(1), diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_wilba.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_wilba.c index 22326ebe45..5bf06382d7 100644 --- a/keyboards/planck/old_keymap_files/common_keymaps/keymap_wilba.c +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_wilba.c @@ -1,31 +1,31 @@ #include "keymap.h" +#define KC_MO2 MO(2) +#define KC_MO3 MO(3) + const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( /* Wilba */ FN27, FN28, FN29, E, R, T, Y, U, I, O, P, BSPC, TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, - LCTL, LGUI, LALT, RSFT, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), + LCTL, LGUI, LALT, RSFT, MO2, SPC, MO3, LEFT, DOWN, UP, RGHT), [1] = KEYMAP( /* Wilba Alternate */ ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, - LCTL, LGUI, LALT, RSFT, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), + LCTL, LGUI, LALT, RSFT, MO2, SPC, MO3, LEFT, DOWN, UP, RGHT), [2] = KEYMAP( /* Wilba LOWER */ TRNS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, TRNS, TRNS, F11, F12, LBRC, RBRC, FN20, EQL, FN23, FN24, MINS, FN21, TRNS, TRNS, BSLS, GRV, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, FN1, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY), + TRNS, TRNS, TRNS, TRNS, MO2, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY), [3] = KEYMAP( /* Wilba RAISE */ TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, TRNS, TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, TRNS, FN25, FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS), + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MO3, TRNS, TRNS, TRNS, TRNS), }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // LOWER - [2] = ACTION_LAYER_MOMENTARY(3), // RAISE - [3] = ACTION_DEFAULT_LAYER_SET(0), [4] = ACTION_DEFAULT_LAYER_SET(1), diff --git a/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c b/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c index 7304c80c10..f7a66b96f5 100644 --- a/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c +++ b/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c @@ -31,14 +31,13 @@ along with this program. If not, see . #define KC_SPACEFN KC_FN0 #define KC_OSLS KC_FN3 #define KC_GMLK KC_FN1 -#define KC_FUNC KC_FN2 +#define KC_FUNC MO(2) #define MICMUTE RCTL(KC_LCTL) enum function_codes { F_SPACEFN = 0, F_OSLS = 3, F_GMLK = 1, - F_FUNC = 2 }; enum layer_names { @@ -154,7 +153,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM fn_actions[] = { [F_SPACEFN] = ACTION_LAYER_TAP_KEY(2, KC_SPACE), // SpaceFn layout 1 [F_GMLK] = ACTION_LAYER_TOGGLE(1), // Disable SpaceFn and Oneshot Shift - [F_FUNC] = ACTION_LAYER_MOMENTARY(2), // SpaceFn layout 1 [F_OSLS] = ACTION_MODS_ONESHOT(MOD_LSFT) // Oneshot Leftshift }; diff --git a/keyboards/sentraq/s60_x/keymaps/hasu/keymap.c b/keyboards/sentraq/s60_x/keymaps/hasu/keymap.c index 76398697c2..077f1c6277 100644 --- a/keyboards/sentraq/s60_x/keymaps/hasu/keymap.c +++ b/keyboards/sentraq/s60_x/keymaps/hasu/keymap.c @@ -1,5 +1,9 @@ #include QMK_KEYBOARD_H +#define KC_MO4 MO(4) +#define KC_MO6 MO(6) +#define KC_MO7 MO(7) + /* * Hasu */ @@ -22,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ CAPS, A, S, D, F, G, H, J, K, L, FN2, QUOT, NO, ENT, \ LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, FN1, NO, FN9, NO, \ - LCTL, LGUI, LALT, SPC, RALT, FN3, FN3, FN0), + LCTL, LGUI, LALT, SPC, RALT, MO6, MO6, MO4), /* Keymap 1: colemak ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ @@ -41,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, F, P, G, J, L, U, Y, SCLN, LBRC, RBRC, BSLS, \ BSPC, A, R, S, T, D, H, N, E, I, O, QUOT, NO, ENT, \ LSFT, NO, Z, X, C, V, B, K, M, COMM, DOT, SLSH, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, FN0), + LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, MO4), /* Keymap 2: dvorak ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ [ │ ] │▒▒▒▒▒│BKSPC│ @@ -60,7 +64,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, QUOT, COMM, DOT, P, Y, F, G, C, R, L, SLSH, EQL, BSLS, \ CAPS, A, O, E, U, I, D, H, T, N, S, MINS, NO, ENT, \ LSFT, NO, SCLN, Q, J, K, X, B, M, W, V, Z, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, FN0), + LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, MO4), /* Keymap 3: workman ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ @@ -79,7 +83,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, D, R, W, B, J, F, U, P, SCLN, LBRC, RBRC, BSLS, \ BSPC, A, S, H, T, G, Y, N, E, O, I, QUOT, NO, ENT, \ LSFT, NO, Z, X, M, C, V, K, L, COMM, DOT, SLSH, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, FN0), + LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, MO4), /* Overlay 4: HHKB mode ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │Grave│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ Del │ @@ -98,7 +102,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, SLCK, PAUS, UP, TRNS, INS, \ LCTL, VOLD, VOLU, MUTE, TRNS, TRNS, PAST, PSLS, HOME, PGUP, LEFT, RGHT, TRNS, ENT, \ LSFT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PPLS, PMNS, END, PGDN, DOWN, TRNS, RSFT, TRNS, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, FN4, TRNS), + LCTL, LGUI, LALT, SPC, RALT, RGUI, MO7, TRNS), /* Overlay 5: Vi mode (Slash) ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │Grave│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│BkSpc│ @@ -169,11 +173,8 @@ Lw: set Workman layout * Fn action definition */ const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(4), [1] = ACTION_LAYER_TAP_KEY(5, KC_SLASH), [2] = ACTION_LAYER_TAP_KEY(6, KC_SCLN), - [3] = ACTION_LAYER_MOMENTARY(6), - [4] = ACTION_LAYER_MOMENTARY(7), // to Layout selector [5] = ACTION_DEFAULT_LAYER_SET(0), // set qwerty layout [6] = ACTION_DEFAULT_LAYER_SET(1), // set colemak layout [7] = ACTION_DEFAULT_LAYER_SET(2), // set dvorak layout diff --git a/keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c b/keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c index b572b4484b..1ccefb6dd1 100644 --- a/keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c +++ b/keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c @@ -1,5 +1,7 @@ #include QMK_KEYBOARD_H +#define KC_MO1 MO(1) + /* * HHKB Layout */ @@ -21,7 +23,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSLS, GRV, \ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSPC, \ LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT, \ - LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, FN0, \ + LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, MO1, \ NO, LGUI, LALT, SPC, NO, RALT, RGUI, NO), /* 1: HHKB Fn layer ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ @@ -43,10 +45,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PPLS, PMNS, END, PGDN, DOWN, NO, TRNS, TRNS, \ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), }; - -/* - * Fn action definition - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), -}; diff --git a/keyboards/sentraq/s60_x/keymaps/jpec/keymap.c b/keyboards/sentraq/s60_x/keymaps/jpec/keymap.c index 4d84396e31..4b7208a9e2 100644 --- a/keyboards/sentraq/s60_x/keymaps/jpec/keymap.c +++ b/keyboards/sentraq/s60_x/keymaps/jpec/keymap.c @@ -16,6 +16,8 @@ along with this program. If not, see . #include QMK_KEYBOARD_H +#define KC_MO1 MO(1) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Layout 0: Default Layer * ,-----------------------------------------------------------. @@ -35,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NUHS, ENT, \ LSFT, NUBS, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ - FN1, LGUI, LALT, FN0, RALT, RGUI, APP, RCTL), + MO1, LGUI, LALT, FN0, RALT, RGUI, APP, RCTL), /* Layout 1: Function Layer * ,-----------------------------------------------------------. @@ -63,7 +65,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE), /* SpaceFn layout 1 */ - [1] = ACTION_LAYER_MOMENTARY(1), /* Momentary layout 1 */ [2] = ACTION_MODS_KEY(MOD_LSFT, KC_DEL), /* Cut */ [3] = ACTION_MODS_KEY(MOD_LCTL, KC_INS), /* Copy */ [4] = ACTION_MODS_KEY(MOD_LSFT, KC_INS), /* Paste */ diff --git a/keyboards/sentraq/s60_x/keymaps/poker/keymap.c b/keyboards/sentraq/s60_x/keymaps/poker/keymap.c index 61685b477a..3b38ed501b 100644 --- a/keyboards/sentraq/s60_x/keymaps/poker/keymap.c +++ b/keyboards/sentraq/s60_x/keymaps/poker/keymap.c @@ -1,5 +1,8 @@ #include QMK_KEYBOARD_H +#define KC_MO6 MO(6) +#define KC_MO7 MO(7) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* 0: qwerty ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ @@ -19,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT, \ LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + LCTL, LGUI, LALT, SPC, MO6, RGUI, APP, RCTL), /* 1: colemak ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ @@ -38,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, F, P, G, J, L, U, Y, SCLN, LBRC, RBRC, BSLS, \ BSPC, A, R, S, T, D, H, N, E, I, O, QUOT, NO, ENT, \ LSFT, NO, Z, X, C, V, B, K, M, COMM, DOT, SLSH, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + LCTL, LGUI, LALT, SPC, MO6, RGUI, APP, RCTL), /* 2: dvorak ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ [ │ ] │▒▒▒▒▒│BKSPC│ @@ -57,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, QUOT, COMM, DOT, P, Y, F, G, C, R, L, SLSH, EQL, BSLS, \ CAPS, A, O, E, U, I, D, H, T, N, S, MINS, NO, ENT, \ LSFT, NO, SCLN, Q, J, K, X, B, M, W, V, Z, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + LCTL, LGUI, LALT, SPC, MO6, RGUI, APP, RCTL), /* 3: workman ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ @@ -76,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, D, R, W, B, J, F, U, P, SCLN, LBRC, RBRC, BSLS, \ BSPC, A, S, H, T, G, Y, N, E, O, I, QUOT, NO, ENT, \ LSFT, NO, Z, X, M, C, V, K, L, COMM, DOT, SLSH, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + LCTL, LGUI, LALT, SPC, MO6, RGUI, APP, RCTL), /* 4: Poker with Arrow ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ @@ -136,7 +139,7 @@ FnS: toggle Arrow overlay */ LAYOUT_kc( ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ - TRNS, FN2, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME, INS, FN4, \ + TRNS, FN2, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME, INS, MO7, \ TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS, FN3, END, TRNS, TRNS, \ TRNS, TRNS, DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN, DEL, TRNS, TRNS, TRNS, \ TRNS, TRNS, TRNS, FN1, TRNS, TRNS, TRNS, TRNS), @@ -168,11 +171,9 @@ Lw: set Workman layout }; const uint16_t PROGMEM fn_actions[] = { /* Poker Layout */ - [0] = ACTION_LAYER_MOMENTARY(6), // to Fn overlay [1] = ACTION_LAYER_TOGGLE(4), // toggle arrow overlay [2] = ACTION_LAYER_TOGGLE(5), // toggle Esc overlay [3] = ACTION_MODS_KEY(MOD_RCTL|MOD_RSFT, KC_ESC), // Task(RControl,RShift+Esc) - [4] = ACTION_LAYER_MOMENTARY(7), // to Layout selector [5] = ACTION_DEFAULT_LAYER_SET(0), // set qwerty layout [6] = ACTION_DEFAULT_LAYER_SET(1), // set colemak layout [7] = ACTION_DEFAULT_LAYER_SET(2), // set dvorak layout diff --git a/keyboards/sentraq/s65_x/keymaps/kelorean/keymap.c b/keyboards/sentraq/s65_x/keymaps/kelorean/keymap.c index 7a0de8559d..371c2b8ef6 100644 --- a/keyboards/sentraq/s65_x/keymaps/kelorean/keymap.c +++ b/keyboards/sentraq/s65_x/keymaps/kelorean/keymap.c @@ -140,7 +140,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(_FL), // Momentary Fn overlay [1] = ACTION_LAYER_TOGGLE(_CM), //Toggle Colemak Layer overlay [2] = ACTION_LAYER_TOGGLE(_DV), // Toggle Dvorak Layer overlay [3] = ACTION_LAYER_TOGGLE(_AL), // Toggle Arrow Layer overlay diff --git a/keyboards/sentraq/s65_x/keymaps/nall/keymap.c b/keyboards/sentraq/s65_x/keymaps/nall/keymap.c index a5daed006a..37bd742b59 100644 --- a/keyboards/sentraq/s65_x/keymaps/nall/keymap.c +++ b/keyboards/sentraq/s65_x/keymaps/nall/keymap.c @@ -94,7 +94,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(_FL), // Momentary Fn overlay [1] = ACTION_LAYER_TOGGLE(_AL), // Toggle Arrow Layer overlay [2] = ACTION_LAYER_TAP_KEY(_FL, KC_CAPS),// Tap to toggle caps lock and hold to activate function layer [3] = ACTION_LAYER_TOGGLE(_UL), // Toggle Underglow Layer overlay diff --git a/keyboards/whitefox/keymaps/kim-kim/keymap.c b/keyboards/whitefox/keymaps/kim-kim/keymap.c index 1e6149899f..a254067582 100644 --- a/keyboards/whitefox/keymaps/kim-kim/keymap.c +++ b/keyboards/whitefox/keymaps/kim-kim/keymap.c @@ -41,7 +41,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, KC_DEL, \ KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, KC_PGUP,\ KC_LSFT,XXXXXXX,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT, KC_UP, KC_PGDN,\ - KC_LALT,KC_FN0,KC_LGUI, KC_SPC, KC_RGUI,KC_RALT, XXXXXXX, KC_LEFT,KC_DOWN,KC_RGHT \ + KC_LALT,MO(1), KC_LGUI, KC_SPC, KC_RGUI,KC_RALT, XXXXXXX, KC_LEFT,KC_DOWN,KC_RGHT \ ), [1] = LAYOUT( \ _______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,_______,_______,\ @@ -57,8 +57,6 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { #define ACTION_LEDS_GAME 2 const uint16_t fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), - [1] = ACTION_LAYER_MOMENTARY(2), [2] = ACTION_FUNCTION(ACTION_LEDS_ALL), [3] = ACTION_FUNCTION(ACTION_LEDS_GAME), diff --git a/keyboards/whitefox/keymaps/matt3o/keymap.c b/keyboards/whitefox/keymaps/matt3o/keymap.c index 76fb72f8e3..f6987fe1aa 100644 --- a/keyboards/whitefox/keymaps/matt3o/keymap.c +++ b/keyboards/whitefox/keymaps/matt3o/keymap.c @@ -33,9 +33,9 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( \ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS,KC_GRV, KC_MUTE,\ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, KC_DEL, \ - KC_FN0, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, KC_PGUP,\ + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, KC_PGUP,\ KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT, KC_UP, KC_PGDN,\ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_FN1, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,MO(2), KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT \ ), [1] = LAYOUT( \ KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_TRNS,KC_TRNS,\ @@ -58,8 +58,6 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { #define ACTION_LEDS_GAME 2 const uint16_t fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), - [1] = ACTION_LAYER_MOMENTARY(2), [2] = ACTION_FUNCTION(ACTION_LEDS_ALL), [3] = ACTION_FUNCTION(ACTION_LEDS_GAME), diff --git a/keyboards/winkeyless/bface/keymaps/kpeatt/keymap.c b/keyboards/winkeyless/bface/keymaps/kpeatt/keymap.c index 84de7872f4..8d6e4da77c 100644 --- a/keyboards/winkeyless/bface/keymaps/kpeatt/keymap.c +++ b/keyboards/winkeyless/bface/keymaps/kpeatt/keymap.c @@ -73,7 +73,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ______,______,______, ______, ______,______,______,______ ), // */ }; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), -}; diff --git a/keyboards/xd60/keymaps/Jos/keymap.c b/keyboards/xd60/keymaps/Jos/keymap.c index 87dbad159a..f272d6fd18 100644 --- a/keyboards/xd60/keymaps/Jos/keymap.c +++ b/keyboards/xd60/keymaps/Jos/keymap.c @@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ - KC_LSFT, KC_LGUI, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, F(0), \ + KC_LSFT, KC_LGUI, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), \ KC_LCTL, TD(0), KC_LALT, KC_SPC , KC_RALT, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RIGHT), // 1: Function 1 Layers @@ -76,8 +76,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Custom Actions const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Fn1 layer - [1] = ACTION_LAYER_MOMENTARY(2), // to GUI/Fn2 layer [2] = ACTION_LAYER_TOGGLE(3), // to Fn3/Num toggle layer }; diff --git a/keyboards/xd60/keymaps/birkir/keymap.c b/keyboards/xd60/keymaps/birkir/keymap.c index 35b60ae810..52f7086f21 100644 --- a/keyboards/xd60/keymaps/birkir/keymap.c +++ b/keyboards/xd60/keymaps/birkir/keymap.c @@ -9,7 +9,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_SLSH, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_NO, KC_RSFT, KC_UP, TG(2), \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_LEFT, KC_DOWN, KC_RIGHT + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT ), // 1: Function Layer @@ -18,7 +18,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \ KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP,KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_PGDN, KC_RSFT, KC_PGUP, TG(2), \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_HOME, KC_PGDOWN,KC_END + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, MO(1), KC_HOME, KC_PGDOWN,KC_END ), // 2: Cool Layer @@ -27,15 +27,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \ KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP,KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_PGDN, KC_RSFT, KC_PGUP, TG(2), \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_HOME, KC_PGDOWN,KC_END + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, MO(1), KC_HOME, KC_PGDOWN,KC_END ) }; -// Custom Actions -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay -}; - // Macros const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { diff --git a/keyboards/xd60/keymaps/edulpn/keymap.c b/keyboards/xd60/keymaps/edulpn/keymap.c index 4ff00140aa..88032a384b 100644 --- a/keyboards/xd60/keymaps/edulpn/keymap.c +++ b/keyboards/xd60/keymaps/edulpn/keymap.c @@ -9,7 +9,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSHIFT, KC_NO, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, F(0), KC_NO, KC_RGUI, KC_RCTL), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_NO, KC_RGUI, KC_RCTL), // 1: Function Layer LAYOUT_all( @@ -17,15 +17,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_NO, KC_UP, KC_NO, KC_INSERT, KC_HOME, KC_PGUP, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_NO, KC_NO, KC_NO, \ KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT, KC_DEL, KC_END, KC_PGDN, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLD, KC_VOLU, KC_MUTE, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT, KC_NO, KC_NO, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, F(0), KC_NO, KC_RGUI, KC_RCTL), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_NO, KC_RGUI, KC_RCTL), }; -// Custom Actions -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay -}; - // Macros const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { diff --git a/keyboards/xd60/keymaps/edulpn64/keymap.c b/keyboards/xd60/keymaps/edulpn64/keymap.c index 95d80ffb77..d1ad6f1b64 100644 --- a/keyboards/xd60/keymaps/edulpn64/keymap.c +++ b/keyboards/xd60/keymaps/edulpn64/keymap.c @@ -9,7 +9,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, F(0) , KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT), // 1: Function Layer LAYOUT_all( @@ -17,15 +17,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR,KC_SLCK,KC_PAUS, RGB_RMOD,RGB_MOD, RGB_VAD, RGB_VAI, \ KC_CAPS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_INS, KC_HOME,KC_PGUP, RGB_HUD, RGB_HUI, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_END, KC_PGDN, KC_NO, KC_RSFT, KC_UP, KC_DEL, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, F(0), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RIGHT), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RIGHT), }; -// Custom Actions -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay -}; - // Macros const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { diff --git a/keyboards/xd60/keymaps/kmontag42/keymap.c b/keyboards/xd60/keymaps/kmontag42/keymap.c index 719700d66c..e23aef589e 100644 --- a/keyboards/xd60/keymaps/kmontag42/keymap.c +++ b/keyboards/xd60/keymaps/kmontag42/keymap.c @@ -10,7 +10,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_DOT, KC_ENT, \ KC_LSPO, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSPC, KC_RGUI, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, F(0), KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT), // 1: Function Layer LAYOUT_all( @@ -18,15 +18,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_NO, KC_NO, KC_NO, KC_NO, F(0), KC_NO, KC_NO, KC_NO, KC_NO), + KC_NO, KC_NO, KC_NO, KC_NO, MO(1), KC_NO, KC_NO, KC_NO, KC_NO), }; -// Custom Actions -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay -}; - // Macros const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { diff --git a/keyboards/xd60/keymaps/krusli/keymap.c b/keyboards/xd60/keymaps/krusli/keymap.c index b34b4dfbcf..6b4dfdc33f 100644 --- a/keyboards/xd60/keymaps/krusli/keymap.c +++ b/keyboards/xd60/keymaps/krusli/keymap.c @@ -21,11 +21,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______), }; -// Custom Actions -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay -}; - // Macros const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { diff --git a/keyboards/xd60/keymaps/split_bksp_arrows/keymap.c b/keyboards/xd60/keymaps/split_bksp_arrows/keymap.c index f95a4e9e78..005355cd20 100644 --- a/keyboards/xd60/keymaps/split_bksp_arrows/keymap.c +++ b/keyboards/xd60/keymaps/split_bksp_arrows/keymap.c @@ -19,7 +19,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT_all( KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_INS, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - F(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_TRNS, KC_ENT, \ + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_TRNS, KC_ENT, \ KC_LSFT, KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SLSH, KC_UP, KC_DEL, \ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_CAPS, KC_RSFT, KC_LEFT, KC_DOWN, KC_RIGHT), @@ -33,9 +33,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -// Custom Actions -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Function Layer +// Macros +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { register_code(KC_RSFT); } + else { unregister_code(KC_RSFT); } + break; + } + + return MACRO_NONE; }; // Loop diff --git a/keyboards/xd60/keymaps/stanleylai/keymap.c b/keyboards/xd60/keymaps/stanleylai/keymap.c index a0a69c476d..9d7327ee69 100644 --- a/keyboards/xd60/keymaps/stanleylai/keymap.c +++ b/keyboards/xd60/keymaps/stanleylai/keymap.c @@ -7,15 +7,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - F(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, F(1), KC_UP, KC_DEL, \ + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(2), KC_UP, KC_DEL, \ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT), // 1: Function Layer LAYOUT_all( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \ KC_CAPS, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DEL, \ - F(0), KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ENT, \ + MO(1), KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_VOLD, KC_MUTE, KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PGUP, KC_INS, \ KC_LCTL, KC_LALT, KC_LGUI, KC_MPLY, KC_RGUI, KC_RALT, KC_HOME, KC_PGDOWN,KC_END), @@ -24,17 +24,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ KC_NO, RGB_TOG, RGB_MOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ KC_NO, RGB_HUI, RGB_SAI, RGB_VAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_NO, KC_NO, RGB_HUD, RGB_SAD, RGB_VAD,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, F(1), KC_NO, KC_NO, \ + KC_NO, KC_NO, RGB_HUD, RGB_SAD, RGB_VAD,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, MO(2), KC_NO, KC_NO, \ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), }; -// Custom Actions -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Function Layer - [1] = ACTION_LAYER_MOMENTARY(2), // to RGB Layer -}; - // Macros const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { diff --git a/keyboards/xd60/keymaps/supercoffee/keymap.c b/keyboards/xd60/keymaps/supercoffee/keymap.c index d42e611e9c..4bf30398f5 100644 --- a/keyboards/xd60/keymaps/supercoffee/keymap.c +++ b/keyboards/xd60/keymaps/supercoffee/keymap.c @@ -9,7 +9,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSHIFT, KC_NO, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, F(0), KC_RALT, KC_NO, KC_RGUI, KC_RCTL), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_NO, KC_RGUI, KC_RCTL), // 1: Function Layer LAYOUT_all( @@ -17,15 +17,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_NO, KC_UP, KC_END, KC_NO, KC_NO, KC_CALC, KC_PGUP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DEL, \ KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_HOME, KC_PGDN, KC_NO, KC_NO, KC_NO, KC_PGUP, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_NO, KC_DEL, BL_STEP,KC_NO, KC_NO, KC_VOLD, KC_VOLU,KC_MUTE, KC_NO, KC_PGDN, KC_RSFT, KC_NO, KC_NO, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, F(0), KC_RALT, KC_NO, KC_RGUI, KC_RCTL), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_NO, KC_RGUI, KC_RCTL), }; -// Custom Actions -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay -}; - // Macros const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { diff --git a/layouts/community/60_iso/unxmaal/keymap.c b/layouts/community/60_iso/unxmaal/keymap.c index 8f2d55d9be..07fca874e4 100644 --- a/layouts/community/60_iso/unxmaal/keymap.c +++ b/layouts/community/60_iso/unxmaal/keymap.c @@ -108,7 +108,6 @@ enum function_id { }; const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay [1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay [2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer [3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay diff --git a/layouts/community/ergodox/guni/keymap.c b/layouts/community/ergodox/guni/keymap.c index 9a00f0a979..021271c2e1 100644 --- a/layouts/community/ergodox/guni/keymap.c +++ b/layouts/community/ergodox/guni/keymap.c @@ -138,7 +138,6 @@ const uint16_t PROGMEM fn_actions[] = { //[29] = ACTION_LAYER_TOGGLE(4), [29] = ACTION_MODS_TAP_KEY(MOD_RSFT,KC_ESC), [30] = ACTION_LAYER_TAP_KEY(1, KC_QUOT), - [31] = ACTION_LAYER_MOMENTARY(2), //[] = ACTION_LAYER_TAP_KEY(4, KC_S), }; diff --git a/layouts/community/ergodox/ishigoya-jp/keymap.c b/layouts/community/ergodox/ishigoya-jp/keymap.c index 43bc74a0e1..59040cd50c 100644 --- a/layouts/community/ergodox/ishigoya-jp/keymap.c +++ b/layouts/community/ergodox/ishigoya-jp/keymap.c @@ -144,7 +144,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_RCTL, KC_LGUI, KC_LALT,JP_UNDS,KC_LCTL, KC_BTN3, KC_DEL, KC_NO, - KC_SPC,KC_LSFT,F(1), + KC_SPC,KC_LSFT,MO(NUM), // right hand LCTL(KC_Z), KC_NO, LSFT(KC_4), JP_AT, KC_LEFT, KC_UP, KC_RIGHT, KC_PGUP, KC_J, KC_F, KC_U, KC_P, KC_DOWN, LSFT(KC_3), @@ -187,7 +187,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, - M(SHIFT), M(JPFN), F(1), + M(SHIFT), M(JPFN), MO(NUM), // right hand KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(JPFU), M(JPSE), M(JPTSU), M(JPKU), KC_TRNS, KC_TRNS, @@ -415,10 +415,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(NUM) // FN1 - Momentary Layer 6 (Numbers) -}; - const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { diff --git a/layouts/community/ergodox/osx_whiskey_tango_foxtrot_capslock/keymap.c b/layouts/community/ergodox/osx_whiskey_tango_foxtrot_capslock/keymap.c index dcf2dc1d85..729810705b 100644 --- a/layouts/community/ergodox/osx_whiskey_tango_foxtrot_capslock/keymap.c +++ b/layouts/community/ergodox/osx_whiskey_tango_foxtrot_capslock/keymap.c @@ -47,7 +47,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_TAB, M(KC_Q), M(KC_W), M(KC_E), M(KC_R), M(KC_T), KC_LBRC, M(KC_CAPS), M(KC_A), M(KC_S), M(KC_D), M(KC_F), M(KC_G), - KC_LSFT, M(KC_Z), M(KC_X), M(KC_C), M(KC_V), M(KC_B), KC_FN0, + KC_LSFT, M(KC_Z), M(KC_X), M(KC_C), M(KC_V), M(KC_B), MO(SYMB), KC_LCTL, KC_LALT, KC_LGUI, KC_LEFT, KC_RGHT, KC_TRNS, KC_FN1, KC_HOME, @@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GRV, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_RBRC, M(KC_Y), M(KC_U), M(KC_I), M(KC_O), M(KC_P), KC_BSLS, M(KC_H), M(KC_J), M(KC_K), M(KC_L), KC_SCLN, KC_QUOT, - KC_FN0, M(KC_N), M(KC_M), KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + MO(SYMB), M(KC_N), M(KC_M), KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DOWN, KC_UP, KC_RCTL, KC_RGUI, KC_RALT, KC_RALT, KC_RCTL, KC_PGUP, @@ -148,12 +148,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; const uint16_t PROGMEM fn_actions[] = { - ACTION_LAYER_MOMENTARY(SYMB), // FN0 - Momentary Layer 1 (Symbols) - ACTION_LAYER_ON(SYMB,ON_RELEASE), // FN1 - Enable Layer 1 (Symbols) - ACTION_LAYER_ON(MDIA,ON_RELEASE), // FN2 - Enable Layer 2 (Media) - ACTION_LAYER_OFF(SYMB,ON_RELEASE), // FN3 - Disable Layer 1 (Symbols) - ACTION_LAYER_OFF(MDIA,ON_RELEASE), // FN4 - Disable Layer 2 (MMedia) - ACTION_LAYER_MOMENTARY(MDIA) // FN5 - Momentary Layer 2 (Mdia) + [1] = ACTION_LAYER_ON(SYMB,ON_RELEASE), // FN1 - Enable Layer 1 (Symbols) + [2] = ACTION_LAYER_ON(MDIA,ON_RELEASE), // FN2 - Enable Layer 2 (Media) + [3] = ACTION_LAYER_OFF(SYMB,ON_RELEASE), // FN3 - Disable Layer 1 (Symbols) + [4] = ACTION_LAYER_OFF(MDIA,ON_RELEASE), // FN4 - Disable Layer 2 (MMedia) }; -- cgit v1.2.3 From 267a85c885a97219b544a3c706809821c4f28344 Mon Sep 17 00:00:00 2001 From: Konstantin Đorđević Date: Fri, 2 Aug 2019 21:52:53 +0200 Subject: Remove KC_DELT alias in favor of KC_DEL (#6327) * Remove KC_DELT alias in favor of KC_DEL * Add changelog --- docs/ChangeLog/20190830/PR6327.md | 4 ++++ keyboards/adkb96/keymaps/default/keymap.c | 6 +++--- keyboards/atreus/keymaps/classic/keymap.c | 2 +- keyboards/atreus/keymaps/default/keymap.c | 2 +- keyboards/atreus/keymaps/jeremy/keymap.c | 2 +- keyboards/atreus/keymaps/nojjan/keymap.c | 2 +- keyboards/atreus/keymaps/ptillemans/keymap.c | 2 +- keyboards/atreus62/keymaps/default/keymap.c | 2 +- keyboards/atreus62/keymaps/mneme/keymap.c | 2 +- keyboards/bantam44/keymaps/default/keymap.c | 4 ++-- keyboards/dz60/keymaps/marianas/keyDefinitions.h | 2 +- keyboards/dz60/keymaps/marianas/keymap.c | 2 +- keyboards/ergo42/keymaps/biacco-biacco/keymap.c | 6 +++--- keyboards/ergo42/keymaps/biacco-macOS/keymap.c | 4 ++-- keyboards/ergo42/keymaps/biacco-underglow/keymap.c | 4 ++-- keyboards/ergo42/keymaps/biacco-winjp/keymap.c | 4 ++-- keyboards/ergo42/keymaps/biacco/keymap.c | 4 ++-- keyboards/ergo42/keymaps/default-illustrator/keymap.c | 6 +++--- keyboards/ergo42/keymaps/default-underglow/keymap.c | 2 +- keyboards/ergo42/keymaps/default/keymap.c | 2 +- keyboards/ergo42/keymaps/koba/keymap.c | 4 ++-- keyboards/ergo42/keymaps/yshrsmz/keymap.c | 2 +- keyboards/ergodone/keymaps/default/keymap.c | 2 +- keyboards/ergodone/keymaps/eozaki/keymap.c | 2 +- keyboards/ergodox_ez/keymaps/blakedietz/keymap.c | 2 +- keyboards/ergodox_ez/keymaps/default/keymap.c | 2 +- keyboards/ergodox_ez/keymaps/default_osx/keymap.c | 2 +- keyboards/ergodox_ez/keymaps/kou/keymap.c | 2 +- keyboards/ergodox_ez/keymaps/profet_80/keymap.c | 2 +- keyboards/ergodox_ez/keymaps/rgb_layer/keymap.c | 2 +- keyboards/ergodox_ez/keymaps/steno/keymap.c | 2 +- keyboards/ergodox_infinity/keymaps/default/keymap.c | 2 +- keyboards/ergodox_infinity/keymaps/input_club/keymap.c | 2 +- keyboards/ergodox_infinity/keymaps/nordic_ergo/keymap.c | 12 ++++++------ keyboards/ergodox_infinity/keymaps/trulyergonomic/keymap.c | 2 +- keyboards/handwired/dactyl/keymaps/default/keymap.c | 4 ++-- keyboards/handwired/dactyl/keymaps/dvorak/keymap.c | 4 ++-- keyboards/helix/pico/keymaps/biacco/keymap.c | 4 ++-- keyboards/hotdox/keymaps/default/keymap.c | 2 +- keyboards/hotdox/keymaps/eozaki/keymap.c | 2 +- keyboards/kbdfans/kbd67/rev1/keymaps/koba/keymap.c | 2 +- keyboards/kbdfans/kbd67/rev2/keymaps/koba/keymap.c | 2 +- keyboards/keebio/levinson/keymaps/atreus/keymap.c | 2 +- keyboards/planck/keymaps/gabriel/keymap.c | 2 +- keyboards/planck/keymaps/jeremy-dev/keymap.c | 4 ++-- keyboards/planck/keymaps/pete/keymap.c | 4 ++-- keyboards/planck/keymaps/tong92/keymap.c | 6 +++--- keyboards/thevankeyboards/minivan/keymaps/tong92/keymap.c | 6 +++--- layouts/community/ergodox/absenth/keymap.c | 2 +- layouts/community/ergodox/adnw_k_o_y/keymap.c | 2 +- layouts/community/ergodox/albert/keymap.c | 2 +- layouts/community/ergodox/alexjj/keymap.c | 2 +- layouts/community/ergodox/bepo_csa/keymap.c | 6 +++--- layouts/community/ergodox/bryan/keymap.c | 6 +++--- layouts/community/ergodox/coderkun_neo2/keymap.c | 2 +- layouts/community/ergodox/colemak/keymap.c | 2 +- layouts/community/ergodox/colemak_osx_pc_no/keymap.c | 2 +- layouts/community/ergodox/dave/keymap.c | 4 ++-- layouts/community/ergodox/dragon788/keymap.c | 2 +- layouts/community/ergodox/dvorak/keymap.c | 2 +- layouts/community/ergodox/dvorak_intl_squisher/keymap.c | 4 ++-- layouts/community/ergodox/dvorak_programmer_swe/keymap.c | 2 +- layouts/community/ergodox/dvorak_svorak_a5/keymap.c | 2 +- layouts/community/ergodox/emacs_osx_dk/keymap.c | 2 +- layouts/community/ergodox/german-kinergo/keymap.c | 4 ++-- layouts/community/ergodox/german-lukas/keymap.c | 2 +- layouts/community/ergodox/german-manuneo/keymap.c | 4 ++-- layouts/community/ergodox/german-manuneo/keymap.md | 2 +- layouts/community/ergodox/german/keymap.c | 2 +- layouts/community/ergodox/jacobono/keymap.c | 6 +++--- layouts/community/ergodox/jafo/keymap.c | 2 +- layouts/community/ergodox/jgarr/keymap.c | 2 +- layouts/community/ergodox/mpiechotka/keymap.c | 4 ++-- layouts/community/ergodox/msc/keymap.c | 2 +- .../community/ergodox/norwegian_programmer_osx_pc/keymap.c | 2 +- .../ergodox/norwegian_programmer_osx_pc_colemak/keymap.c | 2 +- layouts/community/ergodox/osx_fr/keymap.c | 4 ++-- layouts/community/ergodox/osx_kinesis_pnut/keymap.c | 2 +- layouts/community/ergodox/phoenix/keymap.c | 2 +- layouts/community/ergodox/plover/keymap.c | 4 ++-- layouts/community/ergodox/qwerty_code_friendly/keymap.c | 2 +- layouts/community/ergodox/sneako/keymap.c | 2 +- layouts/community/ergodox/software_neo2/keymap.c | 4 ++-- layouts/community/ergodox/swedish-lindhe/keymap.c | 2 +- layouts/community/ergodox/swedish/keymap.c | 2 +- layouts/community/ergodox/swissgerman/keymap.c | 12 ++++++------ layouts/community/ergodox/tkuichooseyou/keymap.c | 2 +- layouts/community/ergodox/tm2030/keymap.c | 10 +++++----- layouts/community/ergodox/tonyabra_osx/keymap.c | 2 +- layouts/community/ergodox/townk_osx/keymap.c | 2 +- layouts/community/ergodox/twey/keymap.c | 2 +- layouts/community/ergodox/videck/keymap.c | 2 +- layouts/community/ergodox/xyverz/keymap.c | 8 ++++---- layouts/community/ergodox/zweihander-macos/keymap.c | 2 +- quantum/quantum_keycodes.h | 2 -- 95 files changed, 149 insertions(+), 147 deletions(-) create mode 100644 docs/ChangeLog/20190830/PR6327.md (limited to 'keyboards/dz60') diff --git a/docs/ChangeLog/20190830/PR6327.md b/docs/ChangeLog/20190830/PR6327.md new file mode 100644 index 0000000000..233e10e091 --- /dev/null +++ b/docs/ChangeLog/20190830/PR6327.md @@ -0,0 +1,4 @@ +* Remove `KC_DELT` alias in favor of `KC_DEL` + * `KC_DELT` was a redundant, undocumented alias for `KC_DELETE` + * It has been removed and all its uses replaced with the more common `KC_DEL` alias + * Around 90 keymaps (mostly for ErgoDox boards) have been modified as a result diff --git a/keyboards/adkb96/keymaps/default/keymap.c b/keyboards/adkb96/keymaps/default/keymap.c index c8198ab335..a374ffb5e6 100644 --- a/keyboards/adkb96/keymaps/default/keymap.c +++ b/keyboards/adkb96/keymaps/default/keymap.c @@ -4,12 +4,12 @@ extern keymap_config_t keymap_config; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, XXXXXXX,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DELT, + [0] = LAYOUT( + KC_ESC, XXXXXXX,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_ZKHK,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_JYEN,KC_BSPC,KC_BSPC, KC_TAB, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_ENT, KC_ENT, KC_CAPS,KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_BSLS,KC_ENT, KC_ENT, - KC_LSFT,KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RO, KC_UP, KC_RSFT,KC_RSFT, + KC_LSFT,KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RO, KC_UP, KC_RSFT,KC_RSFT, KC_LCTL,KC_LALT,KC_LGUI,KC_MHEN,KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_HENK,KC_KANA,KC_RALT,KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT,XXXXXXX ) }; diff --git a/keyboards/atreus/keymaps/classic/keymap.c b/keyboards/atreus/keymaps/classic/keymap.c index dce9dd96de..3feeb97cfb 100644 --- a/keyboards/atreus/keymaps/classic/keymap.c +++ b/keyboards/atreus/keymaps/classic/keymap.c @@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LW] = LAYOUT( /* [> LOWER <] */ KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10 , - KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , + KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F12 , KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, DF(_QW), KC_TRNS, KC_TRNS, RESET ), diff --git a/keyboards/atreus/keymaps/default/keymap.c b/keyboards/atreus/keymaps/default/keymap.c index bbe4bb51af..95207f5c46 100644 --- a/keyboards/atreus/keymaps/default/keymap.c +++ b/keyboards/atreus/keymaps/default/keymap.c @@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_LW] = LAYOUT( /* [> LOWER <] */ KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10 , - KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , + KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , KC_NO, KC_VOLU, KC_NO, KC_NO, RESET, KC_NO, KC_F1, KC_F2, KC_F3, KC_F12 , KC_NO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS ) }; diff --git a/keyboards/atreus/keymaps/jeremy/keymap.c b/keyboards/atreus/keymaps/jeremy/keymap.c index baf506b974..e875af3cca 100644 --- a/keyboards/atreus/keymaps/jeremy/keymap.c +++ b/keyboards/atreus/keymaps/jeremy/keymap.c @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_DOT, KC_EQL, KC_PLUS ), [CURS] = LAYOUT( - KC_TRNS, KC_BSPC, KC_UP, KC_DELT, KC_PGUP, KC_TRNS, KM_SAVE, KC_TRNS, KM_OPEN, KC_TRNS, + KC_TRNS, KC_BSPC, KC_UP, KC_DEL, KC_PGUP, KC_TRNS, KM_SAVE, KC_TRNS, KM_OPEN, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KM_UNDO, KC_LALT, KC_TRNS, KC_LGUI, KC_TRNS, KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_MPLY, KM_REDO, KM_CLSE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TAB, KM_COPY, KM_CUT, KM_PAST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS diff --git a/keyboards/atreus/keymaps/nojjan/keymap.c b/keyboards/atreus/keymaps/nojjan/keymap.c index d0aa3b279a..a6872f9952 100644 --- a/keyboards/atreus/keymaps/nojjan/keymap.c +++ b/keyboards/atreus/keymaps/nojjan/keymap.c @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_LW] = LAYOUT( /* [> LOWER <] */ KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10 , - KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , + KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , KC_NO, KC_VOLU, KC_NO, KC_NO, RESET, KC_NO, KC_F1, KC_F2, KC_F3, KC_F12 , KC_NO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS ) }; diff --git a/keyboards/atreus/keymaps/ptillemans/keymap.c b/keyboards/atreus/keymaps/ptillemans/keymap.c index 9019e9a8c0..ea4edeca7d 100644 --- a/keyboards/atreus/keymaps/ptillemans/keymap.c +++ b/keyboards/atreus/keymaps/ptillemans/keymap.c @@ -42,7 +42,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_LW] = LAYOUT( /* [> LOWER <] */ KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10 , - KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , + KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , KC_NO, KC_VOLU, KC_NO, KC_NO, RESET, KC_TILD, KC_F1, KC_F2, KC_F3, KC_F12 , KC_NO, KC_VOLD, _______, _______, KC_MNXT, _______, _______, _______, TO(_QW), KC_PSCR, KC_SLCK, KC_MPLY ) diff --git a/keyboards/atreus62/keymaps/default/keymap.c b/keyboards/atreus62/keymaps/default/keymap.c index 06c7ae309e..95beab3767 100644 --- a/keyboards/atreus62/keymaps/default/keymap.c +++ b/keyboards/atreus62/keymaps/default/keymap.c @@ -17,7 +17,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_BSLS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_RBRC , KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT , KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LBRC , - KC_LCTL, KC_LGUI, KC_LALT, KC_GRV, MO(_NAV),KC_BSPC, KC_DELT, KC_ENT, KC_SPC, KC_EQL, KC_MINS, KC_QUOT, KC_ENT, KC_RGUI + KC_LCTL, KC_LGUI, KC_LALT, KC_GRV, MO(_NAV),KC_BSPC, KC_DEL, KC_ENT, KC_SPC, KC_EQL, KC_MINS, KC_QUOT, KC_ENT, KC_RGUI ), [_NAV] = LAYOUT( diff --git a/keyboards/atreus62/keymaps/mneme/keymap.c b/keyboards/atreus62/keymaps/mneme/keymap.c index ba46d405ea..e76751c335 100644 --- a/keyboards/atreus62/keymaps/mneme/keymap.c +++ b/keyboards/atreus62/keymaps/mneme/keymap.c @@ -100,7 +100,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KN_AO, OSM_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KN_OE, KN_AE, OSM_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KN_MINS, OSM_LSFT, - MO(NAV), OSM_LCTL, OSM_LALT, KC_LGUI, MO(SYM), KC_BSPC, KC_DELT, KC_ENT, KC_SPC, MO(SYM), KC_LEAD, KC_LALT, KC_LCTRL, KC_HYP + MO(NAV), OSM_LCTL, OSM_LALT, KC_LGUI, MO(SYM), KC_BSPC, KC_DEL, KC_ENT, KC_SPC, MO(SYM), KC_LEAD, KC_LALT, KC_LCTRL, KC_HYP ), [NAV] = LAYOUT( diff --git a/keyboards/bantam44/keymaps/default/keymap.c b/keyboards/bantam44/keymaps/default/keymap.c index 7f92da08d5..430bdb850b 100644 --- a/keyboards/bantam44/keymaps/default/keymap.c +++ b/keyboards/bantam44/keymaps/default/keymap.c @@ -10,14 +10,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), /* LOWER */ [1] = LAYOUT( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT, \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ KC_TAB, KC_MPRV, KC_MPLY, KC_MNXT, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_ENT, \ KC_CAPS, KC_LSFT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_NO, KC_HOME, KC_PGUP, KC_RSFT, \ KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_SPC, KC_TRNS, KC_END, KC_PGDN, KC_EXLM \ ), /* RAISE */ [2] = LAYOUT( \ - KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT, \ + KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ KC_TAB, KC_MUTE, KC_VOLD, KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_ENT, \ KC_CAPS, KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_UP, KC_RSFT, \ KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_SPC, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT \ diff --git a/keyboards/dz60/keymaps/marianas/keyDefinitions.h b/keyboards/dz60/keymaps/marianas/keyDefinitions.h index d3aac3dcbf..7248c1f535 100644 --- a/keyboards/dz60/keymaps/marianas/keyDefinitions.h +++ b/keyboards/dz60/keymaps/marianas/keyDefinitions.h @@ -12,7 +12,7 @@ #define PGUP KC_PGUP #define PGDN KC_PGDN #define END_ KC_END -#define DELT KC_DELETE +#define DEL KC_DELETE #define UPUP KC_UP #define D_WN KC_DOWN #define LEFT KC_LEFT diff --git a/keyboards/dz60/keymaps/marianas/keymap.c b/keyboards/dz60/keymaps/marianas/keymap.c index f86074b9c2..a0451b5435 100644 --- a/keyboards/dz60/keymaps/marianas/keymap.c +++ b/keyboards/dz60/keymaps/marianas/keymap.c @@ -19,7 +19,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [NAV_CLUSTER]= LAYOUT_60_ansi( _____, PSCR, SCRL, PAUS, NSRT, HOME, PGUP, NMLK, KSSH, STAR, KMIN, ____, ____, ______, - ______, ____, ____, ____, DELT, END_, PGDN, KP_7, KP_8, KP_9, PLUS, ____, ____, _____, + ______, ____, ____, ____, DEL, END_, PGDN, KP_7, KP_8, KP_9, PLUS, ____, ____, _____, _______, ____, ____, ____, ____, UPUP, UPUP, KP_4, KP_5, KP_6, PLUS, ____, ___________, ________, ____, ____, ____, LEFT, D_WN, RGHT, KP_1, KP_2, KP_3, KNTR, _________________, ____, ____, ____, /*-----------------*/KC_KP_0/*-----------------*/, KDOT, KNTR, ____, ____), diff --git a/keyboards/ergo42/keymaps/biacco-biacco/keymap.c b/keyboards/ergo42/keymaps/biacco-biacco/keymap.c index 9eaba22099..7cf40fa9a0 100644 --- a/keyboards/ergo42/keymaps/biacco-biacco/keymap.c +++ b/keyboards/ergo42/keymaps/biacco-biacco/keymap.c @@ -31,7 +31,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, TG(BIAC),LT(SYMB, KC_ESC), RCTL_T(KC_SPC), SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DELT, KC_PSCR, TG(GAME), TG(SYMB), KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, TG(BIAC),LT(SYMB, KC_ESC), RCTL_T(KC_SPC),SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DEL, KC_PSCR, TG(GAME), TG(SYMB), KC_JYEN \ ), /* META @@ -90,7 +90,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DELT, KC_PSCR, _______, _______, KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DEL, KC_PSCR, _______, _______, KC_JYEN \ ), /* BIAC @@ -110,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_SCLN,KC_COMM, KC_DOT, KC_P, KC_Q, KC_RBRC, KC_BSLS, KC_Y, KC_G, KC_D, KC_M, KC_F, KC_LBRC, \ KC_LALT, KC_A, KC_O, KC_E, KC_I, KC_U, S(KC_8), S(KC_9), KC_B, KC_N, KC_T, KC_R, KC_S, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_W, S(KC_RBRC), S(KC_BSLS), KC_H, KC_J, KC_K, KC_L, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, _______, LT(BSYMB, KC_ESC),RCTL_T(KC_SPC),SFT_T(KC_TAB), KC_BSPC, LT(BMETA, KC_ENT),KC_DELT, KC_PSCR, XXXXXXX, XXXXXXX, KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, _______, LT(BSYMB, KC_ESC),RCTL_T(KC_SPC),SFT_T(KC_TAB), KC_BSPC, LT(BMETA, KC_ENT),KC_DEL, KC_PSCR, XXXXXXX, XXXXXXX, KC_JYEN \ ), /* META diff --git a/keyboards/ergo42/keymaps/biacco-macOS/keymap.c b/keyboards/ergo42/keymaps/biacco-macOS/keymap.c index 8299eb7011..bc6a8557e8 100644 --- a/keyboards/ergo42/keymaps/biacco-macOS/keymap.c +++ b/keyboards/ergo42/keymaps/biacco-macOS/keymap.c @@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, LT(SYMB, KC_ESC), GUI_T(KC_SPC), SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DELT, KC_PSCR, TG(GAME), TG(SYMB), KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, LT(SYMB, KC_ESC), GUI_T(KC_SPC), SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DEL, KC_PSCR, TG(GAME), TG(SYMB), KC_JYEN \ ), /* META @@ -82,7 +82,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DELT, KC_PSCR, _______, _______, KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DEL, KC_PSCR, _______, _______, KC_JYEN \ ) }; diff --git a/keyboards/ergo42/keymaps/biacco-underglow/keymap.c b/keyboards/ergo42/keymaps/biacco-underglow/keymap.c index 3449192802..5b7fb7e66c 100644 --- a/keyboards/ergo42/keymaps/biacco-underglow/keymap.c +++ b/keyboards/ergo42/keymaps/biacco-underglow/keymap.c @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, LT(SYMB, KC_ESC), RCTL_T(KC_SPC), SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DELT, KC_PSCR, TG(GAME), TG(RGB), KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, LT(SYMB, KC_ESC), RCTL_T(KC_SPC),SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DEL, KC_PSCR, TG(GAME), TG(RGB), KC_JYEN \ ), /* META @@ -93,7 +93,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DELT, KC_PSCR, _______, _______, KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DEL, KC_PSCR, _______, _______, KC_JYEN \ ), /* RGB diff --git a/keyboards/ergo42/keymaps/biacco-winjp/keymap.c b/keyboards/ergo42/keymaps/biacco-winjp/keymap.c index 5dbca3bfc5..9d8284dbd2 100644 --- a/keyboards/ergo42/keymaps/biacco-winjp/keymap.c +++ b/keyboards/ergo42/keymaps/biacco-winjp/keymap.c @@ -31,7 +31,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, LT(SYMB, KC_ESC), RCTL_T(KC_SPC), SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DELT, KC_PSCR, TG(GAME), TG(SYMB), KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, LT(SYMB, KC_ESC), RCTL_T(KC_SPC),SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DEL, KC_PSCR, TG(GAME), TG(SYMB), KC_JYEN \ ), /* META @@ -88,7 +88,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DELT, KC_PSCR, _______, _______, KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DEL, KC_PSCR, _______, _______, KC_JYEN \ ) }; diff --git a/keyboards/ergo42/keymaps/biacco/keymap.c b/keyboards/ergo42/keymaps/biacco/keymap.c index a6cc610529..12e55b75f1 100644 --- a/keyboards/ergo42/keymaps/biacco/keymap.c +++ b/keyboards/ergo42/keymaps/biacco/keymap.c @@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, LT(SYMB, KC_ESC), RCTL_T(KC_SPC), SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DELT, KC_PSCR, TG(GAME), TG(SYMB), KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, LT(SYMB, KC_ESC), RCTL_T(KC_SPC),SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DEL, KC_PSCR, TG(GAME), TG(SYMB), KC_JYEN \ ), /* META @@ -82,7 +82,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DELT, KC_PSCR, _______, _______, KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DEL, KC_PSCR, _______, _______, KC_JYEN \ ) }; diff --git a/keyboards/ergo42/keymaps/default-illustrator/keymap.c b/keyboards/ergo42/keymaps/default-illustrator/keymap.c index 62af6b2ab1..3c57f7fc93 100644 --- a/keyboards/ergo42/keymaps/default-illustrator/keymap.c +++ b/keyboards/ergo42/keymaps/default-illustrator/keymap.c @@ -26,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, TG(ILLUST), LT(SYMB, KC_ESC), RCTL_T(KC_SPC), SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DELT, KC_PSCR, TG(GAME), TG(ILLUST), KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, TG(ILLUST), LT(SYMB, KC_ESC), RCTL_T(KC_SPC), SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DEL, KC_PSCR, TG(GAME), TG(ILLUST), KC_JYEN \ ), /* META @@ -83,7 +83,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, XXXXXXX, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DELT, KC_PSCR, _______, XXXXXXX, KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, XXXXXXX, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DEL, KC_PSCR, _______, XXXXXXX, KC_JYEN \ ), /* ILLUST @@ -102,7 +102,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_H, KC_G, KC_I, KC_P, LCTL(KC_J), LCTL(KC_BSLS), _______, _______, _______, _______, _______, _______, _______, \ KC_LALT, KC_R, KC_S, KC_A, KC_V, S(KC_W), LCTL(KC_RBRC), _______, _______, _______, _______, _______, _______, _______, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F, _______, _______, _______, _______, _______, _______, _______, \ - KC_LCTRL, KC_LGUI, KC_APP, _______, KC_ESC, KC_RCTL, KC_DELT, _______, _______, _______, _______, XXXXXXX, _______, _______ \ + KC_LCTRL, KC_LGUI, KC_APP, _______, KC_ESC, KC_RCTL, KC_DEL, _______, _______, _______, _______, XXXXXXX, _______, _______ \ ) }; diff --git a/keyboards/ergo42/keymaps/default-underglow/keymap.c b/keyboards/ergo42/keymaps/default-underglow/keymap.c index 212d9138df..d4e8f11087 100644 --- a/keyboards/ergo42/keymaps/default-underglow/keymap.c +++ b/keyboards/ergo42/keymaps/default-underglow/keymap.c @@ -33,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [BASE] = LAYOUT( \ KC_ESC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, \ - KC_DELT, KC_RCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_RBRC, KC_ENT, \ + KC_DEL, KC_RCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_RBRC, KC_ENT, \ MO(RGB), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT, \ KC_LGUI, KC_LCTL, KC_GRV, KC_BSLS, KC_LALT, MO(META), KC_SPC, KC_SPC, KC_QUOT, KC_MINS, KC_EQL, KC_LEFT, KC_DOWN, KC_RGHT \ ), diff --git a/keyboards/ergo42/keymaps/default/keymap.c b/keyboards/ergo42/keymaps/default/keymap.c index f99ec5fb66..7886e307fd 100644 --- a/keyboards/ergo42/keymaps/default/keymap.c +++ b/keyboards/ergo42/keymaps/default/keymap.c @@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [BASE] = LAYOUT( \ KC_ESC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, \ - KC_DELT, KC_RCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_RBRC, KC_ENT, \ + KC_DEL, KC_RCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_RBRC, KC_ENT, \ MO(SYMB), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT, \ KC_LGUI, KC_LCTL, KC_GRV, KC_BSLS, KC_LALT, MO(META), KC_SPC, KC_SPC, KC_QUOT, KC_MINS, KC_EQL, KC_LEFT, KC_DOWN, KC_RGHT \ ), diff --git a/keyboards/ergo42/keymaps/koba/keymap.c b/keyboards/ergo42/keymaps/koba/keymap.c index 9bc504207f..091d7fb9af 100644 --- a/keyboards/ergo42/keymaps/koba/keymap.c +++ b/keyboards/ergo42/keymaps/koba/keymap.c @@ -47,7 +47,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `------------------------------------------------' `------------------------------------------------' */ [_WIN] = LAYOUT( \ - KC_ESC, KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, KC_BSPC, \ + KC_ESC, KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, KC_BSPC, \ KC_TAB, KC_RCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JP_COLN, KC_ENT, \ KC_ZKHK, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT, \ FN, KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, LOWER, KC_SPC, KC_SPC, RAISE, KC_HENK, KC_APP, KC_LEFT, KC_DOWN, KC_RGHT \ @@ -65,7 +65,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `------------------------------------------------' `------------------------------------------------' */ [_MACOS] = LAYOUT( \ - KC_ESC, KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, KC_BSPC, \ + KC_ESC, KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, KC_BSPC, \ KC_TAB, KC_RCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JP_COLN, KC_ENT, \ KC_CAPS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT, \ FN, KC_LCTL, KC_LALT, KC_LGUI, KC_EISU, LOWER, KC_SPC, KC_SPC, RAISE, KC_KNA, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT \ diff --git a/keyboards/ergo42/keymaps/yshrsmz/keymap.c b/keyboards/ergo42/keymaps/yshrsmz/keymap.c index 55fe30e89b..6239876bb1 100644 --- a/keyboards/ergo42/keymaps/yshrsmz/keymap.c +++ b/keyboards/ergo42/keymaps/yshrsmz/keymap.c @@ -95,7 +95,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_RBRC, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, S(KC_8), S(KC_9), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_RBRC), S(KC_BSLS), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DELT, KC_PSCR, _______, _______, KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DEL, KC_PSCR, _______, _______, KC_JYEN \ ) }; diff --git a/keyboards/ergodone/keymaps/default/keymap.c b/keyboards/ergodone/keymaps/default/keymap.c index 28b393a3d8..2fc5344011 100644 --- a/keyboards/ergodone/keymaps/default/keymap.c +++ b/keyboards/ergodone/keymaps/default/keymap.c @@ -39,7 +39,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/keyboards/ergodone/keymaps/eozaki/keymap.c b/keyboards/ergodone/keymaps/eozaki/keymap.c index d29f4b7631..917790124f 100644 --- a/keyboards/ergodone/keymaps/eozaki/keymap.c +++ b/keyboards/ergodone/keymaps/eozaki/keymap.c @@ -41,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, LSFT(KC_GRV), - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_GRV, + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_GRV, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, LT(SYMB, KC_F2), KC_F4, KC_F5, KC_F6, KC_F11, diff --git a/keyboards/ergodox_ez/keymaps/blakedietz/keymap.c b/keyboards/ergodox_ez/keymaps/blakedietz/keymap.c index 8facc6e925..28f45bc3c2 100644 --- a/keyboards/ergodox_ez/keymaps/blakedietz/keymap.c +++ b/keyboards/ergodox_ez/keymaps/blakedietz/keymap.c @@ -52,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(DEV), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(DEV), KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), ALT_T(KC_X), GUI_T(KC_C), KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV), KC_QUOT, LALT(KC_LSFT), KC_LEFT, KC_RGHT, diff --git a/keyboards/ergodox_ez/keymaps/default/keymap.c b/keyboards/ergodox_ez/keymaps/default/keymap.c index fb3d3896bf..4936ab42c3 100644 --- a/keyboards/ergodox_ez/keymaps/default/keymap.c +++ b/keyboards/ergodox_ez/keymaps/default/keymap.c @@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV), KC_QUOT, LALT(KC_LSFT), KC_LEFT, KC_RGHT, diff --git a/keyboards/ergodox_ez/keymaps/default_osx/keymap.c b/keyboards/ergodox_ez/keymaps/default_osx/keymap.c index 6388586de8..3f52528f8b 100644 --- a/keyboards/ergodox_ez/keymaps/default_osx/keymap.c +++ b/keyboards/ergodox_ez/keymaps/default_osx/keymap.c @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/keyboards/ergodox_ez/keymaps/kou/keymap.c b/keyboards/ergodox_ez/keymaps/kou/keymap.c index 98fafe8ce6..5e49dca252 100644 --- a/keyboards/ergodox_ez/keymaps/kou/keymap.c +++ b/keyboards/ergodox_ez/keymaps/kou/keymap.c @@ -47,7 +47,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_DELT, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_DEL, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, LT(NPAD, KC_Z), KC_X, KC_C, KC_V, KC_B, KC_ESC, MO(SYMB), KC_LALT, KC_LGUI, MO(SYMB), KC_SPC, diff --git a/keyboards/ergodox_ez/keymaps/profet_80/keymap.c b/keyboards/ergodox_ez/keymaps/profet_80/keymap.c index 29505b641e..85455fa9d9 100644 --- a/keyboards/ergodox_ez/keymaps/profet_80/keymap.c +++ b/keyboards/ergodox_ez/keymaps/profet_80/keymap.c @@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox_80( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/keyboards/ergodox_ez/keymaps/rgb_layer/keymap.c b/keyboards/ergodox_ez/keymaps/rgb_layer/keymap.c index 384d7d0945..2c90c02a6b 100644 --- a/keyboards/ergodox_ez/keymaps/rgb_layer/keymap.c +++ b/keyboards/ergodox_ez/keymaps/rgb_layer/keymap.c @@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/keyboards/ergodox_ez/keymaps/steno/keymap.c b/keyboards/ergodox_ez/keymaps/steno/keymap.c index 45fc9f8ba9..080d3f6cef 100644 --- a/keyboards/ergodox_ez/keymaps/steno/keymap.c +++ b/keyboards/ergodox_ez/keymaps/steno/keymap.c @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/keyboards/ergodox_infinity/keymaps/default/keymap.c b/keyboards/ergodox_infinity/keymaps/default/keymap.c index 28b393a3d8..2fc5344011 100644 --- a/keyboards/ergodox_infinity/keymaps/default/keymap.c +++ b/keyboards/ergodox_infinity/keymaps/default/keymap.c @@ -39,7 +39,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/keyboards/ergodox_infinity/keymaps/input_club/keymap.c b/keyboards/ergodox_infinity/keymaps/input_club/keymap.c index 064c01c551..2aa74c4195 100644 --- a/keyboards/ergodox_infinity/keymaps/input_club/keymap.c +++ b/keyboards/ergodox_infinity/keymaps/input_club/keymap.c @@ -43,7 +43,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LGUI, KC_GRV, KC_BSLS, KC_LEFT, KC_RGHT, KC_LCTL, KC_LALT, KC_HOME, - KC_BSPC, KC_DELT, KC_END, + KC_BSPC, KC_DEL, KC_END, /* right hand * +-----+-----+-----+-----+-----+-----+-------+ * |LCK-2| 6 | 7 | 8 | 9 | 0 | - | diff --git a/keyboards/ergodox_infinity/keymaps/nordic_ergo/keymap.c b/keyboards/ergodox_infinity/keymaps/nordic_ergo/keymap.c index 156fd2f198..6a66b1d3fd 100644 --- a/keyboards/ergodox_infinity/keymaps/nordic_ergo/keymap.c +++ b/keyboards/ergodox_infinity/keymaps/nordic_ergo/keymap.c @@ -23,7 +23,7 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Basic layer * - * + * * * ,--------------------------------------------------. ,--------------------------------------------------. * | Esc | 1 | 2 | 3 | 4 | 5 | §½ | | PRSC | 6 | 7 | 8 | 9 | 0 | - | @@ -54,7 +54,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTRL, KC_RBRC, KC_NONUS_BSLASH, KC_LALT, KC_LGUI, KC_LEFT, KC_RIGHT, KC_HOME, - KC_SPC,KC_DELT,KC_END, + KC_SPC,KC_DEL, KC_END, // right hand KC_PSCREEN, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, TG(1), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, @@ -68,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 1: Basic layer with functions * - * + * * * ,--------------------------------------------------. ,--------------------------------------------------. * | Esc | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | 0 | - | @@ -240,7 +240,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { break; } return true; -} +} // Runs just one time when the keyboard initializes. void matrix_init_user(void) { @@ -249,7 +249,7 @@ void matrix_init_user(void) { // Runs constantly in the background, in a loop. void matrix_scan_user(void) { - + uint8_t layer = biton32(layer_state); ergodox_board_led_off(); ergodox_right_led_1_off(); @@ -265,5 +265,5 @@ void matrix_scan_user(void) { default: // none break; - } + } }; diff --git a/keyboards/ergodox_infinity/keymaps/trulyergonomic/keymap.c b/keyboards/ergodox_infinity/keymaps/trulyergonomic/keymap.c index 882f2b3c0d..b288bd5577 100644 --- a/keyboards/ergodox_infinity/keymaps/trulyergonomic/keymap.c +++ b/keyboards/ergodox_infinity/keymaps/trulyergonomic/keymap.c @@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LGUI, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_DELT, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_DEL, KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BSPC, KC_LALT, KC_HOME, KC_PGUP, KC_PGDN, KC_END, diff --git a/keyboards/handwired/dactyl/keymaps/default/keymap.c b/keyboards/handwired/dactyl/keymaps/default/keymap.c index 07d9584492..47f5ba96ba 100644 --- a/keyboards/handwired/dactyl/keymaps/default/keymap.c +++ b/keyboards/handwired/dactyl/keymaps/default/keymap.c @@ -34,8 +34,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [BASE] = LAYOUT_dactyl( // layer 0 : default // left hand - KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, LT(SYMB,KC_GRV), KC_QUOT, LALT(KC_LSFT), KC_LEFT, KC_RGHT, diff --git a/keyboards/handwired/dactyl/keymaps/dvorak/keymap.c b/keyboards/handwired/dactyl/keymaps/dvorak/keymap.c index 7c44f78a65..cc6fc52e5a 100644 --- a/keyboards/handwired/dactyl/keymaps/dvorak/keymap.c +++ b/keyboards/handwired/dactyl/keymaps/dvorak/keymap.c @@ -34,8 +34,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [BASE] = LAYOUT_dactyl( // layer 0 : default // left hand - KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, - KC_DELT, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, + KC_DEL, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, LT(SYMB,KC_GRV), KC_EQL, LALT(KC_LSFT), KC_LEFT, KC_RGHT, diff --git a/keyboards/helix/pico/keymaps/biacco/keymap.c b/keyboards/helix/pico/keymaps/biacco/keymap.c index 36ef4394dd..a1d041c022 100644 --- a/keyboards/helix/pico/keymaps/biacco/keymap.c +++ b/keyboards/helix/pico/keymaps/biacco/keymap.c @@ -52,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO) , \ - KC_LCTL, KC_LGUI, KC_APP, KC_PSCR, LT(SYMB, KC_ESC), RCTL_T(KC_SPC), SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DELT, KC_PSCR, TG(GAME), TG(SYMB), KC_JYEN \ + KC_LCTL, KC_LGUI, KC_APP, KC_PSCR, LT(SYMB, KC_ESC), RCTL_T(KC_SPC), SFT_T(KC_TAB), KC_BSPC, LT(META, KC_ENT), KC_DEL, KC_PSCR, TG(GAME), TG(SYMB), KC_JYEN \ ), /* META @@ -109,7 +109,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, \ KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_RO), \ - KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DELT, KC_PSCR, _______, _______, KC_JYEN \ + KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB, KC_BSPC, KC_ENT, KC_DEL, KC_PSCR, _______, _______, KC_JYEN \ ) }; diff --git a/keyboards/hotdox/keymaps/default/keymap.c b/keyboards/hotdox/keymaps/default/keymap.c index 0ec7b352c1..daba6c3000 100644 --- a/keyboards/hotdox/keymaps/default/keymap.c +++ b/keyboards/hotdox/keymaps/default/keymap.c @@ -37,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/keyboards/hotdox/keymaps/eozaki/keymap.c b/keyboards/hotdox/keymaps/eozaki/keymap.c index dc80e7a34e..3516f20303 100644 --- a/keyboards/hotdox/keymaps/eozaki/keymap.c +++ b/keyboards/hotdox/keymaps/eozaki/keymap.c @@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, LSFT(KC_GRV), - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_GRV, + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_GRV, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, LT(SYMB, KC_F2), KC_F4, KC_F5, KC_F6, KC_F11, diff --git a/keyboards/kbdfans/kbd67/rev1/keymaps/koba/keymap.c b/keyboards/kbdfans/kbd67/rev1/keymaps/koba/keymap.c index b00805e9e7..3ce6afce21 100644 --- a/keyboards/kbdfans/kbd67/rev1/keymaps/koba/keymap.c +++ b/keyboards/kbdfans/kbd67/rev1/keymaps/koba/keymap.c @@ -33,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `------------------------------------------------' `------------' */ [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, JP_CIRC, KC_JYEN, KC_BSPC, KC_DELT, \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, JP_CIRC, KC_JYEN, KC_BSPC, KC_DEL, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, JP_RBRC, KC_PGUP, \ KC_ZKHK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JP_COLN, KC_ENT, KC_PGDN, \ KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PSCR, \ diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/koba/keymap.c b/keyboards/kbdfans/kbd67/rev2/keymaps/koba/keymap.c index b00805e9e7..3ce6afce21 100644 --- a/keyboards/kbdfans/kbd67/rev2/keymaps/koba/keymap.c +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/koba/keymap.c @@ -33,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `------------------------------------------------' `------------' */ [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, JP_CIRC, KC_JYEN, KC_BSPC, KC_DELT, \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, JP_CIRC, KC_JYEN, KC_BSPC, KC_DEL, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, JP_RBRC, KC_PGUP, \ KC_ZKHK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JP_COLN, KC_ENT, KC_PGDN, \ KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PSCR, \ diff --git a/keyboards/keebio/levinson/keymaps/atreus/keymap.c b/keyboards/keebio/levinson/keymaps/atreus/keymap.c index 61ad04ef74..1eb12669ac 100644 --- a/keyboards/keebio/levinson/keymaps/atreus/keymap.c +++ b/keyboards/keebio/levinson/keymaps/atreus/keymap.c @@ -35,7 +35,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_LW] = LAYOUT_ortho_4x12( /* [> LOWER <] */ KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_NO, KC_NO, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10 , - KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_NO, KC_NO, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , + KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_NO, KC_NO, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , KC_NO, KC_VOLU, KC_NO, KC_NO, RESET, KC_NO, KC_NO, KC_NO, KC_F1, KC_F2, KC_F3, KC_F12 , KC_NO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS ) }; diff --git a/keyboards/planck/keymaps/gabriel/keymap.c b/keyboards/planck/keymaps/gabriel/keymap.c index 96e4a17ee6..e0f74804f7 100644 --- a/keyboards/planck/keymaps/gabriel/keymap.c +++ b/keyboards/planck/keymaps/gabriel/keymap.c @@ -81,7 +81,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------' */ [_FN] = { /* FUNCTION */ - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DELT}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END} diff --git a/keyboards/planck/keymaps/jeremy-dev/keymap.c b/keyboards/planck/keymaps/jeremy-dev/keymap.c index 89b7e6b84a..de679a3fc0 100644 --- a/keyboards/planck/keymaps/jeremy-dev/keymap.c +++ b/keyboards/planck/keymaps/jeremy-dev/keymap.c @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P}, {KC_A, KC_S, KC_D, KC_F, KC_G, KC_LPRN, KC_RPRN, KC_H, KC_J, KC_K, KC_L, KC_SCLN}, {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH)}, - {CTL_T(KC_TAB), OSL(FKEY), OSL(NUMS), OSL(SYMB), KC_SPC, ALT_T(KC_BSPC), GUI_T(KC_DELT), KC_ENT, OSL(SYMB), OSL(CURS), TG(CURS), CTL_T(KC_ESC)} + {CTL_T(KC_TAB), OSL(FKEY), OSL(NUMS), OSL(SYMB), KC_SPC, ALT_T(KC_BSPC), GUI_T(KC_DEL), KC_ENT, OSL(SYMB), OSL(CURS), TG(CURS), CTL_T(KC_ESC)} }, [NUMS] = { {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_COMM, KC_7, KC_8, KC_9, KC_SLSH}, @@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_NO, KC_NO, KC_TRNS, TG(NUMS), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_DOT, KC_EQL, KC_PLUS} }, [CURS] = { - {KC_MPLY, KC_BSPC, KC_UP, KC_DELT, KC_PGUP, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_MPLY, KC_BSPC, KC_UP, KC_DEL, KC_PGUP, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, {KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_TRNS, KC_TRNS, KC_NO, KC_LCTL, KC_LALT, KC_LGUI, KC_LSFT}, {KC_VOLD, KC_NO, MY_ABVE, MY_TERM, KC_NO, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_LSFT}, {KC_MUTE, KC_NO, MY_BELW, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_NO} diff --git a/keyboards/planck/keymaps/pete/keymap.c b/keyboards/planck/keymaps/pete/keymap.c index 2a9b66c42d..6f8f8579c1 100644 --- a/keyboards/planck/keymaps/pete/keymap.c +++ b/keyboards/planck/keymaps/pete/keymap.c @@ -92,13 +92,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {_______, _______, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______} }, [_MAC] = { /* Mac */ - {CYCLWIN,MACSLEEP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_DELT}, + {CYCLWIN,MACSLEEP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_DEL }, {_______, MICMUTE, KC_MUTE, KC_VOLD, KC_VOLU, MACPRNT,MACPRNT2, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX}, {_______, BL_STEP, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX}, {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_PGDOWN,KC_PGUP,KC_END } }, [_WIN] = { /* Windows */ - {CYCLWIN,WINSLEEP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_DELT}, + {CYCLWIN,WINSLEEP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_DEL }, {_______, MICMUTE, KC_MUTE, KC_VOLD, KC_VOLU, WINPRNT,WINPRNT2, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX}, {_______, BL_STEP, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX}, {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_PGDOWN,KC_PGUP,KC_END } diff --git a/keyboards/planck/keymaps/tong92/keymap.c b/keyboards/planck/keymaps/tong92/keymap.c index d85bd6e882..bdde285690 100644 --- a/keyboards/planck/keymaps/tong92/keymap.c +++ b/keyboards/planck/keymaps/tong92/keymap.c @@ -110,10 +110,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------' */ [_WINDOW_SHORTCUT] ={ -{KC_ESC ,LALT(KC_F4) ,LGUI(KC_UP) ,XXXXXXX ,XXXXXXX ,S(KC_CAPS) ,XXXXXXX,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_DELT}, +{KC_ESC ,LALT(KC_F4) ,LGUI(KC_UP) ,XXXXXXX ,XXXXXXX ,S(KC_CAPS) ,XXXXXXX,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_DEL}, {_______,LGUI(KC_LEFT) ,LGUI(KC_DOWN) ,LGUI(KC_RIGHT) ,XXXXXXX ,LALT(KC_CAPS),KC_CAPS,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX,XXXXXXX}, {_______,LGUI(LSFT(KC_LEFT)),LGUI(LSFT(KC_RIGHT)),XXXXXXX ,XXXXXXX ,LCTL(KC_CAPS),KC_SLCK,KC_HOME,XXXXXXX,KC_END,XXXXXXX,XXXXXXX}, -{KC_TRNS,LGUI(LCTL(KC_LEFT)),LGUI(LCTL(KC_RIGHT)),LGUI(LCTL(KC_F4)),LCTL(LALT(KC_DELT)),LGUI(KC_SPC),LGUI(KC_SPC),XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,BACKLIT} +{KC_TRNS,LGUI(LCTL(KC_LEFT)),LGUI(LCTL(KC_RIGHT)),LGUI(LCTL(KC_F4)),LCTL(LALT(KC_DEL)),LGUI(KC_SPC),LGUI(KC_SPC),XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,BACKLIT} }, /* Mac Shortcut * ,-----------------------------------------------------------------------. @@ -127,7 +127,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------' */ [_MAC_SHORTCUT] ={ -{KC_ESC ,LGUI(KC_UP) ,LGUI(KC_DOWN) ,XXXXXXX,XXXXXXX ,XXXXXXX,XXXXXXX,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_DELT}, +{KC_ESC ,LGUI(KC_UP) ,LGUI(KC_DOWN) ,XXXXXXX,XXXXXXX ,XXXXXXX,XXXXXXX,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_DEL}, {_______,LALT(LSFT(KC_LEFT)),LALT(LSFT(KC_RIGHT)),XXXXXXX,LGUI(LCTL(KC_F)),XXXXXXX,KC_CAPS,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX,XXXXXXX}, {_______,LGUI(LSFT(KC_LEFT)),LGUI(LSFT(KC_RIGHT)),XXXXXXX,XXXXXXX ,XXXXXXX,XXXXXXX,KC_HOME,XXXXXXX,KC_END,XXXXXXX,XXXXXXX}, {KC_TRNS,_______ ,_______ ,MOUSE ,MOUSE ,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,BACKLIT} diff --git a/keyboards/thevankeyboards/minivan/keymaps/tong92/keymap.c b/keyboards/thevankeyboards/minivan/keymaps/tong92/keymap.c index 0c97954494..6f7167cbbe 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/tong92/keymap.c +++ b/keyboards/thevankeyboards/minivan/keymaps/tong92/keymap.c @@ -112,10 +112,10 @@ XXXXXXX,_______,_______, _______,_______, KC_END, KC_LEFT, * `--------------------------------------------------------------------------' */ [_WINDOW_SHORTCUT] = LAYOUT_arrow( -KC_ESC ,LALT(KC_F4) ,LGUI(KC_UP) ,XXXXXXX ,XXXXXXX,S(KC_CAPS) ,XXXXXXX ,KC_PGUP,KC_UP ,KC_PGDN ,KC_PSCR,KC_DELT, +KC_ESC ,LALT(KC_F4) ,LGUI(KC_UP) ,XXXXXXX ,XXXXXXX,S(KC_CAPS) ,XXXXXXX ,KC_PGUP,KC_UP ,KC_PGDN ,KC_PSCR,KC_DEL, _______,LGUI(KC_LEFT) ,LGUI(KC_DOWN) ,LGUI(KC_RIGHT),XXXXXXX,LALT(KC_CAPS) ,KC_CAPS ,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX,XXXXXXX, _______,LGUI(LSFT(KC_LEFT)),LGUI(LSFT(KC_RIGHT)),XXXXXXX ,XXXXXXX,LCTL(KC_CAPS) ,KC_SLCK ,KC_HOME,XXXXXXX,KC_END ,XXXXXXX,KC_RCTL, -_______,LGUI(LCTL(KC_LEFT)),LGUI(LCTL(KC_RIGHT)), LCTL(LALT(KC_DELT)),LGUI(LCTL(KC_F4)), MOUSE ,XXXXXXX ,XXXXXXX,BACKLIT +_______,LGUI(LCTL(KC_LEFT)),LGUI(LCTL(KC_RIGHT)), LCTL(LALT(KC_DEL)) ,LGUI(LCTL(KC_F4)), MOUSE ,XXXXXXX ,XXXXXXX,BACKLIT ), /* Mac Shortcut * ,--------------------------------------------------------------------------. @@ -129,7 +129,7 @@ _______,LGUI(LCTL(KC_LEFT)),LGUI(LCTL(KC_RIGHT)), LCTL(LAL * `--------------------------------------------------------------------------' */ [_MAC_SHORTCUT] = LAYOUT_arrow( -KC_ESC ,LGUI(KC_UP) ,LGUI(KC_DOWN) ,XXXXXXX ,XXXXXXX,XXXXXXX ,XXXXXXX ,KC_PGUP,KC_UP ,KC_PGDN ,KC_PSCR,KC_DELT, +KC_ESC ,LGUI(KC_UP) ,LGUI(KC_DOWN) ,XXXXXXX ,XXXXXXX,XXXXXXX ,XXXXXXX ,KC_PGUP,KC_UP ,KC_PGDN ,KC_PSCR,KC_DEL, _______,LALT(LSFT(KC_LEFT)) ,LALT(LSFT(KC_RIGHT)) ,XXXXXXX,LGUI(LCTL(KC_F)),XXXXXXX ,KC_CAPS ,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX,XXXXXXX, _______,LGUI(LSFT(KC_LEFT)),LGUI(LSFT(KC_RIGHT)),XXXXXXX ,XXXXXXX,XXXXXXX ,XXXXXXX ,KC_HOME,XXXXXXX,KC_END ,XXXXXXX,KC_RCTL, _______,_______,_______, _______,_______, MOUSE ,XXXXXXX ,XXXXXXX,BACKLIT diff --git a/layouts/community/ergodox/absenth/keymap.c b/layouts/community/ergodox/absenth/keymap.c index e4f1ec901a..d84b68f0ef 100644 --- a/layouts/community/ergodox/absenth/keymap.c +++ b/layouts/community/ergodox/absenth/keymap.c @@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, LT(MDIA, KC_A), KC_S, KC_D, KC_F, KC_G, KC_LSPO, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/layouts/community/ergodox/adnw_k_o_y/keymap.c b/layouts/community/ergodox/adnw_k_o_y/keymap.c index 8a0e47026e..59ae2681f3 100644 --- a/layouts/community/ergodox/adnw_k_o_y/keymap.c +++ b/layouts/community/ergodox/adnw_k_o_y/keymap.c @@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, DE_K, DE_DOT, DE_O, DE_COMM,DE_Y, TG(SYMB), + KC_DEL, DE_K, DE_DOT, DE_O, DE_COMM,DE_Y, TG(SYMB), KC_BSPC, DE_H, DE_A, DE_E, DE_I, DE_U, KC_LSFT, CTL_T(DE_X), DE_Q, DE_AE, DE_UE, DE_OE, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/layouts/community/ergodox/albert/keymap.c b/layouts/community/ergodox/albert/keymap.c index c1b47312fe..8b73424d45 100644 --- a/layouts/community/ergodox/albert/keymap.c +++ b/layouts/community/ergodox/albert/keymap.c @@ -92,7 +92,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { CTL_T(KC_SPC), ALT_T(KC_BSPC), LT(KEYW, KC_END), // right hand LSFT(KC_RGHT), KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, - MO(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DELT, + MO(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(NUMB, KC_ENT), MO(EMAC), LT(MOUS, KC_N), LT(CRSR, KC_M), KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, KC_DOWN, KC_MINS, ALT_T(KC_LBRC), CTL_T(KC_RBRC), diff --git a/layouts/community/ergodox/alexjj/keymap.c b/layouts/community/ergodox/alexjj/keymap.c index 5f4f85cd43..64e7c94433 100644 --- a/layouts/community/ergodox/alexjj/keymap.c +++ b/layouts/community/ergodox/alexjj/keymap.c @@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_DOWN,KC_UP, ALL_T(KC_NO),KC_GRV, KC_RCTRL, KC_F2, TT(MDIA), KC_INS, - KC_DELT,TT(SYMB), KC_SPC + KC_DEL,TT(SYMB), KC_SPC ), /* Keymap 1: Symbol Layer * diff --git a/layouts/community/ergodox/bepo_csa/keymap.c b/layouts/community/ergodox/bepo_csa/keymap.c index 8dfb95a337..c6d4f628ff 100644 --- a/layouts/community/ergodox/bepo_csa/keymap.c +++ b/layouts/community/ergodox/bepo_csa/keymap.c @@ -90,7 +90,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Otherwise, it needs KC_* [LR_BASE] = LAYOUT_ergodox( // layer 0 : default // left hand - BP_DLR, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DELT, + BP_DLR, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DEL, KC_TAB, BP_B, BP_ECUT, BP_P, BP_O, BP_EGRV, KC_BSPC, BP_EQL, BP_A, BP_U, BP_I, BP_E, BP_COMM, KC_LSFT, BP_AGRV, BP_Y, BP_X, BP_DOT, BP_K, KC_ENT, @@ -101,7 +101,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_SPC, KC_HOME, KC_PGDN, // right hand - KC_DELT, KC_6, KC_7, KC_8, KC_9, KC_0, BP_W, + KC_DEL, KC_6, KC_7, KC_8, KC_9, KC_0, BP_W, KC_BSPC, BP_DCRC, BP_V, BP_D, BP_L, BP_J, BP_Z, BP_C, BP_T, BP_S, BP_R, BP_N, BP_M, KC_ENT, BP_APOS, BP_Q, BP_G, BP_H, BP_F, KC_RSFT, @@ -342,7 +342,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TG(LR_CSA), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, RESET, KC_TRNS, KC_TRNS, KC_CALC, KC_MAIL, KC_WHOM, - KC_TRNS, KC_APP, S(KC_DELT), LCTL(KC_INS),S(KC_INS), KC_MUTE, KC_VOLD, + KC_TRNS, KC_APP, S(KC_DEL), LCTL(KC_INS),S(KC_INS), KC_MUTE, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/layouts/community/ergodox/bryan/keymap.c b/layouts/community/ergodox/bryan/keymap.c index 5e74c91262..acae77d5fc 100644 --- a/layouts/community/ergodox/bryan/keymap.c +++ b/layouts/community/ergodox/bryan/keymap.c @@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. - * |Ctrl/Esc|PgUp| | App | LGui | + * |Ctrl/Esc|PgUp| | App | LGui | * ,------|------|------| |------+--------+------. * | | | PgDn | | Home | | | * | Space|Backsp|------| |------| Tab |Enter | @@ -41,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, M(2), - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), GUI_T(KC_BSPC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, @@ -54,7 +54,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, TT(SYMB), - + ALT_T(KC_APP), KC_LGUI, KC_HOME, KC_LALT,KC_TAB, KC_ENT diff --git a/layouts/community/ergodox/coderkun_neo2/keymap.c b/layouts/community/ergodox/coderkun_neo2/keymap.c index 0c70dbb5d0..d1fcea9c91 100644 --- a/layouts/community/ergodox/coderkun_neo2/keymap.c +++ b/layouts/community/ergodox/coderkun_neo2/keymap.c @@ -196,7 +196,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [NHL] = LAYOUT_ergodox( // left hand KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_PGUP,KC_BSPC,KC_UP, KC_DELT,KC_PGDN,KC_NO, + KC_NO, KC_PGUP,KC_BSPC,KC_UP, KC_DEL, KC_PGDN,KC_NO, KC_NO, KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_END, KC_NO, KC_ESC, KC_TAB, KC_INS, KC_ENT, KC_UNDO,KC_TRNS, KC_NO, KC_NO, KC_TRNS,KC_NO, KC_TRNS, diff --git a/layouts/community/ergodox/colemak/keymap.c b/layouts/community/ergodox/colemak/keymap.c index 7330eda140..83c77e4a34 100644 --- a/layouts/community/ergodox/colemak/keymap.c +++ b/layouts/community/ergodox/colemak/keymap.c @@ -33,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_F, KC_P, KC_G, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_F, KC_P, KC_G, TG(SYMB), KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/layouts/community/ergodox/colemak_osx_pc_no/keymap.c b/layouts/community/ergodox/colemak_osx_pc_no/keymap.c index 1196770373..189ff5c43d 100644 --- a/layouts/community/ergodox/colemak_osx_pc_no/keymap.c +++ b/layouts/community/ergodox/colemak_osx_pc_no/keymap.c @@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { NO_EQL, KC_K, KC_M, KC_RIGHT, KC_DOWN, KC_UP, NO_UNDS, KC_LEFT, KC_ESC, KC_FN7, KC_HASH, MO(2), KC_INSERT, NO_SLSH, - KC_DELT, + KC_DEL, KC_BSPC,KC_ENT,KC_SPC ), /* Keymap 1: Basic layer MACS (Same as pc, except for cmd/ctrl, which are swapped) diff --git a/layouts/community/ergodox/dave/keymap.c b/layouts/community/ergodox/dave/keymap.c index 4287496479..f47f881425 100644 --- a/layouts/community/ergodox/dave/keymap.c +++ b/layouts/community/ergodox/dave/keymap.c @@ -119,7 +119,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [NAVI] = LAYOUT_ergodox( KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_HOME, KC_UP, KC_END, KC_INS, KC_PGUP, KC_TRNS, - KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_DELT, KC_PGDN, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_DEL, KC_PGDN, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS, @@ -128,7 +128,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // right hand KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_WBAK, KC_DELT, KC_WFWD, KC_TRNS, KC_TRNS, + KC_TRNS, KC_WBAK, KC_DEL, KC_WFWD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/layouts/community/ergodox/dragon788/keymap.c b/layouts/community/ergodox/dragon788/keymap.c index c0c2134774..7377128ecc 100644 --- a/layouts/community/ergodox/dragon788/keymap.c +++ b/layouts/community/ergodox/dragon788/keymap.c @@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TT(SYMB), KC_GRV, KC_QUOT,KC_LEFT, LT(MDIA, KC_RGHT), KC_APP, KC_HOME, KC_END, - KC_BSPC,KC_DELT,KC_LALT, + KC_BSPC,KC_DEL, KC_LALT, // right hand TG(3), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, TG(2), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, diff --git a/layouts/community/ergodox/dvorak/keymap.c b/layouts/community/ergodox/dvorak/keymap.c index b161358c14..4d8483f544 100644 --- a/layouts/community/ergodox/dvorak/keymap.c +++ b/layouts/community/ergodox/dvorak/keymap.c @@ -33,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, TG(1), + KC_DEL, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, TG(1), KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/layouts/community/ergodox/dvorak_intl_squisher/keymap.c b/layouts/community/ergodox/dvorak_intl_squisher/keymap.c index 83cee0d06f..98e288516b 100644 --- a/layouts/community/ergodox/dvorak_intl_squisher/keymap.c +++ b/layouts/community/ergodox/dvorak_intl_squisher/keymap.c @@ -33,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_WBAK, - KC_ESC, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_DELT, + KC_ESC, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_DEL, KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_LALT, KC_LGUI, KC_LEFT,KC_RGHT, @@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TG(2), KC_PSCREEN, KC_PGUP, KC_PGDN,RALT(KC_RSFT), KC_ENT - ), + ), /* Keymap 1: Symbol & Media Layer * * ,--------------------------------------------------. ,--------------------------------------------------. diff --git a/layouts/community/ergodox/dvorak_programmer_swe/keymap.c b/layouts/community/ergodox/dvorak_programmer_swe/keymap.c index 9b8885b70d..bb27f18e80 100644 --- a/layouts/community/ergodox/dvorak_programmer_swe/keymap.c +++ b/layouts/community/ergodox/dvorak_programmer_swe/keymap.c @@ -60,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand MO(DEVL), KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, SE_MINS, KC_COMM, KC_DOT, KC_P, KC_Y, TG(SYMB), + KC_DEL, SE_MINS, KC_COMM, KC_DOT, KC_P, KC_Y, TG(SYMB), KC_LGUI, KC_A, KC_O, KC_E, KC_U, KC_I, KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, TG(MDIA), CTL_T(KC_NO), MO(SYMB), KC_LALT, KC_LEFT,KC_RGHT, diff --git a/layouts/community/ergodox/dvorak_svorak_a5/keymap.c b/layouts/community/ergodox/dvorak_svorak_a5/keymap.c index f558c6c4be..4ca20bd48c 100644 --- a/layouts/community/ergodox/dvorak_svorak_a5/keymap.c +++ b/layouts/community/ergodox/dvorak_svorak_a5/keymap.c @@ -170,7 +170,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, SE_PLUS, KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, SE_AA, KC_H, KC_J, KC_K, KC_L, SE_OSLH, SE_AE, - KC_DELT, KC_N, KC_M, KC_COMM, KC_DOT, SE_MINS, KC_RSFT, + KC_DEL, KC_N, KC_M, KC_COMM, KC_DOT, SE_MINS, KC_RSFT, KC_ALGR, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, KC_HOME, KC_END, KC_PGUP, diff --git a/layouts/community/ergodox/emacs_osx_dk/keymap.c b/layouts/community/ergodox/emacs_osx_dk/keymap.c index 8f4c010afe..c34d9f65b0 100644 --- a/layouts/community/ergodox/emacs_osx_dk/keymap.c +++ b/layouts/community/ergodox/emacs_osx_dk/keymap.c @@ -37,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { CTL_T(KC_BSLS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_RALT, MO(SYMB), KC_LCTRL, KC_LEFT,KC_RGHT,KC_LALT, - KC_DELT,KC_INS, + KC_DEL, KC_INS, KC_HOME, KC_SPC,KC_BSPC,KC_END, // right hand diff --git a/layouts/community/ergodox/german-kinergo/keymap.c b/layouts/community/ergodox/german-kinergo/keymap.c index 7e1e5bf82b..20651df0fb 100644 --- a/layouts/community/ergodox/german-kinergo/keymap.c +++ b/layouts/community/ergodox/german-kinergo/keymap.c @@ -46,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LGUI, DE_CIRC, DE_LESS, KC_LEFT, KC_RIGHT, KC_LCTRL, KC_LALT, KC_HOME, - KC_BSPC,KC_DELT,KC_END, + KC_BSPC,KC_DEL,KC_END, // right hand KC_PSCREEN, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, MO(1), DE_Z, KC_U, KC_I, KC_O, KC_P, DE_UE, @@ -60,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // [BASE] = LAYOUT_ergodox( // layer 0 : default // // left hand // KC_CIRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MPLY, -// KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), +// KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), // KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, // KC_LSFT, DE_Y, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), // LT(SYMB,DE_LESS),CTL_T(DE_HASH), DE_ACUT, DE_MINS, DE_PLUS, diff --git a/layouts/community/ergodox/german-lukas/keymap.c b/layouts/community/ergodox/german-lukas/keymap.c index e0cdf25c6e..373a1e0440 100644 --- a/layouts/community/ergodox/german-lukas/keymap.c +++ b/layouts/community/ergodox/german-lukas/keymap.c @@ -43,7 +43,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LGUI, DE_CIRC, DE_LESS, KC_LEFT, KC_RIGHT, KC_LCTRL, KC_LALT, KC_HOME, - KC_SPC ,KC_DELT,KC_END, + KC_SPC ,KC_DEL,KC_END, // right hand KC_PSCREEN, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, TG(MDIA), DE_Z, KC_U, KC_I, KC_O, KC_P, LT(SHRT,DE_UE), diff --git a/layouts/community/ergodox/german-manuneo/keymap.c b/layouts/community/ergodox/german-manuneo/keymap.c index 9198bf6e30..d1e48e1102 100644 --- a/layouts/community/ergodox/german-manuneo/keymap.c +++ b/layouts/community/ergodox/german-manuneo/keymap.c @@ -121,7 +121,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | |LGUI|LALT|LCTL| !RCTL|RALT|LEFT|DOWN|RGHT| * '------------------------' '------------------------' * .-----------. .-----------. - * |INS |TG(2)| !M(UM)|DELT | + * |INS |TG(2)| !M(UM)|DEL | * .-----+-----+-----! !-----+-----+-----. * ! ! | APP | ! PGUP| ! ! * ! ! !-----! !-----! ! ! @@ -142,7 +142,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /*-*/ DE_S, DE_N, DE_R, DE_T, DE_D, DE_SS, KC_TAB, DE_B, DE_M, DE_COMM, DE_DOT, KC_UP, DE_Y, /*-*/ /*-*/ KC_RCTL, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT, - M(UM), KC_DELT, + M(UM), KC_DEL, KC_PGUP, KC_PGDN, KC_ENTER, KC_SPACE ), diff --git a/layouts/community/ergodox/german-manuneo/keymap.md b/layouts/community/ergodox/german-manuneo/keymap.md index c59f16a00c..3f476ad2a0 100644 --- a/layouts/community/ergodox/german-manuneo/keymap.md +++ b/layouts/community/ergodox/german-manuneo/keymap.md @@ -43,7 +43,7 @@ Tested with python 2.7 and python 3.4 | | |LGUI|LALT|LCTL| !RCTL|RALT|LEFT|DOWN|RGHT| '------------------------' '------------------------' .-----------. .-----------. - |INS |TG(2)| !M(UM)|DELT | + |INS |TG(2)| !M(UM)|DEL | .-----+-----+-----! !-----+-----+-----. ! ! | APP | ! PGUP| ! ! ! ! !-----! !-----! ! ! diff --git a/layouts/community/ergodox/german/keymap.c b/layouts/community/ergodox/german/keymap.c index a379b24ca3..83ead2eb24 100644 --- a/layouts/community/ergodox/german/keymap.c +++ b/layouts/community/ergodox/german/keymap.c @@ -35,7 +35,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_CIRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MPLY, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, DE_Y, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,DE_LESS),CTL_T(DE_HASH), DE_ACUT, DE_MINS, DE_PLUS, diff --git a/layouts/community/ergodox/jacobono/keymap.c b/layouts/community/ergodox/jacobono/keymap.c index 8d80e349ba..62858f8dd0 100644 --- a/layouts/community/ergodox/jacobono/keymap.c +++ b/layouts/community/ergodox/jacobono/keymap.c @@ -44,7 +44,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LGUI(S(KC_SPC)), KC_SPC,KC_ENT,MO(NUMPAD), // right hand - KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT, + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, KC_TRNS, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_TAB, KC_H, KC_N, KC_E, KC_I, KC_O, KC_DEL, LGUI(KC_TAB), KC_K, KC_M, KC_COMM, KC_DOT, CTL_T(KC_SLSH), KC_RSFT, @@ -83,11 +83,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_TRNS, KC_QUOT, LALT(KC_LSFT), KC_LEFT, MO(SYMB), - KC_TAB, KC_DELT, + KC_TAB, KC_DEL, KC_HOME, KC_SPC, KC_LGUI, KC_END, // right hand - KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT, + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN), KC_RCTRL, KC_RALT, KC_N, KC_M, KC_COMM, KC_DOT, CTL_T(KC_SLSH), KC_RSFT, diff --git a/layouts/community/ergodox/jafo/keymap.c b/layouts/community/ergodox/jafo/keymap.c index 08ea16d4bb..4737ab710d 100644 --- a/layouts/community/ergodox/jafo/keymap.c +++ b/layouts/community/ergodox/jafo/keymap.c @@ -37,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_EQL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), GUI_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, TG(MDIA), - LT(SYMB,KC_GRV),KC_QUOT, KC_DELT, KC_LEFT,KC_RGHT, + LT(SYMB,KC_GRV),KC_QUOT, KC_DEL, KC_LEFT,KC_RGHT, CTL_T(KC_ESC), KC_LALT, KC_HOME, KC_SPC,KC_BSPC,KC_END, diff --git a/layouts/community/ergodox/jgarr/keymap.c b/layouts/community/ergodox/jgarr/keymap.c index 37524dfa08..84b573aca2 100644 --- a/layouts/community/ergodox/jgarr/keymap.c +++ b/layouts/community/ergodox/jgarr/keymap.c @@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Otherwise, it needs KC_* [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DELT, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DEL, KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, TG(1), CTL_T(KC_ESC), KC_A, KC_O, KC_E, KC_U, KC_I, KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, ALL_T(KC_NO), diff --git a/layouts/community/ergodox/mpiechotka/keymap.c b/layouts/community/ergodox/mpiechotka/keymap.c index cfd5b195e2..a673d0bd8a 100644 --- a/layouts/community/ergodox/mpiechotka/keymap.c +++ b/layouts/community/ergodox/mpiechotka/keymap.c @@ -48,7 +48,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_F, KC_P, KC_G, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_F, KC_P, KC_G, TG(SYMB), KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_EQL, LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT, KC_RGHT, @@ -92,7 +92,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE_CM] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, CM_Q, CM_W, CM_F, CM_P, CM_G, TG(SYMB), + KC_DEL, CM_Q, CM_W, CM_F, CM_P, CM_G, TG(SYMB), KC_ESC, CM_A, CM_R, CM_S, CM_T, CM_D, KC_LSFT, CM_Z, CM_X, CM_C, CM_V, CM_B, KC_EQL, LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT, KC_RGHT, diff --git a/layouts/community/ergodox/msc/keymap.c b/layouts/community/ergodox/msc/keymap.c index c64c92c9c8..62c2ec7b53 100644 --- a/layouts/community/ergodox/msc/keymap.c +++ b/layouts/community/ergodox/msc/keymap.c @@ -33,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), KC_LGUI,KC_LALT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/layouts/community/ergodox/norwegian_programmer_osx_pc/keymap.c b/layouts/community/ergodox/norwegian_programmer_osx_pc/keymap.c index afadf13ff6..63fea6e1c1 100644 --- a/layouts/community/ergodox/norwegian_programmer_osx_pc/keymap.c +++ b/layouts/community/ergodox/norwegian_programmer_osx_pc/keymap.c @@ -47,7 +47,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { NO_EQL, KC_N, KC_M, KC_RIGHT, KC_DOWN, KC_UP, NO_BSLS, KC_LEFT, NO_UNDS, NO_AMPR, NO_PIPE, OSL(2), KC_INSERT, KC_PERC, - KC_DELT, + KC_DEL, KC_BSPC,KC_ENT,KC_SPC ), /* Keymap 1: Basic layer MACS (Same as pc, except for cmd/ctrl, which are swapped) diff --git a/layouts/community/ergodox/norwegian_programmer_osx_pc_colemak/keymap.c b/layouts/community/ergodox/norwegian_programmer_osx_pc_colemak/keymap.c index 10b7df642b..cb61ce59cb 100644 --- a/layouts/community/ergodox/norwegian_programmer_osx_pc_colemak/keymap.c +++ b/layouts/community/ergodox/norwegian_programmer_osx_pc_colemak/keymap.c @@ -47,7 +47,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { NO_EQL, KC_K, KC_M, KC_RIGHT, KC_DOWN, KC_UP, NO_BSLS, KC_LEFT, NO_UNDS, NO_AMPR, NO_PIPE, OSL(2), KC_INSERT, KC_PERC, - KC_DELT, + KC_DEL, KC_BSPC,KC_ENT,KC_SPC ), /* Keymap 1: Basic layer MAC (Same as pc, except for cmd/ctrl, which are swapped) diff --git a/layouts/community/ergodox/osx_fr/keymap.c b/layouts/community/ergodox/osx_fr/keymap.c index b1876d6a8e..dba9bf32be 100644 --- a/layouts/community/ergodox/osx_fr/keymap.c +++ b/layouts/community/ergodox/osx_fr/keymap.c @@ -35,14 +35,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand FR_MINS, FR_AMP, FR_EACU, FR_QUOT, FR_APOS, FR_LPRN, KC_LEFT, - KC_DELT, FR_A, FR_Z, KC_E, KC_R, KC_T, TG(1), + KC_DEL, FR_A, FR_Z, KC_E, KC_R, KC_T, TG(1), KC_BSPC, FR_Q, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(FR_W), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,FR_UGRV), FR_LESS, LALT(KC_LSFT), KC_LEFT, KC_RGHT, ALT_T(KC_APP), KC_LGUI, KC_HOME, KC_SPC, KC_BSPC, KC_END, - + // right hand KC_RGHT, FR_SECT, FR_EGRV, FR_EXLM, FR_CCED, FR_AGRV, FR_RPRN, TG(1), KC_Y, KC_U, KC_I, KC_O, KC_P, FR_GRV, diff --git a/layouts/community/ergodox/osx_kinesis_pnut/keymap.c b/layouts/community/ergodox/osx_kinesis_pnut/keymap.c index 5b731a1c00..21e383bd26 100644 --- a/layouts/community/ergodox/osx_kinesis_pnut/keymap.c +++ b/layouts/community/ergodox/osx_kinesis_pnut/keymap.c @@ -46,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LALT(KC_LSFT), LT(SYMB,KC_GRV),KC_QUOT,KC_LEFT,KC_RGHT, KC_LGUI, ALT_T(KC_APP), KC_HOME, - KC_BSPC,KC_DELT,KC_END, + KC_BSPC,KC_DEL,KC_END, // right hand KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, TG(1), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, diff --git a/layouts/community/ergodox/phoenix/keymap.c b/layouts/community/ergodox/phoenix/keymap.c index 31a987b356..b9be7e2b89 100644 --- a/layouts/community/ergodox/phoenix/keymap.c +++ b/layouts/community/ergodox/phoenix/keymap.c @@ -41,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_END, KC_SPC,KC_BSPC,KC_LGUI, // right hand - KC_DELT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_DEL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, diff --git a/layouts/community/ergodox/plover/keymap.c b/layouts/community/ergodox/plover/keymap.c index 9f19ab24c4..0ab60ffbb8 100644 --- a/layouts/community/ergodox/plover/keymap.c +++ b/layouts/community/ergodox/plover/keymap.c @@ -39,8 +39,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, ALT_T(KC_APP), KC_HOME, - KC_END, - KC_BSPC,KC_DELT,KC_LALT, + KC_END, + KC_BSPC,KC_DEL,KC_LALT, // right hand KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, TG(3), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, diff --git a/layouts/community/ergodox/qwerty_code_friendly/keymap.c b/layouts/community/ergodox/qwerty_code_friendly/keymap.c index 5f4ed3c19d..f2aa255a4c 100644 --- a/layouts/community/ergodox/qwerty_code_friendly/keymap.c +++ b/layouts/community/ergodox/qwerty_code_friendly/keymap.c @@ -41,7 +41,7 @@ # define CFQ_USER_KEY4 KC_BSPC #endif #if !defined(CFQ_USER_KEY5) -# define CFQ_USER_KEY5 KC_DELT +# define CFQ_USER_KEY5 KC_DEL #endif #if !defined(CFQ_USER_KEY6) # define CFQ_USER_KEY6 KC_CAPS diff --git a/layouts/community/ergodox/sneako/keymap.c b/layouts/community/ergodox/sneako/keymap.c index 5add317e16..313e597d7b 100644 --- a/layouts/community/ergodox/sneako/keymap.c +++ b/layouts/community/ergodox/sneako/keymap.c @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, diff --git a/layouts/community/ergodox/software_neo2/keymap.c b/layouts/community/ergodox/software_neo2/keymap.c index 7ec4f7b838..73e0694ba0 100644 --- a/layouts/community/ergodox/software_neo2/keymap.c +++ b/layouts/community/ergodox/software_neo2/keymap.c @@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Otherwise, it needs KC_* [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand - KC_DELT, NEO_1, NEO_2, NEO_3, NEO_4, NEO_5, KC_MPLY, + KC_DEL, NEO_1, NEO_2, NEO_3, NEO_4, NEO_5, KC_MPLY, KC_TAB, NEO_X, NEO_V, NEO_L, NEO_C, NEO_W, KC_ESC, NEO_L1_L, NEO_U, NEO_I, NEO_A, NEO_E, NEO_O, KC_LSFT, CTL_T(NEO_UE), GUI_T(NEO_OE), ALT_T(NEO_AE), NEO_P, NEO_Z, TG(1), @@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TG(1), NEO_B, NEO_M, NEO_COMM, NEO_DOT, NEO_J, KC_RSFT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, NEO_L2_R, KC_LALT,KC_RGUI, - KC_DELT, + KC_DEL, KC_ESC,KC_ENT, KC_SPC ), /* Keymap 1: Media and mouse keys diff --git a/layouts/community/ergodox/swedish-lindhe/keymap.c b/layouts/community/ergodox/swedish-lindhe/keymap.c index 5dd5c4d87d..1b16c31d4d 100644 --- a/layouts/community/ergodox/swedish-lindhe/keymap.c +++ b/layouts/community/ergodox/swedish-lindhe/keymap.c @@ -62,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_MS_BTN3, KC_6, KC_7, KC_8, KC_9, KC_0, SE_PLUS, TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, SE_AA, KC_H, KC_J, KC_K, KC_L, SE_OSLH, SE_AE, - KC_DELT, KC_N, KC_M, KC_COMM, KC_DOT, SE_MINS, KC_RSFT, + KC_DEL, KC_N, KC_M, KC_COMM, KC_DOT, SE_MINS, KC_RSFT, KC_ALGR, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, KC_HOME, KC_END, KC_PGUP, diff --git a/layouts/community/ergodox/swedish/keymap.c b/layouts/community/ergodox/swedish/keymap.c index d05dc6cc66..454dcc35cc 100644 --- a/layouts/community/ergodox/swedish/keymap.c +++ b/layouts/community/ergodox/swedish/keymap.c @@ -63,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand SE_HALF, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,SE_APOS), SE_ACUT, LALT(KC_LSFT), KC_LEFT, KC_RGHT, diff --git a/layouts/community/ergodox/swissgerman/keymap.c b/layouts/community/ergodox/swissgerman/keymap.c index b32fa4c2a4..8ba9582934 100644 --- a/layouts/community/ergodox/swissgerman/keymap.c +++ b/layouts/community/ergodox/swissgerman/keymap.c @@ -47,15 +47,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Basic layer * * ,--------------------------------------------------. ,--------------------------------------------------. - * | | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | ' | + * | § | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | ' | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Del | Q | W | E | R | T | L1 | | L1 | Z | U | I | O | P | | + * | Del | Q | W | E | R | T | L1 | | L1 | Z | U | I | O | P | ü | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A /L2| S | D | F | G |------| |------| H | J | K | L | / L2| / Cmd | + * | BkSp | A /L2| S | D | F | G |------| |------| H | J | K | L |ö / L2|ä / Cmd | * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| * | LShift |Y/Ctrl|X/Alt | C | V | B | | | | N | M | , |./Alt |-/Ctrl| RShift | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |< / L1| ^ | $ | Left | Right| | Up | Down |AltGr | | ~L1 | + * |< / L1| ^ | $ | Left | Right| | Up | Down |AltGr | ¨ | ~L1 | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. * | App | LGui | | Alt |Ctrl/Esc| @@ -70,7 +70,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), KC_BSPC, LT(MDIA, KC_A),KC_S, KC_D, KC_F, KC_G, KC_LSFT, CTL_T(KC_Z), ALT_T(KC_X), KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_NONUS_BSLASH), KC_EQL, KC_BSLS, KC_LEFT,KC_RGHT, @@ -270,7 +270,7 @@ void send_key(uint16_t keycode) { void go_back_based_on_tag(char* tag) { const int BRACKETS_AND_SLASH_LENGTH = 3; - + for (int i=0; i < strlen(tag) + BRACKETS_AND_SLASH_LENGTH; i++) { send_key(KC_LEFT); } diff --git a/layouts/community/ergodox/tkuichooseyou/keymap.c b/layouts/community/ergodox/tkuichooseyou/keymap.c index 4dbf8be585..9141cd1c74 100644 --- a/layouts/community/ergodox/tkuichooseyou/keymap.c +++ b/layouts/community/ergodox/tkuichooseyou/keymap.c @@ -46,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),KC_QUOT, KC_LGUI, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, TT(SYMB), - KC_DELT, CTL_T(KC_ESC), + KC_DEL, CTL_T(KC_ESC), KC_PGUP, KC_PGDN,KC_TAB, KC_ENT ), diff --git a/layouts/community/ergodox/tm2030/keymap.c b/layouts/community/ergodox/tm2030/keymap.c index 1259a18ff2..3f82800377 100644 --- a/layouts/community/ergodox/tm2030/keymap.c +++ b/layouts/community/ergodox/tm2030/keymap.c @@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Otherwise, it needs KC_* [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DELT, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC, KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ENT, @@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_SPC, KC_LSFT, KC_PGDN, // right hand - KC_DELT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_RBRC, + KC_DEL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_RBRC, KC_BSPC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_H, KC_J, KC_K, KC_L, KC_SCLN, SFT_T(KC_QUOT), KC_ENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_BSLS), @@ -84,7 +84,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Otherwise, it needs KC_* [DVRK] = LAYOUT_ergodox( // layer 0 : default // left hand - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DELT, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DEL, KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_BSPC, KC_LSFT, KC_A, KC_O, KC_E, KC_U, KC_I, KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_ENT, @@ -95,7 +95,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_SPC, KC_LSFT, KC_PGDN, // right hand - KC_DELT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + KC_DEL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, KC_BSPC, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_D, KC_H, KC_T, KC_N, KC_S, SFT_T(KC_MINS), KC_ENT, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_BSLS), @@ -175,7 +175,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_MAIL, KC_WHOM, - KC_TRNS, KC_TRNS, LSFT(KC_DELT),LCTL(KC_INS),LSFT(KC_INS), KC_MUTE, KC_VOLD, + KC_TRNS, KC_TRNS, LSFT(KC_DEL), LCTL(KC_INS),LSFT(KC_INS), KC_MUTE, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/layouts/community/ergodox/tonyabra_osx/keymap.c b/layouts/community/ergodox/tonyabra_osx/keymap.c index 4f174a69de..469c219440 100644 --- a/layouts/community/ergodox/tonyabra_osx/keymap.c +++ b/layouts/community/ergodox/tonyabra_osx/keymap.c @@ -37,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI, TG(SYMB), KC_GRV, KC_LBRC, KC_RBRC,KC_QUOT, - KC_DELT,KC_LALT, + KC_DEL, KC_LALT, KC_HOME, KC_SPC,KC_BSPC,KC_END, // right hand diff --git a/layouts/community/ergodox/townk_osx/keymap.c b/layouts/community/ergodox/townk_osx/keymap.c index a6097d9a3e..e36d71432d 100644 --- a/layouts/community/ergodox/townk_osx/keymap.c +++ b/layouts/community/ergodox/townk_osx/keymap.c @@ -101,7 +101,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_FN1, TG(KEYPAD), KC_LCTRL, KC_LALT, KC_LGUI, M_TESC, M_TPASTE, KC_HOME, - KC_BSPC, KC_DELT, KC_END, + KC_BSPC, KC_DEL, KC_END, //right half KC_POWER, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, MEH_T(KC_F17), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_EQL, diff --git a/layouts/community/ergodox/twey/keymap.c b/layouts/community/ergodox/twey/keymap.c index 0cc98ca77b..dac153f070 100644 --- a/layouts/community/ergodox/twey/keymap.c +++ b/layouts/community/ergodox/twey/keymap.c @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, TG(STEN), - KC_DELT, KC_QUOT, KC_COMM,KC_DOT, KC_P, KC_Y, KC_ESC, + KC_DEL, KC_QUOT, KC_COMM,KC_DOT, KC_P, KC_Y, KC_ESC, KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_TAB, MO(SYMB), KC_NO, KC_GRV, KC_LEFT,KC_RGHT, diff --git a/layouts/community/ergodox/videck/keymap.c b/layouts/community/ergodox/videck/keymap.c index 1229469d71..7058d93447 100644 --- a/layouts/community/ergodox/videck/keymap.c +++ b/layouts/community/ergodox/videck/keymap.c @@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_PGUP, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_PGDN, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_DELT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TD(TD_R), + KC_DEL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TD(TD_R), KC_LBRC, KC_RBRC, KC_EQL, KC_RALT, KC_RCTL, KC_APP, KC_ESC, KC_INS, diff --git a/layouts/community/ergodox/xyverz/keymap.c b/layouts/community/ergodox/xyverz/keymap.c index eeeded47fc..3131c30640 100644 --- a/layouts/community/ergodox/xyverz/keymap.c +++ b/layouts/community/ergodox/xyverz/keymap.c @@ -1,6 +1,6 @@ /* * About this keymap: - * + * * The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner * keys. I've decided to continue using this layout with my ErgoDox. @@ -99,7 +99,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QW] = LAYOUT_ergodox( // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, XXXXXXX, + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, XXXXXXX, KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(_MD), KC_LGUI, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, @@ -138,10 +138,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | End | | PgDn | | | * `--------------------' `--------------------' */ -[_CM] = LAYOUT_ergodox( +[_CM] = LAYOUT_ergodox( // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_F, KC_P, KC_G, XXXXXXX, + KC_DEL, KC_Q, KC_W, KC_F, KC_P, KC_G, XXXXXXX, KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(_MD), KC_LGUI, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, diff --git a/layouts/community/ergodox/zweihander-macos/keymap.c b/layouts/community/ergodox/zweihander-macos/keymap.c index f64808c4d2..93a435efb1 100644 --- a/layouts/community/ergodox/zweihander-macos/keymap.c +++ b/layouts/community/ergodox/zweihander-macos/keymap.c @@ -35,7 +35,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, TG(SYMB), - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, MO(SYMB), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, MO(SYMB), KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI, KC_LCTL, KC_LALT, KC_LGUI,KC_LEFT,KC_RGHT, diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index bb16da4d50..6fe9807988 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -600,8 +600,6 @@ enum quantum_keycodes { #define KC_DOUBLE_QUOTE KC_DQT #define KC_DQUO KC_DQT -#define KC_DELT KC_DELETE // Del key (four letter code) - // Alias for function layers than expand past FN31 #define FUNC(kc) (QK_FUNCTION | (kc)) -- cgit v1.2.3 From 733ec614d89b42f589075a28d6041c0f756e60b4 Mon Sep 17 00:00:00 2001 From: Jonathan Rascher Date: Fri, 30 Aug 2019 19:44:47 -0500 Subject: [Keyboard] Support flashing DZ60 with :flash command (#6624) --- keyboards/dz60/rules.mk | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/rules.mk b/keyboards/dz60/rules.mk index ed683dbfa2..33beea728c 100644 --- a/keyboards/dz60/rules.mk +++ b/keyboards/dz60/rules.mk @@ -36,10 +36,7 @@ F_USB = $(F_CPU) # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +BOOTLOADER=atmel-dfu # Build Options # comment out to disable the options. -- cgit v1.2.3 From 59000f491f83432b320a810630126c0af5baa1d5 Mon Sep 17 00:00:00 2001 From: Brian Lou Date: Thu, 19 Sep 2019 19:38:42 -0400 Subject: [Keymap] Added my personal keymaps for dz60 and TMO50. (#6772) * Added ottodokto keymaps for dz60 and tmo50. * moved placement of keymaps to proper directory * fixed accidental deletion of semicolon for tmo50 map * fix to use short form codes Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> --- keyboards/dz60/keymaps/ottodokto/config.h | 13 +++++++++ keyboards/dz60/keymaps/ottodokto/keymap.c | 44 ++++++++++++++++++++++++++++ keyboards/dz60/keymaps/ottodokto/rules.mk | 1 + keyboards/tmo50/keymaps/ottodokto/config.h | 10 +++++++ keyboards/tmo50/keymaps/ottodokto/keymap.c | 47 ++++++++++++++++++++++++++++++ keyboards/tmo50/keymaps/ottodokto/rules.mk | 1 + 6 files changed, 116 insertions(+) create mode 100644 keyboards/dz60/keymaps/ottodokto/config.h create mode 100644 keyboards/dz60/keymaps/ottodokto/keymap.c create mode 100644 keyboards/dz60/keymaps/ottodokto/rules.mk create mode 100644 keyboards/tmo50/keymaps/ottodokto/config.h create mode 100644 keyboards/tmo50/keymaps/ottodokto/keymap.c create mode 100644 keyboards/tmo50/keymaps/ottodokto/rules.mk (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/keymaps/ottodokto/config.h b/keyboards/dz60/keymaps/ottodokto/config.h new file mode 100644 index 0000000000..331b14f287 --- /dev/null +++ b/keyboards/dz60/keymaps/ottodokto/config.h @@ -0,0 +1,13 @@ +/*---defines-------------------------------------------- */ +#define TAPPING_TOGGLE 2 // toggle on layer on two taps. + +/*---RGB settings-------------------------------------------- */ +#undef RGBLIGHT_HUE_STEP +#undef RGBLIGHT_SAT_STEP +#undef RGBLIGHT_VAL_STEP +#undef RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL + +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 +#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 200 \ No newline at end of file diff --git a/keyboards/dz60/keymaps/ottodokto/keymap.c b/keyboards/dz60/keymaps/ottodokto/keymap.c new file mode 100644 index 0000000000..347c6a0497 --- /dev/null +++ b/keyboards/dz60/keymaps/ottodokto/keymap.c @@ -0,0 +1,44 @@ +/* + Last updated: 3 Aug 2019 + DZ60 Layout by ottodokto + + This layout is a modification of the 60 tsangan hhkb layout, + with an additional layer to update the arrow keys and + */ + +#include QMK_KEYBOARD_H + +/*---Layers-------------------------------------------- */ +#define _base 0 // default, tsangan layout with split backspace +#define _func 1 // media controls and reset buttons + +/*---defines-------------------------------------------- */ +#define KC_CTOG LT(_func, KC_CAPS) +#define KC_TTAP TT(_func) + +#define RGB_STA RGB_M_P // rgb static +#define RGB_BRE RGB_M_B // rgb breathe +#define RGB_RAI RGB_M_R // rgb rainbow +#define RGB_SWI RGB_M_SW // rgb swirl +#define RGB_SNA RGB_M_SN // rgb snake +#define RGB_KNI RGB_M_K // rgb knight +#define RGB_GRA RGB_M_G // rgb gradient + + +/*---Layout-------------------------------------------- */ +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_base] = LAYOUT_60_tsangan_hhkb( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_CTOG, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_TTAP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ), + [_func] = LAYOUT_60_tsangan_hhkb( + RGB_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, RESET, \ + _______, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, RGB_SPI, RGB_HUD, RGB_VAI, RGB_HUI, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, \ + _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, RGB_SPD, RGB_SAD, RGB_VAD, RGB_SAI, KC_BRID, KC_BRIU, _______, \ + _______, RGB_STA, RGB_BRE, RGB_RAI, RGB_SWI, RGB_SNA, RGB_KNI, RGB_GRA, VLK_TOG, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______ + ) +}; \ No newline at end of file diff --git a/keyboards/dz60/keymaps/ottodokto/rules.mk b/keyboards/dz60/keymaps/ottodokto/rules.mk new file mode 100644 index 0000000000..1b0f198d06 --- /dev/null +++ b/keyboards/dz60/keymaps/ottodokto/rules.mk @@ -0,0 +1 @@ +VELOCIKEY_ENABLE = yes diff --git a/keyboards/tmo50/keymaps/ottodokto/config.h b/keyboards/tmo50/keymaps/ottodokto/config.h new file mode 100644 index 0000000000..7dcbc74ef7 --- /dev/null +++ b/keyboards/tmo50/keymaps/ottodokto/config.h @@ -0,0 +1,10 @@ +/*---RGB settings-------------------------------------------- */ +#undef RGBLIGHT_HUE_STEP +#undef RGBLIGHT_SAT_STEP +#undef RGBLIGHT_VAL_STEP +#undef RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL + +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 +#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 200 \ No newline at end of file diff --git a/keyboards/tmo50/keymaps/ottodokto/keymap.c b/keyboards/tmo50/keymaps/ottodokto/keymap.c new file mode 100644 index 0000000000..688395c9d9 --- /dev/null +++ b/keyboards/tmo50/keymaps/ottodokto/keymap.c @@ -0,0 +1,47 @@ +#include QMK_KEYBOARD_H + + +/*---default defines-------------------------------------------- */ +#define LT1_SPC LT(1, KC_SPC) +#define LT2_SPC LT(2, KC_SPC) + + +#define RGB_STA RGB_M_P // rgb static +#define RGB_BRE RGB_M_B // rgb breathe +#define RGB_RAI RGB_M_R // rgb rainbow +#define RGB_SWI RGB_M_SW // rgb swirl +#define RGB_SNA RGB_M_SN // rgb snake9 +#define RGB_KNI RGB_M_K // rgb knight +#define RGB_GRA RGB_M_G // rgb gradient + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // Default layer + [0] = LAYOUT_all( + KC_VOLU, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_VOLD, MT(MOD_LCTL, KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_MUTE, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_RSFT, + KC_MPLY, KC_LGUI, KC_LALT, LT2_SPC, LT1_SPC, KC_RALT, MO(3) + ), + // Numerals layer + [1] = LAYOUT_all( + KC_BRIU, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, + KC_BRID, KC_CAPS, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, + RGB_MOD, _______, _______, _______, _______, _______, KC_0, KC_1, KC_2, KC_3, _______, _______, _______, _______, + RGB_RMOD, _______, _______, _______, _______, _______, _______ + ), + // FN & Navigation layer + [2] = LAYOUT_all( + KC_PGUP, _______, KC_END, KC_UP, KC_HOME, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, _______, _______, _______, + KC_PGDN, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, KC_F5, KC_F6, KC_F7, KC_F8, _______, _______, + KC_PSCR, _______, _______, _______, _______, _______, _______, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + KC_RGUI, _______, _______, _______, _______, _______, _______ + ), + // RGB Control Layer + [3] = LAYOUT_all( + RGB_SPI, RGB_TOG, RGB_HUD, RGB_VAI, RGB_HUI, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + RGB_SPD, _______, RGB_SAD, RGB_VAD, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, RGB_STA, RGB_BRE, RGB_RAI, RGB_SWI, RGB_SNA, RGB_KNI, RGB_GRA, VLK_TOG, _______, _______, _______, EEP_RST, + _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/tmo50/keymaps/ottodokto/rules.mk b/keyboards/tmo50/keymaps/ottodokto/rules.mk new file mode 100644 index 0000000000..43d2ebb17a --- /dev/null +++ b/keyboards/tmo50/keymaps/ottodokto/rules.mk @@ -0,0 +1 @@ +VELOCIKEY_ENABLE = yes # Enable velocikey. -- cgit v1.2.3 From 99f5d6c56d0e3b28ed208acdeae16cea5d563725 Mon Sep 17 00:00:00 2001 From: Konstantin Đorđević Date: Thu, 3 Oct 2019 01:46:27 +0200 Subject: Update personal userspace and keymaps (#6876) * Align bottom row in KBD6X keymap to match LAYOUT macro * Remove TAP_HOLD_CAPS_DELAY override in userspace * Change default USB polling rate to 1000 Hz * Move media controls to nav cluster on Wasdat * Add dz60:konstantin_b keymap --- keyboards/dz60/keymaps/konstantin_b/config.h | 3 ++ keyboards/dz60/keymaps/konstantin_b/keymap.c | 46 ++++++++++++++++++++++ keyboards/dz60/keymaps/konstantin_b/rules.mk | 13 ++++++ .../kbdfans/kbd6x/keymaps/konstantin/keymap.c | 4 +- .../maartenwut/wasdat/keymaps/konstantin/keymap.c | 16 ++++---- users/konstantin/config.h | 7 ++-- users/konstantin/konstantin.h | 1 + 7 files changed, 77 insertions(+), 13 deletions(-) create mode 100644 keyboards/dz60/keymaps/konstantin_b/config.h create mode 100644 keyboards/dz60/keymaps/konstantin_b/keymap.c create mode 100644 keyboards/dz60/keymaps/konstantin_b/rules.mk (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/keymaps/konstantin_b/config.h b/keyboards/dz60/keymaps/konstantin_b/config.h new file mode 100644 index 0000000000..4b511eb848 --- /dev/null +++ b/keyboards/dz60/keymaps/konstantin_b/config.h @@ -0,0 +1,3 @@ +#pragma once + +#define LAYER_FN diff --git a/keyboards/dz60/keymaps/konstantin_b/keymap.c b/keyboards/dz60/keymaps/konstantin_b/keymap.c new file mode 100644 index 0000000000..3718669fa5 --- /dev/null +++ b/keyboards/dz60/keymaps/konstantin_b/keymap.c @@ -0,0 +1,46 @@ +#include QMK_KEYBOARD_H +#include "konstantin.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base layer + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Bspc │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ + * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │RSft /│ ↑ │FnF│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ + * │LCtl│LGui│LAlt│ Space │RAG│RCt│ ← │ ↓ │ → │ + * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ + */ + [L_BASE] = LAYOUT_60_b_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + FN_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSF_SLS, KC_UP, FN_FNLK, + KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, KC_SPC, XXXXXXX, RAL_RGU, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* Fn layer + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │ │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│PSc│Ins│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ + * │ M4 │M2 │M↑ │M1 │M3 │M5 │ │ │ │Stp│Ply│Prv│Nxt│ Del │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │ │M← │M↓ │M→ │MW↑│ │ │ │ │ │ │ │ │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ + * │ │MA0│MA2│MW←│MW→│ │ │App│Vo-│Vo+│ Mute │PgU│ │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ + * │ │DtPR│DtNA│ MW↓ │ │ │Hom│PgD│End│ + * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ + */ + [L_FN] = LAYOUT_60_b_ansi( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_INS, + KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_DEL, + _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP, KC_VOLD, KC_VOLU, KC_MUTE, KC_PGUP, _______, + _______, DST_P_R, DST_N_A, XXXXXXX, KC_WH_D, XXXXXXX, _______, _______, KC_HOME, KC_PGDN, KC_END + ), +}; diff --git a/keyboards/dz60/keymaps/konstantin_b/rules.mk b/keyboards/dz60/keymaps/konstantin_b/rules.mk new file mode 100644 index 0000000000..a6e88d49b5 --- /dev/null +++ b/keyboards/dz60/keymaps/konstantin_b/rules.mk @@ -0,0 +1,13 @@ +BACKLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = no +COMMAND_ENABLE = yes +CONSOLE_ENABLE = yes +EXTRAKEY_ENABLE = yes +MOUSEKEY_ENABLE = yes +NKRO_ENABLE = yes +RGBLIGHT_ENABLE = no +SPACE_CADET_ENABLE = no +TAP_DANCE_ENABLE = yes +UNICODEMAP_ENABLE = no + +USER_NAME = konstantin diff --git a/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c b/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c index 1ca4dadb1b..d002322056 100644 --- a/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c +++ b/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c @@ -126,7 +126,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, _______, _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_BTN3, KC_DEL, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_APP, KC_WH_U, KC_BTN4, KC_BTN5, _______, _______, - XXXXXXX, _______, _______, KC_WH_D, KC_ACL2, _______, XXXXXXX + XXXXXXX, _______, _______, KC_WH_D, KC_ACL2, _______, XXXXXXX ), /* RCtrl layer @@ -147,6 +147,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, TOP, MV_UP, BOTTOM, TAB_PRV, _______, _______, _______, _______, _______, _______, _______, _______, DEL_NXT, _______, MV_LEFT, MV_DOWN, MV_RGHT, TAB_NXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_VAD, RGB_VAI, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, - XXXXXXX, DST_P_R, DST_N_A, _______, _______, _______, XXXXXXX + XXXXXXX, DST_P_R, DST_N_A, _______, _______, _______, XXXXXXX ), }; diff --git a/keyboards/maartenwut/wasdat/keymaps/konstantin/keymap.c b/keyboards/maartenwut/wasdat/keymaps/konstantin/keymap.c index 04355749ab..481c5fd1fa 100644 --- a/keyboards/maartenwut/wasdat/keymaps/konstantin/keymap.c +++ b/keyboards/maartenwut/wasdat/keymaps/konstantin/keymap.c @@ -29,26 +29,26 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Fn layer * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐ - * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ││ │Num│ │ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ││ │Num│Mut│ * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐ - * │ │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ Clear ││ │ │ │ + * │ │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ Clear ││Ply│Stp│Vo+│ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤ - * │ M4 │M2 │M↑ │M1 │M3 │M5 │ │UCM│ │Stp│Ply│Prv│Nxt│ ││ │ │ │ + * │ M4 │M2 │M↑ │M1 │M3 │M5 │ │UCM│ │ │ │ │ │ ││Prv│Nxt│Vo-│ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │└───┴───┴───┘ * │ │M← │M↓ │M→ │MW↑│ │ │ │ │ │ │ │ │ │ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐ - * │ │ │MA0│MA2│MW←│MW→│ │ │App│Vo-│Vo+│Mut│ │ │PgU│ + * │ │ │MA0│MA2│MW←│MW→│ │ │App│ │ │ │ │ │PgU│ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐ * │ │DtPR│DtNA│ MW↓ │ │ │ │ ││Hom│PgD│End│ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘ */ [L_FN] = LAYOUT_tkl_iso( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD, _______, - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, CLEAR, _______, _______, _______, - KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD, KC_MUTE, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, CLEAR, KC_MPLY, KC_MSTP, KC_VOLU, + KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_PGUP, + _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP, _______, _______, _______, _______, KC_PGUP, _______, DST_P_R, DST_N_A, KC_WH_D, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END ), diff --git a/users/konstantin/config.h b/users/konstantin/config.h index d712e79d3f..bc1987c357 100644 --- a/users/konstantin/config.h +++ b/users/konstantin/config.h @@ -20,10 +20,11 @@ #define RGBLIGHT_EFFECT_SNAKE #define PERMISSIVE_HOLD -#define TAPPING_TERM 200 -#define TAPPING_TOGGLE 2 -#define TAP_HOLD_CAPS_DELAY 50 +#define TAPPING_TERM 200 +#define TAPPING_TOGGLE 2 #define UNICODE_CYCLE_PERSIST false #define UNICODE_SELECTED_MODES UC_WINC, UC_WIN, UC_LNX #define UNICODE_KEY_WINC KC_RGUI + +#define USB_POLLING_INTERVAL_MS 1 diff --git a/users/konstantin/konstantin.h b/users/konstantin/konstantin.h index f42d5feaaa..da21058312 100644 --- a/users/konstantin/konstantin.h +++ b/users/konstantin/konstantin.h @@ -46,6 +46,7 @@ #endif #define LCT_CPS LCTL_T(KC_CAPS) +#define RSF_SLS RSFT_T(KC_SLSH) #define IS_LAYER_ON_STATE(state, layer) ( (state) & (1UL << (layer))) #define IS_LAYER_OFF_STATE(state, layer) (~(state) & (1UL << (layer))) -- cgit v1.2.3 From e8b65d01709c2ebdf50c0aa95963d200fa4fa4c6 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sun, 6 Oct 2019 05:09:35 +1100 Subject: Cleanup rules.mk for 32U4 keyboards, A-F (#6804) * Cleanup rules.mk for 32U4 keyboards, A-F * Put back stuff in VIA keymaps --- .../abstract/ellipse/keymaps/default/rules.mk | 0 keyboards/abstract/ellipse/rev1/rules.mk | 51 +- keyboards/acr60/rules.mk | 50 +- keyboards/adkb96/rules.mk | 58 +- keyboards/aeboards/aegis/keymaps/via/rules.mk | 4 +- keyboards/aeboards/aegis/rules.mk | 53 +- keyboards/aeboards/ext65/keymaps/via/rules.mk | 4 +- keyboards/aeboards/ext65/rules.mk | 53 +- keyboards/ai03/lunar/rules.mk | 51 +- keyboards/ai03/orbit/rules.mk | 63 +- keyboards/ai03/quasar/rules.mk | 51 +- keyboards/ai03/soyuz/rules.mk | 51 +- keyboards/akb/eb46/rules.mk | 51 +- keyboards/akb/raine/rules.mk | 51 +- keyboards/al1/rules.mk | 54 +- keyboards/alf/dc60/rules.mk | 54 +- keyboards/alf/x11/rules.mk | 51 +- keyboards/alf/x2/rules.mk | 50 +- keyboards/alpha/keymaps/vderm/alpha_vderm.hex | 1422 -------------------- keyboards/alpha/rules.mk | 46 +- keyboards/alu84/rules.mk | 50 +- keyboards/amj40/rules.mk | 54 +- keyboards/amj60/rules.mk | 54 +- keyboards/amj96/rules.mk | 54 +- keyboards/amjkeyboard/amj66/rules.mk | 41 +- keyboards/amjpad/rules.mk | 54 +- keyboards/angel17/rules.mk | 15 +- keyboards/angel64/rules.mk | 51 +- keyboards/at101_blackheart/rules.mk | 49 +- keyboards/atomic/rules.mk | 52 +- keyboards/atreus/astar/rules.mk | 50 +- keyboards/atreus/teensy2/rules.mk | 50 +- keyboards/atreus62/rules.mk | 47 +- keyboards/baguette/rules.mk | 51 +- keyboards/bantam44/rules.mk | 54 +- keyboards/bigswitch/rules.mk | 49 +- keyboards/blockey/rules.mk | 54 +- keyboards/bm16a/rules.mk | 51 +- keyboards/bm16s/rules.mk | 50 +- keyboards/boardwalk/rules.mk | 50 +- keyboards/bpiphany/sixshooter/rules.mk | 49 +- keyboards/bthlabs/geekpad/rules.mk | 51 +- keyboards/business_card/alpha/rules.mk | 51 +- keyboards/business_card/beta/rules.mk | 51 +- keyboards/business_card/rules.mk | 51 +- keyboards/butterstick/keymaps/default/rules.mk | 0 keyboards/butterstick/rules.mk | 20 +- keyboards/c39/rules.mk | 53 +- keyboards/catch22/rules.mk | 50 +- keyboards/chimera_ergo/rules.mk | 74 +- keyboards/chimera_ls/rules.mk | 73 +- keyboards/chimera_ortho/rules.mk | 64 +- keyboards/choco60/rules.mk | 51 +- keyboards/christmas_tree/keymaps/default/rules.mk | 0 keyboards/christmas_tree/rules.mk | 52 +- keyboards/ckeys/handwire_101/rules.mk | 52 +- keyboards/ckeys/nakey/rules.mk | 54 +- keyboards/ckeys/obelus/rules.mk | 54 +- keyboards/claw44/rules.mk | 60 +- keyboards/clueboard/17/rules.mk | 54 +- keyboards/clueboard/66/rev1/rules.mk | 19 +- keyboards/clueboard/66/rev2/rules.mk | 18 +- keyboards/clueboard/66/rev3/rules.mk | 19 +- keyboards/clueboard/66_hotswap/prototype/rules.mk | 21 +- keyboards/clueboard/card/rules.mk | 16 +- keyboards/cocoa40/keymaps/default/rules.mk | 1 - keyboards/cocoa40/rules.mk | 51 +- keyboards/comet46/rules.mk | 57 +- keyboards/contra/rules.mk | 48 +- keyboards/converter/adb_usb/rules.mk | 59 +- keyboards/converter/hp_46010a/rules.mk | 47 +- keyboards/converter/ibm_5291/rules.mk | 47 +- keyboards/converter/ibm_terminal/rules.mk | 51 +- keyboards/converter/m0110_usb/rules.mk | 58 +- keyboards/converter/numeric_keypad_IIe/rules.mk | 47 +- keyboards/converter/palm_usb/rules.mk | 17 +- keyboards/converter/sun_usb/rules.mk | 17 +- keyboards/converter/usb_usb/rules.mk | 57 +- keyboards/converter/xt_usb/rules.mk | 48 +- keyboards/copenhagen_click/click_pad_v1/rules.mk | 14 +- keyboards/coseyfannitutti/discipad/rules.mk | 7 + keyboards/coseyfannitutti/mullet/rules.mk | 51 +- keyboards/coseyfannitutti/mulletpad/rules.mk | 51 +- keyboards/cospad/rules.mk | 51 +- keyboards/crawlpad/rules.mk | 48 +- keyboards/crkbd/rules.mk | 60 +- keyboards/cu24/rules.mk | 54 +- keyboards/cu75/rules.mk | 51 +- keyboards/daisy/rules.mk | 53 +- keyboards/dc01/arrow/rules.mk | 59 +- keyboards/dc01/left/rules.mk | 59 +- keyboards/dc01/numpad/rules.mk | 59 +- keyboards/dc01/right/rules.mk | 59 +- keyboards/deltasplit75/rules.mk | 56 +- keyboards/dichotomy/rules.mk | 66 +- keyboards/diverge3/rules.mk | 54 +- keyboards/divergetm2/keymaps/default/rules.mk | 0 keyboards/divergetm2/rules.mk | 57 +- keyboards/dk60/rules.mk | 16 +- keyboards/do60/rules.mk | 57 +- keyboards/doro67/multi/rules.mk | 6 +- keyboards/doro67/regular/rules.mk | 5 +- keyboards/doro67/rgb/rules.mk | 56 +- keyboards/dozen0/rules.mk | 51 +- keyboards/dp60/keymaps/via/rules.mk | 3 +- keyboards/dp60/rules.mk | 20 +- keyboards/duck/eagle_viper/v2/rules.mk | 54 +- keyboards/duck/jetfire/rules.mk | 54 +- keyboards/duck/lightsaver/rules.mk | 54 +- keyboards/duck/octagon/v1/rules.mk | 54 +- keyboards/duck/octagon/v2/rules.mk | 54 +- keyboards/dumbpad/rules.mk | 51 +- keyboards/dz60/keymaps/LEdiodes/rules.mk | 45 +- keyboards/dz60/rules.mk | 45 +- keyboards/eco/rules.mk | 47 +- keyboards/emptystring/NQG/rules.mk | 53 +- keyboards/ep/40/rules.mk | 51 +- keyboards/ep/96/rules.mk | 51 +- keyboards/ep/comsn/hs68/rules.mk | 51 +- keyboards/ep/comsn/mollydooker/rules.mk | 51 +- keyboards/ep/comsn/tf_longeboye/rules.mk | 51 +- keyboards/ergo42/rules.mk | 51 +- keyboards/ergodash/rules.mk | 23 +- keyboards/ergodone/rules.mk | 80 +- keyboards/ergodox_ez/rules.mk | 72 +- keyboards/ergoinu/rules.mk | 50 +- keyboards/ergotaco/keymaps/default/rules.mk | 6 - keyboards/ergotaco/rules.mk | 20 +- keyboards/ergotravel/keymaps/default/rules.mk | 0 keyboards/ergotravel/rules.mk | 47 +- keyboards/espectro/rules.mk | 51 +- keyboards/evil80/rules.mk | 52 +- keyboards/exclusive/e65/rules.mk | 7 + keyboards/exclusive/e6_rgb/rules.mk | 54 +- keyboards/exclusive/e6v2/le/rules.mk | 54 +- keyboards/exclusive/e6v2/oe/rules.mk | 54 +- keyboards/exclusive/e7v1/rules.mk | 42 +- keyboards/fc660c/rules.mk | 53 +- keyboards/fc980c/rules.mk | 54 +- keyboards/felix/rules.mk | 40 +- keyboards/fleuron/rules.mk | 54 +- keyboards/fortitude60/rules.mk | 54 +- keyboards/four_banger/rules.mk | 50 +- keyboards/foxlab/leaf60/hotswap/rules.mk | 51 +- keyboards/foxlab/leaf60/universal/rules.mk | 51 +- keyboards/fractal/rules.mk | 46 +- keyboards/freyr/rules.mk | 15 +- 147 files changed, 1019 insertions(+), 6911 deletions(-) delete mode 100644 keyboards/abstract/ellipse/keymaps/default/rules.mk delete mode 100644 keyboards/alpha/keymaps/vderm/alpha_vderm.hex delete mode 100644 keyboards/butterstick/keymaps/default/rules.mk delete mode 100644 keyboards/christmas_tree/keymaps/default/rules.mk delete mode 100644 keyboards/cocoa40/keymaps/default/rules.mk delete mode 100644 keyboards/divergetm2/keymaps/default/rules.mk delete mode 100644 keyboards/ergotravel/keymaps/default/rules.mk (limited to 'keyboards/dz60') diff --git a/keyboards/abstract/ellipse/keymaps/default/rules.mk b/keyboards/abstract/ellipse/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/keyboards/abstract/ellipse/rev1/rules.mk b/keyboards/abstract/ellipse/rev1/rules.mk index 880d40e49b..6c7f5fea32 100644 --- a/keyboards/abstract/ellipse/rev1/rules.mk +++ b/keyboards/abstract/ellipse/rev1/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/acr60/rules.mk b/keyboards/acr60/rules.mk index 9c4082da29..1e6d4bb7cd 100644 --- a/keyboards/acr60/rules.mk +++ b/keyboards/acr60/rules.mk @@ -1,45 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. @@ -53,4 +23,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes \ No newline at end of file +RGBLIGHT_ENABLE = yes diff --git a/keyboards/adkb96/rules.mk b/keyboards/adkb96/rules.mk index 707fafd7ca..cb4ce2dd7b 100644 --- a/keyboards/adkb96/rules.mk +++ b/keyboards/adkb96/rules.mk @@ -1,58 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection - # Teensy halfkay - # Pro Micro caterina - # Atmel DFU atmel-dfu - # LUFA DFU lufa-dfu - # QMK DFU qmk-dfu - # atmega32a bootloadHID +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/aeboards/aegis/keymaps/via/rules.mk b/keyboards/aeboards/aegis/keymaps/via/rules.mk index f072c67198..70258b9ead 100644 --- a/keyboards/aeboards/aegis/keymaps/via/rules.mk +++ b/keyboards/aeboards/aegis/keymaps/via/rules.mk @@ -1,6 +1,6 @@ # project specific files SRC = keyboards/wilba_tech/wt_main.c - + # MCU name MCU = atmega32u4 @@ -65,4 +65,4 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file +DYNAMIC_KEYMAP_ENABLE = yes diff --git a/keyboards/aeboards/aegis/rules.mk b/keyboards/aeboards/aegis/rules.mk index f1c632289c..602da86786 100644 --- a/keyboards/aeboards/aegis/rules.mk +++ b/keyboards/aeboards/aegis/rules.mk @@ -1,50 +1,16 @@ -# project specific files -SRC = keyboards/wilba_tech/wt_main.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -63,3 +29,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +# project specific files +SRC = keyboards/wilba_tech/wt_main.c diff --git a/keyboards/aeboards/ext65/keymaps/via/rules.mk b/keyboards/aeboards/ext65/keymaps/via/rules.mk index f072c67198..70258b9ead 100644 --- a/keyboards/aeboards/ext65/keymaps/via/rules.mk +++ b/keyboards/aeboards/ext65/keymaps/via/rules.mk @@ -1,6 +1,6 @@ # project specific files SRC = keyboards/wilba_tech/wt_main.c - + # MCU name MCU = atmega32u4 @@ -65,4 +65,4 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file +DYNAMIC_KEYMAP_ENABLE = yes diff --git a/keyboards/aeboards/ext65/rules.mk b/keyboards/aeboards/ext65/rules.mk index f1c632289c..bac979ad0c 100644 --- a/keyboards/aeboards/ext65/rules.mk +++ b/keyboards/aeboards/ext65/rules.mk @@ -1,50 +1,16 @@ -# project specific files -SRC = keyboards/wilba_tech/wt_main.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -63,3 +29,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +# project specific files +SRC += keyboards/wilba_tech/wt_main.c diff --git a/keyboards/ai03/lunar/rules.mk b/keyboards/ai03/lunar/rules.mk index 6bb6d9ae9a..dd3d71baa9 100644 --- a/keyboards/ai03/lunar/rules.mk +++ b/keyboards/ai03/lunar/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk index e225ad037c..758a73cd2a 100644 --- a/keyboards/ai03/orbit/rules.mk +++ b/keyboards/ai03/orbit/rules.mk @@ -1,69 +1,16 @@ -SRC += split_util.c \ - split_flags.c \ - serial.c \ - transport.c \ - matrix.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # @@ -88,4 +35,8 @@ USE_I2C = no # I2C for split communication CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c) # SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files - +SRC += split_util.c \ + split_flags.c \ + serial.c \ + transport.c \ + matrix.c diff --git a/keyboards/ai03/quasar/rules.mk b/keyboards/ai03/quasar/rules.mk index afbd1de147..6b67847791 100644 --- a/keyboards/ai03/quasar/rules.mk +++ b/keyboards/ai03/quasar/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/ai03/soyuz/rules.mk b/keyboards/ai03/soyuz/rules.mk index 5df789e581..f092cb35be 100644 --- a/keyboards/ai03/soyuz/rules.mk +++ b/keyboards/ai03/soyuz/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/akb/eb46/rules.mk b/keyboards/akb/eb46/rules.mk index 195c9e5023..5360459cf7 100644 --- a/keyboards/akb/eb46/rules.mk +++ b/keyboards/akb/eb46/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/akb/raine/rules.mk b/keyboards/akb/raine/rules.mk index 195c9e5023..5360459cf7 100644 --- a/keyboards/akb/raine/rules.mk +++ b/keyboards/akb/raine/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/al1/rules.mk b/keyboards/al1/rules.mk index 6ae59c1496..175adfd5d7 100644 --- a/keyboards/al1/rules.mk +++ b/keyboards/al1/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/alf/dc60/rules.mk b/keyboards/alf/dc60/rules.mk index 0e8f52e2b6..8df6c4c7c5 100644 --- a/keyboards/alf/dc60/rules.mk +++ b/keyboards/alf/dc60/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/alf/x11/rules.mk b/keyboards/alf/x11/rules.mk index d19b7c1baa..3439ac47f3 100644 --- a/keyboards/alf/x11/rules.mk +++ b/keyboards/alf/x11/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/alf/x2/rules.mk b/keyboards/alf/x2/rules.mk index 9c4082da29..1e6d4bb7cd 100644 --- a/keyboards/alf/x2/rules.mk +++ b/keyboards/alf/x2/rules.mk @@ -1,45 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. @@ -53,4 +23,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes \ No newline at end of file +RGBLIGHT_ENABLE = yes diff --git a/keyboards/alpha/keymaps/vderm/alpha_vderm.hex b/keyboards/alpha/keymaps/vderm/alpha_vderm.hex deleted file mode 100644 index 7515ad0305..0000000000 --- a/keyboards/alpha/keymaps/vderm/alpha_vderm.hex +++ /dev/null @@ -1,1422 +0,0 @@ -:100000000C949F020C94E6020C94E6020C94E60217 -:100010000C94E6020C94E6020C94E6020C94E602C0 -:100020000C94E6020C94E6020C94E0250C94B226A3 -:100030000C940D1D0C94E6020C94E6020C94E6025E -:100040000C94E6020C94E6020C94E6020C94E60290 -:100050000C94E6020C94751D0C94E6020C94E602D6 -:100060000C94E6020C94E6020C94E6020C94E60270 -:100070000C94E6020C94E6020C94E6020C94E60260 -:100080000C94E6020C94E6020C94E6020C94E60250 -:100090000C94E6020C94E6020C94E6020C94E60240 -:1000A0000C94E6020C94E6020C94E602AE03B00354 -:1000B000BB03B203B403B603B803BA03BD03BF0363 -:1000C000C103CC03C303C503C703C903CB03CE03DA -:1000D000181318134A134A138813A6130C150C157A -:1000E000E8130C158B148B14FC140C150C1505154A -:1000F00098149814981498149814981498149814A0 -:10010000981498149814981498149814981498148F -:10011000A914B714BE14C514CF149D159D15AF15A1 -:10012000AF15A615AF15AF15AF159D159D15AB15E0 -:10013000AF15AF15AB151F2746273E2846273E288B -:100140009227B5273E280C281B2807634236B79B09 -:10015000D8A71A39685618AEBAAB558C1D3CB7CC27 -:100160005763BD6DEDFD753EF6177231BF0000009F -:10017000803F05A84CCDB2D44EB93836A9020C50F8 -:10018000B9918688083CA6AAAA2ABE000000803F32 -:1001900014001A000800150017001C0018000C00BD -:1001A0001200130004001600070009000A000B00EB -:1001B0000D000E000F0028001D611B64064119424E -:1001C00000002C62000005781174107129007F0076 -:1001D000AA00A900AE004A004E004B004D000000EE -:1001E0002B000000000000000000500051005200F1 -:1001F0004F002A00E000E2000100035100002C62E1 -:100200000000E700E600E4001E001F0020002100BF -:1002100022002300240025002600270035000000CE -:100220002D002E0031002F003000330034002A0052 -:10023000E000E2000351010000002C6200003600E3 -:10024000370038003A003B003C003D003E003F00D4 -:10025000400041004200430044004500000000000F -:10026000000000000000000000004C00E000E20080 -:100270000100010000002C620000E700E600E4003D -:1002800000047F3F1F643214643214783C1E1E1435 -:100290000A056801F000B40078005A000000000070 -:1002A0000001010101010101010102020202020239 -:1002B000020202030303030303030304040404040C -:1002C00004050505050506060606060707070708CF -:1002D0000808080909090A0A0A0A0B0B0B0C0C0C7E -:1002E0000D0D0D0E0E0F0F0F101011111112121314 -:1002F000131414151516161717181819191A1A1B8E -:100300001C1C1D1D1E1F1F202021222223242525E9 -:1003100026272728292A2B2B2C2D2E2F2F30313220 -:1003200033343536363738393A3B3C3D3E3F404131 -:10033000424344464748494A4B4C4D4F5051525313 -:10034000555657585A5B5C5E5F60626364666769C6 -:100350006A6C6D6E707173747678797B7C7E808147 -:10036000838486888A8B8D8F91929496989A9B9D90 -:100370009FA1A3A5A7A9ABADAFB1B3B5B7B9BBBD9D -:10038000BFC1C4C6C8CACCCFD1D3D6D8DADCDFE16E -:10039000E4E6E8EBEDF0F2F5F7FAFCFF04033000D9 -:1003A00000000C0361006C00700068006100000038 -:1003B0000C035000790072006F004C000000040331 -:1003C000090409026D00040100A0FA0904000001FB -:1003D00003010100092111010001224000070581EC -:1003E0000308000A090401000103010200092111A8 -:1003F000010001224D000705820308000A090402DA -:10040000000103000000092111010001223600074C -:1004100005830308000A0904030001030000000922 -:100420002111010001223900070584032000011277 -:1004300001100100000008EDFE60600100010203F0 -:100440000105010906A101050719E029E7150025A5 -:1004500001950875018102050819012905950575A1 -:100460000191029501750391010507190029F715FE -:1004700000250195F875018102C005010980A101DF -:1004800085021601002603001A81002A83007510D8 -:1004900095018100C0050C0901A101850316010029 -:1004A000269C021A01002A9C02751095018100C049 -:1004B00005010902A1010901A10005091901290588 -:1004C00015002501950575018102950175038101CE -:1004D0000501093009311581257F950275088106CE -:1004E00009381581257F950175088106050C0A38A4 -:1004F000021581257F950175088106C0C005010997 -:1005000006A101050719E029E715002501950875E1 -:1005100001810295017508810105081901290595D8 -:1005200005750191029501750391010507190029CF -:10053000FF150026FF00950675088100C0001124F4 -:100540001FBECFEFDAE0DEBFCDBF04B603FE27C08B -:100550008091620290916302A0916402B091650261 -:100560008730904BA740B04BD1F4109262021092AA -:100570006302109264021092650214BE84B7877FF2 -:1005800084BF0FB6F894A89580916000886180932D -:100590006000109260000FBEE0E0F8E3099511E002 -:1005A000A0E0B1E0E0E8F8E502C005900D92A234C9 -:1005B000B107D9F722E0A2E4B1E001C01D92A23652 -:1005C000B207E1F70E940B230C943E2C0C94000020 -:1005D0000895089581E0089581E008950C94EC0257 -:1005E0000C9461080C94630808950C94F4020C9424 -:1005F000F50208950E9489150E94F9022FEF84E305 -:100600009CE0215080409040E1F700C0000087E767 -:1006100097E790930108809300080C949B1DFF922C -:100620000F931F93CF93DF938C01FC01C081D18185 -:1006300080919101811113C08281882349F0CE01FC -:100640000E94E61AF82E682FCE010E948F1A04C06D -:10065000CE010E94BA1AF82EBE018F2D04C0CE0121 -:100660000E94E61ABE010E94B305EC01B8010E9487 -:10067000EE02882309F46CC2B801CE010E94120870 -:10068000882309F465C2C93CFCE5DF0741F4F801A1 -:100690008281882309F45CC20E94290A59C2CA3C9B -:1006A0008CE5D80708F013C1C13C9CE5D90761F47B -:1006B000F8018281882309F44BC20E94B71B827221 -:1006C000F1F00E94490C44C2C23CECE5DE07D0F0D8 -:1006D000F8018281C53CFCE5DF0709F4CDC008F0D4 -:1006E000DDC0C33CECE5DE0709F4CCC008F0D0C0A7 -:1006F000882309F42DC20E94B71B827211F30E9455 -:100700003F0C26C2C531FCE5DF0708F07EC0C230D1 -:100710008CE5D80708F452C0F8018281882309F4D7 -:1007200059C00E94141C811102C00E94F31B0E9438 -:10073000311C90E09093540280935302FE01E350E9 -:10074000FC45E231F10530F4EA5AFF4F8091530243 -:100750000C94E32B80915302816027C0826025C0F6 -:10076000846023C0806121C080621FC080641DC07E -:1007700080681BC08460886018C08E7F16C08D7F23 -:1007800014C08B7F12C08F7E10C08F7D0EC08F7BF8 -:100790000CC08F770AC08B7F877F07C087FB22271B -:1007A00020F991E0922790FB87F980935302809182 -:1007B00053020E94351C0E948915CAC1C1159CE5CF -:1007C000D90781F0C130DC45A9F081E08093470171 -:1007D00080934801C801DF91CF911F910F91FF9045 -:1007E0000C94EA02F8018281882309F4B1C10E94C5 -:1007F000FA02AEC1F8018281882309F4A9C180916F -:100800000B02816080930B02A3C1C531FCE5DF07B9 -:1008100039F50E94B71B982FF801828120910D01B4 -:1008200030910E01882379F09A7A81E009F480E012 -:1008300080934201911102C069E201C065E3C901E0 -:100840000E94971C0AC080914201811102C069E296 -:1008500001C065E3C9010E94A21C0E94841B78C1EB -:10086000C03CDC4509F0B1CFF8018281882309F44E -:100870006FC10E94DA0C6CC1882309F469C10E941F -:10088000880B66C1882309F463C10E94510B60C1C3 -:10089000882309F45DC10E94690B5AC1C73C9CE5DD -:1008A000D90731F4882309F453C10E94BD0B50C10C -:1008B000C83CDC4530F4882309F44AC10E94A30BEC -:1008C00047C1882309F444C10E94D80B41C1C13DEE -:1008D000FCE5DF0749F4F8018281882309F438C177 -:1008E00088E10E943C0C34C1C23D8CE5D80708F079 -:1008F00087C0F8018281CD3CFCE5DF07A1F48823A5 -:1009000009F426C10E941B0A663071058105910514 -:1009100040F00E941B0A683071058105910508F4BA -:10092000EECE86E0DECFCE3C9CE5D90730F5CB3C61 -:10093000ECE5DE0729F4882309F40AC181E0D1CF70 -:10094000CC3CDC4530F4882309F402C10E943E0A05 -:10095000FFC0882309F4FCC00E941B0A62307105A5 -:100960008105910540F00E941B0A653071058105E3 -:10097000910508F4C4CE82E0B4CFCF3C9CE5D90702 -:10098000A1F4882309F4E4C00E941B0A6F307105AA -:100990008105910540F00E941B0A643171058105B3 -:1009A000910508F4ACCE8FE09CCFC03DDC45A0F4AF -:1009B000882309F4CDC00E941B0A693071058105A6 -:1009C000910540F00E941B0A6E307105810591056A -:1009D00008F495CE89E085CF882309F4B9C00E9438 -:1009E0001B0A653171058105910540F00E941B0AC3 -:1009F000673171058105910508F481CE85E171CFDC -:100A0000C53DFCE5DF0739F5F8018281882361F0F7 -:100A1000109248010E943F1D90934601809345012A -:100A200080E20E94D51294C08091480181110FC0CC -:100A300080914501909146010E944B1D883C910593 -:100A400030F487E20E94731187E20E946F1280E205 -:100A50000E94DC127DC0C63D8CE5D80708F043C07B -:100A6000F8018281C33DFCE5DF0729F4882309F4FE -:100A70006FC083E236CFC43DDC45A0F4882309F47F -:100A800067C00E941B0A693171058105910540F01C -:100A90000E941B0A623271058105910508F42FCE70 -:100AA00089E11FCF882351F0109247010E943F1D1A -:100AB000909344018093430182E0B3CF809147013A -:100AC00081110FC080914301909144010E944B1D00 -:100AD000883C910530F486E20E94731186E20E9400 -:100AE0006F1282E0B5CFC93DECE5DE0731F4F801C5 -:100AF0008281882369F180E009C0CA3DFCE5DF07F7 -:100B000041F4F8018281882319F182E00E94A72331 -:100B10001FC0C63DDC4509F058CEF8018281811125 -:100B200077CF80914801811192CF809145019091BA -:100B300046010E944B1D883C910508F088CF80E259 -:100B40000E94DC1288E20E94731188E20E946F12F8 -:100B500080E0DF91CF911F910F91FF90089580E089 -:100B600090E0089508952EE1829FC0011124FC01B8 -:100B70002AE0729FE00DF11D1124E60FF11DEE0F2A -:100B8000FF1FE057FE4F859194910895880F991F9C -:100B9000FC01E058FD4F859194910895CF93DF9328 -:100BA0000E94B3050E947207EC018115904508F080 -:100BB00041C0C11580E4D80708F01CC1C83ED1056A -:100BC00010F5C03ED10508F089C1C83AD10578F4C6 -:100BD000C53AD10508F09EC0C130D10509F47EC1E7 -:100BE00008F435C1C430D10508F078C130C1CD3B1F -:100BF000D10508F49AC0C03CD10508F428C1CE0143 -:100C0000805C9109E9C0C11590E2D90758F4C1157B -:100C100021E0D20708F062C1C03FD10508F417C136 -:100C2000D0655CC1C11580E3D80708F0D9C0CE01FA -:100C30009F70D2C0C11595E5D90708F044C0C11511 -:100C400024E5D20708F0EDC0C11582E5D80710F5FC -:100C5000C11591E5D90708F0D0C0CE0174E0969592 -:100C600087957A95E1F7282F23703C2F337081E028 -:100C700090E002C0880F991F3A95E2F79C68922B8A -:100C8000CF70C695C69520E2C29FE0011124C82B03 -:100C9000D92B24C19E01237033278C2F86958695EE -:100CA000C115D34508F0AEC0C1E0D0E002C0CC0F02 -:100CB000DD1F2A95E2F720E2829FC0011124C82B94 -:100CC000D92BDC680BC1C11529E5D20780F4C11509 -:100CD00088E5D80708F0AAC0C11596E5D90708F03D -:100CE000B6C0CF71DD27DC2FCC27D062F7C0CE0194 -:100CF000C1152AE5D20708F49EC09056811590428E -:100D000008F0A5C08D2F8F710E94EE07DD27D062FD -:100D10008F719BC0C53AD10509F49CC0C63AD10574 -:100D200009F09BC0C2E8D0E4D9C0C83AD10509F4A3 -:100D300097C0C93AD10509F496C0CA3AD10509F459 -:100D400095C0CB3AD10509F494C0CC3AD10509F449 -:100D500093C0CB3BD10509F492C0CC3BD10509F43B -:100D600091C0CD3AD10509F490C0C03BD10509F43A -:100D70008FC0CE3AD10509F48EC0CF3AD10509F41F -:100D80008DC0C13BD10509F48CC0C23BD10509F42B -:100D90008BC0C33BD10509F48AC0C43BD10509F41B -:100DA00089C0C53BD10509F488C0C63BD10509F40B -:100DB00087C0C73BD10509F486C0C83BD10509F4FB -:100DC00085C0C93BD10509F484C0CA3BD10509F4EB -:100DD00083C0C0E0D4E482C00E94C605EC017EC09E -:100DE000CE019927D3FF03C0EC01D86C77C0EC018A -:100DF000D06C74C0DF70D06A71C0DC2FCC27C16F9B -:100E0000D06A6CC0C1E0D0E002C0CC0FDD1F2A95D3 -:100E1000E2F720E2829FC0011124C82BD92BDA68A7 -:100E20005DC0DC2FCC27C46FD06A58C0DC2FCC2724 -:100E3000C06FD06A53C024E0969587952A95E1F754 -:100E40008F70CF70C06ED0E0D06AD82B47C0C0E0A2 -:100E5000D0E044C0C1E8D0E441C0C3E8D0E43EC023 -:100E6000C2EED4E43BC0C9EED4E438C0CAEED4E448 -:100E700035C0C5EBD4E432C0C6EBD4E42FC0C3EB1D -:100E8000D4E42CC0C4EBD4E429C0C7EBD4E426C01E -:100E9000CCECD4E423C0CDECD4E420C0C3E8D5E44A -:100EA0001DC0CAE8D5E41AC0C2E9D5E417C0C4E938 -:100EB000D5E414C0C1E2D6E411C0C3E2D6E40EC04A -:100EC000C4E2D6E40BC0C5E2D6E408C0C6E2D6E46C -:100ED00005C0C7E2D6E402C0CAE2D6E4CE01DF9183 -:100EE000CF9108958238910549F1B0F4813391058D -:100EF00009F459C048F48932910509F44FC08A3287 -:100F0000910509F455C008958533910509F441C050 -:100F10008933910599F00895833E910531F138F4B4 -:100F2000803E910591F0823E9105A9F00895863E9C -:100F3000910501F1873E910539F108952091530201 -:100F400020FD3BC021FD39C008958091530280FFF0 -:100F500034C089E341C08091530282FF30C0809148 -:100F6000530284FD2EC083EE37C08091530282FD70 -:100F700026C0F5CF8091530283FF25C08091530294 -:100F800084FD1FC087EE28C08091530283FD1BC0E3 -:100F9000F5CF8091530285FD18C019C0809153028E -:100FA00085FD15C012C08091530286FD12C013C08A -:100FB0008091530286FD0FC00CC080EE0DC082EE02 -:100FC0000BC080E009C086EE07C089E205C085E35A -:100FD00003C08AE201C081E390E00895909153023A -:100FE00092FF0DC0282F2871283019F4877F846064 -:100FF00006C0282F2471243011F48B7F886093FF62 -:101000000DC0282F2871283119F4877E846106C00D -:10101000282F2471243111F48B7E886194FD877E02 -:10102000089508950F931F93CF93FB0122812111FF -:1010300002C0C1E041C08C01C0915601C11125C060 -:1010400086319C45B1F70E94110881E080935601DA -:101050000E943F1D909355018093540110924901C5 -:1010600010924B0110924A0110924D0110924C01C6 -:1010700010924F0110924E011092510110925001A6 -:10108000109253011092520117C080915401909117 -:1010900055010E944B1D8C32914058F690914901A8 -:1010A000E92FF0E0EE0FFF1FE65BFE4F1183008398 -:1010B0009F5F90934901C0E08C2FCF911F910F91BA -:1010C00008950C94E8020C94E902CF93DF93AAE20E -:1010D000B1E04DE251E061E070E08D91E82FE295E2 -:1010E000EF70F0E021A18F70EB0102C0CC0FDD1F8B -:1010F0008A95E2F7CE019C2F9095922391A392A11D -:10110000892B82A34A175B0741F7A0E2B1E04AE2CC -:1011100051E061E070E08D91E82FE295EF70F0E032 -:1011200021A18F70EB0102C0CC0FDD1F8A95E2F781 -:10113000CE019C2F9095922391A392A1892B82A3FB -:101140004A175B0741F710925E0110925D01109201 -:101150005801109257011092600110925F01109295 -:101160005A0110925901109262011092610110927D -:101170005C0110925B01DF91CF910C94F0022F92F1 -:101180003F924F925F926F927F928F929F92AF9217 -:10119000BF92CF92DF92EF92FF920F931F93CF9364 -:1011A000DF932AE2E22E21E0F22EC7E5D1E03DE511 -:1011B000832E31E0932E01E010E066246394BE019B -:1011C000A880B98019821882D7018D917D01E82FFE -:1011D000E295EF70F0E021A18F70A80102C0440FEA -:1011E000551F8A95E2F7CA01242B21A322A1742E50 -:1011F0007094272122A350EA5A95F1F790E2292E04 -:1012000091E0392E20E030E0D1015D901D01452DA7 -:1012100042954F7050E0DA0190964C90C880D9808A -:10122000552D5F70D80102C0AA0FBB1F5A95E2F777 -:10123000AD01442141F4A801022E02C0440F551F04 -:101240000A94E2F702C040E050E04C295D2959833E -:1012500048832F5F3F4F2A303105B1F691A17922A3 -:1012600071A292A1892B82A32296FB018081918198 -:10127000A816B90641F0609263010E943F1D909349 -:101280006501809364018C169D0609F098CF8091CA -:101290006301882311F180916401909165010E949E -:1012A0004B1D0697D0F08091570190915801909373 -:1012B0005E0180935D018091590190915A01909354 -:1012C000600180935F0180915B0190915C0190933C -:1012D000620180936101109263010E94F20281E039 -:1012E000DF91CF911F910F91FF90EF90DF90CF9002 -:1012F000BF90AF909F908F907F906F905F904F9036 -:101300003F902F900895E82FF0E0EE0FFF1FE35A73 -:10131000FE4F8081918108950895EF92FF920F937F -:101320001F93CF93DF93E901662309F44BC0242F69 -:1013300030E0EFEFF0E0E61BF109B901E69F900124 -:10134000E79F300DF69F300D1124232F8B01031BD7 -:1013500011095CE3E52EF12CB7010E94BB2BFB01C8 -:10136000BC01069FC001079F900D169F900D112490 -:10137000B7010E94BB2BE230F105B1F040F4309789 -:1013800079F0319711F5832F242F461B21C0E430CB -:10139000F105A1F068F03597C1F4842F861B18C0C1 -:1013A000832F262F230F14C0862F830FE42F03C013 -:1013B000E42FE61B842F432F2E2F0AC0842F462FA5 -:1013C000430F06C0842F242F03C080E020E040E0BC -:1013D000E42FF0E0E456FD4F4491E22FF0E0E456B4 -:1013E000FD4F9491E82FF0E0E456FD4FE4914983DE -:1013F0009883EA83DF91CF911F910F91FF90EF9037 -:10140000089588E090E00C94FE2BAB01BC0188E0CD -:1014100090E00C941C2CE9E3F2E083E080831092CE -:101420003A028FEF8283838314826081718182818B -:1014300093810C94050A6091390260FF06C066959D -:101440006F7370E080E090E0089560E070E0CB01A1 -:10145000089580913D0290E001968430910514F04A -:1014600083E090E080933D026091390270913A02EE -:1014700080913B0290913C020C94050A80913D02C0 -:1014800090E0019797FF02C080E090E084309105E2 -:1014900014F083E090E080933D02609139027091F6 -:1014A0003A0280913B0290913C020C94050A809193 -:1014B000390280FF06C065E070E08EE392E00C9494 -:1014C0001910EEE3F2E0118210821282339682E06C -:1014D000ED34F807C1F7EFCF9091390290FF0CC0BF -:1014E000EEE3F2E0818360834283339692E0ED3451 -:1014F000F907C1F70C94570A0895CF93DF9300D0F2 -:101500001F92CDB7DEB72091390220FF0AC09E019D -:101510002F5F3F4F0E948D094B8169818A810E9414 -:101520006C0A0F900F900F90DF91CF9108955F920A -:101530006F927F928F929F92AF92BF92CF92DF92E3 -:10154000EF92FF920F931F93CF93DF9300D01F92E0 -:10155000CDB7DEB78C01E62EF42E522E80913902E3 -:1015600080FF89C0982F9E77923061F49E012F5F93 -:101570003F4FC8010E948D094B8169818A810E9479 -:101580006C0A59C0E82FE695EF739EE39E0F9F7398 -:10159000943018F4F0903C024EC09AE39E0F9F7373 -:1015A000993068F4881F8827881F90913A02292F64 -:1015B000220F022F082B97FB112710F93CC087E25E -:1015C0008E0F8F738A30B8F5F0E07997E0FD02C096 -:1015D00021E001C02FEFEE7FEE56FD4F85919491F3 -:1015E00065E070E00E94BB2B26034001279F900C12 -:1015F0001124580188E9A81A8EEFB80A8EE3C82E84 -:1016000082E0D82E98E6692E77247394C501B30141 -:101610000E94BB2B96014F2D6E2D0E948D09A80CA8 -:10162000B91C83E0C80ED11C8DE4C81682E0D80630 -:1016300069F70E94570A8091390200FB87F980936D -:101640003902902F969580913A028078892B10FB71 -:1016500087F980933A02E0923B02F0923C025520D7 -:1016600051F06091390270913A0280913B02909161 -:101670003C020E94050A0F900F900F90DF91CF91CE -:101680001F910F91FF90EF90DF90CF90BF90AF90A0 -:101690009F908F907F906F905F90089521E00C94C1 -:1016A000970AE9E3F2E02081221F2227221F3091CE -:1016B0003A02432F440F842F822B37FB992790F94E -:1016C000089668E671E00E94CF2B438162810C94FA -:1016D0004E0B20913902221F2227221F30913A02FD -:1016E000432F440F842F822B37FB992790F98830A2 -:1016F00091051CF4805A9E4F05C0089768E671E07A -:101700000E94CF2B40913C0260913B020C944E0B07 -:1017100060913B02862F90E0883F910514F4685F4A -:1017200001C06FEF80913902881F8827881F909130 -:101730003A02292F220F97FB992790F940913C02FA -:10174000822B0C944E0B60913B02862F90E0089701 -:1017500014F0685001C060E080913902881F88272A -:10176000881F90913A02292F220F97FB992790F911 -:1017700040913C02822B0C944E0B40913C02842FF2 -:1017800090E0883F910514F4485F01C04FEF8091CD -:101790003902881F8827881F90913A02292F220F2B -:1017A00097FB992790F960913B02822B0C944E0B8A -:1017B00040913C02842F90E0089714F0485001C0FB -:1017C00040E080913902881F8827881F90913A0253 -:1017D000292F220F97FB992790F960913B02822BCA -:1017E0000C944E0B20E00C94970ACF939091390201 -:1017F00090FF40C09178811102C0926007C085328D -:1018000010F0986403C08F73880F982B909339025F -:10181000662351F06091390270913A0280913B0247 -:1018200090913C020E94050AC09139026C2F669586 -:101830006F7370E04BE050E082E091E00E94E92B92 -:10184000892B19F01092830103C081E080938301FA -:10185000CC1FCC27CC1F90913A02892F880F97FB81 -:10186000992790F940913C0260913B028C2BCF91DB -:101870000C94F20BCF91089561E00C94F50B8091DC -:10188000390286958F738F5F853208F081E00C9462 -:101890003C0C8091390286958F73815009F484E263 -:1018A0000C943C0CE9E3F2E08081816080838695B2 -:1018B0008F730C943C0C60E00C94F50B80910B0240 -:1018C000816080930B020E94141C811104C00E944D -:1018D000F31B0E940B0A0E94010A60933902709365 -:1018E0003A0280933B0290933C026E7761F40E942F -:1018F0000B0A0E94010A6093390270933A028093A6 -:101900003B0290933C0281E08093830180913902F5 -:1019100080FF04C086958F730C945B0C08959091A2 -:10192000390290FF10C0253070F430E0F901EE0F5D -:10193000FF1F2E0F3F1FF901E25CFD4F8183608383 -:1019400042830C94570A08951F93CF93DF9300D0DE -:101950001F92CDB7DEB73091390230FF0CC0122F85 -:101960009E012F5F3F4F0E948D09212F4B8169817E -:101970008A810E948F0C0F900F900F90DF91CF9172 -:101980001F910895E9E3F2E080818E7F808360817A -:101990007181828193810E94050A109283012FEF49 -:1019A00080E792E0215080409040E1F700C00000C5 -:1019B0000C94570A8091390280FD0C94C20C0C944F -:1019C000520CCF93C82F80918101909182010E9487 -:1019D0004B1DEC2FF0E0E257FD4FE491F0E08E1745 -:1019E0009F0708F443C00E943F1D9093820180939B -:1019F00081016091800170E080E090E00E94BC294C -:101A000020E030E04FE753E40E94DF282BED3FE079 -:101A100049E450E40E94E52A0E94522B0E94592971 -:101A20002BE43AE34EE25FE30E94722820EF3BEFA3 -:101A300048ED52E40E94E52A0E948B29462F8091AE -:101A40003902881F8827881F90913A02292F220F78 -:101A500097FB992790F960913B02822B0E947D0AA7 -:101A60008091800190E0019680938001CF9108954C -:101A7000CF93C82F80917E0190917F010E944B1DD2 -:101A8000EC2FF0E0E557FD4FE491F0E08E179F0753 -:101A9000E8F00E943F1D90937F0180937E0140916A -:101AA0003C0260913B0280917C0190917D010E94FB -:101AB0007D0A80917C0190917D01019668E671E03C -:101AC0000E94BB2B90937D0180937C01CF91089560 -:101AD000CF92DF92FF920F931F93CF93DF93F82E55 -:101AE00080917A0190917B010E944B1DEF2DE6952C -:101AF000F0E0E857FD4FE491F0E08E179F07C0F14A -:101B00000E943F1D90937B0180937A010EE312E0C7 -:101B1000C0E0D0E088E6C82EDD24D394809178011F -:101B2000909179018C0F9D1FB6010E94BB2B9801EB -:101B300040913C0260913B020E948D09C85BDF4FDF -:101B40000D5F1F4FC83681E0D80741F70E94570A42 -:101B50008091780190917901F0FE05C00196BE0157 -:101B60000E94BB2B01C0019790937901809378016B -:101B7000DF91CF911F910F91FF90DF90CF9008954B -:101B8000CF92DF92EF92FF920F931F93CF93DF9349 -:101B9000C82F80FF02C01FEF01C011E080917601C5 -:101BA000909177010E944B1DC695EC2FF0E0EB570A -:101BB000FD4FE491F0E08E179F0708F45BC00E9490 -:101BC0003F1D90937701809376012EE3E22E22E071 -:101BD000F22EC0E0D0E0F70111821082128294E070 -:101BE000C92ED12C00E080917501800F87FD8B5F9D -:101BF000082E000C990BC817D907E9F480913C0214 -:101C00008C9DA0018D9D500D11245595479555959E -:101C1000479580913902881F8827881F90913A0242 -:101C2000592F550F97FB992790F9970160913B0227 -:101C3000852B0E948D09010FF1E0CF1AD10899F68A -:101C4000219683E0E80EF11CC530D10521F60E94F3 -:101C5000570A80917501113031F4811102C084E07E -:101C600007C0815005C090E00196BE010E94CF2BB5 -:101C700080937501DF91CF911F910F91FF90EF90AD -:101C8000DF90CF9008950F931F93CF93DF93C82FCA -:101C900080917301909174010E944B1DEC2FF0E034 -:101CA000EE57FD4FE491F0E08E179F0708F456C001 -:101CB0000E943F1D9093740180937301CEE3D2E0A4 -:101CC000FE01118210821282339682E0ED34F80711 -:101CD000C1F700E010E080917201082E000C990B12 -:101CE00008171907ECF080910101082E000C990BE0 -:101CF00080179107ACF080913902881F8827881FD0 -:101D000090913A02592F550F97FB992790F99E0110 -:101D100040913C0260913B02852B0E948D0903C0DB -:101D2000198218821A820F5F1F4F23960530110502 -:101D300091F60E94570A8091000190917201980FCC -:101D40009093720120910101280F20930101121636 -:101D500014F494301CF0819580930001DF91CF91B1 -:101D60001F910F910895EF92FF920F931F93CF93BE -:101D7000DF9380917001909171010E944B1D883E0C -:101D80009340D0F10E943F1D9093710180937001A8 -:101D9000C0916E01D0916F012196C170DD27D09363 -:101DA0006F01C0936E018EE3E82E82E0F82E10E002 -:101DB00008E7812F8695FE01E80FF11DCF018170A4 -:101DC0009927970140913C0260913B02FC010E9FD4 -:101DD000C0010F9F900D11240E948D091F5FF3E039 -:101DE000EF0EF11C153029F7DF91CF911F910F9164 -:101DF000FF90EF900C94570ADF91CF911F910F91B4 -:101E0000FF90EF900895CF93DF9300D01F92CDB74E -:101E1000DEB780916C0190916D010E944B1DE0E84E -:101E2000F2E02591349182179307C0F180916B0104 -:101E300081110CC09E012F5F3F4F4FEF6FEF80E08D -:101E400090E00E948D098A8180936B010E943F1D62 -:101E500090936D0180936C0180916A01813051F003 -:101E600028F0823061F440916B010AC080916B01CF -:101E700040E007C060916B0140E080E003C040E0BB -:101E800080E060E00E946C0A80916A0190E0019617 -:101E900063E070E00E94CF2B80936A010F900F9057 -:101EA0000F90DF91CF910895CF93DF9380916801D8 -:101EB000909169010E944B1D843F914008F444C0F9 -:101EC0000E943F1D9093690180936801C0E0D0E0BB -:101ED00020916601309167018091390290913A0218 -:101EE000C230D1051CF4232B79F002C0232B61F4FE -:101EF000881F8827881F392F330F97FB992790F960 -:101F00002C2F40913C020AC0881F8827881F392F38 -:101F1000330F97FB992790F92C2F40E060913B02FB -:101F2000832B0E94A40C2196C530D10589F60E940E -:101F3000570A8091660190916701019681709927F7 -:101F40009093670180936601DF91CF91089580910E -:101F500083018823D9F190913902892F86958F7357 -:101F60002EE3280F2F73243018F482500C94E10CC8 -:101F70002AE3280F2F73233018F486500C94380D61 -:101F800027E3280F2F73263018F489500C94680D1E -:101F900021E3280F2F73263018F48F500C94C00DB6 -:101FA0002BE2280F2F73233018F485510C94430E25 -:101FB000892F8E77803311F40C94B30E863411F48C -:101FC0000C94030F883411F40C94540F089521B32A -:101FD000342F3095232331B3432B3FB7F894FC01C2 -:101FE000680F791FE617F70789F0819198E041BBE8 -:101FF000000000C087FF21BB880F000000C000C0A8 -:1020000000C021BB00C09A9591F7ECCF3FBF089567 -:1020100020B3242B20BB9B01220F331F620F731FA1 -:102020000E94E70F87EC90E00197F1F700C00000F5 -:10203000089540E10C9408109093890180938801E1 -:102040000895E0918801F0918901309721F0019085 -:10205000F081E02D099480E00895E0918801F091ED -:102060008901309721F00280F381E02D09940895D1 -:10207000E0918801F0918901309721F00480F58189 -:10208000E02D099408952091860130918701281749 -:10209000390771F09093870180938601E091880160 -:1020A000F0918901309721F00680F781E02D0994A5 -:1020B000089520918401309185012817390771F026 -:1020C0009093850180938401E0918801F0918901CA -:1020D000309721F00084F185E02D0994089508954A -:1020E0000C946F1081E008950E94361D85B78068BA -:1020F00085BF85B7806885BF0E9465080E94F81D6E -:102100000C945E0C5F926F927F928F929F92AF922F -:10211000BF92CF92DF92EF92FF920F931F93CF93D4 -:10212000DF93CDB7DEB72A970FB6F894DEBF0FBEA8 -:10213000CDBF0E94BF080E947210811111C08FEFA5 -:1021400089838A831B820E943F1D8160782F9D8333 -:102150008C8349815A816B818D810E943F1156C0C9 -:102160009BE8692E91E0792E00E010E088248394AA -:10217000912C502E802F0E9483096C01F301A190B5 -:10218000B1903F01A826B926A114B10431F40F5F24 -:102190001F4F0330110569F7D2CF80910B0281FDEB -:1021A0000E948C0980E090E07401082E02C0EE0CC1 -:1021B000FF1C0A94E2F795012E213F21232B09F100 -:1021C0008E835F82CE20DF2081E0CD2809F480E07D -:1021D00088870E943F1D8160782F9A8789874E816A -:1021E0005F8168858A850E943F11000F111FF801E9 -:1021F000E557FE4F80819181E826F926F182E08241 -:1022000005C001968A30910579F6C1CF0E949B20C6 -:102210000E94211090918A018917D9F00E94211003 -:1022200080938A012A960FB6F894DEBF0FBECDBF09 -:10223000DF91CF911F910F91FF90EF90DF90CF90A2 -:10224000BF90AF909F908F907F906F905F900C9415 -:10225000F7022A960FB6F894DEBF0FBECDBFDF910E -:10226000CF911F910F91FF90EF90DF90CF90BF9093 -:10227000AF909F908F907F906F905F900895CF93D5 -:10228000DF93CDB7DEB72B970FB6F894DEBF0FBE46 -:10229000CDBF4F83588769877A878B87DE01119678 -:1022A00086E0FD0111928A95E9F785E0FE013796F7 -:1022B00001900D928A95E1F749815A816B817C8169 -:1022C0008D819E810E9456182B960FB6F894DEBF22 -:1022D0000FBECDBFDF91CF910895FC018081918128 -:1022E0000E94251B0895882309F4F8C08238C1F4A0 -:1022F0000E94211081FDF2C069E380910D0190914F -:102300000E010E94971C0E94841B2FEF81EE94E027 -:10231000215080409040E1F700C0000069E319C0FF -:102320008338F9F40E94211080FDD8C063E58091C4 -:102330000D0190910E010E94971C0E94841B2FEFAB -:1023400081EE94E0215080409040E1F700C0000011 -:1023500063E580910D0190910E010E94A21C0C94E6 -:10236000841B8438C1F40E94211082FDB7C067E449 -:1023700080910D0190910E010E94971C0E94841B78 -:102380002FEF81EE94E0215080409040E1F700C0B3 -:10239000000067E4DECF9CEF980F913A40F4682F7D -:1023A00080910D0190910E010E94971CD8CF90E270 -:1023B000980F983050F4877091E001C0990F8A957A -:1023C000EAF7892F0E94BA1BCACF9BE5980F93307A -:1023D00070F4853A29F0863A31F083E890E005C040 -:1023E00081E890E002C082E890E00C94431098E508 -:1023F000980F953108F06EC0883A61F1893A69F119 -:102400008A3A71F18B3A79F18C3A81F18B3B89F1FF -:102410008C3B91F18D3A99F1803BA1F18E3AA9F173 -:102420008F3AB1F1813BB9F1823BC1F1833BC9F1F4 -:10243000843BD1F1853BD9F1863BE1F1873BE9F162 -:10244000883BF1F1893BF9F18A3B09F43FC080E018 -:1024500090E03EC082EE90E03BC089EE90E038C054 -:102460008AEE90E035C085EB90E032C086EB90E0DC -:102470002FC083EB90E02CC084EB90E029C087EB69 -:1024800090E026C08CEC90E023C08DEC90E020C062 -:1024900083E891E01DC08AE891E01AC082E991E0EA -:1024A00017C084E991E014C081E292E011C083E298 -:1024B00092E00EC084E292E00BC085E292E008C098 -:1024C00086E292E005C087E292E002C08AE292E0F2 -:1024D0000C945910803F10F00C94A31F089588238A -:1024E00009F462C0823879F40E94211081FF5CC037 -:1024F00069E380910D0190910E010E94971C0E944A -:10250000841B69E310C08338B1F40E94211080FF5E -:102510004BC063E580910D0190910E010E94971CC4 -:102520000E94841B63E580910D0190910E010E9431 -:10253000A21C0C94841B843879F40E94211082FF21 -:1025400033C067E480910D0190910E010E94971CA9 -:102550000E94841B67E4E7CF9CEF980F913A10F438 -:10256000682FE1CF90E2980F983050F4877091E097 -:1025700001C0990F8A95EAF7892F0E94C01BD9CF15 -:102580009BE5980F933020F480E090E00C9443108A -:1025900098E5980F953120F480E090E00C94591064 -:1025A000803F10F00C940B200895882321F00E94A6 -:1025B000BA1B0C94841B0895882321F00E94C01B31 -:1025C0000C94841B08958F929F92AF92BF92DF92DA -:1025D000EF92FF920F931F93CF93DF937C01D62F3F -:1025E000C72FFC01058102950F70128111110E9405 -:1025F000D71B0E947D1B882379F0112369F080E2AC -:102600008D0F883048F082E00E94661B0E947D1B7F -:1026100091E0D82ED92601C0D12CBC2EB2948FE0E7 -:10262000B8228B2D90E0FC01E859FF4F0C94E32B6E -:102630008C2F807FCF70882311F0C295C07F11232B -:1026400099F0CC2309F4C3C180E28D0F883010F0DB -:10265000D11104C08C2F0E94BA1B03C08C2F0E9482 -:10266000CA1B0E94841BB3C18D2F0E946F12CC2302 -:1026700009F4D2C180E28D0F883010F0D11104C06E -:102680008C2F0E94C01B03C08C2F0E94D01B0E9465 -:10269000841BC2C18C2F807FCF70803211F0C29515 -:1026A000C07FDD2319F0D130C9F022C0112371F0B1 -:1026B000002341F0013031F40E94F01B8C2B0E946A -:1026C000EA1BAAC10E94F01B8C2B3AC1002319F00F -:1026D000013009F4A1C10E94ED1B18C0112321F0A3 -:1026E000063008F099C10EC0053008F095C10EC043 -:1026F000112351F0002331F0F701858180FF67C17C -:102700008F7085838C2F1CC1011172C18C2F1EC14B -:102710008C2F86958695837019F0813061F07CC18D -:10272000112321F08D2F9C2F937002C080E090E048 -:102730000E9443107EC1112321F08D2F9C2F937096 -:1027400002C080E090E00E94591073C11123F9F09B -:10275000D53F51F0D63F71F0D43FA9F480914D029E -:1027600090914E0281600BC080914D0290914E027B -:10277000826005C080914D0290914E0284609093DA -:102780004E0280934D028D2F0E94A31F1EC0D53F85 -:1027900051F0D63F71F0D43FA9F480914D02909151 -:1027A0004E028E7F0BC080914D0290914E028D7F24 -:1027B00005C080914D0290914E028B7F90934E0206 -:1027C00080934D028D2F0E940B200E94902031C1DA -:1027D0008C2F837009F04CC0111127C12D2F229529 -:1027E00026952770220F220F6D2F6F70862F90E095 -:1027F000A0E0B0E04C015D01022E04C0880C991CE1 -:10280000AA1CBB1C0A94D2F7D4FF12C08FE090E040 -:10281000A0E0B0E004C0880F991FAA1FBB1F2A9533 -:10282000D2F7BC01CD01609570958095909503C05D -:1028300060E070E0CB01C695C695C370C23051F020 -:1028400080F4682979298A299B29C13071F00E9476 -:10285000A519EBC0682979298A299B290E94B719F3 -:10286000E4C00E94A519C501B4010E949319DDC0FE -:10287000112319F08C2F817001C08695882309F4EB -:10288000D4C02D2F229526952770220F220F6D2F51 -:102890006F70862F90E0A0E0B0E04C015D01022E49 -:1028A00004C0880C991CAA1CBB1C0A94D2F7D4FF44 -:1028B00012C08FE090E0A0E0B0E004C0880F991F44 -:1028C000AA1FBB1F2A95D2F7BC01CD016095709558 -:1028D0008095909503C060E070E0CB01C695C695E9 -:1028E000C370C23051F080F4682979298A299B2964 -:1028F000C13071F00E946A1A98C0682979298A2922 -:102900009B290E947C1A91C00E946A1AC501B401D9 -:102910000E94581A8AC08D2F90E0FC01E05EF109F8 -:10292000E531F10508F04FC0E858FF4F0C94E32B58 -:10293000DF708C2F8F71112331F00E94F1198D2FD0 -:102940000E94D51269C00E94121A8D2F0E94DC12BB -:1029500063C0112341F0053008F05EC08C2F8F71E9 -:102960000E94371A59C0063008F056C0F7CF11231D -:1029700039F08C2F8F710E94F1194EC01123C9F3C9 -:102980008C2F8F710E94121A47C0112329F08C2FAF -:102990008F710E94DC1940C00E94D7193DC01123DD -:1029A00049F0CF718C2F0E94F11963E08C2F0E94A7 -:1029B0005D1B32C081E00E94661B023068F182E03C -:1029C0000E94661B29C0112331F0002391F28D2F44 -:1029D0000E94731121C0002399F2D93349F4FFEF0B -:1029E00027EE83E0F15020408040E1F700C0000076 -:1029F0008D2F0E946F1210C04C2F4F706D2FC7018A -:102A00000E94AF050E94041914C04C2F4F706D2F07 -:102A1000C7010E94B2050DC098E0B91631F0B91691 -:102A200040F086EF8B0D823020F40E9421100E942E -:102A3000F702DD20E1F00E94591B80FD18C0F7016C -:102A400012820E94531B0E94F119C7010E94431574 -:102A50000E94531BDF91CF911F910F91FF90EF9038 -:102A6000DF90BF90AF909F908F900C94121ADF91DF -:102A7000CF911F910F91FF90EF90DF90BF90AF909B -:102A80009F908F9008950F931F93CF93DF93EC0146 -:102A9000988189812B813C81232B31F08F3F31F448 -:102AA00081E09F3F19F403C081E001C080E080FD18 -:102AB00013C0CE010E940F03882371F068817981D1 -:102AC0008A810E94301B8C010E948E1A0E948119FB -:102AD000B801CE010E94E312DF91CF911F910F91B7 -:102AE00008950E94D71B0E94E71B80910D019091D1 -:102AF0000E010E94AD1C0E94841B0E9432210E9484 -:102B0000902080E090E00E94431080E090E00C94E0 -:102B100059100E94C71B0C9471150E94251BE92FA8 -:102B2000E295EF704E2F50E0FA013297EE30F1054A -:102B3000B0F4E357FF4F0C94E32B803F91F018F46F -:102B4000803E68F40EC0843F51F40BC0803E48F0D4 -:102B5000813F29F406C093FB882780F9089580E01F -:102B6000089581E00895CF93DF9300D000D01F92A5 -:102B7000CDB7DEB70F900F900F900F900F90DF91B1 -:102B8000CF910895CF93DF9300D000D000D0CDB780 -:102B9000DEB726960FB6F894DEBF0FBECDBFDF912D -:102BA000CF9108951F93CF93DF93C091920116E0C8 -:102BB00080919301C81799F0D0E01C9FF0011D9FF0 -:102BC000F00D1124EC56FE4F4081518162817381DA -:102BD000848195810E94C2152196C770E9CFDF914B -:102BE000CF911F9108954091C4015091C50160910A -:102BF000C6017091C7018091C8019091C9010C94E0 -:102C0000C215CF938091C90182958F7009F05FC082 -:102C10008091C601882309F45AC080919201B09135 -:102C200093017091C401A091C5014091C7015091D9 -:102C3000C80191E07F3F09F090E0692FC6E08B1753 -:102C400009F445C04115510521F0AF3F21F020E0C6 -:102C500003C021E001C0262F90E020FD35C0C89FB1 -:102C6000F001C99FF00D1124EC56FE4F21812A136B -:102C70002BC02081271328C02281211125C0238148 -:102C800034812417350710F421503109241B350BEA -:102C9000283C3105C8F42091C9012F702061209390 -:102CA000C90126E0289FF001299FF00D1124E75665 -:102CB000FE4F80818F708061808384EC91E00E9460 -:102CC0004315CF910C94D21501968770B8CFCF9150 -:102CD0000895AF92BF92CF92DF92EF92FF920F933F -:102CE0001F93CF93DF93CDB7DEB761970FB6F894FC -:102CF000DEBF0FBECDBF8C0185E0F801DE011D9661 -:102D000001900D928A95E1F7D8014C9111965C9152 -:102D100011971296EC903091C4016091C501809199 -:102D2000C7019091C801009731F06F3F31F421E065 -:102D30003F3F19F403C021E001C020E0B22FB17081 -:102D4000BB2E20FD60C1F801C380D480A090C601D5 -:102D5000AA2009F4EEC02091C901C816D90628F0AE -:102D6000D601A81BB90BCD0104C0809590958C0DA0 -:102D70009D1DFF24F394883C910580F0F12C207F69 -:102D800009F09CC07C2DD98AC88A6E2D89890E9441 -:102D9000B31584EC91E00E9443152DC1822F807FF2 -:102DA00009F054C0561314C0431312C0FE2CE11096 -:102DB0000FC02F7020612093C9010E94F31584EC8D -:102DC00091E00E9443158091C901F80185835CC19F -:102DD000CD2831F05F3F31F481E04F3F19F403C05B -:102DE00081E001C080E080FD03C081E08E2502C04B -:102DF00080E090E0F82FF170FF2E80FF1CC08091E2 -:102E000092012091930136E0821709F41AC190E0F3 -:102E1000389FF001399FF00D1124EC56FE4F61816F -:102E2000561306C06081461303C06281E61203C0D8 -:102E300001968770E9CFFE2CEE2009F425C1809120 -:102E4000C90181608093C901F12C1EC1561309C0CC -:102E5000431307C0E11005C08091C901F8018583C3 -:102E6000A4C04D875E878D859E850E948D15882321 -:102E700079F1EE2069F12091C901822F82958F703E -:102E800090E0029774F08091C4019091C5019887F9 -:102E90008F831986DB86CA862C87CE0107960E940F -:102EA000431586E0F801A4ECB1E001900D928A95FB -:102EB000E1F70E9401160E94F3150DC0561771F03C -:102EC0004D875E878D859E850E948D1581111AC064 -:102ED000C8010E944315FF24F394D6C04313F0CFDA -:102EE000E110EECF8091C901F8018583C8010E94ED -:102EF000431586E0E4ECF1E0DF011D928A95E9F7E5 -:102F0000FA2CC2C0EE2021F32091C901822F8295B4 -:102F10008F7090E002972CF28091C4019091C501CE -:102F20009A8389831B82DD82CC822E83CE01019617 -:102F3000B6CFC816D90628F0F601E81BF90BCF0169 -:102F400004C0809590958C0D9D1D883C910548F09E -:102F5000F12C7C2DD98AC88A6E2D89890E94B315DF -:102F60004AC0FE2CEE2009F4B3CF561333C04313EE -:102F700031C02091C90120FD24C0822F82958F701D -:102F8000482F50E041155105E1F0D80115962C93DA -:102F900015974F30510549F08F5F982F9295907F8C -:102FA000822F8F70892B15968C93C8010E94431530 -:102FB00086E0F801A4ECB1E001900D928A95E1F76A -:102FC0003DC086E0F801A4ECB1E001900D928A9535 -:102FD000E1F75AC04D875E878D859E850E948D15CD -:102FE00081115FCF8091C90181608093C901C801BF -:102FF0000E94431549C0E4ECF1E086E0DF011D9238 -:103000008A95E9F71BC0EE2009F462CF4D875E87F1 -:103010008D859E850E948D15F82E882309F458CF42 -:1030200086E0F801A4ECB1E001900D928A95E1F7F9 -:1030300084EC91E00E946D110E9401160E94F3152C -:1030400023C04D875E878D859E850E94251B292F75 -:1030500022952F70223028F49F7039F0811105C01D -:103060000BC0243028F49F7049F4805E883020F033 -:10307000C8010E944315BF2CFB2C06C0D801159631 -:103080009C91907F91F7F8CF8F2D61960FB6F894B1 -:10309000DEBF0FBECDBFDF91CF911F910F91FF908B -:1030A000EF90DF90CF90BF90AF9008951F93CF9394 -:1030B000DF93CDB7DEB72C970FB6F894DEBF0FBE07 -:1030C000CDBF4F83588769877A878B879C87CE01CE -:1030D00007960E9469168823D1F09F8188852A85EA -:1030E0003B85232B31F08F3F31F481E09F3F19F472 -:1030F00003C081E001C080E080FD47C04F8158855A -:1031000069857A858B859C850E94C2153EC086E0C4 -:10311000FE013796DE01119601900D928A95E1F736 -:10312000FF81E8856A857B856115710531F0EF3F88 -:1031300031F481E0FF3F19F403C081E001C080E079 -:1031400080FD23C02091930130E0C9010196877072 -:1031500099274091920150E084179507F1F1F98386 -:10316000EA837D836C8396E0929FD001939FB00D9C -:103170001124AC56BE4FFE01319601900D929A95E6 -:10318000E1F7809393010E94D21516E0809192019D -:1031900090919301891771F1189FC00111248C56E9 -:1031A0009E4F0E946916882329F1E09192011E9F8B -:1031B000F0011124EC56FE4F4081518162817381F0 -:1031C000848195810E94C2158091920190E00196C0 -:1031D0008770992780939201D9CF0E948915109208 -:1031E000930110929201E4ECF1E086E0DF011D9280 -:1031F0008A95E9F72C960FB6F894DEBF0FBECDBFC7 -:10320000DF91CF911F910895EF92FF920F931F933B -:10321000CF93DF938C01892B09F46CC0F12CEE2441 -:10322000E394E8012196F8018491843740F48430D6 -:1032300008F051C0813081F0823019F15BC08537D0 -:1032400009F444C0A8F19CE7980F903708F052C0E9 -:103250008F770E946F1241C00E5F1F4FFE01849155 -:1032600090E2980F983050F48770FE2D01C0FF0F48 -:103270008A95EAF78F2F0E94DA1B14C00E947311FF -:103280002DC00E5F1F4FFE01849190E2980F983081 -:1032900060F48770FE2D01C0FF0F8A95EAF78F2F2B -:1032A0000E94E01B0E94841B19C00E946F1216C06E -:1032B0000E5F1F4FFE01C491CC2381F08FE99FE088 -:1032C0000197F1F700C00000C150F6CF0E5F1F4F0D -:1032D000FE01F49003C00E9473118E018F2D88238C -:1032E00009F49FCFEFE9FFE03197F1F700C000004C -:1032F0008150F5CFDF91CF911F910F91FF90EF900B -:103300000895089508950C9482190E94831960937A -:10331000E2017093E3018093E4019093E5010C9442 -:1033200071150C9485190F931F930091E201109170 -:10333000E3012091E4013091E501602B712B822B98 -:10334000932B1F910F910C9485190F931F9300914C -:10335000E2011091E3012091E4013091E501602345 -:103360007123822393231F910F910C9485190F933E -:103370001F930091E2011091E3012091E40130914B -:10338000E50160277127822793271F910F910C94E5 -:1033900085190C9482190E94C9196093DE017093FB -:1033A000DF018093E0019093E1010C94711560E0DE -:1033B00070E0CB010C94CB190F931F9341E050E0C8 -:1033C00060E070E08A019B0104C0000F111F221F02 -:1033D000331F8A95D2F7C901B8011F910F910C9440 -:1033E000CB190F931F9341E050E060E070E004C000 -:1033F000440F551F661F771F8A95D2F78091DE0113 -:103400009091DF01A091E001B091E1018A019B015F -:10341000082B192B2A2B3B2BC901B8011F910F91A7 -:103420000C94CB190F931F9341E050E060E070E0E3 -:1034300004C0440F551F661F771F8A95D2F7409529 -:103440005095609570958091DE019091DF01A0917B -:10345000E001B091E1018A019B01082319232A238D -:103460003B23C901B8011F910F910C94CB190F9305 -:103470001F9341E050E060E070E004C0440F551F2E -:10348000661F771F8A95D2F78091DE019091DF0148 -:10349000A091E001B091E1018A019B010827192761 -:1034A0002A273B27C901B8011F910F910C94CB1912 -:1034B0000F931F930091DE011091DF012091E00135 -:1034C0003091E101602B712B822B932B1F910F9177 -:1034D0000C94CB190F931F930091DE011091DF0123 -:1034E0002091E0013091E101602371238223932335 -:1034F0001F910F910C94CB190F931F930091DE0134 -:103500001091DF012091E0013091E10160277127E6 -:10351000822793271F910F910C94CB1908952AE0CD -:10352000929F800D1124E82FE695E695E695877029 -:1035300051E001C0550F8A95EAF785E0E89FF00158 -:103540001124E653FE4F20E030E070E04081CB01D3 -:10355000022E02C0969587950A94E2F781708195B4 -:1035600084278523842781932F5F3F4F25303105A2 -:1035700069F708952AE0929F800D1124682F6695BF -:1035800066956695982F977085E0689FB001112425 -:1035900040E050E080E0FB01E40FF51FE653FE4FF2 -:1035A000208130E0092E02C0369527950A94E2F773 -:1035B00021703327042E01C0220F0A94EAF7822BD0 -:1035C0004F5F5F4F4530510531F70895CF92DF923D -:1035D000EF92FF920F931F93CF93DF938C01C090D4 -:1035E000DE01D090DF01E090E001F090E1018091F8 -:1035F000E2019091E301A091E401B091E501C82AB4 -:10360000D92AEA2AFB2ACFE1D0E0D701C6010C2E45 -:1036100004C0B695A795979587950A94D2F780FD33 -:1036200004C0219790F780E007C0B8018C2F0E945A -:10363000CE050197B1F38C2FDF91CF911F910F91A0 -:10364000FF90EF90DF90CF900895CF93DF93EC0140 -:103650000E94E61ABE010E94CE05DF91CF91089527 -:103660001F93CF93DF93EB0190919101992321F068 -:10367000CB010E94251B13C0882349F0CB010E9477 -:10368000E61A182F682FCE010E948F1A04C0CB01B2 -:103690000E94BA1A182FBE01812F0E94CE05DF9119 -:1036A000CF911F9108958091E60185958595859527 -:1036B00008958091E6018770089598E0899F9001B0 -:1036C0001124262B2093E6010C94F1192091E60198 -:1036D000809582238093E601982F977069F430E0FB -:1036E000482F082E000C550B2417350729F0859517 -:1036F000859585950C94121A08959091E60197701E -:1037000081E009F480E00895E0910D01F0910E014F -:1037100080910A028083E0910D01F0910E01908169 -:1037200080910902892B8083E0910D01F0910E01B7 -:10373000908180910802892B80838091E701882302 -:1037400081F0E0910D01F0910E019081892B808331 -:1037500080910D0190910E010E943A1C81111092EE -:10376000E70180910D0190910E010C942D10809134 -:103770000A02089590910A02892B80930A02089503 -:10378000809590910A02892380930A0208951092ED -:103790000A02089590910902892B809309020895E5 -:1037A00080959091090289238093090208951092CF -:1037B0000902089590910802892B809308020895C8 -:1037C00080959091080289238093080208951092B1 -:1037D000080208958093E70108951092E701089583 -:1037E0008091E70108956DEE7EEF80E090E00E9409 -:1037F000282C60E082E090E00E940A2C60E083E0E8 -:1038000090E00E940A2C60E084E090E00E940A2C84 -:1038100060E085E090E00E940A2C40E050E0BA01B0 -:1038200088E090E00C941C2C80E090E00E94042C36 -:1038300021E08D3E9E4F09F020E0822F089582E026 -:1038400090E00C94F62B682F82E090E00C940A2C08 -:1038500083E090E00C94F62B682F83E090E00C94CA -:103860000A2C84E090E00C94F62B682F84E090E022 -:103870000C940A2CFC0131969C01205E3F4F80E0A5 -:10388000919191118F5FE217F307D1F708959C0191 -:10389000FC0132969FEF80E04191461789F09F3FEF -:1038A00019F4411101C0982F8F5F8E31A9F79F3F06 -:1038B00039F0F901E90FF11D97FDFA95628308953A -:1038C00008959C01225E3F4FFC014281461301C0D6 -:1038D0001282019682179307B9F70895262F26952D -:1038E000269526952F3169F0FC01E20FF11D6770D6 -:1038F00021E030E001C0220F6A95EAF78181282B90 -:1039000021830895262F2695269526952F3171F02F -:10391000FC01E20FF11D677021E030E001C0220FD1 -:103920006A95EAF7209581812823218308952091C3 -:103930001F01222329F02091530227FD0C946E1CB5 -:103940000C94471C20911F01222329F0209153023F -:1039500027FD0C94821C0C94611CFC01319680960E -:103960001192E817F907E1F7089508950C94B51C32 -:103970000C94B51CCF930E94B81C0E94BF080E94F3 -:10398000B61CC0E08C2F0E948309892B29F4CF5FDD -:10399000C330C1F780E001C081E0CF9108950C945D -:1039A000B51C0C94CF1C0E94D11C8091590284300C -:1039B00049F110920C0220E488E190E00FB6F894EF -:1039C000A895809360000FBE2093600080E00E9465 -:1039D000F7020E94D11C83B7817F846083BF83B7C5 -:1039E000816083BF7894889583B78E7F83BF0FB63D -:1039F000F894A8958091600088618093600010928F -:103A000060000FBE08950C94B51C0E9489150E9499 -:103A100021100E94F7020C94031D1F920F920FB603 -:103A20000F9211248F939F93AF93BF9380910C02B9 -:103A3000811113C080914F0290915002A0915102C8 -:103A4000B09152024196A11DB11D80934F029093F7 -:103A50005002A0935102B0935202BF91AF919F9137 -:103A60008F910F900FBE0F901F90189582E084BD2C -:103A700093E095BD9AEF97BD80936E0008952FB7A0 -:103A8000F89480914F0290915002A0915102B09110 -:103A900052022FBF0895CF92DF92EF92FF920F93C1 -:103AA0001F932FB7F89440914F02509150026091AC -:103AB0005102709152022FBF6A017B01EE24FF2454 -:103AC0008C0120E030E0C016D106E206F30610F4C7 -:103AD000415051099A01281B390BC9011F910F91BF -:103AE000FF90EF90DF90CF90089578941F920F92FF -:103AF0000FB60F9211248F939F93AF93BF93809132 -:103B00004F0290915002A0915102B0915202019641 -:103B1000A11DB11D80934F0290935002A0935102BA -:103B2000B0935202BF91AF919F918F910F900FBEB2 -:103B30000F901F90189587E797E79093010880935F -:103B400000089AE088E10FB6F894A8958093600089 -:103B50000FBE90936000FFCFAF92BF92CF92DF92E3 -:103B6000EF92FF920F931F93CF93C0E0CC24C394A6 -:103B7000D12CE82EF12C8C2F0E9483095C0100E0EF -:103B800010E0C601002E02C0880F991F0A94E2F7C8 -:103B90008A219B21892B31F40F5F1F4F0A301105B9 -:103BA00081F70AC0602F7C2F80E00E94B305E816E1 -:103BB000F90691F781E004C0CF5FC330E1F680E001 -:103BC000CF911F910F91FF90EF90DF90CF90BF901A -:103BD000AF900895CF93C82F8CE20E94AC1D88232C -:103BE00021F08C2FCF910C94AC1D80E0CF910895E3 -:103BF000CF930E94141C811102C00E94F31BC5E6E2 -:103C0000C15049F00E94BF088FE39CE90197F1F78A -:103C100000C00000F5CF89E20E94EA1D81110FC1AA -:103C20008AE20E94EA1D81110E94F31B85E00E9436 -:103C3000EA1D81110E949B1D0E941F1C80930B0294 -:103C400087E00E94EA1D8823A9F18BE10E94EA1D0A -:103C5000882351F080910B0281FB222720F991E00B -:103C6000922790FB81F90EC08EE00E94EA1D882306 -:103C700061F080910B0282FB222720F991E09227CC -:103C800090FB82F980930B0215C080E10E94EA1D2F -:103C900090910B02882341F093FB222720F981E0C9 -:103CA000822780FB93F904C0892F809580FB90F9CF -:103CB00090930B0280910B020E94231C0E94311CE6 -:103CC00090E0909354028093530280EE0E94EA1D8C -:103CD000882341F080915302982F909590FB80F9B2 -:103CE0008093530289E30E94EA1D882359F0809152 -:103CF000530281FB222720F991E0922790FB81F962 -:103D00008093530282EE0E94EA1D882359F080912D -:103D1000530282FB222720F991E0922790FB82F93F -:103D20008093530286EE0E94EA1D882359F0809109 -:103D3000530283FB222720F991E0922790FB83F91D -:103D40008093530283EE0E94EA1D882359F08091EC -:103D5000530284FB222720F991E0922790FB84F9FB -:103D60008093530285E30E94EA1D882359F08091D5 -:103D7000530285FB222720F991E0922790FB85F9D9 -:103D80008093530281E30E94EA1D882359F08091B9 -:103D9000530286FB222720F991E0922790FB86F9B7 -:103DA0008093530281E10E94EA1D882359F080919B -:103DB000530287FB222720F991E0922790FB87F995 -:103DC00080935302809153020E94351C87E20E9427 -:103DD000EA1DC82F8EE10E94EA1D8111C2608FE1A9 -:103DE0000E94EA1D8111C46080E20E94EA1D8111D7 -:103DF000C86081E20E94EA1D8111C06182E20E94D6 -:103E0000EA1D8111C06283E20E94EA1D8111C06433 -:103E100084E20E94EA1D882311F0C06802C0CC230E -:103E200029F08C2F0E942C1C6C2F03C00E94281C90 -:103E3000682F70E080E090E0CF910C949119CF91C1 -:103E4000089580910F0280FF0BC06091120185E000 -:103E5000689FB001112475956795759567952BC07E -:103E600081FF09C06091120185E0689FB0011124B3 -:103E70007595679520C082FF07C06091120185E0AB -:103E8000689FB001112417C0909110029923D1F0BE -:103E900060911101961788F72091120185E0289F03 -:103EA00090011124929FA001939F500D112470E066 -:103EB000CA010E94CF2B6038710540F4611571056D -:103EC00019F406C065E070E0862F08958FE7089525 -:103ED00081E0089580910F0280FF08C06091100179 -:103EE00070E0759567957595679521C081FF06C04F -:103EF0006091100170E07595679519C082FF04C04C -:103F00006091100170E010C090911002992399F017 -:103F100060910F019617A0F780911001899FC00151 -:103F2000112470E00E94CF2B6038710540F46115B8 -:103F3000710519F406C061E070E0862F08958FE7DF -:103F4000089581E00895803F21F40E94211F81950A -:103F500004C0813F29F40E94211F80931302089519 -:103F6000823F21F40E94211F819504C0833F29F4E0 -:103F70000E94211F809312020895893F19F40E9424 -:103F80006A1F05C08A3F31F40E946A1F81958093A1 -:103F9000140208958B3F21F40E946A1F819504C08A -:103FA0008C3F29F40E946A1F809315020895843F74 -:103FB00021F480911102816017C0853F21F4809126 -:103FC0001102826011C0863F21F480911102846049 -:103FD0000BC0873F21F480911102886005C0883FA3 -:103FE00031F48091110280618093110208958D3F18 -:103FF00021F480910F0281600BC08E3F21F48091EB -:104000000F02826005C08F3F29F480910F02846007 -:1040100080930F020895803F39F48091130287FF47 -:104020006CC01092130269C0813F29F48091130281 -:104030001816BCF362C090911202823F29F497FFD8 -:104040005CC01092120259C0833F19F41916CCF3C8 -:1040500054C0893F41F48091140218160CF04DC0F1 -:10406000109214024AC08A3F29F48091140287FFFB -:1040700044C0F6CF8B3F39F48091150287FF3DC0D5 -:10408000109215023AC08C3F29F48091150218163F -:10409000BCF333C0843F21F4809111028E7F17C09E -:1040A000853F21F4809111028D7F11C0863F21F45C -:1040B000809111028B7F0BC0873F21F48091110208 -:1040C000877F05C0883F31F4809111028F7E8093F5 -:1040D000110213C08D3F21F480910F028E7F0BC01F -:1040E0008E3F21F480910F028D7F05C08F3F29F410 -:1040F00080910F028B7F80930F02809112028111B9 -:104100000EC08091130281110AC0809114028111A6 -:1041100006C080911502811102C01092100208950C -:1041200081E192E00E9438100E943F1D90930E02A0 -:1041300080930D0208951F93CF93DF9380910D021A -:1041400090910E020E944B1DAC0190911002992398 -:1041500021F02091130130E006C0209114018AE083 -:10416000289F900111244217530708F477C08091CB -:104170001202C0911302D091140210911502811104 -:1041800007C0C11167C0D11165C0111163C066C0FD -:104190009F3F19F09F5F90931002181624F40E941D -:1041A000211F809312028091120287FF05C00E9496 -:1041B000211F8195809312021C1624F40E94211F56 -:1041C000809313028091130287FF05C00E94211F74 -:1041D000819580931302309112023323C1F0209114 -:1041E00013022223A1F045EB3403C0011124892FCF -:1041F000911101C081E08093120235EB2303C001CD -:104200001124892F911101C081E0809313021D16A2 -:1042100024F40E946A1F809314028091140287FF85 -:1042200005C00E946A1F819580931402111624F420 -:104230000E946A1F809315028091150287FF05C0B6 -:104240000E946A1F819580931502DF91CF911F9183 -:104250000C9490209F3F09F09DCFAECFDF91CF917E -:104260001F910895E1E1F2E085E0DF011D928A955A -:10427000E9F71092100210920F0208958091360211 -:1042800008950F931F93CF93DF9300D01F92CDB764 -:10429000DEB78C010E94B723823011F0843019F50B -:1042A00083E089831B830A838093E9008FEF9091D9 -:1042B000E800815095FD06C095ED9A95F1F7000054 -:1042C0008111F5CF8091E80085FF0DC040E050E0FE -:1042D00063E070E0CE0101960E94D4238091E80053 -:1042E0008E778093E8000F900F900F90DF91CF9121 -:1042F0001F910F910895CF93DF9300D01F92CDB7F8 -:10430000DEB720915902243031F522E0298380580C -:1043100091099B838A8383E08093E9008FEF9091DA -:10432000E800815095FD06C095ED9A95F1F70000E3 -:104330008111F5CF8091E80085FF0DC040E050E08D -:1043400063E070E0CE0101960E94D4238091E800E2 -:104350008E778093E8000F900F900F90DF91CF91B0 -:104360000895CF93DF93EC010E94B723823011F0C0 -:104370008430F9F482E08093E9008FEF9091E800B7 -:10438000815095FD06C095ED9A95F1F700008111D9 -:10439000F5CF8091E80085FF0CC040E050E065E07B -:1043A00070E0CE010E94D4238091E8008E77809344 -:1043B000E800DF91CF910895CF93DF93EC010E9445 -:1043C000B723823019F0843009F047C080911F0173 -:1043D0008823E1F08091530287FF18C084E0809326 -:1043E000E9008FEF9091E800815095FD06C095E1BE -:1043F0009A95F1F700008111F5CF8091E80085FFD3 -:104400002CC040E050E060E270E017C081E0809393 -:10441000E9008FEF9091E800815095FD06C095ED81 -:104420009A95F1F700008111F5CF8091E80085FFA2 -:1044300014C040E050E068E070E0CE010E94D42358 -:104440008091E8008E778093E80080E2FE01A6E18B -:10445000B2E001900D928A95E1F7DF91CF91089536 -:1044600080915802811109C00E9465250E94C225D1 -:104470008091E20084608093E200089510925802D7 -:104480000895089508950C94051D42E061EC81E0C3 -:104490000E94DE2442E061EC82E00E94DE2442E0E1 -:1044A00061EC83E00E94DE2442E261EC84E00C9443 -:1044B000DE2480915B02833009F455C030F48130F2 -:1044C00071F0823009F48EC008958A3009F47AC000 -:1044D0008B3009F460C0893009F09CC020C0809105 -:1044E0005A02813A09F096C08091E800877F809354 -:1044F000E80080915E0290915F02892B21F460E2D6 -:1045000086E192E003C060E080E090E070E00E940D -:104510001F248091E8008B778093E80008958091B4 -:104520005A02813209F076C080915E0290915F025A -:10453000009719F0039709F06DC08091E800877F1C -:104540008093E8008091E80082FD05C080915902C7 -:104550008111F8CF5FC08091F10080933602809185 -:10456000E8008B7753C080915A02813A09F052C01B -:1045700080915E0290915F02892B09F04BC080917F -:10458000E800877F8093E8008091E80080FFFCCFFF -:1045900080911F0136C080915A028132D9F58091F5 -:1045A0005E0290915F02892BA9F58091E800877FD8 -:1045B0008093E8000E94132580915C0280931F0184 -:1045C0000C94891580915A02813221F58091E8007E -:1045D000877F8093E8000E94132580915D0280937D -:1045E0003702089580915A02813AA1F48091E8003F -:1045F000877F8093E8008091E80080FFFCCF809166 -:1046000037028093F1008091E8008E778093E80074 -:104610000C941325089584B7877F84BF0FB6F89450 -:10462000A89580916000886180936000109260007E -:104630000FBE80E880936100109261000E947010AC -:104640000E9465250E94C2258091E20084608093CB -:10465000E20078940E9457280E94741085E191E04E -:104660000E941C1080915902853069F40E94D31C6D -:10467000809157028823B1F30E94BA1C882391F3DA -:104680000E94BE23EFCF0E9482100E94A70FEACFA4 -:104690000C944A23292F332723303105C9F060F4C5 -:1046A0002130310581F02230310509F047C08DE617 -:1046B00090E022EC33E046C02132310511F1223284 -:1046C000310561F13BC082E190E02FE234E03AC075 -:1046D00099278130910561F040F08230910559F0C1 -:1046E000039761F5ECE9F3E008C0EEEBF3E005C0F9 -:1046F000E0EBF3E002C0E2EAF3E0849190E09F0196 -:1047000021C064307105D0F4660F771FFB01E75CB0 -:10471000FE4F2081318189E090E014C06430710542 -:1047200068F4FB01EE0FFF1FEF5CFE4F208131812B -:10473000FB01E35DFE4F808190E004C080E090E0EB -:1047400020E030E0FA013183208308950895CF936B -:10475000C82F0E94A623C0933802CF91089580915C -:104760005902843011F081E0089582E0089580912B -:104770003802811102C00C94AF23089580E189BDF5 -:1047800082E189BD09B400FEFDCF8091D8008F7D04 -:104790008093D8008091E00082608093E000809157 -:1047A000E00081FDFCCF0895CF92DF92EF92FF925F -:1047B0000F931F93CF93DF93EC018B017A010E943B -:1047C0003225811133C0E114F10439F0F701808101 -:1047D0009181081B190BC80FD91FC12CD12C0115B1 -:1047E000110519F18091E80085FD16C08091E8005F -:1047F0008E778093E800E114F10449F0F70180819D -:104800009181C80ED91ED182C08285E00FC00E945E -:104810003225882321F30AC089918093F100015049 -:104820001109FFEFCF1ADF0ADACF80E0DF91CF91D5 -:104830001F910F91FF90EF90DF90CF9008952091FE -:104840006002309161022617370748F06115710543 -:1048500039F42091E8002E772093E80001C0B901D7 -:10486000FC0120E06115710579F1809159028823DE -:10487000F1F18530F1F18091E80083FD3CC0809139 -:10488000E80082FD2EC08091E80080FFEBCF2091F0 -:10489000F3008091F20090E0922B6115710551F0C8 -:1048A0008830910538F421912093F100615071090D -:1048B0000196F3CF21E0089709F020E08091E8000D -:1048C0008E778093E800CECF2111CFCF0AC08091A0 -:1048D0005902882361F0853061F08091E80083FD02 -:1048E0000AC08091E80082FFF2CF80E0089582E064 -:1048F000089583E0089581E0089520916002309149 -:1049000061022617370748F06115710539F42091C7 -:10491000E8002E772093E80001C0B901FC0120E0F7 -:104920006115710591F180915902882309F440C005 -:10493000853009F43FC08091E80083FD3DC080913F -:10494000E80082FD2FC08091E80080FFE9CF209130 -:10495000F3008091F20090E0922B6115710559F0FF -:104960008830910540F424912093F10031966150F4 -:1049700071090196F2CF21E0089709F020E08091BB -:10498000E8008E778093E800CBCF2111CCCF0AC00E -:1049900080915902882361F0853061F08091E800B0 -:1049A00083FD0AC08091E80082FFF2CF80E0089585 -:1049B00082E0089583E0089581E00895982F97306C -:1049C00068F59093E900981739F07091EC00209108 -:1049D000ED005091F00003C0242F762F50E021FD10 -:1049E00002C09F5FECCF3091EB003E7F3093EB0035 -:1049F0003091ED003D7F3093ED003091EB00316060 -:104A00003093EB007093EC002093ED005093F00096 -:104A10002091EE0027FDE5CF80E008958F70809310 -:104A2000E90081E0089580915A0287FF11C08091CA -:104A3000E80082FD05C0809159028111F8CF11C0B4 -:104A40008091E8008B770BC080915902882349F050 -:104A50008091E80080FFF8CF8091E8008E77809306 -:104A6000E80008952091E4003091E50095E640913A -:104A7000EC00842F817040FF23C08091E80080FD0E -:104A80001DC080915902882399F0853099F080915A -:104A9000EB0085FD11C04091E4005091E500241722 -:104AA000350729F3915011F09A01E1CF84E0089580 -:104AB00082E0089583E0089581E0089580E00895FC -:104AC0004091E80042FFDDCF08950E94D3250E9467 -:104AD000DB25E0EEF0E0808181608083E8EDF0E0AE -:104AE00080818F77808319BCA7EDB0E08C918E7F99 -:104AF0008C9380818F7E80831092580208950F934B -:104B00001F93CF93DF930E94D3250E94DB25C8ED2E -:104B1000D0E088818F7788838881806888838881C6 -:104B20008F7D888319BC1092590210925502109201 -:104B300057021092560200EE10E0F80180818B7F40 -:104B4000808388818160888342E060E080E00E9409 -:104B5000DE24E1EEF0E080818E7F8083E2EEF0E003 -:104B6000808181608083808188608083F80180817A -:104B70008E7F8083888180618883DF91CF911F91B0 -:104B80000F910895E8EDF0E080818F7E8083E7ED5E -:104B9000F0E080818160808384E082BF81E0809347 -:104BA00058020C947F25E8EDF0E080818E7F8083B1 -:104BB0001092E20008951092DA001092E100089538 -:104BC0001F920F920FB60F9211242F933F934F9382 -:104BD0005F936F937F938F939F93AF93BF93EF9365 -:104BE000FF938091E10082FF0BC08091E20082FF81 -:104BF00007C08091E1008B7F8093E1000E945628DE -:104C00008091DA0080FF1FC08091D80080FF1BC018 -:104C10008091DA008E7F8093DA008091D90080FF46 -:104C20000DC080E189BD82E189BD09B400FEFDCFE0 -:104C300081E0809359020E94302205C019BC109275 -:104C400059020E943E228091E10080FF19C08091AC -:104C5000E20080FF15C08091E2008E7F8093E20029 -:104C60008091E20080618093E2008091D8008062B0 -:104C70008093D80019BC85E0809359020E9442229B -:104C80008091E10084FF30C08091E20084FF2CC05D -:104C900080E189BD82E189BD09B400FEFDCF80912C -:104CA000D8008F7D8093D8008091E1008F7E809323 -:104CB000E1008091E2008F7E8093E2008091E2002B -:104CC00081608093E20080915502882311F084E096 -:104CD00007C08091E30087FD02C081E001C083E04E -:104CE000809359020E9443228091E10083FF29C0F2 -:104CF0008091E20083FF25C08091E100877F80934F -:104D0000E10082E080935902109255028091E10007 -:104D10008E7F8093E1008091E2008E7F8093E2009D -:104D20008091E20080618093E20042E060E080E0F8 -:104D30000E94DE248091F00088608093F0000E9441 -:104D40004122FF91EF91BF91AF919F918F917F9100 -:104D50006F915F914F913F912F910F900FBE0F90E8 -:104D60001F9018951F920F920FB60F9211242F9338 -:104D70003F934F935F936F937F938F939F93AF93E3 -:104D8000BF93CF93DF93EF93FF93C091E900CF7070 -:104D90008091EC00D82FD17080FDD0E81092E9000E -:104DA0008091F000877F8093F00078940E94F6262F -:104DB0001092E9008091F00088608093F000CD2B84 -:104DC000CF70C093E900FF91EF91DF91CF91BF9138 -:104DD000AF919F918F917F916F915F914F913F9193 -:104DE0002F910F900FBE0F901F9018951F93CF9388 -:104DF000DF93CDB7DEB7AA970FB6F894DEBF0FBE2C -:104E0000CDBFEAE5F2E08091F100819322E0E23645 -:104E1000F207C9F70E9459228091E80083FF2EC152 -:104E200080915A0290915B02492F50E04A3051051F -:104E300008F024C1FA01E556FF4F0C94E32B8038AB -:104E400021F0823809F01AC108C080915602909171 -:104E50005702992389F082600FC080915E028F70A3 -:104E6000873008F00BC18093E9008091EB0085FB4F -:104E7000882780F91092E9009091E800977F90933D -:104E8000E8008093F1001092F100D1C0282F2D7F0F -:104E900009F0F4C0882319F0823061F0EFC08091EE -:104EA0005C02813009F0EAC0933009F080E0809321 -:104EB00057022EC080915C0281112AC080915E024F -:104EC0008F702FEF280F263008F0D8C08093E900AC -:104ED0002091EB0020FF1CC0933021F48091EB0067 -:104EE000806214C09091EB0090619093EB0021E000 -:104EF00030E0A90102C0440F551F8A95E2F74093A4 -:104F0000EA001092EA008091EB0088608093EB0049 -:104F10001092E9008091E800877F8093E8000E946A -:104F20001325ACC08111AAC010915C021F7780913B -:104F3000E3008078812B8093E3008091E800877FF5 -:104F40008093E8000E9413258091E80080FFFCCF49 -:104F50008091E30080688093E300111102C082E039 -:104F600001C083E08093590289C08058823008F0E4 -:104F700085C080915C0290915D028C3D53E0950765 -:104F800079F583E08A838AE289834FB7F894DE015A -:104F9000139620E03EE051E2E32FF0E050935700FB -:104FA000E49120FF03C0E295EF703F5FEF708E2F1A -:104FB00090E0EA3010F0C79601C0C0968D939D93A3 -:104FC0002F5F243149F74FBF8091E800877F80939E -:104FD000E8006AE270E0CE0101960E941F2416C02C -:104FE00060915E0270915F02AE014F5F5F4F0E9461 -:104FF0004823BC01892B09F441C09091E800977FB8 -:105000009093E80089819A810E947D248091E80034 -:105010008B778093E80032C0803881F58091E8007A -:10502000877F8093E800809155028093F100809102 -:10503000E8008E7772CF811121C080915C0290913F -:105040005D0299270297D4F48091E800877F8093CE -:10505000E80080915C02809355020E9413258091A4 -:105060005502811106C08091E30087FD02C081E0F6 -:1050700001C084E0809359020E9445228091E8009B -:1050800083FF0AC08091E800877F8093E8008091C9 -:10509000EB0080628093EB00AA960FB6F894DEBF17 -:1050A0000FBECDBFDF91CF911F9108950895CF938B -:1050B000809159028823A1F0C091E900CF709091AE -:1050C000EC00892F817090FD80E8C82B1092E900D8 -:1050D0008091E80083FD0E94F626CF70C093E9001E -:1050E000CF9108955058BB27AA270E948A280C9474 -:1050F000352A0E94272A38F00E942E2A20F039F4FF -:105100009F3F19F426F40C94FD290EF4E095E7FB7B -:105110000C94F729E92F0E94462A58F3BA17620720 -:1051200073078407950720F079F4A6F50C94682A94 -:105130000EF4E0950B2EBA2FA02D0B01B9019001B2 -:105140000C01CA01A0011124FF27591B99F0593FF6 -:1051500050F4503E68F11A16F040A22F232F342F3E -:105160004427585FF3CF469537952795A795F0408C -:105170005395C9F77EF41F16BA0B620B730B840BA1 -:10518000BAF09150A1F0FF0FBB1F661F771F881F59 -:10519000C2F70EC0BA0F621F731F841F48F48795B1 -:1051A00077956795B795F7959E3F08F0B0CF9395A3 -:1051B000880F08F09927EE0F9795879508950E941C -:1051C000F3280C94352A0E942E2A58F00E94272A90 -:1051D00040F029F45F3F29F00C94F72951110C9409 -:1051E000692A0C94FD290E94462A68F39923B1F399 -:1051F000552391F3951B550BBB27AA2762177307FD -:10520000840738F09F5F5F4F220F331F441FAA1F90 -:10521000A9F335D00E2E3AF0E0E832D0915050404C -:10522000E695001CCAF72BD0FE2F29D0660F771FFA -:10523000881FBB1F261737074807AB07B0E809F0E0 -:10524000BB0B802DBF01FF2793585F4F3AF09E3F65 -:10525000510578F00C94F7290C94692A5F3FE4F328 -:10526000983ED4F3869577956795B795F7959F5FA8 -:10527000C9F7880F911D9695879597F90895E1E0F4 -:10528000660F771F881FBB1F621773078407BA0753 -:1052900020F0621B730B840BBA0BEE1F88F7E095AE -:1052A000089529F416F00C94F7290C94682A0C94AC -:1052B000FD290E944E2AA8F39638A0F707F80F920E -:1052C000E8942BE33AEA48EB5FE70E94FB2A0F924F -:1052D0000F920F924DB75EB70F920E94B12AEAE487 -:1052E000F1E00E94002A4F915F91EF91FF91E595C7 -:1052F000EE1FFF1F49F0FE57E0684427EE0F441FE2 -:10530000FA95E1F74195550B0E947B2A0F9007FE15 -:105310000C946F2A08950E944E2A88F09F5798F0A7 -:10532000B92F9927B751B0F0E1F0660F771F881FAA -:10533000991F1AF0BA95C9F714C0B13091F00E94C4 -:10534000682AB1E008950C94682A672F782F88277F -:10535000B85F39F0B93FCCF3869577956795B395EB -:10536000D9F73EF490958095709561957F4F8F4F5A -:105370009F4F0895E89409C097FB3EF4909580955F -:10538000709561957F4F8F4F9F4F9923A9F0F92F0B -:1053900096E9BB279395F695879577956795B79589 -:1053A000F111F8CFFAF4BB0F11F460FF1BC06F5F6F -:1053B0007F4F8F4F9F4F16C0882311F096E911C081 -:1053C000772321F09EE8872F762F05C0662371F0A2 -:1053D00096E8862F70E060E02AF09A95660F771FB6 -:1053E000881FDAF7880F9695879597F9089597F9AA -:1053F0009F6780E870E060E008959FEF80EC08957B -:10540000DF93CF931F930F93FF92EF92DF927B0175 -:105410008C01689406C0DA2EEF010E94F82AFE0182 -:10542000E894A5912591359145915591A6F3EF0109 -:105430000E948A28FE019701A801DA9469F7DF909B -:10544000EF90FF900F911F91CF91DF91089500246D -:105450000A941616170618060906089500240A94D9 -:1054600012161306140605060895092E0394000C5F -:1054700011F4882352F0BB0F40F4BF2B11F460FFEE -:1054800004C06F5F7F4F8F4F9F4F089557FD905817 -:10549000440F551F59F05F3F71F04795880F97FBF8 -:1054A000991F61F09F3F79F08795089512161306B2 -:1054B0001406551FF2CF4695F1DF08C016161706E1 -:1054C0001806991FF1CF8695710561050894089516 -:1054D000E894BB2766277727CB0197F908959B01AE -:1054E000AC0160E070E080E89FE30C94DF280C944E -:1054F000F7290C945A2B0E944E2AD8F39923C9F30A -:10550000940F511DA3F39150504094F059F088230B -:1055100032F0660F771F881F91505040C1F79E3FB1 -:1055200051052CF7880F911D9695879597F9089549 -:105530005F3FACF0983E9CF0BB27869577956795CA -:10554000B79508F4B1609395C1F7BB0F58F711F404 -:1055500060FFE8CF6F5F7F4F8F4F9F4FE3CF0C947B -:10556000692AFA01DC01AA0FBB1F9B01AC01BF57DE -:1055700028F4222733274427507820C0B75190F4CD -:10558000AB2F0024469537952795011CA395D2F3A0 -:10559000002071F0220F331F441FB395DAF30ED0B1 -:1055A0000C94722861307105A0E88A07B94630F47E -:1055B0009B01AC016627772788279078309621F0E9 -:1055C000208331834283538308950E94F82A0C94E8 -:1055D000352A0E94272A38F00E942E2A20F095238F -:1055E00011F00C94F7290C94FD2911240C94692ACC -:1055F0000E94462A70F3959FC1F3950F50E0551F06 -:10560000629FF001729FBB27F00DB11D639FAA2717 -:10561000F00DB11DAA1F649F6627B00DA11D661F66 -:10562000829F2227B00DA11D621F739FB00DA11D87 -:10563000621F839FA00D611D221F749F3327A00D41 -:10564000611D231F849F600D211D822F762F6A2FDD -:1056500011249F5750409AF0F1F088234AF0EE0F42 -:10566000FF1FBB1F661F771F881F91505040A9F76F -:105670009E3F510580F00C94F7290C94692A5F3FF6 -:10568000E4F3983ED4F3869577956795B795F795AB -:10569000E7959F5FC1F7FE2B880F911D9695879523 -:1056A00097F908959F930E946A2B0F9007FCEE5F75 -:1056B0000C94932B9F3F31F0915020F48795779570 -:1056C0006795B795880F911D9695879597F90895D9 -:1056D0000C94FD290E944E2AD8F3E894E0E0BB2701 -:1056E0009F57F0F02AED3FE049EC06C0EE0FBB0FEC -:1056F000661F771F881F28F0B23A62077307840776 -:1057000028F0B25A620B730B840BE3959A9572F7EB -:10571000803830F49A95BB0F661F771F881FD2F729 -:1057200090480C945C2BEF93E0FF07C0A2EA2AEDAF -:105730003FE049EC5FEB0E948A280E94352A0F90D7 -:10574000039401FC9058E2E7F1E00C94A72B9F939F -:105750008F937F936F93FF93EF939B01AC010E9414 -:10576000E52AEF91FF910E94002A2F913F914F91DE -:105770005F910C94E52AAA1BBB1B51E107C0AA1F2D -:10578000BB1FA617B70710F0A61BB70B881F991FE2 -:105790005A95A9F780959095BC01CD01089597FB86 -:1057A000072E16F4009407D077FD09D00E94BB2B7A -:1057B00007FC05D03EF4909581959F4F0895709514 -:1057C00061957F4F0895EE0FFF1F0590F491E02D36 -:1057D0000994FC014150504030F001900616D1F779 -:1057E0003197CF010895882799270895F999FECF19 -:1057F00092BD81BDF89A992780B50895A6E1B0E0E1 -:1058000044E050E00C94302CA8E1B0E042E050E0DD -:105810000C94302C262FF999FECF92BD81BDF89AB9 -:10582000019700B4021639F01FBA20BD0FB6F894E4 -:10583000FA9AF99A0FBE08950396272F0E940B2C0F -:105840000E940A2C252F0E940B2C242F0C940B2C29 -:105850000196272F0E940B2C0C940A2CDC01CB0103 -:10586000FC01F999FECF06C0F2BDE1BDF89A319670 -:1058700000B40D9241505040B8F70895F894FFCF0E -:10588000010201191A1B1C1D1E1F202122E80128DC -:1058900008140A321E3E21DC21B1217B2141210165 -:1058A00097C66636323331F7F6F5943435404D36C7 -:1058B00039FD04B0047A044104D403ED0306041F47 -:0258C0000400E2 -:00000001FF diff --git a/keyboards/alpha/rules.mk b/keyboards/alpha/rules.mk index 61ea958d7e..13a720d8c1 100755 --- a/keyboards/alpha/rules.mk +++ b/keyboards/alpha/rules.mk @@ -1,46 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - # Build Options # comment out to disable the options. # diff --git a/keyboards/alu84/rules.mk b/keyboards/alu84/rules.mk index 14d3e70898..680b13dc07 100755 --- a/keyboards/alu84/rules.mk +++ b/keyboards/alu84/rules.mk @@ -1,45 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. @@ -53,4 +23,4 @@ SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality AUDIO_ENABLE ?= no -RGBLIGHT_ENABLE ?= yes \ No newline at end of file +RGBLIGHT_ENABLE ?= yes diff --git a/keyboards/amj40/rules.mk b/keyboards/amj40/rules.mk index b9f70de0f1..423e66aeef 100755 --- a/keyboards/amj40/rules.mk +++ b/keyboards/amj40/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. diff --git a/keyboards/amj60/rules.mk b/keyboards/amj60/rules.mk index 0e9f17d260..bccdd66811 100644 --- a/keyboards/amj60/rules.mk +++ b/keyboards/amj60/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. diff --git a/keyboards/amj96/rules.mk b/keyboards/amj96/rules.mk index a90f0e75a8..52f610d7d5 100644 --- a/keyboards/amj96/rules.mk +++ b/keyboards/amj96/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/amjkeyboard/amj66/rules.mk b/keyboards/amjkeyboard/amj66/rules.mk index 80734a9904..4102c0eb28 100644 --- a/keyboards/amjkeyboard/amj66/rules.mk +++ b/keyboards/amjkeyboard/amj66/rules.mk @@ -1,53 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/amjpad/rules.mk b/keyboards/amjpad/rules.mk index 853bbf956f..fe28924852 100644 --- a/keyboards/amjpad/rules.mk +++ b/keyboards/amjpad/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. diff --git a/keyboards/angel17/rules.mk b/keyboards/angel17/rules.mk index dd54bd525f..ca2563a6e2 100644 --- a/keyboards/angel17/rules.mk +++ b/keyboards/angel17/rules.mk @@ -1,27 +1,16 @@ # MCU name MCU = atmega32u4 - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/angel64/rules.mk b/keyboards/angel64/rules.mk index 06169e8df9..4242ac2eee 100644 --- a/keyboards/angel64/rules.mk +++ b/keyboards/angel64/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/at101_blackheart/rules.mk b/keyboards/at101_blackheart/rules.mk index fadff6f23b..d8cfbd289f 100644 --- a/keyboards/at101_blackheart/rules.mk +++ b/keyboards/at101_blackheart/rules.mk @@ -1,49 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = halfkay -# Boot Section Size in *bytes* -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # @@ -56,4 +23,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no -RGBLIGHT_ENABLE = no \ No newline at end of file +RGBLIGHT_ENABLE = no diff --git a/keyboards/atomic/rules.mk b/keyboards/atomic/rules.mk index 2f9e2e7132..8ccbcb11b4 100644 --- a/keyboards/atomic/rules.mk +++ b/keyboards/atomic/rules.mk @@ -1,49 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/atreus/astar/rules.mk b/keyboards/atreus/astar/rules.mk index dc6f196237..e6fef51727 100644 --- a/keyboards/atreus/astar/rules.mk +++ b/keyboards/atreus/astar/rules.mk @@ -1,58 +1,12 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 diff --git a/keyboards/atreus/teensy2/rules.mk b/keyboards/atreus/teensy2/rules.mk index 3fb7c7e5a7..ae398e2588 100644 --- a/keyboards/atreus/teensy2/rules.mk +++ b/keyboards/atreus/teensy2/rules.mk @@ -1,58 +1,12 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = halfkay - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 diff --git a/keyboards/atreus62/rules.mk b/keyboards/atreus62/rules.mk index c9edfce0af..323976c2c2 100644 --- a/keyboards/atreus62/rules.mk +++ b/keyboards/atreus62/rules.mk @@ -1,47 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/baguette/rules.mk b/keyboards/baguette/rules.mk index de88b9798b..351322b859 100644 --- a/keyboards/baguette/rules.mk +++ b/keyboards/baguette/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/bantam44/rules.mk b/keyboards/bantam44/rules.mk index cebe7f4640..a15b451f31 100644 --- a/keyboards/bantam44/rules.mk +++ b/keyboards/bantam44/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = halfkay # Build Options # comment out to disable the options. diff --git a/keyboards/bigswitch/rules.mk b/keyboards/bigswitch/rules.mk index e4e72f09a2..14cc0c85b3 100755 --- a/keyboards/bigswitch/rules.mk +++ b/keyboards/bigswitch/rules.mk @@ -1,49 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/blockey/rules.mk b/keyboards/blockey/rules.mk index cea24f8327..83bc96c11f 100644 --- a/keyboards/blockey/rules.mk +++ b/keyboards/blockey/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina # Build Options # change yes to no to disable diff --git a/keyboards/bm16a/rules.mk b/keyboards/bm16a/rules.mk index 013dac3c90..50f0ff1211 100644 --- a/keyboards/bm16a/rules.mk +++ b/keyboards/bm16a/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/bm16s/rules.mk b/keyboards/bm16s/rules.mk index f4f1dfd639..23573664db 100755 --- a/keyboards/bm16s/rules.mk +++ b/keyboards/bm16s/rules.mk @@ -1,60 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # comment out to disable the options. # @@ -69,4 +25,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no RGBLIGHT_ENABLE = yes -LAYOUTS = ortho_4x4 \ No newline at end of file +LAYOUTS = ortho_4x4 diff --git a/keyboards/boardwalk/rules.mk b/keyboards/boardwalk/rules.mk index 0a02497bc3..215dfe34ee 100644 --- a/keyboards/boardwalk/rules.mk +++ b/keyboards/boardwalk/rules.mk @@ -1,48 +1,14 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu # QMK Build Options diff --git a/keyboards/bpiphany/sixshooter/rules.mk b/keyboards/bpiphany/sixshooter/rules.mk index 5bf8d21650..ad76051eb2 100644 --- a/keyboards/bpiphany/sixshooter/rules.mk +++ b/keyboards/bpiphany/sixshooter/rules.mk @@ -1,49 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/bthlabs/geekpad/rules.mk b/keyboards/bthlabs/geekpad/rules.mk index f51259b291..e05730c69e 100644 --- a/keyboards/bthlabs/geekpad/rules.mk +++ b/keyboards/bthlabs/geekpad/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/business_card/alpha/rules.mk b/keyboards/business_card/alpha/rules.mk index 8bb38a5142..e03f942e9d 100644 --- a/keyboards/business_card/alpha/rules.mk +++ b/keyboards/business_card/alpha/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/business_card/beta/rules.mk b/keyboards/business_card/beta/rules.mk index 8bb38a5142..e03f942e9d 100644 --- a/keyboards/business_card/beta/rules.mk +++ b/keyboards/business_card/beta/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/business_card/rules.mk b/keyboards/business_card/rules.mk index d0b8a2367a..7e37685de6 100644 --- a/keyboards/business_card/rules.mk +++ b/keyboards/business_card/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/butterstick/keymaps/default/rules.mk b/keyboards/butterstick/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/keyboards/butterstick/rules.mk b/keyboards/butterstick/rules.mk index 68b117bf59..764e7d6aa2 100644 --- a/keyboards/butterstick/rules.mk +++ b/keyboards/butterstick/rules.mk @@ -1,15 +1,16 @@ # MCU name MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) - -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -DONLYQWERTY -DDEBUG_MATRIX -SRC += sten.c -EXTRAFLAGS += -flto - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu + MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) @@ -17,3 +18,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover STENO_ENABLE = yes # Needed for chording +OPT_DEFS += -DONLYQWERTY -DDEBUG_MATRIX +SRC += sten.c +EXTRAFLAGS += -flto diff --git a/keyboards/c39/rules.mk b/keyboards/c39/rules.mk index 8fcb089817..c7a902045a 100755 --- a/keyboards/c39/rules.mk +++ b/keyboards/c39/rules.mk @@ -1,50 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina # Build Options # change yes to no to disable diff --git a/keyboards/catch22/rules.mk b/keyboards/catch22/rules.mk index 2b76e465cf..227117b766 100644 --- a/keyboards/catch22/rules.mk +++ b/keyboards/catch22/rules.mk @@ -1,49 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -#OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # @@ -57,4 +24,3 @@ NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https:/ BACKLIGHT_ENABLE = no # Custom backlighting code is used, so this should not be enabled AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below RGBLIGHT_ENABLE = yes # This can be enabled if a ws2812 strip is connected to the expansion port. - diff --git a/keyboards/chimera_ergo/rules.mk b/keyboards/chimera_ergo/rules.mk index 0903e5e386..0e26588e37 100644 --- a/keyboards/chimera_ergo/rules.mk +++ b/keyboards/chimera_ergo/rules.mk @@ -1,66 +1,16 @@ - -OPT_DEFS += -DCHIMERA_ERGO_PROMICRO -CHIMERA_ERGO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) - -# # project specific files -SRC = matrix.c - - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # @@ -78,4 +28,12 @@ NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA UNICODE_ENABLE = YES # Unicode # BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID + +OPT_DEFS += -DCHIMERA_ERGO_PROMICRO +CHIMERA_ERGO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) + +# # project specific files +SRC = matrix.c + USB = /dev/ttyACM0 diff --git a/keyboards/chimera_ls/rules.mk b/keyboards/chimera_ls/rules.mk index bc3e4a865e..5060b9ebfc 100644 --- a/keyboards/chimera_ls/rules.mk +++ b/keyboards/chimera_ls/rules.mk @@ -1,66 +1,16 @@ - -OPT_DEFS += -DCHIMERA_LS_PROMICRO -CHIMERA_LS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) - -# # project specific files -SRC = matrix.c - - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # @@ -80,4 +30,11 @@ UNICODE_ENABLE = YES # Unicode USB = /dev/ttyACM0 +OPT_DEFS += -DCHIMERA_LS_PROMICRO +CHIMERA_LS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) + +# project specific files +SRC = matrix.c + LAYOUTS = ortho_4x12 diff --git a/keyboards/chimera_ortho/rules.mk b/keyboards/chimera_ortho/rules.mk index c4ff50dd2f..549f311496 100644 --- a/keyboards/chimera_ortho/rules.mk +++ b/keyboards/chimera_ortho/rules.mk @@ -1,57 +1,16 @@ - -OPT_DEFS += -DCHIMERA_ORTHO_PROMICRO -CHIMERA_ORTHO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) - -# # project specific files -SRC = matrix.c - - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # comment out to disable the options. # @@ -70,3 +29,10 @@ UNICODE_ENABLE = YES # Unicode # BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID USB = /dev/ttyACM0 + +OPT_DEFS += -DCHIMERA_ORTHO_PROMICRO +CHIMERA_ORTHO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) + +# project specific files +SRC = matrix.c diff --git a/keyboards/choco60/rules.mk b/keyboards/choco60/rules.mk index 343469db2b..65b98b73b6 100644 --- a/keyboards/choco60/rules.mk +++ b/keyboards/choco60/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/christmas_tree/keymaps/default/rules.mk b/keyboards/christmas_tree/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/keyboards/christmas_tree/rules.mk b/keyboards/christmas_tree/rules.mk index ec73e527b5..7e5269baf0 100644 --- a/keyboards/christmas_tree/rules.mk +++ b/keyboards/christmas_tree/rules.mk @@ -1,49 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/ckeys/handwire_101/rules.mk b/keyboards/ckeys/handwire_101/rules.mk index cf904d93c3..07b0c57b44 100755 --- a/keyboards/ckeys/handwire_101/rules.mk +++ b/keyboards/ckeys/handwire_101/rules.mk @@ -1,52 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/ckeys/nakey/rules.mk b/keyboards/ckeys/nakey/rules.mk index 4ba89cee4d..afd508247f 100644 --- a/keyboards/ckeys/nakey/rules.mk +++ b/keyboards/ckeys/nakey/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = halfkay # Build Options # change yes to no to disable diff --git a/keyboards/ckeys/obelus/rules.mk b/keyboards/ckeys/obelus/rules.mk index 7b556b23c0..0c55043003 100644 --- a/keyboards/ckeys/obelus/rules.mk +++ b/keyboards/ckeys/obelus/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/claw44/rules.mk b/keyboards/claw44/rules.mk index c27f399ffd..b2c3b436e9 100644 --- a/keyboards/claw44/rules.mk +++ b/keyboards/claw44/rules.mk @@ -1,54 +1,16 @@ -SRC += i2c.c -SRC += serial.c -SRC += ssd1306.c - -# if firmware size over limit, try this option -# CFLAGS += -flto - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically @@ -69,5 +31,11 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes +SRC += i2c.c +SRC += serial.c +SRC += ssd1306.c + +# if firmware size over limit, try this option +# CFLAGS += -flto DEFAULT_FOLDER = claw44/rev1 diff --git a/keyboards/clueboard/17/rules.mk b/keyboards/clueboard/17/rules.mk index 591d40f030..68274a8b23 100644 --- a/keyboards/clueboard/17/rules.mk +++ b/keyboards/clueboard/17/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) diff --git a/keyboards/clueboard/66/rev1/rules.mk b/keyboards/clueboard/66/rev1/rules.mk index 96d4125ac4..39fd55921f 100644 --- a/keyboards/clueboard/66/rev1/rules.mk +++ b/keyboards/clueboard/66/rev1/rules.mk @@ -1,10 +1,15 @@ -LAYOUTS = 66_ansi 66_iso +# MCU name MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. @@ -21,3 +26,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality MIDI_ENABLE = no # MIDI controls UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID + +LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/clueboard/66/rev2/rules.mk b/keyboards/clueboard/66/rev2/rules.mk index 4987ac1378..ec623ec63f 100644 --- a/keyboards/clueboard/66/rev2/rules.mk +++ b/keyboards/clueboard/66/rev2/rules.mk @@ -1,11 +1,15 @@ -LAYOUTS = 66_ansi 66_iso +# MCU name MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options BACKLIGHT_ENABLE = yes @@ -20,3 +24,5 @@ RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality MIDI_ENABLE = no # MIDI controls UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID + +LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/clueboard/66/rev3/rules.mk b/keyboards/clueboard/66/rev3/rules.mk index 8c1836351f..ca7817af18 100644 --- a/keyboards/clueboard/66/rev3/rules.mk +++ b/keyboards/clueboard/66/rev3/rules.mk @@ -1,10 +1,15 @@ -LAYOUTS = 66_ansi 66_iso +# MCU name MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. @@ -21,3 +26,5 @@ RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality MIDI_ENABLE = no # MIDI controls UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID + +LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/clueboard/66_hotswap/prototype/rules.mk b/keyboards/clueboard/66_hotswap/prototype/rules.mk index 887592b373..0a2a734cf5 100644 --- a/keyboards/clueboard/66_hotswap/prototype/rules.mk +++ b/keyboards/clueboard/66_hotswap/prototype/rules.mk @@ -1,11 +1,15 @@ -EXTRAFLAGS += -flto -LAYOUTS = 66_ansi +# MCU name MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. @@ -22,3 +26,6 @@ RGBLIGHT_ENABLE = yes MIDI_ENABLE = no UNICODE_ENABLE = no BLUETOOTH_ENABLE = no + +EXTRAFLAGS += -flto +LAYOUTS = 66_ansi diff --git a/keyboards/clueboard/card/rules.mk b/keyboards/clueboard/card/rules.mk index 46d6f91130..2162b25de1 100644 --- a/keyboards/clueboard/card/rules.mk +++ b/keyboards/clueboard/card/rules.mk @@ -1,9 +1,15 @@ +# MCU name MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options diff --git a/keyboards/cocoa40/keymaps/default/rules.mk b/keyboards/cocoa40/keymaps/default/rules.mk deleted file mode 100644 index 8b13789179..0000000000 --- a/keyboards/cocoa40/keymaps/default/rules.mk +++ /dev/null @@ -1 +0,0 @@ - diff --git a/keyboards/cocoa40/rules.mk b/keyboards/cocoa40/rules.mk index f7e529a4b2..ad0ffbf0fe 100644 --- a/keyboards/cocoa40/rules.mk +++ b/keyboards/cocoa40/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/comet46/rules.mk b/keyboards/comet46/rules.mk index fc00e205bf..d38f16734f 100644 --- a/keyboards/comet46/rules.mk +++ b/keyboards/comet46/rules.mk @@ -1,50 +1,15 @@ -# # project specific files -SRC += matrix.c \ - i2c.c \ - ssd1306.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -# BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina # Build Options # comment out to disable the options. @@ -64,3 +29,7 @@ UNICODE_ENABLE = YES # Unicode # BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID USB = /dev/ttyACM0 +# project specific files +SRC += matrix.c \ + i2c.c \ + ssd1306.c diff --git a/keyboards/contra/rules.mk b/keyboards/contra/rules.mk index 3a97834cff..0aded0f29a 100755 --- a/keyboards/contra/rules.mk +++ b/keyboards/contra/rules.mk @@ -1,45 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina # Build Options # change yes to no to disable diff --git a/keyboards/converter/adb_usb/rules.mk b/keyboards/converter/adb_usb/rules.mk index 7901898c7c..66ca765266 100644 --- a/keyboards/converter/adb_usb/rules.mk +++ b/keyboards/converter/adb_usb/rules.mk @@ -1,59 +1,16 @@ # MCU name -# atmega32u4 Teensy2.0 -# atemga32u4 TMK Converter rev.1 -# atemga32u2 TMK Converter rev.2 MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -# -F_CPU = 16000000 -# F_CPU = 8000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2 -# LUFA bootloader 4096 -# USBaspLoader 2048 - # Build Options # comment out to disable the options. # diff --git a/keyboards/converter/hp_46010a/rules.mk b/keyboards/converter/hp_46010a/rules.mk index 797258caf7..b23aaadeca 100644 --- a/keyboards/converter/hp_46010a/rules.mk +++ b/keyboards/converter/hp_46010a/rules.mk @@ -1,45 +1,14 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = halfkay # Build Options diff --git a/keyboards/converter/ibm_5291/rules.mk b/keyboards/converter/ibm_5291/rules.mk index 457dad1661..edb456a7d8 100644 --- a/keyboards/converter/ibm_5291/rules.mk +++ b/keyboards/converter/ibm_5291/rules.mk @@ -1,45 +1,14 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = halfkay # Build Options diff --git a/keyboards/converter/ibm_terminal/rules.mk b/keyboards/converter/ibm_terminal/rules.mk index a48038ccde..36913ef331 100644 --- a/keyboards/converter/ibm_terminal/rules.mk +++ b/keyboards/converter/ibm_terminal/rules.mk @@ -1,48 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/converter/m0110_usb/rules.mk b/keyboards/converter/m0110_usb/rules.mk index bffee05fde..36c3dfa3fd 100644 --- a/keyboards/converter/m0110_usb/rules.mk +++ b/keyboards/converter/m0110_usb/rules.mk @@ -1,59 +1,19 @@ # MCU name -# atmega32u4 Teensy2.0 -# atemga32u4 TMK Converter rev.1 -# atemga32u2 TMK Converter rev.2 MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -# -#F_CPU = 16000000 +# Processor frequency F_CPU = 8000000 -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2 -# LUFA bootloader 4096 -# USBaspLoader 2048 - # Build Options # comment out to disable the options. # diff --git a/keyboards/converter/numeric_keypad_IIe/rules.mk b/keyboards/converter/numeric_keypad_IIe/rules.mk index f61a7d4501..03c1bc8f86 100644 --- a/keyboards/converter/numeric_keypad_IIe/rules.mk +++ b/keyboards/converter/numeric_keypad_IIe/rules.mk @@ -1,59 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change yes to no to disable # diff --git a/keyboards/converter/palm_usb/rules.mk b/keyboards/converter/palm_usb/rules.mk index 7374fd955f..2cd2c47e59 100644 --- a/keyboards/converter/palm_usb/rules.mk +++ b/keyboards/converter/palm_usb/rules.mk @@ -1,11 +1,14 @@ -MCU = atmega32u4 # Teensy 2.0 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT +# MCU name +MCU = atmega32u4 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina # Build Options diff --git a/keyboards/converter/sun_usb/rules.mk b/keyboards/converter/sun_usb/rules.mk index db6b5c7ee4..60beb4d9b0 100644 --- a/keyboards/converter/sun_usb/rules.mk +++ b/keyboards/converter/sun_usb/rules.mk @@ -1,11 +1,14 @@ -MCU = atmega32u4 # Teensy 2.0 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT +# MCU name +MCU = atmega32u4 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = lufa-dfu # Build Options diff --git a/keyboards/converter/usb_usb/rules.mk b/keyboards/converter/usb_usb/rules.mk index dfe89ee7d9..b4f37d3ad8 100644 --- a/keyboards/converter/usb_usb/rules.mk +++ b/keyboards/converter/usb_usb/rules.mk @@ -1,55 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. - -# Since there are different hardware variations of these adapters and since these -# have different CPU clocks, the clock speed should be set in the rules.mk file of the -# respective hardware variantion (i.e. subproject). For example, in /pro_micro/rules.mk -# this is set to 8000000. -# The value here is only a fallback and is ignored if it is defined in the subproject. -F_CPU ?= 16000000 - -DEFAULT_FOLDER = converter/usb_usb/hasu - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # comment out to disable the options. # @@ -65,3 +26,5 @@ USB_HID_ENABLE = yes CUSTOM_MATRIX = yes SRC = custom_matrix.cpp + +DEFAULT_FOLDER = converter/usb_usb/hasu diff --git a/keyboards/converter/xt_usb/rules.mk b/keyboards/converter/xt_usb/rules.mk index 1f96251830..05b70519c7 100644 --- a/keyboards/converter/xt_usb/rules.mk +++ b/keyboards/converter/xt_usb/rules.mk @@ -1,45 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader -# This indicates which bootloader is present on the board. -# BOOTLOADER = caterina # Pro Micro -BOOTLOADER = halfkay # Teensy +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = halfkay # Build Options # comment out to disable the options. diff --git a/keyboards/copenhagen_click/click_pad_v1/rules.mk b/keyboards/copenhagen_click/click_pad_v1/rules.mk index 381604ac5b..dd7a086de8 100755 --- a/keyboards/copenhagen_click/click_pad_v1/rules.mk +++ b/keyboards/copenhagen_click/click_pad_v1/rules.mk @@ -7,20 +7,10 @@ MCU = atmega32u4 # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/coseyfannitutti/discipad/rules.mk b/keyboards/coseyfannitutti/discipad/rules.mk index 64f6188542..a9d06d608c 100644 --- a/keyboards/coseyfannitutti/discipad/rules.mk +++ b/keyboards/coseyfannitutti/discipad/rules.mk @@ -2,6 +2,13 @@ MCU = atmega328p # Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = USBasp # Flash program via avrdude, but default command is not suitable. diff --git a/keyboards/coseyfannitutti/mullet/rules.mk b/keyboards/coseyfannitutti/mullet/rules.mk index fa02fe6fce..f390cfbe09 100644 --- a/keyboards/coseyfannitutti/mullet/rules.mk +++ b/keyboards/coseyfannitutti/mullet/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/coseyfannitutti/mulletpad/rules.mk b/keyboards/coseyfannitutti/mulletpad/rules.mk index b3a473ef4b..282a4a3650 100644 --- a/keyboards/coseyfannitutti/mulletpad/rules.mk +++ b/keyboards/coseyfannitutti/mulletpad/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/cospad/rules.mk b/keyboards/cospad/rules.mk index 61c7a5182c..075320a22f 100644 --- a/keyboards/cospad/rules.mk +++ b/keyboards/cospad/rules.mk @@ -1,63 +1,16 @@ - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/crawlpad/rules.mk b/keyboards/crawlpad/rules.mk index 2dda38e201..00931610a1 100755 --- a/keyboards/crawlpad/rules.mk +++ b/keyboards/crawlpad/rules.mk @@ -1,45 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. diff --git a/keyboards/crkbd/rules.mk b/keyboards/crkbd/rules.mk index 950000a7ec..67674518d9 100644 --- a/keyboards/crkbd/rules.mk +++ b/keyboards/crkbd/rules.mk @@ -1,54 +1,16 @@ -QUANTUM_LIB_SRC += i2c.c \ - serial.c -SRC += ssd1306.c - -# if firmware size over limit, try this option -# CFLAGS += -flto - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically @@ -70,5 +32,11 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes +QUANTUM_LIB_SRC += i2c.c \ + serial.c +SRC += ssd1306.c + +# if firmware size over limit, try this option +# CFLAGS += -flto DEFAULT_FOLDER = crkbd/rev1 diff --git a/keyboards/cu24/rules.mk b/keyboards/cu24/rules.mk index 01d74ac473..fdfba55b13 100644 --- a/keyboards/cu24/rules.mk +++ b/keyboards/cu24/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/cu75/rules.mk b/keyboards/cu75/rules.mk index a84343f056..697d8d18f2 100644 --- a/keyboards/cu75/rules.mk +++ b/keyboards/cu75/rules.mk @@ -1,41 +1,14 @@ +# MCU name MCU = atmega32u4 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -SRC = ../lfkeyboards/TWIlib.c ../lfkeyboards/issi.c ../lfkeyboards/lighting.c \ No newline at end of file +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +SRC = ../lfkeyboards/TWIlib.c ../lfkeyboards/issi.c ../lfkeyboards/lighting.c diff --git a/keyboards/daisy/rules.mk b/keyboards/daisy/rules.mk index 5a7cc564c2..d2b0d7d167 100644 --- a/keyboards/daisy/rules.mk +++ b/keyboards/daisy/rules.mk @@ -1,50 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4996 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # QMK Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/dc01/arrow/rules.mk b/keyboards/dc01/arrow/rules.mk index 8426df1bd4..56a9cfc49c 100644 --- a/keyboards/dc01/arrow/rules.mk +++ b/keyboards/dc01/arrow/rules.mk @@ -1,54 +1,15 @@ -SRC += matrix.c \ - i2c_slave.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable @@ -71,3 +32,5 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in CUSTOM_MATRIX = yes # Use custom matrix +SRC += matrix.c \ + i2c_slave.c diff --git a/keyboards/dc01/left/rules.mk b/keyboards/dc01/left/rules.mk index 8a0d061953..9e34a0a808 100644 --- a/keyboards/dc01/left/rules.mk +++ b/keyboards/dc01/left/rules.mk @@ -1,54 +1,15 @@ -SRC += matrix.c \ - i2c_master.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable @@ -70,3 +31,5 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) CUSTOM_MATRIX = yes # Use custom matrix +SRC += matrix.c \ + i2c_master.c diff --git a/keyboards/dc01/numpad/rules.mk b/keyboards/dc01/numpad/rules.mk index 420534f8ca..674ef1d026 100644 --- a/keyboards/dc01/numpad/rules.mk +++ b/keyboards/dc01/numpad/rules.mk @@ -1,54 +1,15 @@ -SRC += matrix.c \ - i2c_slave.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable @@ -71,6 +32,8 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in CUSTOM_MATRIX = yes # Use custom matrix +SRC += matrix.c \ + i2c_slave.c # Community layouts supported LAYOUTS = numpad_5x4 ortho_5x4 diff --git a/keyboards/dc01/right/rules.mk b/keyboards/dc01/right/rules.mk index 8426df1bd4..56a9cfc49c 100644 --- a/keyboards/dc01/right/rules.mk +++ b/keyboards/dc01/right/rules.mk @@ -1,54 +1,15 @@ -SRC += matrix.c \ - i2c_slave.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable @@ -71,3 +32,5 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in CUSTOM_MATRIX = yes # Use custom matrix +SRC += matrix.c \ + i2c_slave.c diff --git a/keyboards/deltasplit75/rules.mk b/keyboards/deltasplit75/rules.mk index eadea18929..a976360bf1 100644 --- a/keyboards/deltasplit75/rules.mk +++ b/keyboards/deltasplit75/rules.mk @@ -1,52 +1,16 @@ -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically @@ -69,5 +33,9 @@ USE_I2C = yes SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c DEFAULT_FOLDER = deltasplit75/v2 diff --git a/keyboards/dichotomy/rules.mk b/keyboards/dichotomy/rules.mk index 1cced06478..9ab4d56922 100755 --- a/keyboards/dichotomy/rules.mk +++ b/keyboards/dichotomy/rules.mk @@ -1,56 +1,15 @@ - -OPT_DEFS += -DDICHOTOMY_PROMICRO -DICHOTOMY_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) - -# # project specific files -SRC = matrix.c - - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader - # This definition is optional, and if your keyboard supports multiple bootloaders of - # different sizes, comment this out, and the correct address will be loaded - # automatically (+60). See bootloader.mk for all options. - BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina # Build Options # comment out to disable the options. @@ -72,5 +31,12 @@ UNICODE_ENABLE = YES # Unicode USB = /dev/ttyACM0 +OPT_DEFS += -DDICHOTOMY_PROMICRO +DICHOTOMY_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) + +# # project specific files +SRC = matrix.c + #upload: build # $(DICHOTOMY_UPLOAD_COMMAND) diff --git a/keyboards/diverge3/rules.mk b/keyboards/diverge3/rules.mk index 3888ee9370..42ab5224af 100644 --- a/keyboards/diverge3/rules.mk +++ b/keyboards/diverge3/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina # Build Options # change yes to no to disable diff --git a/keyboards/divergetm2/keymaps/default/rules.mk b/keyboards/divergetm2/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/keyboards/divergetm2/rules.mk b/keyboards/divergetm2/rules.mk index f330bd7902..9a461edec9 100644 --- a/keyboards/divergetm2/rules.mk +++ b/keyboards/divergetm2/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina # Build Options # change yes to no to disable @@ -67,6 +31,3 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SPLIT_KEYBOARD = yes - -# must specify this to enable soft-reset -BOOTLOADER = caterina diff --git a/keyboards/dk60/rules.mk b/keyboards/dk60/rules.mk index c85ed9b0a6..17ee5d9618 100644 --- a/keyboards/dk60/rules.mk +++ b/keyboards/dk60/rules.mk @@ -1,9 +1,15 @@ +# MCU name MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = no # Mouse keys(+4700) diff --git a/keyboards/do60/rules.mk b/keyboards/do60/rules.mk index 7370a6262e..bd74db7f82 100644 --- a/keyboards/do60/rules.mk +++ b/keyboards/do60/rules.mk @@ -1,52 +1,15 @@ # MCU name MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# LUFA specific -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options AUDIO_ENABLE = no # Audio output on port C6 @@ -63,4 +26,4 @@ RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend UNICODE_ENABLE = no # Unicode -LAYOUTS = 60_ansi 60_hhkb 60_ansi_split_bs_rshift \ No newline at end of file +LAYOUTS = 60_ansi 60_hhkb 60_ansi_split_bs_rshift diff --git a/keyboards/doro67/multi/rules.mk b/keyboards/doro67/multi/rules.mk index ef3def96da..d719b7043f 100644 --- a/keyboards/doro67/multi/rules.mk +++ b/keyboards/doro67/multi/rules.mk @@ -6,10 +6,10 @@ MCU = atmega32u4 # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -31,4 +31,4 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -LAYOUTS = 65_ansi_blocker \ No newline at end of file +LAYOUTS = 65_ansi_blocker diff --git a/keyboards/doro67/regular/rules.mk b/keyboards/doro67/regular/rules.mk index f844f8f956..d88f6fcfe6 100644 --- a/keyboards/doro67/regular/rules.mk +++ b/keyboards/doro67/regular/rules.mk @@ -7,7 +7,8 @@ MCU = atmega32u4 # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu # Build Options @@ -31,4 +32,4 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -LAYOUTS = 65_ansi_blocker \ No newline at end of file +LAYOUTS = 65_ansi_blocker diff --git a/keyboards/doro67/rgb/rules.mk b/keyboards/doro67/rgb/rules.mk index df77b4311b..769edfb45d 100644 --- a/keyboards/doro67/rgb/rules.mk +++ b/keyboards/doro67/rgb/rules.mk @@ -1,65 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -RGB_MATRIX_ENABLE = WS2812 - - # Build Options # change yes to no to disable # @@ -80,5 +31,6 @@ BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +RGB_MATRIX_ENABLE = WS2812 -LAYOUTS = 65_ansi_blocker \ No newline at end of file +LAYOUTS = 65_ansi_blocker diff --git a/keyboards/dozen0/rules.mk b/keyboards/dozen0/rules.mk index bc370be039..7218e1e1bf 100644 --- a/keyboards/dozen0/rules.mk +++ b/keyboards/dozen0/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/dp60/keymaps/via/rules.mk b/keyboards/dp60/keymaps/via/rules.mk index d532fc4559..27d6223bae 100644 --- a/keyboards/dp60/keymaps/via/rules.mk +++ b/keyboards/dp60/keymaps/via/rules.mk @@ -11,7 +11,6 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # LUFA bootloader 4096 # USBaspLoader 2048 BOOTLOADER = atmel-dfu -#OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating @@ -45,4 +44,4 @@ DYNAMIC_KEYMAP_ENABLE = yes CUSTOM_MATRIX = yes SRC += matrix.c keyboards/wilba_tech/wt_main.c -#keyboards/stm60/webusb.c \ No newline at end of file +#keyboards/stm60/webusb.c diff --git a/keyboards/dp60/rules.mk b/keyboards/dp60/rules.mk index 1404ab7b32..0f998746fb 100644 --- a/keyboards/dp60/rules.mk +++ b/keyboards/dp60/rules.mk @@ -1,17 +1,15 @@ # MCU name MCU = atmega32u4 -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu -#OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating @@ -42,4 +40,4 @@ RGB_MATRIX_ENABLE = yes # Use RGB matrix LAYOUTS = 60_ansi 60_hhkb 60_iso 60_ansi_split_bs_rshift CUSTOM_MATRIX = yes -SRC += matrix.c \ No newline at end of file +SRC += matrix.c diff --git a/keyboards/duck/eagle_viper/v2/rules.mk b/keyboards/duck/eagle_viper/v2/rules.mk index 1abd7d9413..9b3ffa8ac5 100644 --- a/keyboards/duck/eagle_viper/v2/rules.mk +++ b/keyboards/duck/eagle_viper/v2/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/duck/jetfire/rules.mk b/keyboards/duck/jetfire/rules.mk index dceddc7c7d..04d4f45695 100644 --- a/keyboards/duck/jetfire/rules.mk +++ b/keyboards/duck/jetfire/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/duck/lightsaver/rules.mk b/keyboards/duck/lightsaver/rules.mk index bc7b901b49..b6cb462ebb 100644 --- a/keyboards/duck/lightsaver/rules.mk +++ b/keyboards/duck/lightsaver/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/duck/octagon/v1/rules.mk b/keyboards/duck/octagon/v1/rules.mk index 889b93ed45..7027fb1276 100644 --- a/keyboards/duck/octagon/v1/rules.mk +++ b/keyboards/duck/octagon/v1/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/duck/octagon/v2/rules.mk b/keyboards/duck/octagon/v2/rules.mk index c403247074..cd4d2c2fec 100644 --- a/keyboards/duck/octagon/v2/rules.mk +++ b/keyboards/duck/octagon/v2/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/dumbpad/rules.mk b/keyboards/dumbpad/rules.mk index 5d585c65be..a5df407da4 100644 --- a/keyboards/dumbpad/rules.mk +++ b/keyboards/dumbpad/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/dz60/keymaps/LEdiodes/rules.mk b/keyboards/dz60/keymaps/LEdiodes/rules.mk index 08adc989df..38b067eb0f 100644 --- a/keyboards/dz60/keymaps/LEdiodes/rules.mk +++ b/keyboards/dz60/keymaps/LEdiodes/rules.mk @@ -1,46 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # @@ -55,4 +12,4 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no RGBLIGHT_ENABLE = yes AUTO_SHIFT_ENABLE = yes # If the time depressed is greater than or equal to the AUTO_SHIFT_TIMEOUT, then a shifted version of the key is emitted. If the time is less than the AUTO_SHIFT_TIMEOUT time, then the normal state is emitted -TAP_DANCE_ENABLE = yes \ No newline at end of file +TAP_DANCE_ENABLE = yes diff --git a/keyboards/dz60/rules.mk b/keyboards/dz60/rules.mk index 33beea728c..d2faa99897 100644 --- a/keyboards/dz60/rules.mk +++ b/keyboards/dz60/rules.mk @@ -1,42 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -BOOTLOADER=atmel-dfu +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. diff --git a/keyboards/eco/rules.mk b/keyboards/eco/rules.mk index e2cebaf97d..4fe5ec1b92 100644 --- a/keyboards/eco/rules.mk +++ b/keyboards/eco/rules.mk @@ -1,47 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/emptystring/NQG/rules.mk b/keyboards/emptystring/NQG/rules.mk index 9a46bb8544..8ebed340ad 100644 --- a/keyboards/emptystring/NQG/rules.mk +++ b/keyboards/emptystring/NQG/rules.mk @@ -1,50 +1,15 @@ # MCU name - MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/ep/40/rules.mk b/keyboards/ep/40/rules.mk index 9ddf9717e9..7e69544cf4 100644 --- a/keyboards/ep/40/rules.mk +++ b/keyboards/ep/40/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/ep/96/rules.mk b/keyboards/ep/96/rules.mk index 9ddf9717e9..7e69544cf4 100644 --- a/keyboards/ep/96/rules.mk +++ b/keyboards/ep/96/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/ep/comsn/hs68/rules.mk b/keyboards/ep/comsn/hs68/rules.mk index b7d3b9b528..2aa5671557 100644 --- a/keyboards/ep/comsn/hs68/rules.mk +++ b/keyboards/ep/comsn/hs68/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/ep/comsn/mollydooker/rules.mk b/keyboards/ep/comsn/mollydooker/rules.mk index db4f2edc0b..4ef5023dfb 100644 --- a/keyboards/ep/comsn/mollydooker/rules.mk +++ b/keyboards/ep/comsn/mollydooker/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/ep/comsn/tf_longeboye/rules.mk b/keyboards/ep/comsn/tf_longeboye/rules.mk index 195c9e5023..5360459cf7 100644 --- a/keyboards/ep/comsn/tf_longeboye/rules.mk +++ b/keyboards/ep/comsn/tf_longeboye/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/ergo42/rules.mk b/keyboards/ergo42/rules.mk index d8544d9ba0..a02e3ca74e 100644 --- a/keyboards/ergo42/rules.mk +++ b/keyboards/ergo42/rules.mk @@ -1,58 +1,16 @@ -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c \ - ssd1306.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically @@ -75,6 +33,11 @@ USE_I2C = yes SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c \ + ssd1306.c LAYOUTS = ortho_4x14 diff --git a/keyboards/ergodash/rules.mk b/keyboards/ergodash/rules.mk index 8be059d969..d57e4ce13a 100644 --- a/keyboards/ergodash/rules.mk +++ b/keyboards/ergodash/rules.mk @@ -1,21 +1,14 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -F_CPU = 16000000 - -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina # Build Options diff --git a/keyboards/ergodone/rules.mk b/keyboards/ergodone/rules.mk index 6acfaf92e9..4c2fcf1595 100644 --- a/keyboards/ergodone/rules.mk +++ b/keyboards/ergodone/rules.mk @@ -1,71 +1,15 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make = Make software. -# -# make clean = Clean out built project files. -# -# That's pretty much all you need. To compile, always go make clean, -# followed by make. -# -# For advanced users only: -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -#---------------------------------------------------------------------------- - -# # project specific files -SRC = \ - twimaster.c \ - matrix.c \ - expander.c \ - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina # Build Options # comment out to disable the options. @@ -92,4 +36,10 @@ SWAP_HANDS_ENABLE = no # Disable Onehand RGBLIGHT_ENABLE = no MIDI_ENABLE = no +# project specific files +SRC = \ + twimaster.c \ + matrix.c \ + expander.c \ + LAYOUTS = ergodox diff --git a/keyboards/ergodox_ez/rules.mk b/keyboards/ergodox_ez/rules.mk index 2882072a62..dbc35f6836 100644 --- a/keyboards/ergodox_ez/rules.mk +++ b/keyboards/ergodox_ez/rules.mk @@ -1,68 +1,16 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make = Make software. -# -# make clean = Clean out built project files. -# -# That's pretty much all you need. To compile, always go make clean, -# followed by make. -# -# For advanced users only: -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -#---------------------------------------------------------------------------- - -# # project specific files -SRC += matrix.c -QUANTUM_LIB_SRC += i2c_master.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = halfkay -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # If you have Left LEDs (see # https://geekhack.org/index.php?topic=22780.msg873819#msg873819 for # details), include the following define: @@ -86,4 +34,8 @@ RGBLIGHT_ENABLE = yes RGB_MATRIX_ENABLE = no # enable later DEBOUNCE_TYPE = eager_pr +# project specific files +SRC += matrix.c +QUANTUM_LIB_SRC += i2c_master.c + LAYOUTS = ergodox diff --git a/keyboards/ergoinu/rules.mk b/keyboards/ergoinu/rules.mk index 1797d03ccb..5c600bcd2e 100644 --- a/keyboards/ergoinu/rules.mk +++ b/keyboards/ergoinu/rules.mk @@ -1,49 +1,16 @@ -SRC += matrix.c serial.c split_util.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically @@ -66,6 +33,7 @@ USE_I2C = no # i2c is not supported SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes +SRC += matrix.c serial.c split_util.c DEFAULT_FOLDER = ergoinu diff --git a/keyboards/ergotaco/keymaps/default/rules.mk b/keyboards/ergotaco/keymaps/default/rules.mk index e394fbf1e6..870d047dc9 100644 --- a/keyboards/ergotaco/keymaps/default/rules.mk +++ b/keyboards/ergotaco/keymaps/default/rules.mk @@ -1,9 +1,3 @@ -#---------------------------------------------------------------------------- -# make ergotaco:default:dfu -# Make sure you have dfu-programmer installed! -#---------------------------------------------------------------------------- -# Firmware options - #Debug options VERBOSE = yes DEBUG_MATRIX_SCAN_RATE = no diff --git a/keyboards/ergotaco/rules.mk b/keyboards/ergotaco/rules.mk index 0af3e34740..cd8ebc58f0 100644 --- a/keyboards/ergotaco/rules.mk +++ b/keyboards/ergotaco/rules.mk @@ -1,15 +1,15 @@ -#---------------------------------------------------------------------------- -# make ergotaco:default:dfu -# Make sure you have dfu-programmer installed! -# Do not edit this file! Make a copy of keymaps/default and modify that! -#---------------------------------------------------------------------------- - -# Hardware info +# MCU name MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu -F_USB = $(F_CPU) CUSTOM_MATRIX = yes EXTRAKEY_ENABLE = yes diff --git a/keyboards/ergotravel/keymaps/default/rules.mk b/keyboards/ergotravel/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/keyboards/ergotravel/rules.mk b/keyboards/ergotravel/rules.mk index c88a7fa14f..be7c8d990f 100644 --- a/keyboards/ergotravel/rules.mk +++ b/keyboards/ergotravel/rules.mk @@ -1,47 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/espectro/rules.mk b/keyboards/espectro/rules.mk index 2c28fe8504..2d1c1eed09 100755 --- a/keyboards/espectro/rules.mk +++ b/keyboards/espectro/rules.mk @@ -1,51 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* - - # Build Options # comment out to disable the options. # diff --git a/keyboards/evil80/rules.mk b/keyboards/evil80/rules.mk index d86594f98f..683f892460 100644 --- a/keyboards/evil80/rules.mk +++ b/keyboards/evil80/rules.mk @@ -1,49 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/exclusive/e65/rules.mk b/keyboards/exclusive/e65/rules.mk index 33c015cda5..0b994a279b 100644 --- a/keyboards/exclusive/e65/rules.mk +++ b/keyboards/exclusive/e65/rules.mk @@ -2,6 +2,13 @@ MCU = atmega32u4 # Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu # Build Options diff --git a/keyboards/exclusive/e6_rgb/rules.mk b/keyboards/exclusive/e6_rgb/rules.mk index 9e4e0f58f5..4695f64760 100644 --- a/keyboards/exclusive/e6_rgb/rules.mk +++ b/keyboards/exclusive/e6_rgb/rules.mk @@ -1,53 +1,15 @@ # MCU name MCU = atmega32u4 -# project specific files -#SRC = - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu -#OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/exclusive/e6v2/le/rules.mk b/keyboards/exclusive/e6v2/le/rules.mk index ffad52dbc5..e6cad94033 100644 --- a/keyboards/exclusive/e6v2/le/rules.mk +++ b/keyboards/exclusive/e6v2/le/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/exclusive/e6v2/oe/rules.mk b/keyboards/exclusive/e6v2/oe/rules.mk index ffad52dbc5..e6cad94033 100644 --- a/keyboards/exclusive/e6v2/oe/rules.mk +++ b/keyboards/exclusive/e6v2/oe/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/exclusive/e7v1/rules.mk b/keyboards/exclusive/e7v1/rules.mk index f903df7de5..335e228bba 100644 --- a/keyboards/exclusive/e7v1/rules.mk +++ b/keyboards/exclusive/e7v1/rules.mk @@ -1,42 +1,14 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu # Build Options diff --git a/keyboards/fc660c/rules.mk b/keyboards/fc660c/rules.mk index c947947f80..18613a5917 100644 --- a/keyboards/fc660c/rules.mk +++ b/keyboards/fc660c/rules.mk @@ -1,50 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - - -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options diff --git a/keyboards/fc980c/rules.mk b/keyboards/fc980c/rules.mk index 261bb41c8f..596b96f1f4 100644 --- a/keyboards/fc980c/rules.mk +++ b/keyboards/fc980c/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - - -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. diff --git a/keyboards/felix/rules.mk b/keyboards/felix/rules.mk index b33785b64a..7371e3b1a0 100644 --- a/keyboards/felix/rules.mk +++ b/keyboards/felix/rules.mk @@ -1,52 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/fleuron/rules.mk b/keyboards/fleuron/rules.mk index 8e0b084c45..5695e68856 100644 --- a/keyboards/fleuron/rules.mk +++ b/keyboards/fleuron/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/fortitude60/rules.mk b/keyboards/fortitude60/rules.mk index 5ea1cc5a50..1fdbfb0163 100644 --- a/keyboards/fortitude60/rules.mk +++ b/keyboards/fortitude60/rules.mk @@ -1,51 +1,16 @@ -SRC += matrix.c \ - split_util.c \ - serial.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically @@ -67,5 +32,8 @@ USE_SERIAL = yes # Serial support only on fortitude60 SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes +SRC += matrix.c \ + split_util.c \ + serial.c DEFAULT_FOLDER = fortitude60/rev1 diff --git a/keyboards/four_banger/rules.mk b/keyboards/four_banger/rules.mk index 212e74059e..d37439a0f7 100644 --- a/keyboards/four_banger/rules.mk +++ b/keyboards/four_banger/rules.mk @@ -1,45 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. @@ -53,4 +23,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes \ No newline at end of file +RGBLIGHT_ENABLE = yes diff --git a/keyboards/foxlab/leaf60/hotswap/rules.mk b/keyboards/foxlab/leaf60/hotswap/rules.mk index 75ee00a1a9..6c1ec4525c 100644 --- a/keyboards/foxlab/leaf60/hotswap/rules.mk +++ b/keyboards/foxlab/leaf60/hotswap/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/foxlab/leaf60/universal/rules.mk b/keyboards/foxlab/leaf60/universal/rules.mk index a865410333..1fcd0aa22d 100644 --- a/keyboards/foxlab/leaf60/universal/rules.mk +++ b/keyboards/foxlab/leaf60/universal/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/fractal/rules.mk b/keyboards/fractal/rules.mk index 0de2a7d39f..4894f1f4d8 100755 --- a/keyboards/fractal/rules.mk +++ b/keyboards/fractal/rules.mk @@ -1,46 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/freyr/rules.mk b/keyboards/freyr/rules.mk index d017c9195f..1a00e299fa 100644 --- a/keyboards/freyr/rules.mk +++ b/keyboards/freyr/rules.mk @@ -1,27 +1,16 @@ # MCU name MCU = atmega32u4 - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # -- cgit v1.2.3 From e02383fa1ff5f4b901e2819f2e2d37bac1cabbf5 Mon Sep 17 00:00:00 2001 From: Leivince John Marte Date: Sun, 6 Oct 2019 02:17:36 +0800 Subject: [Keymap] Added KBD6X Vimwarrior HHKB TOFU Personal Keymap (#6878) * Added KBD6X Vimwarrior HHKB TOFU Personal Layout * Added Readme.md for Vimwarrior HHKB Tofu Keymap * Added DZ60 Vimwarrior WKL Tofu Keymap * Update Rename keymaps to devinceble_hhkb_tofu and devinceble_wkl_tofu * Update rules.mk Added BOOTLOADER config. --- .../dz60/keymaps/devinceble_wkl_tofu/keymap.c | 41 +++++++++++++++++ .../dz60/keymaps/devinceble_wkl_tofu/readme.md | 9 ++++ .../dz60/keymaps/devinceble_wkl_tofu/rules.mk | 1 + .../kbd6x/keymaps/devinceble_hhkb_tofu/keymap.c | 52 ++++++++++++++++++++++ .../kbd6x/keymaps/devinceble_hhkb_tofu/readme.md | 9 ++++ .../kbd6x/keymaps/devinceble_hhkb_tofu/rules.mk | 2 + 6 files changed, 114 insertions(+) create mode 100644 keyboards/dz60/keymaps/devinceble_wkl_tofu/keymap.c create mode 100644 keyboards/dz60/keymaps/devinceble_wkl_tofu/readme.md create mode 100644 keyboards/dz60/keymaps/devinceble_wkl_tofu/rules.mk create mode 100644 keyboards/kbdfans/kbd6x/keymaps/devinceble_hhkb_tofu/keymap.c create mode 100644 keyboards/kbdfans/kbd6x/keymaps/devinceble_hhkb_tofu/readme.md create mode 100644 keyboards/kbdfans/kbd6x/keymaps/devinceble_hhkb_tofu/rules.mk (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/keymaps/devinceble_wkl_tofu/keymap.c b/keyboards/dz60/keymaps/devinceble_wkl_tofu/keymap.c new file mode 100644 index 0000000000..63b86b1d27 --- /dev/null +++ b/keyboards/dz60/keymaps/devinceble_wkl_tofu/keymap.c @@ -0,0 +1,41 @@ +/* Copyright 2019 Devinceble AKA Vimwarrior + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_60_tsangan_hhkb( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \ + KC_LALT, KC_LCTL, KC_LGUI, KC_SPC, KC_RCTL, KC_RGUI, MO(2) + ), + [1] = LAYOUT_60_tsangan_hhkb( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_RGHT, KC_TRNS, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DOWN, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_60_tsangan_hhkb( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, \ + KC_CAPS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, BL_TOGG, BL_STEP, BL_ON, BL_OFF, BL_INC, BL_DEC, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/dz60/keymaps/devinceble_wkl_tofu/readme.md b/keyboards/dz60/keymaps/devinceble_wkl_tofu/readme.md new file mode 100644 index 0000000000..221ce8061e --- /dev/null +++ b/keyboards/dz60/keymaps/devinceble_wkl_tofu/readme.md @@ -0,0 +1,9 @@ +# Devinceble AKA Vimwarrior WKL Tofu Keymap + +Build Hex File: + + make dz60:devinceble_wkl_tofu + +Flash Keyboard + + make dz60:devinceble_wkl_tofu:flash diff --git a/keyboards/dz60/keymaps/devinceble_wkl_tofu/rules.mk b/keyboards/dz60/keymaps/devinceble_wkl_tofu/rules.mk new file mode 100644 index 0000000000..522abf46b1 --- /dev/null +++ b/keyboards/dz60/keymaps/devinceble_wkl_tofu/rules.mk @@ -0,0 +1 @@ +MOUSEKEY_ENABLE = yes diff --git a/keyboards/kbdfans/kbd6x/keymaps/devinceble_hhkb_tofu/keymap.c b/keyboards/kbdfans/kbd6x/keymaps/devinceble_hhkb_tofu/keymap.c new file mode 100644 index 0000000000..7fe2a9f4d3 --- /dev/null +++ b/keyboards/kbdfans/kbd6x/keymaps/devinceble_hhkb_tofu/keymap.c @@ -0,0 +1,52 @@ +/* Copyright 2019 Devinceble AKA Vimwarrior + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RCTL, MO(2), KC_RGUI + ), + [1] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_RGHT, KC_TRNS, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DOWN, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, \ + KC_CAPS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, BL_TOGG, BL_STEP, BL_ON, BL_OFF, BL_INC, BL_DEC, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} diff --git a/keyboards/kbdfans/kbd6x/keymaps/devinceble_hhkb_tofu/readme.md b/keyboards/kbdfans/kbd6x/keymaps/devinceble_hhkb_tofu/readme.md new file mode 100644 index 0000000000..ebd416aea5 --- /dev/null +++ b/keyboards/kbdfans/kbd6x/keymaps/devinceble_hhkb_tofu/readme.md @@ -0,0 +1,9 @@ +# Devinceble AKA Vimwarrior HHKB Tofu Keymap + +Build Hex File: + + make kbdfans/kbd6x:devinceble_hhkb_tofu + +Flash Keyboard + + make kbdfans/kbd6x:devinceble_hhkb_tofu:flash diff --git a/keyboards/kbdfans/kbd6x/keymaps/devinceble_hhkb_tofu/rules.mk b/keyboards/kbdfans/kbd6x/keymaps/devinceble_hhkb_tofu/rules.mk new file mode 100644 index 0000000000..23f4c56744 --- /dev/null +++ b/keyboards/kbdfans/kbd6x/keymaps/devinceble_hhkb_tofu/rules.mk @@ -0,0 +1,2 @@ +BOOTLOADER = atmel-dfu +MOUSEKEY_ENABLE = yes -- cgit v1.2.3 From b91874454d0a34335409590808c54ff062e2e3ed Mon Sep 17 00:00:00 2001 From: Colai <1r00t@users.noreply.github.com> Date: Sat, 5 Oct 2019 20:56:11 +0200 Subject: [Keymap] dz60 Iso de 5x1u split right shift (#6889) * add ISO-DE layout with 5x1u and split right shift * cleaning up * renamed readme.md and layout. added underglow * change layout name in info.json * rename readme.md * renamed layout in comment. added rgb keys to visualisation * change Layout name in dz60.h visualization --- keyboards/dz60/dz60.h | 27 ++++++ keyboards/dz60/info.json | 4 + keyboards/dz60/keymaps/iso_de_root/keymap.c | 127 +++++++++++++++++++++++++++ keyboards/dz60/keymaps/iso_de_root/readme.md | 4 + keyboards/dz60/keymaps/iso_de_root/rules.mk | 15 ++++ 5 files changed, 177 insertions(+) create mode 100644 keyboards/dz60/keymaps/iso_de_root/keymap.c create mode 100644 keyboards/dz60/keymaps/iso_de_root/readme.md create mode 100644 keyboards/dz60/keymaps/iso_de_root/rules.mk (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/dz60.h b/keyboards/dz60/dz60.h index de18faf626..172085be4f 100644 --- a/keyboards/dz60/dz60.h +++ b/keyboards/dz60/dz60.h @@ -305,6 +305,33 @@ { k40, k41, KC_NO, k43, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d, k4e } \ } +/* LAYOUT_60_iso_5x1u_split_rshift + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │10 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d │ + * │20 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d │3e │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬┴──┬───┼───┤ + * │40 │41 │43 │46 │4a │4b │4c │4d │4e │ + * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ +*/ +#define LAYOUT_60_iso_5x1u_split_rshift( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ + k10, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3e, \ + k40, k41, k43, k46, k4a, k4b, k4c, k4d, k4e \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e }, \ + { k10, KC_NO, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e }, \ + { k20, KC_NO, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, k3d, k3e }, \ + { k40, k41, KC_NO, k43, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d, k4e } \ +} + /* LAYOUT_60_iso_split * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e │ diff --git a/keyboards/dz60/info.json b/keyboards/dz60/info.json index 06ce362720..7d1717b6f2 100644 --- a/keyboards/dz60/info.json +++ b/keyboards/dz60/info.json @@ -45,6 +45,10 @@ "key_count": 63, "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"|", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"~", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Fn", "x":10, "y":4}, {"label":"←", "x":11, "y":4}, {"label":"↓", "x":12, "y":4}, {"label":"↑", "x":13, "y":4}, {"label":"→", "x":14, "y":4}] }, + "LAYOUT_60_iso_5x1u_split_rshift": { + "key_count": 64, + "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4}, {"label":"\u2190", "x":11, "y":4}, {"label":"\u2193", "x":12, "y":4}, {"label":"\u2191", "x":13, "y":4}, {"label":"\u2192", "x":14, "y":4}] + }, "LAYOUT_60_iso_split": { "key_count": 64, "layout": [{"label":"¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"label":"FN", "x":6.00, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] diff --git a/keyboards/dz60/keymaps/iso_de_root/keymap.c b/keyboards/dz60/keymaps/iso_de_root/keymap.c new file mode 100644 index 0000000000..e0d781f9a3 --- /dev/null +++ b/keyboards/dz60/keymaps/iso_de_root/keymap.c @@ -0,0 +1,127 @@ + +#include QMK_KEYBOARD_H + +// enable dynamic macro recording +enum root_keycodes { + FN_LAYR = SAFE_RANGE, + DYNAMIC_MACRO_RANGE, +}; + +enum { + DEF = 0, + FN1, + NUM, + DYN, +}; + +#include "dynamic_macro.h" + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + uint16_t macro_kc = (keycode == MO(DYN) ? DYN_REC_STOP : keycode); + + if (!process_record_dynamic_macro(macro_kc, record)) { + return false; + } + + return true; +} + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* LAYOUT_60_iso_5x1u_split_rshift + * + * DEF + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │ESC│1 │2 │3 │4 │5 │6 │7 │8 │9 │0 │ß │´ │Backspc│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │Tab │Q │W │E │R │T │Z │U │I │O │P │Ü │+ │Enter│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │ + * │MO1 │A │S │D │F │G │H │J │K │L │Ö │Ä │# │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤ + * │LSFT│< │Y │X │C │V │B │N │M │, │. │- │RShift│MO3│ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬┴──┬───┼───┤ + * │Ctrl│Win │Alt │ Space │AGr│ ← │ ↓ │ ↑ │ → │ + * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ + * + * FN1 + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │^ │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│Del │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │ │ │ │ │Rst│ │ │ │ │ │Prt│ScL│Pau│ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │ + * │ │ │ │ │ │ │ │TO2│ │ │Ins│Del│NuL│ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤ + * │LSFT│ │ │ │MPl│MSt│MPv│MNx│Mut│Vo-│Vo+│ │RShift│ │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬┴──┬───┼───┤ + * │Ctrl│Win │Alt │ Ctrl │AGr│Hom│PgD│PgU│End│ + * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ + * + * NUM + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │TO0│ │ │ │ │ │ │7 │8 │9 │ │ │ │Backspc│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │ │ │ │ │ │ │ │4 │5 │6 │ │ │ │Enter│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │ + * │ │ │ │ │ │ │ │1 │2 │3 │ │ │ │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤ + * │ │ │ │ │ │ │ │0 │0 │, │. │- │RShift│ │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬┴──┬───┼───┤ + * │ │ │ │ │AGr│ │ │ │ │ + * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ + * + * DYN + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │MSp│ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │ │RTg│RMo│RDe│RIn│ │ │ │ │ │ │ │ │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │ + * │ │HDe│HIn│SDe│SIn│ │ │ │ │ │ │ │ │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │MSp│ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬┴──┬───┼───┤ + * │ │ │ │ │ │MS1│MS2│MP1│MP2│ + * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ +*/ + +#define MacRec1 DYN_REC_START1 +#define MacRec2 DYN_REC_START2 +#define MacPla1 DYN_MACRO_PLAY1 +#define MacPla2 DYN_MACRO_PLAY2 +#define MacStop DYN_REC_STOP + + [DEF] = LAYOUT_60_iso_5x1u_split_rshift( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + MO(FN1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(DYN), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + + [FN1] = LAYOUT_60_iso_5x1u_split_rshift( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSCR, KC_SLCK, KC_PAUS, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TO(NUM), XXXXXXX, XXXXXXX, KC_INS, KC_DEL, KC_NLCK, XXXXXXX, + _______, XXXXXXX, XXXXXXX, XXXXXXX, KC_MPLY, KC_MSTP, KC_MPRV, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, KC_RSFT, XXXXXXX, + _______, _______, _______, KC_LCTL, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END + ), + + [NUM] = LAYOUT_60_iso_5x1u_split_rshift( + TO(DEF), _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, XXXXXXX, XXXXXXX, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_P4, KC_P5, KC_P6, XXXXXXX, XXXXXXX, _______, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_P1, KC_P2, KC_P3, XXXXXXX, XXXXXXX, XXXXXXX, _______, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_P0, KC_P0, _______, _______, _______, _______, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ), + + [DYN] = LAYOUT_60_iso_5x1u_split_rshift( + MacStop, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MacRec1, MacRec2, MacPla1, MacPla2 + ), +}; + diff --git a/keyboards/dz60/keymaps/iso_de_root/readme.md b/keyboards/dz60/keymaps/iso_de_root/readme.md new file mode 100644 index 0000000000..b06ad09cd4 --- /dev/null +++ b/keyboards/dz60/keymaps/iso_de_root/readme.md @@ -0,0 +1,4 @@ +# ISO DE layout + +This layout is ISO-DE and similar to a standard 60 ISO layout. The bottom right has 5x 1u keys. +Right shift is split to add a function key. diff --git a/keyboards/dz60/keymaps/iso_de_root/rules.mk b/keyboards/dz60/keymaps/iso_de_root/rules.mk new file mode 100644 index 0000000000..0dcfa1b71d --- /dev/null +++ b/keyboards/dz60/keymaps/iso_de_root/rules.mk @@ -0,0 +1,15 @@ +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = yes +AUTO_SHIFT_ENABLE = no # If the time depressed is greater than or equal to the AUTO_SHIFT_TIMEOUT, then a shifted version of the key is emitted. If the time is less than the AUTO_SHIFT_TIMEOUT time, then the normal state is emitted +TAP_DANCE_ENABLE = no -- cgit v1.2.3 From 18a0e6fedc9b88209029979f52b7952328b095fd Mon Sep 17 00:00:00 2001 From: Josh Benavides Date: Sun, 6 Oct 2019 09:24:31 +1000 Subject: [Keymap] Add HHKB-based keymap for DZ60 (#6907) * Created personal keymap for dz60 hhkb layout. * Renamed directory joooosh to joooosh_hhkb... Removed redundant KC_TRNS alias #define... Updated to use KC_TRNS alias defined in QMK_KEYBOARD_H. --- keyboards/dz60/keymaps/joooosh_hhkb/keymap.c | 49 ++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 keyboards/dz60/keymaps/joooosh_hhkb/keymap.c (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/keymaps/joooosh_hhkb/keymap.c b/keyboards/dz60/keymaps/joooosh_hhkb/keymap.c new file mode 100644 index 0000000000..05ceb27e5e --- /dev/null +++ b/keyboards/dz60/keymaps/joooosh_hhkb/keymap.c @@ -0,0 +1,49 @@ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + /* BASE LAYER + * + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \| | Del | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | + * |-----------------------------------------------------------------------------------------+ + * | LCTRL | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | LShift | Z | X | C | V | B | N | M | , | . | / | RShift | FN1 | + * |-----------------------------------------------------------------------------------------+ + * | LGUI | LAlt | Space | RAlt | RCTRL | + * `-----------------------------------------------------------------------------------------' + */ + LAYOUT_60_hhkb( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL), + + +/* FN1 LAYER + * + * ,--------------------------------------------------------------------------------------------------------------------- + * | KC_GRV | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | INSERT | RESET | + * |---------------------------------------------------------------------------------------------------------------------+ + * | RGB_TOG | _ | _ | _ | _ | _ | _ | _ | PSCR | SLCK | PAUS | UP | _ | CLR | + * |---------------------------------------------------------------------------------------------------------------------+ + * | CAPS | VOLD | VOLU | MUTE | _ | _ | PAST | PSLS | HOME | PGUP | LEFT | RIGHT | RETURN | + * |---------------------------------------------------------------------------------------------------------------------+ + * | _ | _ | _ | _ | _ | _ | PPLS | PMNS | END | PGDN | DOWN | _ | _ | + * |---------------------------------------------------------------------------------------------------------------------+ + * | _ | _ | _ | APP | _ | + * `---------------------------------------------------------------------------------------------------------------------' + */ + LAYOUT_60_hhkb( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, RESET, + RGB_TOG, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, KC_CLR, + KC_CAPS, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RIGHT, KC_RETURN, + _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, + _______, _______, _______, KC_APP, _______), +}; -- cgit v1.2.3 From d9b056486bf62f4751999d926fb3f8aad6d0c821 Mon Sep 17 00:00:00 2001 From: Jesper Nellemann Jakobsen Date: Mon, 7 Oct 2019 20:17:08 +0200 Subject: [Keymap] Move brightness controls one key over (#6945) I forgot to count the extra ISO-only key next to left shift when initially adding these brightness controls. --- keyboards/dz60/keymaps/bingocaller/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/keymaps/bingocaller/keymap.c b/keyboards/dz60/keymaps/bingocaller/keymap.c index 6b33174978..c19f673f76 100644 --- a/keyboards/dz60/keymaps/bingocaller/keymap.c +++ b/keyboards/dz60/keymaps/bingocaller/keymap.c @@ -80,7 +80,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, KC_BRMD, KC_BRMU, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_BRMD, KC_BRMU, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), // TEMPLATE -- cgit v1.2.3 From 528ddb79871b76d026c4b2ca8b1debf9feb1e751 Mon Sep 17 00:00:00 2001 From: Jono Warren <34277641+Micro-Biology@users.noreply.github.com> Date: Wed, 9 Oct 2019 23:55:27 +0100 Subject: [Keyboard] Added new layout for DZ60 and keymap (#6854) * Added new layout Added my preferred layout * Added my keymap * Update info.json Added LAYOUT_60_stand_stag_all * Update README.md Removed image from the keymap I based this layout from. * Update keyboards/dz60/keymaps/iso_vim_arrow_split_rs/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/dz60/keymaps/iso_vim_arrow_split_rs/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/dz60/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/dz60/dz60.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/dz60/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/dz60/keymaps/iso_vim_arrow_split_rs/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/dz60/dz60.h Co-Authored-By: fauxpark * Update rules.mk Removed verbose rules.mk --- keyboards/dz60/dz60.h | 27 ++++++++++++ keyboards/dz60/info.json | 6 ++- .../dz60/keymaps/iso_vim_arrow_split_rs/README.md | 3 ++ .../dz60/keymaps/iso_vim_arrow_split_rs/keymap.c | 49 ++++++++++++++++++++++ .../dz60/keymaps/iso_vim_arrow_split_rs/rules.mk | 7 ++++ 5 files changed, 91 insertions(+), 1 deletion(-) create mode 100644 keyboards/dz60/keymaps/iso_vim_arrow_split_rs/README.md create mode 100644 keyboards/dz60/keymaps/iso_vim_arrow_split_rs/keymap.c create mode 100644 keyboards/dz60/keymaps/iso_vim_arrow_split_rs/rules.mk (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/dz60.h b/keyboards/dz60/dz60.h index 172085be4f..7a5096cbfc 100644 --- a/keyboards/dz60/dz60.h +++ b/keyboards/dz60/dz60.h @@ -548,4 +548,31 @@ { k40, k41, KC_NO, k43, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, KC_NO, k4c, k4d, k4e } \ } +/* LAYOUT_60_iso_5x1u_split_bs_rshift_spc + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ + * │10 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d │ + * │20 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤ + * │30 |31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d │3e │ + * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬┴──┬───┼───┤ + * │40 │41 │43 │44 │46 │48 │4a │4b │4c │4d │4e │ + * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘ +*/ +#define LAYOUT_60_iso_5x1u_split_bs_rshift_spc( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3e, \ + k40, k41, k43, k44, k46, k48, k4a, k4b, k4c, k4d, k4e \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \ + { k10, KC_NO, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e }, \ + { k20, KC_NO, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO,k3d, k3e }, \ + { k40, k41, KC_NO, k43, k44, KC_NO, k46, KC_NO, k48, KC_NO, k4a, k4b, k4c, k4d, k4e } \ +} + #endif diff --git a/keyboards/dz60/info.json b/keyboards/dz60/info.json index 7d1717b6f2..fac53a1396 100644 --- a/keyboards/dz60/info.json +++ b/keyboards/dz60/info.json @@ -80,6 +80,10 @@ "LAYOUT_60_2_function": { "key_count": 63, "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Control", "x":11.5, "y":4, "w":1.5}, {"label":"GUI", "x":13, "y":4}, {"label":"Fn2", "x":14, "y":4}] - } + }, + "LAYOUT_60_iso_5x1u_split_bs_rshift_spc": { + "key_count": 67, + "layout": [{"label":"Esc/¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Del", "x":13, "y":0, "w":1}, {"label":"Backspace", "x":14, "y":0, "w":1}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"VolUp", "x":14, "y":3, "w":1}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6.00, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"label":"Left", "x":10, "y":4, "w":1}, {"label":"Down", "x":11, "y":4, "w":1}, {"label":"Up", "x":12, "y":4, "w":1}, {"label":"Right", "x":13, "y":4, "w":1}, {"label":"VolDown", "x":14, "y":4, "w":1}] + }, } } diff --git a/keyboards/dz60/keymaps/iso_vim_arrow_split_rs/README.md b/keyboards/dz60/keymaps/iso_vim_arrow_split_rs/README.md new file mode 100644 index 0000000000..e0fbb2dfc6 --- /dev/null +++ b/keyboards/dz60/keymaps/iso_vim_arrow_split_rs/README.md @@ -0,0 +1,3 @@ +# ISO layout with VIM style arrow cluster + +Vim arrow keys with split right shift and backspace (currently not utilised in this layout but I thought I would add it to make it easier for people to add it for their layouts). diff --git a/keyboards/dz60/keymaps/iso_vim_arrow_split_rs/keymap.c b/keyboards/dz60/keymaps/iso_vim_arrow_split_rs/keymap.c new file mode 100644 index 0000000000..8c34b606ae --- /dev/null +++ b/keyboards/dz60/keymaps/iso_vim_arrow_split_rs/keymap.c @@ -0,0 +1,49 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* + * ,-----------------------------------------------------------. + * |Esc|1 !|2 "|3 £|4 $|5 %|6 ^|7 &|8 *|9 (|0 )|- _|= +|bck|bck| + * |-----------------------------------------------------------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P |[ {|] }|Enter| + * |------------------------------------------------------. | + * | Fn1 | A | S | D | F | G | H | J | K | L |; :|' @|# ~| | + * |-----------------------------------------------------------| + * |Sft |\ || Z | X | C | V | B | N | M |, <|. >|/ ?| Caps |vU | + * |-----------------------------------------------------------| + * |Ctrl |GUI|Alt | Space |Lft|Dwn|Up |Rht|vD | + * `-----------------------------------------------------------' + */ + LAYOUT_60_iso_5x1u_split_bs_rshift_spc( +//QWERTY Base layer: +// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_CAPS, KC_VOLU, + KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_SPC, KC_NO, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_VOLD + ), + + + LAYOUT_60_iso_5x1u_split_bs_rshift_spc( +//F key layer: +// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT_60_iso_5x1u_split_bs_rshift_spc( +//Reset by holding Fn1 and Fn2 and press the D key +// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/dz60/keymaps/iso_vim_arrow_split_rs/rules.mk b/keyboards/dz60/keymaps/iso_vim_arrow_split_rs/rules.mk new file mode 100644 index 0000000000..3bfdaadaf7 --- /dev/null +++ b/keyboards/dz60/keymaps/iso_vim_arrow_split_rs/rules.mk @@ -0,0 +1,7 @@ +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no -- cgit v1.2.3 From 5156a7e05c44e996a3a9c1e590964a5c4d333dd9 Mon Sep 17 00:00:00 2001 From: noroadsleft <18669334+noroadsleft@users.noreply.github.com> Date: Thu, 10 Oct 2019 07:58:38 -0700 Subject: fix DZ60 info.json (#7000) --- keyboards/dz60/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/info.json b/keyboards/dz60/info.json index fac53a1396..c06b50709e 100644 --- a/keyboards/dz60/info.json +++ b/keyboards/dz60/info.json @@ -84,6 +84,6 @@ "LAYOUT_60_iso_5x1u_split_bs_rshift_spc": { "key_count": 67, "layout": [{"label":"Esc/¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Del", "x":13, "y":0, "w":1}, {"label":"Backspace", "x":14, "y":0, "w":1}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"VolUp", "x":14, "y":3, "w":1}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6.00, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"label":"Left", "x":10, "y":4, "w":1}, {"label":"Down", "x":11, "y":4, "w":1}, {"label":"Up", "x":12, "y":4, "w":1}, {"label":"Right", "x":13, "y":4, "w":1}, {"label":"VolDown", "x":14, "y":4, "w":1}] - }, + } } } -- cgit v1.2.3 From 094aa7c24b1d7d8fbea8404c93c2a3e99106d65b Mon Sep 17 00:00:00 2001 From: Olivierko Date: Thu, 10 Oct 2019 23:52:16 +0200 Subject: added new layout and Olivierko keymap for dz60 (#6996) * - added new layout for dz60 - created personal keymap using new layout * - changes based on pr feedback from @noroadsleft * - further readme formatting * Apply suggestions from code review applied changes based on review feedback Co-Authored-By: fauxpark * - readme formatting * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> --- keyboards/dz60/dz60.h | 26 +++++++++ keyboards/dz60/info.json | 6 ++- keyboards/dz60/keymaps/olivierko/keymap.c | 87 ++++++++++++++++++++++++++++++ keyboards/dz60/keymaps/olivierko/readme.md | 21 ++++++++ 4 files changed, 139 insertions(+), 1 deletion(-) create mode 100644 keyboards/dz60/keymaps/olivierko/keymap.c create mode 100644 keyboards/dz60/keymaps/olivierko/readme.md (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/dz60.h b/keyboards/dz60/dz60.h index 7a5096cbfc..29e57f8011 100644 --- a/keyboards/dz60/dz60.h +++ b/keyboards/dz60/dz60.h @@ -575,4 +575,30 @@ { k40, k41, KC_NO, k43, k44, KC_NO, k46, KC_NO, k48, KC_NO, k4a, k4b, k4c, k4d, k4e } \ } +/* LAYOUT_60_olivierko + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ + * │10 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │20 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d │ + * ├──────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───────┤ + * │30 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │ + * ├─────┬─┴─┬─┴───┼───┴───┴───┴───┴───┴───┴───┼───┼───┼───┬───┤ + * │40 │41 │43 │46 (7u) │4b │4c │4d │4e │ + * └─────┴───┴─────┴───────────────────────────┴───┴───┴───┴───┘ +*/ +#define LAYOUT_olivierko( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k43, k46, k4b, k4c, k4d, k4e \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \ + { k10, KC_NO, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e }, \ + { k20, KC_NO, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO }, \ + { k40, k41, KC_NO, k43, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, KC_NO, k4b, k4c, k4d, k4e } \ +} #endif diff --git a/keyboards/dz60/info.json b/keyboards/dz60/info.json index c06b50709e..b0df937977 100644 --- a/keyboards/dz60/info.json +++ b/keyboards/dz60/info.json @@ -80,10 +80,14 @@ "LAYOUT_60_2_function": { "key_count": 63, "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Control", "x":11.5, "y":4, "w":1.5}, {"label":"GUI", "x":13, "y":4}, {"label":"Fn2", "x":14, "y":4}] - }, + }, "LAYOUT_60_iso_5x1u_split_bs_rshift_spc": { "key_count": 67, "layout": [{"label":"Esc/¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Del", "x":13, "y":0, "w":1}, {"label":"Backspace", "x":14, "y":0, "w":1}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"VolUp", "x":14, "y":3, "w":1}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6.00, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"label":"Left", "x":10, "y":4, "w":1}, {"label":"Down", "x":11, "y":4, "w":1}, {"label":"Up", "x":12, "y":4, "w":1}, {"label":"Right", "x":13, "y":4, "w":1}, {"label":"VolDown", "x":14, "y":4, "w":1}] + }, + "LAYOUT_olivierko": { + "key_count": 63, + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Fn", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"label":"↑", "x":12, "y":3}, {"label":"Shift", "x":13, "y":3, "w":2}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"←", "x":11, "y":4}, {"label":"↓", "x":12, "y":4}, {"label":"→", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}] } } } diff --git a/keyboards/dz60/keymaps/olivierko/keymap.c b/keyboards/dz60/keymaps/olivierko/keymap.c new file mode 100644 index 0000000000..38d12d4d4b --- /dev/null +++ b/keyboards/dz60/keymaps/olivierko/keymap.c @@ -0,0 +1,87 @@ +#include QMK_KEYBOARD_H + +enum keyboard_layers { + _BL, + _SL, + _FL, + _CL, +}; + +enum custom_keycodes { + SWE_AA = SAFE_RANGE, + SWE_AE, + SWE_OE, +}; + +char *alt_codes[][2] = { + { + SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_2)SS_TAP(X_KP_2)SS_TAP(X_KP_9)), // Alt+0229 → å + SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_1)SS_TAP(X_KP_9)SS_TAP(X_KP_7)), // Alt+0197 → Å + }, + { + SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_2)SS_TAP(X_KP_2)SS_TAP(X_KP_8)), // Alt+0228 → ä + SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_1)SS_TAP(X_KP_9)SS_TAP(X_KP_6)), // Alt+0196 → Ä + }, + { + SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_2)SS_TAP(X_KP_4)SS_TAP(X_KP_6)), // Alt+0246 → ö + SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_2)SS_TAP(X_KP_1)SS_TAP(X_KP_4)), // Alt+0214 → Ö + }, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_BL] = LAYOUT_olivierko( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LEFT, KC_DOWN, KC_RIGHT, KC_RCTL), + + [_SL] = LAYOUT_olivierko( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, SWE_AA, KC_NO, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, SWE_OE, SWE_AE, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [_FL] = LAYOUT_olivierko( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_PAUSE, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DELETE, + KC_NO, DF(_BL), DF(_SL), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_INS, + KC_LSFT, KC_NO, KC_NO, KC_CAPS, KC_NO, KC_NO, KC_NO, KC_MUTE, KC_NO, KC_NO, KC_NO, KC_PGUP, KC_RSFT, + KC_LCTL, MO(_CL), KC_LALT, KC_MPLY, KC_HOME, KC_PGDOWN, KC_END, KC_RCTL), + + [_CL] = LAYOUT_olivierko( + RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, DEBUG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) +{ + if (!record->event.pressed) + return true; + + switch (keycode) { + case SWE_AA: + case SWE_AE: + case SWE_OE: { + uint16_t index = keycode - SWE_AA; + uint8_t shift = get_mods() & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)); + + unregister_code(KC_LSFT); + unregister_code(KC_RSFT); + + send_string(alt_codes[index][(bool)shift]); + + if (shift & MOD_BIT(KC_LSFT)) register_code(KC_LSFT); + if (shift & MOD_BIT(KC_RSFT)) register_code(KC_RSFT); + + return false; + } + default: + return true; + } +} \ No newline at end of file diff --git a/keyboards/dz60/keymaps/olivierko/readme.md b/keyboards/dz60/keymaps/olivierko/readme.md new file mode 100644 index 0000000000..54ade6d78e --- /dev/null +++ b/keyboards/dz60/keymaps/olivierko/readme.md @@ -0,0 +1,21 @@ +# DZ60 +### _BL: +Base layer with american ANSI layout. + +![_BL](https://i.imgur.com/BPMn7dk.png) +### _SL: +Swedish layer with ÅÄÖ at original positions. + +![_SL](https://i.imgur.com/I8QRh24.png) +### _FL: +Function layer including various extra keys. + +![_FL](https://i.imgur.com/nCbCIrZ.png) +### _CL: +Control layer for managing RGB and flashing. + +![_CL](https://i.imgur.com/QnoMgsb.png) +### Make command: +```sh +make dz60:olivierko:flash +``` \ No newline at end of file -- cgit v1.2.3 From 8baed70ed10fadd480511425d0f1b0bbf2d2f109 Mon Sep 17 00:00:00 2001 From: Alan Berndt Date: Sat, 19 Oct 2019 06:56:03 -0700 Subject: Add pok3r-like keymap for dz60. (#7078) * Add pok3r-like keymap for dz60. * Replace KC_TRNS with underscores --- keyboards/dz60/keymaps/pok3r/keymap.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 keyboards/dz60/keymaps/pok3r/keymap.c (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/keymaps/pok3r/keymap.c b/keyboards/dz60/keymaps/pok3r/keymap.c new file mode 100644 index 0000000000..614cb0069c --- /dev/null +++ b/keyboards/dz60/keymaps/pok3r/keymap.c @@ -0,0 +1,25 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_NO, MO(2), KC_RCTL), + + LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, + _______, KC_MPRV, KC_MPLY, KC_MNXT, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, _______, + KC_CAPS, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_DEL, _______, + _______, KC_APP, _______, _______, _______, _______, KC_END, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + + LAYOUT( + RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, _______, RGB_RMOD, RGB_MOD, _______, _______, + _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +}; -- cgit v1.2.3 From 1b06ea0c863b493215d80400f00797ceb0eabc3d Mon Sep 17 00:00:00 2001 From: Chris Alves Date: Mon, 28 Oct 2019 20:25:11 -0400 Subject: [Keymap] Added new custom keymap for the DZ60 (#6948) * Added custom dz60 keymap * Update readme.md * Updated pictures in README.md * README.md fixes * Updated mouse layout/ added ` key * Changed bkspc key to del in mod * Changed picture * Updated keymap * Removed default dz60 config.h * Updated Readme * Added Devorak Keymap * Re-added Default Config File * Updated Flash Command * Cleaned Up Custom Config File * Added Lock Security Layer * Updated Readme Picture --- keyboards/dz60/config.h | 2 +- keyboards/dz60/keymaps/chrisae9/build_flash.sh | 7 +++++ keyboards/dz60/keymaps/chrisae9/config.h | 17 +++++++++++ keyboards/dz60/keymaps/chrisae9/keymap.c | 39 ++++++++++++++++++++++++++ keyboards/dz60/keymaps/chrisae9/readme.md | 33 ++++++++++++++++++++++ 5 files changed, 97 insertions(+), 1 deletion(-) create mode 100644 keyboards/dz60/keymaps/chrisae9/build_flash.sh create mode 100644 keyboards/dz60/keymaps/chrisae9/config.h create mode 100644 keyboards/dz60/keymaps/chrisae9/keymap.c create mode 100644 keyboards/dz60/keymaps/chrisae9/readme.md (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/config.h b/keyboards/dz60/config.h index 8d66c35847..d121d997b8 100644 --- a/keyboards/dz60/config.h +++ b/keyboards/dz60/config.h @@ -43,4 +43,4 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 -#endif +#endif \ No newline at end of file diff --git a/keyboards/dz60/keymaps/chrisae9/build_flash.sh b/keyboards/dz60/keymaps/chrisae9/build_flash.sh new file mode 100644 index 0000000000..12adb8466b --- /dev/null +++ b/keyboards/dz60/keymaps/chrisae9/build_flash.sh @@ -0,0 +1,7 @@ +#OLD WAY +# dfu-programmer atmega32u4 erase --force +# dfu-programmer atmega32u4 flash /path/to/firmware.hex +# dfu-programmer atmega32u4 reset + +# run this in the qmk_firmware directory +make dz60:chrisae9:flash \ No newline at end of file diff --git a/keyboards/dz60/keymaps/chrisae9/config.h b/keyboards/dz60/keymaps/chrisae9/config.h new file mode 100644 index 0000000000..659970b72a --- /dev/null +++ b/keyboards/dz60/keymaps/chrisae9/config.h @@ -0,0 +1,17 @@ +/* chrisae9 Config */ +#pragma once + +/* Light Config */ +#undef RGBLIGHT_HUE_STEP +#define RGBLIGHT_HUE_STEP 1 +#undef RGBLIGHT_SAT_STEP +#define RGBLIGHT_SAT_STEP 8 +#undef RGBLIGHT_VAL_STEP +#define RGBLIGHT_VAL_STEP 16 + +/* Mouse Config */ +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_INTERVAL 15 +#define MOUSEKEY_TIME_TO_MAX 10 +#define MOUSEKEY_MAX_SPEED 2.5 + diff --git a/keyboards/dz60/keymaps/chrisae9/keymap.c b/keyboards/dz60/keymaps/chrisae9/keymap.c new file mode 100644 index 0000000000..f5403ff71b --- /dev/null +++ b/keyboards/dz60/keymaps/chrisae9/keymap.c @@ -0,0 +1,39 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, MO(2), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(3), KC_LEFT, KC_NO, KC_DOWN, KC_RIGHT), + LAYOUT( + KC_CAPS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_NO, KC_BSPC, + KC_TRNS, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLASH, KC_EQL, KC_TRNS, + KC_GESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, + KC_LSFT, KC_NO, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_UP, MO(2), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(3), KC_LEFT, KC_NO, KC_DOWN, KC_RIGHT), + + LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + TG(4), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RSFT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, TG(1), TG(1), TG(1), MO(3), KC_RALT, KC_NO, KC_RGUI, KC_RCTL), + + LAYOUT( + KC_PWR, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BRID, KC_BRIU, KC_NO, KC_PSCR, + KC_TRNS, KC_PGUP, KC_MS_U, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, + KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_MPLY, + KC_TRNS, KC_NO, RGB_M_P, RGB_M_B, KC_BTN3, KC_BTN4, KC_BTN5, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, RGB_SAI, RGB_TOG, + KC_TRNS, KC_TRNS, KC_MS_BTN2, KC_MS_BTN1, KC_MS_BTN1, KC_MS_BTN1, KC_TRNS, RGB_HUD, KC_NO, RGB_SAD, RGB_HUI), + + LAYOUT( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + TG(4), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), + +}; diff --git a/keyboards/dz60/keymaps/chrisae9/readme.md b/keyboards/dz60/keymaps/chrisae9/readme.md new file mode 100644 index 0000000000..1057b58adb --- /dev/null +++ b/keyboards/dz60/keymaps/chrisae9/readme.md @@ -0,0 +1,33 @@ +# Chris' DZ60 Layout + +This is a custom keymap for the layout of the DZ60. + +## Keyboard Picture + +![Keyboard Picture](https://i.imgur.com/AKDKAXN.png) + +## Keyboard Layout + +![Chris DZ60](https://i.imgur.com/Z8XDwiI.png) + +## Setup + +[QMK Tookbox Download](https://github.com/qmk/qmk_toolbox/releases/tag/0.0.13) + +[MYSYS2 for Windows](http://www.msys2.org/) + +``` bash +#After downloading +pacman -Syu +#Close and re-open +pacman -Su +pacman -S git + +#Clone this repo and run this command in directory +util/qmk_install.sh +``` + +``` bash +#From the qmk_firware directory run +make dz60:chrisae9:flash +``` -- cgit v1.2.3 From 54d8251f6f82886c0a83d76d2ecb8bee930611c4 Mon Sep 17 00:00:00 2001 From: tarnjotsingh <26198161+tarnjotsingh@users.noreply.github.com> Date: Sun, 10 Nov 2019 21:45:03 +0000 Subject: [Keymap] UK ISO keymap for DZ60 (#7322) * New custom ISO keymap for DZ60 * New custom ISO keymap for DZ60 * Adding relative path for keymap image * Removed reference to PNG and updated the README accordingly. * Improving on the README some more after reading up on the guidelines for keymaps --- keyboards/dz60/keymaps/tarnjotsingh/keymap.c | 7 +++++++ keyboards/dz60/keymaps/tarnjotsingh/layers.json | 1 + keyboards/dz60/keymaps/tarnjotsingh/readme.md | 24 ++++++++++++++++++++++++ 3 files changed, 32 insertions(+) create mode 100644 keyboards/dz60/keymaps/tarnjotsingh/keymap.c create mode 100644 keyboards/dz60/keymaps/tarnjotsingh/layers.json create mode 100644 keyboards/dz60/keymaps/tarnjotsingh/readme.md (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/keymaps/tarnjotsingh/keymap.c b/keyboards/dz60/keymaps/tarnjotsingh/keymap.c new file mode 100644 index 0000000000..a6de97fdba --- /dev/null +++ b/keyboards/dz60/keymaps/tarnjotsingh/keymap.c @@ -0,0 +1,7 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_60_iso(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RGUI, KC_LALT, KC_RCTL), + [1] = LAYOUT_60_iso(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_MUTE, KC_VOLU, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_INS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MRWD, KC_MFFD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_HOME, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS), + [2] = LAYOUT_60_iso(KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/dz60/keymaps/tarnjotsingh/layers.json b/keyboards/dz60/keymaps/tarnjotsingh/layers.json new file mode 100644 index 0000000000..7fec50a1d0 --- /dev/null +++ b/keyboards/dz60/keymaps/tarnjotsingh/layers.json @@ -0,0 +1 @@ +[["KC_ESC", "KC_1", "KC_2", "KC_3", "KC_4", "KC_5", "KC_6", "KC_7", "KC_8", "KC_9", "KC_0", "KC_MINS", "KC_EQL", "KC_BSPC", "KC_TAB", "KC_Q", "KC_W", "KC_E", "KC_R", "KC_T", "KC_Y", "KC_U", "KC_I", "KC_O", "KC_P", "KC_LBRC", "KC_RBRC", "KC_CAPS", "KC_A", "KC_S", "KC_D", "KC_F", "KC_G", "KC_H", "KC_J", "KC_K", "KC_L", "KC_SCLN", "KC_QUOT", "KC_NUHS", "KC_ENT", "KC_LSFT", "KC_NUBS", "KC_Z", "KC_X", "KC_C", "KC_V", "KC_B", "KC_N", "KC_M", "KC_COMM", "KC_DOT", "KC_SLSH", "KC_RSFT", "KC_LCTL", "KC_LGUI", "KC_LALT", "KC_SPC", "MO(1)", "KC_RGUI", "KC_LALT", "KC_RCTL"], ["KC_GRV", "KC_F1", "KC_F2", "KC_F3", "KC_F4", "KC_F5", "KC_F6", "KC_F7", "KC_F8", "KC_F9", "KC_F10", "KC_F11", "KC_F12", "KC_DEL", "KC_TRNS", "KC_MUTE", "KC_VOLU", "KC_MPLY", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_UP", "KC_PSCR", "KC_SLCK", "KC_PAUS", "KC_TRNS", "KC_TRNS", "KC_VOLD", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_PGUP", "KC_LEFT", "KC_DOWN", "KC_RGHT", "KC_TRNS", "KC_INS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_MRWD", "KC_MFFD", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_PGDN", "KC_HOME", "KC_END", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "MO(2)", "KC_TRNS"], ["KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "RGB_TOG", "RGB_MOD", "RGB_HUI", "RGB_HUD", "RGB_SAI", "RGB_SAD", "RGB_VAI", "RGB_VAD", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "BL_DEC", "BL_TOGG", "BL_INC", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS"]] \ No newline at end of file diff --git a/keyboards/dz60/keymaps/tarnjotsingh/readme.md b/keyboards/dz60/keymaps/tarnjotsingh/readme.md new file mode 100644 index 0000000000..c544269663 --- /dev/null +++ b/keyboards/dz60/keymaps/tarnjotsingh/readme.md @@ -0,0 +1,24 @@ +# DZ60 ISO Keymap + +Custom keymap for UK ISO keyboard layouts. +This includes 3 different layers. + +- Layer 0: + - Standard ISO layout with main modifier key, for accessing layer 1, to the right of the space bar. +- Layer 1: + - Layer that gives you access to pretty much everything else like the arrow keys. +- Layer 2; + - Standalone layer only for modifying the lighting on the board. Keys for this purpose are mapped in the locations used by the default dz60 layout. + - You can access this layer by holding MO(1) (next to the space bar) followed by holding MO(2) which where the Left Alt key is positioned. + +![dz60-iso-keymap](https://i.imgur.com/UV0t6aL.png) + +Make the kaymap for this keyboard (after setting up your build environment): + + make dz60:tarnjotsingh + +Then flash it by running: + + make dz60:tarnjotsingh:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3 From 6449bd25518b8d6e44040ae709ff6f51b7db5433 Mon Sep 17 00:00:00 2001 From: Calvin Moody Date: Wed, 13 Nov 2019 02:10:54 -0500 Subject: [Keymap] update calbatr0ss layout (#7342) --- keyboards/dz60/keymaps/calbatr0ss/keymap.c | 60 +++++++++++++++--------------- 1 file changed, 30 insertions(+), 30 deletions(-) (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/keymaps/calbatr0ss/keymap.c b/keyboards/dz60/keymaps/calbatr0ss/keymap.c index 2852b4a207..89f4418b1d 100644 --- a/keyboards/dz60/keymaps/calbatr0ss/keymap.c +++ b/keyboards/dz60/keymaps/calbatr0ss/keymap.c @@ -11,16 +11,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ CTRL │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ ENTER │ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ * │ SHIFT │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ SHIFT│LYR│ - * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬────┬┴───┤ - * │CAPS│ OS │ ALT│ SPACE │ FN │ SPACE │ ALT│ OS │MENU│CTRL│ - * └────┴────┴────┴────────┴────┴──────────┴────┴────┴────┴────┘ + * ├────┬───┴┬──┴─┬─┴───┴───┴┬──┴─┬─┴───┴──┬┴───┼───┴┬────┬┴───┤ + * │CAPS│ ALT│ OS │ SPACE │ FN │ SPACE │ OS │ ALT│MENU│CTRL│ + * └────┴────┴────┴──────────┴────┴────────┴────┴────┴────┴────┘ */ LAYOUT_60_calbatr0ss( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(3), - KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, MO(2), KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL), + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(3), + KC_CAPS, KC_LALT, KC_LGUI, KC_SPC, MO(2), KC_SPC, KC_RGUI, KC_RALT, KC_APP, KC_RCTL), /* LAYER 1 * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ @@ -31,54 +31,54 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ CTRL │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ ENTER │ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ * │ SHIFT │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ SHIFT│LYR│ - * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬────┬┴───┤ - * │CAPS│ ALT│ OS │ SPACE │ FN │ SPACE │ OS │ ALT│MENU│CTRL│ - * └────┴────┴────┴────────┴────┴──────────┴────┴────┴────┴────┘ + * ├────┬───┴┬──┴─┬─┴───┴───┴┬──┴─┬─┴───┴──┬┴───┼───┴┬────┬┴───┤ + * │CAPS│ OS │ ALT│ SPACE │ FN │ SPACE │ ALT│ OS │MENU│CTRL│ + * └────┴────┴────┴──────────┴────┴────────┴────┴────┴────┴────┘ */ LAYOUT_60_calbatr0ss( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(3), - KC_CAPS, KC_LALT, KC_LGUI, KC_SPC, MO(2), KC_SPC, KC_RGUI, KC_RALT, KC_APP, KC_RCTL), + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(3), + KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, MO(2), KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL), /* LAYER 2 * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ * │ │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ │ │ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ - * │ │ │ │ │ │ │ │PDN│ UP│PUP│ │ │ │ DEL │ + * │ │RGB│ │ │ │ │ │PDN│ UP│PUP│ │ │ │ DEL │ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ * │ │ │ │ │ │ │HOM│LFT│DWN│RHT│END│ │ │ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ * │ │ │ │ │ │VDN│VUP│MUT│PRV│NXT│PLY│ │ │ - * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬────┬┴───┤ - * │RSET│ │ │ │ │ │ │ │ │ │ - * └────┴────┴────┴────────┴────┴──────────┴────┴────┴────┴────┘ + * ├────┬───┴┬──┴─┬─┴───┴───┴┬──┴─┬─┴───┴──┬┴───┼───┴┬────┬┴───┤ + * │RSET│ │ │ │ │ │ │ │ │ │ + * └────┴────┴────┴──────────┴────┴────────┴────┴────┴────┴────┘ */ LAYOUT_60_calbatr0ss( KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_UP, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, + KC_TRNS, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_UP, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPRV, KC_MNXT, KC_MPLY, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), /* LAYER 3 * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ - * │ │WIN│MAC│ │ │ │ │ │ │ │ │ │ │ │ │ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ - * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * │ │ │WIN│ │ │ │ │ │ │ │ │ │ │ │ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ * │ │ │ │ │ │ │ │ │ │ │ │ │ │ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ - * │ │ │ │ │ │ │ │ │ │ │ │ │ │ - * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬────┬┴───┤ - * │ │ │ │ │ │ │ │ │ │ │ - * └────┴────┴────┴────────┴────┴──────────┴────┴────┴────┴────┘ + * │ │ │ │ │ │ │ │MAC│ │ │ │ │ │ + * ├────┬───┴┬──┴─┬─┴───┴───┴┬──┴─┬─┴───┴──┬┴───┼───┴┬────┬┴───┤ + * │ │ │ │ │ │ │ │ │ │ │ + * └────┴────┴────┴──────────┴────┴────────┴────┴────┴────┴────┘ */ LAYOUT_60_calbatr0ss( - KC_TRNS, DF(0), DF(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, DF(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, DF(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) }; -- cgit v1.2.3 From 1b2e666490bc8fcfe50a52869df7cd1de7e5aac1 Mon Sep 17 00:00:00 2001 From: Luiz Correia Date: Wed, 13 Nov 2019 18:48:32 -0300 Subject: [Keyboard] Added abnt2 layout to dz60 (#7340) * [keymap] Added abnt2 format to dz60 * [layout] added LAYOUT_60_iso_abnt2 to dz60 * Fix error: macro passed 63 arguments & takes 62 * Change BR_QUOTE to KC_GRV * Clean dz60.h * Apply suggestions from code review Accepted suggested from noroadsleft * Applied suggested changes * Update info.js with abnt2 layout * Update keyboards/dz60/info.json * Update keyboards/dz60/info.json * Rename the keymap to default_abnt2 --- keyboards/dz60/dz60.h | 27 +++++++++++ keyboards/dz60/info.json | 6 ++- keyboards/dz60/keymaps/default_abnt2/keymap.c | 67 ++++++++++++++++++++++++++ keyboards/dz60/keymaps/default_abnt2/readme.md | 15 ++++++ 4 files changed, 114 insertions(+), 1 deletion(-) create mode 100644 keyboards/dz60/keymaps/default_abnt2/keymap.c create mode 100644 keyboards/dz60/keymaps/default_abnt2/readme.md (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/dz60.h b/keyboards/dz60/dz60.h index 29e57f8011..1d0c921935 100644 --- a/keyboards/dz60/dz60.h +++ b/keyboards/dz60/dz60.h @@ -278,6 +278,33 @@ { k40, k41, KC_NO, k43, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, KC_NO, k4d, k4e } \ } +/* LAYOUT_60_abnt2 + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │10 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d │ + * │20 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │ 3d │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬──┴─┬────┤ + * │40 │41 │43 │46 │4a │4b │4d │4e │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ +*/ +#define LAYOUT_60_abnt2( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ + k10, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k43, k46, k4a, k4b, k4d, k4e \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e }, \ + { k10, KC_NO, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e }, \ + { k20, KC_NO, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO }, \ + { k40, k41, KC_NO, k43, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, KC_NO, k4d, k4e } \ +} + /* LAYOUT_60_iso_5x1u * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e │ diff --git a/keyboards/dz60/info.json b/keyboards/dz60/info.json index b0df937977..49efeba066 100644 --- a/keyboards/dz60/info.json +++ b/keyboards/dz60/info.json @@ -88,6 +88,10 @@ "LAYOUT_olivierko": { "key_count": 63, "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Fn", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"label":"↑", "x":12, "y":3}, {"label":"Shift", "x":13, "y":3, "w":2}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"←", "x":11, "y":4}, {"label":"↓", "x":12, "y":4}, {"label":"→", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}] - } + }, + "LAYOUT_60_abnt2": { + "key_count": 63, + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"\u00a8", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"`", "x":11.5, "y":1}, {"label":"{", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":"\u00c7", "x":10.75, "y":2}, {"label":"^", "x":11.75, "y":2}, {"label":"}", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":":", "x":11.25, "y":3}, {"label":"?", "x":12.25, "y":3}, {"label":"Shift", "x":13.25, "y":3, "w":1.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] + } } } diff --git a/keyboards/dz60/keymaps/default_abnt2/keymap.c b/keyboards/dz60/keymaps/default_abnt2/keymap.c new file mode 100644 index 0000000000..d6273780f1 --- /dev/null +++ b/keyboards/dz60/keymaps/default_abnt2/keymap.c @@ -0,0 +1,67 @@ +/* Copyright 2019 Luiz Correia + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "keymap_br_abnt2.h" + +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * _______ can be used in place of KC_TRNS (transparent) * + * XXXXXXX can be used in place of KC_NO (No Operation) * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +enum layer_names { + _BL, + _FL, + _CL, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0 (BR ABNT2 Layout shown) + * ,-----------------------------------------------------------. + * |Esc|1 !|2 @|3 #|4 $|5 %|6 ¨|7 &|8 *|9 (|0 )|- _|= +| Bksp | + * |-----------------------------------------------------------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P |' `|{ [|Enter| + * |------------------------------------------------------. | + * | Fn1 | A | S | D | F | G | H | J | K | L | Ç |^ ~|} ]| | + * |-----------------------------------------------------------| + * |Sft |\ || Z | X | C | V | B | N | M |, <|. >|; :|/ ?|Shift | + * |-----------------------------------------------------------| + * |Ctrl |GUI|Alt | Space |Alt |GUI|Fn2|Ctrl | + * `-----------------------------------------------------------' + */ + [_BL] = LAYOUT_60_abnt2( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, BR_ACUT, BR_LBRC, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, BR_CCDL, BR_TILD, BR_RBRC, KC_ENT, + KC_LSFT, BR_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, BR_SCLN, BR_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL), + + + [_FL] = LAYOUT_60_abnt2( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, BL_DEC, BL_TOGG, BL_INC, BL_STEP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_LCTL, KC_LGUI, KC_LGUI, XXXXXXX, KC_RALT, KC_RGUI, _______, KC_RCTL), + + [_CL] = LAYOUT_60_abnt2( + KC_GRV, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DEL, + XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX), + +}; diff --git a/keyboards/dz60/keymaps/default_abnt2/readme.md b/keyboards/dz60/keymaps/default_abnt2/readme.md new file mode 100644 index 0000000000..e1a8f82d2c --- /dev/null +++ b/keyboards/dz60/keymaps/default_abnt2/readme.md @@ -0,0 +1,15 @@ +# BR ABNT2 layout + +This is a Brazilian ABNT2 keymap for the DZ60 in a standard layout. + +The top-left sends Escape normally, but becomes a quote key when +tapped whilst either Fn or GUI are held down. + +## Layout Image + +![Layout Image](http://s2.glbimg.com/hlQMZ_E87B3DB_96rVuO_pY2Yy8=/695x0/s.glbimg.com/po/tt2/f/original/2016/06/21/900px-kb_portuguese_brazilsvg_.png) + +---- +### References + +1. [Grave Escape - QMK Firmware Documentation](https://docs.qmk.fm/#/feature_grave_esc) -- cgit v1.2.3 From 28d3f03e431f368fdae83a16b868b3102cc56927 Mon Sep 17 00:00:00 2001 From: Daniel Barber Date: Wed, 13 Nov 2019 22:26:40 -0500 Subject: Add my custom layouts for GH60, DZ60 and Minivan (#7278) Co-Authored-By: fauxpark --- keyboards/dz60/keymaps/danbee/keymap.c | 67 ++++++++++++++++++++++ keyboards/dz60/keymaps/danbee/rules.mk | 2 + keyboards/gh60/revc/keymaps/danbee/keymap.c | 67 ++++++++++++++++++++++ keyboards/gh60/revc/keymaps/danbee/rules.mk | 2 + .../minivan/keymaps/danbee/keymap.c | 62 ++++++++++++++++++++ .../minivan/keymaps/danbee/rules.mk | 2 + 6 files changed, 202 insertions(+) create mode 100644 keyboards/dz60/keymaps/danbee/keymap.c create mode 100644 keyboards/dz60/keymaps/danbee/rules.mk create mode 100644 keyboards/gh60/revc/keymaps/danbee/keymap.c create mode 100644 keyboards/gh60/revc/keymaps/danbee/rules.mk create mode 100644 keyboards/thevankeyboards/minivan/keymaps/danbee/keymap.c create mode 100644 keyboards/thevankeyboards/minivan/keymaps/danbee/rules.mk (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/keymaps/danbee/keymap.c b/keyboards/dz60/keymaps/danbee/keymap.c new file mode 100644 index 0000000000..814be29298 --- /dev/null +++ b/keyboards/dz60/keymaps/danbee/keymap.c @@ -0,0 +1,67 @@ +#include QMK_KEYBOARD_H + +enum layer_names { + _QW, + _L1, + _L2, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + /*┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Bcksp │ + ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ Ent │ + ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │ + │ Ctrl │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ \ │ │ + ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ + │Shft│ ` │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ + ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + │ Fn │Alt │Cmd │ Space │Cmd │Hypr│Ctrl│Fn 2│ + └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘*/ + [_QW] = LAYOUT_60_iso( /* Layer 0: Qwerty */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + MO(_L1), KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_HYPR, KC_RCTL, MO(_L2) + ), + /* 1: fn */ + /*┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + │ § │Br-│Br+│ │ │BL-│BL+│Pre│Pau│Nxt│Mut│Vo-│Vo+│ Del │ + ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ Ins │ + ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │ + │ │ │ │ │ │ │ ◀ │ ▼ │ ▲ │ ▶ │ │ │ │ │ + ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ + │ │ │ │ │ │ │BL~│ │ │ │ │ │ │ + ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + │ │ │ │ │ │ │ │ │ + └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘*/ + [_L1] = LAYOUT_60_iso( /* Layer 1: Functions */ + KC_NUBS, KC_BRID, KC_BRIU, _______, _______, BL_DEC, BL_INC, KC_MRWD, KC_MPLY, KC_MFFD, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_INS, + _______, _______, _______, _______, _______, _______, BL_TOGG, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + /* 2: fn 2 */ + /*┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + │Pwr│F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ Eject │ + ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │ + │ Caps │ │ │ │ │ │Hom│PgD│PgU│End│ │ │ │ │ + ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ + │ │ │ │ │ │ │Rst│ │ │ │ │ │ │ + ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + │ │ │ │ │ │ │ │ │ + └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘*/ + [_L2] = LAYOUT_60_iso( /* Layer 2: Functions */ + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_EJCT, + _______, RGB_HUI, RGB_SAI, RGB_VAI, RGB_TOG, RGB_M_T, RGB_MOD, _______, _______, _______, _______, _______, _______, + KC_CAPS, RGB_HUD, RGB_SAD, RGB_VAD, RGB_M_SW,RGB_M_G, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, _______, + _______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_K, _______, RESET , _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/dz60/keymaps/danbee/rules.mk b/keyboards/dz60/keymaps/danbee/rules.mk new file mode 100644 index 0000000000..cfd86c52ba --- /dev/null +++ b/keyboards/dz60/keymaps/danbee/rules.mk @@ -0,0 +1,2 @@ +MOUSEKEY_ENABLE = no +CONSOLE_ENABLE = yes diff --git a/keyboards/gh60/revc/keymaps/danbee/keymap.c b/keyboards/gh60/revc/keymaps/danbee/keymap.c new file mode 100644 index 0000000000..d8419f5a63 --- /dev/null +++ b/keyboards/gh60/revc/keymaps/danbee/keymap.c @@ -0,0 +1,67 @@ +#include QMK_KEYBOARD_H + +enum layer_names { + _QW, + _L1, + _L2, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + /*┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Bcksp │ + ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ Ent │ + ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │ + │ Ctrl │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ \ │ │ + ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ + │Shft│ ` │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ + ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + │ Fn │Alt │Cmd │ Space │Cmd │Hypr│Ctrl│Fn 2│ + └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘*/ + [_QW] = LAYOUT_60_iso( /* Layer 0: Qwerty */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT , + KC_LSFT, KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + MO(_L1), KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_HYPR, KC_RCTL, MO(_L2) + ), + /* 1: fn */ + /*┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + │ § │Br-│Br+│ │ │BL-│BL+│Pre│Pau│Nxt│Mut│Vo-│Vo+│ Del │ + ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ Ins │ + ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │ + │ │ │ │ │ │ │ ◀ │ ▼ │ ▲ │ ▶ │ │ │ │ │ + ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ + │ │ │ │ │ │ │BL~│ │ │ │ │ │ │ + ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + │ │ │ │ │ │ │ │ │ + └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘*/ + [_L1] = LAYOUT_60_iso( /* Layer 1: Functions */ + KC_NUBS, KC_BRID, KC_BRIU, _______, _______, BL_DEC, BL_INC, KC_MRWD, KC_MPLY, KC_MFFD, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL , + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_INS , + _______, _______, _______, _______, _______, _______, BL_TOGG, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + /* 2: fn 2 */ + /*┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + │Pwr│F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ Eject │ + ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │ + │ Caps │ │ │ │ │ │Hom│PgD│PgU│End│ │ │ │ │ + ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ + ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + │ │ │ │ │ │ │ │ │ + └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘*/ + [_L2] = LAYOUT_60_iso( /* Layer 2: Functions */ + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_EJCT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_CAPS, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/gh60/revc/keymaps/danbee/rules.mk b/keyboards/gh60/revc/keymaps/danbee/rules.mk new file mode 100644 index 0000000000..b1434f75c8 --- /dev/null +++ b/keyboards/gh60/revc/keymaps/danbee/rules.mk @@ -0,0 +1,2 @@ +MOUSEKEY_ENABLE = no +KEYBOARD_LOCK_ENABLE = yes diff --git a/keyboards/thevankeyboards/minivan/keymaps/danbee/keymap.c b/keyboards/thevankeyboards/minivan/keymaps/danbee/keymap.c new file mode 100644 index 0000000000..b675b09b4f --- /dev/null +++ b/keyboards/thevankeyboards/minivan/keymaps/danbee/keymap.c @@ -0,0 +1,62 @@ +#include QMK_KEYBOARD_H + +enum layer_names { + _QW, + _L1, + _L2, +}; + +#define CTL_TAB LCTL_T(KC_TAB) +#define L2_QUOT LT(_L2, KC_QUOT) +#define SFT_GRV LSFT_T(KC_GRV) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + /*┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬──────┐ + │Esc│ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ Bcksp│ + ├───┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬─────┤ + │Ctrl│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ Fn 2│ + ├────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤ + │Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │Shf│ + ├────┬─┴───┼───┴┬──┴───┴─┬─┴───┴─┬─┴──┬┴───┴┬──┴───┤ + │Fn │ Alt│ Cmd│ Return │ Space │Cmd │Hyper│ Ctrl│ + └────┴─────┴────┴────────┴───────┴────┴─────┴──────┘*/ + [_QW] = LAYOUT( /* Qwerty */ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + CTL_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, L2_QUOT, + SFT_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + MO(_L1), KC_LALT, KC_LGUI, KC_ENT, KC_SPC, KC_RGUI, KC_HYPR, KC_RCTL + ), + /* 1: fn */ + /*┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬──────┐ + │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ Del│ + ├───┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬─────┤ + │ │ │ │ │ │ │ ◀ │ ▼ │ ▲ │ ▶ │ │ │ + ├────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤ + │ │ │ │ │ │ │ │ │ [ │ ] │ \ │ │ + ├────┬─┴───┼───┴┬──┴───┴─┬─┴───┴─┬─┴──┬┴───┴┬──┴───┤ + │ │ │ │ │ │ │ │ │ + └────┴─────┴────┴────────┴───────┴────┴─────┴──────┘*/ + [_L1] = LAYOUT( /* LAYER 1 */ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, KC_BSLS, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + /* 2: fn 2 */ + /*┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬──────┐ + │ § │Br-│Br+│ │ │ │ │ │ │ - │ = │ Eject│ + ├───┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬─────┤ + │ │ │ │ │ │ │Hom│PgD│PgU│End│Ins│ │ + ├────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤ + │ │ │ │ │ │Prv│Nxt│Mut│Vo-│Vo+│ │ │ + ├────┬─┴───┼───┴┬──┴───┴─┬─┴───┴─┬─┴──┬┴───┴┬──┴───┤ + │ │ │ │ │ Pause │ │ │ │ + └────┴─────┴────┴────────┴───────┴────┴─────┴──────┘*/ + [_L2] = LAYOUT( /* LAYER 2 */ + KC_NUBS, KC_BRID, KC_BRIU, _______, RESET, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_EJCT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, _______, + _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, + _______, _______, _______, _______, KC_MPLY, _______, _______, _______ + ), +}; diff --git a/keyboards/thevankeyboards/minivan/keymaps/danbee/rules.mk b/keyboards/thevankeyboards/minivan/keymaps/danbee/rules.mk new file mode 100644 index 0000000000..b1434f75c8 --- /dev/null +++ b/keyboards/thevankeyboards/minivan/keymaps/danbee/rules.mk @@ -0,0 +1,2 @@ +MOUSEKEY_ENABLE = no +KEYBOARD_LOCK_ENABLE = yes -- cgit v1.2.3 From 426c03eda0deb62d916498fbdd671c7d3532b9e4 Mon Sep 17 00:00:00 2001 From: moyi4681 Date: Fri, 15 Nov 2019 03:55:46 +0800 Subject: [Keyboard] add kbdmini; dztech, kbdfans keyboards cleanup (#7223) * add kbdmini, dztech and kbdfans keyboards small fix * Caps lock indicator moved from keymap * Update dz65rgb.c * fix error * fix matthewrobo keymap error * Update keyboards/kbdfans/kbd67/mkiirgb/mkiirgb.c Co-Authored-By: fauxpark * Update keyboards/dztech/dz60rgb/dz60rgb.c Co-Authored-By: fauxpark * Update keyboards/dztech/dz60rgb_ansi/dz60rgb_ansi.c Co-Authored-By: fauxpark * Update keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.c Co-Authored-By: fauxpark * Update keyboards/dztech/dz65rgb/dz65rgb.c Co-Authored-By: fauxpark * wrap all of the g_led_config stuff and rgb matrix functions in ifdefs wrap all of the g_led_config stuff and rgb matrix functions in ifdefs --- keyboards/dz60/config.h | 8 +- keyboards/dztech/dz40rgb/config.h | 32 -- keyboards/dztech/dz40rgb/dz40rgb.c | 203 ------------ keyboards/dztech/dz40rgb/dz40rgb.h | 27 -- keyboards/dztech/dz40rgb/keymaps/default/config.h | 3 - keyboards/dztech/dz40rgb/keymaps/default/keymap.c | 71 ----- .../dztech/dz40rgb/keymaps/split_space/config.h | 5 - .../dztech/dz40rgb/keymaps/split_space/keymap.c | 96 ------ keyboards/dztech/dz40rgb/rules.mk | 14 - keyboards/dztech/dz60rgb/config.h | 9 +- keyboards/dztech/dz60rgb/dz60rgb.c | 354 +-------------------- keyboards/dztech/dz60rgb/dz60rgb.h | 56 ---- keyboards/dztech/dz60rgb/info.json | 4 - keyboards/dztech/dz60rgb/keymaps/ansi/config.h | 2 - keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c | 78 ----- keyboards/dztech/dz60rgb/keymaps/default/keymap.c | 87 +---- keyboards/dztech/dz60rgb/keymaps/hhkb/config.h | 2 - keyboards/dztech/dz60rgb/keymaps/hhkb/keymap.c | 79 ----- keyboards/dztech/dz60rgb/keymaps/hhkb_iso/config.h | 2 - keyboards/dztech/dz60rgb/keymaps/hhkb_iso/keymap.c | 79 ----- keyboards/dztech/dz60rgb/keymaps/iso/config.h | 2 - keyboards/dztech/dz60rgb/keymaps/iso/keymap.c | 78 ----- .../dztech/dz60rgb/keymaps/matthewrobo/config.h | 2 +- keyboards/dztech/dz60rgb/rules.mk | 4 +- keyboards/dztech/dz60rgb_ansi/config.h | 39 +++ keyboards/dztech/dz60rgb_ansi/dz60rgb_ansi.c | 118 +++++++ keyboards/dztech/dz60rgb_ansi/dz60rgb_ansi.h | 16 + keyboards/dztech/dz60rgb_ansi/info.json | 13 + .../dztech/dz60rgb_ansi/keymaps/default/keymap.c | 36 +++ keyboards/dztech/dz60rgb_ansi/readme.md | 15 + keyboards/dztech/dz60rgb_ansi/rules.mk | 16 + keyboards/dztech/dz60rgb_wkl/config.h | 39 +++ keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.c | 116 +++++++ keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.h | 16 + keyboards/dztech/dz60rgb_wkl/info.json | 12 + .../dztech/dz60rgb_wkl/keymaps/default/keymap.c | 37 +++ keyboards/dztech/dz60rgb_wkl/readme.md | 15 + keyboards/dztech/dz60rgb_wkl/rules.mk | 14 + keyboards/dztech/dz65rgb/config.h | 23 +- keyboards/dztech/dz65rgb/dz65rgb.c | 126 ++++---- keyboards/dztech/dz65rgb/keymaps/default/keymap.c | 2 +- .../dztech/dz65rgb/keymaps/matthewrobo/config.h | 2 +- keyboards/geekboards/tester/config.h | 3 +- keyboards/kbdfans/kbd19x/config.h | 6 +- keyboards/kbdfans/kbd4x/config.h | 5 +- keyboards/kbdfans/kbd66/config.h | 4 +- keyboards/kbdfans/kbd67/hotswap/config.h | 4 +- keyboards/kbdfans/kbd67/mkii_soldered/config.h | 3 +- keyboards/kbdfans/kbd67/mkiirgb/config.h | 22 +- .../kbdfans/kbd67/mkiirgb/keymaps/default/keymap.c | 9 - keyboards/kbdfans/kbd67/mkiirgb/mkiirgb.c | 12 + keyboards/kbdfans/kbd67/rev1/config.h | 4 +- keyboards/kbdfans/kbd67/rev2/config.h | 1 + keyboards/kbdfans/kbd6x/config.h | 5 +- keyboards/kbdfans/kbd75/config.h | 1 + keyboards/kbdfans/kbd8x/config.h | 5 +- keyboards/kbdfans/kbd8x_mk2/config.h | 4 +- keyboards/kbdfans/kbdmini/config.h | 47 +++ keyboards/kbdfans/kbdmini/kbdmini.c | 96 ++++++ keyboards/kbdfans/kbdmini/kbdmini.h | 15 + keyboards/kbdfans/kbdmini/keymaps/default/keymap.c | 9 + keyboards/kbdfans/kbdmini/readme.md | 13 + keyboards/kbdfans/kbdmini/rules.mk | 33 ++ keyboards/kbdfans/kbdpad_mk2/config.h | 3 +- keyboards/xbows/knight/config.h | 2 + keyboards/xbows/woody/config.h | 3 +- 66 files changed, 888 insertions(+), 1373 deletions(-) delete mode 100644 keyboards/dztech/dz40rgb/config.h delete mode 100644 keyboards/dztech/dz40rgb/dz40rgb.c delete mode 100644 keyboards/dztech/dz40rgb/dz40rgb.h delete mode 100644 keyboards/dztech/dz40rgb/keymaps/default/config.h delete mode 100644 keyboards/dztech/dz40rgb/keymaps/default/keymap.c delete mode 100644 keyboards/dztech/dz40rgb/keymaps/split_space/config.h delete mode 100644 keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c delete mode 100644 keyboards/dztech/dz40rgb/rules.mk delete mode 100644 keyboards/dztech/dz60rgb/keymaps/ansi/config.h delete mode 100644 keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c delete mode 100644 keyboards/dztech/dz60rgb/keymaps/hhkb/config.h delete mode 100644 keyboards/dztech/dz60rgb/keymaps/hhkb/keymap.c delete mode 100644 keyboards/dztech/dz60rgb/keymaps/hhkb_iso/config.h delete mode 100644 keyboards/dztech/dz60rgb/keymaps/hhkb_iso/keymap.c delete mode 100644 keyboards/dztech/dz60rgb/keymaps/iso/config.h delete mode 100644 keyboards/dztech/dz60rgb/keymaps/iso/keymap.c create mode 100644 keyboards/dztech/dz60rgb_ansi/config.h create mode 100644 keyboards/dztech/dz60rgb_ansi/dz60rgb_ansi.c create mode 100644 keyboards/dztech/dz60rgb_ansi/dz60rgb_ansi.h create mode 100644 keyboards/dztech/dz60rgb_ansi/info.json create mode 100644 keyboards/dztech/dz60rgb_ansi/keymaps/default/keymap.c create mode 100644 keyboards/dztech/dz60rgb_ansi/readme.md create mode 100644 keyboards/dztech/dz60rgb_ansi/rules.mk create mode 100644 keyboards/dztech/dz60rgb_wkl/config.h create mode 100644 keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.c create mode 100644 keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.h create mode 100644 keyboards/dztech/dz60rgb_wkl/info.json create mode 100644 keyboards/dztech/dz60rgb_wkl/keymaps/default/keymap.c create mode 100644 keyboards/dztech/dz60rgb_wkl/readme.md create mode 100644 keyboards/dztech/dz60rgb_wkl/rules.mk create mode 100644 keyboards/kbdfans/kbdmini/config.h create mode 100644 keyboards/kbdfans/kbdmini/kbdmini.c create mode 100644 keyboards/kbdfans/kbdmini/kbdmini.h create mode 100644 keyboards/kbdfans/kbdmini/keymaps/default/keymap.c create mode 100644 keyboards/kbdfans/kbdmini/readme.md create mode 100644 keyboards/kbdfans/kbdmini/rules.mk (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/config.h b/keyboards/dz60/config.h index d121d997b8..63794d0270 100644 --- a/keyboards/dz60/config.h +++ b/keyboards/dz60/config.h @@ -25,8 +25,9 @@ /* number of backlight levels */ #define BACKLIGHT_PIN B6 +#ifdef BACKLIGHT_PIN #define BACKLIGHT_LEVELS 5 - +#endif /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 @@ -35,12 +36,13 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - #define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 16 #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 - +#define RGBLIGHT_SLEEP +#endif #endif \ No newline at end of file diff --git a/keyboards/dztech/dz40rgb/config.h b/keyboards/dztech/dz40rgb/config.h deleted file mode 100644 index 5f1502f4af..0000000000 --- a/keyboards/dztech/dz40rgb/config.h +++ /dev/null @@ -1,32 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1220 -#define DEVICE_VER 0x0001 -#define MANUFACTURER DZTECH -#define PRODUCT DZ40RGB -#define DESCRIPTION DZ40 ARM RGB keyboard -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -#define MATRIX_ROW_PINS { B13, B12, A2, A1 } -#define MATRIX_COL_PINS {A6, A7, B0, B1, C15, C14, C13, B9, B8, A8, B14, B15 } - -/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/ - -#define DIODE_DIRECTION COL2ROW - -#define DEBOUNCE 3 -#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended -#define RGB_MATRIX_KEYPRESSES -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define DRIVER_ADDR_1 0b1010000 -#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. - -#define DRIVER_COUNT 2 diff --git a/keyboards/dztech/dz40rgb/dz40rgb.c b/keyboards/dztech/dz40rgb/dz40rgb.c deleted file mode 100644 index 92e4a7cad3..0000000000 --- a/keyboards/dztech/dz40rgb/dz40rgb.c +++ /dev/null @@ -1,203 +0,0 @@ -#include "dz40rgb.h" -#include "config.h" -#if defined (split_space) -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ - {0, K_12, J_12, L_12}, - {0, K_11, J_11, L_11}, - {0, K_10, J_10, L_10}, - {0, K_9, J_9, L_9}, - {0, K_8, J_8, L_8}, - {0, K_7, J_7, L_7}, - {0, K_6, J_6, L_6}, - {0, K_5, J_5, L_5}, - {0, K_4, J_4, L_4}, - {0, K_3, J_3, L_3}, - {0, K_2, J_2, L_2}, - {0, K_1, J_1, L_1}, - - {0, K_13, J_13, L_13}, - {0, K_14, J_14, L_14}, - - {0, H_12, G_12, I_12}, - {0, H_11, G_11, I_11}, - {0, H_10, G_10, I_10}, - {0, H_9, G_9, I_9}, - {0, H_8, G_8, I_8}, - {0, H_7, G_7, I_7}, - {0, H_6, G_6, I_6}, - {0, H_5, G_5, I_5}, - {0, H_4, G_4, I_4}, - {0, H_3, G_3, I_3}, - {0, H_2, G_2, I_2}, - {0, H_1, G_1, I_1}, - - {0, H_13, G_13, I_13}, - {0, H_14, G_14, I_14}, - - {0, E_12, D_12, F_12}, - {0, E_11, D_11, F_11}, - {0, E_10, D_10, F_10}, - {0, E_9, D_9, F_9}, - {0, E_8, D_8, F_8}, - {0, E_7, D_7, F_7}, - {0, E_6, D_6, F_6}, - {0, E_5, D_5, F_5}, - {0, E_4, D_4, F_4}, - {0, E_3, D_3, F_3}, - {0, E_2, D_2, F_2}, - {0, E_1, D_1, F_1}, - - {0, E_13, D_13, F_13}, - {0, E_14, D_14, F_14}, - - {0, B_12, A_12, C_12}, - {0, B_11, A_11, C_11}, - {0, B_10, A_10, C_10}, - {0, B_9, A_9, C_9}, - {0, B_8, A_8, C_8}, - {0, B_7, A_7, C_7}, - {0, B_6, A_6, C_6}, - {0, B_5, A_5, C_5}, - {0, B_4, A_4, C_4}, - {0, B_3, A_3, C_3}, - {0, B_2, A_2, C_2}, - {0, B_1, A_1, C_1} - -}; - -led_config_t g_led_config = { { - { 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 }, - { 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 }, - { 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, 28 }, - { 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42 } -}, { - { 223, 0 }, { 203, 0 }, { 183, 0 }, { 162, 0 }, { 142, 0 }, { 122, 0 }, { 101, 0 }, { 81, 0 }, { 61, 0 }, { 40, 0 }, { 20, 0 }, { 0, 0 }, - { 223, 10 }, { 0, 10 }, { 223, 21 }, { 203, 21 }, { 183, 21 }, { 162, 21 }, { 142, 21 }, { 122, 21 }, { 101, 21 }, { 81, 21 }, { 61, 21 }, { 40, 21 }, - { 20, 21 }, { 0, 21 }, { 223, 31 }, { 0, 31 }, { 223, 42 }, { 203, 42 }, { 183, 42 }, { 162, 42 }, { 142, 42 }, { 122, 42 }, { 101, 42 }, { 81, 42 }, - { 61, 42 }, { 40, 42 }, { 20, 42 }, { 0, 42 }, { 223, 53 }, { 0, 53 }, { 223, 63 }, { 203, 63 }, { 183, 63 }, { 162, 63 }, { 142, 63 }, { 122, 63 }, - { 101, 63 }, { 81, 63 }, { 61, 63 }, { 40, 63 }, { 20, 63 }, { 0, 63 } -}, { - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, - 4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 4, 4, - 4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1 -} }; - -#else -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ - {0, K_12, J_12, L_12}, - {0, K_11, J_11, L_11}, - {0, K_10, J_10, L_10}, - {0, K_9, J_9, L_9}, - {0, K_8, J_8, L_8}, - {0, K_7, J_7, L_7}, - {0, K_6, J_6, L_6}, - {0, K_5, J_5, L_5}, - {0, K_4, J_4, L_4}, - {0, K_3, J_3, L_3}, - {0, K_2, J_2, L_2}, - {0, K_1, J_1, L_1}, - - {0, K_13, J_13, L_13}, - {0, K_14, J_14, L_14}, - - {0, H_12, G_12, I_12}, - {0, H_11, G_11, I_11}, - {0, H_10, G_10, I_10}, - {0, H_9, G_9, I_9}, - {0, H_8, G_8, I_8}, - {0, H_7, G_7, I_7}, - {0, H_6, G_6, I_6}, - {0, H_5, G_5, I_5}, - {0, H_4, G_4, I_4}, - {0, H_3, G_3, I_3}, - {0, H_2, G_2, I_2}, - {0, H_1, G_1, I_1}, - - {0, H_13, G_13, I_13}, - {0, H_14, G_14, I_14}, - - {0, E_12, D_12, F_12}, - {0, E_11, D_11, F_11}, - {0, E_10, D_10, F_10}, - {0, E_9, D_9, F_9}, - {0, E_8, D_8, F_8}, - {0, E_7, D_7, F_7}, - {0, E_6, D_6, F_6}, - {0, E_5, D_5, F_5}, - {0, E_4, D_4, F_4}, - {0, E_3, D_3, F_3}, - {0, E_2, D_2, F_2}, - {0, E_1, D_1, F_1}, - - {0, E_13, D_13, F_13}, - {0, E_14, D_14, F_14}, - - {0, B_12, A_12, C_12}, - {0, B_11, A_11, C_11}, - {0, B_10, A_10, C_10}, - {0, B_9, A_9, C_9}, - {0, B_8, A_8, C_8}, - {0, B_13, A_13, C_13}, - {0, B_5, A_5, C_5}, - {0, B_4, A_4, C_4}, - {0, B_3, A_3, C_3}, - {0, B_2, A_2, C_2}, - {0, B_1, A_1, C_1} - -}; - -led_config_t g_led_config = { { - { 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 }, - { 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 }, - { 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, 28 }, - { 52, 51, 50, 49, 48, NO_LED, 47, 46, 45, 44, 43, 42 } -}, { - { 223, 0 }, { 203, 0 }, { 183, 0 }, { 162, 0 }, { 142, 0 }, { 122, 0 }, { 101, 0 }, { 81, 0 }, { 61, 0 }, { 40, 0 }, { 20, 0 }, { 0, 0 }, - { 223, 10 }, { 0, 10 }, { 223, 21 }, { 203, 21 }, { 183, 21 }, { 162, 21 }, { 142, 21 }, { 122, 21 }, { 101, 21 }, { 81, 21 }, { 61, 21 }, { 40, 21 }, - { 20, 21 }, { 0, 21 }, { 223, 31 }, { 0, 31 }, { 223, 42 }, { 203, 42 }, { 183, 42 }, { 162, 42 }, { 142, 42 }, { 122, 42 }, { 101, 42 }, { 81, 42 }, - { 61, 42 }, { 40, 42 }, { 20, 42 }, { 0, 42 }, { 223, 53 }, { 0, 53 }, { 223, 63 }, { 203, 63 }, { 183, 63 }, { 162, 63 }, { 142, 63 }, { 111, 63 }, - { 81, 63 }, { 61, 63 }, { 40, 63 }, { 20, 63 }, { 0, 63 } -}, { - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, - 4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 4, 4, - 4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1 -} }; - -#endif - -void matrix_init_kb(void) { - matrix_init_user(); -} -void matrix_scan_kb(void) { - matrix_scan_user(); -} -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - return process_record_user(keycode, record); -} -void suspend_power_down_kb(void) -{ - rgb_matrix_set_suspend_state(true); - suspend_power_down_user(); -} - -void suspend_wakeup_init_kb(void) -{ - rgb_matrix_set_suspend_state(false); - suspend_wakeup_init_user(); -} diff --git a/keyboards/dztech/dz40rgb/dz40rgb.h b/keyboards/dztech/dz40rgb/dz40rgb.h deleted file mode 100644 index 5f88a6225a..0000000000 --- a/keyboards/dztech/dz40rgb/dz40rgb.h +++ /dev/null @@ -1,27 +0,0 @@ -#pragma once -#include "quantum.h" -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a, k3b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k36, k36, k37, k38, k39, k3a, k3b } \ -} - -#define LAYOUT_SPLIT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ -} diff --git a/keyboards/dztech/dz40rgb/keymaps/default/config.h b/keyboards/dztech/dz40rgb/keymaps/default/config.h deleted file mode 100644 index 30bf11ed5d..0000000000 --- a/keyboards/dztech/dz40rgb/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once -#define DRIVER_1_LED_TOTAL 53 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz40rgb/keymaps/default/keymap.c b/keyboards/dztech/dz40rgb/keymaps/default/keymap.c deleted file mode 100644 index e4f56f5a8e..0000000000 --- a/keyboards/dztech/dz40rgb/keymaps/default/keymap.c +++ /dev/null @@ -1,71 +0,0 @@ -#include QMK_KEYBOARD_H -#define _LAYER0 0 -#define _LAYER1 1 -#define _LAYER2 2 -#define _LAYER3 3 -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_LAYER0] = LAYOUT( /* Base */ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , - RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT - ), - [_LAYER1] = LAYOUT( /* FN */ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, - _______, _______, _______, _______, _______, _______, TO(3), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY - ), - [_LAYER2] = LAYOUT( /* FN2 */ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, - RGB_TOG, RGB_MOD, BL_INC, BL_DEC, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY - ), - [_LAYER3] = LAYOUT( /* FN3 */ - TO(0), RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - -}; - -void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { - for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) { - rgb_matrix_set_color( i, red, green, blue ); - } - } -} - -void rgb_matrix_indicators_user(void) { - if (!g_suspend_state) { - switch (biton32(layer_state)) { - case _LAYER1: - rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break; - case _LAYER2: - rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break; - case _LAYER3: - rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break; - } - } - -} - - - - - -void matrix_init_user(void) { - //user initialization -} - -void matrix_scan_user(void) { - //user matrix -} - - bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; - } - diff --git a/keyboards/dztech/dz40rgb/keymaps/split_space/config.h b/keyboards/dztech/dz40rgb/keymaps/split_space/config.h deleted file mode 100644 index 4f35bef373..0000000000 --- a/keyboards/dztech/dz40rgb/keymaps/split_space/config.h +++ /dev/null @@ -1,5 +0,0 @@ -#pragma once -#include "../../config.h" -#define split_space -#define DRIVER_1_LED_TOTAL 54 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c b/keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c deleted file mode 100644 index 04c31bab1b..0000000000 --- a/keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c +++ /dev/null @@ -1,96 +0,0 @@ -#include QMK_KEYBOARD_H -#define _LAYER0 0 -#define _LAYER1 1 -#define _LAYER2 2 -#define _LAYER3 3 -#define _LAYER4 4 -#define _LAYER5 5 -#define _LAYER6 6 -#define _LAYER7 7 -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_LAYER0] = LAYOUT_SPLIT( /* Base */ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , - RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), - [_LAYER1] = LAYOUT_SPLIT( /* FN */ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, - _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY), - [_LAYER2] = LAYOUT_SPLIT( /* LIGHT */ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, - _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY), - [_LAYER3] = LAYOUT_SPLIT( /* NUMPAD */ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , - RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), - [_LAYER4] = LAYOUT_SPLIT( /* MAC */ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , - RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), - [_LAYER5] = LAYOUT_SPLIT( /* NEED TO DEFINE */ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , - RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), - [_LAYER6] = LAYOUT_SPLIT( /* NEED TO DEFINE */ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , - RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), - [_LAYER7] = LAYOUT_SPLIT( /* NEED TO DEFINE */ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , - RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), - }; - - - -void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { - for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) { - rgb_matrix_set_color( i, red, green, blue ); - } - } -} - -void rgb_matrix_indicators_user(void) { - if (!g_suspend_state) { - switch (biton32(layer_state)) { - case _LAYER1: - rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break; - case _LAYER2: - rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break; - case _LAYER4: - rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break; - case _LAYER5: - rgb_matrix_layer_helper(0x00, 0xFF, 0xFF, false); break; - case _LAYER6: - rgb_matrix_layer_helper(0xFF, 0xFF, 0xFF, false); break; - } - } - -} - - - - - -void matrix_init_user(void) { - //user initialization -} - -void matrix_scan_user(void) { - //user matrix -} - - bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; - } - diff --git a/keyboards/dztech/dz40rgb/rules.mk b/keyboards/dztech/dz40rgb/rules.mk deleted file mode 100644 index fc4b028d5c..0000000000 --- a/keyboards/dztech/dz40rgb/rules.mk +++ /dev/null @@ -1,14 +0,0 @@ -MCU = STM32F303 -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p DF11 -v 0483 -BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = no # USB Nkey Rollover -AUDIO_ENABLE = no -RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix -NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in66666666666666666666666666 diff --git a/keyboards/dztech/dz60rgb/config.h b/keyboards/dztech/dz60rgb/config.h index edf0982ab2..c9f6937eea 100644 --- a/keyboards/dztech/dz60rgb/config.h +++ b/keyboards/dztech/dz60rgb/config.h @@ -21,6 +21,7 @@ #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 3 +#ifdef RGB_MATRIX_ENABLE #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES @@ -29,14 +30,10 @@ #define DISABLE_RGB_MATRIX_SPLASH #define DISABLE_RGB_MATRIX_MULTISPLASH #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b1010000 #define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. #define DRIVER_COUNT 2 -#if defined (dzrgb60_ansi) || defined (dzrgb60_iso) -#define DRIVER_1_LED_TOTAL 61 -#elif defined (dzrgb60_hhkb) || defined (dzrgb60_hhkb_iso) -#define DRIVER_1_LED_TOTAL 62 -#else #define DRIVER_1_LED_TOTAL 63 -#endif #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#endif \ No newline at end of file diff --git a/keyboards/dztech/dz60rgb/dz60rgb.c b/keyboards/dztech/dz60rgb/dz60rgb.c index 0909ace232..a8217480d0 100644 --- a/keyboards/dztech/dz60rgb/dz60rgb.c +++ b/keyboards/dztech/dz60rgb/dz60rgb.c @@ -1,348 +1,5 @@ #include "dz60rgb.h" -#include "config.h" -#if defined (dzrgb60_iso) -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { - {0, K_14, J_14, L_14}, - {0, K_13, J_13, L_13}, - {0, K_12, J_12, L_12}, - {0, K_11, J_11, L_11}, - {0, K_10, J_10, L_10}, - {0, K_9, J_9, L_9}, - {0, K_8, J_8, L_8}, - {0, K_7, J_7, L_7}, - {0, K_6, J_6, L_6}, - {0, K_5, J_5, L_5}, - {0, K_4, J_4, L_4}, - {0, K_3, J_3, L_3}, - {0, K_2, J_2, L_2}, - {0, K_1, J_1, L_1}, - {0, H_15, G_15, I_15}, - {0, H_13, G_13, I_13}, - {0, H_12, G_12, I_12}, - {0, H_11, G_11, I_11}, - {0, H_10, G_10, I_10}, - {0, H_9, G_9, I_9}, - {0, H_8, G_8, I_8}, - {0, H_7, G_7, I_7}, - {0, H_6, G_6, I_6}, - {0, H_5, G_5, I_5}, - {0, H_4, G_4, I_4}, - {0, H_3, G_3, I_3}, - {0, H_2, G_2, I_2}, - {0, H_1, G_1, I_1}, - {0, B_14, A_14, C_14}, - {0, E_12, D_12, F_12}, - {0, E_11, D_11, F_11}, - {0, E_10, D_10, F_10}, - {0, E_9, D_9, F_9}, - {0, E_8, D_8, F_8}, - {0, E_7, D_7, F_7}, - {0, E_6, D_6, F_6}, - {0, E_5, D_5, F_5}, - {0, E_4, D_4, F_4}, - {0, E_3, D_3, F_3}, - {0, E_2, D_2, F_2}, - {0, E_1, D_1, F_1}, - {0, B_13, A_13, C_13}, - {0, B_11, A_11, C_11}, - {0, B_10, A_10, C_10}, - {0, B_9, A_9, C_9}, - {0, B_8, A_8, C_8}, - {0, B_7, A_7, C_7}, - {0, B_6, A_6, C_6}, - {0, B_5, A_5, C_5}, - {0, B_4, A_4, C_4}, - {0, B_3, A_3, C_3}, - {0, B_2, A_2, C_2}, - {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, - {0, E_13, D_13, F_13}, - {0, B_12, A_12, C_12}, - {0, E_15, D_15, F_15}, - {0, B_16, A_16, C_16}, - {0, E_16, D_16, F_16}, - {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16}, -}; - -led_config_t g_led_config = { { - { 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 }, - { 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 28 }, - { 40, 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, NO_LED, 14 }, - { 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, NO_LED, NO_LED }, - { 60, 59, 58, NO_LED, NO_LED, 57, NO_LED, NO_LED, NO_LED, 56, 55, 54, NO_LED, 53 } -}, { - { 216, 0 }, { 192, 0 }, { 176, 0 }, { 160, 0 }, { 144, 0 }, { 128, 0 }, { 112, 0 }, { 96, 0 }, { 80, 0 }, { 64, 0 }, { 48, 0 }, { 32, 0 }, { 16, 0 }, { 0, 0 }, - { 220, 24 }, { 200, 16 }, { 184, 16 }, { 168, 16 }, { 152, 16 }, { 136, 16 }, { 120, 16 }, { 104, 16 }, { 88, 16 }, { 72, 16 }, { 56, 16 }, { 40, 16 }, { 24, 16 }, { 4, 16 }, - { 204, 32 }, { 188, 32 }, { 172, 32 }, { 156, 32 }, { 140, 32 }, { 124, 32 }, { 108, 32 }, { 92, 32 }, { 76, 32 }, { 60, 32 }, { 44, 32 }, { 28, 32 }, { 6, 32 }, { 210, 48 }, - { 180, 48 }, { 164, 48 }, { 148, 48 }, { 132, 48 }, { 116, 48 }, { 100, 48 }, { 84, 48 }, { 68, 48 }, { 52, 48 }, { 20, 48 }, { 10, 48 }, { 222, 64 }, { 202, 64 }, { 182, 64 }, - { 162, 64 }, { 102, 64 }, { 42, 64 }, { 22, 64 }, { 2, 64 } -}, { - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, - 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, - 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, - 1, 4, 1, 1, 1 -} }; - -#elif defined (dzrgb60_hhkb) -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { - {0, H_15, G_15, I_15}, - {0, K_14, J_14, L_14}, - {0, K_13, J_13, L_13}, - {0, K_12, J_12, L_12}, - {0, K_11, J_11, L_11}, - {0, K_10, J_10, L_10}, - {0, K_9, J_9, L_9}, - {0, K_8, J_8, L_8}, - {0, K_7, J_7, L_7}, - {0, K_6, J_6, L_6}, - {0, K_5, J_5, L_5}, - {0, K_4, J_4, L_4}, - {0, K_3, J_3, L_3}, - {0, K_2, J_2, L_2}, - {0, K_1, J_1, L_1}, - {0, H_14, G_14, I_14}, - {0, H_13, G_13, I_13}, - {0, H_12, G_12, I_12}, - {0, H_11, G_11, I_11}, - {0, H_10, G_10, I_10}, - {0, H_9, G_9, I_9}, - {0, H_8, G_8, I_8}, - {0, H_7, G_7, I_7}, - {0, H_6, G_6, I_6}, - {0, H_5, G_5, I_5}, - {0, H_4, G_4, I_4}, - {0, H_3, G_3, I_3}, - {0, H_2, G_2, I_2}, - {0, H_1, G_1, I_1}, - {0, E_14, D_14, F_14}, - {0, E_12, D_12, F_12}, - {0, E_11, D_11, F_11}, - {0, E_10, D_10, F_10}, - {0, E_9, D_9, F_9}, - {0, E_8, D_8, F_8}, - {0, E_7, D_7, F_7}, - {0, E_6, D_6, F_6}, - {0, E_5, D_5, F_5}, - {0, E_4, D_4, F_4}, - {0, E_3, D_3, F_3}, - {0, E_2, D_2, F_2}, - {0, E_1, D_1, F_1}, - {0, B_14, A_14, C_14}, - {0, B_13, A_13, C_13}, - {0, B_11, A_11, C_11}, - {0, B_10, A_10, C_10}, - {0, B_9, A_9, C_9}, - {0, B_8, A_8, C_8}, - {0, B_7, A_7, C_7}, - {0, B_6, A_6, C_6}, - {0, B_5, A_5, C_5}, - {0, B_4, A_4, C_4}, - {0, B_3, A_3, C_3}, - {0, B_2, A_2, C_2}, - {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, - {0, E_13, D_13, F_13}, - {0, B_12, A_12, C_12}, - {0, B_16, A_16, C_16}, - {0, E_16, D_16, F_16}, - {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16}, -}; - -led_config_t g_led_config = { { - { 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1 }, - { 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15 }, - { 41, 40, 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 0, 29 }, - { 54, 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, NO_LED, 42 }, - { 61, 60, 59, NO_LED, NO_LED, 58, NO_LED, NO_LED, NO_LED, NO_LED, 57, 56, NO_LED, 55 } -}, { - { 224, 0 }, { 208, 0 }, { 192, 0 }, { 176, 0 }, { 160, 0 }, { 144, 0 }, { 128, 0 }, { 112, 0 }, { 96, 0 }, { 80, 0 }, { 64, 0 }, { 48, 0 }, { 32, 0 }, { 16, 0 }, - { 0, 0 }, { 220, 16 }, { 200, 16 }, { 184, 16 }, { 168, 16 }, { 152, 16 }, { 136, 16 }, { 120, 16 }, { 104, 16 }, { 88, 16 }, { 72, 16 }, { 56, 16 }, { 40, 16 }, { 24, 16 }, - { 4, 16 }, { 204, 32 }, { 188, 32 }, { 172, 32 }, { 156, 32 }, { 140, 32 }, { 124, 32 }, { 108, 32 }, { 92, 32 }, { 76, 32 }, { 60, 32 }, { 44, 32 }, { 28, 32 }, { 6, 32 }, - { 224, 48 }, { 202, 48 }, { 180, 48 }, { 164, 48 }, { 148, 48 }, { 132, 48 }, { 116, 48 }, { 100, 48 }, { 84, 48 }, { 68, 48 }, { 52, 48 }, { 20, 48 }, { 10, 48 }, { 218, 64 }, - { 198, 64 }, { 178, 64 }, { 112, 64 }, { 46, 64 }, { 26, 64 }, { 6, 64 } -}, { - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, - 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, - 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, - 1, 1, 4, 1, 1, 1 -} }; - -#elif defined (dzrgb60_hhkb_iso) -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { - {0, H_15, G_15, I_15}, - {0, K_14, J_14, L_14}, - {0, K_13, J_13, L_13}, - {0, K_12, J_12, L_12}, - {0, K_11, J_11, L_11}, - {0, K_10, J_10, L_10}, - {0, K_9, J_9, L_9}, - {0, K_8, J_8, L_8}, - {0, K_7, J_7, L_7}, - {0, K_6, J_6, L_6}, - {0, K_5, J_5, L_5}, - {0, K_4, J_4, L_4}, - {0, K_3, J_3, L_3}, - {0, K_2, J_2, L_2}, - {0, K_1, J_1, L_1}, - {0, K_15, J_15, L_15}, - {0, H_13, G_13, I_13}, - {0, H_12, G_12, I_12}, - {0, H_11, G_11, I_11}, - {0, H_10, G_10, I_10}, - {0, H_9, G_9, I_9}, - {0, H_8, G_8, I_8}, - {0, H_7, G_7, I_7}, - {0, H_6, G_6, I_6}, - {0, H_5, G_5, I_5}, - {0, H_4, G_4, I_4}, - {0, H_3, G_3, I_3}, - {0, H_2, G_2, I_2}, - {0, H_1, G_1, I_1}, - {0, E_15, D_15, F_15}, - {0, E_12, D_12, F_12}, - {0, E_11, D_11, F_11}, - {0, E_10, D_10, F_10}, - {0, E_9, D_9, F_9}, - {0, E_8, D_8, F_8}, - {0, E_7, D_7, F_7}, - {0, E_6, D_6, F_6}, - {0, E_5, D_5, F_5}, - {0, E_4, D_4, F_4}, - {0, E_3, D_3, F_3}, - {0, E_2, D_2, F_2}, - {0, E_1, D_1, F_1}, - {0, B_14, A_14, C_14}, - {0, B_13, A_13, C_13}, - {0, B_11, A_11, C_11}, - {0, B_10, A_10, C_10}, - {0, B_9, A_9, C_9}, - {0, B_8, A_8, C_8}, - {0, B_7, A_7, C_7}, - {0, B_6, A_6, C_6}, - {0, B_5, A_5, C_5}, - {0, B_4, A_4, C_4}, - {0, B_3, A_3, C_3}, - {0, B_2, A_2, C_2}, - {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, - {0, E_13, D_13, F_13}, - {0, B_12, A_12, C_12}, - {0, B_16, A_16, C_16}, - {0, E_16, D_16, F_16}, - {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16}, -}; - -led_config_t g_led_config = { { - { 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1 }, - { 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 29 }, - { 41, 40, 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 0, 15 }, - { 54, 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, NO_LED, 42 }, - { 61, 60, 59, NO_LED, NO_LED, 58, NO_LED, NO_LED, NO_LED, NO_LED, 57, 56, NO_LED, 55 } -}, { - { 224, 0 }, { 208, 0 }, { 192, 0 }, { 176, 0 }, { 160, 0 }, { 144, 0 }, { 128, 0 }, { 112, 0 }, { 96, 0 }, { 80, 0 }, { 64, 0 }, { 48, 0 }, { 32, 0 }, { 16, 0 }, - { 0, 0 }, { 220, 24 }, { 200, 16 }, { 184, 16 }, { 168, 16 }, { 152, 16 }, { 136, 16 }, { 120, 16 }, { 104, 16 }, { 88, 16 }, { 72, 16 }, { 56, 16 }, { 40, 16 }, { 24, 16 }, - { 4, 16 }, { 204, 32 }, { 188, 32 }, { 172, 32 }, { 156, 32 }, { 140, 32 }, { 124, 32 }, { 108, 32 }, { 92, 32 }, { 76, 32 }, { 60, 32 }, { 44, 32 }, { 28, 32 }, { 6, 32 }, - { 224, 48 }, { 202, 48 }, { 180, 48 }, { 164, 48 }, { 148, 48 }, { 132, 48 }, { 116, 48 }, { 100, 48 }, { 84, 48 }, { 68, 48 }, { 52, 48 }, { 20, 48 }, { 10, 48 }, { 218, 64 }, - { 198, 64 }, { 178, 64 }, { 112, 64 }, { 46, 64 }, { 26, 64 }, { 6, 64 } -}, { - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, - 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, - 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, - 1, 1, 4, 1, 1, 1 -} }; - -#elif defined (dzrgb60_ansi) -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { - {0, K_14, J_14, L_14}, - {0, K_13, J_13, L_13}, - {0, K_12, J_12, L_12}, - {0, K_11, J_11, L_11}, - {0, K_10, J_10, L_10}, - {0, K_9, J_9, L_9}, - {0, K_8, J_8, L_8}, - {0, K_7, J_7, L_7}, - {0, K_6, J_6, L_6}, - {0, K_5, J_5, L_5}, - {0, K_4, J_4, L_4}, - {0, K_3, J_3, L_3}, - {0, K_2, J_2, L_2}, - {0, K_1, J_1, L_1}, - {0, H_14, G_14, I_14}, - {0, H_13, G_13, I_13}, - {0, H_12, G_12, I_12}, - {0, H_11, G_11, I_11}, - {0, H_10, G_10, I_10}, - {0, H_9, G_9, I_9}, - {0, H_8, G_8, I_8}, - {0, H_7, G_7, I_7}, - {0, H_6, G_6, I_6}, - {0, H_5, G_5, I_5}, - {0, H_4, G_4, I_4}, - {0, H_3, G_3, I_3}, - {0, H_2, G_2, I_2}, - {0, H_1, G_1, I_1}, - {0, E_14, D_14, F_14}, - {0, E_12, D_12, F_12}, - {0, E_11, D_11, F_11}, - {0, E_10, D_10, F_10}, - {0, E_9, D_9, F_9}, - {0, E_8, D_8, F_8}, - {0, E_7, D_7, F_7}, - {0, E_6, D_6, F_6}, - {0, E_5, D_5, F_5}, - {0, E_4, D_4, F_4}, - {0, E_3, D_3, F_3}, - {0, E_2, D_2, F_2}, - {0, E_1, D_1, F_1}, - {0, B_13, A_13, C_13}, - {0, B_11, A_11, C_11}, - {0, B_10, A_10, C_10}, - {0, B_9, A_9, C_9}, - {0, B_8, A_8, C_8}, - {0, B_7, A_7, C_7}, - {0, B_6, A_6, C_6}, - {0, B_5, A_5, C_5}, - {0, B_4, A_4, C_4}, - {0, B_3, A_3, C_3}, - {0, B_2, A_2, C_2}, - {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, - {0, E_13, D_13, F_13}, - {0, B_12, A_12, C_12}, - {0, E_15, D_15, F_15}, - {0, B_16, A_16, C_16}, - {0, E_16, D_16, F_16}, - {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16}, -}; - -led_config_t g_led_config = { { - { 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 }, - { 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 }, - { 40, 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, NO_LED, 28 }, - { 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, NO_LED, NO_LED }, - { 60, 59, 58, NO_LED, NO_LED, 57, NO_LED, NO_LED, NO_LED, 56, 55, 54, NO_LED, 53 } -}, { - { 216, 0 }, { 192, 0 }, { 176, 0 }, { 160, 0 }, { 144, 0 }, { 128, 0 }, { 112, 0 }, { 96, 0 }, { 80, 0 }, { 64, 0 }, { 48, 0 }, { 32, 0 }, { 16, 0 }, { 0, 0 }, - { 220, 16 }, { 200, 16 }, { 184, 16 }, { 168, 16 }, { 152, 16 }, { 136, 16 }, { 120, 16 }, { 104, 16 }, { 88, 16 }, { 72, 16 }, { 56, 16 }, { 40, 16 }, { 24, 16 }, { 4, 16 }, - { 214, 24 }, { 188, 32 }, { 172, 32 }, { 156, 32 }, { 140, 32 }, { 124, 32 }, { 108, 32 }, { 92, 32 }, { 76, 32 }, { 60, 32 }, { 44, 32 }, { 28, 32 }, { 6, 32 }, { 210, 48 }, - { 180, 48 }, { 164, 48 }, { 148, 48 }, { 132, 48 }, { 116, 48 }, { 100, 48 }, { 84, 48 }, { 68, 48 }, { 52, 48 }, { 20, 48 }, { 10, 48 }, { 222, 64 }, { 202, 64 }, { 182, 64 }, - { 162, 64 }, { 102, 64 }, { 42, 64 }, { 22, 64 }, { 2, 64 } -}, { - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, - 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, - 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, - 1, 4, 1, 1, 1 -} }; - -#else +#ifdef RGB_MATRIX_ENABLE const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, K_14, J_14, L_14}, {0, K_13, J_13, L_13}, @@ -452,3 +109,12 @@ void suspend_wakeup_init_kb(void) rgb_matrix_set_suspend_state(false); suspend_wakeup_init_user(); } +__attribute__ ((weak)) +void rgb_matrix_indicators_user(void) +{ + if (IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) + { + rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); + } +} + diff --git a/keyboards/dztech/dz60rgb/dz60rgb.h b/keyboards/dztech/dz60rgb/dz60rgb.h index 7cb8a43e40..a029933f1f 100644 --- a/keyboards/dztech/dz60rgb/dz60rgb.h +++ b/keyboards/dztech/dz60rgb/dz60rgb.h @@ -1,7 +1,6 @@ #pragma once #define XXX KC_NO #include "quantum.h" - #define LAYOUT( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ @@ -15,58 +14,3 @@ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \ { K40, K41, K42, XXX, XXX, K45, XXX, XXX, K48, K49, K4A, K4B, XXX, K4D } \ } -#define LAYOUT_ISO( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \ - K40, K41, K42, K45, K49, K4A, K4B, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, XXX }, \ - { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, XXX, K4D } \ -} - -#define LAYOUT_HHKB( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,\ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,\ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,\ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D,\ - K40, K41, K42, K45, K4A, K4B, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D}, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \ - { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, XXX, K4A, K4B, XXX, K4D } \ -} - -#define LAYOUT_HHKB_ISO( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ - K40, K41, K42, K45, K4A, K4B, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,}, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \ - { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, XXX, K4A, K4B, XXX, K4D } \ -} - -#define LAYOUT_60_ansi( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \ - K40, K41, K42, K45, K49, K4A, K4B, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, XXX }, \ - { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, XXX, K4D } \ -} diff --git a/keyboards/dztech/dz60rgb/info.json b/keyboards/dztech/dz60rgb/info.json index 2fbe5a7489..e924a0f712 100644 --- a/keyboards/dztech/dz60rgb/info.json +++ b/keyboards/dztech/dz60rgb/info.json @@ -9,9 +9,5 @@ "key_count": 63, "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"\u2191", "x":13, "y":3},{"label":"?", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Ctrl", "x":11, "y":4}, {"label":"\u2190", "x":12, "y":4}, {"label":"\u2193", "x":13, "y":4}, {"label":"\u2192", "x":14, "y":4}] }, - "LAYOUT_60_ansi": { - "key_count": 61, - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - } } } diff --git a/keyboards/dztech/dz60rgb/keymaps/ansi/config.h b/keyboards/dztech/dz60rgb/keymaps/ansi/config.h deleted file mode 100644 index 4bfad0df0d..0000000000 --- a/keyboards/dztech/dz60rgb/keymaps/ansi/config.h +++ /dev/null @@ -1,2 +0,0 @@ -#pragma once -#define dzrgb60_ansi diff --git a/keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c b/keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c deleted file mode 100644 index 97133d4296..0000000000 --- a/keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c +++ /dev/null @@ -1,78 +0,0 @@ -#include QMK_KEYBOARD_H -#define _LAYER0 0 -#define _LAYER1 1 -#define _LAYER2 2 -#define _LAYER3 3 -#define _LAYER4 4 -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_LAYER0] = LAYOUT_60_ansi( /* Base */ - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ - CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), MO(2), KC_RCTL), - [_LAYER1] = LAYOUT_60_ansi( /* FN */ - KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ - KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,\ - KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, \ - KC_TRNS, KC_TRNS, KC_TRNS, TO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - [_LAYER2] = LAYOUT_60_ansi( /* FN2 */ - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ - KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, RESET ,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - [_LAYER3] = LAYOUT_60_ansi( /* FN3 */ - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ - CTL_T(KC_CAPS),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_TRNS,MO(4), KC_RALT, KC_RCTL), - [_LAYER4] = LAYOUT_60_ansi( /* FN4 */ - KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ - KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ - KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_HOME, KC_PGUP, KC_TRNS,\ - KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, \ - KC_TRNS, KC_TRNS, KC_TRNS, TO(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - }; - -void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { - for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) { - rgb_matrix_set_color( i, red, green, blue ); - } - } -} - -void rgb_matrix_indicators_user(void) { - uint8_t this_led = host_keyboard_leds(); - if (!g_suspend_state) { - switch (biton32(layer_state)) { - case _LAYER1: - rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break; - case _LAYER2: - rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break; - case _LAYER3: - rgb_matrix_layer_helper(0x00, 0x00, 0xFF, false); break; - case _LAYER4: - rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break; - } - } - if ( this_led & (1<", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] + } + } +} diff --git a/keyboards/dztech/dz60rgb_ansi/keymaps/default/keymap.c b/keyboards/dztech/dz60rgb_ansi/keymaps/default/keymap.c new file mode 100644 index 0000000000..ac033f308c --- /dev/null +++ b/keyboards/dztech/dz60rgb_ansi/keymaps/default/keymap.c @@ -0,0 +1,36 @@ +#include QMK_KEYBOARD_H +#define _LAYER0 0 +#define _LAYER1 1 +#define _LAYER2 2 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT_60_ansi( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ + CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), MO(2), KC_RCTL), + [_LAYER1] = LAYOUT_60_ansi( /* FN */ + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,\ + KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, MAGIC_TOGGLE_NKRO, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_LAYER2] = LAYOUT_60_ansi( /* FN2 */ + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ + KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, RESET ,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + }; + +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + + bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; + } diff --git a/keyboards/dztech/dz60rgb_ansi/readme.md b/keyboards/dztech/dz60rgb_ansi/readme.md new file mode 100644 index 0000000000..2fffa413b6 --- /dev/null +++ b/keyboards/dztech/dz60rgb_ansi/readme.md @@ -0,0 +1,15 @@ +# DZ60RGB + +![dz60rgb](https://cdn.shopify.com/s/files/1/0043/9140/3591/products/TIM_20190130170231_grande.jpg?v=1548839053) + +A hotswap 60% RGB keyboard. + +Keyboard Maintainer: DZtech +Hardware Supported: DZtech dz60rgb, dz60rgb-ansi +Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/) + +Make example for this keyboard (after setting up your build environment): + + make dztech/dz60rgb:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dztech/dz60rgb_ansi/rules.mk b/keyboards/dztech/dz60rgb_ansi/rules.mk new file mode 100644 index 0000000000..006541504a --- /dev/null +++ b/keyboards/dztech/dz60rgb_ansi/rules.mk @@ -0,0 +1,16 @@ +MCU = STM32F303 +DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +DFU_SUFFIX_ARGS = -p DF11 -v 0483 +BACKLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = no # USB Nkey Rollover +AUDIO_ENABLE = no +RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in + +LAYOUTS = 60_ansi \ No newline at end of file diff --git a/keyboards/dztech/dz60rgb_wkl/config.h b/keyboards/dztech/dz60rgb_wkl/config.h new file mode 100644 index 0000000000..44ff5f1570 --- /dev/null +++ b/keyboards/dztech/dz60rgb_wkl/config.h @@ -0,0 +1,39 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1219 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DZTECH + +#define PRODUCT DZ60RGB +#define DESCRIPTION DZ60 ARM RGB keyboard +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } +#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 } + +/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/ + +#define DIODE_DIRECTION COL2ROW + +#define DEBOUNCE 3 +#ifdef RGB_MATRIX_ENABLE +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_LED_PROCESS_LIMIT 4 +#define RGB_MATRIX_LED_FLUSH_LIMIT 26 +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 62 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#endif \ No newline at end of file diff --git a/keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.c b/keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.c new file mode 100644 index 0000000000..1c0edb7227 --- /dev/null +++ b/keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.c @@ -0,0 +1,116 @@ +#include "dz60rgb_wkl.h" +#ifdef RGB_MATRIX_ENABLE +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { + {0, H_15, G_15, I_15}, + {0, K_14, J_14, L_14}, + {0, K_13, J_13, L_13}, + {0, K_12, J_12, L_12}, + {0, K_11, J_11, L_11}, + {0, K_10, J_10, L_10}, + {0, K_9, J_9, L_9}, + {0, K_8, J_8, L_8}, + {0, K_7, J_7, L_7}, + {0, K_6, J_6, L_6}, + {0, K_5, J_5, L_5}, + {0, K_4, J_4, L_4}, + {0, K_3, J_3, L_3}, + {0, K_2, J_2, L_2}, + {0, K_1, J_1, L_1}, + {0, H_14, G_14, I_14}, + {0, H_13, G_13, I_13}, + {0, H_12, G_12, I_12}, + {0, H_11, G_11, I_11}, + {0, H_10, G_10, I_10}, + {0, H_9, G_9, I_9}, + {0, H_8, G_8, I_8}, + {0, H_7, G_7, I_7}, + {0, H_6, G_6, I_6}, + {0, H_5, G_5, I_5}, + {0, H_4, G_4, I_4}, + {0, H_3, G_3, I_3}, + {0, H_2, G_2, I_2}, + {0, H_1, G_1, I_1}, + {0, E_14, D_14, F_14}, + {0, E_12, D_12, F_12}, + {0, E_11, D_11, F_11}, + {0, E_10, D_10, F_10}, + {0, E_9, D_9, F_9}, + {0, E_8, D_8, F_8}, + {0, E_7, D_7, F_7}, + {0, E_6, D_6, F_6}, + {0, E_5, D_5, F_5}, + {0, E_4, D_4, F_4}, + {0, E_3, D_3, F_3}, + {0, E_2, D_2, F_2}, + {0, E_1, D_1, F_1}, + {0, B_14, A_14, C_14}, + {0, B_13, A_13, C_13}, + {0, B_11, A_11, C_11}, + {0, B_10, A_10, C_10}, + {0, B_9, A_9, C_9}, + {0, B_8, A_8, C_8}, + {0, B_7, A_7, C_7}, + {0, B_6, A_6, C_6}, + {0, B_5, A_5, C_5}, + {0, B_4, A_4, C_4}, + {0, B_3, A_3, C_3}, + {0, B_2, A_2, C_2}, + {0, B_1, A_1, C_1}, + {0, B_15, A_15, C_15}, + {0, E_13, D_13, F_13}, + {0, B_12, A_12, C_12}, + {0, B_16, A_16, C_16}, + {0, E_16, D_16, F_16}, + {0, H_16, G_16, I_16}, + {0, K_16, J_16, L_16}, +}; + +led_config_t g_led_config = { { + { 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1 }, + { 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15 }, + { 41, 40, 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 0, 29 }, + { 54, 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, NO_LED, 42 }, + { 61, 60, 59, NO_LED, NO_LED, 58, NO_LED, NO_LED, NO_LED, NO_LED, 57, 56, NO_LED, 55 } +}, { + { 224, 0 }, { 208, 0 }, { 192, 0 }, { 176, 0 }, { 160, 0 }, { 144, 0 }, { 128, 0 }, { 112, 0 }, { 96, 0 }, { 80, 0 }, { 64, 0 }, { 48, 0 }, { 32, 0 }, { 16, 0 }, + { 0, 0 }, { 220, 16 }, { 200, 16 }, { 184, 16 }, { 168, 16 }, { 152, 16 }, { 136, 16 }, { 120, 16 }, { 104, 16 }, { 88, 16 }, { 72, 16 }, { 56, 16 }, { 40, 16 }, { 24, 16 }, + { 4, 16 }, { 204, 32 }, { 188, 32 }, { 172, 32 }, { 156, 32 }, { 140, 32 }, { 124, 32 }, { 108, 32 }, { 92, 32 }, { 76, 32 }, { 60, 32 }, { 44, 32 }, { 28, 32 }, { 6, 32 }, + { 224, 48 }, { 202, 48 }, { 180, 48 }, { 164, 48 }, { 148, 48 }, { 132, 48 }, { 116, 48 }, { 100, 48 }, { 84, 48 }, { 68, 48 }, { 52, 48 }, { 20, 48 }, { 10, 48 }, { 218, 64 }, + { 198, 64 }, { 178, 64 }, { 112, 64 }, { 46, 64 }, { 26, 64 }, { 6, 64 } +}, { + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, + 1, 1, 4, 1, 1, 1 +} }; +#endif +void matrix_init_kb(void) { + matrix_init_user(); +} +void matrix_scan_kb(void) { + matrix_scan_user(); +} +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + return process_record_user(keycode, record); +} +void suspend_power_down_kb(void) +{ + rgb_matrix_set_suspend_state(true); + suspend_power_down_user(); +} + +void suspend_wakeup_init_kb(void) +{ + rgb_matrix_set_suspend_state(false); + suspend_wakeup_init_user(); +} + +__attribute__ ((weak)) +void rgb_matrix_indicators_user(void) +{ + if (IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) + { + rgb_matrix_set_color(41, 0xFF, 0xFF, 0xFF); + } +} diff --git a/keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.h b/keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.h new file mode 100644 index 0000000000..f017b94cb5 --- /dev/null +++ b/keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.h @@ -0,0 +1,16 @@ +#pragma once +#define XXX KC_NO +#include "quantum.h" +#define LAYOUT_HHKB( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,\ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,\ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D,\ + K40, K41, K42, K45, K4A, K4B, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D}, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \ + { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, XXX, K4A, K4B, XXX, K4D } \ +} diff --git a/keyboards/dztech/dz60rgb_wkl/info.json b/keyboards/dztech/dz60rgb_wkl/info.json new file mode 100644 index 0000000000..4c3c3681bc --- /dev/null +++ b/keyboards/dztech/dz60rgb_wkl/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "dz60rgb_wkl", + "url": "", + "maintainer": "dztech", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT_HHKB": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}] + } + } +} \ No newline at end of file diff --git a/keyboards/dztech/dz60rgb_wkl/keymaps/default/keymap.c b/keyboards/dztech/dz60rgb_wkl/keymaps/default/keymap.c new file mode 100644 index 0000000000..f2de98df02 --- /dev/null +++ b/keyboards/dztech/dz60rgb_wkl/keymaps/default/keymap.c @@ -0,0 +1,37 @@ +#include QMK_KEYBOARD_H +#define _LAYER0 0 +#define _LAYER1 1 +#define _LAYER2 2 +#define _LAYER3 3 +#define _LAYER4 4 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT_HHKB( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_DEL, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, MO(1), KC_RCTL), + [_LAYER1] = LAYOUT_HHKB( /* FN */ + KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS,\ + KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, MAGIC_TOGGLE_NKRO, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_LAYER2] = LAYOUT_HHKB( /* FN2 */ + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ + KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, RESET ,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + }; +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + + bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; + } diff --git a/keyboards/dztech/dz60rgb_wkl/readme.md b/keyboards/dztech/dz60rgb_wkl/readme.md new file mode 100644 index 0000000000..2fffa413b6 --- /dev/null +++ b/keyboards/dztech/dz60rgb_wkl/readme.md @@ -0,0 +1,15 @@ +# DZ60RGB + +![dz60rgb](https://cdn.shopify.com/s/files/1/0043/9140/3591/products/TIM_20190130170231_grande.jpg?v=1548839053) + +A hotswap 60% RGB keyboard. + +Keyboard Maintainer: DZtech +Hardware Supported: DZtech dz60rgb, dz60rgb-ansi +Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/) + +Make example for this keyboard (after setting up your build environment): + + make dztech/dz60rgb:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dztech/dz60rgb_wkl/rules.mk b/keyboards/dztech/dz60rgb_wkl/rules.mk new file mode 100644 index 0000000000..ed30bec8b6 --- /dev/null +++ b/keyboards/dztech/dz60rgb_wkl/rules.mk @@ -0,0 +1,14 @@ +MCU = STM32F303 +DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +DFU_SUFFIX_ARGS = -p DF11 -v 0483 +BACKLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = no # USB Nkey Rollover +AUDIO_ENABLE = no +RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in \ No newline at end of file diff --git a/keyboards/dztech/dz65rgb/config.h b/keyboards/dztech/dz65rgb/config.h index f4c1f11149..611e57d586 100644 --- a/keyboards/dztech/dz65rgb/config.h +++ b/keyboards/dztech/dz65rgb/config.h @@ -12,18 +12,35 @@ #define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } #define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14, C15 } #define DIODE_DIRECTION COL2ROW - +#ifdef RGB_MATRIX_ENABLE #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 #define DEBOUNCE 3 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES -#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 - +#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define DISABLE_RGB_MATRIX_BAND_SAT +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b1110100 #define DRIVER_ADDR_2 0b1110111 #define DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 35 #define DRIVER_2_LED_TOTAL 33 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#endif \ No newline at end of file diff --git a/keyboards/dztech/dz65rgb/dz65rgb.c b/keyboards/dztech/dz65rgb/dz65rgb.c index 766aea26c4..8f095960d4 100644 --- a/keyboards/dztech/dz65rgb/dz65rgb.c +++ b/keyboards/dztech/dz65rgb/dz65rgb.c @@ -1,98 +1,102 @@ #include "dz65rgb.h" +#ifdef RGB_MATRIX_ENABLE const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { - {0, C2_1, C3_1, C4_1}, // LA0 - {0, C1_1, C3_2, C4_2}, // LA1 - {0, C1_2, C2_2, C4_3}, // LA2 - {0, C1_3, C2_3, C3_3}, // LA3 - {0, C1_4, C2_4, C3_4}, // LA4 - {0, C1_5, C2_5, C3_5}, // LA5 - {0, C1_6, C2_6, C3_6}, // LA6 - {0, C1_7, C2_7, C3_7}, // LA7 - {0, C1_8, C2_8, C3_8}, // LA8 - {0, C9_1, C8_1, C7_1}, // LA9 - {0, C9_2, C8_2, C7_2}, // LA10 - {0, C9_3, C8_3, C7_3}, // LA11 - {0, C9_4, C8_4, C7_4}, // LA12 - {0, C9_5, C8_5, C7_5}, // LA13 - {0, C9_6, C8_6, C7_6}, // LA14 - {0, C9_7, C8_7, C6_6}, // LA15 - {0, C9_8, C7_7, C6_7}, // LA16 + {0, C8_8, C7_8, C6_8}, // LA17 + {0, C9_8, C7_7, C6_7}, // LA16 + {0, C9_7, C8_7, C6_6}, // LA15 + {0, C9_6, C8_6, C7_6}, // LA14 + {0, C9_5, C8_5, C7_5}, // LA13 + {0, C9_4, C8_4, C7_4}, // LA12 + {0, C9_3, C8_3, C7_3}, // LA11 + {0, C9_2, C8_2, C7_2}, // LA10 + {0, C9_1, C8_1, C7_1}, // LA9 {0, C2_9, C3_9, C4_9}, // LB0 {0, C1_9, C3_10, C4_10}, // LB1 {0, C1_10, C2_10, C4_11}, // LB2 {0, C1_11, C2_11, C3_11}, // LB3 - //{0, C1_12, C2_12, C3_12}, // LB4 {0, C1_13, C2_13, C3_13}, // LB5 {0, C1_14, C2_14, C3_14}, // LB6 - {0, C1_15, C2_15, C3_15}, // LB7 - {0, C1_16, C2_16, C3_16}, // LB8 + + {0, C1_7, C2_7, C3_7}, // LA7 + {0, C1_6, C2_6, C3_6}, // LA6 + {0, C1_5, C2_5, C3_5}, // LA5 + {0, C1_4, C2_4, C3_4}, // LA4 + {0, C1_3, C2_3, C3_3}, // LA3 + {0, C1_2, C2_2, C4_3}, // LA2 + {0, C1_1, C3_2, C4_2}, // LA1 + {0, C2_1, C3_1, C4_1}, // LA0 {0, C9_9, C8_9, C7_9}, // LB9 {0, C9_10, C8_10, C7_10}, // LB10 {0, C9_11, C8_11, C7_11}, // LB11 {0, C9_12, C8_12, C7_12}, // LB12 {0, C9_13, C8_13, C7_13}, // LB13 {0, C9_14, C8_14, C7_14}, // LB14 - {0, C9_15, C8_15, C6_14}, // LB15 - {0, C9_16, C7_15, C6_15}, // LB16 - {0, C8_16, C7_16, C6_16}, // LB17 - {1, C2_1, C3_1, C4_1}, // LC0 - {1, C1_1, C3_2, C4_2}, // LC1 - {1, C1_2, C2_2, C4_3}, // LC2 - {1, C1_3, C2_3, C3_3}, // LC3 - {1, C1_4, C2_4, C3_4}, // LC4 - {1, C1_5, C2_5, C3_5}, // LC5 - //{1, C1_6, C2_6, C3_6}, // LC6 - {1, C1_7, C2_7, C3_7}, // LC7 - {1, C1_8, C2_8, C3_8}, // LC8 - {1, C9_1, C8_1, C7_1}, // LC9 - {1, C9_2, C8_2, C7_2}, // LC10 - {1, C9_3, C8_3, C7_3}, // LC11 - {1, C9_4, C8_4, C7_4}, // LC12 - {1, C9_5, C8_5, C7_5}, // LC13 + {0, C1_15, C2_15, C3_15}, // LB7 + + {0, C1_8, C2_8, C3_8}, // LA8 {1, C9_6, C8_6, C7_6}, // LC14 - //{1, C9_7, C8_7, C6_6}, // LC15 - {1, C9_8, C7_7, C6_7}, // LC16 - {1, C8_8, C7_8, C6_8}, // LC17 + {1, C9_5, C8_5, C7_5}, // LC13 + {1, C9_4, C8_4, C7_4}, // LC12 + {1, C9_3, C8_3, C7_3}, // LC11 + {1, C9_2, C8_2, C7_2}, // LC10 + {1, C9_1, C8_1, C7_1}, // LC9 {1, C2_9, C3_9, C4_9}, // LD0 {1, C1_9, C3_10, C4_10}, // LD1 {1, C1_10, C2_10, C4_11}, // LD2 {1, C1_11, C2_11, C3_11}, // LD3 {1, C1_12, C2_12, C3_12}, // LD4 {1, C1_13, C2_13, C3_13}, // LD5 - {1, C1_14, C2_14, C3_14}, // LD6 - {1, C1_15, C2_15, C3_15}, // LD7 - {1, C1_16, C2_16, C3_16}, // LD8 + {0, C1_16, C2_16, C3_16}, // LB8 + + {1, C9_8, C7_7, C6_7}, // LC16 + {1, C1_5, C2_5, C3_5}, // LC5 + {1, C1_4, C2_4, C3_4}, // LC4 + {1, C1_3, C2_3, C3_3}, // LC3 + {1, C1_2, C2_2, C4_3}, // LC2 + {1, C1_1, C3_2, C4_2}, // LC1 {1, C9_9, C8_9, C7_9}, // LD9 {1, C9_10, C8_10, C7_10}, // LD10 {1, C9_11, C8_11, C7_11}, // LD11 {1, C9_12, C8_12, C7_12}, // LD12 - //{1, C9_13, C8_13, C7_13}, // LD13 + {1, C1_14, C2_14, C3_14}, // LD6 + {1, C1_15, C2_15, C3_15}, // LD7 + {1, C1_16, C2_16, C3_16}, // LD8 + {0, C9_15, C8_15, C6_14}, // LB15 + + {1, C8_8, C7_8, C6_8}, // LC17 + {1, C1_8, C2_8, C3_8}, // LC8 + {1, C1_7, C2_7, C3_7}, // LC7 + {1, C2_1, C3_1, C4_1}, // LC0 {1, C9_14, C8_14, C7_14}, // LD14 {1, C9_15, C8_15, C6_14}, // LD15 {1, C9_16, C7_15, C6_15}, // LD16 {1, C8_16, C7_16, C6_16}, // LD17 + {0, C8_16, C7_16, C6_16}, // LB17 + {0, C9_16, C7_15, C6_15}, // LB16 + }; led_config_t g_led_config = { { - { 17, 16, 15, 14, 13, 12, 11, 10, 9, 18, 19, 20, 21, 22, 23 }, - { 7, 6, 5, 4, 3, 2, 1, 0, 26, 27, 28, 29, 30, 31, 24 }, - { 8, 48, 47, 46, 45, 44, 43, 51, 52, 53, 54, 55, NO_LED, 56, 25 }, - { 49, 40, 39, 38, 37, 36, 60, 61, 62, 63, 57, 58, NO_LED, 59, 32 }, - { 50, 42, 41, NO_LED, NO_LED, 35, NO_LED, NO_LED, 64, 65, 66, 67, NO_LED, 34, 33 } + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 }, + { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 }, + { 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, NO_LED,42, 43 }, + { 44, 45, 46, 47, 48, 49, 59, 51, 52, 53, 54, 55, NO_LED,56, 57 }, + { 58, 59, 60, NO_LED,NO_LED,61, NO_LED,NO_LED,62, 63, 64, 65, NO_LED,66, 67 } }, { - { 112, 16 }, { 96, 16 }, { 80, 16 }, { 64, 16 }, { 48, 16 }, { 32, 16 }, { 16, 16 }, { 0, 16 }, { 0, 32 }, { 128, 0 }, { 112, 0 }, { 96, 0 }, { 80, 0 }, { 64, 0 }, { 48, 0 }, - { 32, 0 }, { 16, 0 }, { 0, 0 }, { 144, 0 }, { 160, 0 }, { 176, 0 }, { 192, 0 }, { 208, 0 }, { 224, 0 }, { 224, 16 }, { 224, 32 }, { 128, 16 }, { 144, 16 }, { 160, 16 }, { 176, 16 }, - { 192, 16 }, { 208, 16 }, { 224, 48 }, { 224, 64 }, { 208, 64 }, { 80, 64 }, { 80, 48 }, { 64, 48 }, { 48, 48 }, { 32, 48 }, { 16, 48 }, { 32, 64 }, { 16, 64 }, { 96, 32 }, { 80, 32 }, - { 64, 32 }, { 48, 32 }, { 32, 32 }, { 16, 32 }, { 0, 48 }, { 0, 64 }, { 112, 32 }, { 128, 32 }, { 144, 32 }, { 160, 32 }, { 176, 32 }, { 208, 32 }, { 160, 48 }, { 176, 48 }, { 208, 48 }, - { 96, 48 }, { 112, 48 }, { 128, 48 }, { 144, 48 }, { 128, 64 }, { 144, 64 }, { 160, 64 }, { 176, 64 } + {0,0}, {15,0}, {30,0}, {45,0}, {60,0}, {75,0}, {90,0}, {105,0}, {120,0}, {135,0}, {150,0}, {165,0}, {180,0}, {203,0},{224,0}, + {4,16},{23,16},{38,16},{53,16},{68,16}, {83,16}, {98,16}, {113,16},{128,16},{143,16},{158,16},{173,16},{188,16},{206,16},{224,16}, + {6,32},{26,32},{41,32},{56,32},{71,32}, {86,32}, {101,32},{116,32},{131,32},{146,32},{161,32},{176,32},{201,32},{224,32}, + {9,48},{34,48},{49,48},{64,48},{79,48}, {94,48}, {109,48},{124,48},{139,48},{154,48},{169,48},{189,48},{210,48},{224,48}, + {2,64},{21,64},{39,64},{96,64},{150,64},{165,64},{180,64},{195,64},{210,64},{224,64} }, { - 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 4, 4, 4, 4, - 4, 4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 1, 1, 4, 4, - 4, 4, 4, 4, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, - 4, 4, 4, 4, 1, 1, 1, 1 + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 1, 1, 4, 1, 1, 1, 1, 1, 1 } }; +#endif void matrix_init_kb(void) { matrix_init_user(); @@ -118,8 +122,8 @@ void suspend_wakeup_init_kb(void) __attribute__ ((weak)) void rgb_matrix_indicators_user(void) { - if (IS_LED_ON(host_keyboard_leds(), USB_LED_CAPS_LOCK)) + if (IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) { - rgb_matrix_set_color(8, 0xFF, 0xFF, 0xFF); + rgb_matrix_set_color(30, 0xFF, 0xFF, 0xFF); } } diff --git a/keyboards/dztech/dz65rgb/keymaps/default/keymap.c b/keyboards/dztech/dz65rgb/keymaps/default/keymap.c index 90f25c0e46..7f1416f1e7 100644 --- a/keyboards/dztech/dz65rgb/keymaps/default/keymap.c +++ b/keyboards/dztech/dz65rgb/keymaps/default/keymap.c @@ -12,7 +12,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_HOME,\ KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI,RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET, KC_PGUP,\ CTL_T(KC_CAPS),RGB_SPI, RGB_SPD, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, EEP_RST, KC_PGDN,\ - KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MUTE,\ + KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, MAGIC_TOGGLE_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MUTE,\ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), }; diff --git a/keyboards/dztech/dz65rgb/keymaps/matthewrobo/config.h b/keyboards/dztech/dz65rgb/keymaps/matthewrobo/config.h index babc2abcf5..a56af01656 100644 --- a/keyboards/dztech/dz65rgb/keymaps/matthewrobo/config.h +++ b/keyboards/dztech/dz65rgb/keymaps/matthewrobo/config.h @@ -6,7 +6,7 @@ #define TAPPING_TERM 150 #define TAP_HOLD_CAPS_DELAY 0 - +#undef RGB_MATRIX_STARTUP_MODE #define RGB_MATRIX_FRAMEBUFFER_EFFECTS // #define DISABLE_RGB_MATRIX_SOLID_COLOR diff --git a/keyboards/geekboards/tester/config.h b/keyboards/geekboards/tester/config.h index ac67877ffc..8a6cc09a12 100644 --- a/keyboards/geekboards/tester/config.h +++ b/keyboards/geekboards/tester/config.h @@ -23,6 +23,7 @@ #define LOCKING_RESYNC_ENABLE #define DEBOUNCE 3 +#ifdef RGB_MATRIX_ENABLE #define RGB_DISABLE_AFTER_TIMEOUT 0 #define RGB_DISABLE_WHEN_USB_SUSPENDED true #define RGB_MATRIX_KEYPRESSES @@ -32,8 +33,8 @@ #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH #define DRIVER_ADDR_1 0b1110100 #define DRIVER_ADDR_2 0b1110101 - #define DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 8 #define DRIVER_2_LED_TOTAL 0 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#endif \ No newline at end of file diff --git a/keyboards/kbdfans/kbd19x/config.h b/keyboards/kbdfans/kbd19x/config.h index d722dc2615..3fcda998c2 100644 --- a/keyboards/kbdfans/kbd19x/config.h +++ b/keyboards/kbdfans/kbd19x/config.h @@ -47,11 +47,10 @@ along with this program. If not, see . /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - #define BACKLIGHT_PIN B6 -// #define BACKLIGHT_BREATHING +#ifdef BACKLIGHT_PIN #define BACKLIGHT_LEVELS 3 - +#endif #define RGB_DI_PIN E2 #ifdef RGB_DI_PIN #define RGBLIGHT_ANIMATIONS @@ -59,6 +58,7 @@ along with this program. If not, see . #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_SLEEP #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ diff --git a/keyboards/kbdfans/kbd4x/config.h b/keyboards/kbdfans/kbd4x/config.h index 07bc4b9901..6928ea8ff9 100644 --- a/keyboards/kbdfans/kbd4x/config.h +++ b/keyboards/kbdfans/kbd4x/config.h @@ -47,11 +47,11 @@ along with this program. If not, see . /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - #define BACKLIGHT_PIN B6 +#ifdef BACKLIGHT_PIN #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 - +#endif #define RGB_DI_PIN E2 #ifdef RGB_DI_PIN #define RGBLIGHT_ANIMATIONS @@ -59,6 +59,7 @@ along with this program. If not, see . #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_SLEEP #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ diff --git a/keyboards/kbdfans/kbd66/config.h b/keyboards/kbdfans/kbd66/config.h index a2666a6197..5d6cab4586 100644 --- a/keyboards/kbdfans/kbd66/config.h +++ b/keyboards/kbdfans/kbd66/config.h @@ -47,12 +47,12 @@ along with this program. If not, see . /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - #define BACKLIGHT_PIN B6 +#ifdef BACKLIGHT_PIN #define BACKLIGHT_LEVELS 3 #define BACKLIGHT_BREATHING #define BREATHING_PERIOD 6 - +#endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/kbdfans/kbd67/hotswap/config.h b/keyboards/kbdfans/kbd67/hotswap/config.h index fca9916ed9..589d76da36 100644 --- a/keyboards/kbdfans/kbd67/hotswap/config.h +++ b/keyboards/kbdfans/kbd67/hotswap/config.h @@ -54,9 +54,10 @@ along with this program. If not, see . #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 #define BACKLIGHT_PIN B7 +#ifdef BACKLIGHT_PIN #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 - +#endif #define RGB_DI_PIN B4 #ifdef RGB_DI_PIN #define RGBLED_NUM 8 @@ -67,6 +68,7 @@ along with this program. If not, see . // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // /*== all animations enable ==*/ #define RGBLIGHT_ANIMATIONS + #define RGBLIGHT_SLEEP // /*== or choose animations ==*/ // #define RGBLIGHT_EFFECT_BREATHING // #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/kbdfans/kbd67/mkii_soldered/config.h b/keyboards/kbdfans/kbd67/mkii_soldered/config.h index 6a726af061..df0607b249 100644 --- a/keyboards/kbdfans/kbd67/mkii_soldered/config.h +++ b/keyboards/kbdfans/kbd67/mkii_soldered/config.h @@ -54,9 +54,10 @@ along with this program. If not, see . //#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 #define BACKLIGHT_PIN B7 +#ifdef BACKLIGHT_PIN #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 - +#endif //#define RGB_DI_PIN B3 //#ifdef RGB_DI_PIN // #define RGBLED_NUM 20 diff --git a/keyboards/kbdfans/kbd67/mkiirgb/config.h b/keyboards/kbdfans/kbd67/mkiirgb/config.h index 5ef18fcc79..b60685e2b0 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/config.h +++ b/keyboards/kbdfans/kbd67/mkiirgb/config.h @@ -19,11 +19,27 @@ #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES -#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 -#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define DISABLE_RGB_MATRIX_BAND_SAT +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b1110100 #define DRIVER_ADDR_2 0b1110111 #define DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 35 #define DRIVER_2_LED_TOTAL 32 -#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) \ No newline at end of file diff --git a/keyboards/kbdfans/kbd67/mkiirgb/keymaps/default/keymap.c b/keyboards/kbdfans/kbd67/mkiirgb/keymaps/default/keymap.c index 17bf4ec991..99556b7ef0 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/keymaps/default/keymap.c +++ b/keyboards/kbdfans/kbd67/mkiirgb/keymaps/default/keymap.c @@ -15,15 +15,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MUTE,\ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), }; - -void rgb_matrix_indicators_user(void) -{ - if (IS_LED_ON(host_keyboard_leds(), USB_LED_CAPS_LOCK)) - { - rgb_matrix_set_color(30, 0xFF, 0xFF, 0xFF); - } -} - void matrix_init_user(void) { //user initialization diff --git a/keyboards/kbdfans/kbd67/mkiirgb/mkiirgb.c b/keyboards/kbdfans/kbd67/mkiirgb/mkiirgb.c index 430dca9524..526949e6fe 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/mkiirgb.c +++ b/keyboards/kbdfans/kbd67/mkiirgb/mkiirgb.c @@ -117,3 +117,15 @@ void suspend_wakeup_init_kb(void) rgb_matrix_set_suspend_state(false); suspend_wakeup_init_user(); } + +__attribute__ ((weak)) +void rgb_matrix_indicators_user(void) +{ + if (IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) + { + rgb_matrix_set_color(30, 0xFF, 0xFF, 0xFF); + } +} + + + diff --git a/keyboards/kbdfans/kbd67/rev1/config.h b/keyboards/kbdfans/kbd67/rev1/config.h index 7a26192f4a..d20dcb1c57 100644 --- a/keyboards/kbdfans/kbd67/rev1/config.h +++ b/keyboards/kbdfans/kbd67/rev1/config.h @@ -49,9 +49,10 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN B6 +#ifdef BACKLIGHT_PIN #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 - +#endif #define RGB_DI_PIN E2 #ifdef RGB_DI_PIN #define RGBLED_NUM 20 @@ -62,6 +63,7 @@ along with this program. If not, see . // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ #define RGBLIGHT_ANIMATIONS + #define RGBLIGHT_SLEEP /*== or choose animations ==*/ // #define RGBLIGHT_EFFECT_BREATHING // #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/kbdfans/kbd67/rev2/config.h b/keyboards/kbdfans/kbd67/rev2/config.h index d4e200fa8e..931f5714b8 100644 --- a/keyboards/kbdfans/kbd67/rev2/config.h +++ b/keyboards/kbdfans/kbd67/rev2/config.h @@ -61,4 +61,5 @@ along with this program. If not, see . #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_LIMIT_VAL 240 +#define RGBLIGHT_SLEEP #endif diff --git a/keyboards/kbdfans/kbd6x/config.h b/keyboards/kbdfans/kbd6x/config.h index 1ee31e5690..61d086fbd5 100644 --- a/keyboards/kbdfans/kbd6x/config.h +++ b/keyboards/kbdfans/kbd6x/config.h @@ -47,11 +47,11 @@ along with this program. If not, see . /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - #define BACKLIGHT_PIN B7 +#ifdef BACKLIGHT_PIN #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 - +#endif #define RGB_DI_PIN F0 #ifdef RGB_DI_PIN #define RGBLIGHT_ANIMATIONS @@ -59,6 +59,7 @@ along with this program. If not, see . #define RGBLIGHT_HUE_STEP 12 #define RGBLIGHT_SAT_STEP 12 #define RGBLIGHT_VAL_STEP 12 +#define RGBLIGHT_SLEEP #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ diff --git a/keyboards/kbdfans/kbd75/config.h b/keyboards/kbdfans/kbd75/config.h index 83fd8cbdae..09ef6a2f31 100644 --- a/keyboards/kbdfans/kbd75/config.h +++ b/keyboards/kbdfans/kbd75/config.h @@ -44,6 +44,7 @@ #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ #define RGBLIGHT_SLEEP #endif diff --git a/keyboards/kbdfans/kbd8x/config.h b/keyboards/kbdfans/kbd8x/config.h index bdd3104407..5c16274942 100644 --- a/keyboards/kbdfans/kbd8x/config.h +++ b/keyboards/kbdfans/kbd8x/config.h @@ -47,11 +47,11 @@ along with this program. If not, see . /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - #define BACKLIGHT_PIN B6 +#ifdef BACKLIGHT_PIN #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 - +#endif #define RGB_DI_PIN E2 #ifdef RGB_DI_PIN #define RGBLIGHT_ANIMATIONS @@ -59,6 +59,7 @@ along with this program. If not, see . #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_SLEEP #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ diff --git a/keyboards/kbdfans/kbd8x_mk2/config.h b/keyboards/kbdfans/kbd8x_mk2/config.h index 4c6900b6ca..3e07ad60c6 100644 --- a/keyboards/kbdfans/kbd8x_mk2/config.h +++ b/keyboards/kbdfans/kbd8x_mk2/config.h @@ -52,11 +52,11 @@ along with this program. If not, see . * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - #define BACKLIGHT_PIN B7 +#ifdef BACKLIGHT_PIN #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 - +#endif #define RGB_DI_PIN B3 #ifdef RGB_DI_PIN #define RGBLED_NUM 20 diff --git a/keyboards/kbdfans/kbdmini/config.h b/keyboards/kbdfans/kbdmini/config.h new file mode 100644 index 0000000000..0fc7b5acb8 --- /dev/null +++ b/keyboards/kbdfans/kbdmini/config.h @@ -0,0 +1,47 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x2001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DZTECH + +#define PRODUCT KBDMINI +#define DESCRIPTION KBDMINI RGB keyboard +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +#define MATRIX_ROW_PINS {B7, E6, F5, F4} +#define MATRIX_COL_PINS {B3, B2, B1, B0, F1, F0, C6, B6, B5, B4, D7, D6, D4} +#define UNUSED_PINS +#define DIODE_DIRECTION COL2ROW + +#define DEBOUNCE 3 +#ifdef RGB_MATRIX_ENABLE +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define DISABLE_RGB_MATRIX_BAND_SAT +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 52 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#endif \ No newline at end of file diff --git a/keyboards/kbdfans/kbdmini/kbdmini.c b/keyboards/kbdfans/kbdmini/kbdmini.c new file mode 100644 index 0000000000..b402eed64f --- /dev/null +++ b/keyboards/kbdfans/kbdmini/kbdmini.c @@ -0,0 +1,96 @@ +#include "kbdmini.h" +#include "config.h" +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { + {0, B_9, A_9, C_9}, //LA33 + {0, B_10, A_10, C_10}, //LA37 + {0, B_11, A_11, C_11}, //LA41 + {0, B_12, A_12, C_12}, //LA45 + {0, B_13, A_13, C_13}, //LA49 + {0, B_14, A_14, C_14}, //LA53 + {0, B_15, A_15, C_15}, //LA57 + {0, B_6, A_6, C_6}, //LA21 + {0, B_5, A_5, C_5}, //LA17 + {0, B_4, A_4, C_4}, //LA13 + {0, B_3, A_3, C_3}, //LA9 + {0, B_2, A_2, C_2}, //LA5 + {0, B_1, A_1, C_1}, //LA1 + + {0, E_9, D_9, F_9}, //LA34 + {0, E_10, D_10, F_10}, //LA38 + {0, E_11, D_11, F_11}, //LA42 + {0, E_12, D_12, F_12}, //LA46 + {0, E_13, D_13, F_13}, //LA50 + {0, E_14, D_14, F_14}, //LA54 + {0, E_15, D_15, F_15}, //LA58 + {0, E_6, D_6, F_6}, //LA22 + {0, E_5, D_5, F_5}, //LA18 + {0, E_4, D_4, F_4}, //LA14 + {0, E_3, D_3, F_3}, //LA10 + {0, E_2, D_2, F_2}, //LA6 + {0, E_1, D_1, F_1}, //LA2 + + {0, H_9, G_9, I_9}, //LA35 + {0, H_10, G_10, I_10}, //LA39 + {0, H_11, G_11, I_11}, //LA43 + {0, H_12, G_12, I_12}, //LA47 + {0, H_13, G_13, I_13}, //LA51 + {0, H_14, G_14, I_14}, //LA55 + {0, H_15, G_15, I_15}, //LA59 + {0, H_6, G_6, I_6}, //LA23 + {0, H_5, G_5, I_5}, //LA19 + {0, H_4, G_4, I_4}, //LA15 + {0, H_3, G_3, I_3}, //LA11 + {0, H_2, G_2, I_2}, //LA7 + {0, H_1, G_1, I_1}, //LA3 + + {0, K_9, J_9, L_9}, //LA36 + {0, K_10, J_10, L_10}, //LA40 + {0, K_11, J_11, L_11}, //LA44 + {0, K_12, J_12, L_12}, //LA48 + {0, K_13, J_13, L_13}, //LA52 + {0, K_14, J_14, L_14}, //LA56 + {0, K_15, J_15, L_15}, //LA60 + {0, K_6, J_6, L_6}, //LA24 + {0, K_5, J_5, L_5}, //LA20 + {0, K_4, J_4, L_4}, //LA16 + {0, K_3, J_3, L_3}, //LA12 + {0, K_2, J_2, L_2}, //LA8 + {0, K_1, J_1, L_1}//LA4 +}; + +led_config_t g_led_config = { { + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12}, + { 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25}, + { 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38}, + { 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51} +}, { + { 0, 0 }, { 19, 0 }, { 38, 0 }, { 57, 0 }, { 76, 0 }, { 95, 0 }, { 114, 0 }, { 133, 0 }, { 152, 0 }, { 171, 0 }, { 190, 0 }, { 209, 0 }, { 224, 0 }, + { 0, 21 }, { 19, 21 }, { 38, 21 }, { 57, 21 }, { 76, 21 }, { 95, 21 }, { 114, 21 }, { 133, 21 }, { 152, 21 }, { 171, 21 }, { 190, 21 }, { 209, 21 }, { 224, 21 }, + { 0, 42 }, { 19, 42 }, { 38, 42 }, { 57, 42 }, { 76, 42 }, { 95, 42 }, { 114, 42 }, { 133, 42 }, { 152, 42 }, { 171, 42 }, { 190, 42 }, { 209, 42 }, { 224, 42 }, + { 0, 64 }, { 19, 64 }, { 38, 64 }, { 57, 64 }, { 76, 64 }, { 95, 64 }, { 114, 64 }, { 133, 64 }, { 152, 64 }, { 171, 64 }, { 190, 64 }, { 209, 64 }, { 224, 64 } +}, { + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 +} }; +void matrix_init_kb(void) { + matrix_init_user(); +} +void matrix_scan_kb(void) { + matrix_scan_user(); +} +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + return process_record_user(keycode, record); +} +void suspend_power_down_kb(void) +{ + rgb_matrix_set_suspend_state(true); + suspend_power_down_user(); +} + +void suspend_wakeup_init_kb(void) +{ + rgb_matrix_set_suspend_state(false); + suspend_wakeup_init_user(); +} diff --git a/keyboards/kbdfans/kbdmini/kbdmini.h b/keyboards/kbdfans/kbdmini/kbdmini.h new file mode 100644 index 0000000000..38596a569e --- /dev/null +++ b/keyboards/kbdfans/kbdmini/kbdmini.h @@ -0,0 +1,15 @@ +#pragma once +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,\ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,\ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C } \ +} + diff --git a/keyboards/kbdfans/kbdmini/keymaps/default/keymap.c b/keyboards/kbdfans/kbdmini/keymaps/default/keymap.c new file mode 100644 index 0000000000..9c8267147c --- /dev/null +++ b/keyboards/kbdfans/kbdmini/keymaps/default/keymap.c @@ -0,0 +1,9 @@ +#include QMK_KEYBOARD_H +#define _LAYER0 0 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSPC, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_ENT, + KC_F5, KC_CAPS, KC_LCTL, KC_LGUI, KC_F1, KC_SPC,KC_F2, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), +}; diff --git a/keyboards/kbdfans/kbdmini/readme.md b/keyboards/kbdfans/kbdmini/readme.md new file mode 100644 index 0000000000..e01684f138 --- /dev/null +++ b/keyboards/kbdfans/kbdmini/readme.md @@ -0,0 +1,13 @@ +# KBDMINI + +![KBDMINI](imgur.com image replace me!) + +Keyboard Maintainer: [DZTECH](https://github.com/moyi4681) +Hardware Supported: KBDMINI +Hardware Availability: [KBDFans](https://kbdfans.cn/) + +Make example for this keyboard (after setting up your build environment): + + make kbdfans/kbdmini:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbdmini/rules.mk b/keyboards/kbdfans/kbdmini/rules.mk new file mode 100644 index 0000000000..28178d6584 --- /dev/null +++ b/keyboards/kbdfans/kbdmini/rules.mk @@ -0,0 +1,33 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/kbdfans/kbdpad_mk2/config.h b/keyboards/kbdfans/kbdpad_mk2/config.h index e3b91e1a1b..a7dae0a703 100644 --- a/keyboards/kbdfans/kbdpad_mk2/config.h +++ b/keyboards/kbdfans/kbdpad_mk2/config.h @@ -54,9 +54,10 @@ along with this program. If not, see . #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 #define BACKLIGHT_PIN B7 +#ifdef BACKLIGHT_PIN #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 5 - +#endif #define RGB_DI_PIN B5 #ifdef RGB_DI_PIN #define RGBLED_NUM 16 diff --git a/keyboards/xbows/knight/config.h b/keyboards/xbows/knight/config.h index 6dc32db48e..1e561642f7 100644 --- a/keyboards/xbows/knight/config.h +++ b/keyboards/xbows/knight/config.h @@ -24,8 +24,10 @@ /* number of backlight levels */ // #define BACKLIGHT_LEVELS 3 #define BACKLIGHT_PIN B7 +#ifdef BACKLIGHT_PIN #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 +#endif /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 diff --git a/keyboards/xbows/woody/config.h b/keyboards/xbows/woody/config.h index bf59031376..985f3acb16 100644 --- a/keyboards/xbows/woody/config.h +++ b/keyboards/xbows/woody/config.h @@ -12,7 +12,7 @@ #define MATRIX_ROW_PINS {B3, B2, B1, B0, B5 } #define MATRIX_COL_PINS {B6, C6, C7, F4, F5, F6, F7, B7, D2, D3, D5, D4, D6, D7, B4 } #define DIODE_DIRECTION COL2ROW - +#ifdef RGB_MATRIX_ENABLE #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 #define DEBOUNCE 3 @@ -41,3 +41,4 @@ #define DRIVER_1_LED_TOTAL 35 #define DRIVER_2_LED_TOTAL 32 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#endif \ No newline at end of file -- cgit v1.2.3 From 6b18ca2875ceb38011f32f2d17238ba55ce7ad67 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 17 Nov 2019 08:12:57 -0800 Subject: Add Community Layout: 60_abnt2 (#7381) * Add Community Layout: 60_abnt2 Add a 60% version of the standard keyboard layout used in Brazil. * Enable 60_abnt2 support for DZ60 * fix the indenting in the Community Layout keymap --- keyboards/dz60/rules.mk | 2 +- layouts/default/60_abnt2/default_60_abnt2/keymap.c | 22 +++++++ layouts/default/60_abnt2/info.json | 76 ++++++++++++++++++++++ layouts/default/60_abnt2/layout.json | 5 ++ layouts/default/60_abnt2/readme.md | 3 + 5 files changed, 107 insertions(+), 1 deletion(-) create mode 100644 layouts/default/60_abnt2/default_60_abnt2/keymap.c create mode 100644 layouts/default/60_abnt2/info.json create mode 100644 layouts/default/60_abnt2/layout.json create mode 100644 layouts/default/60_abnt2/readme.md (limited to 'keyboards/dz60') diff --git a/keyboards/dz60/rules.mk b/keyboards/dz60/rules.mk index d2faa99897..556d9e55c7 100644 --- a/keyboards/dz60/rules.mk +++ b/keyboards/dz60/rules.mk @@ -25,4 +25,4 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no RGBLIGHT_ENABLE = yes -LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso +LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso 60_abnt2 diff --git a/layouts/default/60_abnt2/default_60_abnt2/keymap.c b/layouts/default/60_abnt2/default_60_abnt2/keymap.c new file mode 100644 index 0000000000..c66cba7bee --- /dev/null +++ b/layouts/default/60_abnt2/default_60_abnt2/keymap.c @@ -0,0 +1,22 @@ +#include QMK_KEYBOARD_H +#include "keymap_br_abnt2.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_abnt2( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, BR_ACUT, BR_LBRC, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, BR_CCDL, BR_TILD, BR_RBRC, KC_ENT, + KC_LSFT, BR_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, BR_SCLN, BR_SLSH, KC_RSFT, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(1), KC_RCTL + ), + + [1] = LAYOUT_60_abnt2( + BR_QUOT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, _______, _______, _______, RESET, _______, KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ) + +}; diff --git a/layouts/default/60_abnt2/info.json b/layouts/default/60_abnt2/info.json new file mode 100644 index 0000000000..e7472bd789 --- /dev/null +++ b/layouts/default/60_abnt2/info.json @@ -0,0 +1,76 @@ +{ + "keyboard_name": "", + "url": "", + "maintainer": "qmk", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT_60_abnt2": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1", "x":1, "y":0}, + {"label":"2", "x":2, "y":0}, + {"label":"3", "x":3, "y":0}, + {"label":"4", "x":4, "y":0}, + {"label":"5", "x":5, "y":0}, + {"label":"6", "x":6, "y":0}, + {"label":"7", "x":7, "y":0}, + {"label":"8", "x":8, "y":0}, + {"label":"9", "x":9, "y":0}, + {"label":"0", "x":10, "y":0}, + {"label":"-", "x":11, "y":0}, + {"label":"=", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"´", "x":11.5, "y":1}, + {"label":"[", "x":12.5, "y":1}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":"Ç", "x":10.75, "y":2}, + {"label":"˜", "x":11.75, "y":2}, + {"label":"]", "x":12.75, "y":2}, + {"label":"Enter", "x":13.5, "y":1, "w":1.5}, + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",", "x":9.25, "y":3}, + {"label":".", "x":10.25, "y":3}, + {"label":";", "x":11.25, "y":3}, + {"label":"/", "x":12.25, "y":3}, + {"label":"Shift", "x":13.25, "y":3, "w":1.75}, + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"GUI", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"AltGr", "x":10, "y":4, "w":1.25}, + {"label":"GUI", "x":11.25, "y":4, "w":1.25}, + {"label":"MO(1)", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} + ] + } + } +} diff --git a/layouts/default/60_abnt2/layout.json b/layouts/default/60_abnt2/layout.json new file mode 100644 index 0000000000..c550379d85 --- /dev/null +++ b/layouts/default/60_abnt2/layout.json @@ -0,0 +1,5 @@ +[{a:7,f:5},"","","","","","","","","","","","","",{w:2},""], +[{w:1.5},"","","","","","","","","","","","","",{w:1.5,w2:1.25,h2:2,x2:0.25},""], +[{w:1.75},"","","","","","","","","","","","",""], +[{w:1.25},"","","","","","","","","","","","","",{w:1.75},""], +[{w:1.25},"",{w:1.25},"",{w:1.25},"",{w:6.25},"",{w:1.25},"",{w:1.25},"",{w:1.25},"",{w:1.25},""] diff --git a/layouts/default/60_abnt2/readme.md b/layouts/default/60_abnt2/readme.md new file mode 100644 index 0000000000..d363e0d5cb --- /dev/null +++ b/layouts/default/60_abnt2/readme.md @@ -0,0 +1,3 @@ +# 60_abnt2 + +![60% ABNT2 layout](https://raw.githubusercontent.com/noroadsleft/qmk_images/master/layouts/default/60_abnt2/keyboard-layout.png) -- cgit v1.2.3