From b2fdb072e590ea06237dc5407ae1902fc15ce405 Mon Sep 17 00:00:00 2001 From: Uthol <83434905+Uthol@users.noreply.github.com> Date: Mon, 7 Mar 2022 20:01:47 -0700 Subject: [Keyboard] Uthol (#16393) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/handwired/uthol/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/handwired/uthol/readme.md (limited to 'keyboards/handwired/uthol/readme.md') diff --git a/keyboards/handwired/uthol/readme.md b/keyboards/handwired/uthol/readme.md new file mode 100644 index 0000000000..c4eb3e51ca --- /dev/null +++ b/keyboards/handwired/uthol/readme.md @@ -0,0 +1,27 @@ +# Uthol + +![Uthol](https://i.imgur.com/weFwdhfh.jpeg) + +A handwired 50% (12x5) ortholinear keyboard made by Uthol + +* Keyboard Maintainer: [Uthol](https://github.com/Uthol) +* Hardware Supported: Pro Micro ATMega32u4, Blackpill STM32F4x1 +* Hardware Availability: [Pro Micro](https://www.sparkfun.com/products/12640), [Blackpill STM32F4x1 ](https://www.aliexpress.com/item/1005001456186625.html) + +Make example for this keyboard (after setting up your build environment): + + make handwired/uthol/rev2:default + +Flashing example for this keyboard: + + make handwired/uthol/rev2:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard +* **Physical reset button**: On the Pro Micro, short the `GND` and `RST` pins. On the Blackpill, press `BOOT0` key and the `RST` key, then release the `RST` key, and release the `BOOT0` key +* **Keycode in layout**: Press the key mapped to `Settings + Backspace` -- cgit v1.2.3