From 44441de8cad7255fd0637459ed39b89e34751b78 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 7 Aug 2016 17:04:39 +0300 Subject: Split keyboard makefiles into rules and Makefile --- keyboards/hhkb/Makefile | 91 ++----------------------------------------------- keyboards/hhkb/rules.mk | 84 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+), 89 deletions(-) create mode 100644 keyboards/hhkb/rules.mk (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/Makefile b/keyboards/hhkb/Makefile index 6fe973e1eb..4e2a6f00fd 100644 --- a/keyboards/hhkb/Makefile +++ b/keyboards/hhkb/Makefile @@ -1,90 +1,3 @@ - - -# project specific files -SRC = matrix.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -#OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# as per original hasu settings -OPT_DEFS += -DBOOTLOADER_SIZE=512 - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID - - - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif - -ifneq (, $(findstring yes, $(HHKB_JP))) - OPT_DEFS += -DHHKB_JP -endif - -debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION -debug-on: all - -debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT -debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) -debug-off: all +endif \ No newline at end of file diff --git a/keyboards/hhkb/rules.mk b/keyboards/hhkb/rules.mk new file mode 100644 index 0000000000..b43b5e23f1 --- /dev/null +++ b/keyboards/hhkb/rules.mk @@ -0,0 +1,84 @@ + + +# project specific files +SRC = matrix.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +#OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# as per original hasu settings +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + +ifneq (, $(findstring yes, $(HHKB_JP))) + OPT_DEFS += -DHHKB_JP +endif + +debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION +debug-on: all + +debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT +debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) +debug-off: all -- cgit v1.2.3 From da226e61261e0c11e678d2086c00b2a45726083e Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sat, 20 Aug 2016 03:22:16 +0300 Subject: Update keyboard readme files with new makefile instructions --- keyboards/arrow_pad/readme.md | 8 +++++--- keyboards/atomic/readme.md | 7 ++++--- keyboards/atreus/readme.md | 7 ++++--- keyboards/bantam44/readme.md | 7 ++++--- keyboards/clueboard/readme.md | 26 +++++++++++++------------- keyboards/cluecard/readme.md | 6 +++--- keyboards/ergodox/readme.md | 6 +++--- keyboards/gh60/readme.md | 8 +++++--- keyboards/hhkb/readme.md | 8 +++++--- keyboards/kc60/readme.md | 10 ++++++---- keyboards/kinesis/readme.md | 6 +++--- keyboards/planck/readme.md | 8 +++++--- keyboards/preonic/readme.md | 8 +++++--- keyboards/retro_refit/readme.md | 8 +++++--- keyboards/s60-x/readme.md | 4 ++-- keyboards/tv44/readme.md | 6 +++--- 16 files changed, 75 insertions(+), 58 deletions(-) (limited to 'keyboards/hhkb') diff --git a/keyboards/arrow_pad/readme.md b/keyboards/arrow_pad/readme.md index 5aa44cce54..2e9a64f2ef 100644 --- a/keyboards/arrow_pad/readme.md +++ b/keyboards/arrow_pad/readme.md @@ -12,13 +12,15 @@ Download or clone the whole firmware and navigate to the keyboards/arrow_pad fol Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboards/atomic/readme.md b/keyboards/atomic/readme.md index ab1e7ba1ff..674dcf113b 100644 --- a/keyboards/atomic/readme.md +++ b/keyboards/atomic/readme.md @@ -13,13 +13,14 @@ Download or clone the whole firmware and navigate to the keyboards/atomic folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md index 734f58f0f0..a4077668e3 100644 --- a/keyboards/atreus/readme.md +++ b/keyboards/atreus/readme.md @@ -174,13 +174,14 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/bantam44/readme.md b/keyboards/bantam44/readme.md index 89d7f9d053..462f67c124 100644 --- a/keyboards/bantam44/readme.md +++ b/keyboards/bantam44/readme.md @@ -12,13 +12,14 @@ Download or clone the whole firmware and navigate to the keyboards/Bantam44 fold Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard/readme.md index 6c29c09eca..4a76e2908c 100644 --- a/keyboards/clueboard/readme.md +++ b/keyboards/clueboard/readme.md @@ -31,36 +31,36 @@ If you would like to use one of the alternative keymaps, or create your own, see ## Clueboard 1.0 -If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `SUBPROJECT=rev1` to your make command, like this: +If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `rev1` to your make command, like this: ``` -$ make SUBPROJECT=rev1 +$ make rev1 ``` And when flashing your keyboard: ``` -$ make SUBPROJECT=rev1 dfu +$ make rev1-dfu ``` -If you are flashing an alternative layout to your rev1, include both `SUBPROJECT=rev1` and `KEYMAP=` in your command, for example when flashing max: +If you are flashing an alternative layout to your rev1, include both `rev1` and `` in your command, for example when flashing max: ``` -$ make SUBPROJECT=rev1 KEYMAP=max dfu +$ make rev1-max-dfu ``` ## Alternate Keymaps -There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `KEYMAP=` to your command: +There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `` to your command: ``` -$ make KEYMAP=skully +$ make skully ``` -And when flashing your keyboard, put `KEYMAP=` between "make" and "dfu": +And when flashing your keyboard, put `` between "make" and "dfu": ``` -$ make KEYMAP=skully dfu +$ make skully-dfu ``` ### Notable Layouts @@ -76,15 +76,15 @@ These layouts are notable for one reason or another. If you are looking for idea There are a lot of possibilities when creating your own keymap, and the primary documentation for doing that is [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. As a way to get started, here is the procedure I recommend: * Copy `[keymaps/default](keymaps/default/)` to `keymaps/`. -* Compile the firmware (`$ make KEYMAP=`) -* Flash the firmware (`$ make KEYMAP= dfu`) +* Compile the firmware (`$ make `) +* Flash the firmware (`$ make -dfu`) * Make sure everything works like the default keyboard * Modify `keymaps//readme.md` to tell others about your layout. * Modify `keymaps//keymap.c` to reflect your desired layout. -* Compile your new custom firmware (`$ make KEYMAP=`) +* Compile your new custom firmware (`$ make `) ** If you have warnings you may flash without fixing them, but something may not work right. ** If you have any errors you must fix them before continuing. -* Flash the firmware (`$ make KEYMAP= dfu`) +* Flash the firmware (`$ make -dfu`) ## Share Your Keymap diff --git a/keyboards/cluecard/readme.md b/keyboards/cluecard/readme.md index ae1afbbfdd..be13fc0171 100644 --- a/keyboards/cluecard/readme.md +++ b/keyboards/cluecard/readme.md @@ -13,16 +13,16 @@ Depending on which keymap you would like to use, you will have to compile slight ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` -$ make keymap=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index f81d7cd8df..a96e415def 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -19,10 +19,10 @@ If you are just compiling an existing keymap and don't want to create your own, 3. Set up a build environment as per the readme. 4. Copy `keyboards/ergodox/keymaps/default/keymap.c` into `keymaps/your_name/keymap.c` (for example, `keymaps/german/keymap.c`) 5. Edit this file, changing keycodes to your liking (see "Finding the keycodes you need" below). Try to edit the comments as well, so the "text graphics" represent your layout correctly. See below for more tips on sharing your work. -6. Compile your firmware by running `make keymap=keymap_name`. For example, `make keymap=german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `subproject=infinity` to the make command. -7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make teensy keymap=keymap_name`. +6. Compile your firmware by running `make keymap_name`. For example, `make german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `infinity` to the make command like this `make infinity-german`. +7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make keymap_name-teensy`. - **Infinity ErgoDox** - Flash the firmware by running `make dfu-util keymap=keymap_name subproject=infinity` + **Infinity ErgoDox** - Flash the firmware by running `make infinity-keymap_name-dfu-util` 8. Submit your work as a pull request to this repository, so others can also use it. :) See below on specifics. Good luck! :) diff --git a/keyboards/gh60/readme.md b/keyboards/gh60/readme.md index 92302d507c..20afb0db07 100644 --- a/keyboards/gh60/readme.md +++ b/keyboards/gh60/readme.md @@ -48,13 +48,15 @@ Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c fo Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/hhkb/readme.md b/keyboards/hhkb/readme.md index 39d49b32a1..367c0a08f7 100644 --- a/keyboards/hhkb/readme.md +++ b/keyboards/hhkb/readme.md @@ -168,13 +168,15 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/kc60/readme.md b/keyboards/kc60/readme.md index acc0df68dc..0639512dd3 100644 --- a/keyboards/kc60/readme.md +++ b/keyboards/kc60/readme.md @@ -10,18 +10,20 @@ Download or clone the whole firmware and navigate to the keyboards/kc60 folder. Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. ## WS2812 Support ![Image of KC60 with RGB Underglow](keymaps/ws2812/ws2812_example.jpg) -Build with WS2812 Support by running `make KEYMAP=ws2812`. +Build with WS2812 Support by running `make ws2812`. diff --git a/keyboards/kinesis/readme.md b/keyboards/kinesis/readme.md index a990f9cb99..79c86581e6 100644 --- a/keyboards/kinesis/readme.md +++ b/keyboards/kinesis/readme.md @@ -27,16 +27,16 @@ Depending on which keymap you would like to use, you will have to compile slight ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` -$ make keymap=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/planck/readme.md b/keyboards/planck/readme.md index f89fdeb931..4b24a690e0 100644 --- a/keyboards/planck/readme.md +++ b/keyboards/planck/readme.md @@ -13,15 +13,17 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. ### Notable forks (which some of the keymap files are from) diff --git a/keyboards/preonic/readme.md b/keyboards/preonic/readme.md index f0be255a09..10763ee97a 100644 --- a/keyboards/preonic/readme.md +++ b/keyboards/preonic/readme.md @@ -13,13 +13,15 @@ Download or clone the whole firmware and navigate to the keyboards/preonic folde Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap, create a file in the keymaps folder named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/retro_refit/readme.md b/keyboards/retro_refit/readme.md index b01a1a9ca9..77df861cef 100644 --- a/keyboards/retro_refit/readme.md +++ b/keyboards/retro_refit/readme.md @@ -12,13 +12,15 @@ Download or clone the whole firmware and navigate to the keyboards/retro_refit f Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + ``` -$ make KEYMAP=[default|jack|] +$ make [default|jack|] ``` + Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md index 099d586991..94ce829223 100644 --- a/keyboards/s60-x/readme.md +++ b/keyboards/s60-x/readme.md @@ -42,9 +42,9 @@ The recommended programs for flashing your keyboard are [Atmel FLIP](http://www. ## Building the firmware -To build firmware binary hex file with a certain keymap just run `make` with the `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - $ make keymap=[custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|] + $ make [custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|] For a more detailed explanation of the build process and the environment setup, see the ["Getting Started" section](/readme.md#getting-started). diff --git a/keyboards/tv44/readme.md b/keyboards/tv44/readme.md index e3b557fe2d..4f691a4ca0 100644 --- a/keyboards/tv44/readme.md +++ b/keyboards/tv44/readme.md @@ -13,16 +13,16 @@ Depending on which keymap you would like to use, you will have to compile slight ### Default -To build with the default keymap, simply run `make`. +To build with the default keymap, simply run `make default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` -$ make keymap=[default|jack|] +$ make [default|jack|] ``` Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` \ No newline at end of file -- cgit v1.2.3 From 70b4fc808db716ab2b6c659a1e43702c435bfbef Mon Sep 17 00:00:00 2001 From: shela Date: Sun, 11 Sep 2016 02:29:32 +0900 Subject: fix variable value of rules.mk --- keyboards/hhkb/rules.mk | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/rules.mk b/keyboards/hhkb/rules.mk index b43b5e23f1..e6fc7260ee 100644 --- a/keyboards/hhkb/rules.mk +++ b/keyboards/hhkb/rules.mk @@ -58,19 +58,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -# MIDI_ENABLE ?= YES # MIDI controls -# UNICODE_ENABLE ?= YES # Unicode -# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +# MIDI_ENABLE ?= yes # MIDI controls +# UNICODE_ENABLE ?= yes # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID ifneq (, $(findstring yes, $(HHKB_JP))) OPT_DEFS += -DHHKB_JP -- cgit v1.2.3 From 2a8536f00fb7e3a547fb5b626279e2e391e556d5 Mon Sep 17 00:00:00 2001 From: shela Date: Sun, 11 Sep 2016 02:46:06 +0900 Subject: Variables in Makefile are ignored in rules.mk --- keyboards/hhkb/keymaps/jp/Makefile | 2 +- keyboards/hhkb/keymaps/rdg_jp/Makefile | 2 +- keyboards/hhkb/rules.mk | 4 ---- 3 files changed, 2 insertions(+), 6 deletions(-) (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/keymaps/jp/Makefile b/keyboards/hhkb/keymaps/jp/Makefile index 92986292a2..a7f700f019 100644 --- a/keyboards/hhkb/keymaps/jp/Makefile +++ b/keyboards/hhkb/keymaps/jp/Makefile @@ -1 +1 @@ -HHKB_JP=yes +OPT_DEFS += -DHHKB_JP diff --git a/keyboards/hhkb/keymaps/rdg_jp/Makefile b/keyboards/hhkb/keymaps/rdg_jp/Makefile index 92986292a2..a7f700f019 100644 --- a/keyboards/hhkb/keymaps/rdg_jp/Makefile +++ b/keyboards/hhkb/keymaps/rdg_jp/Makefile @@ -1 +1 @@ -HHKB_JP=yes +OPT_DEFS += -DHHKB_JP diff --git a/keyboards/hhkb/rules.mk b/keyboards/hhkb/rules.mk index e6fc7260ee..a46271f023 100644 --- a/keyboards/hhkb/rules.mk +++ b/keyboards/hhkb/rules.mk @@ -72,10 +72,6 @@ CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB # UNICODE_ENABLE ?= yes # Unicode # BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID -ifneq (, $(findstring yes, $(HHKB_JP))) - OPT_DEFS += -DHHKB_JP -endif - debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION debug-on: all -- cgit v1.2.3 From f0441f08b87986f49479f1503b11a3d3f899d58e Mon Sep 17 00:00:00 2001 From: dbroqua Date: Sun, 25 Sep 2016 16:32:06 +0200 Subject: - Added dbroqua layout for HHKB keyboard --- keyboards/hhkb/keymaps/dbroqua/keymap.c | 70 ++++++++++++++++++++++++++++++++ keyboards/hhkb/keymaps/dbroqua/readme.md | 9 ++++ 2 files changed, 79 insertions(+) create mode 100644 keyboards/hhkb/keymaps/dbroqua/keymap.c create mode 100644 keyboards/hhkb/keymaps/dbroqua/readme.md (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/keymaps/dbroqua/keymap.c b/keyboards/hhkb/keymaps/dbroqua/keymap.c new file mode 100644 index 0000000000..ef43aae281 --- /dev/null +++ b/keyboards/hhkb/keymaps/dbroqua/keymap.c @@ -0,0 +1,70 @@ +/* + * dbroqua HHKB Layout + */ +#include "hhkb.h" + +#define BASE 0 +#define FN 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* BASE Level: Default Layer + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | Left |Right| + * +-----------------------------------------------------------------------------------------+ + * | Gui | Alt | Space | AltGr | fn | + * `----------------------------------------------------------------´ + */ + [BASE] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LEFT, KC_RGHT, \ + KC_LGUI, KC_LALT, /* */ KC_SPC, KC_RALT, MO(FN) + ), + + /* BASE Level: Default Layer + * ,-----------------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F0 | F11 | F12 | Ins | Del| + * |-----------------------------------------------------------------------------------------+ + * | Caps | | | | | | | | | | | Up | | | + * |-----------------------------------------------------------------------------------------+ + * | | Vol-| Vol+| Mute| | | |PrtSc| Home| PgUp| Left |Right| | + * |-----------------------------------------------------------------------------------------+ + * | | Prev| Play| Next| | | | | End |PgDwn| Down| Up | Down| + * +-----------------------------------------------------------------------------------------+ + * | | | | | | + * `----------------------------------------------------------------´ + */ + [FN] = KEYMAP( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, \ + KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_UP, KC_DOWN, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/hhkb/keymaps/dbroqua/readme.md b/keyboards/hhkb/keymaps/dbroqua/readme.md new file mode 100644 index 0000000000..0afebc84c8 --- /dev/null +++ b/keyboards/hhkb/keymaps/dbroqua/readme.md @@ -0,0 +1,9 @@ +# Dbroqua Layout + +* Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/78eaf35e80bb714eea80cb4049dedb01 + +# Programming Instructions: +Enter into programming mode and run the following command. +``` +$ sudo KEYMAP=dbroqua make dfu +``` \ No newline at end of file -- cgit v1.2.3 From 8747c0786e7b583529d4033ea90aa91e49ae3a51 Mon Sep 17 00:00:00 2001 From: dbroqua Date: Sat, 1 Oct 2016 18:28:33 +0200 Subject: - Updated dbroqua layout for HHKB keyboard --- keyboards/hhkb/keymaps/dbroqua/keymap.c | 48 ++++++++++++++++++++++++--------- 1 file changed, 35 insertions(+), 13 deletions(-) (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/keymaps/dbroqua/keymap.c b/keyboards/hhkb/keymaps/dbroqua/keymap.c index ef43aae281..869e16d496 100644 --- a/keyboards/hhkb/keymaps/dbroqua/keymap.c +++ b/keyboards/hhkb/keymaps/dbroqua/keymap.c @@ -5,6 +5,7 @@ #define BASE 0 #define FN 1 +#define MOUSE 2 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* BASE Level: Default Layer @@ -15,37 +16,58 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-----------------------------------------------------------------------------------------+ * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | * |-----------------------------------------------------------------------------------------+ - * | Shift | Z | X | C | V | B | N | M | , | . | / | Left |Right| + * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | fn | * +-----------------------------------------------------------------------------------------+ - * | Gui | Alt | Space | AltGr | fn | + * | Gui | Alt | Space | AltGr | Menu| * `----------------------------------------------------------------´ */ [BASE] = KEYMAP( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LEFT, KC_RGHT, \ - KC_LGUI, KC_LALT, /* */ KC_SPC, KC_RALT, MO(FN) + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(FN), \ + KC_LGUI, KC_LALT, /* */ KC_SPC, KC_RALT, MO(MOUSE) ), - /* BASE Level: Default Layer + /* FN Layer * ,-----------------------------------------------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F0 | F11 | F12 | Ins | Del| + * | Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F0 | F11 | F12 | Ins | Del| * |-----------------------------------------------------------------------------------------+ - * | Caps | | | | | | | | | | | Up | | | + * | Caps | | | | | | | |PrtSc| Slck| Paus| Up | | | * |-----------------------------------------------------------------------------------------+ - * | | Vol-| Vol+| Mute| | | |PrtSc| Home| PgUp| Left |Right| | + * | | Vol-| Vol+| Mute| | | | | Home| PgUp| Left |Right| | * |-----------------------------------------------------------------------------------------+ - * | | Prev| Play| Next| | | | | End |PgDwn| Down| Up | Down| + * | | Prev| Play| Next| | | | | End |PgDwn| Down| | | * +-----------------------------------------------------------------------------------------+ * | | | | | | * `----------------------------------------------------------------´ */ [FN] = KEYMAP( - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ - KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, \ - KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_UP, KC_DOWN, \ + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, \ + KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + /* MOUSE Layer + * ,-----------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | WUp | | | | | | | | Btn1| Up | Btn2| | + * |-----------------------------------------------------------------------------------------+ + * | | WLt | WDn | WRt | | | | | | | Left |Right| | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | Btn3| Down| | | + * +-----------------------------------------------------------------------------------------+ + * | | | | | | + * `----------------------------------------------------------------´ + */ + [MOUSE] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_WH_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, \ + KC_TRNS, KC_WH_L, KC_WH_D, KC_WH_R, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_R, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN3, KC_MS_D, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; -- cgit v1.2.3 From 6a090c5df7e52df084de975f070841af1138b5a4 Mon Sep 17 00:00:00 2001 From: dbroqua Date: Sat, 1 Oct 2016 19:04:11 +0200 Subject: - Fixed key name in default layer definition --- keyboards/hhkb/keymaps/dbroqua/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/keymaps/dbroqua/keymap.c b/keyboards/hhkb/keymaps/dbroqua/keymap.c index 869e16d496..4e907acd87 100644 --- a/keyboards/hhkb/keymaps/dbroqua/keymap.c +++ b/keyboards/hhkb/keymaps/dbroqua/keymap.c @@ -18,7 +18,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-----------------------------------------------------------------------------------------+ * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | fn | * +-----------------------------------------------------------------------------------------+ - * | Gui | Alt | Space | AltGr | Menu| + * | Gui | Alt | Space | AltGr |Mouse| * `----------------------------------------------------------------´ */ [BASE] = KEYMAP( -- cgit v1.2.3 From 0320fbf6f4c3c6d079226bc49c7b4d3a3906f5d7 Mon Sep 17 00:00:00 2001 From: dbroqua Date: Mon, 3 Oct 2016 23:30:31 +0200 Subject: - Updated dbroqua layout for HHKB keyboard (added some missing fn keys) --- keyboards/hhkb/keymaps/dbroqua/keymap.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/keymaps/dbroqua/keymap.c b/keyboards/hhkb/keymaps/dbroqua/keymap.c index 4e907acd87..2b6d3901a4 100644 --- a/keyboards/hhkb/keymaps/dbroqua/keymap.c +++ b/keyboards/hhkb/keymaps/dbroqua/keymap.c @@ -35,19 +35,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-----------------------------------------------------------------------------------------+ * | Caps | | | | | | | |PrtSc| Slck| Paus| Up | | | * |-----------------------------------------------------------------------------------------+ - * | | Vol-| Vol+| Mute| | | | | Home| PgUp| Left |Right| | + * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left |Right| | * |-----------------------------------------------------------------------------------------+ - * | | Prev| Play| Next| | | | | End |PgDwn| Down| | | + * | | Prev| Play| Next| | | + | - | End |PgDwn| Down| | | * +-----------------------------------------------------------------------------------------+ - * | | | | | | + * | | | | Stop | | * `----------------------------------------------------------------´ */ [FN] = KEYMAP( KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, \ - KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, \ + KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_MSTP, KC_TRNS ), /* MOUSE Layer -- cgit v1.2.3 From a8b1c47f0f6e63dc1260159b7b8b2172a3b57ff4 Mon Sep 17 00:00:00 2001 From: Sihui Huang Date: Sun, 20 Nov 2016 11:10:26 -0800 Subject: add sh-hhkb-jp layers --- keyboards/hhkb/keymaps/sh_jp/Makefile | 1 + keyboards/hhkb/keymaps/sh_jp/README.md | 84 ++++++++++++++++++++++++++++++++++ keyboards/hhkb/keymaps/sh_jp/keymap.c | 60 ++++++++++++++++++++++++ 3 files changed, 145 insertions(+) create mode 100644 keyboards/hhkb/keymaps/sh_jp/Makefile create mode 100644 keyboards/hhkb/keymaps/sh_jp/README.md create mode 100644 keyboards/hhkb/keymaps/sh_jp/keymap.c (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/keymaps/sh_jp/Makefile b/keyboards/hhkb/keymaps/sh_jp/Makefile new file mode 100644 index 0000000000..a7f700f019 --- /dev/null +++ b/keyboards/hhkb/keymaps/sh_jp/Makefile @@ -0,0 +1 @@ +OPT_DEFS += -DHHKB_JP diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/keymaps/sh_jp/README.md new file mode 100644 index 0000000000..7be38a415f --- /dev/null +++ b/keyboards/hhkb/keymaps/sh_jp/README.md @@ -0,0 +1,84 @@ +Keymaps for both Dvorak layout and QWER layout for HHKB JP. +1. The default layout is Dvorak. +2. Use `Tog` to toggle between Dvorak and QWER +3. Holding `NewCmd`, the original `LftCmd`, will activate the `NewCmd` layer which means `NewCmd+key` is the same as `Cmd+key` in normal QWER layout.[1](#cmdTab) + - For example, no matter you are in Dvorak layout or QWER layout, you can use `Cmd+s` to save a currently editing file. +4. `Symb` makes type symbols easier: for example: `Symb+a` is `!`. +5. `Spc+key` equals to `Shft+key` while using `Spc` alone will yield a space as usual. +6. There's an extra `Tab` in the last line. + +``` +Layer QWER: +,-----------------------------------------------------------. +|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| |Bsp| +|-----------------------------------------------------------| +|Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| | +|------------------------------------------------------` Ent| +|Ctrl | A| O| E| U| I| D| H| T| N| S| -| \| | +|-----------------------------------------------------------| +|Shft | ;| Q| J| K| X| B| M| W| V| Z| | Up| | +|-----------------------------------------------------------| +|FN| `| Alt|NewCmd|Symb| Spc |Symb|Tab|RCmd|Tog|Lft|Dwn|Rgh| +`-----------------------------------------------------------' +``` + +``` +Layer QWER: +,-----------------------------------------------------------. +|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =| |Bsp| +|-----------------------------------------------------------| +|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | +|------------------------------------------------------` Ent| +|Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | +|-----------------------------------------------------------| +|Shft | Z| X| C| V| B| N| M| ,| .| /| | Up| | +|-----------------------------------------------------------| +|FN| `| Alt|NewCmd|Symb| Spc |Symb|Tab|Cmd|Tog|Lft|Dwn|Rgh| +`-----------------------------------------------------------' +``` + +``` +Layer Symb: +,-----------------------------------------------------------. +| | | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | [| ]| | | {| }| | | | | | +|------------------------------------------------------` | +| | !| @| #| $| %| ^| &| *| (| )| '| \| | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | +`-----------------------------------------------------------' +``` + +``` +Layer FUNC: HHKB mode (HHKB Fn) +,-----------------------------------------------------------. +|Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| +|-----------------------------------------------------------| +|Caps | | | | | | | |Psc|Slk|Pus|Up | | | +|------------------------------------------------------` | +| |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | | +|-----------------------------------------------------------| +| | | | | | | +| -|End|PgD|Dow| | | | +|-----------------------------------------------------------| +| || | | | | | | | | || | | | +`-----------------------------------------------------------' +``` + +``` +Empty Layer: +,-----------------------------------------------------------. +| | | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | | +|------------------------------------------------------` | +| | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | +`-----------------------------------------------------------' +``` +1: `NewCmd + Tab` does not work, you can use `RCmd+Tab` to switch among applications. diff --git a/keyboards/hhkb/keymaps/sh_jp/keymap.c b/keyboards/hhkb/keymaps/sh_jp/keymap.c new file mode 100644 index 0000000000..16181acd3e --- /dev/null +++ b/keyboards/hhkb/keymaps/sh_jp/keymap.c @@ -0,0 +1,60 @@ +#include "hhkb.h" + +#define _______ KC_TRNS + +enum { + DVOR, + QWER, + NEW_CMD, + SYMB, + FUNC +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [DVOR] = KEYMAP_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_JYEN, KC_BSPC, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_BSLS, KC_ENT, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RO, KC_UP, KC_RSFT, + MO(FUNC), KC_ZKHK, KC_LALT, MO(NEW_CMD), MO(SYMB), MT(MOD_LSFT, KC_SPC), MO(SYMB), KC_TAB, KC_RGUI, TG(QWER), KC_LEFT, KC_DOWN, KC_RGHT + ), + [QWER] = KEYMAP_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_UP, KC_RSFT, + MO(FUNC), KC_ZKHK, KC_LALT, MO(NEW_CMD), MO(SYMB), MT(MOD_LSFT, KC_SPC), MO(SYMB), KC_TAB, KC_RGUI, _______, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [NEW_CMD] = KEYMAP_JP( + _______, LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), LGUI(KC_6), LGUI(KC_7), LGUI(KC_8), LGUI(KC_9), LGUI(KC_0), _______, _______, _______, _______, + _______, LGUI(KC_Q), LGUI(KC_W), LGUI(KC_E), LGUI(KC_R), LGUI(KC_T), LGUI(KC_Y), LGUI(KC_U), LGUI(KC_I), LGUI(KC_O), LGUI(KC_P), LGUI(KC_LBRC), LGUI(KC_RBRC), + _______, LGUI(KC_A), LGUI(KC_S), LGUI(KC_D), LGUI(KC_F), LGUI(KC_G), LGUI(KC_H), LGUI(KC_J), LGUI(KC_K), LGUI(KC_L), _______, _______, _______, _______, + LGUI(KC_LSFT), LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), LGUI(KC_B), LGUI(KC_N), LGUI(KC_M), LGUI(KC_COMM), LGUI(KC_DOT), LGUI(KC_SLSH), _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RGHT) + ), + + [SYMB] = KEYMAP_JP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, LSFT(KC_LBRC), LSFT(KC_RBRC), _______, _______,_______, _______, + _______, LSFT(KC_1),LSFT(KC_2),LSFT(KC_3),LSFT(KC_4), LSFT(KC_5), LSFT(KC_6), LSFT(KC_7), LSFT(KC_8), LSFT(KC_9), LSFT(KC_0), _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [FUNC] = KEYMAP_JP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, + _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, + _______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { + return MACRO_NONE; +} + +const uint16_t PROGMEM fn_actions[] = { + +}; -- cgit v1.2.3 From 11f17e3b233dbbf7c39e5e0042cc5fdff3acba55 Mon Sep 17 00:00:00 2001 From: Sihui Huang Date: Sun, 20 Nov 2016 11:12:48 -0800 Subject: Update README.md --- keyboards/hhkb/keymaps/sh_jp/README.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/keymaps/sh_jp/README.md index 7be38a415f..6c6ab1bc65 100644 --- a/keyboards/hhkb/keymaps/sh_jp/README.md +++ b/keyboards/hhkb/keymaps/sh_jp/README.md @@ -1,4 +1,5 @@ -Keymaps for both Dvorak layout and QWER layout for HHKB JP. +###Keymaps with both Dvorak layout and QWER layout for HHKB JP. + 1. The default layout is Dvorak. 2. Use `Tog` to toggle between Dvorak and QWER 3. Holding `NewCmd`, the original `LftCmd`, will activate the `NewCmd` layer which means `NewCmd+key` is the same as `Cmd+key` in normal QWER layout.[1](#cmdTab) -- cgit v1.2.3 From 34aa59c6d514cb30ca3582200cadd1da4786c50c Mon Sep 17 00:00:00 2001 From: Sihui Huang Date: Sun, 20 Nov 2016 11:13:57 -0800 Subject: Update README.md --- keyboards/hhkb/keymaps/sh_jp/README.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/keymaps/sh_jp/README.md index 6c6ab1bc65..65e781cf30 100644 --- a/keyboards/hhkb/keymaps/sh_jp/README.md +++ b/keyboards/hhkb/keymaps/sh_jp/README.md @@ -4,7 +4,8 @@ 2. Use `Tog` to toggle between Dvorak and QWER 3. Holding `NewCmd`, the original `LftCmd`, will activate the `NewCmd` layer which means `NewCmd+key` is the same as `Cmd+key` in normal QWER layout.[1](#cmdTab) - For example, no matter you are in Dvorak layout or QWER layout, you can use `Cmd+s` to save a currently editing file. -4. `Symb` makes type symbols easier: for example: `Symb+a` is `!`. +4. `Symb` makes type symbols easier + - for example: `Symb+a` is `!`. 5. `Spc+key` equals to `Shft+key` while using `Spc` alone will yield a space as usual. 6. There's an extra `Tab` in the last line. -- cgit v1.2.3 From 23f63ed1b9487271f8156ecf191ab7d82d595e81 Mon Sep 17 00:00:00 2001 From: Sihui Huang Date: Sun, 20 Nov 2016 11:18:08 -0800 Subject: Update README.md --- keyboards/hhkb/keymaps/sh_jp/README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/keymaps/sh_jp/README.md index 65e781cf30..37fa43e66f 100644 --- a/keyboards/hhkb/keymaps/sh_jp/README.md +++ b/keyboards/hhkb/keymaps/sh_jp/README.md @@ -10,7 +10,7 @@ 6. There's an extra `Tab` in the last line. ``` -Layer QWER: +Layer DVOR: ,-----------------------------------------------------------. |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| |Bsp| |-----------------------------------------------------------| -- cgit v1.2.3 From ccc34851f2e12d990a6d51742fc7e85e8011a94d Mon Sep 17 00:00:00 2001 From: Sihui Huang Date: Sun, 20 Nov 2016 13:31:41 -0800 Subject: add space to NewCmd layer --- keyboards/hhkb/keymaps/sh_jp/README.md | 2 +- keyboards/hhkb/keymaps/sh_jp/keymap.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/keymaps/sh_jp/README.md index 65e781cf30..84557a5c07 100644 --- a/keyboards/hhkb/keymaps/sh_jp/README.md +++ b/keyboards/hhkb/keymaps/sh_jp/README.md @@ -8,7 +8,7 @@ - for example: `Symb+a` is `!`. 5. `Spc+key` equals to `Shft+key` while using `Spc` alone will yield a space as usual. 6. There's an extra `Tab` in the last line. - + ``` Layer QWER: ,-----------------------------------------------------------. diff --git a/keyboards/hhkb/keymaps/sh_jp/keymap.c b/keyboards/hhkb/keymaps/sh_jp/keymap.c index 16181acd3e..c2bdd37bc2 100644 --- a/keyboards/hhkb/keymaps/sh_jp/keymap.c +++ b/keyboards/hhkb/keymaps/sh_jp/keymap.c @@ -31,7 +31,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, LGUI(KC_Q), LGUI(KC_W), LGUI(KC_E), LGUI(KC_R), LGUI(KC_T), LGUI(KC_Y), LGUI(KC_U), LGUI(KC_I), LGUI(KC_O), LGUI(KC_P), LGUI(KC_LBRC), LGUI(KC_RBRC), _______, LGUI(KC_A), LGUI(KC_S), LGUI(KC_D), LGUI(KC_F), LGUI(KC_G), LGUI(KC_H), LGUI(KC_J), LGUI(KC_K), LGUI(KC_L), _______, _______, _______, _______, LGUI(KC_LSFT), LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), LGUI(KC_B), LGUI(KC_N), LGUI(KC_M), LGUI(KC_COMM), LGUI(KC_DOT), LGUI(KC_SLSH), _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RGHT) + _______, _______, _______, _______, _______, LGUI(KC_SPC), _______, _______, _______, _______, LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RGHT) ), [SYMB] = KEYMAP_JP( -- cgit v1.2.3 From b75538c0bfca03f7b493b7b7dbaf9dc5e7631e53 Mon Sep 17 00:00:00 2001 From: Sihui Huang Date: Sun, 20 Nov 2016 14:45:51 -0800 Subject: add del to new cmd --- keyboards/hhkb/keymaps/sh_jp/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/hhkb') diff --git a/keyboards/hhkb/keymaps/sh_jp/keymap.c b/keyboards/hhkb/keymaps/sh_jp/keymap.c index c2bdd37bc2..d4cb3b0418 100644 --- a/keyboards/hhkb/keymaps/sh_jp/keymap.c +++ b/keyboards/hhkb/keymaps/sh_jp/keymap.c @@ -27,7 +27,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [NEW_CMD] = KEYMAP_JP( - _______, LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), LGUI(KC_6), LGUI(KC_7), LGUI(KC_8), LGUI(KC_9), LGUI(KC_0), _______, _______, _______, _______, + _______, LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), LGUI(KC_6), LGUI(KC_7), LGUI(KC_8), LGUI(KC_9), LGUI(KC_0), _______, _______, _______, LGUI(KC_BSPC), _______, LGUI(KC_Q), LGUI(KC_W), LGUI(KC_E), LGUI(KC_R), LGUI(KC_T), LGUI(KC_Y), LGUI(KC_U), LGUI(KC_I), LGUI(KC_O), LGUI(KC_P), LGUI(KC_LBRC), LGUI(KC_RBRC), _______, LGUI(KC_A), LGUI(KC_S), LGUI(KC_D), LGUI(KC_F), LGUI(KC_G), LGUI(KC_H), LGUI(KC_J), LGUI(KC_K), LGUI(KC_L), _______, _______, _______, _______, LGUI(KC_LSFT), LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), LGUI(KC_B), LGUI(KC_N), LGUI(KC_M), LGUI(KC_COMM), LGUI(KC_DOT), LGUI(KC_SLSH), _______, _______, _______, -- cgit v1.2.3