From 96546c79c0e931c89e4ac60a154b669925d5d34d Mon Sep 17 00:00:00 2001
From: Jason <jagor@microsoft.com>
Date: Tue, 5 Jun 2018 12:43:20 -0700
Subject: Adding SX60 work by amnobis and configurator settings (#3122)

* Add SX60

* Add config maps and layouts as well as readmes.

* cleanup and fixes

* correct readme

* add missing closing commenty tag

* Changing includes to QMK_KEYBOARD_H

* Update settings.json

Remove config change that was added automatically by vscode.

* Update readme.md

fix readme formatting
---
 keyboards/sx60/rules.mk | 61 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100755 keyboards/sx60/rules.mk

(limited to 'keyboards/sx60/rules.mk')

diff --git a/keyboards/sx60/rules.mk b/keyboards/sx60/rules.mk
new file mode 100755
index 0000000000..0381293ceb
--- /dev/null
+++ b/keyboards/sx60/rules.mk
@@ -0,0 +1,61 @@
+# # project specific files
+SRC =  twimaster.c \
+  matrix.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= no
+CUSTOM_MATRIX ?= yes
-- 
cgit v1.2.3