From 1522d97c2b74577780fe97a52079d0ab68902ed5 Mon Sep 17 00:00:00 2001 From: Jared Hendry Date: Sun, 19 Apr 2020 19:58:58 -0400 Subject: Add support for YMD75 rev 2 (#8853) --- keyboards/ymd75/README.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'keyboards/ymd75/README.md') diff --git a/keyboards/ymd75/README.md b/keyboards/ymd75/README.md index 9a618c5943..7c4779c9f5 100644 --- a/keyboards/ymd75/README.md +++ b/keyboards/ymd75/README.md @@ -1,19 +1,19 @@ # YMD75 / MT84 -75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however the PCB has "MT84" printed on both sides. +75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides. * Keyboard Maintainer: [Wayne K Jones](github.com/WarmCatUK) -* Hardware Supported: YMD75/MT84 with the ATmega32a chip. +* Hardware Supported: YMD75/MT84 (rev1 and rev2) with the ATmega32a chip. * Hardware Availability: Make example for this keyboard (after setting up your build environment): - make ymd75:default + make ymd75/rev1:default Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) - make ymd75:default:flash + make ymd75/rev1:default:flash -**Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard. +**Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding `L_CTRL` while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3