# keyten kt60HS-T V1 60% MX Hot-Swap Tsangan PCB ![kt60HS-T image](https://i.imgur.com/tOej7ND.jpeg) **Note: This firmware only supports the PCB version with STM32F401 controller** * Keyboard Maintainer: [keyten](https://github.com/key10iq) * Hardware Supported: keyten kt60HS-T * Hardware Availability: private GB Make example for this keyboard (after setting up your build environment): make keyten/kt60hs_t/v1:default Flashing example for this keyboard: make keyten/kt60hs_t/v1:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). ## Bootloader Enter the bootloader in 3 ways: * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * Keycode in layout: Press the key mapped to `QK_BOOT` if it is available * Physical reset button: Hold the button on the back of the PCB