commit 23bbac4d6114654b4a577e2c463732fe42f9679f
parent c323fad822b91df7b33d288e4aab7ae8e9099079
Author: Jack Sangdahl <jack@pngu.org>
Date: Fri, 27 Jun 2025 21:24:23 -0600
Some readme fixes and correct part number from SOT-523 -> SOT23
Diffstat:
2 files changed, 7 insertions(+), 19 deletions(-)
diff --git a/production/bom.csv b/production/bom.csv
@@ -12,7 +12,7 @@ D37,D_SOD-123,1,1N4148,C81598
D40,0805,1,LED,C2297
F1,1206,1,500mA,C70070
J1,USB_C_Receptacle_HRO_TYPE-C-31-M-12,1,USB_C_Receptacle_USB2.0_14P,C165948
-Q1,SOT-23,1,DTC123J,C20616358
+Q1,SOT-23,1,DTC123J,C406040
R1,0805,1,20k,C4328
"R11, R2",0805,2,100k,C149504
"R12, R7, R8",0805,3,5.1k,C27834
diff --git a/readme.md b/readme.md
@@ -7,29 +7,16 @@ A pseudo-split keyboard with a trackpad or LCD display and per-key RGB
## Hardware Specifics
-This keyboard uses an integrated STM32G0B1 microcontroller fit with a single push button switch^[1](#references)^, and USB-C. It also features a dedicated IS31FL3733 RGB Matrix driver to alleviate processing power from the primary MCU for LCD drawing, or other tasks.
+This keyboard uses an integrated STM32G0B1 microcontroller fit with a single push button switch<sup>[1](#references)</sup>, and USB-C. It also features a dedicated IS31FL3733 RGB Matrix driver to alleviate processing power from the primary MCU for LCD drawing, or other tasks.
## Ordering
The following instructions will be for [JLCPCB](jlcpcb.com), but should generally apply to most PCB manufacturers. The Gerber files in this repository include:
- [**pcb_gerbers.zip**](production/pcb_gerbers.zip): Main PCB
-- [**plate_gerbers.zip**](production/plate_gerbers.zip): Switch Plate PCB^*^
+- [**plate_gerbers.zip**](production/plate_gerbers.zip): Switch Plate PCB<sup>*</sup>
- [**back_gerbers.zip**](production/back_gerbers.zip): Backplate PCB
* The switch plate PCB is designed for a single half of the keyboard (and is reversible), meaning ordering a quantity of 10 will be enough to cover 5 keyboards.
-3. For PCB assembly, choose **Economic** PCBA type and **Bottom Side** for assembly side
-4. Upload BOM file from [production/bom.csv](production/bom.csv) on the Bill of Materials page
-5. Upload CPL file from [production/positions.csv](production/positions.csv) as well. Disregard any message like "J1 won't be assembled due to missing data". This is the display pin header
-- Choose "File Provided as Complete File, proceed with my own files"
-6. Select appropriate components on the following screen by typing in
-the shown part number and select it. An effort has been made to choose
-as few extended components as possible, however this is not possible
-for some.
-7. Have a quick look at component placement and make sure nothing
-looks wildly wrong. It is normal for some components to be shown
-oriented incorrectly or not quite where they belong. The PCB reviewers
-will generally correct this without issue.
-
1. Upload the appropriate Gerber files described above
2. Set PCB quantity and colour as desired
3. For PCB assembly, choose **Economic** PCBA type and **Bottom Side** for assembly side
@@ -41,11 +28,11 @@ will generally correct this without issue.
For optional components to be installed by hand:
| Item | Quantity | Remarks |
|------|----------|---------|
-| 6028 RGB LEDs ([Alibaba]((https://www.alibaba.com/product-detail/smd-6028-RGB-led-diode-for_60637386884.html))) | 36 | Unforunately, LEDs matching this pinout are rather difficult to find, and are not carried by LCSC. |
+| 6028 RGB LEDs ([Alibaba](https://www.alibaba.com/product-detail/smd-6028-RGB-led-diode-for_60637386884.html)) | 36 | Unforunately, LEDs matching this pinout are rather difficult to find, and are not carried by LCSC. |
| 4mm M2 Screws | 8 | Used for mounting PCB to plate case. Length does not have to be exact. |
| 6mm M2 Standoffs | 4 | Used for mounting PCB to plate case. Ensure maximum diameter is no greater than 4mm. |
-| 240x240 LCD ([ST7789](https://www.adafruit.com/product/3787)) | 1^*^ | Other displays with same pinout and dimensions (no larger than 40x43mm) will work. |
-| Azoteq Trackpad ([TPS43](https://www.mouser.com/ProductDetail/Azoteq/TPS43-201A-B?qs=HXFqYaX1Q2x%252BNkQCZlM0ug%3D%3D)) | 1^*^ | Installed via soldering wires to appropriate display header pins. |
+| 240x240 LCD ([ST7789](https://www.adafruit.com/product/3787)) | 1<sup>*</sup> | Other displays with same pinout and dimensions (no larger than 40x43mm) will work. |
+| Azoteq Trackpad ([TPS43](https://www.mouser.com/ProductDetail/Azoteq/TPS43-201A-B?qs=HXFqYaX1Q2x%252BNkQCZlM0ug%3D%3D)) | 1<sup>*</<sup> | Installed via soldering wires to appropriate display header pins. |
| MX Switches | 36 | Pick your favourite switches! |
* Trackpad and LCD is either/or. Both cannot be installed at the same time.
@@ -62,3 +49,4 @@ These steps assume you already have an assembled PCB and are installing switches
## References
1. [A single-push reset circuit for STM32](https://acheronproject.com/reset_article_1/reset_article_1)
+2. Relevant datasheets
