aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDasky <[email protected]>2024-09-20 06:17:49 +0100
committerGitHub <[email protected]>2024-09-20 15:17:49 +1000
commit90b87abb11df68dea659042bfea437f23dc860d2 (patch)
tree2295f58974e02e1782e5bf075be66cd2e9a958a5
parent9cbb4a2c4c49342e5aff9ea2731fe2328e195eaf (diff)
downloadqmk_firmware-90b87abb11df68dea659042bfea437f23dc860d2.tar.gz
qmk_firmware-90b87abb11df68dea659042bfea437f23dc860d2.zip
Add SteelSeries Prime+ mouse (#24408)
Co-authored-by: Joel Challis <[email protected]>
-rw-r--r--keyboards/steelseries/prime_plus/board.h9
-rw-r--r--keyboards/steelseries/prime_plus/config.h32
-rw-r--r--keyboards/steelseries/prime_plus/graphics/primeplus.qgf.c31
-rw-r--r--keyboards/steelseries/prime_plus/graphics/primeplus.qgf.h9
-rw-r--r--keyboards/steelseries/prime_plus/halconf.h10
-rw-r--r--keyboards/steelseries/prime_plus/keyboard.json59
-rw-r--r--keyboards/steelseries/prime_plus/keymaps/default/keymap.c29
-rw-r--r--keyboards/steelseries/prime_plus/keymaps/default/rules.mk1
-rw-r--r--keyboards/steelseries/prime_plus/mcuconf.h18
-rw-r--r--keyboards/steelseries/prime_plus/prime_plus.c40
-rw-r--r--keyboards/steelseries/prime_plus/readme.md28
-rw-r--r--keyboards/steelseries/prime_plus/rgblight_custom.c45
-rw-r--r--keyboards/steelseries/prime_plus/rules.mk7
13 files changed, 318 insertions, 0 deletions
diff --git a/keyboards/steelseries/prime_plus/board.h b/keyboards/steelseries/prime_plus/board.h
new file mode 100644
index 0000000000..edb9e1072c
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/board.h
@@ -0,0 +1,9 @@
+// Copyright 2024 Dasky (@daskygit)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include_next <board.h>
+
+#undef STM32_HSECLK
+#define STM32_HSECLK 12000000
diff --git a/keyboards/steelseries/prime_plus/config.h b/keyboards/steelseries/prime_plus/config.h
new file mode 100644
index 0000000000..db62111a18
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/config.h
@@ -0,0 +1,32 @@
+// Copyright 2024 Dasky (@daskygit)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define POINTING_DEVICE_CS_PIN A4
+#define POINTING_DEVICE_MOTION_PIN B0
+#define POINTING_DEVICE_TASK_THROTTLE_MS 1
+
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN A5
+#define SPI_MOSI_PIN A7
+#define SPI_MISO_PIN A6
+
+#define I2C1_SCL_PIN B8
+#define I2C1_SDA_PIN B9
+
+#define OLED_RESET B7
+#define OLED_PWR B2
+
+#define RGB_PWM_DRIVER PWMD1
+#define RGB_BLUE_PIN A10
+#define RGB_BLUE_PWM_CHANNEL 3
+#define RGB_GREEN_PIN A8
+#define RGB_GREEN_PWM_CHANNEL 1
+#define RGB_RED_PIN A9
+#define RGB_RED_PWM_CHANNEL 2
+
+#define OPTICAL_SW_PWR A2
+
+#define I2C1_CLOCK_SPEED 400000
+#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
diff --git a/keyboards/steelseries/prime_plus/graphics/primeplus.qgf.c b/keyboards/steelseries/prime_plus/graphics/primeplus.qgf.c
new file mode 100644
index 0000000000..b72f4899fe
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/graphics/primeplus.qgf.c
@@ -0,0 +1,31 @@
+// Copyright 2024 QMK -- generated source code only, image retains original copyright
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <qp.h>
+
+const uint32_t gfx_primeplus_length = 317;
+
+// clang-format off
+const uint8_t gfx_primeplus[317] = {
+ 0x00, 0xFF, 0x12, 0x00, 0x00, 0x51, 0x47, 0x46, 0x01, 0x3D, 0x01, 0x00, 0x00, 0xC2, 0xFE, 0xFF,
+ 0xFF, 0x60, 0x00, 0x18, 0x00, 0x01, 0x00, 0x01, 0xFE, 0x04, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00,
+ 0x02, 0xFD, 0x06, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xE8, 0x03, 0x05, 0xFA, 0x0D, 0x01, 0x00,
+ 0x0C, 0x00, 0x82, 0x80, 0x24, 0x09, 0x09, 0x00, 0x82, 0x80, 0x24, 0x09, 0x09, 0x00, 0xA4, 0x80,
+ 0x24, 0x09, 0x38, 0xA6, 0x7A, 0xE7, 0x1D, 0x4E, 0xC2, 0x7C, 0x09, 0xC0, 0xFF, 0x1F, 0x48, 0xA9,
+ 0x0A, 0x29, 0x24, 0x52, 0x22, 0x55, 0x09, 0xE0, 0xFF, 0x3F, 0x48, 0xA9, 0x0A, 0x29, 0x24, 0x52,
+ 0x22, 0x55, 0x05, 0xFC, 0x02, 0xFF, 0xAF, 0x49, 0xA9, 0x3A, 0xE9, 0x24, 0xCE, 0x23, 0x55, 0x03,
+ 0xE0, 0xDE, 0x3B, 0x38, 0xA9, 0x0A, 0x27, 0x24, 0x12, 0x22, 0x55, 0x05, 0xE0, 0xDE, 0x3B, 0x08,
+ 0xA9, 0x0A, 0x29, 0x24, 0x12, 0xA2, 0x54, 0x09, 0xFC, 0xDE, 0xFB, 0x09, 0x46, 0x79, 0xE9, 0x1D,
+ 0xCE, 0x43, 0x55, 0x09, 0xE0, 0xDE, 0x3B, 0x09, 0x00, 0x82, 0xE0, 0xDE, 0x3B, 0x09, 0x00, 0x85,
+ 0xFC, 0xDC, 0xF9, 0x01, 0x00, 0xF0, 0x03, 0xFF, 0x80, 0x0F, 0x02, 0x00, 0x82, 0xE0, 0xD9, 0x3C,
+ 0x02, 0x00, 0x80, 0xF8, 0x03, 0xFF, 0x80, 0x1F, 0x02, 0x00, 0x82, 0xE0, 0x03, 0x3E, 0x02, 0x00,
+ 0x84, 0x18, 0x63, 0x04, 0xE1, 0x1F, 0x02, 0x00, 0x89, 0xFC, 0xDF, 0xFF, 0x01, 0x00, 0xD8, 0xDA,
+ 0x56, 0xFD, 0x1E, 0x02, 0x00, 0x82, 0xE0, 0xDF, 0x3F, 0x02, 0x00, 0x84, 0xD8, 0xDA, 0x56, 0xFD,
+ 0x1E, 0x02, 0x00, 0x82, 0xE0, 0xDF, 0x3F, 0x02, 0x00, 0x84, 0xD8, 0xDA, 0x56, 0x31, 0x18, 0x02,
+ 0x00, 0x80, 0xFC, 0x02, 0xFF, 0x86, 0x01, 0x00, 0x18, 0xE3, 0x56, 0xFD, 0x1E, 0x02, 0x00, 0x82,
+ 0xE0, 0xFF, 0x3F, 0x02, 0x00, 0x84, 0xD8, 0xDB, 0x56, 0xFD, 0x1E, 0x02, 0x00, 0x82, 0xC0, 0xFF,
+ 0x1F, 0x02, 0x00, 0x84, 0xD8, 0x5B, 0x54, 0xE1, 0x1F, 0x02, 0x00, 0x82, 0x80, 0x24, 0x09, 0x02,
+ 0x00, 0x80, 0xF8, 0x03, 0xFF, 0x80, 0x1F, 0x02, 0x00, 0x82, 0x80, 0x24, 0x09, 0x02, 0x00, 0x80,
+ 0xF0, 0x03, 0xFF, 0x80, 0x0F, 0x02, 0x00, 0x82, 0x80, 0x24, 0x09, 0x09, 0x00,
+};
+// clang-format on
diff --git a/keyboards/steelseries/prime_plus/graphics/primeplus.qgf.h b/keyboards/steelseries/prime_plus/graphics/primeplus.qgf.h
new file mode 100644
index 0000000000..16ff19b205
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/graphics/primeplus.qgf.h
@@ -0,0 +1,9 @@
+// Copyright 2024 QMK -- generated source code only, image retains original copyright
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include <qp.h>
+
+extern const uint32_t gfx_primeplus_length;
+extern const uint8_t gfx_primeplus[317];
diff --git a/keyboards/steelseries/prime_plus/halconf.h b/keyboards/steelseries/prime_plus/halconf.h
new file mode 100644
index 0000000000..683d021cae
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/halconf.h
@@ -0,0 +1,10 @@
+// Copyright 2024 Dasky (@daskygit)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define HAL_USE_SPI TRUE
+#define HAL_USE_I2C TRUE
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>
diff --git a/keyboards/steelseries/prime_plus/keyboard.json b/keyboards/steelseries/prime_plus/keyboard.json
new file mode 100644
index 0000000000..b6acdadb1a
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/keyboard.json
@@ -0,0 +1,59 @@
+{
+ "manufacturer": "SteelSeries",
+ "keyboard_name": "Prime+",
+ "maintainer": "Dasky",
+ "bootloader": "uf2boot",
+ "build": {
+ "debounce_type": "asym_eager_defer_pk",
+ "lto": true
+ },
+ "encoder": {
+ "rotary": [
+ {"pin_a": "B5", "pin_b": "B4", "resolution": 2}
+ ]
+ },
+ "features": {
+ "bootmagic": true,
+ "encoder": true,
+ "extrakey": true,
+ "mousekey": true,
+ "pointing_device": true,
+ "quantum_painter": true,
+ "rgblight": true
+ },
+ "matrix_pins": {
+ "direct": [
+ ["A0", "C15", "A1", "C13", "C14", "A3"]
+ ]
+ },
+ "processor": "STM32F103",
+ "rgblight": {
+ "animations": {
+ "breathing": true,
+ "rainbow_mood": true
+ },
+ "default": {
+ "animation": "rainbow_mood"
+ },
+ "driver": "custom",
+ "led_count": 1
+ },
+ "url": "https://steelseries.com/gaming-mice/prime-plus",
+ "usb": {
+ "device_version": "1.0.0",
+ "pid": "0x0000",
+ "vid": "0xFEED"
+ },
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"matrix": [0, 0], "x": 0, "y": 0},
+ {"matrix": [0, 1], "x": 1, "y": 0},
+ {"matrix": [0, 2], "x": 2, "y": 0},
+ {"matrix": [0, 3], "x": 0, "y": 1},
+ {"matrix": [0, 4], "x": 0, "y": 2},
+ {"matrix": [0, 5], "x": 2, "y": 2}
+ ]
+ }
+ }
+}
diff --git a/keyboards/steelseries/prime_plus/keymaps/default/keymap.c b/keyboards/steelseries/prime_plus/keymaps/default/keymap.c
new file mode 100644
index 0000000000..803f6b47da
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/keymaps/default/keymap.c
@@ -0,0 +1,29 @@
+// Copyright 2024 Dasky (@daskygit)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+// clang-format off
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ // Left, Middle, Right,
+ // Forward
+ // Back
+ // Underneath
+ [0] = LAYOUT(
+ MS_BTN1, MS_BTN3, MS_BTN2,
+ MS_BTN5,
+ MS_BTN4,
+ QK_BOOT
+ )
+};
+// clang-format on
+
+void pointing_device_init_kb(void) {
+ pointing_device_set_cpi(1600);
+}
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+ [0] = {ENCODER_CCW_CW(MS_WHLU, MS_WHLD)},
+};
+#endif
diff --git a/keyboards/steelseries/prime_plus/keymaps/default/rules.mk b/keyboards/steelseries/prime_plus/keymaps/default/rules.mk
new file mode 100644
index 0000000000..ee32568148
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/keymaps/default/rules.mk
@@ -0,0 +1 @@
+ENCODER_MAP_ENABLE = yes
diff --git a/keyboards/steelseries/prime_plus/mcuconf.h b/keyboards/steelseries/prime_plus/mcuconf.h
new file mode 100644
index 0000000000..9086cf2790
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/mcuconf.h
@@ -0,0 +1,18 @@
+// Copyright 2024 Dasky (@daskygit)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_I2C_USE_I2C1
+#define STM32_I2C_USE_I2C1 TRUE
+
+#undef STM32_PWM_USE_TIM1
+#define STM32_PWM_USE_TIM1 TRUE
+
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
+
+#undef STM32_PLLMUL_VALUE
+#define STM32_PLLMUL_VALUE 6
diff --git a/keyboards/steelseries/prime_plus/prime_plus.c b/keyboards/steelseries/prime_plus/prime_plus.c
new file mode 100644
index 0000000000..69db195ef1
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/prime_plus.c
@@ -0,0 +1,40 @@
+// Copyright 2024 Dasky (@daskygit)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "quantum.h"
+#include "graphics/primeplus.qgf.h"
+
+painter_image_handle_t primeplus;
+painter_device_t display;
+
+void board_init(void) {
+ AFIO->MAPR |= AFIO_MAPR_I2C1_REMAP;
+
+ gpio_set_pin_output(A15);
+ gpio_write_pin_high(A15); // Activate D+ pullup
+
+ gpio_set_pin_output(OPTICAL_SW_PWR);
+ gpio_write_pin_low(OPTICAL_SW_PWR); // Enable power for optical switches
+
+ gpio_set_pin_output(OLED_PWR);
+ gpio_write_pin_high(OLED_PWR); // Enable OLED power
+}
+
+void keyboard_post_init_kb(void) {
+ wait_ms(1); // Wait for OLED
+
+ gpio_set_pin_output(OLED_RESET);
+ gpio_write_pin_low(OLED_RESET);
+ wait_us(10); // Minimum wait 1us
+
+ gpio_write_pin_high(OLED_RESET);
+ wait_ms(1); // Minimum wait 1ms
+
+ primeplus = qp_load_image_mem(gfx_primeplus);
+ display = qp_ld7032_make_i2c_device(96, 24, 0x37);
+
+ qp_init(display, QP_ROTATION_180);
+ qp_drawimage(display, 0, 0, primeplus);
+
+ keyboard_post_init_user();
+}
diff --git a/keyboards/steelseries/prime_plus/readme.md b/keyboards/steelseries/prime_plus/readme.md
new file mode 100644
index 0000000000..a2c6366908
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/readme.md
@@ -0,0 +1,28 @@
+# SteelSeries Prime +
+
+![Prime+](https://i.imgur.com/QhNHmwxh.png)
+
+This firmware does not support the dedicated lift off sensor.
+
+Erase with an stlink and flash this [uf2boot bootloader](https://github.com/daskygit/uf2-prime-plus), this is a a one way procedure voiding any warranty so be sure you don't want to use the original manufacturers firmware.
+
+* Keyboard Maintainer: [Dasky](https://github.com/daskygit)
+* Hardware Supported: SteelSeries Prime+
+* Hardware Availability: https://steelseries.com/gaming-mice/prime-plus
+
+Make example for this keyboard (after setting up your build environment):
+
+ make steelseries/prime_plus:default
+
+Flashing example for this keyboard:
+
+ make steelseries/prime_plus:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Bootmagic reset**: Hold down left mouse button and plug in.
+* **Bootloader entry**: Hold the underneath button while plugging in.
diff --git a/keyboards/steelseries/prime_plus/rgblight_custom.c b/keyboards/steelseries/prime_plus/rgblight_custom.c
new file mode 100644
index 0000000000..cdb9e10078
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/rgblight_custom.c
@@ -0,0 +1,45 @@
+// Copyright 2024 Dasky (@daskygit)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "quantum.h"
+
+static PWMConfig pwmCFG = {
+ .frequency = 0xFFFF,
+ .period = 256,
+};
+
+void prime_setleds(rgb_led_t *start_led, uint16_t num_leds) {
+ if (start_led[0].r == 0) {
+ pwmDisableChannel(&RGB_PWM_DRIVER, RGB_RED_PWM_CHANNEL - 1);
+ } else {
+ uint32_t duty = ((uint32_t)0xFFFF * start_led[0].r) / 0xFF;
+ pwmEnableChannel(&RGB_PWM_DRIVER, RGB_RED_PWM_CHANNEL - 1, PWM_FRACTION_TO_WIDTH(&RGB_PWM_DRIVER, 0xFFFF, duty));
+ }
+ if (start_led[0].g == 0) {
+ pwmDisableChannel(&RGB_PWM_DRIVER, RGB_GREEN_PWM_CHANNEL - 1);
+ } else {
+ uint32_t duty = ((uint32_t)0xFFFF * start_led[0].g) / 0xFF;
+ pwmEnableChannel(&RGB_PWM_DRIVER, RGB_GREEN_PWM_CHANNEL - 1, PWM_FRACTION_TO_WIDTH(&RGB_PWM_DRIVER, 0xFFFF, duty));
+ }
+ if (start_led[0].b == 0) {
+ pwmDisableChannel(&RGB_PWM_DRIVER, RGB_BLUE_PWM_CHANNEL - 1);
+ } else {
+ uint32_t duty = ((uint32_t)0xFFFF * start_led[0].b) / 0xFF;
+ pwmEnableChannel(&RGB_PWM_DRIVER, RGB_BLUE_PWM_CHANNEL - 1, PWM_FRACTION_TO_WIDTH(&RGB_PWM_DRIVER, 0xFFFF, duty));
+ }
+}
+
+void prime_initleds(void) {
+ palSetPadMode(PAL_PORT(RGB_RED_PIN), PAL_PAD(RGB_RED_PIN), PAL_MODE_ALTERNATE_PUSHPULL);
+ palSetPadMode(PAL_PORT(RGB_GREEN_PIN), PAL_PAD(RGB_GREEN_PIN), PAL_MODE_ALTERNATE_PUSHPULL);
+ palSetPadMode(PAL_PORT(RGB_BLUE_PIN), PAL_PAD(RGB_BLUE_PIN), PAL_MODE_ALTERNATE_PUSHPULL);
+ pwmCFG.channels[RGB_RED_PWM_CHANNEL - 1].mode = PWM_OUTPUT_ACTIVE_HIGH;
+ pwmCFG.channels[RGB_GREEN_PWM_CHANNEL - 1].mode = PWM_OUTPUT_ACTIVE_HIGH;
+ pwmCFG.channels[RGB_BLUE_PWM_CHANNEL - 1].mode = PWM_OUTPUT_ACTIVE_HIGH;
+ pwmStart(&RGB_PWM_DRIVER, &pwmCFG);
+}
+
+const rgblight_driver_t rgblight_driver = {
+ .init = prime_initleds,
+ .setleds = prime_setleds,
+};
diff --git a/keyboards/steelseries/prime_plus/rules.mk b/keyboards/steelseries/prime_plus/rules.mk
new file mode 100644
index 0000000000..cfcb5f7475
--- /dev/null
+++ b/keyboards/steelseries/prime_plus/rules.mk
@@ -0,0 +1,7 @@
+MCU_LDSCRIPT = STM32F103xB_uf2boot
+
+QUANTUM_PAINTER_DRIVERS = ld7032_i2c
+POINTING_DEVICE_DRIVER = pmw3389
+
+SRC += graphics/primeplus.qgf.c
+SRC += rgblight_custom.c