diff options
author | Ryan <[email protected]> | 2023-08-04 10:16:16 +1000 |
---|---|---|
committer | GitHub <[email protected]> | 2023-08-04 01:16:16 +0100 |
commit | 0b802defd4ad81f38bdd3ae0192e2a834f7d99be (patch) | |
tree | f1577113e925225a25a89e2b02fbea74c65a0322 /docs/feature_haptic_feedback.md | |
parent | c9fa2006d95a68cf8da85e374b205c670260d78b (diff) | |
download | qmk_firmware-0b802defd4ad81f38bdd3ae0192e2a834f7d99be.tar.gz qmk_firmware-0b802defd4ad81f38bdd3ae0192e2a834f7d99be.zip |
haptic: further naming cleanups (#21682)
Diffstat (limited to 'docs/feature_haptic_feedback.md')
-rw-r--r-- | docs/feature_haptic_feedback.md | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md index 02a231138d..68145edd6c 100644 --- a/docs/feature_haptic_feedback.md +++ b/docs/feature_haptic_feedback.md @@ -94,29 +94,29 @@ This driver supports 2 different feedback motors. Set the following in your `con Eccentric Rotating Mass vibration motors (ERM) is motor with a off-set weight attached so when drive signal is attached, the off-set weight spins and causes a sinusoidal wave that translate into vibrations. ```c -#define FB_ERM_LRA 0 -#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ -#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ +#define DRV2605L_FB_ERM_LRA 0 +#define DRV2605L_FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ +#define DRV2605L_FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ /* Please refer to your datasheet for the optimal setting for your specific motor. */ -#define RATED_VOLTAGE 3 -#define V_PEAK 5 +#define DRV2605L_RATED_VOLTAGE 3 +#define DRV2605L_V_PEAK 5 ``` ##### LRA Linear resonant actuators (LRA, also know as a linear vibrator) works different from a ERM. A LRA has a weight and magnet suspended by springs and a voice coil. When the drive signal is applied, the weight would be vibrate on a single axis (side to side or up and down). Since the weight is attached to a spring, there is a resonance effect at a specific frequency. This frequency is where the LRA will operate the most efficiently. Refer to the motor's datasheet for the recommanded range for this frequency. ```c -#define FB_ERM_LRA 1 -#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ -#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ +#define DRV2605L_FB_ERM_LRA 1 +#define DRV2605L_FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ +#define DRV2605L_FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ /* Please refer to your datasheet for the optimal setting for your specific motor. */ -#define RATED_VOLTAGE 2 -#define V_PEAK 2.8 -#define V_RMS 2.0 -#define V_PEAK 2.1 -#define F_LRA 205 /* resonance freq */ +#define DRV2605L_RATED_VOLTAGE 2 +#define DRV2605L_V_PEAK 2.8 +#define DRV2605L_V_RMS 2.0 +#define DRV2605L_V_PEAK 2.1 +#define DRV2605L_F_LRA 205 /* resonance freq */ ``` #### DRV2605L waveform library |