diff options
author | Joe Scotto <[email protected]> | 2023-08-15 21:46:34 -0400 |
---|---|---|
committer | GitHub <[email protected]> | 2023-08-15 18:46:34 -0700 |
commit | 8be8d505c1856bec57cb2cc266f08239b329c29b (patch) | |
tree | 5b8e1b73bd11b46b5b93ff9fb2da221aa5e99061 /keyboards/handwired/scottokeebs/scotto34/readme.md | |
parent | ad954fe8aec7cbae80c07a757791ab195b72f477 (diff) | |
download | qmk_firmware-8be8d505c1856bec57cb2cc266f08239b329c29b.tar.gz qmk_firmware-8be8d505c1856bec57cb2cc266f08239b329c29b.zip |
Add Scotto34 Keyboard (#20943)
Co-authored-by: Albert Y <[email protected]>
Co-authored-by: Drashna Jaelre <[email protected]>
Co-authored-by: Ryan <[email protected]>
Diffstat (limited to 'keyboards/handwired/scottokeebs/scotto34/readme.md')
-rw-r--r-- | keyboards/handwired/scottokeebs/scotto34/readme.md | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/keyboards/handwired/scottokeebs/scotto34/readme.md b/keyboards/handwired/scottokeebs/scotto34/readme.md new file mode 100644 index 0000000000..88e9185ec2 --- /dev/null +++ b/keyboards/handwired/scottokeebs/scotto34/readme.md @@ -0,0 +1,29 @@ +# Scotto34 + + + +A low-profile 34-key split monoblock ortholinear keyboard that uses 18x17mm spaced Choc switches and an exposed controller in the middle. Case files available [here](https://github.com/joe-scotto/scottokeebs). + +* Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto) +* Hardware Supported: RP2040 +* Hardware Availability: [Amazon](https://amazon.com) + +# Compiling + +Make example for this keyboard (after setting up your build environment): + + make handwired/scottokeebs/scotto34:default + +Flashing example for this keyboard: + + make handwired/scottokeebs/scotto34:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file |