aboutsummaryrefslogtreecommitdiff
path: root/keyboards/togkey/pad_pocket/readme.md
diff options
context:
space:
mode:
authorJon Henry Fernandez <[email protected]>2025-07-11 22:29:16 -0500
committerGitHub <[email protected]>2025-07-11 21:29:16 -0600
commit9e757bc2ecc09a48dcde351e8d3e31f02c05e4e7 (patch)
tree402f6c7468dcfedb26602f9f0ae9b09b7ecdc3f8 /keyboards/togkey/pad_pocket/readme.md
parentc3773d9c350cef5c4323c209f85ffd076177f8f1 (diff)
downloadqmk_firmware-9e757bc2ecc09a48dcde351e8d3e31f02c05e4e7.tar.gz
qmk_firmware-9e757bc2ecc09a48dcde351e8d3e31f02c05e4e7.zip
[Keyboard] Add togkey/pad_pocket (#25470)
* Initial Source for Pad Pocket * Added Tap Dance and Combo Configurations * Updated LED Count * Updated read me * Updated Readme * -Removed config.h file - Added tap dance and combos to keymap level - Removed tap dance and combos from keyboard.json - Fixed conflict with submodules * Fixed Formatting
Diffstat (limited to 'keyboards/togkey/pad_pocket/readme.md')
-rw-r--r--keyboards/togkey/pad_pocket/readme.md27
1 files changed, 27 insertions, 0 deletions
diff --git a/keyboards/togkey/pad_pocket/readme.md b/keyboards/togkey/pad_pocket/readme.md
new file mode 100644
index 0000000000..160d698ad6
--- /dev/null
+++ b/keyboards/togkey/pad_pocket/readme.md
@@ -0,0 +1,27 @@
+# pad_pocket
+
+![pad_pocket](https://i.imgur.com/yCrqAe5.jpeg)
+
+A simple 2-Key Macropad Keychain based off an RP2040 Development Board and a custom PCB that is pre-programmed to control media.
+
+* Keyboard Maintainer: [Jon Henry](https://github.com/togkey86)
+* Hardware Supported: Togkey Pad Pocket/Duo PCB, RP2040 Pro Micro Development Board
+* Hardware Availability: (https://togkey.com)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make togkey/pad_pocket:default
+
+Flashing example for this keyboard:
+
+ make togkey/pad_pocket:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (The left key closest to the USB Port) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file