aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Bootloaders/CDC/makefile39
-rw-r--r--Bootloaders/DFU/makefile39
-rw-r--r--Bootloaders/TeensyHID/makefile39
-rw-r--r--Demos/Device/ClassDriver/AudioInput/makefile60
-rw-r--r--Demos/Device/ClassDriver/AudioOutput/AudioOutput.c2
-rw-r--r--Demos/Device/ClassDriver/AudioOutput/makefile62
-rw-r--r--Demos/Device/ClassDriver/CDC/makefile60
-rw-r--r--Demos/Device/ClassDriver/DualCDC/makefile60
-rw-r--r--Demos/Device/ClassDriver/GenericHID/makefile60
-rw-r--r--Demos/Device/ClassDriver/Joystick/makefile60
-rw-r--r--Demos/Device/ClassDriver/Keyboard/makefile60
-rw-r--r--Demos/Device/ClassDriver/KeyboardMouse/makefile60
-rw-r--r--Demos/Device/ClassDriver/MIDI/makefile60
-rw-r--r--Demos/Device/ClassDriver/MassStorage/makefile60
-rw-r--r--Demos/Device/ClassDriver/Mouse/makefile60
-rw-r--r--Demos/Device/ClassDriver/RNDISEthernet/makefile60
-rw-r--r--Demos/Device/ClassDriver/USBtoSerial/makefile60
-rw-r--r--Demos/Device/Incomplete/Sideshow/makefile60
-rw-r--r--Demos/Device/LowLevel/AudioInput/makefile60
-rw-r--r--Demos/Device/LowLevel/AudioOutput/AudioOutput.c2
-rw-r--r--Demos/Device/LowLevel/AudioOutput/makefile60
-rw-r--r--Demos/Device/LowLevel/CDC/makefile60
-rw-r--r--Demos/Device/LowLevel/DualCDC/makefile60
-rw-r--r--Demos/Device/LowLevel/GenericHID/makefile60
-rw-r--r--Demos/Device/LowLevel/Joystick/makefile60
-rw-r--r--Demos/Device/LowLevel/Keyboard/makefile60
-rw-r--r--Demos/Device/LowLevel/KeyboardMouse/makefile60
-rw-r--r--Demos/Device/LowLevel/MIDI/makefile60
-rw-r--r--Demos/Device/LowLevel/MassStorage/makefile60
-rw-r--r--Demos/Device/LowLevel/Mouse/makefile60
-rw-r--r--Demos/Device/LowLevel/RNDISEthernet/makefile60
-rw-r--r--Demos/Device/LowLevel/USBtoSerial/makefile60
-rw-r--r--Demos/Host/ClassDriver/CDCHost/makefile60
-rw-r--r--Demos/Host/ClassDriver/MouseHost/makefile60
-rw-r--r--Demos/Host/Incomplete/BluetoothHost/makefile60
-rw-r--r--Demos/Host/LowLevel/CDCHost/makefile60
-rw-r--r--Demos/Host/LowLevel/GenericHIDHost/makefile60
-rw-r--r--Demos/Host/LowLevel/KeyboardHost/makefile60
-rw-r--r--Demos/Host/LowLevel/KeyboardHostWithParser/makefile60
-rw-r--r--Demos/Host/LowLevel/MassStorageHost/makefile60
-rw-r--r--Demos/Host/LowLevel/MouseHost/makefile60
-rw-r--r--Demos/Host/LowLevel/MouseHostWithParser/makefile60
-rw-r--r--Demos/Host/LowLevel/PrinterHost/makefile60
-rw-r--r--Demos/Host/LowLevel/StillImageHost/makefile60
-rw-r--r--Demos/OTG/TestApp/makefile60
-rw-r--r--Projects/Benito/makefile60
-rw-r--r--Projects/Magstripe/makefile60
-rw-r--r--Projects/MissileLauncher/makefile60
48 files changed, 968 insertions, 1735 deletions
diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile
index 21524086ce..43341a6d5b 100644
--- a/Bootloaders/CDC/makefile
+++ b/Bootloaders/CDC/makefile
@@ -458,7 +458,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -501,27 +501,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -707,8 +709,7 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen \ No newline at end of file
diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile
index 0964f03315..dc275bc65b 100644
--- a/Bootloaders/DFU/makefile
+++ b/Bootloaders/DFU/makefile
@@ -460,7 +460,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -503,27 +503,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -709,8 +711,7 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen \ No newline at end of file
diff --git a/Bootloaders/TeensyHID/makefile b/Bootloaders/TeensyHID/makefile
index 0751024c3d..9b6c5d7d45 100644
--- a/Bootloaders/TeensyHID/makefile
+++ b/Bootloaders/TeensyHID/makefile
@@ -459,7 +459,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -502,27 +502,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -708,8 +710,7 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile
index 98318eadcb..e97cffb2fb 100644
--- a/Demos/Device/ClassDriver/AudioInput/makefile
+++ b/Demos/Device/ClassDriver/AudioInput/makefile
@@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -508,27 +508,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -540,26 +542,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
index bbcd2fd7ca..9a63af68a2 100644
--- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
+++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
@@ -103,8 +103,10 @@ void ProcessNextSample(void)
int8_t LeftSample_8Bit = (LeftSample_16Bit >> 8);
int8_t RightSample_8Bit = (RightSample_16Bit >> 8);
+#if !defined(AUDIO_OUT_STEREO)
/* Mix the two channels together to produce a mono, 8-bit sample */
int8_t MixedSample_8Bit = (((int16_t)LeftSample_8Bit + (int16_t)RightSample_8Bit) >> 1);
+#endif
#if defined(AUDIO_OUT_MONO)
/* Load the sample into the PWM timer channel */
diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile
index 9c4605e886..d61c27a214 100644
--- a/Demos/Device/ClassDriver/AudioOutput/makefile
+++ b/Demos/Device/ClassDriver/AudioOutput/makefile
@@ -193,7 +193,7 @@ CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
-CDEFS += -DAUDIO_OUT_MONO
+CDEFS += -DAUDIO_OUT_STEREO
# Place -D or -U options here for ASM sources
@@ -466,7 +466,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -509,27 +509,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -541,26 +543,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -735,8 +717,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/CDC/makefile b/Demos/Device/ClassDriver/CDC/makefile
index 03f1633a6f..e822c24ebe 100644
--- a/Demos/Device/ClassDriver/CDC/makefile
+++ b/Demos/Device/ClassDriver/CDC/makefile
@@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -507,27 +507,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -539,26 +541,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/DualCDC/makefile b/Demos/Device/ClassDriver/DualCDC/makefile
index 7e1c1f91dc..46ec2294b1 100644
--- a/Demos/Device/ClassDriver/DualCDC/makefile
+++ b/Demos/Device/ClassDriver/DualCDC/makefile
@@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -507,27 +507,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -539,26 +541,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile
index ee6d9616ed..bc3dc3a296 100644
--- a/Demos/Device/ClassDriver/GenericHID/makefile
+++ b/Demos/Device/ClassDriver/GenericHID/makefile
@@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -508,27 +508,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -540,26 +542,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile
index efc011f6f8..393e58b14c 100644
--- a/Demos/Device/ClassDriver/Joystick/makefile
+++ b/Demos/Device/ClassDriver/Joystick/makefile
@@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -508,27 +508,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -540,26 +542,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile
index 19208d9708..5a11201d6c 100644
--- a/Demos/Device/ClassDriver/Keyboard/makefile
+++ b/Demos/Device/ClassDriver/Keyboard/makefile
@@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -508,27 +508,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -540,26 +542,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile
index 7f606fe361..1b086f3bf9 100644
--- a/Demos/Device/ClassDriver/KeyboardMouse/makefile
+++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile
@@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -508,27 +508,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -540,26 +542,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile
index ea4d3eea4e..694019e440 100644
--- a/Demos/Device/ClassDriver/MIDI/makefile
+++ b/Demos/Device/ClassDriver/MIDI/makefile
@@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -507,27 +507,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -539,26 +541,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile
index e79258c31c..15fc6f1b87 100644
--- a/Demos/Device/ClassDriver/MassStorage/makefile
+++ b/Demos/Device/ClassDriver/MassStorage/makefile
@@ -466,7 +466,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -509,27 +509,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -541,26 +543,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -735,8 +717,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile
index 67864d613b..7b1cd5b8d7 100644
--- a/Demos/Device/ClassDriver/Mouse/makefile
+++ b/Demos/Device/ClassDriver/Mouse/makefile
@@ -466,7 +466,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -509,27 +509,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -541,26 +543,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -735,8 +717,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile
index 8a7b49b310..60a07ce785 100644
--- a/Demos/Device/ClassDriver/RNDISEthernet/makefile
+++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile
@@ -475,7 +475,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -518,27 +518,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -550,26 +552,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -744,8 +726,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/ClassDriver/USBtoSerial/makefile b/Demos/Device/ClassDriver/USBtoSerial/makefile
index a830ec3540..930652746f 100644
--- a/Demos/Device/ClassDriver/USBtoSerial/makefile
+++ b/Demos/Device/ClassDriver/USBtoSerial/makefile
@@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -508,27 +508,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -540,26 +542,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile
index aa44b24ef8..1754388f0d 100644
--- a/Demos/Device/Incomplete/Sideshow/makefile
+++ b/Demos/Device/Incomplete/Sideshow/makefile
@@ -469,7 +469,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -512,27 +512,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -544,26 +546,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -738,8 +720,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile
index 36eafefcb8..d1d946ceb5 100644
--- a/Demos/Device/LowLevel/AudioInput/makefile
+++ b/Demos/Device/LowLevel/AudioInput/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
index 2b2cdcbbfe..c814c8ce51 100644
--- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
+++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
@@ -210,8 +210,10 @@ void USB_Audio_Task(void)
int8_t LeftSample_8Bit = (LeftSample_16Bit >> 8);
int8_t RightSample_8Bit = (RightSample_16Bit >> 8);
+#if !defined(AUDIO_OUT_STEREO)
/* Mix the two channels together to produce a mono, 8-bit sample */
int8_t MixedSample_8Bit = (((int16_t)LeftSample_8Bit + (int16_t)RightSample_8Bit) >> 1);
+#endif
#if defined(AUDIO_OUT_MONO)
/* Load the sample into the PWM timer channel */
diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile
index 9505fde0ba..e3499b40a9 100644
--- a/Demos/Device/LowLevel/AudioOutput/makefile
+++ b/Demos/Device/LowLevel/AudioOutput/makefile
@@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -507,27 +507,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -539,26 +541,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/CDC/makefile b/Demos/Device/LowLevel/CDC/makefile
index 4990559fdf..80821ad6bb 100644
--- a/Demos/Device/LowLevel/CDC/makefile
+++ b/Demos/Device/LowLevel/CDC/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/DualCDC/makefile b/Demos/Device/LowLevel/DualCDC/makefile
index 99da8cf425..117fdbd834 100644
--- a/Demos/Device/LowLevel/DualCDC/makefile
+++ b/Demos/Device/LowLevel/DualCDC/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile
index 407536c7fe..a6130c35d7 100644
--- a/Demos/Device/LowLevel/GenericHID/makefile
+++ b/Demos/Device/LowLevel/GenericHID/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile
index b418ba2228..0510a69926 100644
--- a/Demos/Device/LowLevel/Joystick/makefile
+++ b/Demos/Device/LowLevel/Joystick/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile
index af351c099c..d0a87a2c95 100644
--- a/Demos/Device/LowLevel/Keyboard/makefile
+++ b/Demos/Device/LowLevel/Keyboard/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile
index 9474f89a69..597658e6c3 100644
--- a/Demos/Device/LowLevel/KeyboardMouse/makefile
+++ b/Demos/Device/LowLevel/KeyboardMouse/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile
index 1f0d8159e4..1789c396e4 100644
--- a/Demos/Device/LowLevel/MIDI/makefile
+++ b/Demos/Device/LowLevel/MIDI/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile
index b985410973..6d3fb0a04d 100644
--- a/Demos/Device/LowLevel/MassStorage/makefile
+++ b/Demos/Device/LowLevel/MassStorage/makefile
@@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -508,27 +508,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -540,26 +542,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile
index 9ed44c3ffa..beb76ab8bf 100644
--- a/Demos/Device/LowLevel/Mouse/makefile
+++ b/Demos/Device/LowLevel/Mouse/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile
index f060c662e2..612718e637 100644
--- a/Demos/Device/LowLevel/RNDISEthernet/makefile
+++ b/Demos/Device/LowLevel/RNDISEthernet/makefile
@@ -476,7 +476,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -519,27 +519,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -551,26 +553,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -745,8 +727,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Device/LowLevel/USBtoSerial/makefile b/Demos/Device/LowLevel/USBtoSerial/makefile
index 8e989d52c4..9a08fb4ddf 100644
--- a/Demos/Device/LowLevel/USBtoSerial/makefile
+++ b/Demos/Device/LowLevel/USBtoSerial/makefile
@@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -507,27 +507,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -539,26 +541,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Host/ClassDriver/CDCHost/makefile b/Demos/Host/ClassDriver/CDCHost/makefile
index 7c12beae17..4dd06ebee0 100644
--- a/Demos/Host/ClassDriver/CDCHost/makefile
+++ b/Demos/Host/ClassDriver/CDCHost/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Host/ClassDriver/MouseHost/makefile b/Demos/Host/ClassDriver/MouseHost/makefile
index 300d9b9436..0cd3489c61 100644
--- a/Demos/Host/ClassDriver/MouseHost/makefile
+++ b/Demos/Host/ClassDriver/MouseHost/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Host/Incomplete/BluetoothHost/makefile b/Demos/Host/Incomplete/BluetoothHost/makefile
index bf63aee47c..28f64e223a 100644
--- a/Demos/Host/Incomplete/BluetoothHost/makefile
+++ b/Demos/Host/Incomplete/BluetoothHost/makefile
@@ -466,7 +466,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -509,27 +509,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -541,26 +543,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -735,8 +717,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Host/LowLevel/CDCHost/makefile b/Demos/Host/LowLevel/CDCHost/makefile
index a15fbf3de1..b108bb51d8 100644
--- a/Demos/Host/LowLevel/CDCHost/makefile
+++ b/Demos/Host/LowLevel/CDCHost/makefile
@@ -462,7 +462,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -505,27 +505,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -537,26 +539,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -731,8 +713,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Host/LowLevel/GenericHIDHost/makefile b/Demos/Host/LowLevel/GenericHIDHost/makefile
index a008c2c20e..1e3dd343d5 100644
--- a/Demos/Host/LowLevel/GenericHIDHost/makefile
+++ b/Demos/Host/LowLevel/GenericHIDHost/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Host/LowLevel/KeyboardHost/makefile b/Demos/Host/LowLevel/KeyboardHost/makefile
index f45366c3b8..ececa9fb53 100644
--- a/Demos/Host/LowLevel/KeyboardHost/makefile
+++ b/Demos/Host/LowLevel/KeyboardHost/makefile
@@ -462,7 +462,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -505,27 +505,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -537,26 +539,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -731,8 +713,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
index a322b841c0..bb5a21daee 100644
--- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
+++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
@@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -507,27 +507,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -539,26 +541,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Host/LowLevel/MassStorageHost/makefile b/Demos/Host/LowLevel/MassStorageHost/makefile
index d44ead5f4c..6993d3ca9e 100644
--- a/Demos/Host/LowLevel/MassStorageHost/makefile
+++ b/Demos/Host/LowLevel/MassStorageHost/makefile
@@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -507,27 +507,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -539,26 +541,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Host/LowLevel/MouseHost/makefile b/Demos/Host/LowLevel/MouseHost/makefile
index 58931ced1c..ca6735edc3 100644
--- a/Demos/Host/LowLevel/MouseHost/makefile
+++ b/Demos/Host/LowLevel/MouseHost/makefile
@@ -462,7 +462,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -505,27 +505,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -537,26 +539,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -731,8 +713,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Host/LowLevel/MouseHostWithParser/makefile b/Demos/Host/LowLevel/MouseHostWithParser/makefile
index 13adc14214..bb2349d72b 100644
--- a/Demos/Host/LowLevel/MouseHostWithParser/makefile
+++ b/Demos/Host/LowLevel/MouseHostWithParser/makefile
@@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -507,27 +507,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -539,26 +541,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Host/LowLevel/PrinterHost/makefile b/Demos/Host/LowLevel/PrinterHost/makefile
index a56d9f2a82..371f814ab0 100644
--- a/Demos/Host/LowLevel/PrinterHost/makefile
+++ b/Demos/Host/LowLevel/PrinterHost/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/Host/LowLevel/StillImageHost/makefile b/Demos/Host/LowLevel/StillImageHost/makefile
index 186d57e0ce..7b3cf16ffb 100644
--- a/Demos/Host/LowLevel/StillImageHost/makefile
+++ b/Demos/Host/LowLevel/StillImageHost/makefile
@@ -462,7 +462,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -505,27 +505,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -537,26 +539,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -731,8 +713,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Demos/OTG/TestApp/makefile b/Demos/OTG/TestApp/makefile
index 763838e3ef..14ebf4a50b 100644
--- a/Demos/OTG/TestApp/makefile
+++ b/Demos/OTG/TestApp/makefile
@@ -462,7 +462,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -505,27 +505,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -537,26 +539,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -731,8 +713,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Projects/Benito/makefile b/Projects/Benito/makefile
index a785788c7d..634d56bb98 100644
--- a/Projects/Benito/makefile
+++ b/Projects/Benito/makefile
@@ -469,7 +469,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -512,27 +512,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -544,26 +546,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -738,8 +720,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile
index dda15ac7cc..b308d833cf 100644
--- a/Projects/Magstripe/makefile
+++ b/Projects/Magstripe/makefile
@@ -473,7 +473,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -516,27 +516,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -548,26 +550,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -742,8 +724,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee \ No newline at end of file
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee \ No newline at end of file
diff --git a/Projects/MissileLauncher/makefile b/Projects/MissileLauncher/makefile
index 8c29bcf7f8..867b57a4b0 100644
--- a/Projects/MissileLauncher/makefile
+++ b/Projects/MissileLauncher/makefile
@@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@@ -506,27 +506,29 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-checkhooks: build
+showeventhooks: build
@echo
- @echo ------- Unhooked LUFA Events -------
+ @echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ------------------------------------
+ @echo --------------------------------------
-checklibmode:
+showliboptions:
@echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
-checkboard:
+showtarget:
@echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
# Display compiler version information.
gccversion :
@@ -538,26 +540,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee
+.PHONY : all showeventhooks showliboptions showtarget \
+begin finish end sizebefore sizeafter gccversion build \
+elf hex eep lss sym coff extcoff program clean debug \
+clean_list clean_binary gdb-config doxygen dfu flip \
+flip-ee dfu-ee