aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Bootloaders/CDC/makefile2
-rw-r--r--Bootloaders/DFU/makefile2
-rw-r--r--Demos/Device/ClassDriver/AudioInput/makefile6
-rw-r--r--Demos/Device/ClassDriver/AudioOutput/makefile6
-rw-r--r--Demos/Device/ClassDriver/DualVirtualSerial/makefile6
-rw-r--r--Demos/Device/ClassDriver/GenericHID/makefile6
-rw-r--r--Demos/Device/ClassDriver/Joystick/makefile6
-rw-r--r--Demos/Device/ClassDriver/Keyboard/makefile6
-rw-r--r--Demos/Device/ClassDriver/KeyboardMouse/makefile6
-rw-r--r--Demos/Device/ClassDriver/MIDI/makefile6
-rw-r--r--Demos/Device/ClassDriver/MassStorage/makefile6
-rw-r--r--Demos/Device/ClassDriver/MassStorageKeyboard/makefile6
-rw-r--r--Demos/Device/ClassDriver/Mouse/makefile6
-rw-r--r--Demos/Device/ClassDriver/RNDISEthernet/makefile6
-rw-r--r--Demos/Device/ClassDriver/VirtualSerial/makefile6
-rw-r--r--Demos/Device/ClassDriver/VirtualSerialMouse/makefile6
-rw-r--r--Demos/Device/Incomplete/Sideshow/makefile6
-rw-r--r--Demos/Device/Incomplete/TestAndMeasurement/makefile6
-rw-r--r--Demos/Device/LowLevel/AudioInput/makefile6
-rw-r--r--Demos/Device/LowLevel/AudioOutput/makefile6
-rw-r--r--Demos/Device/LowLevel/DualVirtualSerial/makefile6
-rw-r--r--Demos/Device/LowLevel/GenericHID/makefile6
-rw-r--r--Demos/Device/LowLevel/Joystick/makefile6
-rw-r--r--Demos/Device/LowLevel/Keyboard/makefile6
-rw-r--r--Demos/Device/LowLevel/KeyboardMouse/makefile6
-rw-r--r--Demos/Device/LowLevel/MIDI/makefile6
-rw-r--r--Demos/Device/LowLevel/MassStorage/makefile6
-rw-r--r--Demos/Device/LowLevel/Mouse/makefile6
-rw-r--r--Demos/Device/LowLevel/RNDISEthernet/makefile6
-rw-r--r--Demos/Device/LowLevel/VirtualSerial/makefile6
-rw-r--r--Demos/DualRole/ClassDriver/MouseHostDevice/makefile6
-rw-r--r--Demos/Host/ClassDriver/JoystickHostWithParser/makefile6
-rw-r--r--Demos/Host/ClassDriver/KeyboardHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/KeyboardHostWithParser/makefile6
-rw-r--r--Demos/Host/ClassDriver/MIDIHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/MassStorageHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/MouseHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/MouseHostWithParser/makefile6
-rw-r--r--Demos/Host/ClassDriver/PrinterHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/RNDISEthernetHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/StillImageHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/VirtualSerialHost/makefile6
-rw-r--r--Demos/Host/Incomplete/BluetoothHost/makefile6
-rw-r--r--Demos/Host/LowLevel/GenericHIDHost/makefile6
-rw-r--r--Demos/Host/LowLevel/JoystickHostWithParser/makefile6
-rw-r--r--Demos/Host/LowLevel/KeyboardHost/makefile6
-rw-r--r--Demos/Host/LowLevel/KeyboardHostWithParser/makefile6
-rw-r--r--Demos/Host/LowLevel/MIDIHost/makefile6
-rw-r--r--Demos/Host/LowLevel/MassStorageHost/makefile6
-rw-r--r--Demos/Host/LowLevel/MouseHost/makefile6
-rw-r--r--Demos/Host/LowLevel/MouseHostWithParser/makefile6
-rw-r--r--Demos/Host/LowLevel/PrinterHost/makefile6
-rw-r--r--Demos/Host/LowLevel/RNDISEthernetHost/makefile6
-rw-r--r--Demos/Host/LowLevel/StillImageHost/makefile6
-rw-r--r--Demos/Host/LowLevel/VirtualSerialHost/makefile6
-rw-r--r--LUFA/CodeTemplates/makefile_template6
-rw-r--r--LUFA/ManPages/ChangeLog.txt3
-rw-r--r--LUFA/ManPages/WritingBoardDrivers.txt10
-rw-r--r--Projects/AVRISP-MKII/makefile6
-rw-r--r--Projects/Benito/makefile6
-rw-r--r--Projects/Incomplete/StandaloneProgrammer/makefile6
-rw-r--r--Projects/LEDNotifier/makefile6
-rw-r--r--Projects/Magstripe/makefile6
-rw-r--r--Projects/MissileLauncher/makefile6
-rw-r--r--Projects/RelayBoard/makefile6
-rw-r--r--Projects/TempDataLogger/makefile6
-rw-r--r--Projects/USBtoSerial/makefile6
-rw-r--r--Projects/Webserver/makefile6
-rw-r--r--Projects/XPLAINBridge/makefile6
69 files changed, 205 insertions, 202 deletions
diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile
index 494381e397..44667b3975 100644
--- a/Bootloaders/CDC/makefile
+++ b/Bootloaders/CDC/makefile
@@ -54,7 +54,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile
index 094328e23f..16933002da 100644
--- a/Bootloaders/DFU/makefile
+++ b/Bootloaders/DFU/makefile
@@ -54,7 +54,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile
index 86f34e6cec..470f83211e 100644
--- a/Demos/Device/ClassDriver/AudioInput/makefile
+++ b/Demos/Device/ClassDriver/AudioInput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -523,7 +523,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -534,7 +534,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile
index e1b0dd81cf..8f2978b8a9 100644
--- a/Demos/Device/ClassDriver/AudioOutput/makefile
+++ b/Demos/Device/ClassDriver/AudioOutput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -525,7 +525,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -536,7 +536,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
index da7c7ca2fa..e270575e20 100644
--- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile
index 8109121632..b2a80ea86e 100644
--- a/Demos/Device/ClassDriver/GenericHID/makefile
+++ b/Demos/Device/ClassDriver/GenericHID/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile
index 40ace20d1c..37431cd8eb 100644
--- a/Demos/Device/ClassDriver/Joystick/makefile
+++ b/Demos/Device/ClassDriver/Joystick/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile
index b392752c80..9fe72e23ec 100644
--- a/Demos/Device/ClassDriver/Keyboard/makefile
+++ b/Demos/Device/ClassDriver/Keyboard/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile
index b7dbd1f639..115759ed85 100644
--- a/Demos/Device/ClassDriver/KeyboardMouse/makefile
+++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile
index 038f0446a9..e6aec7eb61 100644
--- a/Demos/Device/ClassDriver/MIDI/makefile
+++ b/Demos/Device/ClassDriver/MIDI/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile
index 390adaecbb..6ec34ec73c 100644
--- a/Demos/Device/ClassDriver/MassStorage/makefile
+++ b/Demos/Device/ClassDriver/MassStorage/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
index 154c3e1eec..bc1b9ce14e 100644
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile
index c7cb09a330..306f2e6832 100644
--- a/Demos/Device/ClassDriver/Mouse/makefile
+++ b/Demos/Device/ClassDriver/Mouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile
index 59226883d5..758a77f829 100644
--- a/Demos/Device/ClassDriver/RNDISEthernet/makefile
+++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -540,7 +540,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -551,7 +551,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile
index 52a8cce587..d40208c39a 100644
--- a/Demos/Device/ClassDriver/VirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
index 240628d344..7e2bd6d49c 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile
index f62ffc7ff4..288188a89a 100644
--- a/Demos/Device/Incomplete/Sideshow/makefile
+++ b/Demos/Device/Incomplete/Sideshow/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -527,7 +527,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -538,7 +538,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/Incomplete/TestAndMeasurement/makefile b/Demos/Device/Incomplete/TestAndMeasurement/makefile
index c7f41ebde5..7b2a5b102c 100644
--- a/Demos/Device/Incomplete/TestAndMeasurement/makefile
+++ b/Demos/Device/Incomplete/TestAndMeasurement/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile
index 86bc0948c5..3e4273a73d 100644
--- a/Demos/Device/LowLevel/AudioInput/makefile
+++ b/Demos/Device/LowLevel/AudioInput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -522,7 +522,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile
index bf189c309b..86bb0b7914 100644
--- a/Demos/Device/LowLevel/AudioOutput/makefile
+++ b/Demos/Device/LowLevel/AudioOutput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile
index fbd5d459ba..40b5a2c2fd 100644
--- a/Demos/Device/LowLevel/DualVirtualSerial/makefile
+++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile
index 9fa56a5507..be6da3c6b3 100644
--- a/Demos/Device/LowLevel/GenericHID/makefile
+++ b/Demos/Device/LowLevel/GenericHID/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile
index 553a89aee7..49697f7aba 100644
--- a/Demos/Device/LowLevel/Joystick/makefile
+++ b/Demos/Device/LowLevel/Joystick/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile
index a7fcdbb2c1..3794c50888 100644
--- a/Demos/Device/LowLevel/Keyboard/makefile
+++ b/Demos/Device/LowLevel/Keyboard/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile
index d59329848f..dcd70e04b3 100644
--- a/Demos/Device/LowLevel/KeyboardMouse/makefile
+++ b/Demos/Device/LowLevel/KeyboardMouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile
index 784709d4ae..45a8c06bea 100644
--- a/Demos/Device/LowLevel/MIDI/makefile
+++ b/Demos/Device/LowLevel/MIDI/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile
index 9f740fb3bf..b55334b926 100644
--- a/Demos/Device/LowLevel/MassStorage/makefile
+++ b/Demos/Device/LowLevel/MassStorage/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -523,7 +523,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -534,7 +534,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile
index af82d9aafa..99467e769b 100644
--- a/Demos/Device/LowLevel/Mouse/makefile
+++ b/Demos/Device/LowLevel/Mouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile
index 0bb88470e2..ed17d36623 100644
--- a/Demos/Device/LowLevel/RNDISEthernet/makefile
+++ b/Demos/Device/LowLevel/RNDISEthernet/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -541,7 +541,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -552,7 +552,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile
index dacd22e8d4..89ad42ca46 100644
--- a/Demos/Device/LowLevel/VirtualSerial/makefile
+++ b/Demos/Device/LowLevel/VirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
index 9106172f2b..4dd8f9f7f2 100644
--- a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
+++ b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
index 44b3484472..fb7ceecaec 100644
--- a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/KeyboardHost/makefile b/Demos/Host/ClassDriver/KeyboardHost/makefile
index d3765b6f1a..fb6c11072d 100644
--- a/Demos/Host/ClassDriver/KeyboardHost/makefile
+++ b/Demos/Host/ClassDriver/KeyboardHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
index 4c26502ee5..172137bf62 100644
--- a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/MIDIHost/makefile b/Demos/Host/ClassDriver/MIDIHost/makefile
index dfeabfbd8b..dc5811fb19 100644
--- a/Demos/Host/ClassDriver/MIDIHost/makefile
+++ b/Demos/Host/ClassDriver/MIDIHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/MassStorageHost/makefile b/Demos/Host/ClassDriver/MassStorageHost/makefile
index 4b33cb3dd2..f63a44882c 100644
--- a/Demos/Host/ClassDriver/MassStorageHost/makefile
+++ b/Demos/Host/ClassDriver/MassStorageHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/MouseHost/makefile b/Demos/Host/ClassDriver/MouseHost/makefile
index 16e79eade2..5bd6b12e85 100644
--- a/Demos/Host/ClassDriver/MouseHost/makefile
+++ b/Demos/Host/ClassDriver/MouseHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/makefile b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
index c409796768..6ef2846fd6 100644
--- a/Demos/Host/ClassDriver/MouseHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/PrinterHost/makefile b/Demos/Host/ClassDriver/PrinterHost/makefile
index a4fa937b59..d0da5af9ec 100644
--- a/Demos/Host/ClassDriver/PrinterHost/makefile
+++ b/Demos/Host/ClassDriver/PrinterHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
index 2b33d174a8..f01f2f9fa3 100644
--- a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
+++ b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/StillImageHost/makefile b/Demos/Host/ClassDriver/StillImageHost/makefile
index 4069d91964..203e2cd73d 100644
--- a/Demos/Host/ClassDriver/StillImageHost/makefile
+++ b/Demos/Host/ClassDriver/StillImageHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/makefile b/Demos/Host/ClassDriver/VirtualSerialHost/makefile
index 27f813b3f9..47e9da17c6 100644
--- a/Demos/Host/ClassDriver/VirtualSerialHost/makefile
+++ b/Demos/Host/ClassDriver/VirtualSerialHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/Incomplete/BluetoothHost/makefile b/Demos/Host/Incomplete/BluetoothHost/makefile
index c65cd0f5f1..9dc804ac20 100644
--- a/Demos/Host/Incomplete/BluetoothHost/makefile
+++ b/Demos/Host/Incomplete/BluetoothHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -529,7 +529,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -540,7 +540,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/GenericHIDHost/makefile b/Demos/Host/LowLevel/GenericHIDHost/makefile
index 1541d5a3ef..d82d5181c9 100644
--- a/Demos/Host/LowLevel/GenericHIDHost/makefile
+++ b/Demos/Host/LowLevel/GenericHIDHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/makefile b/Demos/Host/LowLevel/JoystickHostWithParser/makefile
index 3f00103553..c44e69c49c 100644
--- a/Demos/Host/LowLevel/JoystickHostWithParser/makefile
+++ b/Demos/Host/LowLevel/JoystickHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/KeyboardHost/makefile b/Demos/Host/LowLevel/KeyboardHost/makefile
index 866d2120d8..b9d9f240aa 100644
--- a/Demos/Host/LowLevel/KeyboardHost/makefile
+++ b/Demos/Host/LowLevel/KeyboardHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
index 83abe71724..64516d44cb 100644
--- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
+++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/MIDIHost/makefile b/Demos/Host/LowLevel/MIDIHost/makefile
index eb040d06e5..3d73698761 100644
--- a/Demos/Host/LowLevel/MIDIHost/makefile
+++ b/Demos/Host/LowLevel/MIDIHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/MassStorageHost/makefile b/Demos/Host/LowLevel/MassStorageHost/makefile
index f96868d8c1..220d71d621 100644
--- a/Demos/Host/LowLevel/MassStorageHost/makefile
+++ b/Demos/Host/LowLevel/MassStorageHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -522,7 +522,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/MouseHost/makefile b/Demos/Host/LowLevel/MouseHost/makefile
index b71f82e8d8..e7df96428e 100644
--- a/Demos/Host/LowLevel/MouseHost/makefile
+++ b/Demos/Host/LowLevel/MouseHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/MouseHostWithParser/makefile b/Demos/Host/LowLevel/MouseHostWithParser/makefile
index ffe5f128f2..5fd2f9cf26 100644
--- a/Demos/Host/LowLevel/MouseHostWithParser/makefile
+++ b/Demos/Host/LowLevel/MouseHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/PrinterHost/makefile b/Demos/Host/LowLevel/PrinterHost/makefile
index 65c7ff8fb0..93bb4ad5d5 100644
--- a/Demos/Host/LowLevel/PrinterHost/makefile
+++ b/Demos/Host/LowLevel/PrinterHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/makefile b/Demos/Host/LowLevel/RNDISEthernetHost/makefile
index 3e899b3706..87b65f0da9 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/makefile
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/StillImageHost/makefile b/Demos/Host/LowLevel/StillImageHost/makefile
index bd6ee27083..72d7707a4c 100644
--- a/Demos/Host/LowLevel/StillImageHost/makefile
+++ b/Demos/Host/LowLevel/StillImageHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/VirtualSerialHost/makefile b/Demos/Host/LowLevel/VirtualSerialHost/makefile
index 584612d65b..935391ae68 100644
--- a/Demos/Host/LowLevel/VirtualSerialHost/makefile
+++ b/Demos/Host/LowLevel/VirtualSerialHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/LUFA/CodeTemplates/makefile_template b/LUFA/CodeTemplates/makefile_template
index a1176a428e..c10bcf9ec5 100644
--- a/LUFA/CodeTemplates/makefile_template
+++ b/LUFA/CodeTemplates/makefile_template
@@ -66,7 +66,7 @@ MCU = ### INSERT NAME OF MICROCONTROLLER MODEL HERE ###
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = ### INSERT NAME OF BOARD HERE, OR NONE IF NO BOARD DRIVERS USED ###
+BOARD = ### INSERT NAME OF BOARD HERE, OR NONE IF NO BOARD DRIVERS USED ###
# Processor frequency.
@@ -516,7 +516,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -527,7 +527,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 24dd943fbe..132aa4898b 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -42,6 +42,8 @@
* to free up the Start of Frame flag for interrupt use in the user application
* - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany)
* - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode now defaults to UID selection mode
+ * - Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's
+ * flash memory are ignored (thanks to Axel Rohde)
*
* <b>Fixed:</b>
* - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist
@@ -59,6 +61,7 @@
* - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe
* - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode
* - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests
+ * - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target
*
* \section Sec_ChangeLog100807 Version 100807
* <b>New:</b>
diff --git a/LUFA/ManPages/WritingBoardDrivers.txt b/LUFA/ManPages/WritingBoardDrivers.txt
index c3371a93a5..dd0ea47c73 100644
--- a/LUFA/ManPages/WritingBoardDrivers.txt
+++ b/LUFA/ManPages/WritingBoardDrivers.txt
@@ -18,9 +18,9 @@
* with the LUFA hardware API. To do this, the BOARD macro should be defined to the value BOARD_USER. This indicates
* that the board level drivers should be located in a folder named "Board" located inside the application's folder.
*
- * When used, the driver stub files located in the DriverStubs folder should be copied to the user Board directory,
- * and fleshed out to include the values and code needed to control the custom board hardware. Once done, the existing
- * LUFA board level APIs (accessed in the regular LUFA/Drivers/Board/ folder) will redirect to the user board drivers,
- * maintaining code compatibility and allowing for a different board to be selected through the project makefile with
- * no code changes.
+ * When used, the driver stub files located in the LUFA/CodeTemplates/DriverStubs folder should be copied to the user
+ * Board/ directory, and fleshed out to include the values and code needed to control the custom board hardware. Once
+ * done, the existing LUFA board level APIs (accessed in the regular LUFA/Drivers/Board/ folder) will redirect to the
+ * user board drivers, maintaining code compatibility and allowing for a different board to be selected through the
+ * project makefile with no code changes.
*/
diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index db119534f5..a995bddc02 100644
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -544,7 +544,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -555,7 +555,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Projects/Benito/makefile b/Projects/Benito/makefile
index 9d29f6a40a..35073f8617 100644
--- a/Projects/Benito/makefile
+++ b/Projects/Benito/makefile
@@ -66,7 +66,7 @@ MCU = atmega32u2
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = BENITO
+BOARD = BENITO
# Processor frequency.
@@ -530,7 +530,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -541,7 +541,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Projects/Incomplete/StandaloneProgrammer/makefile b/Projects/Incomplete/StandaloneProgrammer/makefile
index 47fed5c193..40de1948e2 100644
--- a/Projects/Incomplete/StandaloneProgrammer/makefile
+++ b/Projects/Incomplete/StandaloneProgrammer/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -530,7 +530,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -541,7 +541,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Projects/LEDNotifier/makefile b/Projects/LEDNotifier/makefile
index 4b168b4bc5..39e8a11acf 100644
--- a/Projects/LEDNotifier/makefile
+++ b/Projects/LEDNotifier/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = BUI
+BOARD = BUI
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile
index e168aa46a6..3773dfeeff 100644
--- a/Projects/Magstripe/makefile
+++ b/Projects/Magstripe/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = NONE
+BOARD = NONE
# Processor frequency.
@@ -533,7 +533,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -544,7 +544,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Projects/MissileLauncher/makefile b/Projects/MissileLauncher/makefile
index 082df26687..7df04f3b3a 100644
--- a/Projects/MissileLauncher/makefile
+++ b/Projects/MissileLauncher/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -518,7 +518,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -529,7 +529,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Projects/RelayBoard/makefile b/Projects/RelayBoard/makefile
index 5dc0184ace..0672354c3e 100644
--- a/Projects/RelayBoard/makefile
+++ b/Projects/RelayBoard/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Projects/TempDataLogger/makefile b/Projects/TempDataLogger/makefile
index ef31c50261..4f04ce5db4 100644
--- a/Projects/TempDataLogger/makefile
+++ b/Projects/TempDataLogger/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -532,7 +532,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -543,7 +543,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Projects/USBtoSerial/makefile b/Projects/USBtoSerial/makefile
index b85e7a3b95..4aaf262f6a 100644
--- a/Projects/USBtoSerial/makefile
+++ b/Projects/USBtoSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -522,7 +522,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Projects/Webserver/makefile b/Projects/Webserver/makefile
index 1f9bb9ab32..28dc05ba02 100644
--- a/Projects/Webserver/makefile
+++ b/Projects/Webserver/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -556,7 +556,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -567,7 +567,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Projects/XPLAINBridge/makefile b/Projects/XPLAINBridge/makefile
index 42807d1ab3..3088442298 100644
--- a/Projects/XPLAINBridge/makefile
+++ b/Projects/XPLAINBridge/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = XPLAIN
+BOARD = XPLAIN
# Processor frequency.
@@ -547,7 +547,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -558,7 +558,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset