diff options
Diffstat (limited to 'LUFA/Drivers')
22 files changed, 24 insertions, 24 deletions
diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h index 11c31910a5..02550a1db4 100644 --- a/LUFA/Drivers/Board/Buttons.h +++ b/LUFA/Drivers/Board/Buttons.h @@ -99,7 +99,7 @@ /* Pseudo-Functions for Doxygen: */ #if defined(__DOXYGEN__) - /** Initializes the BUTTONS driver, so that the current button position can be read. This sets the appropriate + /** Initialises the BUTTONS driver, so that the current button position can be read. This sets the appropriate * I/O pins to an inputs with pull-ups enabled. * * This must be called before any Button driver functions are used. diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h index a3975e1057..92eae7a8f8 100644 --- a/LUFA/Drivers/Board/Dataflash.h +++ b/LUFA/Drivers/Board/Dataflash.h @@ -92,7 +92,7 @@ #define DATAFLASH_CHIP_MASK(index) __GET_DATAFLASH_MASK(index) /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void); diff --git a/LUFA/Drivers/Board/EVK527/Dataflash.h b/LUFA/Drivers/Board/EVK527/Dataflash.h index 612c679086..4440d76ba7 100644 --- a/LUFA/Drivers/Board/EVK527/Dataflash.h +++ b/LUFA/Drivers/Board/EVK527/Dataflash.h @@ -85,7 +85,7 @@ #define DATAFLASH_PAGES 8192 /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h index 2953b72afe..4119a9be5a 100644 --- a/LUFA/Drivers/Board/Joystick.h +++ b/LUFA/Drivers/Board/Joystick.h @@ -90,7 +90,7 @@ /* Pseudo-Functions for Doxygen: */ #if defined(__DOXYGEN__) - /** Initializes the joystick driver so that the joystick position can be read. This sets the appropriate + /** Initialises the joystick driver so that the joystick position can be read. This sets the appropriate * I/O pins to inputs with their pull-ups enabled. */ static inline void Joystick_Init(void); diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h index 07289bc161..b8e45559f4 100644 --- a/LUFA/Drivers/Board/LEDs.h +++ b/LUFA/Drivers/Board/LEDs.h @@ -58,7 +58,7 @@ * * \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If * a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect. - * If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D + * If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D * switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when * a non-existing LED is referenced in application code. Note that this means that it is possible to make * compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers) @@ -133,7 +133,7 @@ /* Pseudo-Functions for Doxygen: */ #if defined(__DOXYGEN__) - /** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port + /** Initialises the board LED driver so that the LEDs can be controlled. This sets the appropriate port * I/O pins as outputs, and sets the LEDs to default to off. */ static inline void LEDs_Init(void); diff --git a/LUFA/Drivers/Board/STK525/Dataflash.h b/LUFA/Drivers/Board/STK525/Dataflash.h index 2903e56bb4..2a1f707140 100644 --- a/LUFA/Drivers/Board/STK525/Dataflash.h +++ b/LUFA/Drivers/Board/STK525/Dataflash.h @@ -85,7 +85,7 @@ #define DATAFLASH_PAGES 8192 /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/STK526/Dataflash.h b/LUFA/Drivers/Board/STK526/Dataflash.h index c7b118ea5b..cb412440c1 100644 --- a/LUFA/Drivers/Board/STK526/Dataflash.h +++ b/LUFA/Drivers/Board/STK526/Dataflash.h @@ -85,7 +85,7 @@ #define DATAFLASH_PAGES 8192 /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h index ddba7c798a..d07446a675 100644 --- a/LUFA/Drivers/Board/Temperature.h +++ b/LUFA/Drivers/Board/Temperature.h @@ -87,7 +87,7 @@ #define TEMP_MAX_TEMP ((TEMP_TABLE_SIZE - 1) + TEMP_TABLE_OFFSET) /* Inline Functions: */ - /** Initializes the temperature sensor driver, including setting up the appropriate ADC channel. + /** Initialises the temperature sensor driver, including setting up the appropriate ADC channel. * This must be called before any other temperature sensor routines. * * \pre The ADC itself (not the ADC channel) must be configured separately before calling the diff --git a/LUFA/Drivers/Board/USBKEY/Dataflash.h b/LUFA/Drivers/Board/USBKEY/Dataflash.h index b81510f0c4..27ff34e076 100644 --- a/LUFA/Drivers/Board/USBKEY/Dataflash.h +++ b/LUFA/Drivers/Board/USBKEY/Dataflash.h @@ -88,7 +88,7 @@ #define DATAFLASH_PAGES 8192 /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/XPLAIN/Dataflash.h b/LUFA/Drivers/Board/XPLAIN/Dataflash.h index 7e2719cf39..c1b8cd6728 100644 --- a/LUFA/Drivers/Board/XPLAIN/Dataflash.h +++ b/LUFA/Drivers/Board/XPLAIN/Dataflash.h @@ -91,7 +91,7 @@ #endif /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h index 835fee47eb..098245d6dc 100644 --- a/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h +++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h @@ -350,7 +350,7 @@ return ADC_GetResult(); } - /** Initializes the ADC, ready for conversions. This must be called before any other ADC operations. + /** Initialises the ADC, ready for conversions. This must be called before any other ADC operations. * The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and * prescaler masks. * diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h index e2c3d6a105..5111059851 100644 --- a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h +++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h @@ -71,7 +71,7 @@ /* Public Interface - May be used in end-application: */ /* Inline Functions: */ - /** Initializes the TWI hardware into master mode, ready for data transmission and reception. This must be + /** Initialises the TWI hardware into master mode, ready for data transmission and reception. This must be * before any other TWI operations. */ static inline void TWI_Init(void) ATTR_ALWAYS_INLINE; diff --git a/LUFA/Drivers/Peripheral/SPI.h b/LUFA/Drivers/Peripheral/SPI.h index 5bd7df4484..c6db9f9623 100644 --- a/LUFA/Drivers/Peripheral/SPI.h +++ b/LUFA/Drivers/Peripheral/SPI.h @@ -113,7 +113,7 @@ #define SPI_MODE_MASTER (1 << MSTR) /* Inline Functions: */ - /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other + /** Initialises the SPI subsystem, ready for transfers. Must be called before calling any other * SPI routines. * * \param[in] SPIOptions SPI Options, a mask consisting of one of each of the SPI_SPEED_*, diff --git a/LUFA/Drivers/Peripheral/Serial.h b/LUFA/Drivers/Peripheral/Serial.h index 4eb74b9d24..23bbd6a4bb 100644 --- a/LUFA/Drivers/Peripheral/Serial.h +++ b/LUFA/Drivers/Peripheral/Serial.h @@ -90,7 +90,7 @@ void Serial_TxString(const char* StringPtr) ATTR_NON_NULL_PTR_ARG(1); /* Inline Functions: */ - /** Initializes the USART, ready for serial data transmission and reception. This initializes the interface to + /** Initialises the USART, ready for serial data transmission and reception. This initialises the interface to * standard 8-bit, no parity, 1 stop bit settings suitable for most applications. * * \param[in] BaudRate Serial baud rate, in bits per second. diff --git a/LUFA/Drivers/Peripheral/SerialStream.h b/LUFA/Drivers/Peripheral/SerialStream.h index 9a40048f6d..938d8f0164 100644 --- a/LUFA/Drivers/Peripheral/SerialStream.h +++ b/LUFA/Drivers/Peripheral/SerialStream.h @@ -82,7 +82,7 @@ /* Public Interface - May be used in end-application: */ /* Inline Functions: */ - /** Initializes the serial stream (and regular USART driver) so that both the stream and regular + /** Initialises the serial stream (and regular USART driver) so that both the stream and regular * USART driver functions can be used. Must be called before any stream or regular USART functions. * * \param[in] BaudRate Baud rate to configure the USART to. diff --git a/LUFA/Drivers/USB/Class/Common/RNDIS.h b/LUFA/Drivers/USB/Class/Common/RNDIS.h index a6549c5e3d..ab0126e24e 100644 --- a/LUFA/Drivers/USB/Class/Common/RNDIS.h +++ b/LUFA/Drivers/USB/Class/Common/RNDIS.h @@ -96,7 +96,7 @@ /** Enum for the possible NDIS adapter states. */ enum RNDIS_States_t { - RNDIS_Uninitialized = 0, /**< Adapter currently uninitialized. */ + RNDIS_Uninitialized = 0, /**< Adapter currently uninitialised. */ RNDIS_Initialized = 1, /**< Adapter currently initialized but not ready for data transfers. */ RNDIS_Data_Initialized = 2, /**< Adapter currently initialized and ready for data transfers. */ }; diff --git a/LUFA/Drivers/USB/Class/Device/MIDI.h b/LUFA/Drivers/USB/Class/Device/MIDI.h index 9ea3deae5b..e733bfecdc 100644 --- a/LUFA/Drivers/USB/Class/Device/MIDI.h +++ b/LUFA/Drivers/USB/Class/Device/MIDI.h @@ -129,7 +129,7 @@ /** Flushes the MIDI send buffer, sending any queued MIDI events to the host. This should be called to override the - * \ref MIDI_Device_SendEventPacket() function's packing behavior, to flush queued events. + * \ref MIDI_Device_SendEventPacket() function's packing behaviour, to flush queued events. * * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state. * diff --git a/LUFA/Drivers/USB/Class/Host/MIDI.h b/LUFA/Drivers/USB/Class/Host/MIDI.h index 0d126b880b..2cfb56e57a 100644 --- a/LUFA/Drivers/USB/Class/Host/MIDI.h +++ b/LUFA/Drivers/USB/Class/Host/MIDI.h @@ -143,7 +143,7 @@ MIDI_EventPacket_t* const Event) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); /** Flushes the MIDI send buffer, sending any queued MIDI events to the device. This should be called to override the - * \ref MIDI_Host_SendEventPacket() function's packing behavior, to flush queued events. Events are queued into the + * \ref MIDI_Host_SendEventPacket() function's packing behaviour, to flush queued events. Events are queued into the * pipe bank until either the pipe bank is full, or \ref MIDI_Host_Flush() is called. This allows for multiple MIDI * events to be packed into a single pipe packet, increasing data throughput. * diff --git a/LUFA/Drivers/USB/Class/Host/RNDIS.h b/LUFA/Drivers/USB/Class/Host/RNDIS.h index 34bbbb1837..b1518ffed3 100644 --- a/LUFA/Drivers/USB/Class/Host/RNDIS.h +++ b/LUFA/Drivers/USB/Class/Host/RNDIS.h @@ -158,7 +158,7 @@ */ uint8_t RNDIS_Host_SendKeepAlive(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - /** Initializes the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been + /** Initialises the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been * configured via the call to \ref RNDIS_Host_ConfigurePipes(). * * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state. diff --git a/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h b/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h index 61dda2cbc7..001653b522 100644 --- a/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h +++ b/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h @@ -218,7 +218,7 @@ * function. The routine updates the position and remaining configuration descriptor bytes values * automatically. If a comparator routine fails a search, the descriptor pointer is retreated back * so that the next descriptor search invocation will start from the descriptor which first caused the - * original search to fail. This behavior allows for one comparator to be used immediately after another + * original search to fail. This behaviour allows for one comparator to be used immediately after another * has failed, starting the second search from the descriptor which failed the first. * * Comparator functions should be standard functions which accept a pointer to the header of the current diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h index 42b0ec7d82..5c295b61fc 100644 --- a/LUFA/Drivers/USB/HighLevel/Events.h +++ b/LUFA/Drivers/USB/HighLevel/Events.h @@ -189,7 +189,7 @@ * \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller. * this means that the current connection state is derived from the bus suspension and wake up events by default, * which is not always accurate (host may suspend the bus while still connected). If the actual connection state - * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by * passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. * \n\n @@ -207,7 +207,7 @@ * \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller. * this means that the current connection state is derived from the bus suspension and wake up events by default, * which is not always accurate (host may suspend the bus while still connected). If the actual connection state - * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by * passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. * \n\n diff --git a/LUFA/Drivers/USB/LowLevel/USBController.h b/LUFA/Drivers/USB/LowLevel/USBController.h index f26f773601..f0db7faf4c 100644 --- a/LUFA/Drivers/USB/LowLevel/USBController.h +++ b/LUFA/Drivers/USB/LowLevel/USBController.h @@ -264,7 +264,7 @@ * Valid mode masks are \ref USB_MODE_DEVICE, \ref USB_MODE_HOST or \ref USB_MODE_UID. * * \param[in] Options Mask indicating the options which should be used when initializing the USB - * interface to control the USB interface's behavior. This should be comprised of + * interface to control the USB interface's behaviour. This should be comprised of * a USB_OPT_REG_* mask to control the regulator, a USB_OPT_*_PLL mask to control the * PLL, and a USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device * mode speed. |