diff options
Diffstat (limited to 'keyboards/ploopyco/trackball/readme.md')
-rw-r--r-- | keyboards/ploopyco/trackball/readme.md | 25 |
1 files changed, 16 insertions, 9 deletions
diff --git a/keyboards/ploopyco/trackball/readme.md b/keyboards/ploopyco/trackball/readme.md index c668c5dd03..cca2c15114 100644 --- a/keyboards/ploopyco/trackball/readme.md +++ b/keyboards/ploopyco/trackball/readme.md @@ -1,27 +1,34 @@ -# Ploopyco Trackball +# Ploopy Classic Trackball - + It's a DIY, QMK Powered Trackball!!!! -* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/) -* Hardware Supported: ATMega32u4 8MHz(3.3v) +* Keyboard Maintainer: [Ploopy](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/) +* Hardware Supported: ATMega32u4 8MHz(3.3v), Raspberry RP2040 * Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco) Make example for this keyboard (after setting up your build environment): - make ploopyco/trackball/rev1:default:flash + make ploopyco/trackball/rev1_004:default:flash make ploopyco/trackball/rev1_005:default:flash - -To jump to the bootloader, hold down "Button 4" (immediate right of the trackball) + make ploopyco/trackball/rev1_007:default:flash + +To jump to the bootloader, hold down "Button 4" (immediate right of the trackball) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). ## Revisions -There are two main revisions for the PloopyCo Trackball, everything up to 1.004, and 1.005-1.006. +There are three main revisions for the Ploopy Classic Trackball: + +- Everything up to 1.004 (very rare) +- Revision 1.005 and 1.006 (commonly sold between 2020 and 2024) +- Revision 1.007 (first available in 2025) + +In the 1.005 revision, button four was changed from pin B5 to B6, and the debug LED pin was changed from F7 to B5. -In the 1.005 revision, button for was changed from pin B5 to B6, and the debug LED pin was changed from F7 to B5. +In the 1.007 revision, the board was switched from an ATMega32u4 architecture to the Raspberry RP2040 architecture. The PCB should indicate which revision this is. |