diff options
Diffstat (limited to 'keyboards/takashicompany/palmslave/readme.md')
-rw-r--r-- | keyboards/takashicompany/palmslave/readme.md | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/keyboards/takashicompany/palmslave/readme.md b/keyboards/takashicompany/palmslave/readme.md new file mode 100644 index 0000000000..ea51a41ef7 --- /dev/null +++ b/keyboards/takashicompany/palmslave/readme.md @@ -0,0 +1,39 @@ +# Palmslave + + + +Palmslave is a split keyboard with 0.8u (16mm) key pitch. +The size of a single key is 80% of the size of a key on a conventional keyboard. +Although the key size is more compact than usual, it has the advantage of requiring minimal finger movement. +The number of keys is 19 keys for one hand and 38 keys for two hands. +Keyswitches are compatible with Choc v1 and Choc v2. +The board can be fitted with a key switch socket, allowing the keyswitch to be replaced according to mood or fashion. + +Palmslaveは0.8u(16mm)キーピッチの分割型のキーボードです。 +一つのキーの大きさが従来のキーボードのキーと比較すると80%のサイズとなっています。 +通常よりコンパクトなキーサイズですが、指の動きが最小限で済むという強みがあります。 +キー数は片手で19キー、両手で38キーとなります。 +キースイッチはChoc v1とChoc v2に対応しています。 +基板はキースイッチソケットの取り付けが可能で、気分や流行でキースイッチを付け替えることが可能です。 + +* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany) +* Hardware Supported: Palmslave PCB(s), x2 Pro Micro development board +* Hardware Availability: https://github.com/takashicompany/palmslave + +Make example for this keyboard (after setting up your build environment): + + make takashicompany/palmslave:default + +Flashing example for this keyboard: + + make takashicompany/palmslave:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |