diff options
Diffstat (limited to 'keyboards/typek/readme.md')
-rw-r--r-- | keyboards/typek/readme.md | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/keyboards/typek/readme.md b/keyboards/typek/readme.md new file mode 100644 index 0000000000..e7521e2e71 --- /dev/null +++ b/keyboards/typek/readme.md @@ -0,0 +1,30 @@ +# gok TypeK QMK Firmware Folder + + + +## Introduction + +This is the QMK Firmware repository for the Type K, the tented ergo by Gok. The TypeK went through GB on August, 2023. It is supported by a proprietary PCB ecosystem. + +## How to flash + +### Enter bootloader + +The DFU state in the bootloader can be accessed in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key, escape in the default keymap) and plug in the keyboard; +* **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds; +* **Keycode in layout**: Press the key mapped to `RESET`; in the default layout, that is top left key ('escape') in layer 1. + +### How to compile and flash + + +After setting up your build environment, you can compile the Iron 165R2 default keymap by using one of the options below. + + make typek:default + +And use dfu-util in the command line or through a GUI like QMK toolbox to upload the firmware to the PCB. To directly flash the PCB after it is put into a DFU state, use: + + make typek:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |