aboutsummaryrefslogtreecommitdiff
path: root/keyboards/typek/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/typek/readme.md')
-rw-r--r--keyboards/typek/readme.md30
1 files changed, 30 insertions, 0 deletions
diff --git a/keyboards/typek/readme.md b/keyboards/typek/readme.md
new file mode 100644
index 0000000000..e7521e2e71
--- /dev/null
+++ b/keyboards/typek/readme.md
@@ -0,0 +1,30 @@
+# gok TypeK QMK Firmware Folder
+
+![TK](https://i.imgur.com/0ZEbEZt.jpg)
+
+## Introduction
+
+This is the QMK Firmware repository for the Type K, the tented ergo by Gok. The TypeK went through GB on August, 2023. It is supported by a proprietary PCB ecosystem.
+
+## How to flash
+
+### Enter bootloader
+
+The DFU state in the bootloader can be accessed in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key, escape in the default keymap) and plug in the keyboard;
+* **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds;
+* **Keycode in layout**: Press the key mapped to `RESET`; in the default layout, that is top left key ('escape') in layer 1.
+
+### How to compile and flash
+
+
+After setting up your build environment, you can compile the Iron 165R2 default keymap by using one of the options below.
+
+ make typek:default
+
+And use dfu-util in the command line or through a GUI like QMK toolbox to upload the firmware to the PCB. To directly flash the PCB after it is put into a DFU state, use:
+
+ make typek:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).